C4334 IBM AS/400 ENUS103 239
User Manual: IBM AS/400
Open the PDF directly: View PDF .
Page Count: 18
Download | |
Open PDF In Browser | View PDF |
Hardware Announcement September 9, 2003 New IBM TotalStorage Enterprise Tape Drive 3592 and new models of the IBM TotalStorage Enterprise Automated Tape Library 3494 enhance performance and capacity Overview • The IBM TotalStorage Enterprise Automated Tape Library 3494 is designed to provide cost effective, reliable, and space-efficient tape automation for a broad range of computing environments, including selected IBM zSeries , S/390 , IBM iSeries , AS/400 , IBM pSeries , RS/6000 , IBM xSeries , Sun, and Hewlett Packard servers, as well as Intel -compatible servers running Microsoft Windows and Linux. The new IBM TotalStorage Enterprise Tape Drive 3592 Model J1A can be installed in new models of the 3494. The 3592 Model J1A is designed to provide improved performance and higher capacity than the IBM TotalStorage Enterprise Tape Drive 3590. The 3592 Model J1A Tape Drive has a dual-ported switched fabric 2-Gbps Fibre Channel attachment with a native data rate of up to 40 MB/sec, over 2.5 times the 14 MB/sec data rate of the 3590 E or H Models. It also has a native cartridge capacity of up to 300 GB (900 GB with 3:1 compression), five times more than the 60 GB maximum native capacity of a 3590 H Model. • Three new 3494 frames are being introduced that can contain the new Enterprise Tape Drive 3592 Model J1A. Since the 3592 Tape Drive is smaller, these new frames will hold twice the number of tape drives than the corresponding frame with 3590 Tape Drives. • 3494 Model L22: Up to four 3592 Tape Drives 3494 Model D22: Up to twelve 3592 Tape Drives 3494 Model D24: Up to eight 3592 Tape Drives and an IBM TotalStorage Enterprise Tape Controller 3592 Model J70 or TotalStorage Enterprise Tape Controller 3590 Model A60 These advancements in performance, capacity, and footprint may help reduce the number of tape drives, cartridges, and automation frames required as well as the associated floor space required. The 3592 Tape Drive and its associated media can co-exist in the same Enterprise Tape Library 3494 as 3590 Tape Drives and their media, and 3490 Tape Drives and their media, helping to protect your automation investment and ease migration to the new tape drive. At a glance The new IBM TotalStorage Enterprise Automated Tape Library 3494 Models L22, D22, and D24 with the IBM TotalStorage Enterprise Tape Drive 3592 Model J1A offers a dramatic improvement in performance and capacity for Enterprise Class tape customers who currently use the IBM TotalStorage Enterprise Tape Drive 3590. These enhancements include: • Up to 40 MB/sec native data rate, over 2.5 times the 14 MB/sec for the 3590 E or H Models • 300 GB native cartridge capacity, a 5 times increase over the 60 GB capacity of the 3590 H Models • Dual-ported switched fabric 2-Gbps Fibre Channel attachment • Small form factor that allows double the drives in a single 3494 frame, as compared to the 3590 Tape Drive • Intermix of 3592, 3590, and 3490 Tape Drives and media in the same 3494 library for added flexibility Key prerequisites The Enterprise Tape Drive 3592 Model J1A is supported in an Enterprise Tape Library 3494 Model L22, D22, or D24 on selected Fibre Channel, ESCON , or FICON servers. Refer to the Technical information section for details. Planned availability dates • February 6, 2004: Feature numbers 8802 and 8820 • October 31, 2003: All models and other features For ordering, contact: Your IBM representative, an IBM Business Partner, or the Americas Call Centers at 800-IBM-CALL Reference: YE001 This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: http://www.ibm.com. IBM United States IBM is a registered trademark of International Business Machines Corporation. 103-239 Description half-inch tape drives such as the IBM 3480, 3490, or 3490E. The Enterprise Tape Drive 3592 Model J1A is a follow-on to the highly successful Enterprise Tape Drive 3590. It is designed for high-performance tape applications, including: The 3592 Model J1A is designed for high-performance computing environments where reliability, capacity, and performance are important. You should consider it in 3494 environments where: • High-speed data save operations where backup windows are critical, and large amounts of data are archived to tape. • Space allocated to tape cartridges needs to be reduced within automation solutions or offline storage • • Large-scale automated tape environments where performance and reliability are required. These are primarily half-inch tape drive environments. Backup windows are growing and there is a need for high-performance tape drives to backup larger amounts of data in less time • • Large-scale mass data archive applications where massive amounts of data need to be quickly saved to tape for storage and later recall (examples include the seismic industry, data warehousing, and record management applications). A Fibre Channel attached drive with native switched fabric capability is required The Enterprise Tape Library 3494, with the 3592 Model J1A, should also be considered in other large scale tape environments, such as: The 3592 Model J1A is the first model of a new family of tape products that are designed to meet the growing needs of both new and existing IBM tape customers across a wide range of environments. Advantages of the Enterprise Tape Drive 3592 Model J1A with the Enterprise Tape Library 3494 include: • High-speed data save operations where backup windows are critical, and large amounts of data are archived to tape • Large-scale automated tape installations where performance, capacity, and reliability are needed • Large-scale mass data archive applications where massive amounts of data need to be quickly saved to tape for storage and later recall (examples include the seismic industry, data warehousing, and record management applications) • Higher performance, which help can reduce the number of tape drives required • Larger capacity, to help you reduce the number of cartridges required and the amount of floor space needed • Smaller form factor, which can help you reduce the automation foot print Statement of general direction • Dual-ported native switched fabric interface, designed to enhance attachment flexibility • High reliability, to help you improve operations IBM intends to support the new IBM TotalStorage Enterprise Tape Drive 3592 Model J1A in the IBM TotalStorage Virtual Tape Server Models B10 and B20. This is intended to provide additional storage efficiency by allowing more capacity in the same library footprint. All information being released represents IBM′s current intent, is subject to change or withdrawal, and represents only goals and objectives. Three new 3494 Frames are being introduced that can