Herz Product Guide
User Manual: Herz Product Guide
Open the PDF directly: View PDF 
.
Page Count: 180
| Download | |
| Open PDF In Browser | View PDF |
Product Range 2012/2013 Valid from 01.10.2011 HERZ Valves UK Progress House 6 Moorfield Point 6 Moorfield Road 6 Slyfield Industrial Estate 6 Guildford 6 Surrey 6 GU1 1RU Telephone: 01483 502211 Fax: 01483 502025 e-mail: sales@herzvalves.com www.herzvalves.com General General information, technical data HERZ-Thermostatic valves Documentation The maximum permissible differential pressure for all HERZThermostatic valves is 0.6 bar, with the exception of dimensions 3/4 and 1 with 0.4 bar and HERZ-TS-90-E and HERZ-TS-E with 0.2 bar. Order number Thermostatic heads and valves marked with the CENCER mark of conformity in the HERZ-Product Range have been tested according to EN 215. Brochures, standard sheets and tender data sheets are available for all HERZ-Products and product groups. Your HERZRepresentatives will be glad to supply these materials upon request. In order to reduce noise during operation the differential pressure should be determined in accordance with the “VDMA Instruction Sheet for Planning and Hydraulic Balancing of Heating Systems with Thermostatic Radiator Valves” (max. 0.2 bar). The seven-digit numbers include the former four-digit article number in bold print. The order number defines the valve to be ordered in terms of series, dimension, colour and model and is suitable for electronic data processing. You are kindly requested to use this number in your orders in order to rule out any confusion. Universal models EAN, Item HERZ-Radiator valves and threaded radiator connections of sizes 3/8 – 3/4 are universal models with special sockets, except HERZ-TS-E and HERZ-RL-1-E. They are suitable for connecting threaded pipes with a pipe thread and copper, soft steel or plastic pipes, the latter three by means of a compression union. The same applies to STRÖMAX, STRÖMAX-D, STRÖMAX-M, STRÖMAX-R 1/2. A special adapter is available for dimension 3/4. The corresponding tables show the wide variety of compression unions. Standard models HERZ-AS and radiator connections 1 and 1¼, HERZ-TS-valves 1, as well as HERZ-TS-E-valves are standard models with threaded sockets for threaded pipes. Nickel-plated and Brass Versions Unless otherwise stated, HERZ-Fittings and HERZ-Distributor connection systems are supplied with a nickel-plated surface. Pipe fittings are mainly installed in boiler houses or in riser mains. Unless otherwise stated, these valves are supplied in brass version. The European Article Number (EAN) is a thirteen-digit number featuring the country and manufacturer code – EAN 90 04174, as well as the product code and check digit. The EAN is valid for one unit or one invoicing unit and not for the sales units (Item) specified. We will be glad to send you the ean list for sales units (Item) upon request. ARA HERZ Armaturen is a licensee of the Austrian waste-recycling corporation (“Altstoff Recycling Austria Aktiengesellschaft“) registered under licence number 2102. The waste disposal charge is paid on the basis of the licensing agreement. Modifications HERZ Armaturen reserves the right to make modifications necessitated by technological progress and/or market requirements, and to supply modified products without prior notice. Images It is understood that images in the HERZ product ranges are symbolic representations and may therefore differ visually from the actual products. Technical Data for all HERZ-Fittings Maximum operating temperature TS 120 °C Maximum operating pressure PS 10 bar These values are valid unless otherwise stated in the article description. Hot water quality according Austrian Standard ÖNORM H 5195 and/or VDI-Regulation 2035. Storage temperature (not installed) – 40 °C until 60 °C. for compression unions for metal pipes. When using compression unions for copper and steel pipes, take into account the permissible temperature and pressure ratings according to EN 1254-2:1998, Table 5. for plastic pipe connections Plastic pipe connections are suitable for application classes 4 and 5 according ISO 10508 (panel heating and radiator connection) as well as for pipes made of PE-RT (DIN 4721), PE-MDX (DIN 4724), PB and PE-X (DIN 4726) as well as lastic composite tubes (ÖNORM B 5157). Operating temperature, resulting thereof: maximum 95 °C with 10 bar. It is the operators task, to regulate the operating pressure P oper and the operating temperature T oper in such a way that they are conforming to standards and that operational data of the pipe producer are respected. Any deviations from this data are specially mentioned in the technical documentation. Hand Wheel Colours Hand wheels and plastic components are white, in case of pipe fittings they are red. When colours are different, this is specially mentioned. Special colours are available upon enquiry. ISO 9001 Certification HERZ Armaturen Ges.m.b.H., 1230 Vienna, has an effective quality management system in all divisions of the business, suitable for upholding all-important trust from customers. Proof has been furnished that the requirements according to ÖNORM EN ISO 9001:2000 are fulfilled. Table of Contents HERZ-Thermostatic Heads HERZ-Design Thermostatic Heads HERZ-Design-Handwheels HERZ-Thermostats series DE LUXE HERZ-Design Thermostats with Remote Adjustment or Remote Sensor, with threaded connection M 28 x 1.5 HERZ-Thermostats with Contact Sensor HERZ-Thermostats Adapter Foreign valve Thermostats HERZ-Design Thermostatic Heads “H” with Threaded Connection M 30 x 1.5 HERZ-Thermostatic Heads “H” “DE LUXE” with Threaded Connection M 30 x 1.5 HERZ-Thermostatic Heads “H” “DE LUXE” with Remote Adjustment or Remote Sensor, with Threaded Connection M 30 x 1.5 HERZ-Thermostatic Adapter Rings “D” HERZ-Thermostatic Heads D “DE LUXE” HERZ-Design Thermostats “D” HERZ-Design Thermostats “D” with remote HERZ-Design Hand Wheel “D” Accessories and Tools for HERZ-Thermostatic Heads HERZ-Temperature controller RTC HERZ-Temperature Controller RTR HERZ-Actuating Drive Accessories for Actuators HERZ-Wireless Room Control RTF HERZ-Energy Saving Thermostatic Head HERZ-Return Temperature Limiter HERZ-Floor Heating Control Sets HERZ-Floor Fix, Floor Heating Control Set for Flush Mounting HERZ-TS-90-Thermostatic Valves Thermostatic Valves “DE LUXE” HERZ-TS-90-E-Thermostatic Valves HERZ-TS-E-Thermostatic Valves HERZ-TS-90-Thermostatic valves TS-90-kv HERZ-TS-FV Thermostatic Valve HERZ-TS-98-V Thermostatic Valves HERZ-TS-90-V Thermostatic Valves HERZ-Bi-Directional Flow Thermostatic Valves HERZ-Thermostatic Valves Special Design HERZ-TS-90-H-Thermostatic Valves HERZ-TS-98-VH-Thermostatic Valves HERZ-RL-5-Return Valves HERZ-RL-1-Return Valves HERZ-RL-1-E-Return Valves HERZ-Return Valves “DE LUXE” HERZ-DR-T-90-Radiator Control Valves HERZ-GP-Radiator Control Valves HERZ-TS-3000-Bypass Bodies for Radiators with Integrated Thermostatic Valves HERZ-Thermostatic Inserts HERZ-3000 Connection Elements “Project” HERZ-3000 Connection Elements for Radiators with Integrated Thermostatic Valves HERZ-3000 TP-bypass body for Radiator connection HERZ-RL-4-Single Shutoff Valve HERZ-Design Cover for HERZ-3000 HERZ-Double Connection Distributor for Radiators, SWITCHFIX Connection Systems HERZ-2000 Bypass Body Valve Arrangements HERZ-VTA-40-Four-Way Valves HERZ-VUA-40-Four-Way Valves HERZ-Design cover for Four-Way valves VUA HERZ-VUA-TV-Four-Way Valves HERZ-CALIS-TS-Three-Way Valve HERZ-Thermostatic Three-Way Valves and Two Port Valves HERZ-Thermostatic Control Valves HERZ-Two Port Control and Zone Valves Control Ball valves, Actuator HERZ-Keys and Tools for Thermostatic Valves HERZ-Upper Parts for Thermostatic and Control Valves 3-5 5 5 5-6 7-8 8 8 8 9-10 11 12 13 14-15 14 14 14 16 17 17, 20 18 19 21 21 22 23 23 24, 52 25-26 27 27 28-29 29 30 31 32 33 34 35 36 37 37 38 39 40 41-42 43 44 45-47 47 48 48 49 50-52 52 53 54 55-56 56 57 58 59 60-61 61 62 63 64-65, 67 1 Table of Contents HERZ-GP-Spindle Sealing Set, Spare parts HERZ-Changefix Tool for HERZ-Thermostatic Upper Parts HERZ-Three-Way Mixing and Diverting Valves, Actuator HERZ-Pump set 4500 KRAS HERZ-Three-way mixing valve actuator HERZ-Electronic Heating Controller HERZ-Safety Valves, Air Release Valve, Backflow preventer HERZ-Ball Valves HERZ-Boiler fill and drain valves, THERMOFLEX HERZ-Connect 4 HERZ-Gate Valves HERZ-Regulating valve, Combination valve, Differential Pressure Overflow Valves Differential Pressure Controller STRÖMAX-M, Double Regulating Valves Regulating Valves Double Regulating Valve Shutoff Valves HERZ-Shutoff Valve with fire Hose Connection HERZ-Ball Valves HERZ-Differential Pressure Controllers, Regulating Valves, Shutoff Valves. Flanged Version Circuit Regulating Valves, Flanged Version. Cast Iron Commissioning Set HERZ-Isolator Butterfly Valves, Flanged Version HERZ-Strainer. Flanged Version. Swing Check Valve, Wafer Check Valve HERZ-Hydraulic Interface Units and Accessories HERZ-Thermostatic mixing valves HERZ-Mixing valves HERZ-Ball Valves for Flush Mounting HERZ-Drain Valve HERZ-Circulation Temperature Controller HERZ-LEGIOFIX HERZ-Balancing Valves STRÖMAX HERZ-Shutoff valves STRÖMAX HERZ-Pressure Reducer, Backflow preventer, Ball Valves HERZ-Ball Valves, Backflow preventer, Double Check Valves Ball Valves for Gas HERZ-Insulating Nipple for Gas, Strainer for Gas HERZ-Pipe and Fittings for Gas HERZ-Strainers HERZ-Metering stations, Measuring Valves HERZ-Measuring Computer, Accessories HERZ-Accessories, Pipe Fittings, Drain Valves Pipe Fittings Insulation Shells Spare Parts for Inclined Model Spare parts for Differential Pressure and Stromax Valves Plastic Skirting Boards HERZ-Compact Distributors Press fittings Mounting Kits HERZ-Shutoff Valve for Compact Distributor Pre-assembled Control Station for Radiator Heating Control HERZ-COMPACT FLOOR HERZ-Connection System for COMPACTFLOOR HERZ-Distributor Cabinets Electrical Distribution HERZ-Spare Upper Part for Distributors Tacker, Panels for Underfloor Heating System Miscellaneous Accessories for Underfloor Heating System HERZ-Plastic Composite Pipe PIPEFIX Press fittings Connections Plastic Pipe Conections HERZ-Compression Adapters, compression adapters for DE LUXE Accessories for PIPEFIX Press 17 Fittings Tools for Press Fittings Spare Parts for Press Fittings 2 66 68 69-70 70 70 71 72 73 74 75 75-76 77 77-78 78-79 80-82 79-80 83-85 85 86 87 88 89 90 91-95 95 96 96 96 97 97 98 99-100, 103 101 102 104-108 108 109-110 111 112 113 114 114 115-118 119 120-121 122, 126-127, 131-132 123-124 125 126 127 128-130 130 133 133 134 135 136-138 139-140 141, 146-156 142-145, 161, 162 157 158-159 163 164-168 169 Heating Product 1 group HERZ-Design Thermostatic Heads with threaded connection M 28 x 1.5 suitable for HERZ-Thermostatic Valves* EAN 90 04174 Order number Item HERZ-Design Thermostatic Head With hydrosensor, set value range 6–30 °C, with “0” position, frost protection approx. 6 °C adjustable. Limitation and locking of set value range by means of stop pins 1 9551 00 (to be ordered separately). Design developed in co-operation with “Porsche Design GmbH”. 90000 6 1 9230 06 20 HERZ-Design Thermostatic Head With hydrosensor, set value range 6–28 °C, automatic frost protection at approx. 6 °C. Limitation and locking of set value range by means of stop pins 1 9551 00 (to be ordered separately). Design developed in co-operation with “Porsche Design GmbH”. 90030 3 1 9260 06 20 Model HERZ-Design Thermostatic Heads, Special Models, with threaded connection M 28 x 1.5 suitable for HERZ-Thermostatic Valves* HERZ-Design Thermostatic Head with grip ring The grip ring on the head makes accurate adjustment of the desired comfort temperature easy for the handicapped. Otherwise same as 1 9230 06. 90270 3 1 9230 59 20 HERZ-Design Thermostatic Head with grip ring The grip ring on the head makes accurate adjustment of the desired comfort temperature easy for the handicapped. Otherwise same as 1 9260 06. 90280 2 1 9260 59 20 HERZ-Thermostatic Head With hydrosensor, set value range 6–28 °C, mechanical shutoff function (“0” position), frost protecton approx. 6 °C adjustable. Limitation and locking of set value range by means of stop pins 1 9551 00 (to be ordered separately). 70120 7 1 7230 06 20 HERZ-Thermostatic Head With hydrosensor, set value range 6–28 °C, cannot be shut off mechanically, automatic frost protection at approx. 6 °C. Limitation and locking of set value range by means of stop pins 1 9551 00 (to be ordered separately). 70140 5 1 7260 06 20 91840 7 1 7262 00 1 HERZ-Thermostatic Heads with threaded connection M 28 x 1.5 suitable for HERZ-Thermostatic Valves* HERZ-High Lift Thermostatic Head Set value range 8–25 °C, with automatic frost protection at approx. 8 °C. Mounting without adapter, in connection with HERZ-Thermostatic body-TS-E increases kv-value up to 2.2 m³/h. HERZ-Thermostatic Heads “HERZCULES”, Robust Version with threaded connection M 28 x 1.5 suitable for HERZ-Thermostatic Valves* “HERZCULES”, HERZ-Thermostatic Head, Robust Version protection against vandalism, theft and unauthorised operation. With hydrosensor, set value range 8–26 °C, with automatic frost protection. Mounting and dismounting is only possible by means of tightening tool 1 9554 01 and Allen key 1 6616 00 (both to be ordered separately). Control of set value by means of unlocking tool 1 9554 00 (included), set value control is locked. In locked position, set value indicator remains concealed. “HERZCULES”, HERZ-Thermostatic Head, Robust Version protection against vandalism, theft and unauthorised operation. The highest temperature set point can be decreased by 10 K externally by means of a coin slot operation, without changing the concealed base set point. Otherwise same as 1 9860 10. “HERZCULES”, HERZ-Thermostatic Head, Robust Version protection against vandalism, theft and unauthorised operation. The highest temperature set point can be decreased by 4 K externally by means of a coin slot operation, without changing the concealed base set point. Otherwise same as 1 9860 10. 90560 5 1 9860 10 20 91050 0 1 9861 10 20 91260 3 1 9861 40 20 3 Heating Product 1 group HERZ-Design Thermostatic Heads “Mini” with threaded connection M 28 x 1.5 suitable for HERZ-Thermostatic Valves* EAN 90 04174 Order number Item HERZ-Design Thermostatic Head “Mini” With hydrosensor, set value range 6–30 °C, with “0” position, frost protection approx. 6 °C adjustable. Limitation and locking of set value range by means of stop pins 1 9551 02 (to be ordered separately). Dimensions: Length 75 mm, diameter of hand wheel 45 mm. 90520 9 1 9200 30 20 HERZ-Design Thermostatic Head “Mini” With hydrosensor, set value range 6–28 °C, automatic frost protection at approx. 6 °C. Limitation and locking of set value range by means of stop pins 1 9551 02 (to be ordered separately). Dimensions: Length 75 mm, diameter of hand wheel 45 mm. 90530 8 1 9200 60 20 HERZ-Design Thermostatic Head “Mini” GS With hydrosensor, set value range 6–30 °C, with “0” position, frost protection approx. 6 °C adjustable. Limitation and locking of set value range by means of stop pins 1 9551 02 (to be ordered separately). 91700 4 1 9200 03 20 HERZ-Design Thermostatic Head “Mini” GS With hydrosensor, set value range 6–28 °C, automatic frost protection at approx. 6 °C. Limitation and locking of set value range by means of stop pins 1 9551 02 (to be ordered separately). 91690 8 1 9200 06 20 HERZ-Design Thermostatic Head “Mini”, “Turbo” With hydrosensor, set value range 6–30 °C, with “0” position, automatic frost protection at approx. 6 °C adjustable. Limitation and locking of set value range by means of stop pins 1 9551 02 (to be ordered separately). 91740 0 1 9200 13 20 HERZ-Design Thermostatic Head “Mini”, “Turbo” With hydrosensor, set value range 6–28 °C, automatic frost protection at approx. 6 °C. Limitation and locking of set value range by means of stop pins 1 9551 02 (to be ordered separately). 91730 1 1 9200 16 20 Model 4 Heating Product 1 group HERZ-Design Thermostatic Heads, Special Models, with threaded connection M 28 x 1.5 suitable for HERZ-Thermostatic Valves* EAN 90 04174 Order number Item 72460 2 1 7260 35 20 72700 9 1 7235 01 20 M 28 x 1.5 90090 7 1 9102 80 20 M 28 x 1.5 ohne 1 6329 30 20 M 28 x 1.5 82490 6 1 8531 35 1 M 28 x 1.5 72070 3 1 7740 63 1 Model Dim. HERZ-Thermostatic Head for Applications with Increased Temperature Requirement Set value range 11–35 °C. cannot be shut off mechanically, automatic frost protection at approx. 6 °C. HERZ-Thermostatic Heads for HERZ-Thermostatic Valves prior to 1977 HERZ Thermostatic Head With hydrosensor, set value range 6–28 °C, cannot be shut off mechanically, automatic frost protection at approx. 6 °C. Limitation and locking of set value range by means of stop pins 1 9551 00 (to be ordered separately), suitable for all HERZ-Thermostatic valves prior to 1977. HERZ-Design-Handwheels HERZ-Design-Hand Wheels For HERZ-Thermostatic valves which are not equipped with a HERZ-Thermostatic head. HERZ-TS-Cap Brass solid protection cap for thermostatic valves TS-E, Calis TS-E-3D, threaded connection M 28 x 1.5. Manual hand wheel with adjustment settings. Manual hand wheel with adjustment settings. HERZ-Thermostatic Heads “DE LUXE” with threaded connection M 28 x 1.5 suitable for HERZ-Thermostatic Valves* HERZ-Thermostatic Head series “DE LUXE”, chrome With hydrosensor, with “0” position as well as cover sleeve and locking ring. Frost protection approx. 6 °C adjustable, set value range 6–30 °C. 90160 7 1 9230 41 1 HERZ-Thermostatic Head series “DE LUXE”, white (RAL 9010) 90180 5 1 9230 44 1 HERZ-Thermostatic Head series “DE LUXE”, matt black 90290 1 1 9230 49 1 HERZ-Thermostatic Heads “Mini” “DE LUXE” with threaded connection M 28 x 1,5 suitable for HERZ-Thermostatic Valves HERZ-Thermostatic Head Mini series “DE LUXE”, Frost protection approx. 6 °C adjustable, set value range 6–30 °C. chrome 91560 4 1 9200 41 1 5 Heating Product 1 group HERZ-Thermostatic Heads “DE LUXE” with threaded connection M 28 x 1.5 suitable for HERZ-Thermostatic Valves* Model HERZ-Thermostatic Head series “DE LUXE”, Colour Pergamum With hydrosensor, with “0” position, cover sleeve and locking ring. Frost protection approx. 6 °C adjustable, set value range 6–30 °C. Colour Aegean Colour Manhattan Colour Edelweiss Colour Calypso Colour Bahama beige Colour Greenwich Colour Jasmine Colour Natural Colour Ultramarine blue (RAL 5002) Colour Flame red (RAL 3000) Colour Ruby red (RAL 3003) Colour Signal blue (RAL 5005) Colour Golden yellow (RAL 1004) Colour Light ivory (RAL 1015) EAN 90 04174 Order number Item 90580 3 S 9230 01 1 90570 4 S 9230 02 1 90610 7 S 9230 03 1 90770 8 S 9230 04 1 90780 7 S 9230 05 1 90790 6 S 9230 06 1 90800 2 S 9230 07 1 90810 1 S 9230 08 1 90820 0 S 9230 09 1 90830 9 S 9230 10 1 90840 8 S 9230 11 1 90850 7 S 9230 12 1 90860 6 S 9230 13 1 90870 5 S 9230 14 1 90880 4 S 9230 15 1 Other colours are available upon request 6 Chrome Greenwich Matt black Jasmine White RAL 9010 Natural Pergamum Ultramarine blue RAL 5002 Aegean Flame red RAL 3001 Manhattan Ruby red RAL 3003 Edelweiss Signal blue RAL 5005 Calypso Golden yellow RAL Bahama beige Light ivory RAL 1015 Differences in colours due to printing reasons! Heating Product 1 group HERZ-Design Thermostats with Remote Adjustment or Remote Sensor, with threaded connection M 28 x 1.5 suitable for HERZ-Thermostatic Valves* Model HERZ-Design Thermostats with remote sensor Thermostat with hydrosensor, capillary tube and remote sensor. Set value range 6–30 °C, with “0” position, frost protection approx. 