EndMill_6.0_gray 6237 End Mill Holder CAT2011 TC
User Manual: 6237
Open the PDF directly: View PDF 
.
Page Count: 20
| Download | |
| Open PDF In Browser | View PDF |
800-543-6237 www.lyndexnikken.com End Mill Holders End Mill Holders Scan these QR Codes Current Promotion Featured Video 9 End Mill Holders 800-543-6237 www.lyndexnikken.com End Mill Holders End Mill Holder Features Featuring the highest taper contact and high quality steel, our End Mill Holders provide extreme rigidity for even the heaviest machining applications. Shank style available from stock: CAT, BT, HSK, NMTB, and Straight, with inch or metric bores. High rigidity, stubby style, extended lengths and Aerospace whistle notch End Mill Holders also available. Aerospace End Mill Holders Lyndex-Nikken Aerospace End Mill Holders are field tested and proven to prevent the end mill from pullout, unlike other competitors' holders Unique Design and Built-in Features • End Mill Holder bore does not exceed 0.0002" beyond nominal dimension Aerospace End Mill Holder • Dual support screws to secure depth adjustment screw and side lock screw • Tapped fine 2B internal threads for precision adjustment • AT3 taper grind to match the grind tolerance of your machine spindle • Balanced for high-speed machining (up to 18,000RPM) • Made from high quality 4340 Nickel Chrome Molybdenum Heat Treated Japanese Steel 5 degree angle to prevent cutter pullout • End Mill Holder must be used with 5 degree whistle notch cutter (NAS 987) Our Aerospace End Mill Holders will help you produce aerospace parts with greater accuracy and efficiency. Large diameter depth adjustment screw for greater rigidity 10 800-543-6237 www.lyndexnikken.com End Mill Holders End Mill Holders CAT End Mill Holders • End mill inner bore T.I.R. < 0.0002 • Through-spindle coolant capability • AT3 or better taper • Available in high-speed balanceable versions TIR: < .0002 run out in ID bore Milling Speed: up to 20,000 rpm Tapping Please note that the maximum RPM listed in our catalog may vary depending on the toolholder shank, weight, balanceability and the G rating. Coolant-thru: jet slots (optional) ★★★★✩ ★✩✩✩✩ Set-up: quick and easy CAT 40 - Inch Style d L L1 L2 D D1 Set Screw Part Number C40S6-0125-1.38 Stubby 1/8” 1.38” 0.74” - 0.75” - S6-32X1/4 C4006-0125-2.36 Standard 1/8” 2.36” 0.63” - 0.75” - S6-32X1/4 C4016-0125-4.00 C40S6-0187-1.38 Standard Stubby 1/8” 3/16” 4.00” 1.38” 0.63” 0.94” - 0.75” 0.75” - S6-32X1/4 S8-32X1/4 C4006-0187-2.50 Standard 3/16” 2.50” 0.86” - 0.75” - S8-32X1/4 C4016-0187-4.00 C40S6-0250-1.38 Standard Stubby 3/16” 1/4” 4.00” 1.38” 0.86” 1.18” - 0.75” 0.79” - S8-32X1/4 S1/4-28X1/4 C4006-0250-2.50 Standard 1/4” 2.50” 1.10” - 0.79” - S1/4-28X1/4 d D Part Number C4016-0250-4.00 Standard 1/4” C4046-0250-9.00 Ext. Length 1/4” C40S6-0312-1.38 Stubby 5/16” 4.00” 9.00” 1.38” 1.10” 1.5” 1.34” 6.12” - 0.79” 0.79” 0.87” 1.75” - S1/4-28X1/4 S1/4-28X1/4 S5/16-24X1/4 C4006-0312-2.50 Standard 5/16” 2.50” 1.26” - 0.87” - S5/16-24X1/4 C4016-0312-4.00 C40S6-0375-1.38 Standard Stubby 5/16” 3/8” 4.00” 1.38” 1.26” 1.34” - 0.87” 1.00” - S5/16-24X1/4 S3/8-24X5/16 C4006-0375-2.50 Standard 3/8” 2.50” 1.26” - 1.00” - S3/8-24X5/16 C4016-0375-4.00 Standard 3/8” 4.00” 1.26” - 1.00” - S3/8-24X5/16 C4026-0375-5.00 Standard 3/8” C4046-0375-9.00 Ext. Length 3/8” C4006-0437-2.50 Standard 7/16” 5.00” 9.00” 2.50” 1.26” 1.5” 1.50” 6.12” - 1.00” 1.00” 1.38” 1.75” - S3/8-24X5/16 S3/8-24X5/16 S7/16-20X3/8 C4016-0437-4.00 C40S6-0500-1.75 Standard Stubby 7/16” 1/2” 4.00” 1.75” 1.50” 1.50” - 1.38” 1.38” - S7/16-20X3/8 S7/16-20X3/8 C4006-0500-2.50 Standard 1/2” 2.50” 1.50” - 1.38” - S7/16-20X3/8 C4016-0500-4.00 Standard 1/2” 4.00” 1.50” - 1.38” - S7/16-20X3/8 C4026-0500-5.00 Standard C4046-0500-9.00 Ext. Length C40S6-0625-1.75 Stubby 1/2” 1/2” 5/8” 5.00” 9.00” 1.75” 1.50” 1.5” 1.61” 6.12” - 1.38” 1.38” 1.65” 1.75” - S7/16-20X3/8 S7/16-20X3/8 S9/16-18X1/2 C4006-0625-3.00 Standard 5/8” 3.00” 1.61” - 1.65” - S9/16-18X1/2 C4016-0625-4.00 Standard 5/8” 4.00” 1.61” - 1.65” - S9/16-18X1/2 C4026-0625-5.50 Standard C4046-0625-9.00 Ext. Length C40S6-0750-1.75 Stubby 5/8” 5/8” 3/4” 5.50” 9.00” 1.75” 1.61” 1.5” 1.77” 6.12” - 1.65” 1.65” 1.89” 1.75” - S9/16-18X1/2 S9/16-18X1/2 S5/8-18X1/2 C4006-0750-3.00 Standard 3/4” 3.00” 1.77” - 1.75” - S5/8-18X1/2 C4016-0750-4.00 Standard 3/4” 4.00” 1.77” - 1.75” - S5/8-18X1/2 3/4” 3/4” 5.50” 9.00” 1.77” - - 1.75” 1.75” - S5/8-18X1/2 S5/8-18X1/2 C4026-0750-5.50 Standard C4046-0750-9.00 Ext. Length L L1 Stubby L L1 d D Standard D1 L2 L D Set Screws are included. Back-up screws not included. Extended length end mill holders can be modified to DIN standard. L1 d Extended Length Accessories: Set Screws Page 28 Set Screws for Aerospace Holders Page 28 Tool Jaw Page 212 Pull Stud Pages 139-140 11 End Mill Holders 800-543-6237 www.lyndexnikken.com End Mill Holders CAT End Mill Holders CAT 40 - Inch (cont.) d L L1 L2 D D1 Set Screw Part Number C40S6-0875-1.75 Stubby C4006-0875-3.50 Standard C4016-0875-6.00 Standard C4046-0875-9.00 Ext. Length 7/8” 7/8” 7/8” 7/8” 1.75” 3.50” 6.00” 9.00” 2.08” 2.08” 2.08” - - 1.94” 2.00” 2.00” 2.00” - S5/8-18X1/2 S5/8-18X1/2 (2) S5/8-18X1/2 (2) S5/8-18X1/2 (2) C40S6-1000-2.00 Stubby C4006-1000-4.00 Standard C4016-1000-6.00 Standard C4046-1000-9.00 Ext. Length 1” 1” 1” 1” 2.00” 4.00” 6.00” 9.00” 2.36” 2.36” 2.36” - - 2.25” 2.36” 2.36” 2.36” - S3/4-16X11/16 S3/4-16X11/16 (2) S3/4-16X11/16 (2) S3/4-16X11/16 (2) Part Number Style C40S6-1250-2.00 Stubby 1-1/4” 2.00” 2.28” - 2.25” - S3/4-16X7/16 C4006-1250-4.00 Standard 1-1/4” 4.00” 2.55” - 2.48” - S3/4-16X11/16 (2) C4016-1250-6.00 Standard 1-1/4” 6.00” 2.55” - 2.48” - S3/4-16X11/16 (2) C4006-1500-4.50 Standard 1-1/2” 4.50” 2.55” - 2.99” - S3/4-16X11/16 (2) C4016-1500-6.00 Standard 1-1/2” 6.00” 2.83” - 2.99” - S3/4-16X11/16 (2) L L1 d D Stubby Set Screws are included. Back-up screws not included. Extended length end mill holders can be modified to DIN standard. CAT 40 - Metric Style d L L1 D Set Screw Part Number C4006-6-2.50 Standard 6mm 2.50” 1.10” 0.78” S1/4-28X1/4 C4006-8-2.50 Standard 8mm 2.50” 1.25” 0.87” S5/16-24X1/4 C4006-10-2.50 Standard 10mm 2.50” 1.25” 1.00” S3/8-24X5/16 C4006-12-2.50 Standard 12mm 2.50” 1.50” 1.38” S7/16-20X3/8 C4006-14-3.00 Standard 14mm 3.00” 1.61” 1.65” S9/16-18X1/2 C4006-16-3.00 Standard 16mm 3.00” 1.61” 1.65” S9/16-18X1/2 C4006-18-3.00 Standard 18mm 3.00” 1.77” 1.75” S5/8-18x1/2 C4006-20-3.00 Standard 20mm 3.00” 1.77” 1.75” S5/8-18x1/2 C4006-25-4.00 Standard 25mm 4.00” 2.36” 2.36” S3/4-16X11/16 (2) C4006-32-4.00 Standard 32mm 4.00” 2.36” 2.48” S3/4-16X11/16 (2) Part Number L L1 d D Standard D1 Set Screws are included. Back-up screws not included. L2 L D L1 d Extended Length Accessories: Set Screws Page 28 12 Set Screws for Aerospace Holders Page 28 Tool Jaw Page 212 Pull Stud Pages 139-140 800-543-6237 www.lyndexnikken.com End Mill Holders End Mill Holders CAT End Mill Holders CAT 50 -Inch Style d L L1 L2 D D1 Set Screw Part Number C50S6-0250-1.38 Stubby 1/4” 1.38” 1.10” - 0.79” - S1/4-28X1/4 C5006-0250-2.50 Standard 1/4” 2.50” 1.10” - 0.79” - S1/4-28X1/4 C5016-0250-4.00 Standard 1/4” 4.00” 1.10” - 0.79” - S1/4-28X1/4 C5026-0250-6.00 Standard 1/4” 6.00” 1.10” - 0.79” - S1/4-28X1/4 C5036-0250-8.00 Ext. Length 1/4” C5006-0312-2.50 Standard 5/16” 8.00” 2.50” 1.5” 1.26” 4.76” - 0.79” 0.87” 1.62” - S1/4-28X1/4 S5/16-24X1/4 C5016-0312-4.00 Standard 5/16” 4.00” 1.26” - 0.87” - S5/16-24X1/4 C5026-0312-6.00 C50S6-0375-1.38 Standard Stubby 5/16” 3/8” 6.00” 1.38” 1.26” 1.26” - 0.87” 1.00” - S5/16-24X1/4 S3/8-24X5/16 C5006-0375-2.50 Standard 3/8” 2.50” 1.26” - 1.00” - S3/8-24X5/16 C5016-0375-4.00 Standard 3/8” 4.00” 1.26” - 1.00” - S3/8-24X5/16 C5026-0375-6.00 Standard 3/8” 6.00” 1.26” - 1.00” - S3/8-24X5/16 Part Number C5036-0375-8.00 Ext. Length 3/8” 8.00” 1.5” 5.12” 1.00” 2.75” S3/8-24X5/16 C5066-0375-15.00 Ext. Length 3/8” C5006-0437-2.50 Standard 7/16” 15.00” 2.50” 1.25” 1.50” 12.12” - 1.00” 1.38” 2.75” - S3/8-24X5/16 S7/16-20X3/8 C5016-0437-4.00 7/16” 4.00” 1.50” - 1.38” - S7/16-20X3/8 C5026-0437-6.00 Standard 7/16” C5036-0437-8.00 Ext. Length 7/16” C50S6-0500-1.75 Stubby 1/2” Standard 6.00” 8.00” 1.75” 1.53” 1.5” 1.50” 5.12” - 1.38” 1.38” 1.38” 2.75” - S7/16-20X3/8 S7/16-20X3/8 S7/16-20X3/8 C5006-0500-2.63 Standard 1/2” 2.63” 1.50” - 1.38” - S7/16-20X3/8 C5016-0500-4.00 Standard 1/2” 4.00” 1.50” - 1.38” - S7/16-20X3/8 C5026-0500-6.00 Standard 1/2” 6.00” 1.50” - 1.38” - S7/16-20X3/8 C5036-0500-8.00 Ext. Length 1/2” 8.00” 1.5” 5.12” 1.38” 2.75” S7/16-20X3/8 C5066-0500-15.00 Ext. Length C50S6-0625-1.75 Stubby 1/2” 5/8” 15.00” 1.75” 1.5” 1.61” 12.12” - 1.38” 1.65” 2.75” - S7/16-20X3/8 S9/16-18X1/2 C5006-0625-3.00 Standard 5/8” 3.00” 1.61” - 1.65” - S9/16-18X1/2 C5016-0625-4.00 Standard 5/8” 4.00” 1.61” - 1.65” - S9/16-18X1/2 C5026-0625-6.00 Standard 5/8” 6.00” 1.61” - 1.65” - S9/16-18X1/2 C5036-0625-8.00 Ext. Length 5/8” 8.00” 1.5” 5.12” 1.65” 2.75” S9/16-18X1/2 C5066-0625-15.00 Ext. Length C50S6-0750-1.75 Stubby 5/8” 3/4” 15.00” 1.75” 1.5” 1.77” 12.12” - 1.65” 1.89” 2.75” - S9/16-18X1/2 S5/8-18X1/2 C5006-0750-3.00 Standard 3/4” 3.00” 1.77” - 1.89” - S5/8-18X1/2 C5016-0750-4.00 Standard 3/4” 4.00” 1.77” - 1.89” - S5/8-18X1/2 C5026-0750-6.00 Standard L L1 d D Stubby L L1 d D Standard D1 L2 L 3/4” 6.00” 1.77” - 1.89” - S5/8-18X1/2 C5036-0750-8.00 Ext. Length 3/4” 8.00” 1.5” 5.12” 1.89” 2.75” S5/8-18X1/2 D C5066-0750-15.00 Ext. Length C50S6-0875-1.75 Stubby 3/4” 7/8” 15.00” 1.75” 1.76” 2.08” 11.86” - 1.89” 2.00” 2.75” - S5/8-18X1/2 S5/8-18X1/2 d C5006-0875-3.75 Standard 7/8” 3.75” 2.08” - 2.00” - S5/8-18X1/2 (2) C5016-0875-6.00 Standard 7/8” 6.00” 2.08” - 2.00” - S5/8-18X1/2 (2) 7/8” 1” 15.00” 2.00” 2.76” 2.36” 10.87” - 2.00” 2.36” 2.75” - S5/8-18X1/2 (2) S3/4-16X11/16 C5066-0875-15.00 Ext. Length C50S6-1000-2.00 Stubby C5006-1000-4.00 Standard 1” 4.00” 2.36” - 2.36” - S3/4-16X11/16 (2) C5016-1000-6.00 Standard 1” 6.00” 2.36” - 2.36” - S3/4-16X11/16 (2) C5026-1000-8.00 Ext. Length 1” 8.00” 2.76” 3.87” 2.36” 2.75” S3/4-16X11/16 (2) C5066-1000-15.00 Ext. Length 1” 15.00” 2.76” 10.87” 2.36” 2.75” S3/4-16X11/16 (2) L1 Extended Length Accessories: Set Screws Page 28 Set Screws for Aerospace Holders Page 28 Tool Jaw Page 212 Pull Stud Pages 139-140 13 End Mill Holders 800-543-6237 www.lyndexnikken.com End Mill Holders CAT End Mill Holders CAT 50 - Inch (cont.) Part Number Set Screw Part Number Style d L L1 L2 D D1 C50S6-1250-2.00 Stubby 1-1/4” 2.00” 2.55” - 2.75” - S3/4-16X11/16 C5006-1250-4.00 Standard 1-1/4” 4.00” 2.55” - 2.48” - S3/4-16X11/16 (2) C5016-1250-6.00 Standard - S3/4-16X11/16 (2) 1-1/4” 6.00” 2.55” - 2.48” C5026-1250-8.00 Ext. Length 1-1/4” 8.00” 2.76” 3.87” 2.48” 2.75” S3/4-16X11/16 (2) C5066-1250-15.00 Ext. Length 1-1/4” C50S6-1500-2.25 Stubby 1-1/2” 15.00” 2.25” 2.76” 2.83” 10.87” - 2.48” 