Gard 4

User Manual: Gard 4

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadGard 4
Open PDF In BrowserView PDF
The range
230V A.C. Barriers

G4041 Automatic barrier in galvanized and painted steel with 230V A.C. operator with control panel.
G4041I Automatic barrier in brushed AISI 304 stainless steel with 230V A.C. operator with control panel.

Automatic road
barriers
for passages
of up to
3.75 m / 12.3 ft

230V A.C. Electronics

ZG5
ZG6
RSE  	

Plus control panel.
Basic control panel.
Function management control board for ZG5.

24V D.C. Barriers
Made in Italy

G4040 Automatic barrier in galvanized and painted steel with 24V D.C. operator with control panel.
G4040I Automatic barrier in satin-finish AISI 304 stainless steel with 24V D.C. operator with control panel.

24V D.C. Electronics
ZL38
LB38

Technical features
Type

G4041 / G4041I

G4040 /G4040I

Protection rating

IP54

IP54

Power supply (V)

230 A.C 50/60Hz

230 A.C 50/60Hz

Motor power supply (V)

230 A.C 50/60Hz

24 D.C.

Power (W)

250

300

Current draw (A)

2,2

15

Reduction ratio (i)

1/202

1/202

Max torque (Nm)

220

600

Opening time (s)

4

2 ÷ 6

Duty cycle (%)

30

intensive use

Operating temperature (°C)

-20 ÷ +55

-20 ÷ +55

Cabinet colour

Grey textured metal finish 0530837 Grey textured metal finish 0530837

Cover colour

RAL 9006

RAL 9006
230V A.C.

24V D.C.

General information
Composition of the bar

Max opening clearance		

m		

ft

		

3,75 		

12,3

Bar with shock-resistant profile and luminous cord				

3,75 		

12,3

Bar with rack

Bar with shock-resistant profile				
					

		

3,75 		

12,3

Bar with luminous cord and rack				

		

3,75 		

12,3

Bar with shock-resistant profile and mobile barrier support			

3,75 		

12,3

Bar with shock-resistant profile, luminous cord and mobile barrier support

3,75 		

12,3

Bar with rack and mobile barrier support				

3,50 		

11,5

Bar with luminous cord, rack and mobile barrier support		

3,50		

11,5

new

Dimensions
340

Gard

1173

1204

Up to 3,75 / m 12, 3 ft

884

A new concept of
automatic barrier
320

217

© Came DEP5620 06/2007

For its quality processes
management Came Cancelli
Automatici is ISO 9001:2000
certified, and for its
environmental management
it is ISO 14001 certified.
Came designs and
manufactures entirely
in Italy.

Control board fitted to take Came radio frequency cards.
Emergency battery card.

www.came.it - info@came.it
The data and information shown in this catalogue are subject to change without the obligation to give prior notice by Came cancelli automatici S.p.A.

Innovation and design for
all-inclusive safety: these are the
most recent additions to the Gard
barrier line family. Soft contours
and rounded corners to counteract
the “sail effect” for a barrier that
incorporates perfectly into a
diversity of installation settings.

Gard4
Automatic
road barriers

The 230V electronics
The Gard series barriers are constructed with next-generation electronics
that guarantee total control of the automatic system, improving
and increasing the usual safety and control functions, such as:

Designed for a range of large openings up to 3,75 m / 12,3 ft, the new Gard
barriers are the ideal solution for control of roads and parking areas for
industrial and public use.
The Gard series is available in the 230V A.C. motor and the 24V D.C.
motor versions.

The new series offers
many new features, all
marked by innovation

Maximum safety.
An electronic contact automatically
interrupts the power supply voltage
as soon as the inspection door is
opened.

> Comprehensive AUTOTEST of all the safety devices
connected to the system prior to activating the motor (electronic autotest).
> Electronic control of the movement
of the bar with obstacles detection (anti-crushing function).
> Safety feature even when the bar is stationary
all controls are invalidated if an obstacle is detected by the safety devices.

The advantages of 24V barriers
Streets, parking areas, collective areas or simply specific functional and
security needs of the system can call for the use of a Gard system with
24V technology.
> Frequent blackouts
The electronics of a Gard 24V system automatically recognizes a lack of power and
activates emergency operation with special auxiliary batteries.