6 °C adjustable. Limitation and locking of set value range by means of stop pins 1 9551 00 (to be ordered separately). EAN 90 04174 Order number Item 90120 1 1 9430 08 10 90600 8 1 9430 18 1 90140 9 1 9460 06 10 90690 9 1 9460 18 1 Capillary tube length 2000 mm. Capillary tube length 8000 mm. HERZ-Design Thermostats with remote sensor Thermostat with hydrosensor, capillary tube and remote sensor. Set value range 6–28 °C, automatic frost protection at approx. 6 °C. Limitation and locking of set value range by means of stop pins 1 9551 00 (to be ordered separately). Capillary tube length 2000 mm. Capillary tube length 8000 mm. HERZ-Design Thermostats with Remote Adjustment and threaded connection M 28 x 1.5 suitable for HERZ-Thermostatic Valves* HERZ-Design Thermostats with remote adjustment Thermostat with hydrosensor, capillary tube and valve cover. Set value range 6–28 °C, frost protection approx. 6 °C adjustable. Limitation and locking of set value range. 90130 0 1 9330 05 5 Capillary tube length 5000 mm. 90320 5 1 9330 10 5 Capillary tube length 8000 mm. 90330 4 1 9330 18 1 Capillary tube length 2000 mm. HERZ-Design Thermostats with Remote Adjustment and threaded connection M 28 x 1.5 suitable for HERZ-Thermostatic Valves* HERZ-Thermostat with remote adjustment for surface mounting Suitable for HERZ-Thermostatic valves, thermostat with hydrosensor, capillary tube and valve cover, set value range 6–28 °C, limitation and locking of set value range possible, frost protection approx. 6 °C length of capillary tube 2000 mm. 91400 3 1 9352 00 5 HERZ-Thermostat with remote adjustment for surface mounting Suitable for HERZ-Thermostatic valves, thermostat with hydrosensor, capillary tube and valve cover, set value range 6–28 °C, limitation and locking of set value range possible, frost protection approx. 6 °C length of capillary tube 5000 mm. 91410 2 1 9355 00 5 HERZ-Thermostat with remote adjustment for surface mounting Suitable for HERZ-Thermostatic valves, thermostat with hydrosensor, capillary tube and valve cover, set value range 6–28 °C, limitation and locking of set value range possible, frost protection approx. 6 °C length of capillary tube 8000 mm. 91420 1 1 9358 00 5 HERZ-Thermostat with remote adjustment for surface mounting Suitable for HERZ-Thermostatic valves, thermostat with hydrosensor, capillary tube and valve cover, set value range 6–28 °C, limitation and locking of set value range possible, frost protection approx. 6 °C length of capillary tube 10000 mm. 91430 0 1 9350 00 5 7 Heating Product 1 group HERZ-Thermostats with Contact Sensor and threaded connection M 28 x 1.5 suitable for HERZ-Thermostatic Valves* EAN 90 04174 Order number Item HERZ Thermostat with contact sensor for floor heating systems Thermostatic head with hydrosensor, capillary tube, pipe contact sensor and fastening materials for piping. Set value range 20–50 °C, capillary tube length 2000 mm. 72390 2 1 7420 06 10 HERZ Thermostat with contact sensor for floor heating systems Thermostatic head with hydrosensor, capillary tube, pipe contact sensor and fastening materials for piping. Set value range 20–50 °C, capillary tube length 500 mm. 76280 2 1 7420 16 10 HERZ-Thermostat with contact sensor for boiler intake temperature control Thermostatic head with hydrosensor, capillary tube, pipe contact sensor and fastening materials for piping. Set value range 40–70 °C, capillary tube length 2000 mm. 70210 5 1 7421 00 10 Model HERZ-Design Thermostats with Contact Sensor and threaded connection M 28 x 1,5 HERZ-Design Thermostats with contact sensor Thermostatic head with hydrosensor, capillary tube, pipe contact sensor and fastening materials for piping. Set value range: 30-60 °C, capillary tube length 500 mm. 91870 4 1 9421 26 20 66240 9 1 6313 01 20 90720 3 1 9260 11 6 91890 2 1 9200 69 20 92230 5 1 9200 24 20 Insertion pocket Insertion pocket made of brass For 7420/7421, with screw thread G 1/2. HERZ-Design Thermostatic Head for Vaillant Valves HERZ-Design-Thermostatic Head for Vaillant Thermostatic Valves With hydrosensor, set value range 6-30 °C, with “0” position, frost protection approx. 6 °C adjustable. Limitation and locking of set value range by means of stop pins 1 9551 00 (to be ordered separately). Connection diameter 31 mm. HERZ-Design Thermostatic Head “Mini” for “MMA” Valves HERZ-Design “Mini” Thermostatic Head for “MMA” Valves With hydrosensor, set value range 6-30 °C, with “0” position, automatic frost protection at approx. 6 °C adjustable. Limitation and locking of set value range by means of stop pins 1 9551 02 (to be ordered separately). HERZ-Thermostatic Head for Armal Thermostatic Valves Thermostatic Head “Mini” for Armal Valves With hydrosensor, set value range 6 -30 °C, with “0” position, automatic frost protection at approx.6 °C adjustable. M 24 x 1.5, Limitation and locking of set value range by means of stop pins 1 9551 02 (to be ordered separately). For valves manufactured before 1999. HERZ-Thermostats Adapter for installation all HERZ-Thermostatic Heads with threaded connection M 28 x 1.5 Thermostats Adapter Ring for T&A for installation Thermostatic Heads with threaded connection M 28 x 1.5 66400 7 1 6350 03 1 Thermostatic Adapter Ring for Caleffi-Thermostatic Valves M 30 x 1.5. 62810 8 1 6357 11 1 66410 6 1 6351 01 1 Thermostatic adaptor ring for Caleffi Thermostatic valves Thread M 30 x 1.5 Threaded connection M 30 x 1.5 8 Heating Product 1 group HERZ-Design Thermostatic Heads “H” with threaded connection M 30 x 1.5 for direct installation on radiators with integrated valves Model HERZ-Design Thermostatic Head “H” With hydrosensor, set value range 6–30 °C, with “0” position, automatic frost protection at approx. 6 °C adjustable. Limitation and locking of set value range by means of stop pins 1 9551 00 (to be ordered separately). Design developed in co-operation with “Porsche Design GmbH”. HERZ-Design Thermostatic Head “H” With hydrosensor, set value range 6–28 °C, automatic frost protection at approx. 6 °C. Limitation and locking of set value range by means of stop pins 1 9551 00 (to be ordered separately). Design developed in co-operation with “Porsche Design GmbH”. EAN 90 04174 Order number Item 90040 2 1 9230 98 20 90060 0 1 9260 98 20 HERZ-Thermostatic Heads “H” with threaded connection M 30 x 1.5 for direct installation on radiators with integrated valves HERZ-Thermostatic Head “H” With hydrosensor, set value range 6–28 °C, cannot be shut off mechanically, automatic frost protection at approx. 6 °C. Limitation and locking of set value range by means of stop pins 1 9551 00 (to be ordered separately). 71680 5 1 7260 98 20 HERZ-Design Thermostatic Heads “Mini-H” with threaded connection M 30 x 1.5 HERZ-Design Thermostatic Head “Mini-H” With hydrosensor, set value range 6-30 °C, with “0” position, automatic frost protection at approx. 6 °C adjustable. Limitation and locking of set value range by means of stop pins 1 9551 02 (to be ordered separately). Dimensions: Length 78 mm, diameter of hand wheel 45 mm. HERZ-Design Thermostatic Head “Mini-H” With hydrosensor, set value range 6-28 °C, automatic frost protection at approx. 6 °C. Limitation and locking of set value range by means of stop pins 1 9551 02 (to be ordered separately). Dimensions: Length 78 mm, diameter of hand wheel 45 mm. 90540 7 1 9200 38 20 90550 6 1 9200 68 20 HERZ-Thermostatic Heads “H”, Robust Version “HERZCULES” with threaded connection M 30 x 1.5 “HERZCULES”, HERZ-Thermostatic Head “H”, Robust Version protection against vandalism, theft and unauthorised operation. With hydrosensor, set value range 8–26 °C, with automatic frost protection. Mounting and dismounting only possible by means of tightening tool 1 9554 01 and Allen key 1 6616 00. Control of set value by means of unlocking tool 1 9554 00 (included), set value control is locked. In locked position, set value indicator remains concealed. “HERZCULES”, HERZ-Thermostatic Head “H”, Robust Version protection against vandalism, theft and unauthorised operation, temperature can be decreased. The highest temperature set point can be decreased by 10 K externally by means of a coin slot operation, without changing the concealed base set point. Otherwise same as 1 9860 98. “HERZCULES”, HERZ-Thermostatic Head “H”, Robust Version protection against vandalism, theft and unauthorised operation, temperature can be decreased. The highest temperature set point can be decreased by 4 K externally by means of a coin slot operation, without changing the concealed base set point. Otherwise same as 1 9860 98. 90730 2 1 9860 98 20 91060 9 1 9861 98 20 91270 2 1 9861 48 20 9 Heating Product 1 group HERZ-Thermostatic Head “H” with threaded connection M 30 x 1.5 Model EAN 90 04174 Order number Item 90100 3 1 9102 98 20 HERZ-Design Hand Wheel “H” For direct installation on Heimeier-Valve inserts with threaded connection M 30 x 1.5, which are not equipped with a thermostatic head. HERZ-Thermostatic Heads H “DE LUXE” with threaded connection M 30 x 1.5 HERZ-Thermostatic Head H “DE LUXE”, chrome With hydrosensor, with “0” position, cover sleeve and locking ring. Frost protection approx. 6 °C adjustable, set value range 6-30 °C. HERZ-Thermostatic Head H “DE LUXE”, white (RAL 9010) HERZ-Thermostatic Head H “DE LUXE”, matt black 90340 3 1 9238 41 1 90370 0 1 9238 44 1 90380 9 1 9238 49 1 HERZ-Thermostatic Heads Mini H “DE LUXE” with threaded connection M 30 x 1.5 HERZ-Thermostatic Head Mini H “DE LUXE”, chrome With hydrosensor, with “0” position, cover sleeve and locking ring, frost protection approx. 6 °C adjustable, set value range 6-30 °C. 91570 3 1 9200 48 1 HERZ-Design Thermostatic Heads “Mini”, GS, with threaded connection M 30 x 1.5 HERZ-Design Thermostatic Head “Mini-H” with straight grooves With hydrosensor, set value range 6-30 °C, with “0” position, automatic frost protection at 6 °C adjustable. Limitation and locking of set value range by means of stop pins 1 9551 02 (to be ordered separately). 91720 2 1 9200 83 20 HERZ-Design Thermostatic Head “Mini-H” with straight grooves With hydrosensor, set value range 6-28 °C, automatic frost protection at approx. 6 °C. Limitation and locking of set value range possible by means of stop pins 1 9551 02 (to be ordered separately). 91710 3 1 9200 86 20 HERZ-Design Thermostatic Heads “Mini”, Turbo, with threaded connection M 30 x 1.5 10 HERZ-Design Thermostatic Head “Turbo-H” With hydrosensor, set value range 6-28 °C, automatic frost protection at approx. 6 °C. Limitation and locking of set value range possible by means of stop pins 1 9551 02 (to be ordered separately). 91760 8 1 9200 93 20 HERZ-Design Thermostatic Head “Turbo-H” With hydrosensor, set value range 6-30 °C, with “0” position, automatic frost protection at 6 °C adjustable. Limitation and locking of set value range by means of stop pins 1 9551 02 (to be ordered separately). 91750 9 1 9200 96 20 Heating Product 1 group HERZ-Thermostatic Heads “H” “DE LUXE” with threaded connection M 30 x 1.5 for direct installation on radiators with integrated valves Model HERZ-Thermostatic Head H “DE LUXE”, Colour Pergamum With hydrosensor, with “0” position, cover sleeve and locking ring. Frost protection approx. 6 °C adjustable, set value range 6-30 °C. Colour Aegean Colour Manhattan Colour Edelweiss Colour Calypso Colour Bahama beige Colour Greenwich Colour Jasmine Colour Natural Colour Ultramarine blue (RAL 5002) Colour Flame red (RAL 3000) Colour Ruby red (RAL 3003) Colour Signal blue (RAL 5005) Colour Golden yellow (RAL 1004) Colour Light ivory (RAL 1015) EAN 90 04174 Order number Item 91100 2 S 9238 01 1 91110 1 S 9238 02 1 91120 0 S 9238 03 1 91130 9 S 9238 04 1 91140 8 S 9238 05 1 91150 7 S 9238 06 1 91160 6 S 9238 07 1 91170 5 S 9238 08 1 91180 4 S 9238 09 1 91190 3 S 9238 10 1 91200 9 S 9238 11 1 91210 8 S 9238 12 1 91220 7 S 9238 13 1 91230 6 S 9238 14 1 91240 5 S 9238 15 1 Other colours are available upon request Chrome Greenwich Matt black Jasmine White RAL 9010 Natural Pergamum Ultramarine blue 5002 Aegean Flame red RAL 3001 Manhattan Ruby red RAL 3003 Edelweiss Signal blue RAL 5005 Calypso Golden yellow RAL Bahama beige Light ivory RAL 1015 Differences in colours due to printing reasons! 11 Heating Product 1 group HERZ-Design Thermostats with Remote Adjustment or Remote Sensor, with threaded connection M 30 x 1.5 Model HERZ-Design Thermostats with remote sensor Thermostat with hydrosensor, capillary tube and remote sensor. Set value range 6–30 °C, with “0” position, frost protection approx. 6 °C adjustable. Limitation and locking of set value range by means of stop pins 1 9551 00 (to be ordered separately). Capillary tube length 2000 mm. HERZ-Design Thermostats with remote sensor Thermostat with hydrosensor, capillary tube and remote sensor. Set value range 6–28 °C, automatic frost protection at approx. 6 °C. Limitation and locking of set value range by means of stop pins 1 9551 00 (to be ordered separately). Capillary tube length 2000 mm. EAN 90 04174 Order number Item 91010 4 1 9430 98 10 91010 3 1 9460 98 10 HERZ-Design Thermostats with Remote Adjustment and threaded connection M 30 x 1.5 HERZ-Design Thermostats with remote adjustment Thermostat with hydrosensor, capillary tube and valve cover. Set value range 6–28 °C, frost protection approx. 6 °C adjustable. Limitation and locking of set value range. Capillary tube length 2000 mm. 91090 6 1 9330 98 10 HERZ-Design Thermostats with Remote Adjustment and threaded connection M 30 x 1.5 HERZ-Thermostat with remote adjustment for surface mounting Suitable for HERZ-Thermostatic valves, thermostat with hydrosensor, capillary tube and valve cover, set value range 6-28 °C, limitation and locking of set value range possible, frost protection approx. 6 °C length of capillary tube 2000 mm. 91440 9 1 9352 98 5 HERZ-Thermostat with remote adjustment for surface mounting Suitable for HERZ-Thermostatic valves, thermostat with hydrosensor, capillary tube and valve cover, set value range 6-28 °C, limitation and locking of set value range possible, frost protection approx. 6 °C length of capillary tube 5000 mm. 91450 8 1 9355 98 5 HERZ-Thermostat with remote adjustment for surface mounting Suitable for HERZ-Thermostatic valves, thermostat with hydrosensor, capillary tube and valve cover, set value range 6-28 °C, limitation and locking of set value range possible, frost protection approx. 6 °C length of capillary tube 8000 mm. 91460 7 1 9358 98 5 HERZ-Thermostat with remote adjustment for surface mounting Suitable for HERZ-Thermostatic valves, thermostat with hydrosensor, capillary tube and valve cover, set value range 6-28 °C, limitation and locking of set value range possible, frost protection approx. 6 °C length of capillary tube 10000 mm. 91470 6 1 9350 98 5 HERZ-Design Thermostats with Contact Sensor and threaded connection M 30 x 1.5 HERZ-Design Thermostats with contact sensor Thermostatic head with hydrosensor, capillary tube, pipe contact sensor and fastening materials for piping. Set value range: 30-60 °C, capillary tube length 500 mm. HERZ-Design Thermostats with contact sensor Thermostatic head with hydrosensor, capillary tube, pipe contact sensor and fastening materials for piping. Set value range: 20-50 °C, capillary tube length 2000 mm. 12 91910 7 1 9421 98 20 - 1 9420 88 10 Heating Product 1 group HERZ-Design Thermostatic Heads “D” for direct installation on radiators with integrated valves with clip or snap-on fastening EAN 90 04174 Order number Item HERZ-Design Thermostatic Head “D” With hydrosensor, set value range 6-30 °C, with “0” position, automatic frost protection at approx. 6 °C adjustable. Limitation and locking of set value range by means of stop pins 1 9551 00 (to be ordered separately). Design developed in co-operation with “Porsche Design GmbH”. 90050 1 1 9230 99 20 HERZ-Design Thermostatic Head “D” With hydrosensor, set value range 6-28 °C, automatic frost protection at approx. 6 °C. Limitation and locking of set value range by means of stop pins 1 9551 00 (to be ordered separately). Design developed in co-operation with “Porsche Design GmbH”. 90070 9 1 9260 99 20 HERZ-Design Thermostatic Head “D” With hydrosensor, set value range 6-30 °C, with “0” position, automatic frost protection at approx. 6 °C adjustable. Limitation and locking of set value range by means of stop pins 1 9551 00 (to be ordered separately). 90050 1 1 9230 09 20 HERZ-Design Thermostatic Head “D” With hydrosensor, set value range 6-28 °C, automatic frost protection at approx. 6 °C. Limitation and locking of set value range by means of stop pins 1 9551 00 (to be ordered separately). 90070 9 1 9260 09 20 71690 4 1 7260 99 20 Model Dim. HERZ-Thermostatic Heads HERZ-Thermostatic Head “D” HERZ-Thermostatic Head “D” With hydrosensor, set value range 6-28 °C, cannot be shut off mechanically, automatic frost protection at approx. 6 °C. Limitation and locking of set value range. HERZ-Thermostatic Adapter Rings “D” Thermostatic Adapter Ring “D” For radiators with integrated valves with Danfoss thermostatic inserts. M 20 x 1 61180 3 1 6362 01 1 Thermostatic Adapter Ring “D” For radiators with integrated valves with Danfoss thermostatic inserts. M 23.5 x 1.5 63330 0 1 6362 11 1 Thermostatic Adapter Ring “D” “HERZCULES” for Danfoss upper parts, suitable for special models. ø 23 65160 1 1 6362 00 1 Thermostatic Adapter Ring “D” “HERZCULES” For installation of “HERZCULES”-Thermostatic heads on radiators with Danfoss thermostatic inserts. M 20 x 1 64280 7 1 6362 20 1 Thermostatic Adapter Ring “D” “HERZCULES” For installation of “HERZCULES”-Thermostatic heads on radiators with Danfoss thermostatic inserts. M 23.5 x 1.5 64290 6 1 6362 23 1 HERZ-Thermostatic heads for Danfoss valves Old Design with hydrosensor, set value range 6-28 °C, automatic frost protection at approx. 6 °C. Limitation and locking of set value range by means of stop pins 1 9551 02 (to be ordered separately). For Valves manufactured 1971-1981. ø 26 90080 6 1 9200 19 20 Thermostatic heads for Danfoss valves Old Design with hydrosensor, set value range 6-28 °C, automatic frost protection at approx. 