2.75” 2.75” S3/4-16X11/16 (2) S3/4-16X11/16 C5006-1500-4.50 Standard 1-1/2” 4.50” 2.83” - 2.99” - S3/4-16X11/16 (2) C5016-1500-7.00 Standard 1-1/2” 7.00” 2.83” - 2.99” - S3/4-16X11/16 (2) C5026-1500-9.00 Standard 1-1/2” 9.00” 2.83” - 2.99” - S3/4-16X11/16 (2) C50S6-2000-3.63 Stubby 2” 3.63” 3.34” - 3.74” - S1”-14X7/8 (1) S1”-17X7/16 (1) C5026-2000-10.00 Standard 2” 10.00” 3.34” - 3.74” - S1”-14X7/8 (2) C5006-2000-5.37 Standard 2” 5.37” 3.34” - 3.74” - S1”-14X7/8 (2) C5016-2000-8.00 C5006-2500-6.00 Standard Standard 2” 2-1/2” 8.00” 6.00” 3.34” 3.66” - 3.74” 4.25” - S1”-14X7/8 (2) S1”-14X7/8 (2) L L1 d D Stubby Set Screws are included. Back-up screws not included. Extended length End Mill Holders can be modified to DIN standard. L CAT 50 - Metric Part Number Style C5006-6-2.50 Standard C5006-8-2.50 C5006-10-2.50 d L L1 D L1 Set Screw Part Number 6mm 2.50” 1.10” 0.79” S1/4-28X1/4 Standard 8mm 2.50” 1.10” 0.87” S5/16-24X1/4 Standard 10mm 2.50” 1.26” 1.00” S3/8-24X5/16 C5006-12-2.63 Standard 12mm 2.63” 1.50” 1.38” S7/16-20X3/8 C5006-14-3.00 Standard 14mm 3.00” 1.61” 1.65” S9/16-18X1/2 C5006-16-3.00 Standard 16mm 3.00” 1.61” 1.65” S9/16-18X1/2 C5006-18-3.00 Standard 18mm 3.00” 1.77” 1.89” S5/8-18X1/2 C5006-20-3.00 Standard 20mm 3.00” 1.77” 1.89” S5/8-18X1/2 C5006-25-4.00 Standard 25mm 4.00” 2.36” 2.36” S3/4-16X11/16 (2) C5006-32-4.00 Standard 32mm 4.00” 2.55” 2.48” S3/4-16X11/16 (2) C5006-40-4.50 Standard 40mm 4.50” 2.95” 3.07” S3/4-16X11/16 (2) C5006-42-4.50 Standard 42mm 4.50” 2.83” 3.07” S3/4-16X11/16 (2) C5006-50-5.37 Standard 50mm 5.37” 3.35” 3.74” S1”-14X7/8 (2) d D Standard D1 L2 L D Set Screws are included. Back-up screws not included. L1 d Extended Length Accessories: Set Screws Page 28 14 Set Screws for Aerospace Holders Page 28 Tool Jaw Page 212 Pull Stud Pages 139-140 800-543-6237 www.lyndexnikken.com End Mill Holders End Mill Holders CAT End Mill Holders - DIN CAT40 - DIN - Inch Style d L L1 D Set Screw Part Number C4006-0125-2.36DIN Standard 1/8” 2.36” 0.63” 0.75” S6-32X1/4 C4016-0125-4.00DIN C4006-0187-2.50DIN Standard Standard 1/8” 3/16” 4.00” 2.50” 0.63” 0.86” 0.75” 0.75” S6-32X1/4 S8-32X1/4 C4016-0187-4.00DIN C4006-0250-2.50DIN Standard Standard 3/16” 1/4” 4.00” 2.50” 0.86” 1.10” 0.75” 0.79” S8-32X1/4 S1/4-28X1/4 C4016-0250-4.00DIN C4006-0312-2.50DIN Standard Standard 1/4” 5/16” 4.00” 2.50” 1.10” 1.26” 0.79” 0.87” SS1/4-28X1/4 S5/16-24X1/4 C4016-0312-4.00DIN C4006-0375-2.50DIN Standard Standard 5/16” 3/8” 4.00” 2.50” 1.26” 1.26” 0.87” 1.00” S5/16-24X1/4 S3/8-24X5/16 C4016-0375-4.00DIN C4006-0437-2.50DIN Standard Standard 3/8” 7/16” 4.00” 2.50” 1.26” 1.50” 1.00” 1.38” S3/8-24X5/16 S7/16-20X3/8 C4016-0437-4.00DIN C4006-0500-2.50DIN Standard Standard 7/16” 1/2” 4.00” 2.50” 1.50” 1.50” 1.38” 1.38” S7/16-20X3/8 S7/16-20X3/8 C4016-0500-4.00DIN C4006-0625-3.00DIN Standard Standard 1/2” 5/8” 4.00” 3.00” 1.50” 1.61” 1.38” 1.65” S7/16-20X3/8 S9/16-18X1/2 C4016-0625-4.50DIN C4006-0750-3.00DIN Standard Standard 5/8” 3/4” 4.50” 3.00” 1.61” 1.77” 1.65” 1.75” S9/16-18X1/2 S5/8-18X1/2 C4016-0750-4.50DIN C4006-0875-3.50DIN Standard Standard 3/4” 7/8” 4.50” 3.50” 1.77” 2.08” 1.75” 2.00” S5/8-18X1/2 S5/8-18X1/2 (2) C4016-0875-5.00DIN C4006-1000-4.00DIN Standard Standard 7/8” 1” 5.00” 4.00” 2.08” 2.36” 2.00” 2.36” S5/8-18X1/2 (2) S3/4-16X11/16 (2) C4016-1000-5.50DIN C4006-1250-4.00DIN Standard Standard 1” 1-1/4” 5.50” 4.00” 2.36” 2.55” 2.36” 2.48” S3/4-16X11/16 (2) S3/4-16X11/16 (2) C4016-1250-5.50DIN C4006-1500-4.50DIN Standard Standard 1-1/4” 1-1/2” 5.50” 4.50” 2.55” 2.60” 2.48” 2.99” S3/4-16X11/16 (2) S3/4-16X11/16 (2) C4016-1500-6.00DIN Standard 1-1/2” 6.00” 2.60” 2.99” S3/4-16X11/16 (2) Part Number L L1 d D Set Screws are included. Back-up screws not included. “DIN” designates suitability for coolant through the flange per DIN 69871 Form B specs. CT40 - DIN - Metric Part Number Set Screw Part Number Style d L L1 D C4006-6-2.50DIN Standard 6mm 2.50” 1.10” 0.78” S1/4-28X1/4 C4006-8-2.50DIN Standard 8mm 2.50” 1.25” 0.87” S5/16-24X1/4 C4006-10-2.50DIN Standard 10mm 2.50” 1.25” 1.00” S3/8-24X5/16 C4006-12-2.50DIN Standard 12mm 2.50” 1.50” 1.38” S7/16-20X3/8 C4006-14-3.00DIN Standard 14mm 3.00” 1.61” 1.65” S9/16-18X1/2 C4006-16-3.00DIN Standard 16mm 3.00” 1.61” 1.65” S9/16-18X1/2 C4006-18-3.00DIN Standard 18mm 3.00” 1.77” 1.75” S5/8-18x1/2 C4006-20-3.00DIN Standard 20mm 3.00” 1.77” 1.75” S5/8-18x1/2 d C4006-25-4.00DIN Standard 25mm 4.00” 2.36” 2.36” S3/4-16X11/16 (2) C4006-32-4.00DIN Standard 32mm 4.00” 2.36” 2.48” S3/4-16X11/16 (2) D L L1 Set Screws are included. Back-up screws not included. “DIN” designates suitability for coolant through the flange per DIN 69871 Form B specs. Accessories: Set Screws Page 28 Set Screws for Aerospace Holders Page 28 Tool Jaw Page 212 Pull Stud Pages 139-140 15 End Mill Holders 800-543-6237 www.lyndexnikken.com End Mill Holders CAT End Mill Holders - DIN CAT50 - DIN - Inch Part Number L L1 Set Screw Part Number Style d D C5006-0250-2.50DIN Standard 1/4” 2.50” 1.10” 0.79” S1/4-28X1/4 C5016-0250-4.00DIN Standard 1/4” 4.00” 1.10” 0.79” S1/4-28X1/4 C5026-0250-6.00DIN C5006-0312-2.50DIN Standard Standard 1/4” 5/16” 6.00” 2.50” 1.10” 1.26” 0.79” 0.87” S1/4-28X1/4 S5/16-24X1/4 C5016-0312-4.00DIN Standard 5/16” 4.00” 1.30” 0.87” S5/16-24X1/4 C5026-0312-6.00DIN C5006-0375-2.50DIN Standard Standard 5/16” 3/8” 6.00” 2.50” 1.30” 1.26” 0.87” 1.00” S5/16-24X1/4 S3/8-24X5/16 C5016-0375-4.00DIN Standard 