HXR NX5M NX5
User Manual: HXR-NX5M
Open the PDF directly: View PDF 
.
Page Count: 19
| Download | |
| Open PDF In Browser | View PDF |
985273712.pdf
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
RMT-845
SERVICE MANUAL
US Model
Canadian Model
AEP Model
E Model
Chinese Model
Japanese Model
Ver. 1.1 2010.01
Revised-1
Revision History
Ver.
Date
1.0
2010.01
Official Release
1.1
2010.01
Revised-1
(A1 09-396)
Replace the previously issued
SERVICE MANUAL 9-852-737-11
with this Manual.
History
Contents
S.M. Rev.
issued
—
—
• Correction of SERVICE NOTE
Page 1-2, 1-4
• Correction of EXPLODED VIEWS
Page 2-3, 2-4, 2-6, 2-7, 2-10, 2-12, 2-13, 2-14
• Correction of SUPPLIED ACCESSORIES
Page 2-18
• Correction of ELECTRICAL PARTS LIST
Page 2-19, 2-20, 2-30
• Correction of BLOCK DIAGRAMS
Page 4-2,4-5, 4-7, 4-8, 4-11
• Correction of FRAME SCHEMATIC DIAGRAMS
Page 5-1, 5-2
• Correction of SCHEMATIC DIAGRAMS
Page 6-32, 6-40, 6-44, 6-49
• Correction of PRINTED WIRING BOARDS
Page 6-68, 6-69
Yes
Photo: HXR-NX5U
SERVICE NOTE (Check the following note before the service.)
1-1. POWER SUPPLY DURING REPAIRS
1-2. PRECAUTION ON REPLACING THE VC-582 BOARD
1-3. SELF-DIAGNOSIS FUNCTION
1-4. GPS RECEIVING CHECK(NX5E/NX5J/NX5N/NX5P/NX5U)
1-5. PRECAUTION ON REPLACING THE GY-022 BOARD
• Regarding the Adjustment, refer to SERVICE MANUAL 9-852-737-5 .
Digital HD Video Camera Recorder
The components identified by mark
0 or dotted line with mark 0 are
critical for safety.
Replace only with part number
specified.
Les composants identifiés par une
marque 0 sont critiques pour la
sécurité.
Ne les remplacer que par une
pièce portant le numéro spécifié.
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
9-852-737-12
Sony EMCS Co.
2010A0800-1
© 2010.1
Published by Tokai TEC
2. REPAIR PARTS LIST
IDENTIFYING PARTS
(ENGLISH)
NOTE:
• -XX, -X mean standardized parts, so they may have some differences from the original
one.
• Items marked “*” are not stocked since they are seldom required for routine service.
Some delay should be anticipated when ordering these items.
• The mechanical parts with no reference number in the exploded views are not supplied.
• Due to standardization, replacements in the parts list may be different from the parts
specified in the diagrams or the components used on the set.
• CAPACITORS:
uF: μF
• COILS
uH: μH
• RESISTORS
All resistors are in ohms.
METAL: metal-film resistor
METAL OXIDE: Metal Oxide-film resistor
F: nonflammable
• SEMICONDUCTORS
In each case, u: μ, for example:
uA...: μA... , uPA... , μPA... ,
uPB... , μPB... , μPC... , μPC... ,
uPD..., μPD...
Follow the disassembly in the numerical order given.
5 Handle Section
[Disassembly]
[Exploded View]
• EVF Section
• Handle Section- 1
• VF-179 Board
• GP940 Assy (GP-028 Board)
(Except HXR-NX5M/HXR-NX5C) • FP-776 Flexible Board
• FP-1160 Flexible Board
• Handle Section- 2
• LCD Section
• KY-115 Board
• HT-003 Board
• PI-030 Board
• PD-395 Board
• FP-1150 Flexible Board
• Microphone Section
• FP-1157 Flexible Board
• MA-459 Board
• Handle Section- 3
• FP-1158 Flexible Board
• HG-001 Board
• HP-156 Board
• XL-011 Board
• FP-1152 Flexible Board
• Handle Section- 4
7 BT Panel Section
[Disassembly]
[Exploded View]
• CP-004 Board
• JK-392 Board
• MS-424 Board
• FP-1149 Flexible Board
• FP-1155 Flexible Board
• FP-1162 Flexible Board
(JAPANESE)
2 VC-582 Board
VC
-58
2
8 Main Chassis
1 Cabinet (L) Section
[Disassembly]
[Exploded View]
• Cabinet (L) Section- 1 • Cabinet (L) Section- 2
• AS-063 Board
• TC-001 Board
• GC-012 Board
• TS-157 Board
• GS-010 Board
(Except HXR-NX5M/HXR-NX5C)
• FP-1151 Flexible Board
• FP-1156 Flexible Board
• FP-1161 Flexible Board
• Abbreviation
CH : Chinese model
CND : Canadian model
J
: Japanese model
6 Lens Section
[Disassembly]
[Exploded View]
• GY-022 Board
• Prism Device
(including CM-097/CM-104 Board)
The components identified by mark 0
or dotted line with mark 0 are critical for
safety.
Replace only with part number specified.
Les composants identifiés par une marque
0 sont critiques pour la sécurité.
Ne les remplacer que par une pièce portant
le numéro spécifié.