contain the new Enterprise Tape Drive 3592 Model J1A. Due to the smaller size of the 3592 Tape Drive, these new frames can hold twice the number of drives than the corresponding frame with 3590 Tape Drives: • 3494 Model L22: Up to four 3592 tape drives • 3494 Model D22: Up to twelve 3592 tape drives • 3494 Model D24: Up to eight 3592 tape drives and an IBM TotalStorage Enterprise Tape Controller 3592 Model J70 or TotalStorage Enterprise Tape Controller 3590 Model A60 All statements regarding IBM′s plans, directions, and intent are subject to change or withdrawal without notice. In addition, field upgrades are available that enable conversion of an installed 3494 Frame that contains 3490 or 3590 Tape Drives to one of the new frames for 3592 drives. For more details on the Enterprise Tape Drive 3592 Model J1A, refer to Hardware Announcement 103-235, dated September 9, 2003. Product positioning The Enterprise Tape Drive 3592 Model J1A is the follow-on to the highly successful Enterprise Tape Drive 3590. The Enterprise Tape Library 3494 with the 3592 Model J1A is supported in a wide range of environments including selected zSeries, S/390, iSeries, AS/400, pSeries, RS/6000, xSeries, Sun, and Hewlett Packard servers, as well as Intel-compatible servers running Linux and Microsoft Windows NT , Windows 2000, or Windows Server 2003. It offers significant performance and capacity benefits over the IBM 3590, and over other 103-239 -2- Reference information Refer to: • The IBM TotalStorage Enterprise Tape Drive 3592 Model J1A in Hardware Announcement 103-235, dated September 9, 2003 • The IBM TotalStorage Enterprise Tape Drive 3592 attachment in the IBM TotalStorage Silo Compatible Tape Drive Frame 3592 Model C20 in Hardware Announcement 103-233, dated September 9, 2003 • The IBM TotalStorage Enterprise Tape Drive 3592 attachment to ESCON/FICON channels through the IBM TotalStorage Enterprise Tape Controller 3590 Model A60 in Hardware Announcement 103-237, dated September 9, 2003 • The IBM TotalStorage Enterprise Tape Drive 3592 attachment to ESCON/FICON channels through the IBM TotalStorage Enterprise Tape Controller 3592 Model J70 in Hardware Announcement 103-236, dated September 9, 2003 • The IBM TotalStorage Enterprise Tape Cartridge 3592 available with new models of the 3599 in Hardware Announcement 103-238, dated September 9, 2003 Trademarks The e-business logo, TotalStorage, iSeries, pSeries, and FICON are trademarks of International Business Machines Corporation in the United States or other countries or both. S/390, zSeries, AS/400, RS/6000, xSeries, and ESCON are registered trademarks of International Business Machines Corporation in the United States or other countries or both. Intel is a registered trademark of Intel Corporation. Microsoft is a trademark of Microsoft Corporation. Windows and Windows NT are registered trademarks of Microsoft Corporation. Other company, product, and service names may be trademarks or service marks of others. -3- 103-239 IBM US Announcement Supplemental Information September 9, 2003 Publications A revised copy of the IBM TotalStorage Enterprise Automated Tape Library (3494) Introduction and Planning Guide (GA32-0448) is available now by selecting “Tape Publications” from this Web site: 3494 Model D24: • Width: 750 mm (29.3 in) • Depth: 1,525 mm (60.04 in) • Height: 1,800 mm (70.9 in) • Weight: 320 kg (704 lb) without drives, controller, and cartridges • Weight: 582.7 kg (1,119 lb) maximum with 8 drives, controller and cartridges http://www.storage.ibm.com/tape/pubs A revised copy of the IBM TotalStorage Enterprise Automated Tape Library (3494) Operator Guide (GA32-0449) will be available concurrent with planned availability. The Publication Notification System (PNS) is available by order number/ product number. Customers currently subscribing to PNS will automatically receive notifications by e-mail. Customers who wish to subscribe, can visit the PNS Web site location at: Operating environment • Temperature: 10° to 32° C (50° to 90° F) • Relative humidity: 20% to 80% • Wet bulb temperature: 23.0° C (73.4° F) • Caloric value: http://service5.boulder.ibm.com/ pnsrege.nsf/messages/welcome The publications listed on the notification can be ordered by calling the Pubs Support Group in Raleigh at 800-879-2755, option 1. − − − • http://www.ibm.com/shop/publications/order The Publications Center is a worldwide central repository for IBM product publications and marketing material with a catalog of 70,000 items. Extensive search facilities are provided, as well as payment options via credit card. Furthermore, a large number of publications are available online in various file formats, which can currently be downloaded free of charge. Note that PNS subscribers most often order their publications via the Publications Center. Technical information Specified operating environment Physical specifications 3494 Model L22: • • • • • Width: 750 mm (29.3 in) Depth: 1,525 mm (60.04 in) Height: 1,800 mm (70.9 in) Weight: 501.4 kg (1,105 lb) without cartridges Weight: 558.8 kg (1,232 lb) with cartridges 3494 Model D22: • • • • • Width: 750 mm (29.3 in) Depth: 1,525 mm (60.04 in) Height: 1,800 mm (70.9 in) Weight: 320 kg (704 lb) without drives and cartridges Weight: 552 kg (1,217 lb) with 12 drives and cartridges Electrical power: − − − The IBM Publications Center Portal: • 2730 Btu/Hour (Model L22) 4100 Btu/Hour (Model D22) 4100 Btu/Hour (Model D24) 1.0 kVA (Model L22 with 4 drives) 1.4 kVA (Model D22 with 12 drives) 1.4 kVA (Model D24 with controller and 8 drives) Capacity of exhaust: − − − 6.5 Cubic meter/min (Model L22) 16.9 Cubic meter/min (Model D22) 14.1 Cubic meter/min (Model D24) • Noise level: 7.4 bels operating, 6.9 bels idle • Operating current: 8.0 amps • Leakage current: 3.0 milliamps • Starting inrush current: 200 amps for 4 milliseconds Hardware requirements: The 3592 Model J1A Tape Drive is for installation in an Enterprise Tape Library 3494 with the appropriate features. The 3494 with the 3592 Model J1A is supported on selected RS/6000 , IBM pSeries , AS/400 , IBM iSeries , Hewlett Packard, and Sun servers, as well as selected Intel -based servers with Microsoft Windows or Linux. The appropriate Fibre Channel host bus adapter and software are required. For more details on specific hardware, software, and Fibre Channel adapter support for the 3592, refer to the following Web site: http://www.storage.ibm.com/tape/drives/ 3592/3592opn.pdf The 3494 with the 3592 Model J1A is also supported on selected IBM zSeries servers with Linux. The appropriate FICON adapter (with Fibre Channel protocol support) and software are required. For more details on This announcement is provided for your information only. For additional information, contact your IBM representative, call 800-IBM-4YOU, or visit the IBM home page at: http://www.ibm.com. IBM United States IBM is a registered trademark of International Business Machines Corporation. 