6 °C. Limitation and locking of set value range by means of stop pins 1 9551 02 (to be ordered separately). For Valves manufactured 1965-1979. ø 34 90090 5 1 9260 19 20 HERZ-Thermostatic Head for Danfoss till 1981 13 Heating Product 1 group HERZ-Design Hand Wheels with clip or snap-on fastening Model HERZ-Design Hand Wheel “D” For direct installation with clip or snap-on fastening, suitable for Danfoss-Valve inserts which are not equipped with a thermostatic head. EAN 90 04174 Order number Item 90110 2 1 9102 99 20 HERZ-Thermostatic Heads D “DE LUXE” with clip or snap-on fastening HERZ-Thermostatic Head D “DE LUXE”, chrome With hydrosensor, with “0” position as well as cover sleeve and locking ring. Frost protection approx. 6 °C adjustable, set value range 6-30 °C. 90430 1 1 9239 41 1 HERZ-Thermostatic Head D “DE LUXE”, white (RAL 9010) 90460 8 1 9239 44 1 HERZ-Thermostatic Head D “DE LUXE”, matt black 90470 7 1 9239 49 1 91790 5 1 9330 99 5 HERZ-Design Thermostats “D” with remote adjustment HERZ-Design Thermostats with remote adjustment Thermostat with hydrosensor, capillary tube and valve cover. Set value range 6-28 °C, frost protection approx. 6 °C adjustable. Limitation and locking of set value range. Capillary tube length 2000 mm. HERZ-Thermostats “D” with Remote Adjustment and clip or snap-on fastening HERZ-Thermostat “D” with remote adjustment suitable for mounting in flush box Thermostat with hydrosensor, capillary tube and valve cover, set value range 6-28 °C, limitation and locking of set value range possible, frost protection approx. 6 °C. 91480 5 1 9352 99 5 91490 4 1 9355 99 5 91500 0 1 9358 99 5 91510 9 1 9350 99 5 Capillary tube length 2000 mm. HERZ-Thermostat “D” with remote adjustment suitable for mounting in flush box Thermostat with hydrosensor, capillary tube and valve cover, set value range 6-28 °C, limitation and locking of set value range possible, frost protection approx. 6 °C. Capillary tube length 5000 mm. HERZ-Thermostat “D” with remote adjustment suitable for mounting in flush box Thermostat with hydrosensor, capillary tube and valve cover, set value range 6-28 °C, limitation and locking of set value range possible, frost protection approx. 6 °C. Capillary tube length 8000 mm. HERZ-Thermostat “D” with remote adjustment suitable for mounting in flush box Thermostat with hydrosensor, capillary tube and valve cover, set value range 6-28 °C, limitation and locking of set value range possible, frost protection approx. 6 °C. Capillary tube length 10000 mm. 14 Heating Product 1 group HERZ-Thermostatic Heads D “DE LUXE” with clip or snap-on fastening Model HERZ-Thermostatic Head D “DE LUXE”, colour Pergamum with hydrosensor, with “0” position, including cover sleeve and locking ring. Frost protection approx. 6 °C adjustable, set value range 6-30 °C. Colour Aegean Colour Manhattan Colour Edelweiss Colour Calypso Colour Bahama beige Colour Greenwich Colour Jasmine Colour Natural Colour Ultramarine blue (RAL 5002) Colour Flame red (RAL 3000) Colour Ruby red (RAL 3003) Colour Signal blue (RAL 5005) Colour Golden yellow (RAL 1004) Colour Light ivory (RAL 1015) EAN 90 04174 Order number Item 90750 0 S 9239 01 1 90740 1 S 9239 02 1 90760 9 S 9239 03 1 90890 3 S 9239 04 1 90900 9 S 9239 05 1 90910 8 S 9239 06 1 90920 7 S 9239 07 1 90930 6 S 9239 08 1 90940 5 S 9239 09 1 90950 4 S 9239 10 1 90960 3 S 9239 11 1 90970 2 S 9239 12 1 90980 1 S 9239 13 1 90990 0 S 9239 14 1 91000 5 S 9239 15 1 Other colours are available upon request Chrome Greenwich Matt black Jasmine White RAL 9010 Natural Pergamum Ultramarine blue RAL 5002 Aegean Flame red RAL 3001 Manhattan Ruby red RAL 3003 Edelweiss Signal blue RAL 5005 Calypso Golden yellow RAL Bahama beige Light ivory RAL 1015 Differences in colours due to printing reasons! 15 Accessories and Tools Product 1 group Accessories and Tools for HERZ-Thermostatic Heads EAN 90 04174 Order number Item 90020 4 1 9552 03 20 90080 8 1 9552 98 20 Cover sleeve For fastening nut of HERZ-Thermostatic heads. Threaded connection M 28 x 1.5. 90230 7 1 9553 44 20 Cover sleeve For HERZ-Thermostatic head “Mini”. Threaded connection. M 28 x 1.5. 90710 4 1 9596 44 20 Cover sleeve “H” Standard length l = 20 mm. Threaded connection M 30 x 1.5. 90310 6 1 9553 98 20 Cover sleeve “H” Long version l = 22.5 mm. Threaded connection M 30 x 1.5. 90650 3 1 9598 44 20 Cover sleeve “H” and HERZ-Thermostat - “Mini-H” Short version l = 17 mm. Threaded connection M 30 x 1.5. 90700 5 1 9597 44 20 Cover sleeve “D” For HERZ-Thermostatic heads “D” with clip or snap-on fastening. 90640 4 1 9599 44 20 Limiting pin For limitation and locking of set value range for HERZ-Thermostatic heads, series 7000 and 9000. 90010 5 1 9551 00 20 90670 1 1 9551 02 20 70260 0 1 7555 00 10 90630 5 1 9554 00 1 90620 6 1 9554 01 1 1 7000 .. 500 Model Theft protection Snap clips, open with universal key 1 6640 00. For HERZ-Thermostatic heads, series 7000 and 9000. Threaded connection M 28 x 1.5, for thermostatic heads, series “D” with clip or snap-on fastening. Theft protection “H” Snap clips, open with universal key 1 6640 00. For HERZ-Thermostatic heads, series 7000 and 9000. Threaded connection M 30 x 1.5. Limiting pin For HERZ-Thermostatic heads “Mini”. Retaining clips For fastening of capillary tubes, 20 piece set with pins. Unlocking tool “HERZCULES” For setting of set value. Included in package, delivery ex works. Tightening tool “HERZCULES” For installation of “HERZCULES”-Thermostatic heads on thermostatic valves. To be ordered separately. HERZ-Logo-Clip Logo clip for customer-specific logos, suitable for HERZ-Thermostatic heads, series 7000, with threaded connection M 28 x 1.5, M 30 x 1.5 and “D”, not suitable for special type thermostatic heads. 16 Control Systems Product 1 group HERZ-RTC-Electronic Control System for Continuous Control Model HERZ-RTC-Room Temperature Computer With 3 weekly programmes, 4 temperature steps, vacation programme for heating and cooling, switching difference adjusting. Set value range 5-40 °C, operating voltage 24 V, output voltage 0-10 V. Dim. EAN 90 04174 Order number Item 24 V 71890 8 1 7940 62 1 HERZ-Electronic Room Temperature Controller for Heating and Cooling Electronic Room Temperature Controller with PI control For heating and cooling operation, with programmable time and temperature settings. Outlets for motor (3-point) and thermal drive and pump or blower (on/off signal). Fix basic programme (preset condition) for first start-up. Easy adjustment to system by selecting 8-basis control model by service parameter. Electronics located in the attachable body, white (RAL 9010), front with digital display in viewing window. Digital timer with weekly and yearly programme, relay with elapsed time indicator. For installation on a wall or flush-mouning socket. 230 V 75190 5 1 7794 23 1 24 V 75200 1 1 7794 24 1 HERZ-Electronic Room Temperature Controller for 2-Point or Pulse Control with digital timer Electronic Room Temperature Controller For individual time and temperature programmable adjustment. Digital timer with program on a weekly and yearly basis, automatic switching between summer and winter time. Set value range 8-38 °C. Switching difference as 2-point controller 0.4-8 K. Metering precision 0.3 K at a temperature of 20 °C. 230 V 74190 6 1 7791 23 1 Electronic Room Temperature Controller Design as 1 7791 23, but operation by 2 alkalimanganese penlight type round cells (AA) 1.5 V, not included in package. 3V 74200 2 1 7791 02 1 Digital chrono thermostat The digital chrono thermostat with 4 user programmes and 9 fixed programmes. Powered by 3 batteries High accuracy, easy to install (2 wires), easy to programme Operating voltage: 3 x AA LR6 1.5 V Battery life time: 3 ears Operating temperature: 0 °C to 50 °C. Output: Relay 8 A Setting temperature: 5 °C to 35 °C. Differential temperature 0.4 K Protection class: IP 30 4.5 V 75201 8 1 7795 01 1 3V 75202 5 1 7795 02 1 230 V 99958 1 3 F792 00 112 24 V 99959 8 3 F792 01 112 230 V 50 Hz 71840 3 1 7790 15 1 24 V 71850 2 1 7790 25 1 230 V / 24 V 99953 6 3 F791 00 1 Electronic thermostat with mechanical weeklyprogramming clock: - Day temperature setting: + 5 °C to +35 °C - Night temperature setting: 5 °C to 35 °C, Temperature differential: 0.5 °C. Power of contacts: 8 (3) A 250 V- Clock programming: 7 days (weekly) or 1 day 24 hours. Clock programming: intervals 15 minutes (daily), 1 hour (weekly) Power: 2 batteries LR6 AA 1.5 V (life duration 2 years) A switch 3 positions enables select ) the type of regulation required. Electrical with ( protection: Class II, IP 30. HERZ-Room Temperature Controller for 2-Point Control Electronic room thermostat for floor heating, 230 V for room temperature contol with night set back mode. External pilot wire for night set back, equipped with a switch to select comfort, set back or clock mode. Possibility to regulate either the floor or the room temperature, or combined (in that case, the floor sensor is used as temperature limiter) Operating voltage: 230 V~, 50 Hz. Setting temperature: 5 °C to 30 °C. Output: Max. 15 W Differential temperature: 0.5 K. Protection class: IP 30. Electronic room thermostat for floor heating, 24 V Operating voltage: 24 V ~, functions same as above. Electronic Room Temperature Controller 1 change-over contact Set value range 10-30 °C. Switching difference ± 0.2 K fixed Electromechanical Room Temperature Controller 1 change-over contact, set value range 5-30 °C. Adjustment of set value by means of mechanical limitation of set value range. 17 Control Systems Product 1 group HERZ-RTC-Electronic Control System for Continuous Control Model DDC actuating drive Thermo-electronic continuous drive, 3-conductor connection cable. Operating voltage 24 V, driving voltage 0-10 V DC, up to 6 units per controller can be connected Dim. EAN 90 04174 Order number Item 24 V 10 kΩ / 100 kΩ 71900 4 1 7990 00 1 HERZ-Actuating Drives and Electronic Control Systems for Thermostatic Three-Way Valves HERZ-Actuating drives for continuous control, M 30 x 1.5 Thermo-electronic continuous drive, 3-conductor connection cable, operating voltage 24 V, driving voltage 0-10 V DC. 0-10 V / 24 V 75160 8 1 7711 18 1 230 V 50 Hz 75260 5 1 7711 80 1 24 V 75270 4 1 7711 81 1 HERZ-Actuating drive for 2-point or pulse control Normally closed. 230 V 75710 5 1 7708 23 1 HERZ-Actuating drive for 2-point or pulse control normally open, installed in Compact Floor. 230 V 76460 8 1 7709 01 1 230 V 76470 7 1 7708 50 1 HERZ-Actuating drive for 2-point or pulse control with normaly closed contact (NC), can be switched to normaly open contact (NO), threaded connection M 28 x 1.5. 230 V 50 Hz 73140 2 1 7710 00 1 24 V 73150 1 1 7710 01 1 HERZ Actuating drive for 2-point or pulse control with normaly closed contact (NC), can be switched to normaly open contact (NO), not suitable for articles 7762 and 7763. Threaded connection M 30 x 1.5. 230 V 50 Hz 73160 0 1 7710 80 1 24 V 73170 9 1 7710 81 1 230 V 74110 4 1 7710 50 1 24 V 74120 3 1 7710 51 1 74130 2 1 7710 55 1 HERZ Actuating drives for 2-point or pulse control, M 30 x 1.5 For HERZ-thermostatic three-way valves 1 7762 and 1 7763; with normaly closed contact (NC), can be switched to normaly open contact (NO). HERZ-Actuating Drives HERZ-Actuating drive. Normally closed with limit switch. HERZ-Actuating drive for 2-point or pulse control Installed with auxiliary contact (1 changeover contact), threaded connection M 28 x 1.5. Auxiliary contact For actuating drives 1 7710 .., for retro fitting. 18 Accessories Product 1 group Adaptor for Actuator 7708, 7709, 7990 EAN 90 04174 Order number Item 76863 7 1 7708 90 1 Adapter for HERZ actuator, colour blue Adapter for use with 4002, 4006, 7217-TS-V M 28 x 1.5. 76861 3 1 7708 85 1 Adapter for HERZ actuator, gray Adapter for use with 7217-TS-E, M 28 x 1.5. 76860 6 1 7708 80 1 Adapter for use with 7760, M 30 x 1.5. 76862 0 1 7708 98 1 71881 6 1 7796 04 50 Model Dim. Adapter for HERZ actuator, colour red Standard adapter M 28 x 1.5. Transformer Transformer 230 V / 24 V Transformer 230 V specially made for modular connecting boxes 230 V~ or 110 V~ Output: max. 24 V~. Operating temperature: 0 °C to 50 °C Output Power: 60 VA (18 actuators) Protection class: IP 30. 230 V / 24 V 19 Control Systems Product 1 group HERZ-Room Temperature Control Model Dim. HERZ-Room Temperature Controller Comfort Electronic room thermostat for Fan Coil Operating voltage 230 V Set value range 5-35 °C ON/OFF Switch 3 position switch Swithching difference 0.6 K Protection class II IP 30 Output: max. 250 V~, 6 A EAN 90 04174 Order number 75205 6 1 7795 05 Item Wireless Control Systems HERZ-Electronic Room Temperature Control 20 Wireless control room thermostat Radio frequency thermostat to be used with our specific receiver. Equipped with 3 position switch: Comfort, Night Reduction and OFF mode. Personal code on each product. The receiver is equipped with 2 indicators (heating, configuration/reception). Switch for manual and automatic mode. Emitter: operating voltage: 2 x 3 V, CR 2430, battery life time: 2 years, operating temperature: 0 °C to 50 °C, setting temperature: 5 °C to 30 °C, frequency: 433.92 Mhz. Open Ground Distance: 40 meters. Protection Class: IP 30. Receiver: operating voltage: 230 V~ / 12 A, other voltage 24 V~, 120 V~... available upon request. Proctection class: IP 44. 230 V 99947 5 3 F799 04 24 Wireless control room thermostat Radio frequency digital thermostat to be used with our specific receiver. Equipped with a weekly programme, which enables power savings in harmony with your every day life. Personal code on each product. The receiver is equipped with 2 indicators (heating, configuration/reception). Switch for manual and automatic mode. Emitter: operating voltage: 3 x AA LR6 1.5 V, battery life time: 3 years, operating temperature: 0 °C to 50 °C, setting temperature: 5 °C to 30 °C, frequency: 433.92 Mhz. Open Ground Distance: 50 meters Protection Class: IP 30. Receiver: operating voltage: 230 V~ / 12 A, other voltage 24 V~, 120 V~... available upon request. Proctection class: IP 44. 230 V 99949 9 3 F799 06 100 Heating Product 1 group HERZ-Electronic Wireless Room Temperature Control 868,3 MHz Model EAN 90 04174 Order number Item 84700 4 1 8250 01 1 84710 3 1 8250 02 1 84720 2 1 8250 03 1 84730 1 1 8250 04 1 Energy Saving Thermostatic head with built in programmable temperature and time control. Setting range 5-30 °C Differential: 0.5 K Operation with batteries 2 x 1.5 V AA, LR6 Battery life: Approx 2 years Wireless remote control for radio energy-saving controller ETKF The wireless operated, remote control is a user-friendly device for changing the temperature in a room. If the remote control has been connected to a ETKF radio energy-saving controller for radiators. The ETKF head can receive commands from the remote control and implement them. Supply voltage: 3 V Batteries: 2 x LR 44 Battery life: approx 4 years. Working range 30 m. Wireless window contact for radio energy-saving controller ETKF This window contact is used to detect when a window is opened. If the window contact is connected to an ETKF head, the device will automatically reduce the temperature in the room during ventilation using the automatic temperature reduction function whilst windows are open. This enables heating costs to be lowered. Supply voltage: 3 V Batteries: 2 x LR 03 / Micro / AAA Battery life: approx 5 years. Working range: 30 m. USB programming stick for radio energy-saving controller ETKF The USB programming stick is used to program system components such as radio energy-saving controllers. The USB stick does not have any controls and must be used in conjunction with the associated PC software. Power supply: USB connection Working range: 10 m. 21 Heating Product 1 group HERZ-Return Temperature Limiter “Mini” Model HERZ-Return Temperature Limiter “Mini” Return temperature control between 25-60 °C, limitation and locking of set value range by means of stop pins 1 9551 02 (to be ordered separately). Can be combined with all HERZ-Valves which are available for thermostatic operation. HERZ-Return Temperature Limiter Mini chrom Return temperature control 25-60 °C, limitation and locking of set value range by means of stop pins 1 9551 02 (to be ordered separately). Can be combined with all HERZ-Valves which are available for thermostatic operation. HERZ-Return Temperature Limiter “Mini”, straight model: 1 9201 00 Return temperature limiter “Mini” 1 7733 81 HERZ-TS-90-Thermostatic valve, straight model Radiator connection with cone. Pipe connection with outside thread G 3/4 with cone. HERZ-Return Temperature Limiter “Mini”, angle model: 1 9201 00 Return temperature limiter “Mini” 1 7724 37 HERZ-TS-90-Thermostatic valve, angle model Radiator connection with cone. Pipe connection with outside thread G 3/4 with cone. Dim. EAN 90 04174 Order number Item M 28 91520 8 1 9201 00 10 M 28 92100 1 1 9201 41 10 1/2 91530 7 1 9201 23 1 1/2 91540 6 1 9201 24 1 Compression sets G 3/4 for copper, steel and plastic pipes have to be orded separately 22 Heating Product 1 group HERZ-Floor Heating Control Sets Dim. EAN 90 04174 Order number Item 15 81970 4 1 8100 01 1 HERZ-Floor heating control set for rooms up to 85 m² The set contains: HERZ-Thermostat with contact sensor (1 7420 06) Safety switch (1 8100 00) HERZ-TS-90-E Thermostatic valve DN 15 (1 7723 01) HERZ-RL-1-E Return valve DN 20 (1 3723 02). 20 82000 7 1 8100 02 1 HERZ-Floor heating control set for rooms up to 120 m² The set contains: HERZ-Thermostat with contact sensor (1 7420 06) Safety switch (1 8100 00) HERZ-TS-E Thermostatic valve DN 20 (1 7723 02) HERZ-RL-1-E Return valve DN 25 (1 3723 03). 20 82010 6 1 8100 03 1 HERZ-Floor heating control set for rooms up to 160 m² The set contains: HERZ-Thermostat with contact sensor (1 7420 06) Safety switch (1 8100 00) HERZ-TS-E Thermostatic valve DN 25 (1 7723 03) HERZ-Strömax 4115 Shutoff valve DN 32 (1 4115 04). 25 82020 5 1 8100 04 1 82030 4 1 8100 00 1 Model HERZ-Floor heating control set for rooms up to 45 m² The set contains: HERZ-Thermostat with contact sensor (1 7420 06). Safety switch (1 8100 00) HERZ-TS-90 Thermostatic valve DN 15 (1 7737 91) HERZ-GP Regulating valve DN 15 (1 5537 01). Safety switch For floor heating control set. HERZ-Floor Fix, Floor Heating Control Set for flush mounting HERZ-Floor Fix, floor heating control set for flush mounting For room temperature control and limitation of circulation temperature. Room regulation by HERZ-Remote adjustment 1 9330 and 1 7330 or HERZ-Actuating drive 1 7710, Pipe connection for HERZ-Compression adapter. Delivery includes flush box and cover. White cover. 3/4 82090 8 1 8100 10 1 HERZ-Floor Fix, floor heating control set for flush mounting For room temperature control and limitation of medium temperature. Room regulation by HERZ-Remote adjustment 1 9330 and 1 7330 or HERZ-Actuating drive 1 7710, Pipe connection for HERZ-Compression adapter Delivery includes flush box and cover Chrome cover. 