A blend of design and modern
technology of illumination.
The exclusive incorporated flashing
light with a lighted LED diffuser
needs no special maintenance and
ensures complete visibility of the
warning light.

> Keep speed in check
For total service, the 24V electronics enables the operating speed to be adjusted depending
on whether the situation requires faster or slower openings and closings.
> Intensive traffic
The low-voltage motor ensures operation of the barrier for intensive traffic conditions,
such as streets, parking areas and other areas entailing constant, intensive operation.
> Rapid transit
The 24V technology regulates the barrier opening time between 8 and 4 seconds.

Round tubular bar.
For maximum reduction of the sail
effect ensuring correct functioning
even in areas subject to high winds.

The protective guard on the
bar is a standard feature.
Protects the user from possible risk
when the bar is in rotation.

Command electronics.
Protected by a die-cast aluminium
guard, it is positioned to make
any type of intervention extremely
practical.

Perfectly integrable.
The safety photocells are applied
directly onto the bar and integrate
harmoniously and aesthetically with
the system.

Also available as
a set or with
synchronous action
Thanks to the additional
RSE card the barriers
can be installed
facing each other or
be synchronised with
the “compass” function
at the same access
point.

Luminous cord.
Superior visibility of the arm and maximum durability of the light fixtures.

Differentiated sensitivity spring.
For exceptional balancing of the bar.

Global entry control
The Gard series automatic barrier system can be connected to many of the Came access
control systems that allow identification, memorization, and entry and exit only to authorized
personnel. The equipment can also be integrated with a global access control system for
specific departments in a company or the services offered by a collective structure and
apartment blocks.



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1.1-111
About                           : 852863b5-0c22-11db-9733-c50daaad8064
Create Date                     : 2007:06:15 10:23:37+02:00
Metadata Date                   : 2007:06:15 10:23:50+02:00
Modify Date                     : 2007:06:15 10:23:50+02:00
Creator Tool                    : Adobe InDesign CS2 (4.0)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 9473 bytes, use -b option to extract)
Instance ID                     : uuid:beae4bbe-1b19-11dc-adc6-0014516321f9
Document ID                     : adobe:docid:indd:3f91f108-16b1-11dc-9300-989a5a3c8472
Rendition Class                 : proof:pdf
Derived From Instance ID        : 3f91f107-16b1-11dc-9300-989a5a3c8472
Derived From Document ID        : adobe:docid:indd:36ecf01e-1437-11dc-88f4-9d8085107fe5
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 400.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00
Manifest Placed Y Resolution    : 72.00, 400.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 300.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Document ID  : adobe:docid:photoshop:d6506cfe-f69f-11d9-8d3e-dac9b0b067d4, adobe:docid:photoshop:26bbbdd8-e96d-11d9-99f3-d6f66d1f0cde, uuid:2DB7084CAF5211DAB285D9602B8AD475, uuid:4C1041F7C32211DB927A844D168A54ED, uuid:12210289141E11DC85CAB0FBAA6C7E07, adobe:docid:photoshop:d6506cfe-f69f-11d9-8d3e-dac9b0b067d4, adobe:docid:photoshop:27d858f6-3ed8-11d9-914e-ab850de8eb8a, adobe:docid:photoshop:0c76bef3-ff53-11d9-83d5-d1caa2f28037, adobe:docid:photoshop:175a1953-f6a5-11d9-8d3e-dac9b0b067d4, adobe:docid:photoshop:3ab6a002-4475-11d9-a731-87d0b42d6716, adobe:docid:photoshop:da1b7b0d-f602-11d9-8802-d4f873166ae7, uuid:6A748E7FD08011DAB90ADFE7D744F8E5, uuid:FB87B806772611DB9C9099C556223754
Manifest Reference Instance ID  : uuid:6674fc9c-142d-11dc-9fb5-0014516321f9, uuid:4C1041F8C32211DB927A844D168A54ED, uuid:1221028A141E11DC85CAB0FBAA6C7E07, uuid:28726CDB631211DA9AADBA59815A3A15, uuid:6A748E80D08011DAB90ADFE7D744F8E5, uuid:FB87B807772611DB9C9099C556223754
Format                          : application/pdf
Producer                        : Adobe PDF Library 7.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS2 (4.0)
EXIF Metadata provided by EXIF.tools

Navigation menu