103-239 Controller, or the LC Fibre Drive Attachment feature (#3473) is installed on the contained 3590 Model A60 Controller. specific hardware, software, and Fibre Channel adapter support for the 3592, refer to the following Web site: http://www.storage.ibm.com/tape/drives/ 3592/3592opn.pdf • The 3592 Model J1A Tape Drive in an Enterprise Tape Library 3494 is supported with a variety of best-of-breed Fibre Channel switch offerings. For more details on the exact switch support for the 3592, refer to the appropriate switch interoperability matrix located at the following Web site: http://ssddom02.storage.ibm.com/techsup/ webnav.nsf/support/san The 3592 is also supported on selected S/390 and z/Series servers with ESCON and FICON attachment through the Enterprise Tape Controller 3592 Model J70 or Enterprise Tape Controller 3590 Model A60. Refer to Hardware Announcement 103-236, dated September 9, 2003, Hardware Announcement 103-237, dated September 9, 2003, the 3592 Model J70 Sales Manual, or the 3590 Model A60 Sales Manual for more details on the prerequisites for this support. The 3592 Model J1A Tape Drive is supported within the Model L22 for Fibre-Channel attachment to host systems. The tape drives can alternatively be attached to a 3590 Model A60 Controller in an adjacent Model D24 frame for ESCON or FICON attachment to host systems. The Model L22 can have zero to four tape drives installed. The following models are supported for attachment to the Model L22: Model Model Model Model Model Model Model Model Model Model Model Model Model B10 B16 B18 B20 CX0 CX1 D10 D12 D22 D14 D24 HA1 S10 There must be eight 3592 Tape Drives in the Model D24. − Feature number 3464 (SC Fibre Drive Attached Controller) for attachment using a 2109 Model S16 Switch must be specified on new Model D24 orders, or on an MES for an existing Model D24, when the Fibre Drive Attached SC Switch feature (#3483) is installed on the contained 3592 Model J70 Controller, or the Fibre Drive Attachment feature (#3463) is installed on the contained 3590 Model A60 Controller. − Feature number 3474 (LC Fibre Drive Attached Controller) for attachment using a 2109 Model F16 Switch must be specified on new Model D24 orders, or on an MES for an existing Model D24, when the Fibre Drive Attached LC Switch feature (#3484) is installed on the contained 3592 Model J70 103-239 − Feature number 4065 (Adjacent Frame 3592 Tape Drives with SC Attachment) must be specified on a new or MES Model D22 or L22 when feature number 3464 (SC Fibre Drive Attached Controller) is installed on the adjacent Model D24. − Feature number 4075 (Adjacent Frame 3592 Tape Drives with LC Attachment) must be specified on a new or MES Model D22 or L22 when feature number 3474 (LC Fibre Drive Attached Controller) is installed on the adjacent Model D24. The standard 3494 allows four RS232 host connections and four tape control unit connections. The Expansion Attachment Card feature number 5229 provides an additional four RS232 host connections and four tape control unit connections. The Tape Control Unit Expansion feature number 5228 can convert the four host connections to four tape control unit connections on either the standard 3494 or the Expansion Attachment Card, providing a total of up to 16 tape control unit connections. The 32-Port Attachment feature number 5227 provides an additional 16 tape control unit connections. Up to 32 SCSI or Fibre-Channel attached tape drives can be installed in a single library. A Model B16 VTS requires one host connection and two control unit connections, plus from three to six additional control unit connections for the drives in the associated Model D12. Thus, a 3494 that contains a Model B16 VTS can have up to ten other tape control units installed, depending on the number of associated 3590 drives and the quantity of feature number 5228 installed (or up to 26 with feature number 5227 installed), with the actual maximum number as shown below: Model D24: − There can be up to four drives in an adjacent Model L22 or D22. When a Model B18 VTS is attached, feature number 5232 (Attachment Concentrator), and feature number 9020 (Model B18 VTS Attachment) are required on the Model L22. Adjacent Fibre Channel attachment for up to twelve 3592 Model J1A Tape Drives attached to a 3592 Model J70 or 3590 Model A60 Controller in an adjacent 3494 Model D24 Frame is allowed as follows: • − One feature number 9002 must be applied to the Model L22 for each Model S10 that is attached in the first eight frames. One feature number 9003 must be applied to the Model L22 for each Model D10, D12, D22, D14, or D24 that is attached in the first eight frames. One feature number 9004 must be applied to the Model L22 and also each Model S10 that is attached in a 3494 beyond the first eight frames. One feature number 9005 must be applied to the Model L22 and also each Model D10, D12, D22, D14, or D24 that is attached in a 3494 beyond the first eight frames. One feature number 9006 must be applied to the Model L22 for each Model B16 VTS that is attached in the first eight frames. One feature number 9007 must be applied to the Model L22 and to the Model B16 VTS that is attached in a 3494 beyond the first eight frames. This is required to assure that proper cables are shipped and configuration records are correct. One feature number 5228 (Tape Control Unit Expansion) and feature number 5229 (Expansion Attachment Card) are also required on the Model L22 when a Model B16 VTS is attached. To enable both accessors with attached Model HA1 Frames to operate simultaneously, the Dual Active Accessor (DAA) feature number 5050 must be specified. When a Model B10, B18, or B20 VTS is attached, feature number 5232 (Attachment Concentrator) and feature number 9020 (Model B20, B10, or B18 VTS Attachment) are required on the Model L22. Model L22 • • • • • • • • • • • • • Model D22 or L22: -2- Maximum number of Tape Control Units (When Model B16 VTS installed) Model D22 3494-B16 Configuration One feature number 5228 Two feature numbers 5228 Three 3590 drives in associated D12 Four 3590 drives in associated D12 Five 3590 drives in associated D12 Six 3590 drives in associated D12 7 6 5 4 10 9 8 7 The Model D22 Tape Drive Expansion Frame must be attached to a Tape Library Base Frame Model L10, L12, L14, or L22. Each 3592 Tape Drive installed in a Model D22 utilizes one tape control unit connection of the attached Model Lxx except when these drives are attached to a 3592 Model J70 or 3590 Model A60 using Adjacent Frame Support. One feature number 9003 must be applied to the Model L10, L12, L14, or L22 for each Model D22 that is attached in the first eight frames. One feature number 9005 must be applied