3/4 82450 0 1 8100 11 1 3/4 82451 7 1 8100 15 1 Spare parts, HERZ-Floor Fix For room temperature andLimitation of the medium temperature. Space control with HEART-9330 remote control or HEART-actuator 7710 th Supplied without valves, Wall box and cover design. 23 Thermostatic Valves Product 1 group HERZ-TS-90-Thermostatic Valves Dim. EAN 90 04174 Order number Item 3/8 70690 5 1 7723 90 20 1/2 70700 1 1 7723 91 20 3/4 70710 0 1 7723 92 20 1 71490 0 1 7723 93 1 3/8 70790 2 1 7724 90 20 1/2 70800 8 1 7724 91 20 3/4 70810 7 1 7724 92 20 1 71500 6 1 7724 93 1 3/8 70890 9 1 7728 90 20 1/2 70900 5 1 7728 91 20 3/4 72110 6 1 7728 97 20 3/8 * 75410 4 1 7758 90 20 1/2 71040 7 1 7758 91 20 3/8 * 75460 9 1 7759 90 20 1/2 71070 4 1 7759 91 20 HERZ-TS-90-Thermostatic Valve Straight model Radiator connection with cone. Pipe connection with outside thread G 3/4 with cone. 1/2 73290 4 1 7733 81 20 HERZ-TS-90-Thermostatic Valve Angle model Radiator connection with cone. Pipe connection with outside thread G 3/4 with cone. 1/2 73110 5 1 7724 37 20 HERZ-TS-90-Thermostatic Valve Reverse angle Radiator connection with cone. Pipe connection with outside thread G 3/4 with cone. 1/2 71520 4 1 7748 91 20 HERZ-TS-90-Thermostatic Valve 3-Axis Valve “AB” Valve to the left of the radiator. Radiator connection with cone. Pipe connection with outside thread G 3/4 with cone. 1/2 71000 1 1 7745 91 20 HERZ-TS-90-Thermostatic Valve 3-Axis Valve “CD” Valve to the right of the radiator. Radiator connection with cone. Pipe connection with outside thread G 3/4 with cone. 1/2 71010 0 1 7746 91 20 HERZ-TS-90-Thermostatic Valve Straight model Special socket x external thread G 3/4 with cone. Universal models with special sockets for threaded pipes and compression adapters. 1/2 71510 5 1 7723 61 20 1/2 70930 2 1 7737 91 20 Model HERZ-TS-90-Thermostatic Valve Straight model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. Standard model with threaded socket. HERZ-TS-90-Thermostatic Valve Angle model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. Standard model with threaded socket. HERZ-TS-90-Thermostatic Valve Reverse angle Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-90-Thermostatic Valve 3-Axis Valve “AB” Valve to the left of the radiator. Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. HERZ-TS-90-Thermostatic Valve 3-Axis Valve “CD” Valve to the right of the radiator. Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. HERZ-TS-90-Thermostatic Valve Straight model 2 x external thread G 3/4 with cone. HERZ-TS-90-Thermostatic Valves universal models in straight and angle versions are also available according to DIN “D”. * Valve with socket, for threaded pipes only 24 Thermostatic Valves Product 1 group HERZ-TS-90-Thermostatic Valves “DE LUXE”, Universal EAN 90 04174 Order number Item 72310 0 1 7923 41 1 White (RAL 9010) 72340 7 1 7923 44 1 Matt black 72510 4 1 7923 49 1 HERZ-TS-90-Thermostatic Valve “DE LUXE” Angle model, chrome Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. 72350 6 1 7924 41 1 White (RAL 9010) 72380 3 1 7924 44 1 Matt black 72500 5 1 7924 49 1 HERZ-TS-90-Thermostatic Valve “DE LUXE” Reverse angle, chrome Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. 72710 8 1 7928 41 1 White (RAL 9010) 72740 5 1 7928 44 1 Matt black 72750 4 1 7928 49 1 HERZ-TS-90-Thermostatic Valve “DE LUXE” 3-Axis Valve “AB”, chrome Valve to the left of the radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. 72760 3 1 7958 41 1 White (RAL 9010) 72790 0 1 7958 44 1 Matt black 72800 6 1 7958 49 1 HERZ-TS-90-Thermostatic Valve “DE LUXE” 3-Axis Valve “CD”, chrome Valve to the right of the radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. 72810 5 1 7959 41 1 White (RAL 9010) 72840 2 1 7959 44 1 Matt black 72850 1 1 7959 49 1 Model Dim. HERZ-TS-90-Thermostatic Valve “DE LUXE” Straight model, chrome Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. 1/2 1/2 1/2 1/2 1/2 25 Thermostatic Valves Product 1 group HERZ-TS-90-Thermostatic Valves “DE LUXE”, Universal Model HERZ-TS-90-Thermostatic Valve “DE LUXE” Angle model, Colour Pergamum Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. Colour Aegean Colour Manhattan Colour Edelweiss Colour Calypso Colour Bahama beige Colour Greenwich Colour Jasmine Colour Natural Colour Ultramarine blue (RAL 5002) Colour Flame red (RAL 3000) Colour Ruby red (RAL 3003) Colour Signal blue (RAL 5005) Colour Golden yellow (RAL 1004) Colour Light ivory (RAL 1015) Dim. EAN 90 04174 Order number Item 1/2 73550 9 S 7924 01 1 1/2 73560 8 S 7924 02 1 1/2 73570 7 S 7924 03 1 1/2 73620 9 S 7924 04 1 1/2 73630 8 S 7924 05 1 1/2 73640 7 S 7924 06 1 1/2 73650 6 S 7924 07 1 1/2 73660 5 S 7924 08 1 1/2 73670 4 S 7924 09 1 1/2 73680 3 S 7924 10 1 1/2 73690 2 S 7924 11 1 1/2 73700 8 S 7924 12 1 1/2 73710 7 S 7924 13 1 1/2 73720 6 S 7924 14 1 1/2 73730 5 S 7924 15 1 Other designs, versions and dimensions are available upon request 26 Chrome Greenwich Matt black Jasmine White RAL 9010 Natural Pergamum Ultramarine blue RAL 5002 Aegean Flame red RAL 3001 Manhattan Ruby red RAL 3003 Edelweiss Signal blue RAL 5005 Calypso Golden yellow RAL 1004 Bahama beige Light ivory RAL 1015 Differences in colours due to printing reasons! Thermostatic Valves Product 1 group HERZ-TS-90-E-Thermostatic Valves with Reduced Resistance for One-Pipe Systems Model HERZ-TS-90-E-Thermostatic Valve Straight model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-90-E-Thermostatic Valve Angle model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-90-E-Thermostatic Valve Reverse angle Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-90-E-Thermostatic Valve 3-Axis Valve “AB” Valve to the left of the radiator. Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. HERZ-TS-90-E-Thermostatic Valve 3-Axis Valve “CD” Valve to the right of the radiator. Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. kvs Dim. EAN 90 04174 Order number Item 1.0 3/8 76700 5 1 7723 00 20 2.0 1/2 72000 0 1 7723 01 20 1.0 3/8 76710 4 1 7724 00 20 2.3 1/2 72080 2 1 7724 01 20 1.0 3/8 76720 3 1 7728 00 20 2.0 1/2 72020 8 1 7728 01 20 1.0 3/8 76730 2 1 7758 00 20 2.0 1/2 72420 6 1 7758 01 20 1.0 3/8 76740 1 1 7759 00 20 2.0 1/2 72430 5 1 7759 01 20 HERZ-TS-E-Thermostatic Valves with Maximum Flow Rate for One-Pipe and Gravity Installations HERZ-TS-E-Thermostatic Valve Straight model Standard model with threaded socket, radiator connection with cone. HERZ-TS-E-Thermostatic Valve Angle model Standard model with threaded socket, radiator connection with cone. HERZ-TS-E-Thermostatic Valve Reverse angle Standard model with threaded socket, radiator connection with cone. HERZ-TS-E-Thermostatic Valve Reverse angle, with air valve Standard model with threaded socket, radiator connection with cone. HERZ-TS-E-Thermostatic Valve Straight model 2 x external thread G 1 with flat seal. HERZ-TS-E-Thermostatic Valve Straight model 2 x external thread G 1 with flat seal, with nuts and 2 flat seals. HERZ-TS-E-Thermostatic Valve Straight model Socket x external thread G 1 with flat seal. 5.1 1/2 72010 9 1 7723 11 1 5.1 3/4 71980 6 1 7723 02 1 5.1 1 71950 9 1 7723 03 1 5.1 1/2 73380 2 1 7724 11 1 5.1 3/4 72090 1 1 7724 02 1 5.1 1 71960 8 1 7724 03 1 5.1 1/2 72030 7 1 7728 11 1 5.1 3/4 72040 6 1 7728 02 1 5.1 1 72100 7 1 7728 03 1 5.1 1/2 74300 9 1 7728 21 1 5.1 20 76160 7 1 7723 74 20 5.1 20 76150 8 1 7723 73 20 5.1 20 76140 9 1 7723 72 20 Dimensions are different with regard to HERZ-TS-90 Valves for identical sizes, For HERZ-RL-1-E return valves with maximum flow rate for one-pipe systems see page 38. 27 Thermostatic Valves Product 1 group HERZ-TS-90-Thermostatic valves TS-90, with fixed kv-values for heating installations Model HERZ-TS-90 Thermostatic Valve Straight model Dimension 3/8 Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-90 Thermostatic Valve Angle model Dimension 3/8 Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-90 Thermostatic Valve Angle model with elbow 90° Dimension 3/8 Radiator connector elbow 90° with cone.Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-90 Thermostatic Valve Reverse angle Dimension 3/8 Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-90 Thermostatic Valve 3-Axis Valve “AB” Dimension 3/8 Valve to the left of the radiator. Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. HERZ-TS-90 Thermostatic Valve 3-Axis Valve “CD” Dimension 3/8 Valve to the right of the radiator. Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. kv-m³/h EAN 90 04174 Order number Item 0.12 71550 1 1 7771 79 20 0.25 71560 0 1 7771 89 20 0.12 71600 3 1 7772 79 20 0.25 71610 2 1 7772 89 20 0.12 71170 1 1 7777 79 20 0.25 71180 0 1 7777 89 20 0.12 74880 6 1 7778 79 20 0.25 74890 5 1 7778 89 20 0.12 75910 9 1 7758 79 20 0.25 75920 8 1 7758 89 20 0.12 75950 5 1 7759 79 20 0.25 75960 4 1 7759 89 20 HERZ-TS-90-Thermostatic valves TS-90 with fixed kv-values for heating installations HERZ-TS-90 Thermostatic Valve Straight model Dimension 3/4 Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-90 Thermostatic Valve Angle model Dimension 3/4 Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-90 Thermostatic Valve Angle model with elbow 90 °C Dimension 3/4 Radiator connector with elbow 90 °C with cone.Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-90 Thermostatic Valve Reverse angle Dimension 3/4 Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. 28 0.12 77061 6 1 7671 79 20 0.25 77062 3 1 7671 89 20 0.12 77071 5 1 7672 79 20 0.25 77072 2 1 7672 89 20 0.12 77091 3 1 7677 79 20 0.25 77092 0 1 7677 89 20 0.12 77081 4 1 7675 79 20 0.25 77082 1 1 7675 89 20 3/8 3/4 Thermostatic Valves Product 1 group HERZ-TS-90-Thermostatic valve with fixed values of kv for district heating Model HERZ-TS-90 Thermostatic Valve Straight model Dimension 1/2 Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-90 Thermostatic Valve Angle model Dimension 1/2 Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-90 Thermostatic Valve Angle model with elbow 90 °C Dimension 1/2 Radiator connector with elbow 90 °C with cone.Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-90 Thermostatic Valve Reverse angle Dimension 1/2 Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-90 Thermostatic Valve 3-Axis Valve “AB” Dimension 1/2 Valve to the left of the radiator. Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. HERZ-TS-90 Thermostatic Valve 3-Axis Valve “CD” Dimension 1/2 Valve to the right of the radiator. Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. 1/2 kv Dim. m³/h EAN 90 04174 Order number Item 0.12 1/2 70340 9 1 7713 79 20 0.25 1/2 70350 8 1 7713 89 20 0.12 1/2 70390 4 1 7714 79 20 0.25 1/2 70400 0 1 7714 89 20 0.12 1/2 70440 6 1 7715 79 20 0.25 1/2 70450 5 1 7715 89 20 0.12 1/2 70600 4 1 7718 79 20 0.25 1/2 70610 3 1 7718 89 20 0.12 1/2 70500 7 1 7716 79 20 0.25 1/2 70510 6 1 7716 89 20 0.12 1/2 70550 2 1 7717 79 20 0.25 1/2 70560 1 1 7717 89 20 HERZ-TS-FV Thermostatic Valve with Fine 6 Position Pre-Setting and Readout 1/2 HERZ-TS-FV Thermostatic Valve Straight model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. 0.39 1/2 73580 6 1 7523 67 20 HERZ-TS-FV Thermostatic Valve Angle model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. 0.39 1/2 73590 5 1 7524 67 20 HERZ-TS-FV Thermostatic Valves Reverse Angle Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. 0.39 1/2 74920 9 1 7528 67 20 29 Thermostatic Valves Product 1 group HERZ-TS-98-V Thermostatic Valves with Continuous Pre-Setting and Readout Dim. EAN 90 04174 Order number Item HERZ-TS-98-V-Thermostatic Valve Straight model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. 3/8 72550 0 1 7623 65 20 1/2 72570 8 1 7623 67 20 3/4 74840 0 1 7623 69 20 HERZ-TS-98-V-Thermostatic Valve Angle model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. 3/8 72600 2 1 7624 65 20 1/2 72620 0 1 7624 67 20 3/4 74850 9 1 7624 69 20 3/8 72640 8 1 7628 65 20 1/2 72650 7 1 7628 67 20 HERZ-TS-98-V-Thermostatic Valve 3-Axis Valve “AB” Valve to the left of the radiator. Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. 1/2 72680 4 1 7658 67 20 HERZ-TS-98-V-Thermostatic Valve 3-Axis Valve “CD” Valve to the right of the radiator. Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. 1/2 72690 3 1 7659 67 20 1/2 73480 9 1 7633 67 20 1/2 73510 3 1 7638 67 20 1/2 72670 5 1 7648 67 20 HERZ-TS-98-V-Thermostatic Valve 3-Axis Valve “AB” Valve to the left of the radiator. Radiator connection with cone. Pipe connection with external thread G 3/4 with cone. 1/2 73970 5 1 7645 67 20 HERZ-TS-98-V-Thermostatic Valve 3-Axis Valve “CD” Valve to the right of the radiator. Radiator connection with cone. Pipe connection with external thread G 3/4 with cone. 1/2 73980 4 1 7646 67 20 HERZ-TS-98-V-Thermostatic Valve Straight model Special socket x external thread G 3/4 with cone. Universal models with special sockets for threaded pipes and compression adapters. 1/2 73460 1 1 7623 71 20 1/2 72660 6 1 7637 67 20 Model HERZ-TS-98-V-Thermostatic Valve Reverse angle Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-98-V-Thermostatic Valve Straight model Radiator connection with cone. Pipe connection with external thread G 3/4 with cone. HERZ-TS-98-V-Thermostatic Valve Angle model Radiator connection with cone. Pipe connection with external thread G 3/4 with cone. HERZ-TS-98-V-Thermostatic Valve Reverse angle Radiator connection with cone. Pipe connection with external thread G 3/4 with cone. HERZ-TS-98-V-Thermostatic Valve Straight model 2 x external thread G 3/4 with cone. HERZ-TS-98-V-Universal in straight and angle versions are also avaliable according to DIN “D”. 30 Thermostatic Valves Product 1 group HERZ-TS-90-V Thermostatic Valves with Continuous, Concealed Pre-Settings Dim. EAN 90 04174 Order number Item HERZ-TS-90-V-Thermostatic Valve Straight model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. 3/8 70630 1 1 7723 65 20 1/2 70650 9 1 7723 67 20 3/4 70670 7 1 7723 69 20 HERZ-TS-90-V-Thermostatic Valve Angle model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. 3/8 70750 6 1 7724 65 20 1/2 70770 4 1 7724 67 20 3/4 74830 1 1 7724 69 20 3/8 70870 1 1 7728 65 20 1/2 70880 0 1 7728 67 20 HERZ-TS-90-V-Thermostatic Valve 3-Axis Valve “AB” Valve to the left of the radiator. Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. 1/2 71030 8 1 7758 67 20 HERZ-TS-90-V-Thermostatic Valve 3-Axis Valve “CD” Valve to the right of the radiator. Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. 1/2 71060 5 1 7759 67 20 1/2 73420 5 1 7733 67 20 1/2 73450 2 1 7738 67 20 1/2 71510 5 1 7748 67 20 HERZ-TS-90-V-Thermostatic Valve 3-Axis Valve “AB” Valve to the left of the radiator. Radiator connection with cone. Pipe connection with external thread G 3/4 with cone. 1/2 73950 7 1 7745 67 20 HERZ-TS-90-V-Thermostatic Valve 3-Axis Valve “CD” Valve to the right of the radiator. Radiator connection with cone. Pipe connection with external thread G 3/4 with cone. 1/2 73960 6 1 7746 67 20 HERZ-TS-90-V-Thermostatic Valve Straight model Special socket x external thread G 3/4 with cone. Universal models with special sockets for threaded pipes and compression adapters. 1/2 70680 6 1 7723 71 20 1/2 70920 3 1 7737 67 20 Model HERZ-TS-90-V-Thermostatic Valve Reverse angle Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-90-V-Thermostatic Valve Straight model Radiator connection with cone. Pipe connection with external thread G 3/4 with cone. HERZ-TS-90-V-Thermostatic Valve Angle model Radiator connection with cone. Pipe connection with external thread G 3/4 with cone. HERZ-TS-90-V-Thermostatic Valve Reverse angle Radiator connection with cone. Pipe connection with external thread G 3/4 with cone. HERZ-TS-90-V-Thermostatic Valve Straight model 2 x special socket G 3/4 with cone. HERZ-TS-90-V-Universal in straight and angle versions are also avaliable according to DIN “D”. 31 Thermostatic Valves Product 1 group HERZ-Bi-Directional Flow Thermostatic Valves Model Thermostatic Valves with “Mini” Sensor Angle model Valve can be installed as either standard angle or reverse angle pattern with 15, 10 and 8 mm copper connection, plastic pipe connections available. Double integrity metal to metal and “O”-ring seal tail piece connection. Return Valves with Knurled Cap Angle model Valve available with 15, 10 and 8 mm copper connection, plastic pipe connections available. Double integrity metal to metal and “O”-ring seal tail piece connection. Thermostatic Valves with Hand Wheel Angle model Valve can be installed as either standard angle or reverse angle pattern with 15, 10 and 8 mm copper connection, plastic pipe connections available. Double integrity metal to metal and “O”-ring seal tail piece connection. Can be converted to a TRV by swapping the head Return Valves with Deluxe Cap Angle model Valve available with 15, 10 and 8 mm copper connection, plastic pipe connections available. Double integrity metal to metal and “O”-ring seal tail piece connection. Option with HERZ Standard Head Angle model Valve can be installed as either standard angle or reverse angle pattern with 15 mm copper connection, plastic pipe connections available. Double integrity metal to metal and “O”-ring seal tail piece connection. Return Valves with Knurled Cap & Drain off Angle model Valve available with 15 mm copper connection, plastic pipe connections available. Drain valve incorporated into tail piece. For replacement insert 6390 see page 46 32 Dim. EAN 90 04174 Order number Item 15 mm 74060 2 1 7734 33 20 10 mm 74390 0 1 7734 31 20 8 mm 74400 6 1 7734 38 20 15 mm 32300 3 1 3734 15 20 10 mm 32310 2 1 3734 10 20 8 mm 32320 1 1 3734 08 20 15 mm 74360 3 1 7834 15 20 10 mm 74370 2 1 7834 10 20 8 mm 74380 1 1 7834 08 20 15 mm ohne 1 3734 30 20 10 mm 32330 0 1 3734 31 20 8 mm 32340 9 1 3734 38 20 15 mm 74410 5 1 7736 15 20 1 3734 25 20 15 mm Thermostatic Valves Product 1 group HERZ-TS-90-Thermostatic Valves Dim. EAN 90 04174 Order number Item Herz-TS-90-Thermostatic Valve Reverse angle Direct connection to the radiator, self-sealing by means of Teflon ring. Threaded pipe connection. M 22 x 1.5 Compression adapter for pipe connection to be ordered separately. 1/2 x M 22 x 1.5 70990 6 1 7742 91 20 HERZ-RL-5-Return Valve Angle model Direct connection to the radiator, self-sealing by means of Teflon ring. Threaded pipe connection M 22 x 1.5. Compression adapter for pipe connection to be ordered separately 1/2 x M 22 x 1.5 30170 4 1 3942 01 20 HERZ-TS-98-V-Thermostatic Valve with continuous pre-setting and readout, straight model with air bleed, 2 x external thread G 3/4 with cone 1/2 76240 6 1 7637 68 20 HERZ-TS-98-V-Thermostatic Valve with continuous pre-setting and readout, 3-axis valve “AB” with air bleed, 2 x external thread G 3/4 1/2 73220 1 1 7645 68 20 HERZ-TS-98-V-Thermostatic Valve with continuous pre-setting and readout, 3-axis valve “CD” with air bleed, 2 x external thread G 3/4 1/2 73230 0 1 7646 68 20 Kvs DN EAN 90 04174 Order number Item 3.62 20 76180 5 1 7724 21 20 1.92 15 76500 0 1 7724 38 20 Model HERZ-TS-98-Thermostatic Valves HERZ-TS-Thermostatic Valves - Special Models Model HERZ-TS-E-Thermostatic Valve Angle model 2 x external thread G 1 with flat seal. HERZ-TS-90-Thermostatic Valve Angle model 2 x external thread G 3/4 with flat seal. 33 Thermostatic Valves Product 1 group HERZ-TS-90-H-Thermostatic Valves M 30 x 1.5 Model HERZ-TS-90-H-Thermostatic Valve Straight model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-90-H-Thermostatic Valve Angle model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-90-H-Thermostatic Valve Reverse angle Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-90-H-Thermostatic Valve 3-Axis Valve “AB” Valve to the left of the radiator. Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. HERZ-TS-90-H-Thermostatic Valve 3-Axis Valve “CD” Valve to the right of the radiator. Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. HERZ-TS-90-H-Thermostatic Valve Straight model Radiator connection with cone. Pipe connection with outside thread G 3/4 with cone. HERZ-TS-90-H-Thermostatic Valve Angle model Radiator connection with cone. Pipe connection with outside thread G 3/4 with cone. HERZ-TS-90-H-Thermostatic Valve Reverse angle Radiator connection with cone. Pipe connection with outside thread G 3/4 with cone. HERZ-TS-90-H-Thermostatic Valve 3-Axis Valve “AB” Valve to the left of the radiator. Radiator connection with cone. Pipe connection with outside thread G 3/4 with cone. HERZ-TS-90-H-Thermostatic Valve Straight model Special socket x external thread G 3/4 with cone. Universal models with special sockets for threaded pipes and compression adapters. 34 Dim. EAN 90 04174 Order number Item 1/2 74510 2 1 7723 26 20 1/2 74520 1 1 7724 26 20 1/2 74530 0 1 7728 26 20 1/2 74590 0 1 7758 26 20 1/2 74600 0 1 7759 26 20 1/2 74540 9 1 7733 26 20 1/2 74550 8 1 7734 26 20 1/2 74570 6 1 7738 26 20 1/2 74580 5 1 7745 26 20 1/2 75460 7 1 7746 26 20 Thermostatic Valves Product 1 group HERZ-TS-98-VH-Thermostatic Valves M 30 x 1.5 with Continuous Pre-Setting and Readout Model HERZ-TS-98-VH-Thermostatic Valve Straight model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-98-VH-Thermostatic Valve Angle model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-98-VH-Thermostatic Valve Reverse angle Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. HERZ-TS-98-VH-Thermostatic Valve 3-Axis Valve “AB” Valve to the left of the radiator. Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. HERZ-TS-98-VH-Thermostatic Valve 3-Axis Valve “CD” Valve to the right of the radiator. Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. HERZ-TS-98-VH-Thermostatic Valve Straight model Radiator connection with cone. Pipe connection with external thread G 3/4 with cone. HERZ-TS-98-VH-Thermostatic Valve Angle model Radiator connection with cone. Pipe connection with external thread G 3/4 with cone. HERZ-TS-98-VH-Thermostatic Valve Reverse angle Radiator connection with cone. Pipe connection with external thread G 3/4 with cone. HERZ-TS-98-VH-Thermostatic Valve 3-Axis Valve “AB” Valve to the left of the radiator. Radiator connection with cone. Pipe connection with external thread G 3/4 with cone. HERZ-TS-98-VH-Thermostatic Valve 3-Axis Valve “CD” Valve to the right of the radiator. Radiator connection with cone. Pipe connection with external thread G 3/4 with cone. Dim. EAN 90 04174 Order number 1/2 75530 9 1 7623 26 1/2 75540 8 1 7624 26 1/2 75550 7 1 7628 26 DN 15 75600 9 1 7658 26 DN 15 75610 8 1 7659 26 1/2 ohne 1 7633 26 1/2 75560 6 1 7634 26 1/2 75570 5 1 7638 26 1/2 75580 4 1 7645 26 1/2 75590 3 1 7646 26 Item 35 Return Valves Product 1 group HERZ-RL-5-Return Valves with Pre-Setting Dim. EAN 90 04174 Order number Item HERZ-RL-5-Return Valve Straight model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. Dimensions according DIN 3832, series 1, DARE-Ms-K. 3/8 30090 5 1 3923 00 20 1/2 30100 1 1 3923 01 20 3/4 30110 0 1 3923 02 20 HERZ-RL-5-Return Valve Angle model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. Dimensions according DIN 3842, series 1, EARE Ms-K. 3/8 30130 8 1 3924 00 20 1/2 30140 7 1 3924 01 20 3/4 30150 6 1 3924 02 20 1/2 30330 2 1 3937 11 20 1/2 30190 2 1 3948 11 20 1/2 30120 9 1 3923 11 20 1/2 31050 8 1 3937 01 20 1/2 30160 5 1 3924 11 20 1/2 30180 3 1 3948 01 20 Model HERZ-RL-5-Return Valve Straight model Radiator connection with cone. Pipe connection with external thread G 3/4 with cone seal. HERZ-RL-5-Return Valve Angle model Radiator connection with cone. Pipe connection with external thread G 3/4 with cone seal. HERZ-RL-5-Return Valve Straight model Special socket x external thread G 3/4 with cone seal. Universal models with special sockets for threaded pipes and compression adapters. HERZ-RL-5-Return Valve Straight model 2 x external thread G 3/4 with cone seal. HERZ-RL-5-Return Valve Angle model Special socket x external thread G 3/4 with cone seal. Universal models with special sockets for threaded pipes and compression adapters. HERZ-RL-5-Return Valve Angle model 2 x external thread G 3/4 with cone seal. 36 Return Valves Product 1 group HERZ-RL-1-Return Valves Dim. EAN 90 04174 Order number Item HERZ-RL-1-Return Valve Straight model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. 3/8 30020 2 1 3723 40 20 1/2 30030 1 1 3723 41 20 3/4 30040 0 1 3723 42 20 HERZ-RL-1-Return Valve Angle model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. 3/8 30050 9 1 3724 40 20 1/2 30060 8 1 3724 41 20 3/4 30070 7 1 3724 42 20 HERZ-RL-1-Return Valve Straight model Radiator connection with cone. Pipe connection with external thread G 3/4 with cone seal. 1/2 31410 0 1 3733 11 20 HERZ-RL-1-Return Valve Angle model Radiator connection with cone. Pipe connection with external thread G 3/4 with cone seal. 1/2 31420 9 1 3748 01 20 HERZ-RL-1-Return Valve Straight model Special socket x external thread G 3/4 with cone. Universal models with special sockets for threaded pipes and compression adapters. 1/2 30010 3 1 3723 11 20 HERZ-RL-1-Return Valve Angle model Special socket x external thread G 3/4 with cone seal. Universal models with special sockets for threaded pipes and compression adapters. 1/2 31470 4 1 3724 71 20 HERZ-RL-1-Return Valve Straight model 2 x external socket G 3/4 with cone seal. 1/2 30080 6 1 3737 01 20 HERZ-RL-1-Return Valve Angle model 2 x external socket G 3/4 with cone seal. 1/2 31480 3 1 3724 37 20 Model HERZ-RL-1-E-Return Valves with Maximum Flow Rate for One-Pipe and Gravity Installations HERZ-RL-1-E-Return Valve Straight model Radiator connection with cone. Standard model with threaded socket. HERZ-RL-1-E-Return Valve Angle model Radiator connection with cone. Standard model with threaded socket. 1/2 31430 8 1 3723 01 1 3/4 31440 7 1 3723 02 1 1 31400 1 1 3723 03 1 1/2 31450 6 1 3724 01 1 3/4 31460 5 1 3724 02 1 1 31390 5 1 3724 03 1 37 Return Valves Product 1 group HERZ-Return Valves “DE LUXE”, Universal with pre-setting by limitation of valve lift EAN 90 04174 Order number Item 30850 5 1 3725 41 1 White (RAL 9010) 30880 2 1 3725 44 1 Matt black 31080 5 1 3725 49 1 HERZ-Return Valve “DE LUXE” Angle Model, chrome Radiator connection with cone, Universal models with special sockets for threaded pipes and compression adapters. 30890 1 1 3726 41 1 White (RAL 9010) 30920 5 1 3726 44 1 Matt black 31090 4 1 3726 49 1 Model Dim. HERZ-Return Valve “DE LUXE” Straight Model, chrome Radiator connection with cone, Universal models with special sockets for threaded pipes and compression adapters. 1/2 1/2 HERZ-Return Valves “DE LUXE”, Universal with pre-setting by limitation of valve lift HERZ-Return Valve “DE LUXE” Angle Model, Colour Pergamum Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapters. 1/2 31530 5 S 3726 01 1 Colour Aegean 1/2 31540 4 S 3726 02 1 Colour Manhattan 1/2 31550 3 S 3726 03 1 Colour Edelweiss 1/2 31560 2 S 3726 04 1 Colour Calypso 1/2 31570 1 S 3726 05 1 Colour Bahama beige 1/2 31580 0 S 3726 06 1 Colour Greenwich 1/2 31590 9 S 3726 07 1 Colour Jasmine 1/2 31600 5 S 3726 08 1 Colour Natural 1/2 31610 4 S 3726 09 1 Colour Ultramarine blue (RAL 5002) 1/2 31620 3 S 3726 10 1 Colour Flame red (RAL 3000) 1/2 31630 2 S 3726 11 1 Colour Ruby red (RAL 3003) 1/2 31640 1 S 3726 12 1 Colour Signal blue (RAL 5005) 1/2 31650 0 S 3726 13 1 Colour Golden yellow (RAL 1004) 1/2 31660 9 S 3726 14 1 Colour Light ivory (RAL 1015) 1/2 31670 8 S 3726 15 1 Other dimensions are available upon request Chrome Greenwich Matt black Jasmine White RAL 9010 Natural Pergamon Ultramarine blue RAL 5002 Aegean Flame red RAL 3000 Manhattan Ruby red RAL 3003 Edelweiss Signal blue RAL 5005 Calypso Golden yellow RAL 1004 Bahama Beige Light ivory RAL 1015 Differences in colours due to printing reasons! 38 Radiator Control Valves Product 1 group HERZ-DR-T-90-Radiator Control Valves Accurate pre-setting by secondary flow restriction cone Model HERZ-DR-T-90-Radiator Control Valve Straight model Radiator connection with cone. Universal models with special sockets for threaded pipe and compression adapter. HERZ-DR-T-90-Radiator Control Valve Straight model Standard model with threaded socket. HERZ-DR-T-90-Radiator Control Valve Angle model Radiator connection with cone. Universal models with special sockets for threaded pipe and compression adapter. HERZ-DR-T-90-Radiator Control Valve Angle model Standard model with threaded socket. HERZ-DR-T-90-Radiator Control Valve Straight model Radiator connection with cone. Pipe connection with external thread G 3/4 with cone seal. HERZ-DR-T-90-Radiator Control Valve Angle model Radiator connection with cone. Pipe connection with external thread G 3/4 with cone seal. HERZ-DR-T-90-Radiator Control Valve Straight model Special socket x external thread G 3/4 with cone seal. Universal models with special sockets for threaded pipes and compression adapters. Dim. EAN 90 04174 Order number Item 3/8 62000 3 1 6823 90 20 1/2 62010 2 1 6823 91 20 3/4 62020 1 1 6823 92 20 1 61940 3 1 6823 73 1 1¼ 61950 2 1 6823 74 1 3/8 62100 0 1 6824 90 20 1/2 62110 9 1 6824 91 20 3/4 62120 8 1 6824 92 20 1 62040 9 1 6824 73 1 1¼ 62050 8 1 6824 74 1 1/2 63550 2 1 6833 81 20 1/2 63560 1 1 6848 01 20 1/2 61930 4 1 6823 71 20 1/2 62140 6 1 6837 91 20 3/8 61960 1 1 6823 80 20 1/2 61970 0 1 6823 81 1 3/4 61980 9 1 6823 82 1 1 61990 8 1 6823 86 1 3/8 62060 7 1 6824 80 20 1/2 62070 6 1 6824 81 1 3/4 62080 5 1 6824 82 1 1 62090 4 1 6824 86 1 HERZ-DR-T-90-Radiator Control Valve Straight model 2 x external socket G 3/4 with cone seal. HERZ-DR-T-90-Radiator Control Valves with Lockshield Cap HERZ-DR-T-90-Radiator Control Valve with Lockshield Cap Straight model Radiator connection with cone. Universal models with special sockets for threaded pipe and compression adapter. Standard model with threaded socket. HERZ-DR-T-90-Radiator Control Valve with Lockshield Cap Angle model Radiator connection with cone. Universal models with special sockets for threaded pipe and compression adapter. Standard model with threaded socket. 39 Radiator Control Valves Product 1 group HERZ-GP-Radiator Control Valves with pre-setting by limitation of valve lift Model HERZ-GP-Radiator Control Valve Straight model Radiator connection with cone seal. Universal models with special sockets for threaded pipe and compression adapter. HERZ-GP-Radiator Control Valve Angle model Radiator connection with cone seal. Universal models with special sockets for threaded pipe and compression adapter. HERZ-GP-Radiator Control Valve Straight model Special socket x external thread G 3/4 with cone seal. Universal models with special sockets for threaded pipes and compression adapters. Dim. EAN 90 04174 Order number Item 3/8 50030 5 1 5523 20 20 1/2 50040 4 1 5523 21 20 3/4 50050 3 1 5523 22 20 3/8 50120 3 1 5524 20 20 1/2 50130 2 1 5524 21 20 3/4 50140 1 1 5524 22 20 1/2 50070 1 1 5523 71 20 1/2 50190 6 1 5537 01 20 1/2 50310 8 1 5537 11 20 1/2 50330 6 1 5548 01 20 3/8 50000 8 1 5523 10 20 1/2 50010 7 1 5523 11 20 3/4 50020 6 1 5523 12 20 3/8 50090 9 1 5524 10 20 1/2 50100 5 1 5524 11 20 3/4 50110 4 1 5524 12 20 HERZ-GP-Radiator Control Valve Straight model 2 x external socket G 3/4 with cone seal. HERZ-GP-Radiator Control Valve Straight model Radiator connection with cone seal. Pipe connection with external thread G 3/4 with cone seal. HERZ-GP-Radiator Control Valve Angle model Radiator connection with cone seal. Pipe connection with external thread G 3/4 with cone seal. HERZ-GP-Radiator Control Valves with Lockshield Cap HERZ-GP-Radiator Control Valve with Lockshield Cap Straight model Radiator connection with cone seal. Universal models with special sockets for threaded pipe and compression adapter. HERZ-GP-Radiator Control Valve with Lockshield Cap Angle model Radiator connection with cone seal. Universal models with special sockets for threaded pipe and compression adapter. 40 HERZ-3000 Connection System for Radiators with Integrated Valves Product 1 group HERZ-3000 Bypass Bodies for One-Pipe Systems with Integrated Thermostatic Valves Dim. EAN 90 04174 Order number Item HERZ-3000 Bypass Body with Integrated Thermostatic Valve Straight model for one-pipe system. Connection branch-distance between centres is 50 mm, radiator connection G 3/4 with cone seal, freely moving nut. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters have to be ordered separately. G 3/4 30800 0 1 3791 92 10 HERZ-3000 Bypass Body with Integrated Thermostatic Valve Straight model for one-pipe system. Connection branch-distance between centres is 50 mm, radiator connection R 1/2, freely moving nut, 2 connection nipples are included. Radiator connection with external thread G 3/4, with cone seal, for compression adapter. Compression adapters have to be ordered separately. Rp 1/2 x G 3/4 30790 4 1 3792 92 10 HERZ-3000 Bypass Body with Integrated Thermostatic Valve Straight model for one-pipe system. Connection branch-distance between centres is 50 mm, radiator connection G 3/4 with cone seal, freely moving nut. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters have to be ordered separately. G 3/4 31840 5 1 3793 92 10 HERZ-3000 Bypass Body with Integrated Thermostatic Valve Straight model for one-pipe system. Connection branch-distance between centres is 50 mm, radiator connection R 1/2, freely moving nut, 2 connection nipples are included. Radiator connection with external thread G 3/4, with cone seal, for compression adapter. Compression adapters have to be ordered separately. Rp 1/2 x G 3/4 31860 3 1 3794 92 10 Model HERZ-TS-3000 Connection Elements for Two-Pipe Systems with Integrated Thermostatic Valves Thermostatic Upper Part with direct pre-setting and readout HERZ-3000 Connection Element with pre-setable thermostatic upper part Straight model for two-pipe system. Connection branch-distance between centres is 50 mm, radiator connection G 3/4 with cone seal, freely moving nut. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters are to be ordered separately. G 3/4 32200 6 1 3691 91 10 HERZ-3000 Connection Element with pre-setable thermostatic upper part Straight model for two-pipe system. Connection branch-distance between centres is 50 mm, radiator connection R 1/2, freely moving nut, 2 connection nipples are included. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters have to be ordered separately. Rp 1/2 x G 3/4 32210 5 1 3692 91 10 HERZ-3000 Connection Element with pre-setable thermostatic upper part Angle model for two-pipe system. Connection branch-distance between centres is 50 mm, radiator connection G 3/4 with cone seal, freely moving nut. Radiator connection with external thread G 3/4, with cone seal, for compression adapter. Compression adapters have to be ordered separately. G 3/4 32220 4 1 3693 91 10 HERZ-3000 Connection Element with pre-setable thermostatic upper part Angle model for two-pipe system. Connection branch-distance between centres is 50 mm, radiator connection R 1/2, freely moving nut, 2 connection nipples are included. Radiator connection with external thread G 3/4, with cone seal, for compression adapter. Compression adapters have to be ordered separately. Rp 1/2 x G 3/4 32230 3 1 3694 91 10 41 HERZ-3000 Connection System for Radiators with Integrated Valves Product 1 group HERZ-TS-3000-Bypass Bodies with Integrated Thermostatic Valves M 30 x 1.5 Model HERZ-3000 Connection Element with pre-setable thermostatic upper part Straight model for two-pipe system. Connection branch-distance between centres is 50 mm, radiator connection R 1/2, freely moving nut, 2 connection nipples are included. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters have to be ordered separately. HERZ-3000 Connection Element with pre-setable thermostatic upper part Straight model for one-pipe system. Connection branch-distance between centres is 50 mm, radiator connection R 1/2, freely moving nut, 2 connection nipples are included. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters have to be ordered separately. HERZ-3000 Connection Element with pre-setable thermostatic upper part Angle model for two-pipe system. Connection branch-distance between centres is 50 mm, radiator connection R 1/2, freely moving nut, 2 connection nipples are included. Radiator connection with external thread G 3/4, with cone seal, for compression adapter. Compression adapters have to be ordered separately. HERZ-3000 Connection Element with pre-setable thermostatic upper part Angle model for one-pipe system. Connection branch-distance between centres is 50 mm, radiator connection R 1/2, freely moving nut, 2 connection nipples are included. Radiator connection with external thread G 3/4, with cone seal, for compression adapter. Compression adapters have to be ordered separately. 42 Dim. EAN 90 04174 Order number Item Rp 1/2 x G 3/4 - 1 3798 91 10 Rp 1/2 x G 3/4 - 1 3798 92 10 Rp 1/2 x G 3/4 - 1 3799 91 10 Rp 1/2 x G 3/4 - 1 3799 92 10 HERZ-Thermostatic Inserts Product 1 group HERZ-Thermostatic Inserts for Radiators FWW Model ERZ-Thermostatic Inserts for Radiators Manufacturer Vogel & Noot. HERZ-Thermostatic Inserts for Radiators with a fixed value kv Manufacturer Stelrad & Korado. Dim. EAN 90 04174 Order number Item kv 0.06 32870 1 1 3093 69 20 kv 0.12 32880 0 1 3093 79 20 kv 0.25 32890 9 1 3093 89 20 kv 0.5 32900 5 1 3093 99 20 kv 0.06 32910 4 1 3192 82 20 kv 0.12 32920 3 1 3192 83 20 kv 0.25 32930 2 1 3192 84 20 kv 0.5 32940 1 1 3192 85 20 HERZ-Thermostatic Inserts for Radiators with Integrated Valves M 28 x 1.5 HERZ-Thermostatic Inserts TS-98-V for Radiators (Purmo, Dia Norm, Radson, Superia, Veha), with pre-setting. 1/2 33050 6 1 3091 98 20 HERZ-Einschraubventil TS-98-V for Radiators (Henrad, Korado, Stelrad), with pre-setting. 1/2 33060 5 1 3192 98 20 HERZ-Thermostatic Inserts TS-98-V for Radiators (Vogel&Noot), with pre-setting. 1/2 32370 6 1 3093 98 20 HERZ-Thermostatic Inserts TS-98-V for Radiators (ThermoTeknik, Acova, Brugmann), with pre-setting. 1/2 32960 9 1 3095 98 20 HERZ-Thermostatic Inserts for Radiators (Kermi), with pre-setting 1/2 33070 4 1 3197 98 20 HERZ-Thermostatic Inserts TS-98-V for Radiators (Dunaferr), with pre-setting. 