PartsManual 5900205 Ferris IS5000Zseries1226andabove Parts Manual
User Manual: 5900205
Open the PDF directly: View PDF 
.
Page Count: 98
Parts
Rev. Date: 5/2007
IS5000Z Series
Zero-Turn Riding Mower
Manual
S/N: 1226 & Above (Tractor) 1210 & Above (Mower)
5023460
5375 North Main Street
Munnsville, NY 13409 USA
800-933-6175
Briggs and Stratton Yard Power Products Group
TP 400-7168-12-5Z-F
Models: Descri
p
tion:
5901070 31.5HP Caterpillar Diesel (S/N: 1226 & above) (IS5000Z/C31D)
5901071 31.5HP Caterpillar Diesel (S/N: 1226 & above) (IS5000Z/C31DCE)
5901074 31.5HP Caterpillar Diesel w/ 61" Mower Deck (S/N: 1226 & above) (IS5000Z/C31D61CE)
5900201 61" Rear Discharge Mower Deck (S/N: 1210 & above) (5000/61R)
5900202 61" Rear Discharge Mower Deck (S/N: 1210 & above) (5000/61RCE)
5900203 72" Mower Deck (S/N: 1210 & above) (5000/72)
5900204 72" Rear Discharge Mower Deck (S/N: 1210 & above) (5000/72R)
5900205 72" Rear Discharge Mower Deck (S/N: 1210 & above) (5000/72RCE)
1
2
Revision
Table Of Content
s
Tor
q
ue S
p
ecification Chart ............................................................................................. Inside Back Cover
MODEL COMPONENTS PAGE
Main Frame & Front Suspension Group ............................................................................................................................
.
4
Hood, Bumper & Shield Group ........................................................................................................................................... 6
Floor Pan, Brake Cover & Control Shields Group .............................................................................................................. 8
Seat Compartment Group .................................................................................................................................................. 10
Seat & Mount Group .......................................................................................................................................................... 12
Fuel Supply Hose & Tank Replacement Parts Group ........................................................................................................ 14
Fuel Tank & Mount Group .................................................................................................................................................. 16
Instrument & Control Panel Group ..................................................................................................................................... 18
En
g
ine Accessories & Service Parts Group ....................................................................................................................... 20
Engine & Mount Group ......................................................................................................................................................
.
24
PTO Clutch & Anchor Group .............................................................................................................................................. 26
Pump Mount & Drive Group ............................................................................................................................................... 28
Motion Control Group - Lower ............................................................................................................................................ 30
Motion Control Group - Upper ............................................................................................................................................ 32
H
y
draulic Group ................................................................................................................................................................. 36
Parkin
g
Brake Group - Lower ............................................................................................................................................. 38
Parking Brake Group - Upper ............................................................................................................................................
.
40
Rear Suspension Group ....................................................................................................................................................
.
42
Deck Lift Group .................................................................................................................................................................. 44
Radiator Mount & Service Parts Group .............................................................................................................................. 48
Gearbox & Mount Group .................................................................................................................................................... 50
Wheels & Tires Group ........................................................................................................................................................ 52
Decals - Brand & Model ..................................................................................................................................................... 54
Decals - Safet
y
& Operation - CE Models .......................................................................................................................... 56
Decals - Safety & Operation - North American Models ...................................................................................................... 58
Oil Cooler, Mount & Radiator Expansion Tank Group ........................................................................................................ 60
61" & 72" Mower Decks - Han
g
er Chains ..........................................................................................................................
.
62
61" Mower Deck - Deflector & Shield ................................................................................................................................. 64
61" Mower Deck - Housing, Covers, Spindles & Blades .................................................................................................... 66
61" Mower Deck - Pulle
y
s, Belt & Idler Arm ....................................................................................................................... 68
61" Mower Deck - Rollers & Casters .................................................................................................................................. 70
72" Mower Deck - Deflector & Shield - Rear Discharge ..................................................................................................... 72
72" Mower Deck - Housing, Covers, Spindles & Blades .................................................................................................... 74
72" Mower Deck - Housin
g
, Covers, Spindles & Blades - Rear Dischar
g
e ........................................................................ 76
72" Mower Deck - Belt, Pulle
y
s & Idler Arm ....................................................................................................................... 78
72" Mower Deck - Rollers & Casters .................................................................................................................................. 80
61" & 72" Mower Decks - Rear Mount Bars ....................................................................................................................... 82
Electrical Schematics -
(