to the Model L10, L12, L14, and L22 and also each Model D22 that is attached in 3494s with greater than eight frames. This is required to assure that proper cables are shipped and configuration records are correct. As noted above, the enhanced PCI Library Manager feature (#5046) may be required on the 3494 Model Lxx to support the 3592 Model J1A Tape Drive. Feature number 5227 adds 16 to each of the above numbers. Note: Feature number 5228 is not required if Model HA1 Frames are attached to the 3494 Model L10, L12, L14, or L22. A Tape Control Unit is one Fibre Channel attached 3592-J1A, 3490-C1A/C2A, 3490-F1A, a SCSI-attached 3590-H1A/E1A/B1A, Fibre Channel attached 3590-H1A/E1A, or 3590-A50 or A00 in any combination. The 3490E Model F1A Control Unit (feature #3000 or #3500) requires one host RS-232 connection. The Model B16 VTS uses two tape control unit connections and one host processor connection. The 3592 Model J70 Controller or 3590 Model A60 Controller utilizes one tape control unit connection for each feature number 9061 specified. If the Model J70 or the Model A60 attaches to the Attachment Concentrator (#5232), then one feature number 9060 should be specified on the Model Lxx for each attached Model J70 or Model A60 and no tape control unit connection on the library manager is used. If the configuration of frames in an installed 3494 needs to be changed, for example, if frames must be moved to install a VTS, or if frames must be moved from one 3494 to another, then an RPQ request must be processed before the library can be reconfigured. An RPQ is required for moving feature numbers 5300, 5302, 5304, and 5400, or Models B16 VTS, D10, D12, D14, D22, D24, and S10 which will ensure that the proper cables are available. Model conversions to Model D22 When converting to a Model D22, the controller (if present) and drive features are removed as a part of the model conversion. One feature number 4674 must be ordered for each 3592 Model J1A Tape Drive that will be installed in that frame. As noted above, the enhanced PCI Library Manager feature (#5046) may be required on the 3494 Model Lxx to support the 3592 Model J1A Tape Drive. If the configuration of frames in an installed 3494 needs to be changed, for example, if frames must be moved to install a Model B16 VTS, or if frames must be moved from one 3494 to another, then an RPQ request must be processed before the library can be reconfigured. An RPQ is required for moving feature numbers 5300, 5302, 5304, and 5400, or Models B16 VTS, D10, D12, D14, D24, and S10 which will ensure that the proper cables are available. Model D24 The Model D24 Tape Drive Expansion Frame must be attached to a Tape Library Base Frame Model L10, L12, L14, or L22. Each 3592 Model J70 Controller or 3590 Model A60 Controller installed in a Model D24 utilizes one tape control unit connection of the attached Model Lxx when using an RS422 connection. The 3592 Model J70 Controller or 3590 Model A60 Controller can alternatively attach to the Attachment Concentrator feature number 5232 by specifying feature number 9060 (Attach Controller to 3494 Concentrator) which does not require a tape control unit connection on the Lxx library manager. The 3592 J1A Tape Drives are attached to the 3592 Model J70 or 3590 Model A60 Controller and so does not require any additional tape control unit connections on the library manager. This includes 3592 Tape Drives attached to the 3592 Model J70 or 3590 Model A60 with Adjacent Frame Support. The Enterprise Tape Library 3494 Model L22 will contain the new PCI library manager. The enhanced PCI Library Manager feature (#9046) must be added to each new order for a Model L22 or HA1 to indicate its presence. When upgrading to a Model L22, you can take advantage of the improved technology and performance of this library manager, by ordering the enhanced PCI Library Manager feature (#5046) with the model conversion to a Model L22. This may be required to support the 3592 Model J1A Tape Drive. Any 3494 Model L1x with feature number 9020, or one that has a library manager (LM) installed since May 15, 2000, should have a “compatible” LM that will work with the 3592 Model J1A. Any prior LM is not “compatible” and must be replaced. If the LM microcode level is at 527.xx, or later, then the LM hardware prerequisites are already satisfied. The LM microcode level can be checked by selecting “About” from the “Help” pull-down menu on the LM Operator Menu. You may need the assistance of a customer engineer to determine if the enhanced PCI Library Manager feature (#5046) must be ordered. One feature number 9003 must be applied to the Model L10, L12, L14, or L22 for each Model D24 that is attached in the first eight frames. One feature number 9005 must be applied to the Model L10, L12, L14, and L22 and also each Model D24 that is attached in 3494s with greater than eight frames. This is required to assure that proper cables are shipped and configuration records are correct. As noted above, the enhanced PCI Library Manager feature (#5046) may be required on the 3494 Model Lxx to support the 3592 Model J1A Tape Drive. Model conversions to Model L22 When converting to a Model L22, the controller (if present) and drive features are removed as a part of the model conversion. One feature number 4674 must be ordered for each 3592 Model J1A Tape Drive that will be installed in that frame. As noted above, the enhanced PCI Library Manager feature (#5046) may be required to support the 3592 Model J1A Tape Drive. If the configuration of frames in an installed 3494 needs to be changed, for example, if frames must be moved to install a VTS, or if frames must be moved from one 3494 -3- 103-239 to another, then an RPQ request must be processed before the library can be reconfigured. An RPQ is required for moving feature numbers 5300, 5302, 5304, and 5400, or Models B16 VTS, D10, D12, D14, D22, D24, and S10 which will ensure that the proper cables are available. iSeries and AS/400 • OS/400 V5.1, or later (PTFs may be required) • OS/400 V5.2 plus PTFs, or later, is required for the PCI-X Fibre Channel Tape Controller (#5704) For required PTF information, refer to informational APAR II13609 at: Model conversions to Model D24 When converting to a Model D24, controller features other than the 3590 Model A60 Controller are removed as a part of the model conversion, and the 3590 Model A60 (if not present) must be added by specifying feature number 4665. One feature number 4674 must be ordered for each 3592 Model J1A Tape Drive that will be installed in that frame. As noted above, the enhanced PCI Library Manager feature (#5046) may be required on the 3494 Model Lxx to support the 3592 Model J1A Tape Drive. http://www.ibm.com/eServer/iseries/support zSeries or S/390 Support under z/OS, OS/390, z/VM, and VSE/ESA operating