1/2 32630 1 1 3192 03 20 HERZ-Thermostatic Inserts for Radiators with Integrated Valves M 30 x 1.5 HERZ-Thermostatic Inserts for Radiators(Acova) with Intergrated Valves Continuous precise pre-setting various lengths according to radiator connection design. 1/2 32970 8 1 3295 98 1 HERZ-Thermostatic Inserts TS-98-V for Radiators(Dunaferr) with Intergrated Valves Continuous precise pre-setting various lengths according to radiator connection design. 1/2 32640 0 1 3292 03 20 * Please note that the manufacturer-related Integrated valve inserts has been extensively revised, and the information provided here is appropriate at the time of radiator models in Austria. Subject to change at any time. 43 HERZ-3000 Connection System for Radiators with Integrated Valves Product 1 group HERZ-3000 Connection Elements for Two-Pipe Systems Dim. EAN 90 04174 Order number Item “PROJEKT” Connection Element Straight model Connection branch-distance between centres is 50 mm, radiator connection G 3/4, freely moving nut. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters have to be ordered separately. G 3/4 32250 1 3 3021 01 100 “PROJEKT” Connection Element Angle model Connection branch-distance between centres is 50 mm, radiator connection G 3/4, freely moving nut. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters have to be ordered separately. G 3/4 32260 0 3 3021 02 100 “PROJEKT” Connection Element Straight model Connection branch-distance between centres is 50 mm, radiator connection G 3/4, freely moving nut. 2 connecting nipples 1 3002 31 are included. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters have to be ordered separately. Rp 1/2 x G 3/4 33130 5 3 3021 11 100 “PROJEKT” Connection Element Angle model Connection branch-distance between centres is 50 mm, radiator connection G 3/4, freely moving nut. 2 connecting nipples 1 3002 31 are included. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters have to be ordered separately. Rp 1/2 x G 3/4 33140 4 3 3021 12 100 Model 44 G 3/4 HERZ-3000 Connection System for Radiators with Integrated Valves Product 1 group HERZ-3000 Connection Elements for Two-Pipe Systems G 3/4 With shutoff, draining and filling functions on both sides, radiator connection G 3/4 Dim. EAN 90 04174 Order number Item HERZ-3000-Connection Element Straight model Connection branch-distance between centres is 50 mm, radiator connection G 3/4, freely moving nut. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters have to be ordered separately. G 3/4 32010 1 1 3466 01 10 HERZ-3000-Connection Element Angle model Connection branch-distance between centres is 50 mm, radiator connection G 3/4, freely moving nut. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters have to be ordered separately. G 3/4 32030 9 1 3466 11 10 Model Rp 1/2 With shutoff, draining and filling functions on both sides, radiator connection Rp 1/2 HERZ-3000-Connection Element Straight model Connection branch-distance between centres is 50 mm, radiator connection R 1/2, freely moving nut, 2 connection nipples 1 3002 31 are included. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters have to be ordered separately. Rp 1/2 x G 3/4 32020 0 1 3466 02 10 HERZ-3000-Connection Element Angle model Connection branch-distance between centres is 50 mm, radiator connection Rp 1/2, freely moving nut, 2 connection nipples 1 3002 31 are included. Radiator connection with external thread G 3/4, with cone seal for compression adapter connection. Compression adapters have to be ordered separately. Rp 1/2 x G 3/4 32040 8 1 3466 12 10 G 3/4 With shutoff function on both sides, operation from front, radiator connection G 3/4 HERZ-3000-Connection Element Straight model Connection branch-distance between centres is 50 mm, radiator connection G 3/4, freely moving nut. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters have to be ordered separately. G 3/4 31890 0 1 3766 01 10 HERZ-3000-Connection Element Angle model Connection branch-distance between centres is 50 mm, radiator connection G 3/4, freely moving nut. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters have to be ordered separately. G 3/4 31910 5 1 3766 11 10 Rp 1/2 With shutoff functions on both sides, operation from front, radiator connection Rp 1/2 HERZ-3000-Connection Element Straight model Connection branch-distance between centres is 50 mm, radiator connection Rp 1/2, freely moving nut, 2 connection nipples are included. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters have to be ordered separately. Rp 1/2 x G 3/4 31900 6 1 3766 02 10 HERZ-3000-Connection Element Angle model Connection branch-distance between centres is 50 mm, radiator connection Rp 1/2, freely moving nut, 2 connection nipples are included. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Rp 1/2 x G 3/4 31920 4 1 3766 12 10 45 HERZ-3000 Connection System for Radiators with Integrated Valves Product 1 group HERZ-3000 Bypass Bodies for One or Two-Pipe Systems G 3/4 With pre-setting, shutoff, draining and filling functions Dim. EAN 90 04174 Order number Item G 3/4 32080 4 1 3066 01 10 HERZ-3000 Bypass Body Angle model, left-side draining Connection branch-distance between centres is 50 mm, radiator connection G 3/4 with cone seal, freely moving nut. Radiator connection with external thread G 3/4, with cone seal, for compression adapter. 2 cone sockets are included. Compression adapters have to be ordered separately. G 3/4 32100 9 1 3066 11 10 HERZ-3000 Bypass Body Angle model, right-side draining Connection branch-distance between centres is 50 mm, radiator connection G 3/4 with cone seal, freely moving nut. Radiator connection with external thread G 3/4, with cone seal, for compression adapter. 2 cone sockets are included. Compression adapters have to be ordered separately. G 3/4 32120 7 1 3066 21 10 Model HERZ-3000 Bypass Body Straight model Connection branch-distance between centres is 50 mm, radiator connection G 3/4 with cone seal, freely moving nut. Radiator connection with external thread G 3/4, with cone seal, for compression adapter. 2 cone sockets are included. Compression adapters have to be ordered separately. HERZ-3000 Bypass Bodies for One or Two-Pipe Systems Rp 1/2 With pre-setting, shutoff, draining and filling functions. HERZ-3000 Bypass Body Straight model Connection branch-distance between centres is 50 mm, radiator connection R 1/2 , freely moving nut, 2 connection nipples 1 3002 31 are included. Pipe connection with external thread G 3/4 with cone seal for compression adapter. Compression adapters have to be ordered separately. HERZ-3000 Bypass Body Angle model, left-side draining Connection branch-distance between centres is 50 mm, radiator connection R 1/2, freely moving nut, 2 connection nipples are included. Pipe connection with external thread G 3/4 with cone seal for compression adapter. Compression adapters have to be ordered separately. HERZ-3000 Bypass Body Angle model, right-side draining Connection branch-distance between centres is 50 mm, radiator connection R 1/2 , freely moving nut, 2 connection nipples 1 3002 12 are included. Pipe connection with external thread G 3/4 with cone seal for compression adapter. Compression adapters have to be ordered separately. 46 Rp 1/2 x G 3/4 32090 3 1 3066 02 10 Rp 1/2 x G 3/4 32110 8 1 3066 12 10 Rp 1/2 x G 3/4 32130 6 1 3066 22 10 HERZ-3000 Connection System for Radiators with Integrated Valves Product 1 group HERZ-3000-Bypass Bodies for One-Pipe Systems G 3/4 Dim. EAN 90 04174 Order number Item HERZ-3000-Bypass Body with fixed bypass Straight model Connection branch-centre distance 50 mm, radiator connection G 3/4 with cone seal, freely moving nut, pipe connection with external thread, G 3/4 for compression adapter connection. Compression adapters have to be ordered separately. G 3/4 32450 5 1 3166 01 10 HERZ-3000-Bypass Body with fixed bypass Angle model Connection branch-centre distance 50 mm, radiator connection G 3/4 with cone seal, freely moving nut. Radiator connection with external thread G 3/4 for compression adapter connection. Compression adapters have to be ordered separately. G 3/4 32470 3 1 3166 11 10 Model HERZ-3000-Bypass Bodies for One-Pipe Systems Rp 1/2 HERZ-3000-Bypass Body with fixed bypass Straight model Connection branch-centre distance 50 mm, radiator connection R 1/2 , freely moving nut, 2 connection nipples 1 3002 31 are included. Radiator connection with external thread G 3/4 for compression adapter connection. Compression adapters have to be ordered separately. G 3/4 32460 4 1 3166 02 10 HERZ-3000-Bypass Body with fixed bypass Angle model Connection branch-centre distance 50 mm, radiator connection R 1/2 , freely moving nut, 2 connection nipples 1 3002 31 are included. Radiator connection with external thread G 3/4 for compression adapter connection. Compression adapters have to be ordered separately. G 3/4 32480 2 1 3166 12 10 HERZ-3000 TP-bypass body for Radiator connection G 3/4 HERZ-3000 TP-bypass body for one-pipe systems for refurbishment of existing installations and Heating M 22 x 1.5 systems with old radiators, manufactured by JAGA, x G 3/4 Stelrad, BZW or therma panel. + Konushülse Center distance 50 mm to existing pipe installations Radiator connection 40 mm centres and contrary flow and return directions. With cone 33090 2 1 3166 31 10 HERZ-3000 TP-bypass body for two-pipe systems for connection to standard radiator with center distance 50 mm to an existing Pipe installations and pipe spacing 40 mm to radiator with contrary flow and return directions. With cone. 33110 7 1 3266 31 10 M 22 x 1.5 x G 3/4 + Konushülse HERZ-3000 TP-bypass body for Radiator connection HERZ-3000 TP-bypass body for one-pipe systems for refurbishment of existing installations and Heating systems with old radiators, manufactured by JAGA, Stelrad, BZW or therma panel. Center distance 50 mm to existing pipe installations Radiator connection 40 mm centres and contrary flow and return directions. Nipple 1/2. HERZ-3000 TP-bypass body for two-pipe systems for connection to standard radiator with center distance 50 mm to an existing Pipe installations and pipe spacing 40 mm to radiator with contrary flow and return directions. Nipple 1/2 Rp 1/2 M 22 x 1.5 x G 3/4 + Nippel 33100 8 1 3166 32 10 M 22 x 1.5 x G 3/4 + Nippel 33120 6 1 3266 32 10 47 HERZ-3000 Single Shutoff Valves Product 1 group HERZ-3000 Single Shutoff Valves G 3/4 with draining and filling functions, radiator connection G 3/4 Model HERZ-RL-4-Single Shutoff Valve. Straight model for two-pipe system. Radiator connection G 3/4 with cone seal, freely moving nut. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters have to be ordered separately. HERZ-RL-4-Single Shutoff Valve. Angle model for two-pipe system. otherwise same as 1 3041 01. HERZ-RL-4-Single Shutoff Valve. Straight model for two-pipe system. Radiator connection G 3/4 with cone seal and freely moving nut. Universal models with special socket Rp 1/2 for threaded pipes and compression adapters. HERZ-RL-4-Single Shutoff Valve. Angle model for two-pipe system. Otherwise same as 1 3061 01. Dim. EAN 90 04174 Order number Item G 3/4 30270 1 1 3041 01 20 G 3/4 30280 0 1 3042 01 20 G 3/4 x Rp 1/2 30560 3 1 3061 01 20 G 3/4 x Rp 1/2 30570 2 1 3062 01 20 Rp 1/2 With draining and filling functions, radiator connection Rp 1/2 HERZ-RL-4-Single Shutoff Valve. Straight model for two-pipe system. Radiator connection Rp 1/2 with cone seal, with iron pipe connection 1 6210 21. Pipe connection with external thread G 3/4 with cone seal for compression adapter connection. Compression adapters have to be ordered separately. HERZ-RL-4-Single Shutoff Valve. Angle model for two-pipe system. Otherwise same as 1 3437 11. Rp 1/2 x G 3/4 30310 4 1 3437 11 20 Rp 1/2 x G 3/4 30320 3 1 3448 11 20 HERZ-3000-Single Shutoff Valves G 3/4 with shutoff function, radiator connection G 3/4 HERZ-RL-1-Single Shutoff Valve. Straight model for two-pipe system. Radiator connection G 3/4, with cone seal, freely moving nut. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters have to be ordered separately. G 3/4 31380 6 1 3741 01 20 HERZ-RL-1-Single Shutoff Valve. Angle model for two-pipe system. Otherwise same as 1 3741 01. G 3/4 31370 7 1 3742 01 20 HERZ-RL-1-Single Shutoff Valve. Straight model for two-pipe system. Radiator connection G 3/4 with cone seal and freely moving nut. Universal models with special socket Rp 1/2 for threaded pipes and compression adapters. G 3/4 x Rp 1/2 31360 8 1 3761 01 20 G 3/4 x Rp 1/2 31350 9 1 3762 01 20 HERZ-Design cover, colour white (Ral 9010) Applicable for HERZ-3000 Bypass bodies and connection elements with integrated thermostatic valve, with snap-on mounting. 02170 1 1 0100 21 1 Colour traffic white (RAL 9016) 02340 8 1 0100 22 1 Colour chrome 02320 0 1 0100 41 1 HERZ-RL-1-Single Shutoff Valve. Angle model for two-pipe system. Otherwise same as 1 3761 01. HERZ-Design Cover for HERZ-3000 Other colours are available upon request 48 Heating Product 1 group HERZ-Double Connection Distributor for Radiators with Central Connection With shutoff, draining and filling functions Dim. EAN 90 04174 Order number Item G 3/4 31930 3 1 3033 01 10 Rp 1/2 x G 3/4 31940 2 1 3033 02 10 G 3/4 31950 1 1 3030 01 1 G 3/4 43600 0 1 4133 01 1 HERZ-Room Temperature Controller Set for radiator and floor connection Combined for flush mounting. The set includes flush box and cover, chrome, RL-1-Shutoff Valve, return temperature limiter (Mini Turbo), TS-98-V thermostatic valve and double connection distributor 1 8525 02 have to be ordered separately 1 8525 02 have to be ordered separately. G 3/4 82460 9 1 8100 25 1 Cover for 1 8100 25 spare parts, chrome. G 3/4 82461 6 1 8100 50 1 HERZ-Room Temperature Controller Set for radiator and floor connection Combined for flush mounting. The set includes flush box and cover, white, RL-1-Shutoff Valve, return temperature limiter, TS-98-V thermostatic valve and double connection distributor. 1 8525 02 have to be ordered separately. G 3/4 82465 4 1 8100 26 1 M 22 G 3/4 41020 8 1 3012 22 1 Model HERZ-Double Connection Distributor Radiator connection G 3/4, freely moving nut. Pipe connection with external thread G 3/4 with cone seal, for compression adapter. Compression adapters have to be ordered separately. HERZ-Double Connection Distributor Radiator connection Rp1/2, freely moving nut, 2 connection nipples are included. Radiator connection with external thread G 3/4, with cone seal, for compression adapter. Compression adapters have to be ordered separately. HERZ-Double connection Distributors for Two-Pipe Systems HERZ-Switch fix, Reverse Distributor for Two-Pipe Systems For appropriate flow and connection without crossover of radiator and piping. Advance and reverse motion of heating can be changed by means of adjusting spindle. The pipes can be freely installed. The adjustment of the radiator flow direction can be done subsequently. The radiator connection can be shutoff. Delivery includes flush box and cover. Connection G 3/4 with cone seal to radiator. Radiator connection with external thread G 3/4, with cone seal, for compression adapter. Compression adapters have to be ordered separately. HERZ-Double Connection Distributor for two-pipe systems For radiator connection without crossover for flush mounting. The radiator connection cannot be shutoff. Delivery includes flush box and cover. Radiator connection G 3/4 with cone seal. Radiator connection with external thread G 3/4, with cone seal, for compression adapter. 1 8525 02 have to be ordered separately. Skirting board distribution for two-pipe systems For radiator connection without crossover for flush mounting. The radiator connection cannot be shutoff. Delivery includes flush box and cover. Radiator connection G 3/4 with cone seal. Radiator connection with external thread M 22 x 1.5, with cone seal, for compression adapter. 1 8525 02 have to be ordered separately. 49 Connection Systems Product 1 group Sleeves, Nipples, Seals Dim. EAN 90 04174 Order number Item G 3/4 30490 3 1 3001 01 20 Rp 1/2 x G 3/4 30500 9 1 3002 12 1 Flat seal, set of 2 units, for HERZ-3000 manufactured till 2001. 31010 2 1 3002 10 10 Flat seal, set consists of 2 units, for HERZ-3000 manufactured from 2004 (18 mm). 32760 5 1 3002 11 10 Model Cone sleeve for radiator connection G 3/4, set consists of 2 units Connection nipples with flat seal, set consists of 2 units, direct installation on radiator Rp 1/2, self-sealing by means of O-Ring. Connection nipples with cone seal, set consists of 2 units, direct installation on radiator Rp 1/2, self-sealing by means of O-Ring. Valve connection G 3/4 with cone. Rp 1/2 x G 3/4 30930 4 1 3002 31 20 Connection nipples with flat seal, set consists of 2 units, direct installation on radiator Rp 1/2, self-sealing by means of O-Ring. Valve connection G 3/4 flat seal. Rp 1/2 x G 3/4 32575 5 1 3002 21 20 32580 9 1 3002 39 1 Set 32530 4 1 3030 50 1 G 3/4 76309 0 1 4120 01 20 Intersection Element in “X”-shape For pipe centre distance 50 mm, for shutoff, filling and draining. Connection with cone seal G 3/4, freely moving nut. Radiator connection with external thread G 3/4, with cone seal, for compression adapter. Compression adapters have to be ordered separately. G 3/4 31980 8 1 3404 34 10 Intersection Element in “X”-shape Pipe centre distance 50 mm, connection with cone seal G 3/4, with freely moving nut. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters have to be ordered separately. G 3/4 30840 6 1 3004 34 10 Intersection Element in “X”-shape Pipe centre distance 40 mm, connection with cone seal G 3/4, with freely moving nut. Radiator connection with external thread G 3/4, with cone seal for compression adapter. Compression adapters have to be ordered separately. G 3/4 31130 7 1 3004 44 10 Intersection Element in “X”-shape Pipe centre distance 50 mm, connection with cone seal M 22 x 1.5 with freely moving nut. Radiator connection with external M 22 x 1.5 thread M 22 x 1.5 for compression adapter. Compression adapters have to be ordered separately. 30830 7 1 3004 22 10 Spacer block centre pipe distance 50 mm, for pipe external diameter 14–20 mm. 30200 8 1 3003 50 20 Spacer block centre pipe distance 40 mm, for pipe external diameter 14–20 mm. 61920 5 1 6822 40 10 HERZ-Switch fix, Reverse Distributor for Two-Pipe Systems Connection nipples with cone seal, set of 2 units, direct installation on radiator Rp 1/2, self-sealing by means of O-Ring, valve connection G 3/4 with cone. Rp 1/2 x G 3/4 HERZ-Plastic Cover Rosete To be cut to length, white RAL 9010. HERZ-drain valve brass version, with O-ring sealing, freely moving nut G 3/4, Hose connection with cap 3/4, Hose connector to be ordered separately. Intersection Element HERZ-Double rose 50 Connection Systems Product 1 group HERZ-Radiator Connections for Two-Pipe Systems EAN 90 04174 Order number Item HERZ-Connection set for compression adapter Nickel-plated brass, for radiators with integrated valves M 22 x 1.5 and compact radiators. Compression adapter: at the x G 3/4 radiator side M 22 x 1.5, at the pipe side rnale thread G 3/4. Compression adapters have to be ordered separately. 