S/N: 1290 & below
)
................................................................................................................... 84-89
Electrical Schematics -
(
S/N: 1291 & above
)
................................................................................................................... 90-95
Main Frame & Front Suspension Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 4
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Main Frame & Front Suspension Group
Footnotes
1 5061383B 1 MAIN FRAME
2 5025284 4 NUT, 3/4-16 Hex Nylon Lock
3 5046093 2 SPACER, .75 x 1.50 x 1.00
4 5022039 4 BALL JOINT, 3/4-16 Male
5 5025265X28 2 BOLT, 3/4-16 x 3-1/2
6 5025093 4 NUT, 3/4-16 Hex Jam
7 5061400 1 SUSPENSION ARM ASSEMBLY - LH, Complete (Includes Ref Nos. 8 and 9)
8 5023343 4 BUSHING, Flange (Qty. (2) per suspension arm)
9 5020095 2 GREASE FITTING
10 5045769B 2 CASTER TIRE MOUNT
11 5022842 2 SHOCK & SPRING ASSEMBLY
12 5025096 4 NUT, 3/8-16 Hex Nylon Lock
13 5025156 4 WASHER, 3/8" SAE
14 5025013X16 4 BOLT, 3/8-16 x 2
15 5022853 1 SPANNER WRENCH
16 5047461 2 SPACER, .75 x 1.00 x .25
17 5025265X24 2 BOLT, 3/4-16 x 3
18 5021072 2 GREASE SEAL
19 5020884 4 BEARING, Tapered Roller
20 5061399 1 SUSPENSION ARM ASSEMBLY - RH, Complete (Includes Ref Nos. 8 and 9)
21 5025160 2 WASHER, 3/4" SAE
22 5025104 2 NUT, 3/4-16 Hex Slotted
23 5021073 2 CAP
24 5025203X10 2 COTTER PIN, 1/8" X 1-1/4"
The above parts group applies to the following Mfg. Nos.:
2007 5
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Hood, Bumper & Shield Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 6
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Hood, Bumper & Shield Group
Footnotes
1 5061433B 1 RADIATOR SHROUD
2 5047555B 1 HOOD
3 5025299X6 6 SCREW, Allen Head, 1/4-20 x 3/4
4 5047552B 1 REAR HOOD SUPPORT
5 5025011X6 4 BOLT, 5/16-18 x 3/4
6 5025155 12 WASHER, 5/16" SAE
7 5048348B 1 FLYWHEEL GUARD-RH (Export models only)
8 5025057 4 NUT, 5/16-18 Hex Nylon Lock
9 5045784B 1 REAR SHIELD
10 5047578B 1 BUMPER
11 5025018X12 2 BOLT, 1/2-20 x 1-1/2
12 5047581B 1 SKID SHIELD
13 5025098 2 NUT, 1/2-20 Hex Nylon Lock
14 5025013X20 2 BOLT, 3/8-16 x 2-1/2
15 5025156 8 WASHER, 3/8" SAE
16 5044992 2 SPACER, .38 x .50 x 1.56
17 5025305 2 WASHER, 3/8 x 1-3/4
18 5025096 2 NUT, 3/8-16 Hex Nylon Lock
19 5025013X10 4 BOLT, 3/8-16 x 1-1/4
20 5025011X8 8 BOLT, 5/16-18 x 1
21 5022308 4 BODY CLIP, 5/16-18
22 5025127 4 NUT, 5/16-18 Hex Small Serrated Flange
23 5025013X8 10 BOLT, 3/8-16 x 1
24 5025128 12 NUT, 3/8-16 Hex Serrated Flange
25 5047545B 1 DEBRIS SHIELD
26 5048349B 1 FLYWHEEL GUARD-LH (Export models only)
27 5047587B 2 SUPPORT PLATE
28 5021029 2 TIE WRAP, 11"
29 5025391 6 NUT, 1/4-20 Hex Nylock Flange
30 5048627B 1 MOUNT, Water Separator
31 5025010X6 4 BOLT, 1/4-20 x 3/4
32 5025154 4 WASHER, 1/4" SAE
33 5022665 4 BODY CLIP, 1/4-20
34 5048557B 2 SIDE BAFFLE
35 5021030 2 TIE WRAP, 5-1/2"
36 5021077 2 GROMMET, 1/2"
37 5050926X17 3 WIPER SEAL, 17"
38 5050926X3 1 WIPER SEAL, 3"
The above parts group applies to the following Mfg. Nos.:
2007 7
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Floor Pan, Brake Cover & Control Shields Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 8
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Floor Pan, Brake Cover & Control Shields Group
Footnotes
1 5025013X8 8 BOLT, 3/8-16 x 1
2 5025156 8 WASHER, 3/8" SAE
3 5047548B 1 SHIELD - RH
4 5025128 8 NUT, 3/8-16 Hex Serrated Flange
5 5047549B 1 SHIELD - LH
6 5022308 2 BODY CLIP, 5/16-18
7 5025340 2 SHOULDER BOLT, 3/8 x 5/8
8 5041600 2 SLEEVE
9 5022816 2 GROMMET
10 5025057 2 NUT, 5/16-18 Hex Nylon Lock
11 5101010 2 SAFETY WALK
12 5045333B 1 FLOOR PAN
13 5044873 1 SAFETY WALK
14 5021877 2 RUBBER PAD
15 5025011X6 2 BOLT, 5/16-18 x 3/4
16 5025155 2 WASHER, 5/16" SAE
17 5047285B 1 HOLD DOWN (Export models only)
18 61547 1 BRAKE COVER PANEL ASSEMBLY (Includes decal)
19 61548 1 BRAKE COVER PANEL ASSEMBLY, Export Model (Includes decal)
The above parts group applies to the following Mfg. Nos.:
2007 9
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Seat Compartment Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 10
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Seat Compartment Group
Footnotes
1 5022596 2 BATTERY HOLDDOWN BOLT
2 5022595 1 BATTERY HOLDDOWN
3 - 1 BATTERY, 12V (BCI58, 500 CCA)
4 5025010X6 4 BOLT, 1/4-20 x 3/4
5 5025169 2 WASHER, 1/4" Lock
6 5025154 2 WASHER, 1/4" SAE
7 5047635B 1 OIL FILTER MOUNT
8 5025011X6 4 BOLT, 5/16-18 x 3/4
9 5025155 4 WASHER, 5/16" SAE
10 5025127 4 NUT, 5/16-18 Hex Small Serrated Flange
11 5046061B 2 HOLD DOWN PLATE
12 5025013X18 4 BOLT, 3/8-16 x 2-1/4
13 5025156 4 WASHER, 3/8" SAE
14 5025096 4 NUT, 3/8-16 Hex Nylon Lock
15 5025126 2 NUT, 1/4-20 Hex Serrated Flange
16 5022594 1 ALARM
17 5021397 3 GROMMET, 1-1/4"
The above parts group applies to the following Mfg. Nos.:
2007 11
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Seat & Mount Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 12
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Seat & Mount Group
Footnotes
1 5022955 1 SEAT, Deluxe, Gray, Complete (Includes Ref No. 2 - 6)
2 5022955X1 1 CUSHION, Bottom Cover
3 5022955X2 1 CUSHION, Back Cover
4 5022955X3 2 ARM REST SET (Includes Ref No. 5)
5 5022955X4 2 ARM REST PADS
6 5020930X3 1 SEAT ADJUSTER RAILS (set of 2)
7 5047744B 1 SEAT MOUNT
8 5046470 1 SEAT STOP ROD
9 5020047 1 COLLAR, 5/16" Set
10 5025013X32 2 BOLT, 3/8-16 x 4
11 5025057 6 NUT, 5/16-18 Hex Nylon Lock
12 5025096 3 NUT, 3/8-16 Hex Nylon Lock
13 5025013X48 1 BOLT, 3/8-16 x 6
14 5025156 1 WASHER, 3/8" SAE
15 5046586 1 SPACER, .38 X .50 X 5.06
16 5022798 1 SPRING, Compression
17 5025326 1 WASHER, 3/8 x 2
18 5022094 1 SWITCH, Plunger, NO/NC
19 5025270 2 SCREW, #10-24 x 1
20 25029 2 NUT, #10-24 Hex
21 5022612 2 RUBBER BUMPER
22 5100652 1 SPRING, EXTENSION, 4" SEAT ADJUSTMENT (Not shown.)
The above parts group applies to the following Mfg. Nos.:
2007 13
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Fuel Supply Hose & Tank Replacement Parts Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 14
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Fuel Supply Hose & Tank Replacement Parts Group
Footnotes
1 5023060 2 VALVE, Fuel Shut-Off
2 1726400 5 GROMMET
3 5022922 9 CLAMP, #4 Hose
4 5050919X36 2 HOSE, 36"
5 5022920 1 FITTING, TEE, 3/8" Hose
6 5050919X34 1 HOSE, 34"
7 5050831X20 2 1/4" Fuel Line, 20" Long
8 5020835 3 CLAMP, Hose
9 1674231 2 ELBOW FITTING
10 5023061 1 ELBOW FITTING
11 5022708 2 FITTING, 1/4" NPT, 90 Deg.
12 5022926 1 FILTER/WATER SEPARATOR ASSEMBLY, Complete (Includes Ref No. 13 - 15)
13 5022926X1 1 FUEL FILTER
14 5022926X2 1 O-RING SEAL
15 5022926X3 1 BOWL
16 5050831X48 1 1/4" Fuel Line, 48" Long
17 5025013X12 2 BOLT, 3/8-16 x 1-1/2
18 5025156 2 WASHER, 3/8" SAE
19 5025096 2 NUT, 3/8-16 Hex Nylon Lock
20 50919-63 1 HOSE, 63"
21 5023069 2 HOSE CLAMP
22 5050925X26 1 HOSE, 26"
23 5023068 1 CONNECTOR FITTING
The above parts group applies to the following Mfg. Nos.:
2007 15
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Fuel Tank & Mount Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 16
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Fuel Tank & Mount Group
Footnotes
1 5049120 1 FUEL TANK, IS5000Z, LH
2 5049121 1 FUEL TANK, IS5000Z, RH
3 5022915 2 FUEL TANK CAP, DIESEL (Yellow center, non-vented)
4 5025139 8 NUT, 5/16-18 Hex Large Serrated Flange
5 5025155 20 WASHER, 5/16" SAE
6 5025011X8 8 BOLT, 5/16-18 x 1
