R150S Fastfill Systems Catalogue LR
User Manual: R150S
Open the PDF directly: View PDF 
.
Page Count: 24
| Download | |
| Open PDF In Browser | View PDF |
FAST FILL SYSTEMS CATALOGUE Contact Information Pirtek Fluid Systems Pty Ltd 3-7 Garling Road Kings Park NSW 2148 Australia 134-222 @ info@pirtek.com.au sales@pirtek.com.au www.pirtek.com.au PIRTEK Network is the accredited National distributor for Contents Fuel Nozzles 2 Fuel Receivers 8 Vents 9 Pressureless 10 Couplers 12 Matrix 17 Nozzle Tech 22 Copyright © 2013 All rights reserved. No parts of this publication may be reproduced or transmitted in any form or by any means electronic or mechanical including photography, recording or any information storage or retrieval system without prior permission from Fast Fill Systems. 2 2014 TECHNICAL CATALOGUE www.pirtek.com.au 3 FS-N150Cp The Classic nozzle contains traditional components that have been in use for decades. This all-metal nozzle provides the operator with a familiar, proven piece of quality equipment that has a long history of being the standard nozzle of the heavy equipment industry. Max Operating Pressure Max Flow Rate 5.17 75 567 150 4 BAR PSI Min Flow Rate LPM GPM 94.5 25 LPM GPM Fuel Inlet Port Weight 38.1 1-1/2 3.515 7.75 MM IN Latching Mechanism KG LBS 2014 TECHNICAL CATALOGUE Minimum Operating Temp Metal Latching -30 Dogs O C FS-N150PBp Variations The Pitboss diesel fuel nozzle (FS-N150PB) is perfect for users looking for a durable and forgiving diesel fueling solution. The Elastodog latching mechanism improves latching under harsh conditions and the piston-driven shut off engagement improves longevity. • Powder coated non-slip finish for better grip. Max Operating Pressure Max Flow Rate Min Flow Rate 5.17 75 567 150 BAR PSI LPM GPM Standard with plug Underground mining Brine Resistant • All-metal construction and fewer internal components. FS-N150PBp FS-N150PBU FS-N150PB-BR •P lugs are available and strongly recommended. 94.5 25 LPM GPM Fuel Inlet Port Weight 38.1 1-1/2 2.948 6.5 MM IN www.pirtek.com.au Latching Mechanism KG LBS Elastodog Clips Minimum Operating Temp -30 O C 5 Variations FS-N150PSLp The Sureloc diesel fuel nozzle has proven reliable even in the harshest environments. It is customisable to meet specific needs. Its durable, allmetal construction and thick wall main housing makes it optimal for heavy duty operations. The latching mechanism consists of twelve stainless steel ball bearings for a secure latch. Available with either piston or diaphragm control shut off and two flow rate and inlet options, it is our most versatile nozzle. Max Operating Pressure Max Flow Rate 5.17 75 567 150 K Fuel Adaptor 6 BAR PSI • Powder coated non-slip finish for better grip. • Sturdy build for greatly increased lifespan. 94.5 25 • Withstands extreme temperatures. Fuel Inlet Port* LPM GPM 800 Series 800 Series 800 211 567 150 50.1 2 LPM GPM FS-A150A, FS-A150B, FS-A150C Used to splash fill a tank with any fast fill nozzle. Latching Mechanism Weight 38.1 MM 3.6 1-1/2 IN 7.9 * Also available in 2” inlet 800 Series LPM GPM FS-N150SLp FS-N150SL FS-N150SL-2 FS-N150SL800 FS-PSL800 • Ball bearing latching for secure connection. Min Flow Rate LPM GPM Standard with plug Diaphragm Driven 2” Fuel Inlet 2” High Flow 800 LPM/ 211 GPM KG Ball Bearing LBS Minimum Operating Temp -30 O C MM IN K Straight Hose Swivel 2014 TECHNICAL CATALOGUE FS-S150, FS-S200, FS-S215 Straight hose swivels with all aluminium construction. FS-N150Tp Cartridge • Powder coated non-slip finish for better grip. The Titan diesel fuel nozzle blends elements from our Pitboss fuel nozzle with a compact design to create the most compact, lightest diesel fuel nozzle in the industry. In addition to the Elastodog latching mechanism and piston-driven shut off, the field replaceable piston cartridge allows the end-user to bring a worn nozzle back to life. Max Operating Pressure 5.17 75 K Deep Socket Tool BAR PSI • Compact, light weight design. • Elastodog latching. • All metal construction. Max Flow Rate Min Flow Rate Fuel Inlet Port 567 150 94.5 25 38.1 1-1/2 LPM GPM LPM GPM MM IN Latching Mechanism Weight 2.645 6.625 KG LBS Elastodog Clips Minimum Operating Temp -30 O C K FS-AB2 FS-R150SW The FS-R150SW, 2-1/2” deep socket tool is used to install new and remove worn down or damaged receivers In field repair cartridge FS-N150TRC Breakaway Coupler Hose safety breakaway coupler with female NPT threads. Available in following sizes: 1”, 1.25”, 1.5”, 2”, 3”, and 3.25”. www.pirtek.com.au 7 FS-N150Rp The Raptor combines the best features of our nozzles. It has an Elastodog latch for dirty conditions. It has a sturdy build for better durability. Max Operating Pressure 5.17 75 BAR PSI K Weld-On Flange 8 Max Flow Rate 567 150 •P itboss’s latching for easier coupling, even in dirty conditions. •S ureloc’s sturdy build for better durability. Min Flow Rate LPM GPM 94.5 25 LPM GPM Fuel Inlet Port Weight 38.1 1-1/2 3.629 8 MM IN 800 Series 800 Series 800 Series 800 211 567 150 50.1 2 LPM GPM FS-FFF4C Weld-on flange which provides a recessed, protected fill point. The flange has 2” female threads and accepts the FS-R150S standard fuel receivers, FS-R150CV, or FS-PLA 150-M SV. LPM GPM Latching Mechanism KG LBS Elastodog Clips MM IN K Bolt-On Flange FS-FFF5C Bolt-on flange which provides a recessed, protected fill point. The flange has 2” female threads and accepts the FS-R150S standard fuel receivers, FS-R150CV, or FS-PLA 150-M SV. 5-5/16” x 7/16” bolt pattern. 2014 TECHNICAL CATALOGUE Minimum Operating Temp -30 O C I I FS-R150CVc Check Valve Wrench A patented Check Valve Receiver allows fuel to flow in only one direction. Once installed, receivers can be replaced without draining the tank. Spray back from poppet malfunction is eliminated. Fuel theft is minimised. The Check Valve Receiver is compatible with all major manufacturers’ nozzles. Max Operating Pressure 5.17 75 BAR PSI FS-R150CVSW This Check Valve Installation Wrench facilitates installation or removal of the FS-R150CV. The open back design also allows it to be used with FS-R150SW to install or remove the FS-R150CVR. Safety Construction Engineering Engineering Thread Size Eliminates potential fuel spray. Nickel plated steel. Anodised aluminium. Replace receiver without draining tank. Prevents fuel theft. 2” NPT Replacement Receiver FS-R150CVRc L FS-R150Sc Our standard diesel fuel receiver is made from solid steel and is nickel-plated to ensure a long service life. Designed to accommodate flow rates up to 800 LPM (211 GPM), Fast Fill Systems fuel receivers are completely compatible with all major manufacturers’ diesel fuel nozzles. Available shut off options: 7, 9, 11, and 12 PSI. Max Operating Pressure 5.17 75 Compatibility BAR Compatible PSI with all major fuel nozzle manufacturers. Construction Engineering Engineering Thread Size Nickel plated steel. Anodised aluminium. Aluminium poppets instead of plastic. Custom shut off pressures available. 