お願い
図面番号で部品を指定するときは基板名
又はブロックを併せて指定してください。
【使用上の注意】
• ここに記載されている部品は, 補修用部品であるため, 回路図及び
セットに付いている部品と異なる場合があります。
• -XX, -Xは標準化部品のため, セットに付いている部品と異なる場合
があります。
• *印の部品は常備在庫しておりません。
• コンデンサの単位でuFはμFを示します。
• 抵抗の単位Ωは省略してあります。
金
被：金属被膜抵抗。
サンキン：酸化金属被膜抵抗。
• インダクタの単位でuHはμHを示します。
• 半導体の名称でuA..., uPA..., uPB..., uPC..., uPD...等はそれぞれ
μA..., μPA..., μPB..., μPC..., μPD...を示します。
4 Cabinet (R) Section
[Disassembly]
[Exploded View]
• CK-218 Board
• FP-1159 Flexible Board
3 Main Frame
When indicating parts by reference
number,please include the board name.
0印の部品，または0印付の点線で囲ま
れた部品は，安全性を維持するために，
重要な部品です。
従って交換時は，必ず指定の部品を使用
してください。
View Position
Top View
Right View
Back View
Left View
Front View
Bottom View
Link
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
AC-ACCESSORIES
DIS-ASSEMBLY
2-1
– ENGLISH –
– JAPANESE –
NOTE FOR REPAIR
修理時の注意
• Make sure that the flat cable and flexible board are not cracked
of bent at the terminal.
Do not insert the cable insufficiently nor crookedly.
• When remove a connector, don’t pull at wire of connector. It is
possible that a wire is snapped.
• フラットケーブルおよびフレキシブル基板の端子面に欠け，
折れ等がないことを確認する。
また，コネクタへの接続は，差し込み不足や斜め差しになら
ないように注意する。
Cut and remove the part of gilt
which comes off at the point.
(Be careful or some
pieces of gilt may be left inside)
先端の剥がれたメッキ部はカットして
除去してください。
（メッキ破片がコネクタ内に残っている
場合もあるので注意してください）
• コネクタを取り外す時に，線材部（極細）を持って引っ張ると
断線する恐れがありますので，絶対に線材部（極細）を持って
引っ張らないでください。
• When installing a connector, don’t press down at wire of connector.
It is possible that a wire is snapped.
• 線材部（極細）を押さえながらコネクタを差し込むと，線材部
（極細）が断線する恐れがありますので，絶対に線材部（極細）
には負担をかけないでください。
• Do not apply excessive load to the gilded flexible board.
• 金メッキされているフレキシブル基板には，強い負担をかけ
ないでください。
NOTE FOR DISCONNECTING THE HARNESS (COAXIAL CABLE)
ハーネス
（同軸ケーブル）
の交換について
When disconnecting the harness (COAX IAL CABL E ), do not
pull the harness part but pull off the connector body with tweezers
etc.
ハーネス(同軸ケーブル)を引き抜く際は、ハーネス部を引かず、
ピンセット等でコネクタ部を引いてください。
ハーネス
(同軸ケーブル)
Harness
(coaxial cable)
ピンセット等
Tweezers etc.
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
2-2
Ver. 1.1 2010.01
The changed portions from
Ver. 1.0 are shown in blue.
2-1. EXPLODED VIEWS
DISASSEMBLY
2-1-1. OVERALL SECTION
1. Remove to numerical order 1 (1-1 to 1-3) in the left figure.
2. The meaning of the sign in left figure is as follows. Be careful when it removes.
◆-X: Flexible Board, Flat Cable, Harness
ns: not supplied
1 Release button (1-1) → EXT Dummy Cover (1-2) → #49 X 3 → Grip Cover Assy (1-3)
Bottom View
#49
Main Board Section
(See page 2-4)
→ Flexible Board → #49 X 8
1 Cabinet (L) Section-1
(See page 2-6)
Bottom View
#49
Bottom View
#49
1
1-2
-1
1-1
Left View
Top View
-1
#49
#49
#49
#49
Screw
ns
2
1-3
#49: M2.0 X 4.0
(Black)
2-630-005-31
3
#49
2.0
#49
4.0
Ref. No.
Part No.
Description
1
2
3
4-165-238-01
X-2515-789-1
2-178-805-01
COVER, EXT DUMMY
COVER ASSY, GRIP
FOOT, RUBBER
#49
2-630-005-31
SCREW (M2), NEW TRUSTER, P2
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
2-3
Ver. 1.1 2010.01
The changed portions from
Ver. 1.0 are shown in blue.