7 5048527B 2 FUEL TANK MOUNT
8 5025011X6 12 BOLT, 5/16-18 x 3/4
9 5025170 12 WASHER, 5/16" Lock
10 5047993B 2 GUARD, Tank Valve
The above parts group applies to the following Mfg. Nos.:
2007 17
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Instrument & Control Panel Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 18
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Instrument & Control Panel Group
Footnotes
1 5049178A 1 CONTROL PANEL-RH
2 5025179X6 2 SCREW, #10-24 x 3/4
3 5022883X4 1 INDICATOR, Glow Plug
4 5022180 1 SWITCH, PTO
5 5022883X1 1 SWITCH, Ignition, Complete (Includes Ref No. 3 & 4)
6 5022883X2 1 KEY, Ignition
7 5022883X3 1 COVER PLATE
8 5025299X4 8 SCREW, Allen Head, 1/4-20 x 1/2
9 5048475 1 THROTTLE STOP PLATE (CE models only)
10 5046392 1 CABLE, Throttle Control, 47-1/2"
11 5025271 2 NUT, #10-24 Hex Nylon Lock
12 5046360 1 HANDLE, Throttle Control, Complete (with knob)
13 5046360X1 1 KNOB
14 5022917 1 FUEL GAUGE
15 5022917X1 1 GROMMET
16 5049177A 1 CONTROL PANEL-LH
17 5100996 1 HOURMETER, Digital
18 5022387 1 GAUGE, Voltmeter
19 5022483 1 GAUGE, Water Temperature
20 5046473 1 GAUGE, Warning, Oil/Temp
The above parts group applies to the following Mfg. Nos.:
2007 19
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Engine Accessories & Service Parts Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 20
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Engine Accessories & Service Parts Group
Footnotes
1 5022883X33 1 AIR INLET HOSE
2 5022883X45 1 AIR CLEANER INDICATOR
3 5022591 1 PRE-CLEANER
4 5022883X44 1 AIR CLEANER BRACKET
5 5022883X29 1 AIR CLEANER ASSEMBLY, Complete (Includes Ref No. 2, 4, 6 - 9)
6 5022883X46 1 AIR CLEANER HOUSING ASSEMBLY
7 5022883X31 1 AIR CLEANER ELEMENT
8 5022883X32 1 AIR CLEANER DUST VALVE
9 5022883X30 1 AIR CLEANER COVER
10 5022883X7 1 OIL FILL CAP
11 5022883X8 2 OIL FILL O-RING SEAL
12 5022883X6 1 OIL FILL EXTENSION
13 5047650 1 BARREL CLAMP
14 5025179X6 2 SCREW, #10-24 x 3/4
15 5025169 2 WASHER, 1/4" Lock
16 5025248 2 BOLT, M6 x 10MM
17 5022901 1 CLAMP
18 5047392 1 THROTTLE BRACKET
19 5025271 1 NUT, #10-24 Hex Nylon Lock
20 5022883X11 1 OIL FILTER
21 5022883X20 1 DIPSTICK
22 5022883X19B 1 FUEL FILTER ASSEMBLY, Complete (Includes 5022883X19C)
23 5022883X19C 1 FILTER ELEMENT
24 5047306 1 STUB SHAFT & FLYWHEEL PLATE ASSEMBLY
25 5025011X10 8 BOLT, 5/16-18 x 1-1/4
26 5025170 12 WASHER, 5/16" Lock
27 5025155 18 WASHER, 5/16" SAE
28 5022883X21 1 OIL PAN PLUG
29 5022883X22 1 WASHER, Oil Pan Plug
30 5025128 2 NUT, 3/8-16 Hex Serrated Flange
31 5025011X8 2 BOLT, 5/16-18 x 1
32 5048600B 1 MUFFLER SUPPORT
33 5025013X14 2 BOLT, 3/8-16 x 1-3/4
34 5100058 1 MUFFLER
35 5023126 1 WIRE GUARD (Export models only)
36 5022308 1 BODY CLIP, 5/16-18
37 5025127 2 NUT, 5/16-18 Hex Small Serrated Flange
38 5025237 4 BOLT, M8 x 25MM
39 5022883X36 1 GASKET, Exhaust Manifold
40 5022883X9 1 FUEL SOLENOID (Not an illustrated part)
41 5022883X10 1 WASHER, Fuel Solenoid (Not an illustrated part)
The above parts group applies to the following Mfg. Nos.:
2007 21
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Engine Accessories & Service Parts Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 22
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Engine Accessories & Service Parts Group
Footnotes
42 5022883X12 1 WATER PUMP (Not an illustrated part)
43 5022883X14 1 WATER HOSE-UPPER (Not an illustrated part)
44 5022883X15 1 WATER HOSE-LOWER (Not an illustrated part)
45 5022883X16 1 GASKET, Water Pump (Not an illustrated part)
46 5022883X17 1 THERMOSTAT (Not an illustrated part)
47 5022883X18 1 GASKET, Thermostat (Not an illustrated part)
48 5022883X23 1 STARTER MOTOR (Not an illustrated part)
49 5022883X24 1 ALTERNATOR (Not an illustrated part)
50 5022883X25 1 BELT (Not an illustrated part)
51 5022883X26 1 FUEL PUMP (Not an illustrated part)
52 5022883X27 1 GASKET, Fuel Pump (Not an illustrated part)
53 5022883X28 3 GLOW PLUG (Not an illustrated part)
54 5022883X38 1 RADIATOR (Not an illustrated part)
55 5022883X39 1 SWITCH, Oil Pressure (Not an illustrated part)
56 5022883X40 1 SWITCH, Water Temperature (Not an illustrated part)
57 5022883X41 1 STARTER SOLENOID (Not an illustrated part)
58 5022883X42 1 SEAL, Rear Main (Not an illustrated part)
59 5022883X43 1 SEAL, Front Main (Not an illustrated part)
60 5022883X47 3 INJECTOR ASSEMBLY (Not an illustrated part)
61 5022883X48 3 WASHER, 4-HOLE (Not an illustrated part)
62 5022883X49 3 WASHER, SEALING (Not an illustrated part)
63 5022883X50 3 WASHER, CRUSH (Not an illustrated part)
64 5022883X54 4 CLAMP, RADIATOR HOSE (Not an illustrated part)
65 5022883X55 1 GASKETS, VALVE COVER (Not an illustrated part)
66 5022883X56 1 PARTS MANUAL, ENGINE (Not an illustrated part)
The above parts group applies to the following Mfg. Nos.:
2007 23
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Engine & Mount Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 24
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Engine & Mount Group
Footnotes
1 5022883 1 ENGINE, Caterpillar 31.5 HP Diesel
2 5025013X20 2 BOLT, 3/8-16 x 2-1/2
3 5025156 5 WASHER, 3/8" SAE
4 5047364B 1 MOTOR MOUNT - RH
5 25357 4 BOLT, M14 x 30MM
6 5025013X8 4 BOLT, 3/8-16 x 1
7 5022896 2 ISO MOUNT, Front
8 5044959 2 SPACER, .38 x .50 x 1.00
9 5025013X24 1 BOLT, 3/8-16 x 3
10 5047381 4 WASHER, 3/8 x 2-1/2
11 5022897 1 ISO MOUNT, Rear (2 piece)
12 5047360B 1 MOTOR MOUNT - Upper
13 5025155 2 WASHER, 5/16" SAE
14 5025249 2 BOLT, M8 x 20MM
15 5025171 2 WASHER, 3/8" Lock
16 5025333 2 BOLT, M10 x 30MM
17 5047380 1 SPACER, .38 x .62 x 1.62
18 5025096 3 NUT, 3/8-16 Hex Nylon Lock
19 5025128 4 NUT, 3/8-16 Hex Serrated Flange
20 5047365B 1 MOTOR MOUNT - LH
- See your local Caterpillar engine dealer for parts & service.
The above parts group applies to the following Mfg. Nos.:
2007 25
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PTO Clutch & Anchor Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 26
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
PTO Clutch & Anchor Group
Footnotes
1 5025011X8 5 BOLT, 5/16-18 x 1
2 5047563B 1 CLUTCH ANCHOR
3 5021030 1 TIE WRAP, 5-1/2"
4 5025127 2 NUT, 5/16-18 Hex Small Serrated Flange
5 5025045 3 NUT, 5/16-24, Hex Nylon Lock
6 5025155 2 WASHER, 5/16" SAE
7 5044617 3 WASHER, Clutch Anchor
8 5043636 1 CLUTCH ANCHOR PAD
9 5050407X2 1 KEY, 1/4 SQ. X 3
10 5022575 1 BELT, Clutch Drive (set of 2)
11 5045473 1 CRANKSHAFT BOLT, 7/16 x 1-1/2
12 5045475 1 SPACER, .45 x 1.88 x .38
13 5022884 1 PTO CLUTCH
14 5025013X24 1 BOLT, 3/8-16 x 3
15 5025156 4 WASHER, 3/8" SAE
16 5022797 1 PULLEY, Idler
17 5025128 2 NUT, 3/8-16 Hex Serrated Flange
18 1608395 1 SPRING, Extension
19 5025100 1 NUT, 3/8-16 Hex Side Lock
20 5046916 1 SPACER, .51 x 1.75 x .75
21 5022250 2 BUSHING, Flange
22 5020095 1 GREASE FITTING
23 5046565B 1 CLUTCH DRIVE IDLER ARM
24 5045305 1 PIVOT SLEEVE, Long
25 5025158 1 WASHER, 1/2" SAE
26 5025056 1 NUT, 1/2-13 Hex Nylon Lock
27 5025321 1 SCREW HOOK, 3/8-16 x 4-1/4
28 5025096 1 NUT, 3/8-16 Hex Nylon Lock
The above parts group applies to the following Mfg. Nos.:
2007 27
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Pump Mount & Drive Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 28
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Pump Mount & Drive Group
Footnotes
1 5025098 4 NUT, 1/2-20 Hex Nylon Lock
2 5044913 4 WASHER, Frame Retaining
3 5047361B 1 PUMP MOUNT PLATE
4 5025018X14 4 BOLT, 1/2-20 x 1-3/4
5 5022382 2 PULLEY, Pump Drive
