ES9000_Data_Sheet_ ES9000_Data_Sheet ES9000 Data Sheet

User Manual: ES9000_Data_Sheet

Open the PDF directly: View PDF .
Page Count: 2

ES9000 Series Pre-Load Strike

Trimec®, School Street, Willenhall, West Midlands WV13 3PW United Kingdom

Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837

Fax: +44(0) 845 873 4839 Email: info@trimec-online.co.uk Web: www.trimec.com.au

July 2011 © Trimec.

All dimensions are nominal

and subject to tolerances.

General Description

The ES9000 has been designed to suit the

harshest commercial environments, and has the

unique feature of the ability to operate with up

to 25kg of pre-load pressure on the keeper.

Pre-load is a common condition that caused by

pulling on a door before it unlocks, the weight of

warped or drooping doors, seals on fire doors, or

by differential air pressure created when heating

and cooling systems are in use.

Standard features include multi voltage

10 - 30Vdc and field changeable settings

from fail safe tofail secure.

Built to last, this is a premium locking solution

that has been tested in excess of 2 million cycles

and boasts unique features like no other

available on the market today.

Key Features

•Operates under pre load up to 25kg

•Easy field selectable fail safe/fail secure

•Multi voltage 10-30Vdc

•1300kg holding force

•2.5 million cycles endurance rating

•Latch keeper is significantly quieter in

operation

•Weather resistant (IP54)

•Built in protection diode

•Mounting tabs as standard

•Non handed

•5 Year Warranty

Applications

•High traffic areas

•Doors subjected to side load (pre load)

•Fire rated door sets (Australian Specific)

•Open in/open out doors

•Suitable for use with all access control systems

Standards and Compliance

(Security) Australian Lock Standard (AS4145.2.1993)

(Durability) Australian Lock Standard

(AS4145.2.1993)

CE Approved

S3

D3

Trimec®, School Street, Willenhall, West Midlands WV13 3PW United Kingdom

Customer Support: Sales: +44(0) 845 873 4838 Tech: +44(0) 845 873 4837

Fax: +44(0) 845 873 4839 Email: info@trimec-online.co.uk Web: www.trimec.com.au

July 2011 © Trimec.

All dimensions are nominal

and subject to tolerances.

ES9000 Series Pre-Load Strike

Specification Statement

The electric strike should be fully monitored

and have independent door / latch and

solenoid monitor switches. Holding force for

the strike should be not less than 1300kg.

Where Power to Lock and Power to Open

functions may be required in the same

building, a single electric strike should be

interchangeable from either fail safe or fail

secure from the rear of the strike.

The electric strike should not consume current

greater than 250mA @ 12Vdc and have a

solenoid rated for continuous use. A fire rating

not less than 4 hours is required where

applicable. The strike must be capable of

operating with up to 25kg of pre-load

pressure applied to the keeper, be tested to

2.5 million operations and carry a minimum

warranty of 5 years.

ES9000 with 25mm Extension Lip ES900 with 50mm Extension Lip ES9000 with 75mm Extension Lip

122mm

24.5mm

28.5mm

26.5mm

176mm

122mm

26.5mm

24.5mm

28.5mm

176mm

122mm

26.5mm

24.5mm

28.5mm

176mm

15.5mm15.5mm15.5mm

ES9000 Pre-Load Strike Technical Information

Voltage

Current

Solenoids

Electrical protection

Monitoring

Holding Force

Endurance

Latching

Environment

Body

Keeper

10 – 30Vdc

250mA @12Vdc – 130mA @24Vdc

Solenoid rated for continuous use.

Polarity and back EMF protected

Solenoid Monitor - 1 amp NO/NC microswitch

Door / Latch - 1 amp NO/NC microswitch

1300kg static strength rating

1,200,000 cycles endurance rating @ 25kg pre-load

2,500,000 cycles general durability without pre-load conditions

Suitable for 15mm latch with 3mm door gap

Operational temperature range -20°C to +60°C

Solid Stainless Steel Construction

Stainless Steel

SKU Short Code Description

119001-000 TRIMEC ES9000 PTO/PTL P/Load 0-30V PTO/PTL

119001-010 TRIMEC ES9000 PTO/PTL - NO LIP P/Load 0-30V PTO/PTL no lip

119001-020 TRIMEC ES9000 PTO/PTL - 8MM EXT LIP P/Load 0-30V PTO/PTL 8mm ext lip

119001-060 TRIMEC ES9000 PTO/PTL - EXT LIP HOLES P/Load 0-30V PTO/PTL lip extension holes

Extension Lips

220200-505 TRIMEC ES2100 25MM Extension lip

220200-506 TRIMEC ES2100 50MM Extension lip

Ordering Information