02030 8 1 3031 00 10 HERZ-Connection set for soldering connection Nickel-plated brass, for radiators with integrated valves and compact radiators. Connections: On radiator side, compression adapter M 22 x 1.5, on pipe side soldering socket 18 mm. Compression adapters have to be ordered separately. 02040 7 1 3031 01 10 02050 6 1 3031 02 10 15710 3 1 3032 01 1 15720 2 1 3032 02 1 15730 1 1 3032 03 1 15740 0 1 3032 04 1 15750 9 1 3032 05 1 15760 8 1 3032 06 1 150 x 150 mm 65523 4 1 6332 00 1 15 x 1 150 x 100 mm 65520 3 1 6333 00 1 Model Dim. HERZ-Connection set for soldering connection same as above, however at the pipe side female/male soldering end 15/22 x 1 m. HERZ-Connection set for press connection Short version, nickel-plated brass, for radiators with integrated valves and compact radiators. Connections: On radiator side M 22 x 1.5, on pipe side press connection. M 22 x 1.5 x Cu 18 M 22 x 1.5 x Cu 22 x 1 mm 15 x 1 mm M 22 x 1.5 - 14 x 2 M 22 x 1.5 - 16 x 2 M 22 x 1.5 - 17 x 2 M 22 x 1.5 - 18 x 2 M 22 x 1.5 - 20 x 2 M 22 x 1.5 - 20 x 2.5 HERZ-Connection Elbow Set for Two-Pipe Systems HERZ-Valve connection elbow set For connection of HERZ-Connection set and radiator with integrated valves. Valves with shutoff and draining function. Nickel-plated copper pipe 15 x 1, soldered. Compression adapters M 22 x 1.5 for pipe connection and compression adapters for radiator connection have to be ordered separately. 2 pieces leg length 150 x 150 mm. Connection elbow pipe set 15 x 1, 150 x 100 mm. Product 3 group Connection Tubes, 300 mm / 1100 mm 14 x 2 - 15 mm / 300 mm 15470 6 P 7214 91 2 16 x 2 - 15 mm / 300 mm 15480 5 P 7216 91 2 18 x 2 - 15 mm / 300 mm 15500 0 P 7218 91 2 20 x 2 - 15 mm / 300 mm 15510 9 P 7220 91 2 14 x 2 - 15 mm / 1100 mm 15530 7 P 7214 92 2 16 x 2 - 15 mm / 1100 mm 15540 6 P 7216 92 2 18 x 2 - 15 mm / 1100 mm 15560 4 P 7218 92 2 20 x 2 - 15 mm / 1100 mm 15570 3 P 7220 92 2 14 x 2 - 15 mm / 300 mm 15590 1 P 7114 91 2 16 x 2 - 15 mm / 300 mm 15600 7 P 7116 91 2 18 x 2 - 15 mm / 300 mm 15620 5 P 7118 91 2 20 x 2 - 15 mm / 300 mm 15630 4 P 7120 91 2 14 x 2 - 15 mm / 1100 mm 15650 1 P 7114 92 2 16 x 2 - 15 mm / 1100 mm 15660 1 P 7116 92 2 18 x 2 - 15 mm / 1100 mm 15680 9 P 7118 92 2 20 x 2 - 15 mm / 1100 mm 15690 8 P 7120 92 2 51 Connection Systems Product 1 group HERZ-TS-90-Thermostatic Valves Dim. EAN 90 04174 Order number Item 1/2 x 15 70850 3 1 7727 19 20 1/2 x 15 70910 4 1 7728 92 20 HERZ-TS-90-Thermostatic Valve 3-Axis Valve “AB” Valve to the left of the radiator. Radiator connection with cone seal. Compression adapter 1 6292 11 is mounted. 1/2 x 15 71020 9 1 7758 19 20 HERZ-TS-90-Thermostatic Valve 3-Axis Valve “CD” Valve to the right of the radiator. Radiator connection with cone seal. Compression adapter 1 6292 11 is mounted. 1/2 x 15 71050 6 1 7759 19 20 600 61120 9 1 6330 11 20 1000 61130 8 1 6330 31 20 Bypass Body for one-pipe system with shutoff function Radiator connection with cone seal. Compression adapter 1 6284 04 is mounted, pipe connections have to be ordered separately. Threaded pipe connection G 3/4 with cone seal. Circulation brake included. 1/2 x G 3/4 70020 0 1 7173 01 20 Bypass Body for two-pipe system with shutoff and regulation function Radiator connection with cone seal. Compression adapter 1 6284 04 is mounted, pipe connections have to be ordered separately. Threaded pipe connection G 3/4 with cone seal. 1/2 x G 3/4 70040 8 1 7175 01 20 Bypass Body for one-pipe system with shutoff function Radiator connection with cone seal. Compression adapter 1 6284 04 is mounted, pipe connections have to be ordered separately. Threaded pipe connection M 22 x 1.5. Circulation brake included. 1/2 x M 22 x 1.5 70030 9 1 7174 01 20 Bypass Body for two-pipe system with shutoff and regulation function Radiator connection with cone seal. Compression adapter 1 6284 04 is mounted, pipe connections have to be ordered separately. Threaded pipe connection M 22 x 1.5. 1/2 x M 22 x 1.5 70050 7 1 7176 01 20 Bypass Body for one-pipe system with shutoff function Angle model Radiator connection with cone seal. Compression adapter 1 6284 04 is mounted, pipe connections have to be ordered separately. Threaded pipe connection G 3/4 with cone seal. 1/2 x G 3/4 74320 7 1 7187 14 20 Bypass Body for two-pipe system with shutoff and regulation function Angle model Radiator connection with cone seal. Radiator connection 1/2 x G 3/4 with cone seal, compression adapter 1 6284 04 mounted, pipe connections have to be ordered separately. Threaded pipe connection G 3/4 with cone seal. 74310 8 1 7189 14 20 Model HERZ-TS-90-Thermostatic Valve Straight model with elbow Radiator connection with elbow 1 6249 01 and cone. Compression adapter 1 6292 11 is mounted. HERZ-TS-90-Thermostatic Valve Reverse angle with air valve Radiator connection with cone seal. Compression adapter 1 6292 11 is mounted. Connection Pipe Connection pipe 15 x 1 Made of copper, nickel-plated. 1 6330 11: Pipe length 600 mm. 1 6330 31: Pipe length 1000 mm. HERZ-2000 Bypass Body 52 Valve Arrangements Product 1 group HERZ-Valve Arrangements “S” Two-Pipe Model EAN 90 04174 Order number Item 76210 9 1 7650 00 1 50440 2 1 5151 01 1 75280 3 1 7151 01 1 75520 0 1 7688 21 1 75510 1 1 7788 21 1 76900 9 1 7188 01 1 76910 8 1 7188 02 1 HERZ “S” Including regulating valve, connection pipe, bypass body and pipe connections. Two-pipe system, radiator connection with cone seal, threaded pipe connection M 22 x 1.5. HERZ-Valve Arrangements “Switchable” One-Pipe HERZ-Valve Arrangements “Switchable” including regulating valve and bypass body. One-pipe system, radiator connection with cone seal, threaded pipe connection G 3/4. HERZ-Valve Arrangements “Switchable” including regulating valve and bypass body. One-pipe system, radiator connection with cone seal, threaded pipe connection G 3/4. HERZ-Valve Arrangements for Convectors HERZ-Valve Arrangements for Convectors For two-pipe system, radiator connection with cone seal, threaded pipe connection G 3/4 with cone seal, pipe connections have to be ordered separately. HERZ-Valve Arrangements for Convectors For one-pipe system, radiator connection with cone seal, threaded pipe connection G 3/4 with cone seal, pipe connections have to be ordered separately. HERZ connection kit “Meibes” for One-Pipe HERZ connection kit “Meibes”, complete, one-pipe DN 15 consisting of control valve, bypass body and pipe connections. One-pipe system, radiator connection with cone, threaded pipe connection G 3/4 with cone, pipe connections must be ordered separately. HERZ connection kit “Meibes”, complete, one-pipe DN 20 consisting of control valve, bypass body and pipe connections. One-pipe system, radiator connection with cone, threaded pipe connection G 3/4 with cone, pipe connections must be ordered separately. 53 Four-Way Valves Product 1 group HERZ-VTA-40-Four-Way Valves for Thermostatic Operation Model HERZ-VTA-40-Four-Way Valve for one-pipe system Radiator connection from below, with flat seal, submerged pipe l = 290 mm, Ø =11 mm. Pipe centre distance 40 mm. The radiator can be removed while the system is under pressure. The valve upper part can be changed by means of HERZ Changefix Tool. Pipe connections G 3/4 with cone. Pipe connections have to be ordered separately. Circulation brake 1 6222 01 has to be ordered separately. HERZ-VTA-40-Four-Way Valve for two-pipe system Radiator connection from below, with flat seal, submerged pipe l = 290 mm, Ø =11 mm. Pipe centre distance 40 mm. The radiator can be removed while the system is under pressure. The valve upper part can be changed by means of HERZ Changefix Tool. Pipe connections G 3/4 with cone. Pipe connections have to be ordered separately. Dim. EAN 90 04174 Order number Item 15 290/11 72220 2 1 7767 41 10 20 290/11 72230 1 1 7767 42 10 15 290/11 72240 0 1 7767 51 10 20 290/11 72250 9 1 7767 52 10 74730 4 1 7768 51 10 HERZ-VTA-40-Uni-Four-Way Valves for Thermostatic Operation HERZ-VTA-40-Uni-Four-Way Valve for one or two-pipe system Radiator connection from below, with flat seal, submerged pipe l = 290 mm, Ø =11 mm. Pipe centre distance 40 mm. Can be switched from one- to two-pipe operation, can be shut off, selection between two TS upper parts during installation. The radiator can be removed while the system is under pressure. The valve upper part can be changed by means of HERZ-Changefix Tool. Pipe connections G 3/4 with cone. Pipe connections have to be ordered separatel. 15 290/11 HERZ-VTA-50-Four-Way Valves for Thermostatic Operation, threaded connection M 30 x 1.5 HERZ-VTA-50-Four-Way Valve for one-pipe system with thread M 30 x 1.5 for “H”-heads, lateral radiator connection from below, with flat seal, pipe centre distance 50 mm. With submerged pipe L = 290 mm, Ø = 11 mm. The radiator can be removed while the system is under pressure. The valve upper part can be changed by means of HERZ-Changefix “H” Tool. Pipe connections G 3/4 with cone. Pipe connection have to be ordered separately. HERZ-VTA-50-Four-Way Valve for two-pipe system with thread M 30 x 1.5 for “H”-heads, lateral radiator connection from below, with flat seal, pipe centre distance 50 mm. With submerged pipe L = 290 mm, Ø = 11mm. The radiator can be removed while the system is under pressure. The valve upper part can be changed by means of HERZ-Changefix “H” Tool. Pipe connections G 3/4 with cone. Pipe connection have to be ordered separately. Alternative submerged pipe lengths are available upon request 54 15 290/11 75380 0 1 7767 26 10 15 290/11 75290 2 1 7767 27 10 Four-Way Valves Product 1 group HERZ-VUA-40-Four-Way Valves for Thermostatic Operation Dim. EAN 90 04174 Order number Item HERZ-VUA-40-Four-Way Valve Straight model for one-pipe system Central or lateral radiator connection from below, with flat seal, submerged pipe l=150 mm, Ø=11 mm. Pipe centre distance 40 mm. Adjustable partial flow rate limit in thermostatic operation, the radiator can be removed while the system is under pressure, the valve upper part can be changed by means of HERZ-Changefix Tool. Pipe connections G 3/4 with cone. Pipe connections have to be ordered separately. 1/2 150/11 72280 6 1 7786 41 10 HERZ-VUA-40-Four-Way Valve Straight model for one-pipe system Central or lateral radiator connection from below, with flat seal, submerged pipe l=290 mm, Ø=11 mm. Pipe centre distance 40 mm. Adjustable partial flow rate limit in thermostatic operation, The radiator can be removed while the system is under pressure. The valve upper part can be changed by means of HERZ-Changefix Tool. Pipe connections G 3/4 with cone. Pipe connections have to be ordered separately. 1/2 290/11 72530 21 1 7786 51 10 HERZ-VUA-40-Four-Way Valve Straight model for two-pipe system Central or lateral radiator connection from below, with flat seal, submerged pipe l = 150 mm, Ø =11 mm. Pipe centre distance 40 mm. The radiator can be removed while the system is under pressure, the valve upper part can be changed by means of HERZ-Changefix Tool. Pipe connections G 3/4 with cone. Pipe connections have to be ordered separately. 1/2 150/11 72290 5 1 7783 41 10 HERZ-VUA-40-Four-Way Valve Straight model for two-pipe system Central or lateral radiator connection from below, with flat seal, submerged pipe l = 290 mm, Ø =11 mm. Pipe centre distance 40 mm. The radiator can be removed while the system is under pressure, the valve upper part can be changed by means of HERZ-Changefix Tool. Pipe connections G 3/4 with cone. Pipe connections have to be ordered separately. 1/2 290/11 72520 3 1 7783 51 10 1/2 150/11 72490 9 1 7784 42 10 1/2 150/11 72300 1 1 7784 41 10 Model HERZ-VUA-40-Four-Way Valve Angle model for one-pipe system Central or lateral radiator connection from below, with flat seal, submerged pipe l=150 mm, Ø =11 mm. Pipe centre distance 40 mm. Adjustable partial flow rate limit in thermostatic operation, The radiator can be removed while the system is under pressure. The valve upper part can be changed by means of HERZ-Changefix Tool. Pipe connections G 3/4 with cone. Pipe connections have to be ordered separately. HERZ-VUA-40-Four-Way Valve Angle model for two-pipe system Central or lateral radiator connection from below, with flat seal, submerged pipe l=150 mm, Ø =11 mm. Pipe centre distance 40 mm. The radiator can be removed while the system is under pressure, the valve upper part can be changed by means of HERZ-Changefix Tool. Pipe connections G 3/4 with cone. Pipe connections have to be ordered separately. Alternative submerged pipe lengths are available upon request 55 Four-Way Valves Product 1 group HERZ-VUA-50-Four-Way Valves for Thermostatic Operation, threaded connection M 30 x 1.5 Dim. EAN 90 04174 Order number Item HERZ-VTA-50-Four-Way Valve for one-pipe system dimension 1/2, with thread M 30 x 1.5 for “H”-heads, central or lateral radiator connection from below, with flat seal, pipe centre distance 50 mm. With submerged pipe L=290 mm, Ø=11 mm. The radiator can be removed while the system is under pressure. The valve upper part can be changed by means of HERZ-Changefix “H” Tool. Pipe connections G 3/4 with cone. Pipe connections have to be ordered separately. 15 290/11 75360 2 1 7786 26 10 HERZ-VTA-50-Four-Way Valve for two-pipe systems dimension 1/2, with thread M 30 x 1.5 for “H”-heads, central or lateral radiator connection from below, with flat seal, pipe centre distance 50 mm. With submerged pipe L=290 mm, Ø=11 mm. Adjustable partial flow rate limit in thermostatic operation. The radiator can be removed while the system is under pressure. The valve upper part can be changed by means of HERZ-Changefix “H” Tool. Pipe connections G 3/4 with cone. Pipe connection have to be ordered separately. 15 290/11 75370 1 1 7783 26 10 HERZ-VTA-50-Four-Way Valve for one-pipe system dimension 1/2, with thread M 30 x 1.5 for “H”-heads, central or lateral radiator connection from below, with flat seal, pipe centre distance 50 mm. With submerged pipe L=150 mm, Ø=11 mm. Adjustable partial flow rate limit in thermostatic operation. The radiator can be removed while the system is under pressure. The valve upper part can be changed by means of HERZ-Changefix “H” Tool. Pipe connections G 3/4 with cone. Pipe connection have to be ordered separately. 15 150/11 75370 1 1 7784 62 10 HERZ-VTA-50-Four-Way Valve for two-pipe system dimension 1/2, with thread M 30 x 1.5 for “H”-heads, central or lateral radiator connection from below, with flat seal, pipe centre distance 50 mm. With submerged pipe L=150 mm, Ø=11 mm, the radiator can be removed while the system is under pressure. The valve upper part can be changed by means of HERZ-Changefix “H” Tool. Pipe connections have to be ordered separately. Pipe connections G 3/4 with cone. Pipe connection have to be ordered separately. 15 150/11 76230 7 1 7784 61 10 Model HERZ-Four-way valve for Thermostatic Operation, threaded connection M 28 x 1.5 HERZ-VUA-AHA four-way valve for one-pipe system Replacement for T & A AHA-four-way valve. Dimension 1/2, with thread M 28 x 1.5 central or lateral radiator connection from below, with flat seal, pipe centre distance 40 mm. With submerged pipe L=55 mm, Radiator connection thread G 3/4, Pipe connections G 3/4 with cone. Pipe connection have to be ordered separately. 3/4 76490 5 1 7783 40 10 02570 9 1 0110 21 10 weiss RAL 9010 02580 8 1 0112 21 10 chrom 02590 7 1 0110 41 10 chrom 02600 3 1 0112 41 10 HERZ-Design cover for four-way valves VUA HERZ-VUA-50 DE LUXE Plastic Cover Cover VUA 50. Farbe weiss RAL 9010 HERZ-Design cover VUA 40. Cover VUA 50. HERZ-Design cover VUA 40. *) with presettable thermostatic upper part 56 Four-Way Valves Product 1 group HERZ-VUA-TV-Four-way Valves for Thermostatic Operation Dim. EAN 90 04174 Order number Item 3/4 x M 22 x 1.5 72180 9 1 7783 67 10 HERZ-VUA-T-Four-Way Valve Straight model for two-pipe system Central or lateral radiator connection from below, by means of turbulator connection (not included in package), pipe centre distance 35 mm. 3/4 x The radiator can be removed while the system is under pressure, the valve upper part can be changed M 22 x 1.5 by means of HERZ-Changefix Tool. Pipe connection 2 x M 22 x 1.5 with cone, radiator connection G 3/4 flat seal. Pipe connections have to be ordered separately. 72200 4 1 7783 91 10 HERZ-VUA-TV-Four-Way Valve with pre-setting function Angel model for two -pipe system Central or lateral radiator connection from below, by means of turbulator connection (not included in package), pipe centre distance 35 mm. The radiator can be removed while the system is under pressure, the valve upper part can be changed by means of HERZ-Changefix Tool. Pipe connection 2 x M 22 x 1.5 with cone, radiator connection G 3/4 flat seal. Pipe connections have to be ordered separately. 3/4 x M 22 x 1.5 72190 8 1 7784 67 10 HERZ-VUA-T-Four-Way Valve Angle model for twopipe system Central or lateral radiator connection from below, by means of turbulator connection (not included in package), pipe centre distance 35 mm. 3/4 x The radiator can be removed while the system is under pressure. The valve upper part can be changed M 22 x 1.5 by means of HERZ-Changefix Tool. Pipe connection 2 x M 22 x 1.5 with cone, radiator connection G 3/4 flat seal. Pipe connections have to be ordered separately. 72210 3 1 7784 91 10 Model HERZ-VUA-TV-Four-Way Valve with pre-setting function Straight model for two-pipe system Central or lateral radiator connection from below, by means of turbulator connection (not included in package), pipe centre distance 35 mm. The radiator can be removed while the system is under pressure, the valve upper part can be changed by means of HERZ-Changefix Tool. Pipe connection 2 x M22 x 1.5 with cone, radiator connection G 3/4 flat seal. Pipe connections have to be ordered separately. VUA-TV-Four-way Valves for Thermostatic Operation M 30 x 1.5 HERZ-4WA-T35-Four-Way Valve Straight model for one- and two-pipe system Central or lateral radiator connection from below, by means of turbulator connection (not included in package), can be switched from one to two-pipe operation. Pipe centre distance 35 mm. With M 30 x 1.5 thread for “H”Heads. Pipe connection 2 x G 3/4 with cone, radiator connection G 3/4 flat seal. Pipe connections have to be ordered separately. 3/4 74470 9 1 7765 31 10 HERZ-4WA-T50-Four-Way Valve Angle model for one- and two-pipe system Central or lateral radiator connection from below, by means of turbulator connection (not included in package), can be switched from one to two-pipe operation. Pipe centre distance 50 mm. With M 30 x 1.5 thread for “H”Heads. Pipe connection 2 x G 3/4 with cone, radiator connection G 3/4 flat seal. Pipe connections have to be ordered separately. 