6 5022383 2 HUB, Taper Lock
7 5023254 2 KEY, 5MM SQ. x 25MM w/ Round Ends
8 5025010X8 4 BOLT, 1/4-20 x 1
9 5022899 1 PULLEY, Pump Drive
10 5050404X4 1 KEY, 5/16 SQ. X 1-1/4
11 5022314 1 BELT, Pump Drive (set of 2)
12 5025017X40 1 BOLT, 1/2-13 x 5
13 5022847 1 SPRING, Extension, Swivel End
14 5025158 1 WASHER, 1/2" SAE
15 5050857X3P25 1 HOSE, 3-1/4
16 5025301 1 NUT, 1/2-13 Hex Jam
17 5025013X36 1 BOLT, 3/8-16 x 4-1/2
18 5042142B 1 SPRING ANCHOR
19 5044933 2 SPACER, .39 x .75 x .38
20 5025305 1 WASHER, 3/8 x 1-3/4
21 5025100 1 NUT, 3/8-16 Hex Side Lock
22 5025156 8 WASHER, 3/8" SAE
23 5047199 1 SPACER, .38 x .50 x .75
24 5022373 1 PULLEY, Idler, Flat
25 5022157 2 BUSHING, Brass
26 5046574B 1 PUMP DRIVE IDLER ARM
27 5045135 1 SPACER, .39 X 1.00 X 2.55
28 5045475 1 SPACER, .45 x 1.88 x .38
29 5025013X24 1 BOLT, 3/8-16 x 3
30 5025056 1 NUT, 1/2-13 Hex Nylon Lock
31 5025013X8 6 BOLT, 3/8-16 x 1
32 5025128 6 NUT, 3/8-16 Hex Serrated Flange
33 5025096 1 NUT, 3/8-16 Hex Nylon Lock
The above parts group applies to the following Mfg. Nos.:
2007 29
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Motion Control Group - Lower
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 30
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Motion Control Group - Lower
Footnotes
1 5046393B 2 CONTROL ROD
2 5025035 2 NUT, 3/8-24 Hex
3 5047589 2 LINK, Neutral Adjust
4 25317 2 NUT, 3/8-24 Hex, LH
5 5025013X16 2 BOLT, 3/8-16 x 2
6 5025156 2 WASHER, 3/8" SAE
7 5022392 2 BALL JOINT, 3/8-24 LH, Female
8 5025126 2 NUT, 1/4-20 Hex Serrated Flange
9 5044933 2 SPACER, .39 x .75 x .38
10 5045863 2 CONTROL ARM
11 5025010X14 2 BOLT, 1/4-20 x 1-3/4
12 5025096 2 NUT, 3/8-16 Hex Nylon Lock
The above parts group applies to the following Mfg. Nos.:
2007 31
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Motion Control Group - Upper
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 32
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Motion Control Group - Upper
Footnotes
1 5047410B 1 CONTROL HANDLE - LH
2 5047411B 1 CONTROL HANDLE - RH (Not Shown)
3 5022068 2 GRIP, Foam
4 5025011X6 6 BOLT, 5/16-18 x 3/4
5 5047137 2 REVERSE RETURN BOLT
6 5047401B 1 NEUTRAL RETURN PLATE
7 5022645 2 SPRING, Compression
8 5025155 6 WASHER, 5/16" SAE
9 5025139 6 NUT, 5/16-18 Hex Large Serrated Flange
10 5025045 2 NUT, 5/16-24, Hex Nylon Lock
11 5025033 2 NUT, 5/16-24 Hex
12 5025211 2 HAIRPIN CLIP
13 5020979 2 CLEVIS, 5/16-24, Plastic
14 5025213X8 2 CLEVIS PIN, 5/16 x 1
15 5025127 6 NUT, 5/16-18 Hex Small Serrated Flange
16 5025055X10 2 BOLT, 5/16-18 x 1-1/4 TFL
17 5025013X14 6 BOLT, 3/8-16 x 1-3/4
18 5047375B 1 MOTION CONTROL SHAFT - LH
19 5047374B 1 MOTION CONTROL SHAFT - RH (Not Shown)
20 5025096 14 NUT, 3/8-16 Hex Nylon Lock
21 5021098 2 BEARING, Flange
22 5025013X8 2 BOLT, 3/8-16 x 1
23 5025128 4 NUT, 3/8-16 Hex Serrated Flange
24 5022912 2 DAMPENER
25 5025013X20 2 BOLT, 3/8-16 x 2-1/2
26 5025165 4 WASHER, 3/8" Fender
27 5047408 2 SPACER, .39 x .75 x .50
28 5025013X18 2 BOLT, 3/8-16 x 2-1/4
29 5046393B 2 CONTROL ROD
30 5025035 2 NUT, 3/8-24 Hex
31 5025156 4 WASHER, 3/8" SAE
32 5021124 2 BALL JOINT, 3/8-24 Male
33 5021499 2 BEARING, Flange
34 5025013X10 4 BOLT, 3/8-16 x 1-1/4
35 5025055X16 4 BOLT, 5/16-18 x 2 TFL
36 5048531B 2 NEUTRAL LOCK PLATE
37 5021379 2 GROMMET, 7/8"
38 5025270 4 SCREW, #10-24 x 1
39 5022438 2 SWITCH, Plunger, NO/NO
40 25029 4 NUT, #10-24 Hex
41 5047004 2 CONTROL LEVER BASE
The above parts group applies to the following Mfg. Nos.:
2007 33
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Motion Control Group - Upper
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 34
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Motion Control Group - Upper
Footnotes
42 5025170 4 WASHER, 5/16" Lock
43 5025011X6 4 BOLT, 5/16-18 x 3/4
The above parts group applies to the following Mfg. Nos.:
2007 35
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Hydraulic Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 36
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Hydraulic Group
Footnotes
1 5022437 1 CAP, Reservoir
2 5045872 1 HYDRAULIC OIL RESERVOIR
3 5022601 5 FITTING, NPT - JIC #8
4 5048573 1 HOSE ASSEMBLY (24")
5 5022377 1 OIL COOLER
6 5022604 1 FITTING, TEE, JIC #8
7 5048574 1 HOSE ASSEMBLY (13-1/2")
8 5048576 1 HOSE ASSEMBLY (25")
9 5048575 1 HOSE ASSEMBLY (29")
10 5047612 1 HOSE ASSEMBLY (10")
11 5020986 1 PLUG, 1/2" NPT
12 5021356 1 FILTER HEAD
13 5021357 1 FILTER
14 5022602 1 FITTING, TEE, JIC #8, NPT
15 5047611 1 HOSE ASSEMBLY (24")
16 5047610 1 HOSE ASSEMBLY (40")
17 5022368 2 HYDRAULIC WHEEL MOTOR, Complete (Includes Ref No. 18 & 19)
18 5022042X2 2 KEY
19 5022042X3 2 NUT, CASTLE, 1-20
20 5022914 4 HYDRAULIC HOSE ASSEMBLY
21 5022599 4 FITTING, O-Ring, 90 Deg.
22 5022375 1 HYDRAULIC PUMP - LH
23 5022376 1 HYDRAULIC PUMP - RH
24 5025203X16 2 PIN, COTTER, 1/8" X 2"
The above parts group applies to the following Mfg. Nos.:
2007 37
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Parking Brake Group - Lower
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 38
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Parking Brake Group - Lower
Footnotes
1 5025013X18 2 BOLT, 3/8-16 x 2-1/4
2 5025156 6 WASHER, 3/8" SAE
3 5047125 2 SPACER, .39 x 1.00 x .88
4 5041930 2 SPACER, .38 x .50 x .27
5 5025096 2 NUT, 3/8-16 Hex Nylon Lock
6 5025045 2 NUT, 5/16-24, Hex Nylon Lock
7 5025155 2 WASHER, 5/16" SAE
8 5022361 2 SPRING, Compression
9 5047382B 2 LINK, Brake Lock
10 5023324 2 CABLE, Brake
11 5049388B 1 BRACKET, Cable Mount-LH
12 5049389B 1 BRACKET, Cable Mount-RH (Not Shown)
13 5023320 2 SPRING, Compression
14 5025164 2 WASHER, 5/16" Fender
15 5025033 2 NUT, 5/16-24 Hex
16 5025213X8 2 CLEVIS PIN, 5/16 x 1
17 5023323 2 CLEVIS, Steel, 5/16-24
18 5025203X10 2 COTTER PIN, 1/8" X 1-1/4"
19 25400 4 SHOULDER BOLT, 1/2" x 2-3/4"
20 5023300 2 BRAKE HUB
21 5023299 2 BRAKE CALIPER
22 5049391A 2 BRAKE CALIPER MOUNT
23 5025128 4 NUT, 3/8-16 Hex Serrated Flange
The above parts group applies to the following Mfg. Nos.:
2007 39
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Parking Brake Group - Upper
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 40
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Parking Brake Group - Upper
Footnotes
1 1722302 1 GRIP
2 5045619B 1 BRAKE HANDLE
3 5025095 2 NUT, 1/4-20 Hex Nylon Lock
4 5025011X8 2 BOLT, 5/16-18 x 1
5 5025127 2 NUT, 5/16-18 Hex Small Serrated Flange
6 5045616B 1 BRAKE HANDLE MOUNT
7 5025010X14 2 BOLT, 1/4-20 x 1-3/4
8 5025128 6 NUT, 3/8-16 Hex Serrated Flange
9 5025013X6 4 BOLT, 3/8-16 x 3/4
10 5021098 2 BEARING, Flange
11 5045610B 1 BRAKE HANDLE SHAFT
12 5045618B 1 BRAKE LINKAGE PIVOT
13 5025010X6 2 BOLT, 1/4-20 x 3/4
14 5025154 2 WASHER, 1/4" SAE
15 5025058X14 1 BOLT, 3/8-16 x 1-3/4 TFL
16 5045621B 1 SWITCH MOUNT BRACKET
17 5025126 2 NUT, 1/4-20 Hex Serrated Flange
18 5022182 2 SWITCH, Plunger, Snap-In, NO/NC
The above parts group applies to the following Mfg. Nos.:
2007 41
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Rear Suspension Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 42
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Rear Suspension Group
Footnotes
1 5025298 2 SET SCREW, Square Head, 1/2-13 x 3
2 5025301 2 NUT, 1/2-13 Hex Jam
3 5025056 12 NUT, 1/2-13 Hex Nylon Lock
4 5025394 4 NUT, 3/8-16 Hex Nylock Flange
5 5043815 2 SPACER, .39 x 1.00 x .75
6 5025165 8 WASHER, 3/8" Fender
7 5025013X22 2 BOLT, 3/8-16 x 2-3/4
8 5022912 2 DAMPENER