system environments is available through the 3592 Model J70 Controller or the 3590 Model A60 Controller. Refer to Hardware Announcement 103-236, dated September 9, 2003 or Hardware Announcement 103-237, dated September 9, 2003. pSeries and RS/6000 Software requirements: The 3494 with the 3592 Model J1A Tape Drive is supported on selected servers with OS/400 , AIX , HP-UX, Linux, Sun, and Windows NT , Windows 2000, or Windows Server 2003. Support for the z/OS , OS/390 , z/VM , and VSE/ESA operating system environments is available through the 3592 Model J70 Controller or 3590 Model A60 Controller. Device drivers are provided with 3494 specify feature number 9200 (Open System Device Drivers). Support for the 3592 Model J1A is provided in: The installation of a 3592 Tape Drive may require code updates for S/390, AS/400, and supported open systems device drivers or storage management software. Per the Solutions Assurance Product Review (SAPR) Guide, the account team or Business Partner should ensure that the customer checks the appropriate PSP buckets for S/390 or zSeries environments for the equivalent support levels required for their particular software environment prior to the installation of the 3592 Model J1A. A Solutions Assurance call is required at a minimum for the installation of the first new 3592 model in an account. • AIX V4.3.3, and later • AIX 5L V5.1, and later, for Power-based servers Device support of the 3592 Model J1A is also provided on pSeries servers with the following Linux distribution: • SuSE Linux Enterprise Server 8.0 Sun Device drivers are provided with 3494 specify feature number 9200 (Open System Device Drivers). Support for the 3592 Model J1A under Sun systems is provided in: For the most recent information on supported software versions and release levels for the 3592, as well as hardware support information, refer to the following Web site: • Solaris 7, 8, or 9 HP Systems http://www.storage.ibm.com/tape/drives/ 3592/3592opn.pdf Device drivers are provided with 3494 specify feature number 9200 (Open System Device Drivers). Open Systems Device Drivers Support under HP systems is provided in: The Open Systems Device Drivers feature (#9200) includes tape library and tape device drivers and documentation for attachment of tape drives in the 3494 to supported open systems environments. An update of the open systems device drivers should be obtained to ensure support for the attachment of the 3592 Model J1A to various servers. New 3494 customers should order feature number 9200 (Open System Device Drivers). Installed customers with feature number 9200 may download these new device drivers via anonymous FTP from: • HP-UX 11.0 and 11.i (64-bit, PCI) Linux Device support of the 3592 Model J1A is provided on 32-bit Intel based servers with the following Linux distributions: • Red Hat Enterprise Linux • United Linux distributions: 1.0, which includes the following − SuSE Linux Enterprise Server 8 (SLES 8) Look under the directory storage/devdrvr. − Turbolinux Enterprise Server 8 (TLES 8) Further information can be found in the IBM TotalStorage Tape Device Driver Installation and User ′ s Guide (GC35-0154), also available at the above FTP site. − Conectiva Linux Enterprise Edition Powered by United Linux ftp://ftp.software.ibm.com/storage/devdrvr Device support of the 3592 Model J1A is provided on zSeries servers with the following Linux distribution: Minimum levels of software support • Software support for the 3592 Model J1A Tape Drive in the 3494 is provided by the minimum levels of the software listed below: 103-239 -4- SuSE Linux Enterprise Server 8.0 Direct customer support: Eligible customers can obtain installation and usage assistance through ASK Support using the search word 3494. Microsoft Windows Device drivers are provided with 3494 specify feature number 9200 (Open System Device Drivers). Support under Windows is provided in: • Microsoft Windows NT V4.0 (with Service Pack 6A, or later) • Microsoft Windows 2000 (build 2195, or greater) • Microsoft Windows Server 2003 (build 3790, or greater) Supplies: For end users and remarketers: IBM data media supplies can be ordered directly through AAS using feature numbers on the Enterprise Tape Library 3494 Frames. These features provide unlabeled data cartridges. Labeled, initialized, or bulk IBM 3592 Model J1A data media can be ordered directly through AAS using machine type 3599. Refer to the 3599 Sales Manual. IBM data media supplies are also available through media distributors. Application software Tivoli Storage Manager and other industry-leading compatible software offerings provide storage and tape management software for the 3494 and tape drives in the 3494. Supporting software and applications must be obtained separately from IBM, IBM Business Partners, or independent software vendors (ISV). For a list of compatible software and additional information, refer to the ISV Compatibility Matrix for the 3592 Model J1A Tape Drive and the 3494 at the following Web site: For information about IBM branded media call 888-IBM-MEDIA (426-6334) in the U.S. and Canada or refer to: http://www.storage.ibm.com/media The part numbers for additional supplies are: IBM part number http://www.storage.ibm.com/tape/conntrix/ Compatibility: The 3592 Model J1A tape drives cannot read cartridges written by the 3590 or 3490. Cartridges written by the 3592 Model J1A cannot be read by the 3590 or 3490. Even though the cartridges are similar in size, they contain different media, and thus are not interchangeable. 18P7534 18P7535 Supply item IBM TotalStorage Enterprise Tape Cartridge 3592 (Data) IBM TotalStorage Enterprise Tape Cartridge 3592 (Cleaning) Note: The Enterprise Tape Cartridge 3592 has servo tracks written on it. These tracks enable the 3592 Model J1A tape drive to accurately position the read/write head with respect to the media while the tape is in motion. If these servo tracks are damaged or removed (such as by Degausing), the cartridge is no longer useable. Limitations: Configurations of 1 to 16 frames are allowed when the 3494 configuration does not contain a Model HA1. When Model HA1 Frames are attached, configurations of 3, 4, 6, 8, 10, 12, and 16 frames are allowed (not counting the two service bay frames). If more than eight frames are attached to a 3494, one Tape Drive Expansion Frame (Model D10, D12, D22, D14, or D24 or feature number 5300, 5302, or 5304) must be located in the first eight frames. There must be a minimum of four frames if the Dual Active Accessor (DAA) feature is installed. Security, auditability, and control This product uses the security and auditability features of host hardware, host software, and/or application software to which it is attached. With Multiframe Support, all the 3592 Tape Drives in the Model L22 must be attached to a 3592 