EinScan SP操作指南 20170526最新版 2 Ein Scan SP Quick Guide Compressed

User Manual:

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

Preparation

Turntable
Assembly

Unpacking Checklist

①

②

④

Turntable
⑤

Scanner Bracket
⑦

⑧

STEP

01

04

Software Installation
Software Download

Connect the Scanner to a Computer

Download software and user

Plug USB cable into back of scanner and computer USB port.

Scanner Head
Assembly

①

ware-download

Calibration Board Holder

Place the scanner head
onto the bracket.

⑩
③

STEP

02

⑨

Run the Installer

⑧

Double click to run the

⑨

Power Adapter

Setting Scanner on
Tripod for Fixed
Scan mode.
Tripod

STEP

02

the installation instructions.

USB Cable A

⑩

USB Cable B

Download & Service

http://www.einscan.com/soft-

②

⑦

Power Cord

01

manual from

installation wizard and follow

Platinum Desktop 3D Scanner

STEP

Scanner Stand
⑥

Calibration Board

STEP

Scanner Assembly

Place the turntable onto scanner
stand

③

Scanner Head

Scanner Assembly

Reference Points

Screw the scanner into
the socket on the stand.

STEP

①

03

②

Screw the scanner head onto
tripod.

License Acquisition
During installation, you need
to obtain license file online
to activate your scanner.
Make sure the scanner has

Online Activation

⑩

Quick Guide

⑨

Connect the
Scanner to
Turntable
STEP

03

PC Requirement
Please prepare the PC with the following system
requirement .

Quick Start Guide
Getting Started with EinScan-SP

Operating System:�
Port:
RAM:
Graphic Card:
Graphic Memory:
CPU:

Win7 / 8 / 10 / 64bit
at least One USB2.0 / 3.0 port
> 16 G
NVDIA Series, GTX660 or better
>2G
i5 or higher

been connected well and
your computer is network-

⑧

ing so as to detect your
computer and validate your
license .

⑦

Plug USB cable into back
of scanner, and turntable.

STEP

05

Connect the Power Supply

If you fail to get license online, please contact your supplier or mail

Plug power cord into outlet and the back of scanner.

your scanner serial number ( Sticker on the back of the scanner head )
to einscan_support@shining3d.com to get the license file. Save the
license file to your desktop. Click “Local Activation” and browse the

STEP

06

Turn on the
Scanner
Press the touch switch
for 1 second to turn the
scanner on.

license file and “Import” .

Online Activation
Local Activation

Calibration

How to Get a
Successful Scan

STEP

Calibration Board
Assembly

01

What Can Be Scanned?

Our Scan Process
Build Project
Click “New Project” button
to start a new scan.

STEP

Edit Scan

01

onto the board holder.

Edit buttons:

SHIFT+Left mouse: Select
redundant data, the
selected section will show as
red. The tool bar on the top
will allow you to do further
edit.

Great to Scan Under
Auto Scan Mode

Insert calibration board

Our Scan Process

STEP

02

Calibration Board
Placement
Place the calibration board
on the center of the turntable

Choose texture scan if color
texture is needed for scanning.
Or, choose non-texture scan
(Texture scan is taking little
longer time, and white balance
test should be done before
texture scanning).

Difficult to Scan

Complete the
Scan in More
Directions

facing the scanner.

STEP

Transparent objects like glass
Shining or reflective objects like varnished metal
parts
Dark color object like black keyboard
Fuzzy objects like hair
Solution: Painting white powder on objects will improve
the scan quality.

Place Object

Calibration Tips

Moving objects
Hollow pattern object like Eiffel
Tower souvenirs
Objects smaller than 30*30*30 mm
(1.2*1.2*1.2 in)

Bright

Dark or
difficult
to scan

You should calibrate the scanner in the initial set-up, or IF YOU
MOVE THE SCANNER OR TURNTABLE.
When you find the scanned quality is not as good as initial set-up,
you can recalibrate your scanner.
Calibration needed when alignment mistake or failure frequently
appear during the scanning.

5 Show/Hide Stripes

Sometimes, if one rotate
can’t give you a full scan,
you can place the object
in other directions to
capture the missing faces.
After edit, save the
current scanned data, the
current data will
be aligned to the last scanned
data automatically.

Do NOT Suggest
to Scan

on-screen instructions to turn the calibration board in 3 directions.
NOTE: Rotate the calibration board only during calibration.

4 Undo

If automatic alignment fail
during scanning, you can use
manual alignment .
(Misalignment doesn't
frequently happen. Please refer
the detail of manual alignment
in user manual)

Make sure the object is
stable during the scanning.

Run the Calibration
to NEXT. Getting started with calibration button, following the

3 Delete

Manual
Alignment

03

Open software, choose your scanner model of EinScan-SP and go

2 Revert

Click to save data and exit the
single-piece edition.

Texture Scan Option
Objects larger than 30*30*30 mm (1.2*1.2*1.2 in)
Objects smaller than 250*250*250 mm (38*38*38 in)
Object weighing less than 5 kg (11 lbs)

1 Deselect

Note: If�the�size�and�weight�of�the�object�are out as
mentioned above, please scan on tripod without
turntable by Fixed Scan Mode.

Bright & Dark

Medium

Scan
Click Scan button to start
scanning.

Mesh

Adjust Brightness
Choose the brightness
setting according to your
object surface condition.
Too much red appears on
the object shown in the
window means over bright.
Note: Please check the
exposure instruction in user
manual.

When the scan is completed,
go mesh directly .
Watertight or Unwatertight
model can be selected due to
your request.

Watertight is closed model
which can be printed directly.
Unwatertight model is a
non-closed model keeping the
missing scanned area as it is,
which is usually chosen for
further design purpose in
other program.

HANGZHOU SHINING 3D TECH CO., LTD.
Email：sales@shining3d.com
Address：No.1398 Xiangbin Road, Wenyan Street,
Xiaoshan District, Hangzhou, China

Support Contact
Skype：einscan_support

Save
Asc, stl, obj and ply are
available.

Press the touch switch
for l second twice to
turn the scanner off.

WhatsApp：+86 13738029764
Email：einscan_support@shining3d.com

www.einscan.com

www.shining3d.com



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Create Date                     : 2017:05:26 18:40:09+09:00
Creator                         : Adobe Illustrator CC 2017 (Windows)
Creator Version                 : 21.0.0
Title                           : EinScan-SP操作指南-20170526最新版-2
Modify Date                     : 2018:12:11 23:35:11Z
Producer                        : 3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com)
Page Count                      : 2

EXIF Metadata provided by EXIF.tools