3/8” 4.00” 1.26” 1.00” S3/8-24X5/16 d C5026-0375-6.00DIN C5006-0437-2.50DIN Standard Standard 3/8” 7/16” 6.00” 2.50” 1.26” 1.50” 1.00” 1.38” S3/8-24X5/16 S7/16-20X3/8 D C5016-0437-4.00DIN Standard 7/16” 4.00” 1.50” 1.38” S7/16-20X3/8 C5026-0437-6.00DIN C5006-0500-2.63DIN Standard Standard 7/16” 1/2” 6.00” 2.63” 1.53” 1.50” 1.38” 1.38” S7/16-20X3/8 S7/16-20X3/8 C5016-0500-4.00DIN Standard 1/2” 4.00” 1.50” 1.38” S7/16-20X3/8 C5026-0500-6.00DIN C5006-0625-3.00DIN Standard Standard 1/2” 5/8” 6.00” 3.00” 1.50” 1.61” 1.38” 1.65” S7/16-20X3/8 S9/16-18X1/2 C5016-0625-4.00DIN Standard 5/8” 4.00” 1.61” 1.65” S9/16-18X1/2 C5026-0625-6.00DIN C5006-0750-3.00DIN Standard Standard 5/8” 3/4” 6.00” 3.00” 1.61” 1.77” 1.65” 1.89” S9/16-18X1/2 S5/8-18X1/2 C5016-0750-4.00DIN Standard 3/4” 4.00” 1.77” 1.89” S5/8-18X1/2 C5026-0750-6.00DIN C5006-0875-3.75DIN Standard Standard 3/4” 7/8” 6.00” 3.75” 1.77” 2.08” 1.89” 2.00” S5/8-18X1/2 S5/8-18X1/2 (2) C5016-0875-6.00DIN Standard 7/8” 6.00” 2.08” 2.00” S5/8-18X1/2 (2) C5026-0875-8.00DIN C5006-1000-4.00DIN Standard Standard 7/8” 1” 8.00” 4.00” 2.08” 2.36” 2.00” 2.36” S5/8-18X1/2 (2) S3/4-16X11/16 (2) C5016-1000-6.00DIN Standard 1” 6.00” 2.36” 2.36” S3/4-16X11/16 (2) C5026-1000-8.00DIN C5006-1250-4.00DIN Standard Standard 1” 1-1/4” 8.00” 4.00” 2.36” 2.55” 2.36” 2.48” S3/4-16X11/16 (2) S3/4-16X11/16 (2 C5016-1250-6.00DIN Standard 1-1/4” 6.00” 2.55” 2.48” S3/4-16X11/16 (2) C5026-1250-8.00DIN C5006-1500-4.50DIN Standard Standard 1-1/4” 1-1/2” 8.00” 4.50” 2.55” 2.75” 2.48” 2.99” S3/4-16X11/16 (2) S3/4-16X11/16 (2) C5016-1500-7.00DIN Standard 1-1/2” 7.00” 2.75” 2.99” S3/4-16X11/16 (2) C5026-1500-9.00DIN C5006-2000-5.37DIN C5006-2500-6.00DIN Standard Standard Standard 1-1/2” 2” 2-1/2” 9.00” 5.37” 6.00” 2.75” 3.34” 3.66” 2.99” 3.74” 4.25” S3/4-16X11/16 (2) S1”-14X7/8 (2) S1”-14X7/8 (2) L L1 Set Screws are included. Back-up screws not included. “DIN” designates suitability for coolant through the flange per DIN 69871 Form B specs. DIN extended length end mill holders are available. Please call us for more information. Accessories: Set Screws Page 28 16 Set Screws for Aerospace Holders Page 28 Tool Jaw Page 212 Pull Stud Pages 139-140 800-543-6237 www.lyndexnikken.com End Mill Holders End Mill Holders CAT End Mill Holders CAT50 - DIN - Metric Part Number Style d L L1 D Set Screw Part Number C5006-6-2.50DIN Standard 6mm 2.50” 1.10” 0.79” S1/4-28X1/4 C5006-8-2.50DIN Standard 8mm 2.50” 1.10” 0.87” S5/16-24X1/4 C5006-10-2.50DIN Standard 10mm 2.50” 1.26” 1.00” S3/8-24X5/16 C5006-12-2.63DIN Standard 12mm 2.63” 1.50” 1.38” S7/16-20X3/8 C5006-14-3.00DIN Standard 14mm 3.00” 1.61” 1.65” S9/16-18X1/2 C5006-16-3.00DIN Standard 16mm 3.00” 1.61” 1.65” S9/16-18X1/2 C5006-18-3.00DIN Standard 18mm 3.00” 1.77” 1.89” S5/8-18X1/2 C5006-20-3.00DIN Standard 20mm 3.00” 1.77” 1.89” S5/8-18X1/2 d C5006-25-4.00DIN Standard 25mm 4.00” 2.36” 2.36” S3/4-16X11/16 (2) D C5006-32-4.00DIN Standard 32mm 4.00” 2.55” 2.48” S3/4-16X11/16 (2) C5006-40-4.50DIN Standard 40mm 4.50” 2.76” 3.07” S3/4-16X11/16 (2) C5006-42-4.50DIN Standard 42mm 4.50” 2.76” 3.07” S3/4-16X11/16 (2) C5006-50-5.37DIN Standard 50mm 5.37” 3.35” 3.74” S1-14X7/8 (2) L L1 Set Screws are included. Back-up screws not included. “DIN” designates suitability for coolant through the flange per DIN 69871 Form B specs. CAT50 Aerospace Style d L L1 D Set Screw Part Number C5006-0375-2.82A Standard 3/8” 2.82” 1.52” 1.37” S3/8-24UNF C5016-0375-4.69A C5026-0375-6.69A C5006-0500-2.73A Standard Standard Standard 3/8” 3/8” 1/2” 4.69” 6.69” 2.73” 1.52” 1.52” 1.68” 1.37” 1.37” 1.63” S3/8-24UNF S3/8-24UNF S3/8-24UNF C5016-0500-4.60A Standard 1/2” 4.60” 1.68” 1.63” S3/8-24UNF C5026-0500-6.60A C5006-0625-2.66A Standard Standard 1/2” 5/8” 6.60” 2.66” 1.68” 1.74” 1.63” 1.81” S3/8-24UNF S1/2-20UNF C5016-0625-4.53A Standard 5/8” 4.53” 1.74” 1.81” S1/2-20UNF C5026-0625-6.53A C5006-0750-2.63A Standard Standard 5/8” 3/4” 6.53” 2.63” 1.74” 2.01” 1.81” 2.00” S1/2-20UNF S1/2-20UNF C5016-0750-4.50A Standard 3/4” 4.50” 2.01” 2.00” S1/2-20UNF C5026-0750-6.50A C5006-0875-2.63A Standard Standard 3/4” 7/8” 6.50” 2.63” 2.01” 2.01” 2.00” 2.25” S1/2-20UNF S1/2-20UNF C5016-0875-4.50A Standard 7/8” 4.50” 2.01” 2.25” S1/2-20UNF C5026-0875-6.50A C5006-1000-3.00A Standard Standard 7/8” 1” 6.50” 3.00” 2.01” 2.27” 2.25” 2.63” S1/2-20UNF S3/4-16x7/16 C5016-1000-4.50A Standard 1” 4.50” 2.27” 2.63” S3/4-16x7/16 C5026-1000-6.50A C5006-1250-3.00A Standard Standard 1” 1-1/4” 6.50” 3.00” 2.27” 2.27” 2.63” 2.87” S3/4-16x7/16 S3/4-16x7/16 C5016-1250-4.50A Standard 1-1/4” 4.50” 2.27” 2.87” S3/4-16x7/16 C5026-1250-6.50A C5006-1500-3.00A C5006-2000-5.35A Standard Standard Standard 1-1/4” 1-1/2” 2” 6.50” 3.00” 5.35” 2.27” 2.27” 3.38” 2.87” 3.25” 4.00” S3/4-16x7/16 S3/4-16x7/16 S3/4-16x7/16(2) C5016-2000-7.35A C5006-2500-5.35A Standard Standard 2” 2-1/2” 7.35” 5.35” 3.38” 3.38” 4.00” 5.00” S3/4-16x7/16(2) S3/4-16x7/16(2) C5016-2500-7.35A Standard 2-1/2” 7.35” 3.38” 5.00” S3/4-16x7/16(2) Part Number L L1 d D CAT50 Aerospace End Mill holders take back-up screws 3/4-16UNFx2-1/4. Aerospace End Mill Holders accept end mills with a 5° angled flat shank (per NAS 987). Side double locking screw only available in 1” and above. Set Screws are included. Back-up screws not included. Accessories: Set Screws Page 28 Set Screws for Aerospace Holders Page 28 Tool Jaw Page 212 Pull Stud Pages 139-140 17 End Mill Holders 800-543-6237 