ED3+ Handset Instructions A4 User

ED3plus-handset-guide ED3plus-handset-guide

User Manual: Handset User Instructions

Open the PDF directly: View PDF PDF.
Page Count: 1

DownloadED3+ Handset Instructions A4 User
Open PDF In BrowserView PDF
ED3+ HANDSET CONNECTION DIAGRAM

ENTROTEC LTD.
ED3+ TELEPHONE-INSTRUCTIONS FOR USE
ON PRIVACY
ON

Privacy Switch
Privacy on LED

CW1308
WHITE/BLUE

DR

BLUE/WHITE

VT

Door Open LED
Lock Release Button
GENERAL NOTES
The door entry phone system
is designed so that you have a
limited time to answer a call
and allow the caller access or
not. This is to save inconvenience
to other users of the system.

1) When called, the telephone will give a distinctive pulsing tone for up to 25
seconds and then stop. You have approx. 30 seconds to answer the call from
the start of the call tone. If the call is not answered within the call period, then
the system will reset to allow other visitors to make a call.

4) When you have completed the call, replace the handset to reset the system.
PRIVACY SWITCH
5) If you do not wish to be disturbed or annoyed by nuisance calls, press the
privacy switch (the Red LED will illuminate to remind you that the handset is in
privacy mode). When in this mode the call tone is muted until you reset the
switch by pressing it again. If you wish to terminate the privacy period press the
privacy switch once, the Red LED will extinguish and allow calls to be heard.

BZ 4

WHITE/GREEN

S2

S2 5

GREEN/WHITE

S1

S1 6

WHITE/BROWN

DS

DS 7

PREFERED COLOUR CODING FOR WIRING HANDSETS.

EX 8

Installer Please Note:
1. All ED3+ handsets have a latching Privacy Switch.
PL5
This should be set in the ‘Off’ position with the Red
LED extinguished to allow call tones to be heard.
2. All ED3+ handsets are fitted with a Call Tone Volume
adjustment (VOL). This maybe adjusted to suit level
required. Factory setting is full volume
3. All ED3+ handsets are now fitted with a DC blocking capacitor.
On older systems (Vertex and old RDC’s) this may make the call tone
fade. If this is the case check for no DC on BZ and if 0v fit PL5 link.
If there is a DC voltage find source and isolate before fitting link.

2) To answer the call remove the handset from the cradle and speak to the caller.
(You have approx. 2 minutes to speak to the caller and then the system will
reset).
3) To let the caller gain access, press the lock release button and this will open
the door for approximately 10 seconds.

0V 3

ORANGE/WHITE

BZ
DOOR OPEN

VT 2

WHITE/ORANGE

0V

PRIVACY

DR 1

Manufactured in the UK

4. Terminal 8 must only be connected to an Extension
Sounder, Flashing Beacon or other Aux. Equipment.
DATE:

28/11/2011

DRG.NO.

ENTROTEC LTD
Access House
5 Ashwood Court.
Oakbank
Livingston
EH53 0TL.
TEL.01506 886230
FAX.01506 886233

IMPORTANT.

WIR/SCH0111/
002/V Rev 1

DRAWN BY:
DESC.
WIRING DIAGRAM
AND COLOUR
V.A.Turner
SCHEME FOR
ED3+ HANDSETS

ALL CABLES TO BE KEPT WELL AWAY FROM HIGH VOLTAGE CABLES.
PLEASE CONSULT OUR INSTALLATION GUIDELINE SHEET OR CONTACT
OUR TECHNICAL DEPT. FOR ADVICE ON 08448586370.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Profile CMM Type                : Lino
Profile Version                 : 2.1.0
Profile Class                   : Display Device Profile
Color Space Data                : RGB
Profile Connection Space        : XYZ
Profile Date Time               : 1998:02:09 06:49:00
Profile File Signature          : acsp
Primary Platform                : Microsoft Corporation
CMM Flags                       : Not Embedded, Independent
Device Manufacturer             : IEC
Device Model                    : sRGB
Device Attributes               : Reflective, Glossy, Positive, Color
Rendering Intent                : Perceptual
Connection Space Illuminant     : 0.9642 1 0.82491
Profile Creator                 : HP
Profile ID                      : 0
Profile Copyright               : Copyright (c) 1998 Hewlett-Packard Company
Profile Description             : sRGB IEC61966-2.1
Media White Point               : 0.95045 1 1.08905
Media Black Point               : 0 0 0
Red Matrix Column               : 0.43607 0.22249 0.01392
Green Matrix Column             : 0.38515 0.71687 0.09708
Blue Matrix Column              : 0.14307 0.06061 0.7141
Device Mfg Desc                 : IEC http://www.iec.ch
Device Model Desc               : IEC 61966-2.1 Default RGB colour space - sRGB
Viewing Cond Desc               : Reference Viewing Condition in IEC61966-2.1
Viewing Cond Illuminant         : 19.6445 20.3718 16.8089
Viewing Cond Surround           : 3.92889 4.07439 3.36179
Viewing Cond Illuminant Type    : D50
Luminance                       : 76.03647 80 87.12462
Measurement Observer            : CIE 1931
Measurement Backing             : 0 0 0
Measurement Geometry            : Unknown
Measurement Flare               : 0.999%
Measurement Illuminant          : D65
Technology                      : Cathode Ray Tube Display
Red Tone Reproduction Curve     : (Binary data 2060 bytes, use -b option to extract)
Green Tone Reproduction Curve   : (Binary data 2060 bytes, use -b option to extract)
Blue Tone Reproduction Curve    : (Binary data 2060 bytes, use -b option to extract)
Page Count                      : 1
Create Date                     : 2014:12:02 09:32:40Z
Modify Date                     : 2014:12:02 09:32:40Z
Producer                        : Corel PDF Engine Version 15.2.0.661
Author                          : Vaughn Turner
Creator                         : CorelDRAW X5
Title                           : ED3+ Handset Instructions A4
EXIF Metadata provided by EXIF.tools

Navigation menu