2-1-2. MAIN BOARD SECTION
DISASSEMBLY
1. Remove to numerical order (2 to 4) in the left figure.
2. The meaning of the sign in left figure is as follows. Be careful when it removes.
◆-X: Flexible Board, Flat Cable, Harness
2 #50 X 4
3 #49 X 6
Left View
Left View
#50
#49
Bottom View
#49
4 Cabinet (R) Section
(Note 2)
(See page 2-8)
VC-582
#49
57
#49
4
Chassis Section
(See page 2-5)
4 Open Lid AL (4)
→ #49 X 6
→ #154 X 1
Right View
Back View
Bottom View
#49
J
#49
#49
#49
Left View
#154
3 56
E
A
E
B
E
C
2 54
E
D
N
M
(Note 1)
E
E
F
L
A
B
K
C
#50
#49
D
N
E
VC
I
F
-58
M
Screw
H
2
G
55
#50
#49: M2.0 X 4.0
(Black)
2-630-005-31
#49
53
L
52
#154: M2.6 X 8.0
(Silver)
7-627-556-97
#50: M2.0 X 3.0
(Red)
2-891-494-11
#154
K
J
2.0
G
2.6
2.0
I
#50
H
4.0
3.0
8.0
51
Note
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
* 51
* 52
* 53
54
* 55
4-165-223-01
4-170-751-01
4-165-995-01
A-1758-578-A
4-166-044-01
SHEET (4535T1), RADIATION
SPACER (A), VC
LABEL, FUSE
VC-582 BOARD, COMPLETE (SERVICE) (Note 1)
SPACER (B), VC
* 56
* 57
4-165-252-01
4-175-181-01
FRAME, MAIN
SHEET (FP1152), WATERPROOF
2-630-005-31
2-891-494-11
7-627-556-97
SCREW (M2), NEW TRUSTER, P2
SCREW (M2), NEW TRUSTER, P2
SCREW, PRECISION +P2.6X8 TYPE 1
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
#49
#50
#154
2-4
Note 1: Refer to “Assembly-8: How to arrange Harness (Coaxial
Cable)” when installing.
Note 1: 組立時は Assembly-8: How to arrange Harness (Coaxial
Cable) を参照してください。
Note 2: Refer to “Assembly-7: On installation of the Cabinet (R)
section, adjust the position of the ND filter switch” when
installing.
Note 2: 組立時は Assembly-7: On installation of the Cabinet (R)
section, adjust the position of the ND filter switch を参
照してください。
2-1-3. CHASSIS SECTION
DISASSEMBLY
1. Remove to numerical order (5 to 8) in the left figure.
2. The meaning of the sign in left figure is as follows. Be careful when it removes.
5 #119 X 4
6 #119 X 4
Left View
#119
Top View
#119
5 Handle Section-1
#119
(See page 2-9)
#119
7 #49 X 5
Back View
Right View
#49
#49
#49
#49
105
Screw
#49
104
6 Lens Section
103
(See page 2-16)
2.0
4.0
7 BT Panel Section
(See page 2-17)
8 102
#119
101
#119
Ref. No.
Part No.
Description
101
* 102
103
* 104
105
4-119-234-11
4-165-251-01
4-119-237-01
4-165-225-01
4-165-224-01
WASHER, TRIPOD
CHASSIS, MAIN
PLATE (F), MC FIXED
SHEET (3218T1), RADIATION
SHEET (6018T1), RADIATION
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
Ref. No.
#49
#119
#119: M2.6 X 5.0
(Black)
7-627-556-58
#49: M2.0 X 4.0
(Black)
2-630-005-31
Part No.
Description
2-630-005-31
7-627-556-58
SCREW (M2), NEW TRUSTER, P2
SCREW +P 2.6X5
2-5
2.6
5.0
Ver. 1.1 2010.01
The changed portions from
Ver. 1.0 are shown in blue.
2-1-4. CABINET (L) SECTION-1
Screw
ns: not supplied
#49: M2.0 X 4.0
(Black)
2-630-005-31
Cabinet (L) Section-2
(See page 2-7)
2.0
160
4.0
Caution :
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
Dispose of used batteries according to the instructions.
162
#50
159
156
#53
164
#49
#53
#53
#49
A
165
166
163
#50
Except
HXR-NX5M/
HXR-NX5C
155
#53
#53
154
#53
#53
#53
ns
#53
A
153
ns
#53
: BT2001 (LITHIUM STORAGE BATTERY)
Board on the mount position.
(See page 6-63)
#53
ns
BH2001
(Note)
151
152
BT2001
(Note)
Ref. No.
Part No.
Description
Part No.
Description
151
152
* 153
154
* 155
A-1752-113-A
1-879-860-11
4-165-326-01
1-487-447-11
4-165-331-01
GC-012 BOARD, COMPLETE
FP-1161 FLEXIBLE BOARD
FRAME, PS
SWITCH BLOCK, CONTROL (PS94000)
BRACKET (REAR), GRIP BELT
161
162
163
1-879-855-11
A-1752-127-A
A-1752-124-A
164
1-837-242-11
156
157
* 158
159
160
X-2515-778-1
2-178-804-01
4-165-330-01
1-487-448-11
X-2515-779-1
165
A-1752-135-A
160
X-2515-788-1
CABINET (G (94000)) ASSY
BELT, GRIP
HOLDER, GRIP BELT
SWITCH BLOCK, CONTROL (PZ94000)
CABINET (S (94000)) ASSY
(EXCEPT HXR-NX5M/HXR-NX5C)
CABINET (S (94003)) ASSY
(HXR-NX5M/HXR-NX5C)
FP-1156 FLEXIBLE BOARD
AS-063 BOARD, COMPLETE
GS-010 BOARD, COMPLETE
(EXCEPT HXR-NX5M/HXR-NX5C) (Note 2)
CABLE, FLEXIBLE FLAT (FFC-202)
(EXCEPT HXR-NX5M/HXR-NX5C)
FP-1151 FLEXIBLE BOARD, COMPLETE
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
3.0
2.0
5.0
Note
161
158
2.0
#53
#53
157
#53: M2.0 X 5.0 (Tapping)
(Black)
3-080-206-21
#50: M2.0 X 3.0
(Red)
2-891-494-11
Ref. No.