Model J70 or 3590 Model A60 Controller in an adjacent Model D24 frame. The customer is responsible for evaluation, selection, and implementation of security features, administrative procedures, and appropriate controls in application systems and communications facilities. Planning information Customer responsibilities: Physical planning is a customer responsibility. Current levels of the open systems device drivers should be obtained to ensure the 3592 Model J1A is supported. The 3590 Model A60 Controller and Enterprise Tape Library 3494 may require subsystem microcode updates by the IBM service representative for the proper installation and operation of the attached 3592 Model J1A Tape Drive. Inform your IBM representative to refer to 3494 and 3592 Model J1A maintenance information for information on these requirements so they may be incorporated into your installation planning. Detailed physical planning information is in the IBM TotalStorage Enterprise Automated Tape Library Introduction and Planning Guide (GA32-0448). Terms and conditions This product is available for purchase under the terms of the IBM Customer Agreement (ICA). IBM hardware products are manufactured from new parts, or new and used parts. In some cases, the hardware product may have been previously installed. Regardless, IBM warranty terms apply. Volume orders: Contact your IBM representative. IBM Global Financing: Yes Warranty period: One year Cable orders: Appropriate Fibre Channel cable(s) should be ordered for each tape drive or controller. Refer to the Fibre Channel Cables section of the Special Feature Numbers in the 3592 Model J1A Sales Manual for Fibre Channel cable information. Warranty service: If required, IBM provides repair or exchange service depending on the type of warranty service specified for your machine below. An IBM technician will attempt to resolve your problem over the telephone; you must follow IBM′s problem determination and resolution procedures. Scheduling of service will depend upon the time of your call and is subject to parts -5- 103-239 availability. Service levels are response time objectives and are not guaranteed. The specified level of warranty service may not be available in all worldwide locations. Additional charges may apply outside IBM′s normal service area, contact your local IBM representative or your reseller for country and location specific information. On-site Service — IOR, 24 hours per day, 7 days a week, same-day response. IBM will repair the failing machine at your location and verify its operation. You must provide suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose. On-site Service — IBM On-site Repair (IOR), 24 hours per day, 7 days a week, same-day response. IBM will repair the failing machine at your location and verify its operation. You must provide suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose. Usage plan machine: No ServiceSuite and ServiceElect (formerly ESA) maintenance: For ServiceElect (Z125-5510) and ServiceSuite (Z125-5745) Statements of Work Field-installable features: Yes If required, IBM provides repair or exchange service upgrades depending on the type of service specified for your machine below. An IBM technician will attempt to resolve your problem over the telephone; you must follow IBM′s problem determination and resolution procedures. Scheduling of service will depend upon the time of your call and is subject to parts availability. Service levels are response time objectives and are not guaranteed. The specified level of service may not be available in all worldwide locations. Additional charges may apply outside IBM′s normal service area, contact your local IBM representative or your reseller for country and location specific information. Machine installation: Installation is performed by IBM. IBM will install the machine in accordance with the IBM installation procedures for the machine. In the United States, contact IBM at 800-IBM-SERV (426-7878), in other countries contact the local IBM office. IBM hourly service rate classification: Two When a type of service involves the exchange of a machine part, the replacement may not be new, but will be in good working order. Model conversions: Yes Detailed physical planning information is in the IBM TotalStorage Enterprise Automated Tape Library Introduction and Planning Guide (GA32-0448). Customer requests for installation of items not covered in this guide may be performed at IBM′s hourly service rate designated for the machine. On-site Service — IOR, 24 hours per day, 7 days a week, same-day response. IBM will repair the failing machine at your location and verify its operation. You must provide suitable working area to allow disassembly and reassembly of the IBM machine. The area must be clean, well lit, and suitable for the purpose. Graduated charges: No Licensed internal code: IBM Licensed Internal Code (LIC) is licensed for use by a customer on a Specific Machine, designated by serial number, under the terms and conditions of the IBM Agreement for Licensed Internal Code, to enable a specific machine to function in accordance with its Specifications, and only for the capacity authorized by IBM and for which the customer has paid. Maintenance service: The preferred go-to-market offerings are ServiceElect and ServiceSuite. However, ICA legacy contracts will still be available for current customers until they are withdrawn. Educational allowance: A reduced charge is available to qualified education customers. The educational allowance may not be added to any other discount or allowance. If required, IBM provides repair or exchange service upgrades depending on the type of service specified for your machine below. An IBM technician will attempt to resolve your problem over the telephone; you must follow IBM′s problem determination and resolution procedures. Scheduling of service will depend upon the time of your call and is subject to parts availability. Service levels are response time objectives and are not guaranteed. The specified level of service may not be available in all worldwide locations. Additional charges may apply outside IBM′s normal service area, contact your local IBM representative or your reseller for country and location specific information. Prices Product charges Description Tape Library Base Frame Remote Support Facility 103-239 Machine type Model 3494 L22 Feature number 27101 -6- Purchase price MMC $ 86,900 $737 0 NC Field install only Plant install only N N Description Remote Support Switch Remote Support Attachment English Nomenclature French Nomenclature Japanese Nomenclature Spanish Nomenclature Italian Nomenclature French Canadian Nomenclature Adjacent Frame 3592 — SC Adjacent Frame 3592 — LC Field Install J1A Drive Remove J1A from 3494 Install Cradle Pair Remove Cradle Pair Reinstall