2” NPT Available in Aluminium FS-R150SAc www.pirtek.com.au 9 Fuel Vents Standard diesel fuel vents are crucial to the performance of your fuel nozzle. A standard fuel system needs tank pressure to cause the nozzle to shut off. Our all metal construction fuel vents provide excellent durability and versatility with more than 100 different configurations available. A 2” NPT port on top of tank is required. J FS0-V150 J FS-V150D Standard The basic fuel vent. Fuel Available with a Vent standard 5” stem, Anti Reduces fuel theft and Vandalism tank vandalism. Flange Under-side is threaded with bolt available with 7” (FS-V150L7) and 12” (FS-V150L12) stems as well. pattern on top. This locks the vent in place. Bolts not included. Not compatible with FS-V150W. J FS-V150SR Safety Relief Fuel Vent Used with the FS-V150 where additional over-fill relief is needed. Has a safety relief valve to protect tank from over filling if a nozzle fails. Opens up tank when pressure hits over 13 PSI. J FS-V150A J FS-V150W Whistle Whistles when tank Adaptor reaches internal pressure of 5-7 PSI. This creates a clear signal to operator that nozzle should be shutting off. J FS-V150C NPT Allows for easy hose Adaptor attachment with a 1” FNPT swivel Half 2” FNPT steel half Coupling coupling included. This vent is commonly used in retrofit applications where the required 2” NPT port did not exist. (Requires welding) J FS-V150B adapter on the opening of the vent cap. This method is more durable and seals tighter than the hose barb attachment. J FS-V150H High Designed for fuel Flow rates exceeding 150 GPM, Vent capable of reaching 300 GPM. Bolt-on Bolt on 2” NPT flange included. Flange Commonly used where 2” NPT ports Compatible with all vent configurations. are not available. Drill and tapping is required. Cork seal included, bolts are not. Filter Vents Protect your tank from atmospheric dust accumulation. The dual check valve system allows air to freely vent from the tank through the large vent check valve at rates up to 300 GPM, and directs all air entering the tank through the 3 micron filter media. J FS-FFV150-PL Direct 1” NPT direct mount Mount configuration of our Filter filter vent. Vent J FS-FFV150 Remote Mount Filter Vent 10 Universal mounting bracket for easy installation. Used for remote mounting. J FS-FFV150-LP Direct Mount Filter Vent 1” NPT direct mount configuration of our filter vent. Low profile. J FS-FFV150-HV VB High Volume Vacuum Break Vacuum break check valve for implosion protection. Discharges air at over 300 GPM. 2” Female NPT Inlet port. Vacuum break crack pressure: 1.5 PSI. Exhaust and breather check valve crack pressure: 0.25 PSI. 2014 TECHNICAL CATALOGUE Pressureless Application The Fast Fill Systems Pressureless Diesel Fueling System allows automatic shutoff without introducing pressure to the tank. This is a positive shut off system, which closes the shut off valve by sensing the fluid level in the tank. Venting Air Diesel Fuel Fluid Level H FS-PLA150-M VLCE Vent/ The vent/level control system Level operates using 5” long, 1/2” NPT Control piping, allowing for compatibility Diesel Fuel This system was designed to be used with pressure sensitive nozzles such as the Fast Fill Systems Pitboss and Sureloc. For use with non-pressure sensitive nozzles such as our FS-N150SB bulk transfer nozzle, a pressure switch and time-delay relay on the pump system is recommended. The pressure switch and time-delay relay act as a safeguard against dead-head conditions when the shut off valve closes. H Signal Line FS-PLP-6 Other features include external and internal signal line ports and integrated roll over spill protection. Our Teflon and stainless steel braided signal line can be used both internally and externally. Standard length of 10’. Custom sizes available. The VLCE is precisely engineered to function on the largest tanks with only 4” of operating space. 