* 166
4-165-336-01
0 BT2001 1-756-134-12
0 BH2001 1-756-615-61
#49
#50
#53
2-630-005-31
2-891-494-11
3-080-206-21
RETAINER, EXT CONNECTOR (M)
BATTERY, STORAGE, LITHIUM (Note 1)
HOLDER, BATTERY (Note 1)
SCREW (M2), NEW TRUSTER, P2
SCREW (M2), NEW TRUSTER, P2
SCREW, TAPPING, P2
2-6
注意 :
電池の交換は，正しく行わないと破裂する恐れがあります。
電池を交換する場合には必ず同じ型名の電池又は同等品と交換
してください。
使用済み電池は，取扱指示に従って処分してください。
Note 1: Replace the battery holder (BH2001) together when
replacing the lithium storage battery (BT2001) on the
GC-012 board. (The battery holder removed once cannot
be used again.)
When mounting these parts, mount new battery holder
first and attach new lithium storage battery next.
Note 1:
GC-012基板のリチウム蓄電池（BT2001）を交換する場合はバッ
テリホルダ（BH2001）
も同時に新品に交換して下さい。
（一度使用したバッテリホルダは再使用できません。
）
部品取り付けの際は，先にバッテリホルダを取り付けてからリ
チウム蓄電池を装着して下さい。
Note 2: Refer to “Assembly-5: On installation of the GS-010
Board, adjust the position of the switch” when installing.
Note 2: 組立時は Assembly-5: On installation of the GS-010
Board, adjust the position of the switch. を参照してく
ださい。
Ver. 1.1 2010.01
The changed portions from
Ver. 1.0 are shown in blue.
2-1-5. CABINET (L) SECTION-2
Screw
ns: not supplied
#34: M3.0 X 8.0
(Black)
3-077-331-41
2.0
3.0
8.0
#53: M2.0 X 5.0 (Tapping)
(Black)
3-080-206-21
#50: M2.0 X 3.0
(Red)
2-891-494-11
3.0
2.0
5.0
201
Note
ns
Note :
#53
202
#53
203
206
#50
208
(Note)
#53
#53
205
204
207
#34
209
#53
210
211
Ref. No.
Part No.
Description
201
X-2515-776-1
201
X-2515-787-1
202
* 203
* 204
205
2-178-805-01
4-165-334-01
4-165-327-01
1-837-240-11
CABINET (L (94000)) ASSY
(EXCEPT HXR-NX5M/HXR-NX5C)
CABINET (L (94003)) ASSY
(HXR-NX5M/HXR-NX5C)
FOOT, RUBBER
HEAT SINK, L
BRACKET (FRONT), GRIP BELT
CABLE, FLEXIBLE FLAT (FFC-194)
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
Ref. No.
Part No.
Description
206
207
208
209
210
1-837-242-11
A-1752-121-A
A-1752-126-A
4-165-237-01
X-2515-777-1
CABLE, FLEXIBLE FLAT (FFC-202)
TC-001 BOARD, COMPLETE
TS-157 BOARD, COMPLETE (Note)
FRAME, TC
CABINET (TC) ASSY
211
4-165-240-01
COVER, TC
#34
#50
#53
3-077-331-41
2-891-494-11
3-080-206-21
+BV3 (3-CR)
SCREW (M2), NEW TRUSTER, P2
SCREW, TAPPING, P2
2-7
Refer to “Assembly-6: On installation of the TS-157
Board, adjust the position of the switch” when installing.
Note :
組立時は Assembly-6: On installation of the TS-157
Board, adjust the position of the switch. を参照してく
ださい。
2-1-6. CABINET (R) SECTION
Screw
ns: not supplied
#53: M2.0 X 5.0 (Tapping)
(Black)
3-080-206-21
#50: M2.0 X 3.0
(Red)
2-891-494-11
2.0
3.0
256
258
ns
ns
257
ns
ns
ns
255
ns
#53
#53
#53
261
#53
#53
A
260
#50
252
259
A
254
251
#53
#53
Ref. No.
251
252
253
254
255
253
ns
Part No.
Description
1-879-858-11
A-1752-112-A
1-487-451-11
1-487-449-11
1-487-450-11
FP-1159 FLEXIBLE BOARD
CK-218 BOARD, COMPLETE
SWITCH BLOCK, CONTROL (CF94000)
SWITCH BLOCK, CONTROL (KP94000)
SWITCH BLOCK, CONTROL (AU94000)
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
Ref. No.
Part No.
Description
256
X-2515-775-1
256
X-2515-786-1
257
258
* 259
* 260
* 261
X-2546-696-1
X-2546-465-1
4-165-325-01
4-119-383-01
4-165-313-01
CABINET (R (94000)) ASSY
(EXCEPT HXR-NX5M/HXR-NX5C)
CABINET (R (94003)) ASSY
(HXR-NX5M/HXR-NX5C)
LID SUB ASSY (94000), AL (SERVICE)
LID SUB ASSY (94000), MS (SERVICE)
SHEET, RUBBER
PLATE, CABINET (R) FIXED
BASE, AL
#50
#53
2-891-494-11
3-080-206-21
SCREW (M2), NEW TRUSTER, P2
SCREW, TAPPING, P2
2-8
2.0
5.0
2-1-7. HANDLE SECTION-1
DISASSEMBLY
ns: not supplied
1. The meaning of the sign in left figure is as follows. Be careful when it removes.
◆-X: Flexible Board, Flat Cable, Harness
307
Screw
#49
EVF section
(See page 2-13)
#49: M2.0 X 4.0
(Black)
2-630-005-31
#49
#49
#53: M2.0 X 5.0 (Tapping)
(Black)
3-080-206-21
#50: M2.0 X 3.0
(Red)
2-891-494-11
2.0
2.0
#119: M2.6 X 5.0
(Black)
7-627-556-58
2.6
2.0
#49
4.0
306
#49
#50
308
302
311
310
#49
309
Except
HXR-NX5M/
HXR-NX5C
303
#119
303
304
Handle section-2
(See page 2-10)
ns
305
301
ns
Ref. No.
