ES9000_Data_Sheet_ ES9000_Data_Sheet ES9000 Data Sheet
User Manual: ES9000_Data_Sheet
Open the PDF directly: View PDF 
.
Page Count: 2
| Download | |
| Open PDF In Browser | View PDF |
ES9000 Series Pre-Load Strike General Description The ES9000 has been designed to suit the harshest commercial environments, and has the unique feature of the ability to operate with up to 25kg of pre-load pressure on the keeper. Pre-load is a common condition that caused by pulling on a door before it unlocks, the weight of warped or drooping doors, seals on fire doors, or by differential air pressure created when heating and cooling systems are in use. Standard features include multi voltage 10 - 30Vdc and field changeable settings from fail safe tofail secure. Built to last, this is a premium locking solution that has been tested in excess of 2 million cycles and boasts unique features like no other available on the market today. Key Features • Operates under pre load up to 25kg • Easy field selectable fail safe/fail secure • Multi voltage 10-30Vdc • 1300kg holding force • 2.5 million cycles endurance rating • Latch keeper is significantly quieter in operation • Weather resistant (IP54) • Built in protection diode • Mounting tabs as standard • Non handed • 5 Year Warranty Applications • High traffic areas Standards and Compliance S3 (Security) Australian Lock Standard (AS4145.2.1993) D3 (Durability) Australian Lock Standard (AS4145.2.1993) CE Approved • Doors subjected to side load (pre load) • Fire rated door sets (Australian Specific) • Open in/open out doors • Suitable for use with all access control systems Trimec®, School Street, Willenhall, West Midlands WV13 3PW United Kingdom Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 Email: info@trimec-online.co.uk Web: www.trimec.com.au July 2011 © Trimec. All dimensions are nominal and subject to tolerances. ES9000 Series Pre-Load Strike 24.5mm 26.5mm 24.5mm 24.5mm 15.5mm ES9000 with 25mm Extension Lip 28.5mm 176mm 122mm 122mm 28.5mm 176mm 26.5mm 122mm 28.5mm 176mm 26.5mm 15.5mm ES900 with 50mm Extension Lip 15.5mm ES9000 with 75mm Extension Lip Specification Statement The electric strike should be fully monitored and have independent door / latch and solenoid monitor switches. Holding force for the strike should be not less than 1300kg. ES9000 Pre-Load Strike Technical Information Voltage 10 – 30Vdc Current 250mA @12Vdc – 130mA @24Vdc Solenoids Solenoid rated for continuous use. Electrical protection Polarity and back EMF protected Monitoring Solenoid Monitor - 1 amp NO/NC microswitch Door / Latch - 1 amp NO/NC microswitch Holding Force 1300kg static strength rating Endurance 1,200,000 cycles endurance rating @ 25kg pre-load 2,500,000 cycles general durability without pre-load conditions Latching Suitable for 15mm latch with 3mm door gap Environment Operational temperature range -20°C to +60°C Body Solid Stainless Steel Construction Keeper Stainless Steel Where Power to Lock and Power to Open functions may be required in the same building, a single electric strike should be interchangeable from either fail safe or fail secure from the rear of the strike. The electric strike should not consume current greater than 250mA @ 12Vdc and have a solenoid rated for continuous use. A fire rating not less than 4 hours is required where applicable. The strike must be capable of operating with up to 25kg of pre-load pressure applied to the keeper, be tested to 2.5 million operations and carry a minimum warranty of 5 years. Ordering Information SKU Short Code Description 119001-000 TRIMEC ES9000 PTO/PTL P/Load 0-30V PTO/PTL 119001-010 TRIMEC ES9000 PTO/PTL - NO LIP P/Load 0-30V PTO/PTL no lip 119001-020 TRIMEC ES9000 PTO/PTL - 8MM EXT LIP P/Load 0-30V PTO/PTL 8mm ext lip 119001-060 TRIMEC ES9000 PTO/PTL - EXT LIP HOLES P/Load 0-30V PTO/PTL lip extension holes Extension Lips 220200-505 TRIMEC ES2100 25MM Extension lip 220200-506 TRIMEC ES2100 50MM Extension lip Trimec®, School Street, Willenhall, West Midlands WV13 3PW United Kingdom Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837 Fax: +44(0) 845 873 4839 Email: info@trimec-online.co.uk Web: www.trimec.com.au July 2011 © Trimec. All dimensions are nominal and subject to tolerances.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-21:37:19 Format : application/postscript Creator : Stuart Thomas Title : ES9000_Data_Sheet_Layout 1 Creator Tool : Adobe Illustrator CS2 Create Date : 2011:07:06 11:29:41+01:00 Modify Date : 2011:07:06 11:29:41+01:00 Metadata Date : 2010:01:28 17:32:09Z Thumbnail Width : 256 Thumbnail Height : 88 Thumbnail Format : JPEG Thumbnail Image : (Binary data 8065 bytes, use -b option to extract) Document ID : uuid:5DFFE46D0D0311DF816E84EAEB5425C5 Instance ID : uuid:c3e39ad2-57e9-134c-83ac-aab6d45d5796 Producer : Acrobat Distiller 9.0.0 (Macintosh) Page Count : 2 Author : Stuart ThomasEXIF Metadata provided by EXIF.tools