www.lyndexnikken.com End Mill Holders BT End Mill Holders • End mill inner bore T.I.R. < 0.0002 • Through-spindle coolant capability • AT3 or better taper • Available in high-speed balanceable versions TIR: < .0002 run out in ID bore Milling Speed: up to 20,000 rpm Tapping Please note that the maximum RPM listed in our catalog may vary depending on the toolholder shank, weight, balanceability and the G rating. Coolant-thru: jet slots (optional) ★★★★✩ ★✩✩✩✩ Set-up: quick and easy BT30 - Inch d L L1 D Set Screw Part Number Standard 1/8” 2.36” 0.63” 0.75” S6-32X1/4 Standard 3/16” 2.36” 0.87” 0.75” S8-32X1/4 B3006-0250-2.36 Standard 1/4” 2.36” 1.10” 0.79” S1/4-28X1/4 B3006-0312-2.36 Standard 5/16” 2.36” 1.26” 0.87” S5/16-24X1/4 B3006-0375-2.36 Standard 3/8” 2.36” 1.26” 1.00” S3/8-24X5/16 B3006-0437-2.36 Standard 7/16” 2.36” 1.50” 1.38” S7/16-20X3/8 B3006-0500-2.36 Standard 1/2” 2.36” 1.50” 1.38” S7/16-20X3/8 B3006-0625-2.50 Standard 5/8” 2.50” 1.61” 1.65” S9/16-18X1/2 B3006-0750-3.00 Standard 3/4” 3.00” 1.77” 1.88” S5/8-18X1/2 B3006-0875-3.54 Standard 7/8” 3.54” 2.09” 2.00” S5/8-18X1/2 (2) B3006-1000-3.54 Standard 1” 3.54” 2.36” 2.36” S3/4-16X11/16 (2) Set Screw Part Number Part Number Style B3006-0125-2.36 B3006-0187-2.36 L L1 d D Set Screws are included. Back-up screws not included. BT30 - Metric Part Number Style d L L1 D B3006-6-2.50 Standard 6mm 2.50” 1.10” 0.79” S1/4-28X1/4 B3006-8-2.50 Standard 8mm 2.50” 1.26” 0.87” S5/16-24X1/4 B3006-10-2.50 Standard 10mm 2.50” 1.26” 1.00” S3/8-24X5/16 B3006-12-2.50 Standard 12mm 2.50” 1.50” 1.38” S7/16-20X3/8 B3006-14-2.50 Standard 14mm 2.50” 1.61” 1.65” S9/16-18X1/2 B3006-16-2.50 Standard 16mm 2.50” 1.61” 1.65” S9/16-18X1/2 B3006-18-3.50 Standard 18mm 3.50” 1.65” 1.89” S5/8-18X1/2 B3006-20-3.50 Standard 20mm 3.50” 1.65” 1.89” S5/8-18X1/2 B3006-25-3.50 Standard 25mm 3.50” 2.36” 2.36” S3/4-16X11/16(2) Set Screws are included. Back-up screws not included. L L1 d D Accessories: Set Screws Page 28 18 Set Screws for Aerospace Holders Page 28 Tool Jaw Page 212 Pull Stud Pages 139-140 800-543-6237 www.lyndexnikken.com End Mill Holders End Mill Holders BT End Mill Holders BT40 - Inch Part Number Style d L L1 D Set Screw Part Number B40S6-0125-1.38 Stubby 1/8” 1.38” 0.78” 0.75” S6-32X1/4 B4006-0125-2.36 Standard 1/8” 2.36” 0.63” 0.75” S6-32X1/4 B4016-0125-4.00 Standard 1/8” 4.00” 0.63” 0.75” S6-32X1/4 B40S6-0187-1.38 Stubby 3/16” 1.38” 0.98” 0.75” S8-32X1/4 B4006-0187-2.50 Standard 3/16” 2.50” 0.86” 0.75” S8-32X1/4 B4016-0187-4.00 Standard 3/16” 4.00” 0.86” 0.75” S8-32X1/4 B40S6-0250-1.38 Stubby 1/4” 1.38” 1.18” 0.79” S1/4-28X1/4 d B4006-0250-2.50 Standard 1/4” 2.50” 1.10” 0.79” S1/4-28X1/4 D B4016-0250-4.00 Standard 1/4” 4.00” 1.10” 0.79” S1/4-28X1/4 B40S6-0312-1.38 Stubby 5/16” 1.38” 1.38” 0.87” S5/16-24X1/4 B4006-0312-2.50 Standard 5/16” 2.50” 1.26” 0.87” S5/16-24X1/4 B4016-0312-4.00 Standard 5/16” 4.00” 1.26” 0.87” S5/16-24X1/4 B40S6-0375-1.38 Stubby 3/8” 1.38” 1.38” 1.00” S3/8-24x5/16 B4006-0375-2.50 Standard 3/8” 2.50” 1.26” 1.00” S3/8-24x5/16 B4016-0375-4.00 Standard 3/8” 4.00” 1.26” 1.00” S3/8-24x5/16 B4006-0437-2.50 Standard 7/16” 2.50” 1.53” 1.38” S7/16-20X3/8 B40S6-0500-1.75 Stubby 1/2” 1.75” 1.57” 1.38” S7/16-20X3/8 B4006-0500-2.50 Standard 1/2” 2.50” 1.50” 1.38” S7/16-20X3/8 B4016-0500-4.00 Standard 1/2” 4.00” 1.57” 1.38” S7/16-20X3/8 B40S6-0625-1.75 Stubby 5/8” 1.75” 1.61” 1.65” S9/16-18X1/2 d B4006-0625-2.50 Standard 5/8” 2.50” 1.61” 1.65” S9/16-18X1/2 D B4016-0625-4.00 Standard 5/8” 4.00” 1.61” 1.65” S9/16-18X1/2 B40S6-0750-1.75 Stubby 3/4” 1.75” 1.77” 1.89” S5/8-18X1/2 B4006-0750-2.50 Standard 3/4” 2.50” 1.77” 1.89” S5/8-18X1/2 B4016-0750-4.00 Standard 3/4” 4.00” 1.77” 1.89” S5/8-18X1/2 B4006-0875-3.38 Standard 7/8” 3.38” 2.08” 2.00” S5/8-18X1/2(2) B4016-0875-6.00 Standard 7/8” 6.00” 2.08” 2.00” S5/8-18X1/2(2) B40S6-1000-2.00 Stubby 1” 2.00” 2.28” 2.25” S3/4-16X11/16 B4006-1000-3.56 Standard 1” 3.56” 2.36” 2.36” S3/4-16X11/16(2) B4016-1000-6.00 Standard 1” 6.00” 2.36” 2.36” S3/4-16X11/16(2) B40S6-1250-2.00 Stubby 1-1/4” 2.00” 2.16” 2.25” S3/4-16X11/16 B4006-1250-3.56 Standard 1-1/4” 3.56” 2.56” 2.48” S3/4-16X11/16(2) B4016-1250-6.00 Standard 1-1/4” 6.00” 2.56” 2.48” S3/4-16X11/16(2) B4006-1500-4.50 Standard 1-1/2” 4.50” 2.83” 2.99” S3/4-16X11/16(2) B4016-1500-6.00 Standard 1-1/2” 6.00” 2.83” 2.99” S3/4-16X11/16(2) L1 L Stubby L L1 Standard Set Screws are included. Back-up screws not included. Accessories: Set Screws Page 28 Set Screws for Aerospace Holders Page 28 Tool Jaw Page 212 Pull Stud Pages 139-140 19 End Mill Holders 800-543-6237 www.lyndexnikken.com End Mill Holders BT End Mill Holders BT40 - Metric Style d L L1 D Set Screw Part Number B4006-6-2.50 Standard 6mm 2.50” 1.10” 0.79” S1/4-28X1/4 B4016-6-4.00 B4006-8-2.50 Standard Standard 6mm 8mm 4.00” 2.50” 1.10” 1.26” 0.79” 0.87” S1/4-28X1/4 S5/16-24X1/4 B4016-8-4.00 B4006-10-2.50 Standard Standard 8mm 10mm 4.00” 2.50” 1.26” 1.26” 0.87” 1.00” S5/16-24X1/4 S3/8-24X5/16 B4016-10-4.00 B4006-12-2.50 Standard Standard 10mm 12mm 4.00” 2.50” 1.26” 1.50” 1.00” 1.38” S3/8-24X5/16 S7/16-20X3/8 B4016-12-4.00 B4006-14-2.50 Standard Standard 12mm 14mm 4.00” 2.50” 1.50” 1.61” 1.38” 1.65” S7/16-20X3/8 S9/16-18X1/2 B4016-14-4.00 B4006-16-2.50 Standard Standard 14mm 16mm 4.00” 2.50” 1.61” 1.61” 1.65” 1.65” S9/16-18X1/2 S9/16-18X1/2 B4016-16-4.00 B4006-18-2.50 Standard Standard 16mm 18mm 4.00” 2.50” 1.61” 1.77” 1.65” 