#53
Part No.
Description
301
302
303
304
305
X-2342-570-1
3-284-080-01
3-284-081-01
3-284-075-02
4-119-861-01
HOLDER (93000) ASSY, MICROPHONE
RUBBER, MICROPHONE
SHEET, RUBBER ADHESIVE
COVER, MICROPHONE HOLDER RUBBER
RUBBER (93000), HOLDER
306
307
308
309
310
X-2515-770-1
X-2515-769-1
3-288-538-01
A-1753-082-A
1-837-242-11
COVER (94000) ASSY, (REAR)
CABINET (94000) ASSY, (UPPER)
SHOE, REAR (COLD)
GP940 ASSY (EXCEPT HXR-NX5M/HXR-NX5C)
CABLE, FLEXIBLE FLAT (FFC-202)
(EXCEPT HXR-NX5M/HXR-NX5C)
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
Ref. No.
Part No.
Description
311
1-480-298-11
SWITCH BLOCK, CONTROL (GZ92000)
#49
#50
#53
#119
2-630-005-31
2-891-494-11
3-080-206-21
7-627-556-58
SCREW (M2), NEW TRUSTER, P2
SCREW (M2), NEW TRUSTER, P2
SCREW, TAPPING, P2
SCREW +P 2.6X5
2-9
3.0
5.0
5.0
Ver. 1.1 2010.01
The changed portions from
Ver. 1.0 are shown in blue.
2-1-8. HANDLE SECTION-2
Screw
#49: M2.0 X 4.0
(Black)
2-630-005-31
#53: M2.0 X 5.0 (Tapping)
(Black)
3-080-206-21
#50: M2.0 X 3.0
(Red)
2-891-494-11
#119: M2.6 X 5.0
(Black)
7-627-556-58
#100: M2.0 X 6.0
(Black)
3-080-203-51
351
#100
2.0
2.0
2.6
2.0
2.0
#100
4.0
3.0
5.0
6.0
5.0
359
Note
352
K
Y11
5
Note :
#50
#50
354
358
353
357
(Note)
#53
Handle section-3
(See page 2-11)
356
355
#50
(Note)
(Note)
I-
P
0
3
0
#119
LCD section
(See page 2-14)
362
361
360
#49
363
#49
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
351
352
353
* 354
355
X-2515-767-1
A-1752-116-A
1-837-240-11
4-165-283-01
A-1752-129-A
PANEL (94000) ASSY, CONTROL
KY-115 BOARD, COMPLETE
CABLE, FLEXIBLE FLAT (FFC-194)
COVER (BB)
PI-030 BOARD, COMPLETE (Note)
361
362
* 363
1-879-856-12
4-169-934-01
4-174-174-01
FP-1157 FLEXIBLE BOARD
SHEET (FP1157), COUNTERMEASURE
CUSHION, HANDLE (FRONT) CABINET
356
357
358
359
360
4-119-279-01
A-1752-134-A
X-2188-609-1
X-2515-768-1
4-165-281-01
HOLDER, FLEXIBLE (Note)
FP-1150 FLEXIBLE BOARD, COMPLETE (Note)
FIXED (759) ASSY
COVER (94000) ASSY, (FRONT)
CABINET, HANDLE (FRONT)
2-630-005-31
2-891-494-11
3-080-206-21
3-080-203-51
7-627-556-58
SCREW (M2), NEW TRUSTER, P2
SCREW (M2), NEW TRUSTER, P2
SCREW, TAPPING, P2
SREW (M2), LOCK ACE, P2
SCREW +P 2.6X5
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
#49
#50
#53
#100
#119
2-10
Refer to “Assembly-4: How to arrange Harnesses and
Flexible Board” when installing.
Note :
組立時は Assembly-4: How to arrange Harnesses and
Flexible Board を参照してください。
2-1-9. HANDLE SECTION-3
Screw
ns: not supplied
#49: M2.0 X 4.0
(Black)
2-630-005-31
403
#119: M2.6 X 5.0
(Black)
7-627-556-58
#50: M2.0 X 3.0
(Red)
2-891-494-11
#50
2.0
401
#50
4.0
404
ns
#49 #49
405
#49
406
402
Handle section-4
(See page 2-12)
ns
414
#50
ns
#49
407
#49
408
#49
409
410
413
411
#50
#119
#49
Ref. No.
Part No.
Description
401
402
403
404
405
A-1752-136-A
A-1752-114-A
A-1752-123-A
4-165-284-01
3-061-234-01
FP-1152 FLEXIBLE BOARD, COMPLETE
HP-156 BOARD, COMPLETE
HG-001 BOARD, COMPLETE
COVER, HP JACK
NUT (M6X0.5)
406
407
408
* 409
410
X-2188-599-1
1-834-244-11
A-1752-130-A
4-165-279-01
3-288-474-01
KNOB ASSY, ZOOM SELECTION
FLEXIBLE FLAT CABLE (FFC-116)
XL-011 BOARD, COMPLETE
BRACKET, XL
RUBBER, PANEL RETAINER
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
412
Ref. No.
Part No.