9 5025013X16 2 BOLT, 3/8-16 x 2
10 5045904 2 SPRING COMPRESSION PLATE
11 5045898 2 SPRING RETAINER
12 5061181 2 SPRING, Compression
13 5045601B 1 SPRING SADDLE-LH
14 5045602B 1 SPRING SADDLE-RH (Not Shown)
15 5045588B 2 WHEEL MOTOR MOUNT
16 5025018X24 4 BOLT, 1/2-20 x 3
17 5025018X20 4 BOLT, 1/2-20 x 2-1/2
18 5046059B 2 SPACER PLATE
19 5025017X52 2 BOLT, 1/2-13 x 6-1/2
20 5025017X60 2 BOLT, 1/2-13 x 7-1/2
21 5025098 8 NUT, 1/2-20 Hex Nylon Lock
22 5061178 4 CAST A-ARM
23 5025294 8 BOLT, Allen Head, 1/2-13 x 3
The above parts group applies to the following Mfg. Nos.:
2007 43
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Deck Lift Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 44
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Deck Lift Group
Footnotes
1 5061232B 1 DECK LIFT LOCK
2 5025158 2 WASHER, 1/2" SAE
3 5025210 1 HAIRPIN CLIP
4 5045058B 1 DECK LIFT PEDAL
5 5022044 1 PIN, Clevis, 1/2 x 2-1/2
6 5025010X6 1 BOLT, 1/4-20 x 3/4
7 5020639 1 SPRING, Extension
8 5025126 2 NUT, 1/4-20 Hex Serrated Flange
9 5023241 1 COLLAR, Split, 1/2
10 5025096 10 NUT, 3/8-16 Hex Nylon Lock
11 5022097 1 CAP
12 5044987B 1 ARM, Deck Lift Pivot
13 5061307B 1 DECK HEIGHT PLATE
14 5044992 4 SPACER, .38 x .50 x 1.56
15 5025013X22 4 BOLT, 3/8-16 x 2-3/4
16 5023082 1 PIN, 1/2 x 3-1/2 w/ Lanyard
17 5044993 1 LIFT PIVOT BOLT
18 5025013X10 4 BOLT, 3/8-16 x 1-1/4
19 5025018X24 2 BOLT, 1/2-20 x 3
20 5044994B 2 DECK LIFT LINK
21 5025098 2 NUT, 1/2-20 Hex Nylon Lock
22 5025282 1 NUT, 5/8-11 Hex Jam Nylon Lock
23 5025392 2 NUT, 5/16-18 Hex Nylock Flange
24 5061355B 2 EYEBOLT ANCHOR
25 5025034 4 NUT, 3/8-16 Hex
26 5025011X8 2 BOLT, 5/16-18 x 1
27 5025516 4 PIN, Roll, 3/16 x 1-1/2
28 5021253 4 SHIM
29 5023343 4 BUSHING, Flange
30 5020095 6 GREASE FITTING
31 5061354 1 LIFT FRAME ASSEMBLY - LH, Complete (Includes Ref No. 27)
32 5061353 1 LIFT FRAME ASSEMBLY - RH, Complete (Includes Ref No. 27, Not Shown)
33 5025056 6 NUT, 1/2-13 Hex Nylon Lock
34 5022434 8 BALL JOINT, 1/2-20 Male
35 5047027 4 SPACER, .51 X .75 X .56
36 5061358B 2 DECK LIFT PIVOT - LH
37 5061357B 2 DECK LIFT PIVOT - RH (Not Shown)
38 5049777 2 SPACER, .52 x 1.00 x 1.00
39 5025158 4 WASHER, 1/2" SAE
40 5025017X32 4 BOLT, 1/2-13 x 4
41 - 8 NUT, 1/2-20 Hex
The above parts group applies to the following Mfg. Nos.:
2007 45
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Deck Lift Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 46
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Deck Lift Group
Footnotes
42 5061350 2 DECK LIFT ROD - OUTER
43 5043607 2 SPACER, .50 x 1.00 x 2.00
44 5061349 2 DECK LIFT ROD - INNER
45 5021811 2 EYEBOLT, 3/8" x 8"
46 5023392 2 DECK LIFT SPRING
47 25017-18 2 BOLT, 1/2-13 x 2-1/4
48 5025013X16 2 BOLT, 3/8-16 x 2
49 5025156 2 WASHER, 3/8" SAE
50 5061227 2 DECK PIVOT BUSHING
51 5061224B 2 SPRING LINK
52 5025326 2 WASHER, 3/8 x 2
53 5061348B 1 DECK LIFT SHAFT & MOUNT ASSEMBLY
The above parts group applies to the following Mfg. Nos.:
2007 47
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Radiator Mount & Service Parts Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 48
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Radiator Mount & Service Parts Group
Footnotes
1 5023129 1 SCREEN
2 5023150 1 PRESSURE CAP
3 5023127 1 RADIATOR
4 5048534B 1 SCREEN BRACKET-RH
5 5023128 1 FAN SHROUD
6 5023158 20 BOLT, Flange Head, 5/16-18 x 1/2
7 5023134 1 FINGER GUARD-RH
8 5025057 4 NUT, 5/16-18 Hex Nylon Lock
9 5025155 7 WASHER, 5/16" SAE
10 5048578B 1 RADIATOR MOUNT PLATE
11 5025249 2 BOLT, M8 x 20MM
12 5025170 3 WASHER, 5/16" Lock
13 5025337 2 WASHER, 5/16" USS
14 5025011X6 1 BOLT, 5/16-18 x 3/4
15 5048579B 1 RADIATOR MOUNT BRACKET
16 5023130 1 ISO-MOUNT, Top
17 5023135 1 FINGER GUARD-LH
18 5023131 2 ISO-MOUNT, Bottom (2 piece)
19 5025305 2 WASHER, 3/8 x 1-3/4
20 5025096 2 NUT, 3/8-16 Hex Nylon Lock
21 5048503B 1 RADIATOR MOUNT
22 25197 8 WASHER, 1/2" USS
23 5025383 4 BOLT, M14 x 25MM
24 5025382 4 BOLT, M14 x 35MM
25 5022308 2 BODY CLIP, 5/16-18
26 5048565B 1 RETAINING PLATE
27 5048563 1 LOWER SEAL
28 5048564B 1 RETAINING PLATE, Outer
29 5025011X8 5 BOLT, 5/16-18 x 1
30 5023151 1 PETCOCK VALVE
31 5048533B 1 SCREEN BRACKET-LH
32 5061419 1 OVERFLOW HOSE
The above parts group applies to the following Mfg. Nos.:
2007 49
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Gearbox & Mount Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 50
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Gearbox & Mount Group
Footnotes
1 5022378 1 GEARBOX
2 5046349B 2 GEARBOX MOUNT BRACKET
3 5022908 1 PULLEY, Gearbox Input
4 5100039 2 KEY, 1/4 SQ. X 1
5 5025010X8 4 BOLT, 1/4-20 x 1
6 5020819 2 BUSHING, Tapered Hub
7 5022794 1 PULLEY, Spindle
8 5025038 3 NUT, 1/2-13 Hex
9 5044913 3 WASHER, Frame Retaining
10 25324-16 3 CARRIAGE BOLT, 1/2-13 x 2
11 5025334 1 CARRIAGE BOLT, 1/2-13 x 7
12 5025011X8 8 BOLT, 5/16-18 x 1
13 5025170 8 WASHER, 5/16" Lock
14 5025155 8 WASHER, 5/16" SAE
The above parts group applies to the following Mfg. Nos.:
2007 51
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Wheels & Tires Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 52
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Wheels & Tires Group
Footnotes
1 5023136 2 WHEEL & TIRE ASSEMBLY, 13 x 6.5 x 6, Complete (Includes Ref No. 2 - 5)
2 5022577 2 TIRE, Front, 13 x 6.5 x 6
3 5023136X1 2 WHEEL ASSEMBLY, for 13 x 6.5 x 6 Tires, Complete (Includes Ref No. 4 & 5)
4 5022631SX2 4 BEARING, Taper Roller (2 per tire)
5 5022631SX3 4 GREASE SEAL (2 per tire)
6 5047103 4 ADAPTER, Caster Wheel (2 per tire)
7 5025017X72 2 BOLT, 1/2-13 x 9
8 5025056 2 NUT, 1/2-13 Hex Nylon Lock
9 5023363 2 WHEEL & TIRE ASSEMBLY, 26 x 12 x 12, Complete (Includes Ref No. 10 & 11)
10 5023152X1 2 TIRE, Rear, 26 x 12 x 12
11 5023364 2 WHEEL ASSEMBLY, 12 x 8.5
12 5022215 10 WHEEL LUG, 1/2 x 1-5/8
The above parts group applies to the following Mfg. Nos.:
2007 53
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Decals - Brand & Model
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 54
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Decals - Brand & Model
Footnotes
1 5022227 1 DECAL, Ferris Logo, 6-3/8"
2 5022556 1 DECAL, Ferris Logo, 5"
3 5022239 1 DECAL, First w/ Independent Suspension
4 5022555 1 DECAL, IS Independent Suspension
5 5022929 2 DECAL, CAT Diesel Power
6 5022813 1 DECAL, 61"
7 5022814 1 DECAL, 72"
The above parts group applies to the following Mfg. Nos.:
2007 55
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Decals - Safety & Operation - CE Models
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 56
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Decals - Safety & Operation - CE Models
Footnotes
1 5049200 1 DECAL, Control Panel
2 5061108 1 DECAL, Main, CE
3 5061217 1 DECAL, Danger, Open Flame
4 5061042 3 DECAL, Warning, Hand In Belt (Two on deck, one under rear belt guard)
5 1720389 2 DECAL, Warning, Mower
6 5061246 2 DECAL, Pinch Point, CE
7 1725941 1 DECAL, CZT Hydro Release
8 1704473 1 DECAL, Hot Surface
9 5047696 1 DECAL, Priming Instructions
10 5022063 1 DECAL, Deck Height
11 5045923 1 DECAL, Oil Reservoir
12 5047554 1 DECAL, Fuse Location
13 5021036 2 DECAL, Grease Daily
The above parts group applies to the following Mfg. Nos.:
2007 57
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Decals - Safety & Operation - North American Models
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 58
© Copyright Briggs and Stratton. All Rights Reserved.