1.89” S9/16-18X1/2 S5/8-18X1/2 B4016-18-4.00 B4006-20-2.50 Standard Standard 18mm 20mm 4.00” 2.50” 1.77” 1.77” 1.89” 1.89” S5/8-18X1/2 S5/8-18X1/2 B4016-20-4.00 B4006-25-3.56 Standard Standard 20mm 25mm 4.00” 3.56” 1.77” 2.36” 1.89” 2.36” S5/8-18X1/2 S3/4-16X11/16(2) B4016-25-6.00 B4006-32-3.56 Standard Standard 25mm 32mm 6.00” 3.56” 2.36” 2.56” 2.36” 2.48” S3/4-16X11/16(2) S3/4-16X11/16(2) B4016-32-6.00 Standard 32mm 6.00” 2.56” 2.48” S3/4-16X11/16(2) Part Number L L1 d D Set Screws are included. Back-up screws not included. Accessories: Set Screws Page 28 20 Set Screws for Aerospace Holders Page 28 Tool Jaw Page 212 Pull Stud Pages 139-140 800-543-6237 www.lyndexnikken.com End Mill Holders End Mill Holders BT End Mill Holders BT50 - Inch Part Number Style d L L1 D Set Screw Part Number B5006-0250-3.00 Standard 1/4” 3.00” 1.10” 0.78” S1/4-28X1/4 B5016-0250-6.00 B5006-0375-2.75 Standard Standard 1/4” 3/8” 6.00” 2.75” 1.10” 1.26” 0.78” 1.00” S1/4-28X1/4 S3/8-24X5/16 B5016-0375-6.00 B5006-0500-3.00 Standard Standard 3/8” 1/2” 6.00” 3.00” 1.26” 1.50” 1.00” 1.38” S3/8-24X5/16 S7/16-20X3/8 B5016-0500-6.00 B5006-0625-3.00 Standard Standard 1/2” 5/8” 6.00” 3.00” 1.50” 1.61” 1.38” 1.65” S7/16-20X3/8 S9/16-18X1/2 B5016-0625-6.00 B5006-0750-3.00 Standard Standard 5/8” 3/4” 6.00” 3.00” 1.61” 1.77” 1.65” 1.89” S9/16-18X1/2 S5/8-18X1/2 B5016-0750-6.00 B5006-0875-4.00 Standard Standard 3/4” 7/8” 6.00” 4.00” 1.77” 2.08” 1.89” 2.00” S5/8-18X1/2 S5/8-18X1/2 (2) B5016-0875-6.00 B5006-1000-4.00 Standard Standard 7/8” 1” 6.00” 4.00” 2.08” 2.36” 2.00” 2.36” S5/8-18X1/2 (2) S3/4-16X11/16 (2) B5016-1000-6.00 B5006-1250-4.00 Standard Standard 1” 1-1/4” 6.00” 4.00” 2.36” 2.56” 2.36” 2.48” S3/4-16X11/16 (2) S3/4-16X11/16 (2) B5016-1250-6.00 B5006-1500-4.50 Standard Standard 1-1/4” 1-1/2” 6.00” 4.50” 2.56” 2.83” 2.48” 2.99” S3/4-16X11/16 (2) S3/4-16X11/16 (2) B5016-1500-7.00 B5006-2000-5.00 Standard Standard 1-1/2” 2” 7.00” 5.00” 2.83” 3.34” 2.99” 3.74” S3/4-16X11/16 (2) S1-14X7/8 (2) B5016-2000-8.00 B5006-2500-6.00 Standard Standard 2” 2-1/2” 8.00” 6.00” 3.34” 3.66” 3.74” 4.25” S1-14X7/8 (2) S1-14X7/8 (2) Set Screw Part Number L L1 d D Set Screws are included. Back-up screws not included. BT50 - Metric Part Number Style d L L1 D B5006-6-2.50 Standard 6mm 2.50” 1.10” 0.79” S1/4-28X1/4 B5006-8-2.50 Standard 8mm 2.50” 1.25” 0.87” S5/16-24X1/4 B5006-10-2.75 Standard 10mm 2.75” 1.25” 1.00” S3/8-24X5/16 B5006-12-3.00 Standard 12mm 3.00” 1.50” 1.38” S7/16-20X3/8 B5006-14-3.00 Standard 14mm 3.00” 1.61” 1.65” S9/16-18X1/2 B5006-16-3.00 Standard 16mm 3.00” 1.61” 1.65” S9/16-18X1/2 B5006-18-3.00 Standard 18mm 3.00” 1.77” 1.89” S5/8-18X1/2 B5006-20-3.00 Standard 20mm 3.00” 1.77” 1.89” S5/8-18X1/2 B5006-25-4.00 Standard 25mm 4.00” 2.36” 2.36” S3/4-16X11/16 (2) B5006-32-4.00 Standard 32mm 4.00” 2.55” 2.48” S3/4-16X11/16 (2) B5006-40-4.49 Standard 40mm 4.49” 2.83” 3.07” S3/4-16X11/16 (2) B5006-42-4.49 Standard 42mm 4.49” 2.83” 3.07” S3/4-16X11/16 (2) B5006-50-5.00 Standard 50mm 5.00” 3.34” 3.74” S1-14X7/8 (2) Set Screws are included. Back-up screws not included. Accessories: Set Screws Page 28 Set Screws for Aerospace Holders Page 28 Tool Jaw Page 212 Pull Stud Pages 139-140 21 End Mill Holders 800-543-6237 www.lyndexnikken.com End Mill Holders HSK End Mill Holders • End mill inner bore T.I.R. < 0.0002 • Through-spindle coolant capability • AT3 or better taper TIR: < .0002 run out in ID bore Milling Speed: up to 20,000 rpm Tapping ★★★★✩ ★✩✩✩✩ Set-up: quick and easy Please note that the maximum RPM listed in our catalog may vary depending on the toolholder shank, weight, balanceability and the G rating. Coolant-thru: jet slots (optional) HSK63A d L L1 D Set Screw Part Number HSK63A-0187-3.00 3/16” 3.00” 0.866” 0.748” S8-32X1/4 HSK63A-0187-5.00 HSK63A-0250-3.00 3/16” 1/4” 5.00” 3.00” 0.866” 1.102” 0.748” 0.787” S8-32X1/4 S1/4-28X1/4 HSK63A-0250-5.00 HSK63A-0312-3.00 1/4” 5/16” 5.00” 3.00” 1.102” 1.417” 0.787” 0.874” S1/4-28X1/4 S5/16-24X1/4 HSK63A-0312-5.00 HSK63A-0375-3.50 5/16” 3/8” 5.00” 3.50” 1.417” 1.574” 0.874” 1.00” S5/16-24X1/4 S3/8-24X5/16 HSK63A-0375-5.00 HSK63A-0437-4.00 3/8” 7/16” 5.00” 4.00” 1.574” 1.771” 1.00” 1.378” S3/8-24X5/16 S7/16-20X3/8 HSK63A-0437-5.00 HSK63A-0500-4.00 7/16” 1/2” 5.00” 4.00” 1.771” 1.771” 1.378” 1.378” S7/16-20X3/8 S7/16-20X3/8 HSK63A-0500-5.00 HSK63A-0625-4.00 1/2” 5/8” 5.00” 4.00” 1.771” 1.889” 1.378” 1.654” S7/16-20X3/8 S9/16-18X1/2 HSK63A-0625-5.00 HSK63A-0750-4.50 5/8” 3/4” 5.00” 4.50” 1.889” 1.968” 1.654” 1.889” S9/16-18X1/2 S5/8-18X1/2 HSK63A-0750-6.00 HSK63A-1000-4.50 3/4” 1” 6.00” 4.50” 1.968” 2.755” 1.889” 2.363” S5/8-18X1/2 S3/4-16X11/16 (2) HSK63A-1000-6.00 HSK63A-1250-4.50 1” 1-1/4” 6.00” 4.50” 2.755” 2.952” 2.363” 2.88” S3/4-16X11/16 (2) S3/4-16X11/16 (2) HSK63A-1250-6.00 1-1/4” 6.00” 2.952” 2.88” S3/4-16X11/16 (2) Part Number L L1 d D Set Screws are included. Back-up screws not included. Coolant tube and coolant tube wrench are sold separately. HSK40A d L L1 D Set Screw Part Number HSK40A-0125-75 1/8” 2.95” 0.63” 0.75” S6-32X1/4 HSK40A-0187-75 HSK40A-0250-75 3/16” 1/4” 2.95” 2.95” 0.87” 1.42” 0.75” 0.79” S8-32X1/4 S1/4-28x1/4 HSK40A-0312-75 HSK40A-0375-75 5/16” 3/8” 2.95” 2.95” 1.42” 1.57” 0.87” 1.00” S5/16-24X1/4 S3/8-24X5/16 HSK40A-0437-75 HSK40A-0500-75 7/16” 1/2” 2.95” 2.95” 1.78” 1.78” 1.38” 1.38” S7/16-20X3/8 S7/16-20X3/8 HSK40A-0625-75 HSK40A-0750-75 5/8” 3/4” 2.95” 2.95” 1.89” 1.97” 1.65” 