16” of clearance required for installation. Max Operating Pressure Min Operating Pressure Min Flow Rate 517 75 35 5 95 25 kPa PSI kPa* PSI with more than 80% of heavy equipment used worldwide. 5” length pipe can be extended by cutting and threading a 1/2” pipe to reach the desired shut off level. The VLCE includes extra 1/2” pipe nipples that comes in 2” and 3” lengths and the necessary Loctite thread lock to secure your pipe. LPM GPM * Requirement at the nozzle. Additional plumbing between the pump and the diesel fuel nozzle will add additional pressure drop to the system. www.pirtek.com.au Max Flow Rate 568 150 800 200 LPM GPM LPM* GPM* Diesel Fuel Nozzle Shut off Pressure 48 7 kPa PSI *Flow rates of 200 GPM/ 800 LPM possible when used with diesel fuel nozzles rated for such, e.g. FS-N150SL800 11 H FS-PLA150-M SV Inlet Shut off Valve H Inlet Shut off Valve The typical inlet/shut off valve for a Pressureless system. Designed to be mounted directly to the tank. Requires 2” NPT on the tank and 8-10” of space for installation. 211 GPM max. A receiver may be mounted directly or remotely to the valve (see FS-AD150 and FS-AD150J). Flange mounted shut off valve with 6 bolt pattern designed to replace the FFF5C bolt-on bellhousing. External #6 JIC signal line connection. FS-PLA150-M RRM2 H FS-PLA150-M SV61-E Inlet Shut off Valve Flange mounted shut off valve with 6 bolt 5-3/4” pattern with 2” Code 61 hose mount for remote mounted receiver. External #6 JIC signal line connection. H Evac Port Flange mounted shut off valve with 6 bolt 5-3/4” pattern. Includes 2-Piece direct mount receiver and external #6 JIC signal line connection. FS-PLA150-M EP Receiver replacement evacuation port allows draining of the fuel tank from the standard fill point using a Fast Fill Systems diesel fuel nozzle or our FS-N150SB bulk transfer nozzle. H FS-PLA150-M VF Receiver CAT 120mm 6-bolt vent Flange flange. 12 FS-AD150J Used to adapt from the proprietary thread in our shut off and check valves to a 2” Male JIC. H FS-AD150 H FS-N150SB H FS-R150-TL70-J H FS-PLA150-M PTF H FS-PLA150-M PTSF H FS-PLA150-M RF 2” NPT Adaptor Bulk Nozzle Designed to remotely mount the entire shut off valve and receiver. Receiver (R150CVRc-J) is included. External #6 JIC signal line connection. H FS-PLA150-M SV FE Inlet Shut off Valve 2” JIC Adaptor FS-PLA150-M SVEBH H Remote Mount Can H Twist Lock Receiver Plastic Tank Adaptor Plastic Tank Adaptor Receiver Flange Used to adapt from the proprietary thread in our shut off and check valves to a 2” Female NPT. Provides a higher flow rate than conventional high-flow nozzles for bulk filling. Constructed from aluminium. Has 12 stainless steel latching balls, 2 wiper seals, and actuating ring with non-slip knurled surface. 2 Piece .70mm “Twist Lock” receiver for pressureless applications. 2” NPT adaptor is designed for plastic fuel tanks. Provides the 2” NPT necessary for Pressureless systems. 