Cradle Pair PCI Library Manager — Field Dual Active Accessor Input/Output Station Dual Gripper Remote Power RS-232 Cable 50 ft Token Ring LAN Adaptor Ethernet LAN Adaptor Remote Console 32 Port Attachment Tape Control Unit Expansion Tape Control Unit Attachment 30 Cartridge I/O Station Attachment Concentrator Dual Path Concentrator Upgrade 5300 to 5302 Upgrade 5300 to 5304 Additional Storage Unit Drive Unit For B18 Machine type Model Field install only Plant install only NC N N 0 NC N N 29241 NC NC N Y 29281 NC NC N Y 29301 NC NC N Y 29311 NC NC N Y 29321 NC NC N Y 29351 NC NC N Y 4065 3,000 NC N N 4075 3,000 NC N N 4674 700 NC Y N 4772 350 NC Y N 4800 6,000 NC N N 4801 1,400 NC Y N 4803 3,500 NC Y N 50461 17,000 NC Y N 50501 25,000 NC N N 52101 3,630 NC N N 52151 52161 52171 10,000 1,600 275 $ 18 NC NC N N N N N N 52191 2,250 NC N N 52201 2,250 NC N N 52261 52271 1,000 12,000 NC NC N N N N 52281 2,000 NC N N 52291 6,000 NC N N 52301 8,710 NC N N 52321 3,750 NC N N 52461 25,000 NC N N 53021 3,500 31 Y N 53041 3,500 31 Y N 55001 0 31 Y N 55021 0 31 Y N Feature number Purchase price MMC 2,450 27111 27121 $ -7- 103-239 Description Machine type Model SCSI Drive Unit ESCON Drive Unit 3592 Cleaning Cartridge 20-3592 Data Cartridges Storage Unit Attach Drive Unit Attach Storage Unit Attach Greater Than 8 Frames Drive Unit Attach 8 Frames Virtual Tape Server Attachment VTS Attach Greater Than 8 Frames Additional Drives Support B20, B10, B18 VTS Attachment Virtual Drives Enhancement High Availability Attachment PCI Library Manager — Plant Attach Ctlr to 3494 Conc Attach Ctlr to 3494 RS422 AS/400, iSeries Attachment RS/6000, pSeries Attachment S/390, zSeries Attachment Open System Device Drivers HP-UX Attachment Sun Attachment Windows Attachment Other Linux Attachment zSeries Linux Attachment No Data Cartridges Factory Install J1A Drive Field Merge J1A Drive 103-239 Plant install only $ 3,500 $ 31 Y N 3,500 31 Y N 8802 140 NC N N 8820 4,400 NC N Y 90021 0 NC N N 90031 0 NC N N 90041 0 NC N N 90051 0 NC N N 90061 0 NC N N 90071 0 NC N N 90111 0 NC N N 90201 0 NC N N 90211 0 NC N N 90401 90401 0 0 NC NC N N N N 90461 0 NC N Y 90601 0 NC N N 90611 0 NC N N 91042 0 NC N N 91062 0 NC N N 91092 0 NC N N 92001 0 NC N N 92101 92111 92122 0 0 0 NC NC NC N N N N N N 9215 0 NC N N 9216 0 NC N N 95401 0 NC N Y 9673 0 NC N Y 9674 0 NC N Y NC NC N N 35,000 58 Purchase price 55031 55041 99861 6-Foot Chicago Power Cord Tape Drive Expansion Frame MMC Field install only Feature number 3494 D22 -8- Description Machine type Model Adjacent Frame 3592 — SC Adjacent Frame 3592 — LC Field Install J1A Drive Remove J1A from 3494 Install Cradle Pair Remove Cradle Pair Reinstall Cradle Pair 3592 Cleaning Cartridge 20-3592 Data Cartridges Drive Unit Attach 8 Frames High Availability Attachment AS/400, iSeries Attachment RS/6000, pSeries Attachment S/390, zSeries Attachment HP-UX Attachment Sun Attachment Windows Attachment Other Linux Attachment zSeries Linux Attachment No Data Cartridges Factory Install J1A Drive Factory Install J1A Drive Field Merge J1A Drive Plant install only NC N N 3,000 NC N N 4674 700 NC Y N 4772 350 NC Y N 4800 6,000 NC N N 4801 1,400 NC Y N 4803 3,500 NC Y N 8802 140 NC N N 8820 4,400 NC N Y 90051 0 NC N N 90401 0 NC N N 91042 0 NC N N 91062 0 NC N N 91092 0 NC N N 92101 92111 92122 9215 0 0 0 0 NC NC NC NC N N N N N N N N 9216 0 NC N N 95401 0 NC N Y 9673 0 NC N Y 9673 0 NC N Y 9674 0 NC N Y NC NC N N 35,000 $ 58 34642 3,000 20 N N 34742 3,000 20 N N 46601 1,500 NC Y N 46651 1,500 NC Y N 4674 700 NC Y N 47651 350 NC Y N 4772 350 NC Y N 4800 6,000 NC N N 4801 1,400 NC Y N Purchase price 4065 $ 3,000 4075 99861 6-Foot Chicago Power Cord Tape Drive Expansion Frame SC Fibre Drive Attach Ctlr LC Fibre Drive Attach Ctlr Replace A00/A50 with A60 Field Install A60 in 3494 Field Install J1A Drive Remove A60 from 3494 Remove J1A from 3494 Install Cradle Pair Remove Cradle Pair Field install only Feature number 3494 D24 -9- MMC 103-239 Description Machine type Model Reinstall Cradle Pair Field Install J70 in 3494 Replace Ctlr with J70 Remove J70 from 3494 3592 Cleaning Cartridge 20-3592 Data Cartridges Drive Unit Attach 8 Frames High Availability Attachment Attach Ctlr to 3494 Conc Attach Ctlr to 3494 RS422 S/390, zSeries Attachment No Data Cartridges Field Merge A60 in 3494 Plant Install A60 in 3494 Factory Install J1A Drive Field Merge J1A Drive Field Merge J70 in 3494 Plant Install J70 in 3494 Tape Library Base Frame Other Linux Attachment zSeries Linux Attachment 3494 Tape Drive Expansion Frame Other Linux Attachment zSeries Linux Attachment 3494 2 Plant install only NC Y N 1,500 NC N N 4860 1,500 NC N N 4865 350 NC N N 8802 140 NC N N 8820 4,400 NC N Y 90051 0 NC N N 90401 0 NC N N 90601 0 NC N N 90611 0 NC N N 91092 0 NC N N 95401 0 NC N Y 96651 0 NC N Y 96661 0 NC N Y 9673 0 NC N Y 9674 0 NC N Y 9865 0 NC N N 9866 0 NC N N NC NC N N 9215 0 NC N N 9216 0 NC N N 9215 0 NC N N 9216 0 NC N N Purchase price 4803 $ 3,500 4855 99861 6-Foot Chicago Power Cord 1 Field install only Feature number MMC L12 D12 These features have been announced previously on other models. These features have been announced previously but their description has changed. MMMC = Monthly Maintenance Charge NC = No Charge N = No Y = Yes Description Tape Library Base Frame Remote Support Facility 103-239 Machine type Model 3494 L22 Monthly rental charge Feature number MES removal MES removal charge Y NC $5,082 2710 0 -10- Description Remote Support Switch Remote Support Attachment English Nomenclature French Nomenclature Japanese Nomenclature Spanish Nomenclature Italian Nomenclature French Canadian Nomenclature Adjacent Frame 3592 — SC Adjacent Frame 3592 — LC Field Install J1A Drive Remove J1A from 3494 Install Cradle Pair Remove Cradle Pair Reinstall Cradle Pair PCI Library Manager — Field Dual Active Accessor Input/Output Station Dual Gripper Remote Power RS-232 Cable 50 ft Token Ring LAN Adaptor Ethernet LAN Adaptor Remote Console 32 Port Attachment Tape Control Unit Expansion Tape Control Unit Attachment 30 Cartridge I/O Station Attachment Concentrator Dual Path Concentrator Upgrade 5300 to 5302 Upgrade 5300 to 5304 Additional Storage Unit Drive Unit For B18 SCSI Drive Unit ESCON Drive Unit Machine type Model Feature number Monthly rental charge MES removal MES removal charge 2711 $ 123 Y NC 2712 0 Y NC 2924 0 Y NC 2928 0 Y NC 2930 0 Y NC 2931 0 Y NC 2932 0 Y NC 2935 0 Y NC 4065 150 Y NC 4075 150 Y NC 4674 0 Y NC 4772 0 Y NC 4800 0 Y NC 4801 0 Y NC 4803 0 Y NC 5046 850 Y NC 5050 1,250 Y NC 5210 182 Y NC 5215 5216 5217 515 80 14 Y Y Y NC NC NC 5219 113 Y NC 5220 113 Y NC 5226 5227 50 600 Y Y NC NC 5228 100 Y NC 5229 300 Y NC 5230 435 Y NC 5232 188 Y NC 5246 1,250 Y NC 5302 1,775 Y NC 5304 1,775 Y NC 5500 0 Y NC 5502 0 Y NC 5503 5504 204 204 Y Y NC NC -11- 103-239 Description