1.89” S9/16-18X1/2 S5/8-18X1/2 Part Number Accessories: Set Screws Page 28 22 Set Screws for Aerospace Holders Page 28 HSK Coolant Tube Page 28 HSK Coolant Tube Wrench Page 28 800-543-6237 www.lyndexnikken.com End Mill Holders End Mill Holders HSK End Mill Holders HSK100A d L L1 D Set Screw Part Number HSK100A-0187-4.00 3/16” 4.00” 0.867” 0.748” S8-32X1/4 HSK100A-0187-6.00 HSK100A-0250-4.00 3/16” 1/4” 6.00” 4.00” 0.867” 1.102” 0.748” 0.787” S8-32X1/4 S1/4-28X1/4 HSK100A-0250-6.00 HSK100A-0312-4.00 1/4” 5/16” 6.00” 4.00” 1.102” 1.220” 0.787” 0.866” S1/4-28X1/4 S5/16-24X1/4 HSK100A-0312-6.00 HSK100A-0375-4.00 5/16” 3/8” 6.00” 4.00” 1.220” 1.260” 0.866” 1.00” S5/16-24X1/4 S3/8-24X5/16 HSK100A-0375-6.00 HSK100A-0437-4.00 3/8” 7/16” 6.00” 4.00” 1.260” 1.496” 1.00” 1.378” S3/8-24X5/16 S7/16-20X3/8 HSK100A-0437-6.00 HSK100A-0500-4.00 7/16” 1/2” 6.00” 4.00” 1.496” 1.575” 1.378” 1.378” S7/16-20X3/8 S7/16-20X3/8 HSK100A-0500-6.00 HSK100A-0625-4.00 1/2” 5/8” 6.00” 4.00” 1.575” 1.693” 1.378” 1.654” S7/16-20X3/8 S9/16-18X1/2 HSK100A-0625-6.00 HSK100A-0750-4.00 5/8” 3/4” 6.00” 4.00” 1.693” 1.969” 1.654” 1.890” S9/16-18X1/2 S5/8-18X1/2 HSK100A-0750-6.00 HSK100A-1000-4.00 3/4” 1” 6.00” 4.00” 1.969” 2.559” 1.890” 2.362” S5/8-18X1/2 S3/4-16X11/16 (2) HSK100A-1000-6.00 HSK100A-1250-4.00 1” 1-1/4” 6.00” 4.00” 2.559” 2.559” 2.362” 2.480” S3/4-16X11/16 (2) S3/4-16X11/16 (2) HSK100A-1250-6.00 1-1/4” 6.00” 2.559” 2.480” S3/4-16X11/16 (2) Part Number L L1 d D Set Screws are included. Back-up screws not included. Coolant tube and coolant tube wrench are sold separately. Accessories: Set Screws Page 28 Set Screws for Aerospace Holders Page 28 HSK Coolant Tube Page 28 HSK Coolant Tube Wrench Page 28 23 End Mill Holders 800-543-6237 www.lyndexnikken.com End Mill Holders NMTB End Mill Holders • End mill inner bore T.I.R. < 0.0002 • Through-spindle coolant capability • AT3 or better taper TIR: < .0002 run out in ID bore Milling Speed: up to 20,000 rpm Tapping ★★★★✩ ★✩✩✩✩ Set-up: quick and easy Please note that the maximum RPM listed in our catalog may vary depending on the toolholder shank, weight, balanceability and the G rating. Coolant-thru: jet slots (optional) NMTB30 d L L1 D Set Screw Part Number N3006-0125-1.75 1/8” 1.75” 0.63” 0.75” S6-32X1/4 N3006-0187-1.75 3/16” 1.75” 0.87” 0.75” S8-32X1/4 N3006-0250-1.75 1/4” 1.75” 1.10” 0.79” S1/4-28X1/4 N3006-0312-1.75 5/16” 1.75” 1.26” 0.87” S5/16-24X1/4 N3006-0375-1.75 3/8” 1.75” 1.26” 1.00” S3/8-24X5/16 N3006-0500-1.75 1/2” 1.75” 1.57” 1.38” S7/16-20X3/8 N3006-0625-1.75 5/8” 1.75” 1.69” 1.43” S9/16-18X1/2 N3006-0750-2.25 3/4” 2.25” 1.85” 1.89” S5/8-18X1/2 N3006-0875-2.50 7/8” 2.50” 1.96” 2.01” S5/8-18X1/2 N3006-1000-2.69 1” 2.69” 2.24” 2.36” S3/4-16X11/16 N3006-1250-3.62 1-1/4” 3.62” 2.24” 2.48” S3/4-16X11/16 (2) d L L1 D Set Screw Part Number N4006-0125-2.31 1/8” 2.31” 0.63” 0.75” S6-32X1/4 N4006-0187-2.31 3/16” 2.31” 0.87” 0.75” S8-32X1/4 N4006-0250-2.31 1/4” 2.31” 1.10” 0.79” S1/4-28X1/4 N4006-0312-2.31 5/16” 2.31” 1.26” 0.87” S5/16-24X1/4 N4006-0375-2.31 3/8” 2.31” 1.26” 1.00” S3/8-24X5/16 N4006-0437-2.31 7/16” 2.31” 1.50” 1.38” S7/16-20X3/8 N4006-0500-2.31 1/2” 2.31” 1.50” 1.38” S7/16-20X3/8 N4006-0625-2.31 5/8” 2.31” 1.61” 1.65” S9/16-18X1/2 N4006-0750-2.31 3/4” 2.31” 1.77” 1.89” S5/8-18X1/2 N4006-0875-2.94 7/8” 2.94” 2.09” 2.01” S5/8-18X1/2 (2) N4006-1000-3.37 1” 3.37” 2.36” 2.36” S3/4-16X11/16 (2) N4006-1250-3.69 1-1/4” 3.69” 2.56” 2.48” S3/4-16X11/16 (2) N4006-1500-3.95 1-1/2” 3.95” 2.56” 2.99” S3/4-16X11/16 (2) Part Number NMTB40 Part Number NMTB shanks are suitable for use with Erickson QC spindles. Set Screws are included. Back-up screws not included. Accessories: Set Screws Page 28 24 Set Screws for Aerospace Holders Page 28 L L1 d D 800-543-6237 www.lyndexnikken.com End Mill Holders End Mill Holders NMTB End Mill Holders NMTB50 d L L1 D Set Screw Part Number N5006-0250-2.75 N5006-0375-2.75 1/4” 3/8” 2.75” 2.75” 1.10” 1.26” 0.79” 1.00” S1/4-28X1/4 S3/8-24X5/16 N5016-0375-4.50 N5006-0500-2.75 3/8” 1/2” 4.50” 2.75” 1.26” 1.50” 1.00” 1.38” S3/8-24X5/16 S7/16-20X3/8 N5016-0500-4.50 N5006-0625-2.75 1/2” 5/8” 4.50” 2.75” 1.50” 1.61” 1.38” 1.65” S7/16-20X3/8 S9/16-18X1/2 N5016-0625-4.50 N5006-0750-2.88 5/8” 3/4” 4.50” 2.88” 1.61” 1.77” 1.65” 1.89” S9/16-18X1/2 S5/8-18X1/2 N5016-0750-4.50 N5006-0875-2.88 3/4” 7/8” 4.50” 2.88” 1.77” 2.09” 1.89” 2.01” S5/8-18X1/2 S5/8-18X1/2 (2) N5016-0875-4.50 N5006-1000-3.50 7/8” 1” 4.50” 3.50” 2.09” 2.36” 2.01” 2.36” S5/8-18X1/2 (2) S3/4-16X11/16 (2) N5016-1000-5.50 N5006-1250-3.50 1” 1-1/4” 5.50” 3.50” 2.36” 2.56” 2.36” 2.48” S3/4-16X11/16 (2) S3/4-16X11/16 (2) N5016-1250-5.50 N5006-1500-4.00 1-1/4” 1-1/2” 5.50” 4.00” 2.56” 2.83” 2.48” 2.99” S3/4-16X11/16 (2) S3/4-16X11/16 (2) N5016-1500-6.00 N5006-2000-4.69 1-1/2” 2” 6.00” 4.69” 2.83” 3.34” 2.99” 3.74” S3/4-16X11/16 (2) S1-14X7/8 (2) Part Number L L1 d D NMTB shanks are suitable for use with Erickson QC spindles. Set Screws are included. Back-up screws not included. Accessories: Set Screws Page 28 Set Screws for Aerospace Holders Page 28 25 End Mill Holders 800-543-6237 www.lyndexnikken.com End Mill Holders R8 and Straight Shank End Mill Holders • End mill inner bore T.I.R. < 0.0002 • Through-spindle coolant capability • AT3 or better taper TIR: < .0002 run out in ID bore Milling Speed: up to 20,000 rpm Tapping ★★★★✩ ★✩✩✩✩ Set-up: quick and easy Please note that the maximum RPM listed in our catalog may