Description
411
412
413
414
4-165-282-01
4-165-285-01
2-892-095-01
1-480-870-11
COVER, XLR
COVER, XLR RUBBER
CLAMP, CABLE
SWITCH BLOCK, CONTROL (XS93000)
#49
#50
#119
2-630-005-31
2-891-494-11
7-627-556-58
SCREW (M2), NEW TRUSTER, P2
SCREW (M2), NEW TRUSTER, P2
SCREW +P 2.6X5
2-11
2.0
3.0
2.6
5.0
Ver. 1.1 2010.01
The changed portions from
Ver. 1.0 are shown in blue.
2-1-10. HANDLE SECTION-4
Screw
ns: not supplied
#53: M2.0 X 5.0 (Tapping)
(Black)
3-080-206-21
#49: M2.0 X 4.0
(Black)
2-630-005-31
2.0
4.0
#100: M2.0 X 6.0
(Black)
3-080-203-51
2.0
2.0
5.0
6.0
Note
Note:
#49
#53
ns
454
453
SP901
ns
#100
455
456
#49
451
#49
452
Microphone section
(See page 2-15)
457
(Note)
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
451
452
453
* 454
455
4-165-278-01
4-165-224-01
4-165-277-01
4-119-285-01
2-178-550-01
GRIP
SHEET (6018T1), RADIATION
HANDLE
CUSHION, SPEAKER
HOLDER, SPEAKER
456
* 457
3-069-286-03
2-178-566-01
SHOE, ACCESSORY
GRILLE, SPEAKER (Note)
SP901
1-825-968-11
LOUDSPEAKER (1.8CM)
#49
#53
#100
2-630-005-31
3-080-206-21
3-080-203-51
SCREW (M2), NEW TRUSTER, P2
SCREW, TAPPING, P2
SREW (M2), LOCK ACE, P2
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
2-12
Refer to “Assembly-3: How to bent the Speaker Grille”
when installing.
Note:
組立時は Assembly-3: How to bent the Speaker Grille
を参照してください。
Ver. 1.1 2010.01
The changed portions from
Ver. 1.0 are shown in blue.
2-1-11. EVF SECTION
Screw
#53: M2.0 X 5.0 (Tapping)
(Black)
3-080-206-21
501
2.0
5.0
502
503
Note
(Note)
504
505
506
#53
507
LCD902
508
#53
515
511
514
509
516
510
513
(16mm × 6.4mm)
#53
512
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
501
502
503
504
505
4-119-301-01
X-2320-885-1
X-2320-861-1
4-119-302-01
4-119-303-01
EYE CUP (SMALL)
EYE CUP (93000) ASSY
LENS ASSY, VF (Note)
LID, EYE CUP CABINET
COVER, EYE CUP CABINET LID
* 511
512
513
514
* 515
3-299-948-01
1-879-859-11
CAUTION
X-2515-771-1
4-165-332-01
SHEET (UU)
FP-1160 FLEXIBLE BOARD
TAPE, VF
CABINET (94000) ASSY, VF
RETAINER, VF FLEXIBLE
506
507
508
509
510
3-288-591-01
3-288-585-01
1-873-733-11
3-288-586-01
A-1752-131-A
SHEET, VF PROTECTION
CASE, PANEL
FP-776 FLEXIBLE BOARD
LID, PANEL
VF-179 BOARD, COMPLETE
516
X-2515-764-1
TILT ASSY, VF
LCD902 1-802-560-31
LCD MODULE
#53
SCREW, TAPPING, P2
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
3-080-206-21
2-13
Caution :
For the part of 513, cut NON WOVEN (T0.25) (3-076-631-01) into
the desired length and use it.
Caution:
513番は，ヒメロン T0.25 (3-076-631-01)を切って使用。
Note:
Note:
Refer to “Assembly-1: Confirm the Diopter Adjustment
Lever is on the left side when installing the VF Lens Assy”
when installing.
組立時は Assembly-1: Confirm the Diopter Adjustment
Lever is on the left side when installing the VF Lens
Assy を参照してください。
Ver. 1.1 2010.01
The changed portions from
Ver. 1.0 are shown in blue.
2-1-12. LCD SECTION
DISASSEMBLY
ns: not supplied
1. { points in left figure shows claws. Be careful when it removes.
Claw
556
557
Screw
#49: M2.0 X 4.0
(Black)
2-630-005-31
#49
#50: M2.0 X 3.0
(Red)
2-891-494-11
(Note)
2.0
#49
4.0
ns
558
559
Note
Note:
561
555
ns
554
552
LCD901
PD
-39
5
#49
D901
553
Claw
ns
ns
551
Boss
Ref. No.
Part No.
Description
551
552
* 553
554
555
X-2515-773-1
A-1752-128-A
4-165-311-01
3-288-565-11
X-2515-774-1
CABINET (UPPER (94000)) ASSY
PD-395 BOARD, COMPLETE
FRAME, BL
CUSHION, PANEL
LOWER (94000) ASSY, CABINET
556
557
558
559
560
3-288-566-01
1-963-030-21
A-1752-122-A
X-2342-571-1
1-965-937-21
CABINET (T), PANEL HINGE
HARNESS (SW-116) (Note)
HT-003 BOARD, COMPLETE
HINGE (TYPE 07KAI) ASSY, PANEL
HARNESS (COAXIAL CABLE)
3.0
560
ns
#50
2.0
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
Ref. No.
561
Part No.