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Decals - Safety & Operation - North American Models
Footnotes
1 5049200 1 DECAL, Control Panel
2 5061106 1 DECAL, Main
3 5049658 1 DECAL, Danger
4 5020337 2 DECAL, Warning
5 5061245 2 DECAL, Pinch Point
6 1704277 1 DECAL, Danger (Chute In Place)
7 1704276 1 DECAL, Danger (Hand Under Deck)
8 5047696 1 DECAL, Priming Instructions
9 5022063 1 DECAL, Deck Height
10 5045923 1 DECAL, Oil Reservoir
11 5047554 1 DECAL, Fuse Location
12 5021036 2 DECAL, Grease Daily
The above parts group applies to the following Mfg. Nos.:
2007 59
© Copyright Briggs and Stratton. All Rights Reserved.
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Oil Cooler, Mount & Radiator Expansion Tank Group
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 60
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
Oil Cooler, Mount & Radiator Expansion Tank Group
Footnotes
1 5025011X8 5 BOLT, 5/16-18 x 1
2 5025155 5 WASHER, 5/16" SAE
3 5048577B 2 OIL COOLER PIVOT PLATE
4 48582 1 OVERFLOW HOSE
5 5020835 1 CLAMP, Hose
6 5022883X34 1 EXPANSION TANK, Complete (Includes Ref No. 7)
7 5022883X35 1 CAP
8 5025010X8 2 BOLT, 1/4-20 x 1
9 5025154 2 WASHER, 1/4" SAE
10 5025095 3 NUT, 1/4-20 Hex Nylon Lock
11 5025139 4 NUT, 5/16-18 Hex Large Serrated Flange
12 5022308 2 BODY CLIP, 5/16-18
13 5048580B 1 COOLER PIVOT ANCHOR
14 5025299X4 5 SCREW, Allen Head, 1/4-20 x 1/2
15 5048581B 1 COOLER LOCK BRACKET
16 5020602 2 COLLAR, 1" Split
17 5022319 1 KNOB
18 5025126 4 NUT, 1/4-20 Hex Serrated Flange
19 5022377 1 OIL COOLER
20 5048562B 1 OIL COOLER MOUNT
The above parts group applies to the following Mfg. Nos.:
2007 61
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
61" & 72" Mower Decks - Hanger Chains
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 62
© Copyright Briggs and Stratton. All Rights Reserved.
5900203
(
S/N: 1210 & above
)
(
5000/72
)
5900204
(
S/N: 1210 & above
)
(
5000/72R
)
5900205
(
S/N: 1210 & above
)
(
5000/72RC
5900201
(
S/N: 1210 & above
)
(
5000/61R
)
5900202
(
S/N: 1210 & above
)
(
5000/61RC
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
61" & 72" Mower Decks - Hanger Chains
Footnotes
1 5025096 4 NUT, 3/8-16 Hex Nylon Lock
2 5025084 4 NUT, 3/8-16 Hex Jam
3 5025156 12 WASHER, 3/8" SAE
4 5050878X3 2 CHAIN, 3 LINKS
5 5025013X14 6 BOLT, 3/8-16 x 1-3/4
6 5025128 4 NUT, 3/8-16 Hex Serrated Flange
7 5045026 2 FRONT DECK HANGER
8 5025038 2 NUT, 1/2-13 Hex
9 5025158 4 WASHER, 1/2" SAE
10 5025056 2 NUT, 1/2-13 Hex Nylon Lock
11 5050878X5 2 CHAIN, 5 LINKS
The above parts group applies to the following Mfg. Nos.:
2007 63
© Copyright Briggs and Stratton. All Rights Reserved.
5900203
(
S/N: 1210 & above
)
(
5000/72
)
5900204
(
S/N: 1210 & above
)
(
5000/72R
)
5900205
(
S/N: 1210 & above
)
(
5000/72RC
5900201
(
S/N: 1210 & above
)
(
5000/61R
)
5900202
(
S/N: 1210 & above
)
(
5000/61RC
TP 400-7168-12-5Z-F
61" Mower Deck - Deflector & Shield
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 64
© Copyright Briggs and Stratton. All Rights Reserved.
5900201
(
S/N: 1210 & above
)
(
5000/61R
)
5900202
(
S/N: 1210 & above
)
(
5000/61RC
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
61" Mower Deck - Deflector & Shield
Footnotes
1 5025057 11 NUT, 5/16-18 Hex Nylon Lock
2 5048418B 1 SHIELD
3 5025011X8 7 BOLT, 5/16-18 x 1
4 5025145X8 4 CARRIAGE BOLT, 5/16-18 x 1
5 5048244B 1 DEFECTOR MOUNT
6 5048243 1 RUBBER DEFLECTOR
7 5048245B 1 RETAINING PLATE
The above parts group applies to the following Mfg. Nos.:
2007 65
© Copyright Briggs and Stratton. All Rights Reserved.
5900201
(
S/N: 1210 & above
)
(
5000/61R
)
5900202
(
S/N: 1210 & above
)
(
5000/61RC
TP 400-7168-12-5Z-F
61" Mower Deck - Housing, Covers, Spindles & Blades
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 66
© Copyright Briggs and Stratton. All Rights Reserved.
5900201
(
S/N: 1210 & above
)
(
5000/61R
)
5900202
(
S/N: 1210 & above
)
(
5000/61RC
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
61" Mower Deck - Housing, Covers, Spindles & Blades
Footnotes
1 5300066 1 DECK SHELL W/DECALS, 61" REAR DISCHARGE (Includes safety decals.)
2 5061157B 1 DECK SHIELD - RH
3 5061156B 1 DECK SHIELD - LH
4 5022308 6 BODY CLIP, 5/16-18
5 5025155 6 WASHER, 5/16" SAE
6 5025011X6 6 BOLT, 5/16-18 x 3/4
7 5025394 18 NUT, 3/8-16 Hex Nylock Flange
8 5049438 3 SPINDLE ASSEMBLY, Complete
9 5025390X10 18 BOLT, Flange Head, 3/8-16 x 1-1/4
10 5020842 3 MOWER BLADE, 21"
11 5023272 3 MOWER BLADE, SAND, 21" (Applies to CE model only)
12 5025477 3 WASHER, 5/8" GRADE 8, YZ
13 5025320X14 3 BOLT, 5/8-11 x 1-3/4
14 5023156 12 BOLT, Flange Head, 5/16-18 x 1-1/4 (Applies to CE model only)
15 5047408 8 SPACER, .39 x .75 x .50 (Applies to CE model only)
16 5025392 12 NUT, 5/16-18 Hex Nylock Flange (Applies to CE model only)
17 5061412B 1 BLOWOUT BAFFLE - LH (Applies to CE model only)
18 5061413B 1 BAFFLE REINFORCEMENT (Applies to CE model only)
19 5061411B 1 BLOWOUT BAFFLE - RH (Applies to CE model only)
The above parts group applies to the following Mfg. Nos.:
2007 67
© Copyright Briggs and Stratton. All Rights Reserved.
5900201
(
S/N: 1210 & above
)
(
5000/61R
)
5900202
(
S/N: 1210 & above
)
(
5000/61RC
TP 400-7168-12-5Z-F
61" Mower Deck - Pulleys, Belt & Idler Arm
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 68
© Copyright Briggs and Stratton. All Rights Reserved.
5900201
(
S/N: 1210 & above
)
(
5000/61R
)
5900202
(
S/N: 1210 & above
)
(
5000/61RC
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
61" Mower Deck - Pulleys, Belt & Idler Arm
Footnotes
1 5023123 1 BELT
2 5025017X36 1 BOLT, 1/2-13 x 4-1/2
3 5025150 2 WASHER, 1/2" USS
4 5045022 1 SPACER, .52 x 1.00 x 3.50
5 5021541 2 BUSHING, Flange
6 5020095 1 GREASE FITTING
7 5045019B 1 IDLER ARM
8 5025018X24 1 BOLT, 1/2-20 x 3
9 5025098 2 NUT, 1/2-20 Hex Nylon Lock
10 5025158 4 WASHER, 1/2" SAE
11 5021976 4 PULLEY, Idler
12 5045023 2 SPACER, .52 x 1.00 x .44
13 5023340 1 SPRING, Extension, Swivel End
14 5025096 1 NUT, 3/8-16 Hex Nylon Lock
15 5025128 1 NUT, 3/8-16 Hex Serrated Flange
16 5025056 1 NUT, 1/2-13 Hex Nylon Lock
17 5022800 1 HOLE PLUG
18 5025018X28 3 BOLT, 1/2-20 x 3-1/2
19 5025058X14 1 BOLT, 3/8-16 x 1-3/4 TFL
20 5045024B 3 IDLER PULLEY MOUNT
21 5020815 3 PULLEY, Spindle
22 5022726 3 KEY, 1/4 SQ. X 1-1/2
23 5020819 3 BUSHING, Tapered Hub
24 5025010X8 6 BOLT, 1/4-20 x 1
The above parts group applies to the following Mfg. Nos.:
2007 69
© Copyright Briggs and Stratton. All Rights Reserved.
5900201
(
S/N: 1210 & above
)
(
5000/61R
)
5900202
(
S/N: 1210 & above
)
(
5000/61RC
TP 400-7168-12-5Z-F
61" Mower Deck - Rollers & Casters
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 70
© Copyright Briggs and Stratton. All Rights Reserved.