Machine type Model 3592 Cleaning Cartridge 20-3592 Data Cartridges Storage Unit Attach Drive Unit Attach Storage Unit Attach >8 Frames Drive Unit Attach 8 Frames Virtual Tape Server Attachment VTS Attach >8 Frames Additional Drives Support B20, B10, B18 VTS Attachment Virtual Drives Enhancement High Availability Attachment PCI Library Manager — Plant Attach Ctlr to 3494 Conc Attach Ctlr to 3494 RS422 AS/400, iSeries Attachment RS/6000, pSeries Attachment S/390, zSeries Attachment Open System Device Drivers HP-UX Attachment Sun Attachment Windows Attachment Other Linux Attachment zSeries Linux Attachment No Data Cartridges Factory Install J1A Drive Field Merge J1A Drive 6-Foot Chicago Power Cord Tape Drive Expansion Frame Adjacent Frame 3592 — SC Adjacent Frame 3592 — LC 103-239 3494 Feature number Monthly rental charge MES removal MES removal charge 8802 $ 0 Y NC 8820 0 Y NC 9002 NC Y NC 9003 NC Y NC 9004 NC Y NC 9005 NC Y NC 9006 NC Y NC 9007 NC Y NC 9011 NC Y NC 9020 NC Y NC 9021 NC Y NC 9040 NC Y NC 9046 NC Y NC 9060 NC Y NC 9061 NC Y NC 9104 NC Y NC 9106 NC Y NC 9109 NC Y NC 9200 NC Y NC 9210 9211 9212 NC NC NC Y Y Y NC NC NC 9215 NC Y NC 9216 NC Y NC 9540 NC Y NC 9673 NC Y NC 9674 NC Y NC 9986 NC N NC D22 1,808 4065 150 Y NC 4075 150 Y NC -12- Description Machine type Model Field Install J1A Drive Remove J1A from 3494 Install Cradle Pair Remove Cradle Pair Reinstall Cradle Pair 3592 Cleaning Cartridge 20-3592 Data Cartridges Drive Unit Attach 8 Frames High Availability Attachment AS/400, iSeries Attachment RS/6000, pSeries Attachment S/390, zSeries Attachment HP-UX Attachment Sun Attachment Windows Attachment Other Linux Attachment zSeries Linux Attachment No Data Cartridges Factory Install J1A Drive Field Merge J1A Drive 6-Foot Chicago Power Cord Tape Drive Expansion Frame SC Fibre Drive Attach Ctlr LC Fibre Drive Attach Ctlr Replace A00/A50 with A60 Field Install A60 in 3494 Field Install J1A Drive Remove A60 from 3494 Remove J1A from 3494 Install Cradle Pair Remove Cradle Pair Reinstall Cradle Pair 3494 Feature number Monthly rental charge MES removal MES removal charge 4674 $ 0 Y NC 4772 0 Y NC 4800 0 Y NC 4801 0 Y NC 4803 0 Y NC 8802 0 Y NC 8820 0 Y NC 9005 NC Y NC 9040 NC Y NC 9104 NC Y NC 9106 NC Y NC 9109 NC Y NC 9210 NC Y NC 9211 9212 NC NC Y Y NC NC 9215 NC Y NC 9216 NC Y NC 9540 NC Y NC 9673 NC Y NC 9674 NC Y NC 9986 NC N NC D24 1,808 3464 168 Y NC 3474 168 Y NC 4660 0 Y NC 4665 0 Y NC 4674 0 Y NC 4765 0 Y NC 4772 0 Y NC 4800 0 Y NC 4801 0 Y NC 4803 0 Y NC -13- 103-239 Feature number Monthly rental charge MES removal MES removal charge Field Install J70 in 3494 Replace Ctlr with J70 Remove J70 from 3494 3592 Cleaning Cartridge 20-3592 Data Cartridges Drive Unit Attach 8 Frames High Availability Attachment Attach Ctlr to 3494 Conc Attach Ctlr to 3494 RS422 S/390, zSeries Attachment No Data Cartridges Field Merge A60 in 3494 Plant Install A60 in 3494 Factory Install J1A Drive Field Merge J1A Drive Field Merge J70 in 3494 Plant Install J70 in 3494 4855 $ 0 Y NC 4860 0 Y NC 4865 0 Y NC 8802 0 Y NC 8820 0 Y NC 9005 NC Y NC 9040 NC Y NC 9060 NC Y NC 9061 NC Y NC 9109 NC Y NC 9540 NC Y NC 9665 NC Y NC 9666 NC Y NC 9673 NC Y NC 9674 NC Y NC 9865 NC Y NC 9866 NC Y NC 6-Foot Chicago Power Cord 9986 NC N NC 9215 NC Y NC 9216 NC Y NC 9215 NC Y NC 9216 NC Y NC Description Machine type Tape Library Base Frame Other Linux Attachment zSeries Linux Attachment 3494 Tape Drive Expansion Frame Other Linux Attachment zSeries Linux Attachment 3494 Model L12 D12 For ServiceElect (ESA) Maintenance Service Charges, contact IBM Global Services at 888-IBM-4343 (426-4343). Model conversion purchase prices Model From To Model conversion purchase price L10 L12 L14 D10 D12 D14 D10 D12 $4,000 4,000 4,000 4,000 4,000 4,000 4,000 4,000 103-239 L22 L22 L22 D22 D22 D22 D24 D24 -14- Model From To Model Conversion Purchase Price D14 D22 D24 $4,000 4,000 4,000 D24 D24 D22 Specify feature codes: The following charges apply to features ordered for field installation: Description Storage Unit Attach Drive Unit Attach Storage Unit Attach Greater Than 8 Frames Drive Unit Attach 8 Frames Virtual Tape Server Attachment VTS Attach Greater Than 8 Frames Additional Drives Support B20, B10, B18 VTS Attachment Virtual Drives Enhancement High Availability Attachment Attach Ctlr to 3494 Conc Attach Ctlr to 3494 RS422 AS/400, iSeries Attachment RS/6000, pSeries Attachment S/390, zSeries Attachment Open System Device Drivers HP-UX Attachment Sun Attachment Windows Attachment Other Linux Attachment zSeries Linux Attachment Feature number Charge 9002 9003 9004 $0 0 0 9005 9006 9007 0 0 0 9011 9020 9021 9040 9060 9061 9104 9106 9109 9200 9210 9211 9212 9215 9216 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Global Financing: IBM Global Financing offers competitive financing to credit-qualified customers to assist them in acquiring IT solutions. Our offerings include financing for IT acquisition, including hardware, software, and services, both from IBM and other manufacturers or vendors. Offerings (for all customer segments: small, medium, and large enterprise), rates, terms, and availability can vary by country. Contact your local IBM Global Financing organization or visit the Web at: http://www.ibm.com/financing Order now To order, contact the Americas Call Centers, your local IBM representative, or your IBM Business Partner. To identify your local IBM representative or IBM Business Partner, call 800-IBM-4YOU (426-4968). Phone: Fax: Internet: Mail: 800-IBM-CALL (426-2255) 800-2IBM-FAX (242-6329) ibm — direct@vnet.ibm.com The Americas Call Centers Dept. YE001 P.O. Box 2690 Atlanta, GA 30301-2690 Reference: YE001 The Americas Call Centers, our national direct marketing organization, can add your name to the mailing list for catalogs of IBM products. Note: Shipments will begin after the planned availability date. Trademarks TotalStorage, iSeries, pSeries, FICON, VSE/ESA, eServer, and ServiceSuite are trademarks of International Business Machines Corporation in the United States or other countries or both. AS/400, RS/6000, zSeries, S/390, ESCON, OS/400, AIX, OS/390, z/OS, z/VM, and Tivoli are registered trademarks of International Business Machines Corporation in the United States or other countries or both. Intel is a registered trademark of Intel Corporation. Microsoft is a trademark of Microsoft Corporation. Windows and Windows NT are registered trademarks of Microsoft Corporation. Other company, product, and service names may be trademarks or service marks of others. -15- 103-239
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.1 Linearized : No Page Count : 18 Create Date : 2003:08:28 10:06:59 Producer : Acrobat Distiller Command 3.02b for AIX 4.1.1 and later (RS6000) Author : SCHOLL Creator : SCHOLL at RALVM8 Title : C4334EXIF Metadata provided by EXIF.tools