2” NPT adaptor for plastic fuel tanks. Works well with CAT plastic tanks and fits most CAT splash fill caps. 2” NPT 6-bolt pattern receiver flange fits CAT 5 3/4” PT#221-5303 2014 TECHNICAL CATALOGUE H Features FS-PLA80-SVLC Small Tank Pressureless The FS-PLA80 brings Pressureless fueling to applications where it was once unavailable. This all-in-one drop in system fits standard 2” NPT inlets and enables individual tank fill and shut off for single or multi tank configurations. Once the fuel level reaches 90-95% capacity, each tank will automatically shut off, eliminating under/over filling. The auto shut off feature works with all standard fuel nozzles (up to 80 GPM). With filtered venting and a dry break fill point, contamination is dramatically decreased. This product is ideal for agriculture, small construction, oil extraction and mass transit equipment because of its compact design and ease of installation. INLET/SHUT OFF VALVE 302 80 LPM GPM System easily monitored Fills and vents through the same unit Completely pressureless operation Automatic independent tank shut off Remote receiver mounting Remote or direct filter vent mounting 1-1/4” FNPT fuel inlet threads 1” FNPT vent port threads Standard weight: 3.92 lbs | 1.78 kg FLOAT FLUID BLEED CHANNEL Max High Flow Rate • • • • • • • • • FLUID INLET FLUID INLET 1-1/4” NPT CHANNEL BLEED VALVE VENT PORTS Max Standard Flow Rate Min Flow Rate* Max Operating Temperature 151 40 19 5 150 65.6 LPM GPM LPM GPM F O C VENT CUTLET 1” NPT Min Operating Temperature -30 -34.4 F O C * Check Minimum flow rate for nozzle. www.pirtek.com.au 13 H FS-PLA80 Hydraulic Application The same FS-PLA80 that we developed for small tank diesel applications has been tested and configured for use with hydraulic fluid and diaphragm pumps. Using the FS-R150Sc and FS-SB150, hydraulic tanks can be reliably filled with pressureless shut off up to 125 psi pump pressure. Flow rate will vary depending on the viscosity of the fluid. Hydraulic Pressureless Max Operating Temperature 150º 65.6º F C O Min Operating Temperature -30 -34.4 F C Max Hydraulic Operating Pressure 125 K PSI O Oil Sampling Valve Standard Couplers FS-OS100 The oil sampling valve is used with an existing crankcase line to allow oil samples to be drawn. Four widely used couplers have been the industry standard for decades. They were designed for transferring the primary fluids used on heavy equipment: Crankcase, Coolant, Hydraulic and Transmission fluids. Nozzle and receiver pairs only connect with their corresponding size and colour. D Crankcase Operating Pressure 34.5 500 14 Burst Pressure BAR PSI 103.4 1500 BAR PSI Flow Area Nozzle Thread Receiver Thread .3051 3/4” 3/4” SQ IN MNPT 2014 TECHNICAL CATALOGUE Latching Mechanism MNPT Pin latching F Hydraulic Operating Pressure 34.5 500 Burst Pressure BAR PSI 103.4 1500 BAR PSI Flow Area Nozzle Thread Receiver Thread .2212 .2212 3/4” 3/4” SQ IN SQ IN FNPT Latching Mechanism MNPT Dog Teeth *Ball Bearing E Coolant Max Operating Pressure Burst Pressure 34.5 500 103.4 1500 BAR PSI BAR PSI Flow Area Nozzle Thread Receiver Thread Latching Mechanism .1122 1/2” 1/2” Pin latching SQ IN MNPT MNPT G Transmission Max Operating Pressure Burst Pressure 34.5 500 103.4 1500 BAR PSI BAR PSI Flow Area Nozzle Thread Receiver Thread Latching Mechanism .1136 1/2” 1/2” Dog Teeth SQ IN www.pirtek.com.au MNPT MNPT 15 R Series Couplers Universal Couplers Used for remote bulk-head mounting for common fluids. The receiver’s dual threads are designed to allow bulk-head mounting using the male thread and connection of a hose to the leak-free female ORB thread. R series couplers DO NOT connect with