5900201
(
S/N: 1210 & above
)
(
5000/61R
)
5900202
(
S/N: 1210 & above
)
(
5000/61RC
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
61" Mower Deck - Rollers & Casters
Footnotes
1 5020785 1 ROLLER
2 5041655B 1 PIN, Roller Mount
3 5025155 1 WASHER, 5/16" SAE
4 5025011X8 1 BOLT, 5/16-18 x 1
5 5025139 1 NUT, 5/16-18 Hex Large Serrated Flange
6 5025128 4 NUT, 3/8-16 Hex Serrated Flange
7 5025013X8 4 BOLT, 3/8-16 x 1
8 5048537B 1 CASTER MOUNT-LH
9 5048536B 1 CASTER MOUNT-RH
10 5025013X36 2 BOLT, 3/8-16 x 4-1/2
11 5045992 2 SPACER, .39 x .63 x 2.56
12 1716353 2 GAUGE WHEEL
13 5046446 2 SPACER, .39 x 1.00 x .79
14 5025096 2 NUT, 3/8-16 Hex Nylon Lock
The above parts group applies to the following Mfg. Nos.:
2007 71
© Copyright Briggs and Stratton. All Rights Reserved.
5900201
(
S/N: 1210 & above
)
(
5000/61R
)
5900202
(
S/N: 1210 & above
)
(
5000/61RC
TP 400-7168-12-5Z-F
72" Mower Deck - Deflector & Shield - Rear Discharge
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 72
© Copyright Briggs and Stratton. All Rights Reserved.
5900204
(
S/N: 1210 & above
)
(
5000/72R
)
5900205
(
S/N: 1210 & above
)
(
5000/72RC
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
72" Mower Deck - Deflector & Shield - Rear Discharge
Footnotes
1 5025145X6 3 CARRIAGE BOLT, 5/16-18 x 3/4
2 5048418B 1 SHIELD
3 5025057 9 NUT, 5/16-18 Hex Nylon Lock
4 5025011X8 9 BOLT, 5/16-18 x 1
5 5048469B 1 DEFLECTOR MOUNT
6 5025155 3 WASHER, 5/16" SAE
7 5025170 3 WASHER, 5/16" Lock
8 5048470 1 RUBBER DEFLECTOR
9 5048471B 1 RETAINING PLATE
The above parts group applies to the following Mfg. Nos.:
2007 73
© Copyright Briggs and Stratton. All Rights Reserved.
5900204
(
S/N: 1210 & above
)
(
5000/72R
)
5900205
(
S/N: 1210 & above
)
(
5000/72RC
TP 400-7168-12-5Z-F
72" Mower Deck - Housing, Covers, Spindles & Blades
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 74
© Copyright Briggs and Stratton. All Rights Reserved.
5900203
(
S/N: 1210 & above
)
(
5000/72
)
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
72" Mower Deck - Housing, Covers, Spindles & Blades
Footnotes
1 5061288 1 RUBBER CHUTE ASSEMBLY, Complete (Includes Ref No. 2 - 6)
2 5025394 3 NUT, 3/8-16 Hex Nylock Flange
3 5061293B 1 CHUTE FRAME
4 5402403 1 RUBBER CHUTE
5 5061290B 1 CHUTE SUPPORT
6 5025013X10 3 BOLT, 3/8-16 x 1-1/4
7 5025045 2 NUT, 5/16-24, Hex Nylon Lock
8 5061300 1 CHUTE MOUNT ROD
9 5025392 13 NUT, 5/16-18 Hex Nylock Flange
10 5025411 1 BOLT, Flange Head, 5/16-18 x 3/4
11 5061213B 1 SPINDLE COVER - RH
12 5061214B 1 SPINDLE COVER - LH
13 5300062 1 DECK SHELL W/DECALS, 72" SIDE DISCHARGE (Includes safety decals.)
14 5022308 6 BODY CLIP, 5/16-18
15 5025155 6 WASHER, 5/16" SAE
16 5025011X6 6 BOLT, 5/16-18 x 3/4
17 5025394 18 NUT, 3/8-16 Hex Nylock Flange
18 5049438 3 SPINDLE ASSEMBLY, Complete
19 5025390X10 18 BOLT, Flange Head, 3/8-16 x 1-1/4
20 5022476 3 MOWER BLADE, 25"
21 5025477 3 WASHER, 5/8" GRADE 8, YZ
22 5025320X14 3 BOLT, 5/8-11 x 1-3/4
The above parts group applies to the following Mfg. Nos.:
2007 75
© Copyright Briggs and Stratton. All Rights Reserved.
5900203
(
S/N: 1210 & above
)
(
5000/72
)
TP 400-7168-12-5Z-F
72" Mower Deck - Housing, Covers, Spindles & Blades - Rear Discharge
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 76
© Copyright Briggs and Stratton. All Rights Reserved.
5900204
(
S/N: 1210 & above
)
(
5000/72R
)
5900205
(
S/N: 1210 & above
)
(
5000/72RC
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
72" Mower Deck - Housing, Covers, Spindles & Blades - Rear Discharge
Footnotes
1 5300068 1 DECK SHELL W/DECALS, 72 RD (Includes safety decals.)
2 5061213B 1 SPINDLE COVER - RH
3 5061214B 1 SPINDLE COVER - LH
4 5022308 6 BODY CLIP, 5/16-18
5 5025155 6 WASHER, 5/16" SAE
6 5025011X6 6 BOLT, 5/16-18 x 3/4
7 5025394 18 NUT, 3/8-16 Hex Nylock Flange
8 5049438 3 SPINDLE ASSEMBLY, Complete
9 5025390X10 18 BOLT, Flange Head, 3/8-16 x 1-1/4
10 5022476 3 MOWER BLADE, 25"
11 5023273 3 MOWER BLADE, SAND, 25" (Applies to CE model only)
12 5025477 3 WASHER, 5/8" GRADE 8, YZ
13 5025320X14 3 BOLT, 5/8-11 x 1-3/4
14 5023156 12 BOLT, Flange Head, 5/16-18 x 1-1/4 (Applies to CE model only)
15 5047408 8 SPACER, .39 x .75 x .50 (Applies to CE model only)
16 5025392 12 NUT, 5/16-18 Hex Nylock Flange (Applies to CE model only)
17 5061409B 1 BLOWOUT BAFFLE - LH (Applies to CE model only)
18 5061413B 1 BAFFLE REINFORCEMENT (Applies to CE model only)
19 5061408B 1 BLOWOUT BAFFLE - RH (Applies to CE model only)
The above parts group applies to the following Mfg. Nos.:
2007 77
© Copyright Briggs and Stratton. All Rights Reserved.
5900204
(
S/N: 1210 & above
)
(
5000/72R
)
5900205
(
S/N: 1210 & above
)
(
5000/72RC
TP 400-7168-12-5Z-F
72" Mower Deck - Belt, Pulleys & Idler Arm
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 78
© Copyright Briggs and Stratton. All Rights Reserved.
5900203
(
S/N: 1210 & above
)
(
5000/72
)
5900204
(
S/N: 1210 & above
)
(
5000/72R
)
5900205
(
S/N: 1210 & above
)
(
5000/72RC
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
72" Mower Deck - Belt, Pulleys & Idler Arm
Footnotes
1 5022439 1 BELT
2 5025017X36 1 BOLT, 1/2-13 x 4-1/2
3 5025150 2 WASHER, 1/2" USS
4 5045022 1 SPACER, .52 x 1.00 x 3.50
5 5021541 2 BUSHING, Flange
6 5020095 1 GREASE FITTING
7 5045019B 1 IDLER ARM
8 5025018X24 1 BOLT, 1/2-20 x 3
9 5025098 2 NUT, 1/2-20 Hex Nylon Lock
10 5025158 4 WASHER, 1/2" SAE
11 5021976 4 PULLEY, Idler
12 5045023 2 SPACER, .52 x 1.00 x .44
13 5023340 1 SPRING, Extension, Swivel End
14 5025096 1 NUT, 3/8-16 Hex Nylon Lock
15 5025128 1 NUT, 3/8-16 Hex Serrated Flange
16 5025056 1 NUT, 1/2-13 Hex Nylon Lock
17 5025058X14 1 BOLT, 3/8-16 x 1-3/4 TFL
18 5025018X28 3 BOLT, 1/2-20 x 3-1/2
19 5045024B 3 IDLER PULLEY MOUNT
20 5022794 3 PULLEY, Spindle
21 5022726 3 KEY, 1/4 SQ. X 1-1/2
22 5020819 3 BUSHING, Tapered Hub
23 5025010X8 6 BOLT, 1/4-20 x 1
The above parts group applies to the following Mfg. Nos.:
2007 79
© Copyright Briggs and Stratton. All Rights Reserved.
5900203
(
S/N: 1210 & above
)
(
5000/72
)
5900204
(
S/N: 1210 & above
)
(
5000/72R
)
5900205
(
S/N: 1210 & above
)
(
5000/72RC
TP 400-7168-12-5Z-F
72" Mower Deck - Rollers & Casters
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 80
© Copyright Briggs and Stratton. All Rights Reserved.