Description
3-288-567-01
CABINET (B), PANEL HINGE
D901
1-480-358-11
LCD901 A-1734-177-A
BLOCK, LIGHT GUIDE PLATE (3.2)
TP BLOCK ASSY (32ESHGU09)
#49
#50
SCREW (M2), NEW TRUSTER, P2
SCREW (M2), NEW TRUSTER, P2
2-630-005-31
2-891-494-11
2-14
Refer to “Assembly-2: How to arrange Harnesses
(SW-116)” when installing.
Note:
組立時は Assembly-2: How to arrange Harnesses
(SW-116) を参照してください。
2-1-13. MICROPHONE SECTION
Screw
#53: M2.0 X 5.0 (Tapping)
(Black)
3-080-206-21
2.0
5.0
607
606
#53
#53
604
605
603
602
9
-45
MA
MIC901
#53
#53
601
Ref. No.
Part No.
Description
601
602
603
* 604
605
X-2515-772-1
A-1752-117-A
1-879-857-11
4-165-302-01
4-165-303-01
GRILLE (94000) ASSY, MICROPHONE
MA-459 BOARD, COMPLETE
FP-1158 FLEXIBLE BOARD
SHEET METAL, MICROPHONE
GRILLE (REAR), MICROPHONE
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
Ref. No.
Part No.
Description
606
607
4-165-304-01
4-165-301-01
SCREEN (REAR), WINDOW
CABINET (REAR), MICROPHONE
MIC901
1-542-808-11
MICROPHONE
#53
3-080-206-21
SCREW, TAPPING, P2
2-15
2-1-14. LENS SECTION
Screw
#53: M2.0 X 5.0 (Tapping)
(Black)
3-080-206-21
#155: M1.7 X 6.0 (Tapping)
(Black)
3-080-204-31
1.7
2.0
5.0
6.0
Note
653
661
#53
Note1:
Refer to page 2-2 “Note for disconnecting the harness
(coaxial cable)” when changing the harness (coaxial
cable).
Note1:
ハーネス（同軸ケーブル）の交換時は2-2ページの Note
for disconnecting the harness (coaxial cable) を参照し
てください。
Note2:
Be sure to read “Precuations for Replacement of
Imager”on page 6-1 when changing the imager.
Note2:
イメージャの交換時は6-1ページの イメージャ交換時
の注意 を必ずお読みください。
658
658
655
#53
(including IC3001/IC5001 (CMOS imager)
and CM-097/104 complete boards) (Note 2)
657
660
654
#155
(Note 3)
Note 3: Prism Device cautions
Tighten screws in the following order.
#53
653
1
3
652
2
659
Be sure not to insert the harnesses forcefully.
(Standard: Insertion; 15N, Pull out; 10N)
Note 3: プリズムデバイス取り外し組立時の注意
下記の順番でねじを締め付けてください。
1
656
651
(Note 1)
3
2
ハーネスを強く差し込まないでください。
(差し込み時：15N, 引き抜き時：10N)
Ref. No.
Part No.
Description
Ref. No.
Part No.
Description
651
* 652
653
* 654
655
1-788-775-31
4-119-361-01
4-119-362-01
4-119-360-01
A-1566-526-A
LENS, VIDEO CF0022
HEAT SINK, LENS
SHEET (2828), LENS RADIATION
SHEET, CM RADIATION
DEVICE (SERVICE), PRISM
(including IC3001/IC5001 (CMOS imager) and
CM-097/104 complete boards) (Note 2)
656
* 657
658
* 659
* 660
1-966-281-11
4-119-357-01
4-119-356-01
4-119-358-01
4-119-359-01
HARNESS (COAXIAL CABLE) (Note 1)
COVER (A), LIGHT INTERCEPTION
SHEET (1122), LENS RADIATION
COVER (B), LIGHT INTERCEPTION
PLATE, GY GROUND
661
A-1759-066-A
GY-022 BOARD, COMPLETE (SERVICE)
#53
#155
3-080-206-21
3-080-204-31
SCREW, TAPPING, P2
SCREW, TAPPING, P2 (Note 3)
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
2-16
2-1-15. BT PANEL SECTION
Screw
ns: not supplied
#34: M3.0 X 8.0
(Black)
3-077-331-41
#2: M1.7 X 4.0
(Black)
2-635-562-31
1.7
701
4.0
#49: M2.0 X 4.0
(Black)
2-630-005-31
2.0
3.0
8.0
#53: M2.0 X 5.0 (Tapping)
(Black)
3-080-206-21
#50: M2.0 X 3.0
(Red)
2-891-494-11
4.0
2.0
3.0
2.0
5.0
ns
#34
Note
#2
713
710
Note:
712
#53
MS
703
702
#49
-42
#53
4
#53
#49
714
711
#53
#53
#53
ns
ns
704
BT901
#53
ns
#50
707
#53
706
709
#53
705
708
(Note)
Ref. No.
Part No.
Description
701
702
703
704
705
X-2515-765-1
4-165-234-01
A-1752-133-A
A-1752-099-A
1-879-883-11
PANEL (94000) ASSY, BT
COVER, SDI JACK
FP-1149 FLEXIBLE BOARD, COMPLETE
CP-004 BOARD, COMPLETE
FP-1162 FLEXIBLE BOARD
706
707
708
* 709
710
A-1752-115-A
1-837-240-11
1-836-909-11
4-165-233-01
X-2515-780-1
JK-392 BOARD, COMPLETE
CABLE, FLEXIBLE FLAT (FFC-194)
CABLE ASSY, COAXIAL (Note)
HOLDER, SDI
HOLDER ASSY, BT
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
Ref. No.
ns
Part No.