vary depending on the toolholder shank, weight, balanceability and the G rating. Coolant-thru: jet slots (optional) R8 d L L1 D Set Screw Part Number 830-008-1.33 1/8” 1.33” 0.63” 0.75” S6-32X1/4 830-012-1.33 3/16” 1.33” 0.87” 0.75” S8-32X1/4 830-016-1.33 1/4” 1.33” 1.10” 0.79” S1/4-28X1/4 830-020-1.75 5/16” 1.75” 1.26” 0.87” S5/16-24X1/4 830-024-1.33 3/8” 1.33” 1.26” 1.00” S3/8-24X5/16 830-028-1.33 7/16” 1.33” 1.50” 1.38” S7/16-20X3/8 830-032-1.33 1/2” 1.33” 1.50” 1.38” S7/16-20X3/8 830-040-1.50 5/8” 1.50” 1.61” 1.65” S9/16-18X1/2 d 830-048-2.37 3/4” 2.37” 1.77” 1.89” S5/8-18X1/2 830-056-2.75 7/8” 2.75” 2.36” 2.01” S5/8-18X1/2 (2) D 830-064-3.25 1” 3.25” 2.76” 2.36” S3/4-16X11/16 (2) 830-080-3.25 1-1/4” 3.25” 2.56” 2.48” S3/4-16X11/16 (2) 830-096-3.75 1-1/2” 3.75” 2.83” 2.99” S3/4-16X11/16 (2) Part Number L1 L Set Screws are included. Back-up screws not included. Straight Shank d L L1 D D1 Set Screw Part Number S7506-0125-6.00 1/8” 6.00” 0.63” .750” 0.50” S6-32X1/4 S7506-0187-6.00 3/16” 6.00” 0.86” .750” 0.56” S8-32X1/4 S7506-0250-6.00 1/4” 6.00” 1.10” .750” 0.75” S1/4-28X1/4 S7506-0312-6.00 5/16” 6.00” 1.26” .750” 0.75” S5/16-24X1/4 S1006-0375-6.00 3/8” 6.00” 1.26” 1.00” 1.00” S3/8-24X5/16 (2) S1006-0500-6.00 1/2” 6.00” 1.49” 1.00” 1.00” S1/4-28x1/4 (2) Part Number D L L1 Set Screws are included. Back-up screws not included. d D1 Accessories: Set Screws Page 28 26 Set Screws for Aerospace Holders Page 28 R8 Collet Page 128 800-543-6237 www.lyndexnikken.com End Mill Holders End Mill Holders Morse Taper End Mill Holders • End mill inner bore T.I.R. < 0.0002 • AT3 or better taper • Tang adapter is removable for draw bar use on MT#2 and #4 holders TIR: < .0001 run out in ID bore Milling Speed: up to 20,000 rpm Tapping Please note that the maximum RPM listed in our catalog may vary depending on the toolholder shank, weight, balanceability and the G rating. Coolant-thru: jet slots (optional) ★★★★✩ ★✩✩✩✩ Set-up: quick and easy Morse Part Number Taper d L L1 D Set Screw Part Number M0206-0125-1.50 M0206-0187-1.50 M0206-0250-1.50 MT#2 MT#2 MT#2 1/8” 3/16” 1/4” 1.50” 1.50” 1.50” 0.67” 0.87” 1.07” 0.75” 0.75” 0.79” S6-32X1/4 S8-32X1/4 S1/4-28X1/4 M0306-0250-1.50 M0206-0312-1.50 MT#3 MT#2 1/4” 5/16” 1.50” 1.50” 1.07” 1.26” 0.79” 0.87” S1/4-28X1/4 S5/16-24X5/16 M0306-0312-1.50 M0206-0375-1.63 MT#3 MT#2 5/16” 3/8” 1.50” 1.63” 1.26” 1.26” 0.87” 1.00” S5/16-24X5/16 S3/8-24X5/16 M0306-0375-1.88 MT#3 3/8” 1.88” 1.26” 1.00” S3/8-24X5/16 M0406-0375-2.00 M0206-0500-1.81 MT#4 MT#2 3/8” 1/2” 2.00” 1.81” 1.35” 1.53” 1.00” 1.26” S3/8-24X5/16 S7/16-20X3/8 M0306-0500-1.94 MT#3 1/2” 1.94” 1.50” 1.38” S7/16-20X3/8 M0406-0500-2.31 M0406-0625-2.50 M0406-0750-2.75 MT#4 MT#4 MT#4 1/2” 5/8” 3/4” 2.31” 2.50” 2.75” 1.46” 1.61” 1.77” 1.38” 1.65” 1.89” S7/16-20X3/8 S9/16-18X1/2 S5/8-18X1/2 L L1 d D Set Screws are included. Back-up screws not included. High-Speed Balanceable End Mill Holders Balanceable End Mill Holders are available in CAT and BT taper styles. Part numbers are identical to standard End Mill Holders part numbers except that there is a “B” at the end. (Ex: C4006-0125B) • 30 and 40 taper toolholders are prebalanced to G2.5 or better at 24,000 RPM • 50 taper toolholders are prebalanced to G2.5 or better at 15,000 RPM • Lyndex-Nikken uses a Patented Balancing Method which allows greater CAT40 HSBalance™ End Mill Holder compensation necessary for extremely high RPM applications. • HSBalance™ toolholders come with a printout of actual balance condition • HSBalance™ toolholders need to be used with balance-qualified pull studs • A balancing machine is required to balance or re-balance toolholders CAT40 HSBalance™ End Mill Holder DIN Accessories: Set Screws Page 28 Set Screws for Aerospace Holders Page 28 27 End Mill Holders 800-543-6237 www.lyndexnikken.com End Mill Holders Accessories Replacement Set Screws for End Mill Holders Part Number Size of Holder Internal Diameter S6-32X1/4 1/8” S8-32X1/4 3/16” S1-14x7/8 2”, 2-1/2” S1/4-28x1/4 1/4”, 6mm S5/16-24X1/4 5/16”, 8mm S3/8-24X5/16 3/8”, 7/16”,10mm S7/16-20X3/8 1/2”, 12mm S9/16-18X1/2 5/8”, 14-16mm S5/8-18X1/2 3/4”, 7/8”, 18-20mm S3/4-16X11/16 1”, 1-1/4”, 1-1/2”, 25-42mm Replacement Set Screws for Aerospace End Mill Holders Part Number Size of Holder Internal Diameter S3/4-16x7/16 S1/2-20UNF S3/8-24UNF 1”, 1-1/4”, 1-1/2”, 2”, 2-1/2” 5/8”, 3/4”, 7/8” 3/8”, 1/2” Coolant Tube for HSK holders Part Number HSK63-TUBE Description Coolant tube for HSK63 holders HSK40-TUBE Coolant tube for HSK40 holders HSK100-TUBE Coolant tube for HSK100 holders Coolant Tube Wrench for HSK holders Part Number Description HSK63-WRENCH Wrench for HSK63 Coolant Tube HSK40-WRENCH Wrench for HSK40 Coolant Tube HSK100-WRENCH Wrench for HSK100 Coolant Tube Coolant tube wrenches are needed to remove or install coolant tubes in HSK toolholders 28
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Author : Goda Advertising Create Date : 2011:06:16 14:53:00-05:00 Modify Date : 2011:06:30 14:43:12-05:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : Acrobat Distiller 6.0.1 for Macintosh Creator Tool : QuarkXPress: pictwpstops filter 1.0 Metadata Date : 2011:06:30 14:43:12-05:00 Document ID : uuid:5f0eca14-9852-11e0-86fe-0014516576fa Instance ID : uuid:9beee94d-f66e-4743-9c3f-39aada901d3d Format : application/pdf Title : EndMill_6.0_gray Creator : Goda Advertising Page Count : 20EXIF Metadata provided by EXIF.tools