Standard couplers. For both Crankcase and Coolant, these Universal Nozzles fit Standard and R-Series Crankcase and Coolant Receivers. D Burst Pressure 34.5 500 103.4 1500 BAR PSI BAR PSI Flow Area Nozzle Thread Receiver Thread Latching Mechanism .3640 SQ IN 3/4” FNPT OD 1-5/8” 12 TPI ID 1-5/16” 12 TPI Ball Latching Hydraulic Operating Pressure Burst Pressure 34.5 500 103.4 1500 16 FS-N200U Crankcase Operating Pressure F FS-N100U BAR PSI BAR PSI Flow Area Nozzle Thread Receiver Thread .4207 SQ IN 3/4” OD 1-7/8” 12 TPI ID 1-5/8” 12 TPI FNPT 2014 TECHNICAL CATALOGUE Latching Mechanism Ball Latching FS-SB100 K Service Box Boxes can be configured to house any number or type of receivers. By consolidating the location of couplers, speed and safety are increased. E Coolant Visible Height Visible Height 46.2 1.82 29.7 1.17 MM IN Height Height 66.4 MM 2.61 IN 56.4 2.22 MM IN FS-N200Rp Max Operating Pressure BAR PSI 34.5 500 G Burst Pressure 103.4 1500 BAR PSI MM IN FS-R200Rc Flow Area SQ IN .1361 Nozzle Thread FNPT 1/2” Latching Mechanism Receiver Thread OD 1-3/16” 12 TPI ID 7/8” 14 TPI Ball Latching Transmission Visible Height Visible Height 57.9 2.28 39.9 1.57 MM IN Height Height 77.5 3.05 67.2 2.64 MM IN MM IN FS-N400Rp Max Operating Pressure Burst Pressure 34.5 500 103.4 1500 BAR PSI FS-R400Rc Flow Area BAR PSI MM IN .2285 SQ IN Nozzle Thread Receiver Thread 3/4” OD 1-5/16” 12 TPI ID 1-1/16” 12 TPI www.pirtek.com.au FNPT Latching Mechanism Ball Latching 17 Flat Face Matrix 200 Series The Matrix Flat Face coupling line is the ultimate solution in nohassle, contaminate free filling. The “Flat Face” surface on the nozzle allows ease in wiping the dust and dirt from the front end of the nozzle, before coupling, to ensure contaminant-free fluid delivery. The “Flat Face” series includes 13 colour-coded nozzles and receivers designed to physically interlock with only their respective matching colour. FS-FFET 290 One way evac tool acts as a master key to drain all receivers in Flat Face series. FS-FFN210 FS-FFN220 FS-FFN230 FS-FFN240 FS-FFN245 FS-FFN250 *FS-FFN255 FS-FFN260 FS-FFN265 FS-FFN270 *FS-FFN275 * FS-FFN280 FS-FFR210 FS-FFR220 FS-FFR230 FS-FFR240 FS-FFR245 FS-FFR250 FS-FFR255 FS-FFR260 FS-FFR265 FS-FFR270 FS-FFR275 FS-FFR280 FS-FFR285 GREEN BLUE PURPLE GREY CLEAR YELLOW BROWN RED PINK GUNMETAL BLUE Operating Pressure 103 1500 18 BAR PSI TEAL ORANGE 3/4” Thread Construction JIC Nozzle FNPT ReceiverMNPT Anodised aluminium. Nickel plated steel. Colour coded and keyed to prevent cross contamination. All receivers are capable of a JIC fitting. 2014 TECHNICAL CATALOGUE GOLD *FS-FFN285 Caps Recommended Matrix 300 Series Matrix 34 is a series of proprietary couplers designed to prevent cross-contamination of fluids. Matrix couplers work at a higher pressure and flow rate than standard couplers. Each of the 10 nozzles and receivers in the matrix line is colour-coded and designed to physically interlock with only its matching colour. FS-ET 290 One way evac tool acts as a master key to drain all 300 series receivers. FS-N305 FS-N307 FS-N210 FS-N320 FS-N330 FS-N340 FS-N350 FS-N360 FS-N370 FS-N380 FS-R305 PINK FS-R307 BROWN FS-R310 GREEN FS-R320 BLUE FS-R330 PURPLE FS-R340 GREY FS-R350 ORANGE FS-R360 YELLOW FS-R370 RED FS-R380 GOLD Operating Pressure 103 1500 3/4: Thread BAR PSI Nozzle Receiver FNPT MNPT Construction JIC Anodised aluminium. Nickel plated steel. Colour coded and keyed to prevent cross contamination. All receivers are capable of a JIC