Description
711
712
713
714
1-879-854-11
4-165-226-01
A-1752-120-A
4-165-269-01
FP-1155 FLEXIBLE BOARD
SHEET, MS LIGHT INTERCEPTION
MS-424 BOARD, COMPLETE
HOLDER, JACK
0 BT901
#2
#34
#49
#50
#53
1-694-411-12
2-635-562-31
3-077-331-41
2-630-005-31
2-891-494-11
3-080-206-21
TERMINAL BOARD, BATTERY
SCREW (M1.7)
+BV3 (3-CR)
SCREW (M2), NEW TRUSTER, P2
SCREW (M2), NEW TRUSTER, P2
SCREW, TAPPING, P2
2-17
Connect and Disconnect the SDI Cable vertically.
Do not load to widthwise.
Note:
SDI同軸ケーブルは垂直に抜き差ししてください。
横方向に力を加えないようにしてください。
Ver. 1.1 2010.01
The changed portions from
Ver. 1.0 are shown in blue.
• EXCEPT J MODEL
• J MODEL
Checking supplied accessories.
Note :
This item is supplied with the unit as an accessory, but is
not prepared as a service part.
Screws
2-630-005-31
Power cord (mains lead)
0 1-834-484-31 (NX5U)
0 1-832-121-31 (NX5C)
0 1-834-482-21 (NX5N/NX5E/NX5M/NX5P)
AC Adaptor/Charger
(AC-VL1)
0 1-487-539-11
コンポーネントビデオケーブル
1-829-414-61
ワイヤレスリモコン
(RMT-845)
1-487-540-11
Accessory Shoe
3-069-286-03
A/V接続ケーブル
1-828-145-21
接続コード
(DK-415)
1-782-361-15
Connecting Cord (DK-415)
1-782-361-15 (EXCEPT NX5U)
1-782-361-21 (NX5U)
Accessory Shoe Plate
(not supplied)
ネジ
2-630-005-31
アクセサリーシュー
3-069-286-03
Accessory Shoe Kit
X-2188-877-2
USBケーブル
1-829-868-31
大型アイカップ
X-2342-702-1
Wireless Remote Commander
(RMT-845)
1-487-540-11
Component video cable
1-829-414-61
アクセサリーシューキット
X-2188-877-2
マイク
(供給せず)
Operating Guide
4-157-877-11 (ENGLISH) (NX5U/NX5N)
4-157-878-11 (ENGLISH) (NX5E/NX5P/NX5M)
4-157-878-21 (SIMPLIFIED CHINESE) (NX5C)
Wind Screen, Microphone
(ECM-XM1)
1-542-749-11
CD-ROM
「“Content Management
Utility”」
4-174-940-01
Operating Guide (PDF)
The CD-ROM supplied contains all of language version of the Operating
Instructions(PDF) for printing.
The printed matter is not supplied. If required,
please order it with the part number below.
CD-ROM “Manuals for
Digital HD Video
Camera Recorder”
4-162-320-01
取扱説明書
4-157-877-01 (日本語)
Microphone Spacer
* 3-179-882-01
USB cable
1-829-868-31
CD-ROM
“Content Management
Utility”
4-174-940-01
マイクスペーサー
* 3-179-882-01
ウインドスクリーン，マイク
(ECM-XM1)
1-542-749-11
Microphone
(not supplied)
Lens hood with lens cover
(CF002)
X-2320-850-1
ウインドスクリーン
3-048-481-01
Conversion (2P) Adaptor
0 1-569-008-12 (NX5N)
Rechargeable battery pack
(NP-F570)
(EXCEPT NX5U)
(Note)
Wind Screen
3-048-481-01
シューバネ
(供給せず)
A/V connecting cable
1-828-145-21
Large eyecup
X-2342-702-1
Rechargeable battery pack
(NP-F770) (NX5U)
(Note)
レンズカバー付きフード
(CF002)
X-2320-850-1
4-157-877-01 (JAPANESE)
4-157-877-11 (ENGLISH)
* 4-157-877-21 (FRENCH)
HXR-NX5C/NX5E/NX5J/NX5M/NX5N/NX5P/NX5U
*
*
*
*
4-157-878-11 (ENGLISH)
4-157-878-21 (SIMPLIFIED CHINESE)
4-157-878-31 (FRENCH)
4-157-878-41 (SPANISH)
4-157-878-51 (ITALIAN)
4-157-878-61 (GERMAN)
2-18
CD-ROM
「Manuals for Digital HD
Video Camera Recorder」
4-162-320-01
取扱説明書 (PDF)
取扱説明書(PDF)は全ての言語が付属品のCD-ROMに含まれています。
CD-ROM内の取扱説明書(PDF)につきましては印刷しての供給は対応して
おりません。
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2014:01:09 16:34:52-03:00 Creator : Adobe Acrobat Pro 9.0.0 Modify Date : 2014:01:15 18:11:22-03:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Metadata Date : 2014:01:15 18:11:22-03:00 Creator Tool : Adobe Acrobat Pro 9.0.0 Format : application/pdf Document ID : uuid:ab24271d-46eb-4d3c-b4ab-b612b329b47a Instance ID : uuid:742ec12c-f2fc-4e9d-8460-8f8e49497840 Producer : Acrobat Distiller 7.0.5 (Windows) Page Count : 19EXIF Metadata provided by EXIF.tools