5900203
(
S/N: 1210 & above
)
(
5000/72
)
5900204
(
S/N: 1210 & above
)
(
5000/72R
)
5900205
(
S/N: 1210 & above
)
(
5000/72RC
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
72" Mower Deck - Rollers & Casters
Footnotes
1 5020785 1 ROLLER
2 5041655B 1 PIN, Roller Mount
3 5025156 1 WASHER, 3/8" SAE
4 5025013X8 1 BOLT, 3/8-16 x 1
5 5025128 5 NUT, 3/8-16 Hex Serrated Flange
6 5020655 2 PIN, Lynch
7 5041476 6 SPACER, 1.02 x 1.56 x .50
8 5021541 4 BUSHING, Flange
9 5046965B 2 CASTER MOUNT ARM
10 5020095 2 GREASE FITTING
11 5025013X6 4 BOLT, 3/8-16 x 3/4
12 5022098 2 CAP, Plastic
13 5045034B 2 CASTER ROLLER PIN
14 5045188B 2 CASTER YOKE
15 5022060 2 ROLLER, Caster
16 5025011X6 2 BOLT, 5/16-18 x 3/4
17 5025127 2 NUT, 5/16-18 Hex Small Serrated Flange
18 5025292 2 WASHER, 5/16" GD9
The above parts group applies to the following Mfg. Nos.:
2007 81
© Copyright Briggs and Stratton. All Rights Reserved.
5900203
(
S/N: 1210 & above
)
(
5000/72
)
5900204
(
S/N: 1210 & above
)
(
5000/72R
)
5900205
(
S/N: 1210 & above
)
(
5000/72RC
TP 400-7168-12-5Z-F
61" & 72" Mower Decks - Rear Mount Bars
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
The above parts group applies to the following Mfg. Nos.:
2007 82
© Copyright Briggs and Stratton. All Rights Reserved.
5900203
(
S/N: 1210 & above
)
(
5000/72
)
5900204
(
S/N: 1210 & above
)
(
5000/72R
)
5900205
(
S/N: 1210 & above
)
(
5000/72RC
5900201
(
S/N: 1210 & above
)
(
5000/61R
)
5900202
(
S/N: 1210 & above
)
(
5000/61RC
TP 400-7168-12-5Z-F
PART NO. DESCRIPTIONREF NO. QTY.
61" & 72" Mower Decks - Rear Mount Bars
Footnotes
1 5045009 2 DECK PUSHER BAR, Complete (Includes Ref No. 13)
2 5020095 2 GREASE FITTING
3 5025093 2 NUT, 3/4-16 Hex Jam
4 5025265X24 2 BOLT, 3/4-16 x 3
5 5022111 4 ROD END SEAL
6 5022039 2 BALL JOINT, 3/4-16 Male
7 5025160 2 WASHER, 3/4" SAE
8 5025284 2 NUT, 3/4-16 Hex Nylon Lock
9 5025096 2 NUT, 3/8-16 Hex Nylon Lock
10 5045037B 2 PUSHER BAR MOUNT PIN
11 5025013X10 2 BOLT, 3/8-16 x 1-1/4
12 5025156 4 WASHER, 3/8" SAE
13 5023344 8 BUSHING (Qty. (4) per pusher bar)
The above parts group applies to the following Mfg. Nos.:
2007 83
© Copyright Briggs and Stratton. All Rights Reserved.
5900203
(
S/N: 1210 & above
)
(
5000/72
)
5900204
(
S/N: 1210 & above
)
(
5000/72R
)
5900205
(
S/N: 1210 & above
)
(
5000/72RC
5900201
(
S/N: 1210 & above
)
(
5000/61R
)
5900202
(
S/N: 1210 & above
)
(
5000/61RC
TP 400-7168-12-5Z-F
Electrical Schematic - Charging Circuit
(S/N: 1290 & below) 168escc0
The above parts group applies to the following Mfg. Nos.:
2007 84
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Electrical Schematic - Cranking Circuit
(S/N: 1290 & below) 168escr0
The above parts group applies to the following Mfg. Nos.:
2007 85
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Electrical Schematic - Operator Presence/Safety Circuit
(S/N: 1290 & below) 168esci0
The above parts group applies to the following Mfg. Nos.:
2007 86
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Electrical Schematic - PTO & Hourmeter Circuit
(S/N: 1290 & below) 168escp0
The above parts group applies to the following Mfg. Nos.:
2007 87
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Electrical Schematic - Gauges & Alarm Circuit
(S/N: 1290 & below) 168escg0
The above parts group applies to the following Mfg. Nos.:
2007 88
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Electrical Schematic - Glow Plug Heat Circuit
(S/N: 1290 & below) 168esch0
The above parts group applies to the following Mfg. Nos.:
2007 89
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Electrical Schematic - Charging Circuit
(S/N: 1291 & above) 168escc1
The above parts group applies to the following Mfg. Nos.:
2007 90
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Electrical Schematic - Cranking Circuit
(S/N: 1291 & above) 168escr1
The above parts group applies to the following Mfg. Nos.:
2007 91
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Electrical Schematic - Operator Presence/Safety Circuit
(S/N: 1291 & above) 168esci1
The above parts group applies to the following Mfg. Nos.:
2007 92
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Electrical Schematic - PTO & Hourmeter Circuit
(S/N: 1291 & above) 168escp1
The above parts group applies to the following Mfg. Nos.:
2007 93
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Electrical Schematic - Gauges & Alarm Circuit
(S/N: 1291 & above) 168escg1
The above parts group applies to the following Mfg. Nos.:
2007 94
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Electrical Schematic - Glow Plug Heat Circuit
(S/N: 1291 & above) 168esch1
The above parts group applies to the following Mfg. Nos.:
2007 95
© Copyright Briggs and Stratton. All Rights Reserved.
5901071
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901070
(
S/N: 1226 & above
)
(
IS5000Z/C3
5901074
(
S/N: 1226 & above
)
(
IS5000Z/C3
TP 400-7168-12-5Z-F
Torque Specification Chart
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Hardware
Grade
SAE Grade 2 SAE Grade 5 SAE Grade 8
Size Of
in/lbs in/lbs
in/lbs
Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32
19
2.1
30
3.4
41
4.6
8-36
20
2.3
31
3.5
43
4.9
10-24
27
3.1
43
4.9
60
6.8
10-32
31
3.5
49
5.5
68
7.7
1/4-20
66
7.6 810.9 12 16.3
1/4-28
76
8.6 10 13.6 14 19.0
5/16-18 11 15.0 17 23.1 25 34.0
5/16-24 12 16.3 19 25.8 27 34.0
3/8-16 20 27.2 30 40.8 45 61.2
3/8-24 23 31.3 35 47.6 50 68.0
7/16-14 30 40.8 50 68.0 70 95.2
7/16-20 35 47.6 55 74.8 80 108.8
1/2-13 50 68.0 75 102.0 110 149.6
1/2-20 55 74.8 90 122.4 120 163.2
9/16-12 65 88.4 110 149.6 150 204.0
9/16-18 75 102.0 120 163.2 170 231.2
5/8-11 90 122.4 150 204.0 220 299.2
5/8-18 100 136 180 244.8 240 326.4
3/4-10 160 217.6 260 353.6 386 525.0
3/4-16 180 244.8 300 408.0 420 571.2
7/8-9 140 190.4 400 544.0 600 816.0
7/8-14 155 210.8 440 598.4 660 897.6
1-8 220 299.2 580 788.8 900 1,244.0
1-12 240 326.4 640 870.4 1,000 1,360.0
Hex Head Capscrew
Hex Nut
Lockwasher
Washer
Carriage Bolt
NOTES
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
Hardware Identification & Torque Specifications
Common Hardware Types
Screw, 1/2 x 2
Body
Diameter
Body
Length
Inside
Diameter
Nut, 1/2”
No
Marks
3/8” Bolt or Nut
Wrench—9/16”
3/8
5/16” Bolt or Nut
Wrench—1/2”
5/16
1/4” Bolt or Nut
Wrench—7/16”
1/4
1/2” Bolt or Nut
Wrench—3/4”
1/2
DIA.
7/16
DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
Wrench & Fastener Size Guide
Standard Hardware Sizing
When a washer or nut is identified as 1/2”, this is the
Nominal size
, meaning the
inside diameter
is 1/2 inch; if a
second number is present it represent the
threads per inch
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the
Nominal size
, or
body diameter
is 1/2 inch; the
second number represents the
threads per inch
(16 in this
example, and the final number is the
body length
of the
bolt or screw (in this example 2 inches long).
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
0
1/4 3/4
1/2
1
1/4 3/4
1/2
2
1/4 3/4
1/2
3
1/4 3/4
1/2
4
www.ferrisindustries.com
© Copyright Briggs and Stratton Corporation
All Rights Reserved. Printed In USA.
2007
5375 North Main Street
Munnsville, NY 13409 USA
800-933-6175
Briggs and Stratton Yard Power Products Group
IS5000Z Series
Zero-Turn Riding Mower
S/N: 1226 & Above (Tractor) 1210 & Above (Mower)
IT IS THE POLICY OF FERRIS INDUSTRIES TO IMPROVE ITS PRODUCTS WHENEVER IT
IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE
CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY
OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS MANUFACTURED
Parts
Manual