fitting. www.pirtek.com.au Caps & Plugs Recommended 19 MX High Flow Series Fast Fill Systems now offers the next generation of High Flow Dry-Break Couplers. Constructed from steel for sure latching and durability, the MX-Series comes in 7 different Nozzle-Receiver pairs that can only be connected to their matching colours, eliminating any possibility of cross-contamination. With a robust, grip enhancing actuating ring and solid aluminium caps and plugs, these 1” Dry-Break connectors have been engineered for more than just high flow rates - they are engineered to last! FS-MXN1-1 FS-MXN2-1 FS-MXN3-1 FS-MXR1-1 FS-MXR2-1 FS-MXR3-1 YELLOW TEAL RED Operating Pressure 34.5 500 20 BAR PSI FS-MXET-1 Evac tool acts as a master key to drain all receivers in MX series. FS-MXN4-1FS-MXN5-1 FS-MXN6-1 FS-MXN7-1 FS-MXR4-1FS-MXR5-1 FS-MXR6-1 FS-MXR7-1 PURPLE BLUE COPPER GREY 1” Threads Construction Nozzle FNPT Receiver MNPT Anodised aluminum. Nickel plated steel. Color coded and keyed to prevent cross contamination. 2014 TECHNICAL CATALOGUE Caps & Plugs Recommended FS-GN210 | FS-GR210 The Grease Matrix is a revolutionary patent pending product. This is the first flat-face dry break coupler that will connect and disconnect while maintaining supply pressure. This bulk filling grease coupler will perform with greater efficiency and safety. The system will not allow grease transfer until the couplers are connected properly. This coupler is available in 3/4”, with a maximum deadhead pressure of 5,000 PSI at the integrated ball valve. *Not for use with pressurised or auto-shut off systems. FS-GN210 ORANGE Operating Pressure 345 5000 BAR PSI FS-GR210 ORANGE FS-GN220 GREY FS-GR220 GREY 3/4” Thread Construction Engineering Engineering Nozzle FNPT Receiver MNPT Nickel plated steel. Anodised Aluminium. Dimple & groove guide system. Connects and disconnects under line pressure. www.pirtek.com.au Caps & Plugs Recommended 21 DIESEL RUNS THROUGH OUR VEINS AT 800 LPM Nozzle Rebuilds Nozzle Tech’s rebuild service is more than cleaning parts and lubing seals. Our trained technicians inspect nozzles inside and out. After troubleshooting, the nozzle is rebuilt with new parts, polished, and powder coated. Some say a refurbished nozzle works even better than a new one. Send us your used nozzles today. 22 2014 TECHNICAL CATALOGUE www.pirtek.com.au 23 FAST FILL SYSTEMS CATALOGUE
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes XMP Toolkit : Adobe XMP Core 5.5-c021 79.154911, 2013/10/29-11:47:16 Create Date : 2014:04:10 15:04:26+10:00 Metadata Date : 2014:04:10 15:05:31+10:00 Modify Date : 2014:04:10 15:05:31+10:00 Creator Tool : Adobe InDesign CC (Macintosh) Instance ID : uuid:4cdcc98f-3d0d-ea4d-81b9-20aa4d513cab Original Document ID : xmp.did:902A82F26A81E011B9349407097E049C Document ID : xmp.id:1cab159b-1640-41bd-8dfe-2bf9da1cd3eb Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:8abdf734-f475-4f36-be68-2743024c4a4a Derived From Document ID : xmp.did:17512305-4af9-497c-b22b-61d69320b873 Derived From Original Document ID: xmp.did:902A82F26A81E011B9349407097E049C Derived From Rendition Class : default History Action : converted History Parameters : from application/x-indesign to application/pdf History Software Agent : Adobe InDesign CC (Macintosh) History Changed : / History When : 2014:04:10 15:04:26+10:00 Format : application/pdf Producer : Adobe PDF Library 11.0 Trapped : False Page Count : 24 Creator : Adobe InDesign CC (Macintosh)EXIF Metadata provided by EXIF.tools