3/4 76220 8 1 7765 41 10 Alternative submerged pipe lengths are available upon request 57 Three Way Valves Product 1 group HERZ-CALIS-TS-Three-Way Valve for Thermostatic Operation DN EAN 90 04174 Order number Item CALIS-TS-Three-Way Valve With flat seal, without connections, with screw cap. Pipe connections have to be ordered separately. 15 71820 5 1 7761 01 10 1 7761 01 1 7761 02 20 71830 4 1 7761 02 10 Model kvs = 2.75 kvs = 3.2 HERZ-CALIS-TS-RD-Three-Way Valves for Thermostatic Operation, 100% Distribution CALIS-TS-RD-Three-Way Valve for Thermostatic Operation, 100% Distribution With flat seal, without pipe connections, with screw cap. Pipe connections have to be ordered separately. 15 74480 8 1 7761 38 5 20 74610 9 1 7761 39 5 1 7761 38 1 7761 39 kvs = 3.0 kvs = 3.0 25 75990 1 1 7761 40 5 1 7761 40 1 7761 41 kvs = 6.44 kvs = 6.44 32 76000 6 1 7761 41 5 15 73360 4 1 7761 43 5 20 72470 1 1 7761 45 5 15 73370 3 1 7761 44 5 20 72480 0 1 7761 46 5 HERZ-CALIS-TS 3-D-Models for Thermostatic Operation Thermostatic Head in a horizontal position CALIS-TS 3-D-Models Three-Way Valve Valve to the left of the radiator With flat seal, without connections, with screw cap. Pipe connections have to be ordered separately. 1 7761 43 1 7761 45 kvs = 3.5 kvs = 4.2 CALIS-TS 3-D-Models Three-Way Valve Valve to the right of the radiator With flat seal, without connections, with screw cap. Pipe connections have to be ordered separately. 1 7761 44 1 7761 46 kvs = 3.5 kvs = 4.2 HERZ-CALIS-TS-E 3-D-Models with Maximum Flow Rate for Thermostatic Operation in one-pipe systems Thermostatic Head in a horizontal position CALIS-TS E-3-D-Models Three-Way Valve Valve to the left of the radiator With flat seal, without connections, with screw cap. Pipe connections have to be ordered separately. 20 73330 7 1 7745 02 5 20 73340 6 1 7746 02 5 20 10040 6 1 1001 02 10 kvs = 5.28 CALIS-TS E-3-D-Models Three-Way Valve Valve to the right of the radiator With flat seal, without connections, with screw cap. Pipe connections have to be ordered separately. kvs = 5.28 HERZ-CALIS-T-Piece CALIS-Flow-T-Piece With flat seal, without connections. Pipe connections have to be ordered separately. 58 Control Valves Product 1 group HERZ-Thermostatic Three-Way Valves Model Thermostatic Three-Way Valve without bypass for mixing and diverting use. Use as mixing or diverting valve for control of heating zones, Fan-Coils, convectors and two lead systems with heating exchanger. Lift 3.7 mm, threaded connection M 30 x 1.5, three external threads with flat seal. Thermostatic Three-Way Valve with bypass for mixing and diverting use. Use as mixing or diverting valve for control of heating zones, Fan-Coils, convectors and two lead systems with heating exchanger. Lift 3.7 mm, threaded connection M 30 x 1.5, four external threads with flat seal. kvs Dim. EAN 90 04174 Order number Item 0.4 10 75020 5 1 7762 50 10 0.63 10 75040 3 1 7762 60 10 1.0 10 75070 0 1 7762 70 10 1.6 10 75080 9 1 7762 80 10 2.5 15 75030 4 1 7762 51 10 4.0 15 75050 2 1 7762 61 10 5.0 20 75060 1 1 7762 62 10 0.4 10 75090 8 1 7763 50 10 0.63 10 75110 3 1 7763 60 10 1.0 10 75140 0 1 7763 70 10 1.6 10 75150 9 1 7763 80 10 2.5 15 75100 4 1 7763 51 10 4.0 15 75120 2 1 7763 61 10 5.0 20 75130 1 1 7763 62 10 0.16 10 75882 9 1 7760 21 10 0.4 10 75750 1 1 7760 01 10 0.63 10 75760 0 1 7760 02 10 1.0 10 75770 9 1 7760 03 10 1.6 10 75780 8 1 7760 04 10 2.5 15 75790 7 1 7760 05 10 3.5 15 75800 3 1 7760 07 10 4.5 20 75810 2 1 7760 08 10 0.16 10 75883 6 1 7760 22 10 0.4 10 75820 1 1 7760 11 10 0.63 10 75830 0 1 7760 12 10 1.0 10 75840 9 1 7760 13 10 1.6 10 75850 8 1 7760 14 10 2.5 15 75860 7 1 7760 15 10 3.5 15 75870 6 1 7760 17 10 4.5 20 75880 5 1 7760 18 10 HERZ-Thermostatic Valves HERZ-Thermostatic Valve Straight model M 30 x 1.5 Control valve with graduated kvs value for air-conditioning systems. The valve is suitable for variable volume flows. 2 x external thread with flat seals. HERZ-Thermostatic Valve Straight model M 30 x 1.5 Control valve with graduated kvs value for air-conditioning systems. The valve is suitable for variable volume flows. 2 x external thread with cone. 59 Thermostatic Control Valves Product 1 group HERZ-Control valve kvs DN EAN 90 04174 Order number Item Thermostatic Regulating Valve STRÖMAX-TS-99-FV Straight model with test points, Rp (female thread) Dezincification resistant brass body with TS-99-FV thermostatic upper part, with 6 position fine adjustment for hydraulic balance of cooling ceiling systems, radiant panels and fan coils. Fitted with two 0.4 test points 1 0284. Presetting key (1 6919 98) is to be ordered separately. Pipe connection on both sides, with threaded socket, compression adapter 1 6266 01, suitable for press fitting connection. Compression adapters and press fitting connections have to be ordered separately. 15 76510 0 1 7217 38 10 Thermostatic Regulating Valve STRÖMAX-TS-98-V Straight model with test points, Rp (female thread) Dezincification resistant brass body with TS-98-V Thermostatic upper part, with continual adjustment for hydraulic balance of cooling ceiling systems, radiant panels and fan coils. Fitted with two test points 1 0284. Presetting key (1 6919 98) is to be ordered separately. Pipe connection on both sides, with threaded socket, compression adapter 1 6266 01, suitable for press fitting connection. Compression adapters and press fitting connections have to be ordered separately. 1.1 15 76520 9 1 7217 37 10 Thermostatic Regulating Valve STRÖMAX-TS-90-E Straight model with test points, Rp (female thread) Dezincification resistant brass body with thermostatic upper part TS-90-E with reduced resistance, for the regulation of cooling ceiling systems and fan coils. Fitted with two test points 1 0284. Pipe connection on both sides, with threaded socket, compression adapter 1 6266 01, suitable for press fitting connection. Compression adapters and press fitting connections have to be ordered separately. 2.0 15 74980 3 1 7217 31 10 Thermostatic Regulating Valve STRÖMAX TS-99-FV Straight model with test points, G (male thread) Dezincification resistant brass body with TS-99-FV thermostatic upper part, with 6 position fine adjustment for hydraulic balance of cooling ceiling systems, radiant panels and fan coils. Fitted with two test points 0.4 1 0284. Presetting key (1 6919 98) is to be ordered separately. Pipe connection with external thread G 3/4 on both sides for compression adapter and press fitting connection. Compression adapters and press fitting connections have to be ordered separately. 15 76530 8 1 7217 68 10 Thermostatic Regulating Valve STRÖMAX TS-98-V Straight model with test points, G (male thread) Dezincification resistant brass body with TS-98-V Thermostatic upper part, with continual adjustment for hydraulic balance of cooling ceiling systems, radiant panels and fan coils. Fitted with two test points 1 0284. Presetting key (1 6919 98) is to be ordered separately. Pipe connection with external thread G 3/4 on both sides for compression adapter and press fitting connection. Compression adapters and press fitting connections have to be ordered separately. 1.1 15 74950 6 1 7217 67 10 Thermostatic Regulating Valve STRÖMAX TS-90 Straight model with test points, G (male thread) Dezincification resistant brass body with thermostatic upper part TS-90 for the regulation of cooling ceiling systems and fan coils. Fitted with two test points 1 0284. Pipe connection with external thread G 3/4 on both sides for compression adapter and press fitting connection. Compression adapters and press fitting connections have to be ordered separately. 1.0 15 74960 5 1 7217 11 10 Thermostatic Regulating Valve STRÖMAX TS-90-E Straight model with test points, G (male thread) Dezincification resistant brass body with thermostatic upper part TS-90-E with reduced resistance, for the regulation of cooling ceiling systems and fan coils. Fitted with two test points 1 0284. Pipe connection with external thread G 3/4 on both sides for compression adapter and press fitting connection. Compression adapters and press fitting connections have to be ordered separately. 2.0 15 74970 4 1 7217 21 10 Model 60 Control Valves Product 1 group HERZ-FODRV Control valve Model FODRV Control valve 7217 TSV motorized fixed orifice double regulating valve. The 7217 TSV motorized FODRV is designed for installations in circuits where combined functions of actuated regulation and flow measurement are required. Actuator Fig. 7710 operated for on/off or Fig. 7990 for modulating control. Double regulating device, integral fixed orifice. Actuators to be ordered separately kvs DN EAN 90 04174 Order number Item 1.90 15 70290 7 1 7217 51 10 0.47 15 LF 70280 8 1 7217 50 10 1.00 15 MF 70310 2 1 7217 59 10 3.90 20 70300 3 1 7217 52 10 2.81 15 76330 4 1 7760 51 10 3.21 20 76340 3 1 7760 52 10 2.0 20 73320 8 1 7723 82 20 4.9 15 74990 2 1 7217 41 10 5.3 20 75000 7 1 7217 42 10 7.6 25 75010 6 1 7217 43 10 4.9 15 74760 1 1 7217 01 10 5.3 20 74770 0 1 7217 02 10 7.6 25 74780 9 1 7217 03 10 HERZ-Control Valve with reverse function HERZ-Thermostatic Valve with reverse function. Valve opens by pressed actuator pin. Designed for cooling applications by using standard thermostatic heads. Thread for Thermostatic head M 28 x 1.5 mm. 2 x external threads with flat seals. HERZ-Zone Valve HERZ-Zone Valve Regulation by HERZ-Actuating drives and HERZ-Thermostats. Straight model, radiator connection With cone seal. Universal models with special sockets for threaded pipes and compression adapters. Thermostatic upper part can be changed by means of HERZ-Changefix. HERZ-Regulating Valve for large volume flow Thermostatic Regulating Valve STRÖMAX-TS-E Straight model with test points, Rp (female thread) Dezincification resistant brass body, with thermostatic upper part TS-E (body identical to STRÖMAX-4217 GM/GR) for the regulation of cooling ceiling systems and fan coils for large volume flow. Fitted with two test points 1 0284. With 2 tap holes 1/4 for drain fittings (to be ordered separately), one screw plug 1 0273 09 is mounted. Pipe connection on both sides with long threaded sockets. Thermostatic Regulating Valve STRÖMAX-TS-E Straight model with test points, G (male thread) Dezincification resistant brass body, with thermostatic upper part TS-E body (identical to STRÖMAX-4217 GM/GR) for the regulation of cooling ceiling systems and fan coils for large volume flow. Fitted with two test points 1 0284. With 2 tap holes 1/4 for drain fittings (to be ordered separately), one screw plug 1 0273 09 is mounted. Pipe connection on both sides with external thread G 3/4 for compression adapter and press fitting connection. Compression adapters and press connections have to be ordered separately. Valve spindle for HERZ-STRÖMAX TS-E, TS-90-E, TS-90 and TS-98-V: An O-Ring is used as a spindle seal, the upper parts can be removed under normal working conditions. It guarantees a maximum level of maintenance-free operation and offers permanent smooth running of the valve. A permanently elastic soft seal for constant temperatures is used as a seat seal. 61 Heating, Climate Control Product 1 group HERZ-two-way control ball valve with handle kvs DN EAN 38 389693 Order number Item 5 15 42000 2 1 2117 01 1 8 20 42001 9 1 2117 02 1 12.5 25 42002 6 1 2117 03 1 20 32 42003 3 1 2117 04 1 32 40 42004 0 1 2117 05 1 50 50 42005 7 1 2117 06 1 5 15 42006 4 1 2117 11 1 8 20 42007 1 1 2117 12 1 12.5 25 42008 8 1 2117 13 1 20 32 42009 5 1 2117 14 1 32 40 42010 1 1 2117 15 1 50 50 42011 8 1 2117 16 1 HERZ-Actuator Actuating motor 230 V, 90°, 2 Pkt., 10 Nm, 140 sec. 42030 9 1 7712 60 1 HERZ-Actuator Actuating motor 230 V, 90°, 3 Pkt., 10 Nm, 140 sec. 42031 6 1 7712 61 1 HERZ Actuator Actuating motor 24 V, 90°, modular, 10 Nm. 42032 3 1 7712 62 1 Model Two-way ball valve with internal thread PN 40 Control valve for modulating control of heating, cooling or air systems, Ball with equal percentage characteristic, Spindle with large sliding surface and Teflon-slip ring, O-ring bearing sleeve, high turndown ratio 500:1, low torque PN 40, Internal thread to ISO 7/1 Rp, DZR brass body, DZR Brass Ball, chrome plated and polished, Axle seal with double O-ring made of EPDM, Actuators 7712 to be ordered separately. HERZ-two-way control ball valve without operator Two-way ball valve with internal thread PN 40 Control valve for modulating control of heating, cooling or air systems, Ball with equal percentage characteristic, Spindle with large sliding surface and Teflon-slip ring, O-ring bearing sleeve, high turndown ratio 500:1, low torque PN 40, Internal thread to ISO 7/1 Rp, DZR brass body, DZR Brass Ball, chrome plated and polished, Axle seal with double O-ring made of EPDM, Actuators 7712 to be ordered separately. HERZ-Actuator for two-way control ball valve 62 Accessories Product 1 group HERZ-Keys and tools EAN 90 04174 Order number Item Pre-Setting Key With blue shaft For HERZ-AS standard models. 61760 7 1 6600 00 1 Pre-Setting Key With yellow shaft For HERZ-DR-T-90 universal models. 61860 4 1 6800 00 1 4-mm-Allen Key For HERZ-3000. 61770 6 1 6615 00 1 2-mm-Allen Key For installation of thermostatic heads “Herzcules” and thermostatic heads 7260 99 und 7230 99. 61780 5 1 6616 00 1 61790 4 1 6618 00 1 61800 0 1 6625 00 1 65230 1 1 6625 41 1 62260 1 1 6630 01 1 Shutoff Key For HERZ-3000. 63150 4 1 6630 02 1 Pre-Setting Key For HERZ-RL-5. 61810 9 1 6639 01 1 Universal Key For opening the theft protection clips 9552 5mm square key for STRÖMAX-M 11 mm square key for STRÖMAX-MFS 63140 5 1 6640 00 1 Assembly Key For 3/8 - 3/4 connection with hexagon socket screws or mounting web. 61820 8 1 6680 00 1 HERZ-TS-90 -Installation Key 13 mm: For changing the O-Ring chamber HERZ-TS-90 14 mm: For changing the O-Ring chamber HERZ-TS-90-V 18 mm: For changing the HERZ-TS-90 Valve Upper Part 30 mm: For the installation of HERZ-Thermostatic Heads 62680 7 1 6807 90 1 63320 1 1 6809 67 1 61880 2 1 6808 67 1 63410 9 1 6819 98 1 66350 5 1 6819 32 1 Model 1.5-mm-Allen Key For HERZ-GP, positioning screw pre-setting. Multi-Purpose Key For HERZ-3000, HERZ-Return Valves, HERZ-Radiator connection sets and four-way valves. Setting Key For HERZ-4-WA-T35, straight model. Indicator, Setting and Checking Key For HERZ 3000 Radiator flow rates. Pre-Setting Key (blue) For HERZ-TS-90-V, models from 1998 onward. Valves with knurled cover screw. HERZ-TS-90-V Pre-setting key (red) for models before 1998 For valves with O-ring screw with nut. Pre-Setting Key For HERZ-TS-98-V, HERZ-3000 Bypass Bodies and connection elements with integrated thermostatic valve. Pre-Setting Key Universal Pre-Setting Key HERZ-Flowmeter 3 F900 in 8532/8533. 63 Spare parts Product 1 group HERZ-Upper Parts Model Upper Part For HERZ-RL-1-E, Shutoff valves 8437, 8438, 8537 and 8538. Upper Part For HERZ-3000 bypass bodies and connection elements with draining function, HERZ-RL-4-Single shutoff valves. Dim. EAN 90 04174 Order number Item 1/2–1 63600 4 1 6301 00 1 3/8–3/4 62580 0 1 6302 00 1 3/8–3/4 61040 0 1 6304 00 1 3/8 61080 6 1 6310 90 1 1/2 61090 5 1 6310 91 1 3/4 61100 1 1 6310 92 1 1 61070 7 1 6310 03 1 3/8–3/4 61640 2 1 6501 10 1 3/8–3/4 61650 1 1 6503 10 1 3/8–3/4 61670 9 1 6510 90 1 1–1¼ 61660 0 1 6510 03 1 3/8–3/4 61680 8 1 6512 90 1 Upper Part For HERZ-RL-5. Upper Part For HERZ-DR-T-90 universal models. For HERZ-DR standard models. HERZ-Hand Wheels Hand Wheel For HERZ-GP-Radiator Control Valves, including fastening screw. Lockshield For HERZ-GP-Radiator Control Valves. Hand Wheel For HERZ-DR-T-90 universal models, including screw disk. Hand Wheel For HERZ-DR-Radiator Control Valves, including insert and screw. Lockshield For HERZ-DR-T-90 universal models, including fastening screw. 64 Spare parts Product 1 group HERZ-Upper Parts Dim. EAN 90 04174 Order number Item 3/8 61590 0 1 6390 90 1 1/2 61600 6 1 6390 91 1 3/4 61610 5 1 6390 92 1 1 62460 5 1 6390 93 1 Thermostatic Upper Part For HERZ-TS-FV-Precise adjustment valve (purple cap). Can be changed under pressure by means of HERZ Changefix Tool. 1/2 63620 2 1 6367 99 1 Thermostatic Upper Part For HERZ Zone Valve Can be changed under pressure by means of HERZ Changefix Tool. 3/4 63830 5 1 6391 92 1 One pipe 61610 5 1 6390 92 1 Two pipe 63310 2 1 6367 98 1 Thermostatic Upper Part Can be changed under pressure by means of HERZ Changefix Tool, for CALIS-TS/ CALIS-TS-RD 1/2–3/4 61110 0 1 6329 01 1 for CALIS-TS-3-D 1/2–3/4 63510 6 1 6329 11 1 3/4 63520 5 1 6329 22 1 Model Thermostatic Upper Part For HERZ-TS-90, HERZ-3000, HERZ-VUA, HERZ-VTA and HERZ-DR-T-90-Valves (3/8–3/4) manufactured in 1991 or later. 1 6390 91 and for VTA-40 Uni. Can be changed under pressure by means of HERZ Changefix Tool. Thermostatic Upper Part with pre-setting For HERZ-TS-98-V (orange cap). HERZ-3000-connection elements with integrated thermostatic valve. Can be changed under pressure by means of HERZ Changefix Tool. for CALIS-TS-E-3-D (cannot be changed under pressure) B blue kv 0.06 61210 7 1 6365 69 1 C green kv 0.12 61220 6 1 6365 79 1 D yellow kv 0.25 61230 5 1 6365 89 1 E white kv 0.5 61240 4 1 6365 99 1 Thermostatic Upper Part with pre-setting For HERZ-TS-90-V. Can be changed under pressure by means of HERZ-Changefix Tool. 3/8–3/4 63420 8 1 6367 97 1 Thermostatic Upper Part with pre-setting For HERZ-TS-98-V (orange cap). HERZ-3000-connection elements with integrated thermostatic valve. Can be changed under pressure by means of HERZ-Changefix Tool. 3/8–3/4 63310 2 1 6367 98 1 1/2 61320 3 1 6379 02 1 1/2–1 62800 9 1 6379 03 1 kvs 0.16 - 1 6305 00 1 kvs 0.40 - 1 6305 01 1 kvs 0.63 - 1 6305 02 1 kvs 1.00 - 1 6305 03 1 kvs 1.6 - 1 6305 04 1 kvs 2.5 - 1 6305 05 1 kvs 3.5 - 1 6305 06 1 kvs 4.5 - 1 6305 07 1 kvs 0.40 - 1 6305 11 1 kvs 0.63 - 1 6305 12 1 kvs 1.00 - 1 6305 13 1 kvs 1.6 - 1 6305 14 1 kvs 2.5 - 1 6305 15 1 kvs 4.0 - 1 6305 16 1 kvs 5.0 - 1 6305 17 1 15 LF - 1 6305 50 1 Regulating Valve Upper part 7217-TSV. 15 - 1 6305 51 1 Regulating Valve Upper part 7217-TSV. 20 - 1 6305 52 1 Regulating Valve Upper part 7217-TSV. 15 MF - 1 6305 59 1 Thermostatic Upper Part with fixed kvvalues, can be changed under pressure by means of HERZ-Changing Tool Changefix. For HERZ-TS-90-kv Thermostatic Upper Part For HERZ-TS-90-Euniversal models. Can be changed under pressure by means of HERZ-Changefix Tool. Thermostatic Upper Part For HERZ-TS-E-standard models. Thermostatic Upper Part fo HERZ 7760 Thermostatic Upper Part for 7762 / 7763 HERZ-Regulating Valve Upper part 7217-TSV. The HERZ-TS-90-Thermostatic Upper Part 1 6365 69 –1 6365 99, 1 6367 97, 1 6367 98 sowie 1 6390 90 –1 6390 92, are dimensionally interchangeable. Change under pressure with HERZ-Changefix 1 7780 00 HERZ-Changefix 1 7780 00. 65 Spare parts Product 1 group HERZ-O-Ring-Sets EAN 90 04174 Order number Item O-Ring Box, red 20 O-Rings and klingerit seals plus cleaning tool for HERZ-DR-Radiator Control Valves -1”. Till DN 20 from 1992. 61850 5 1 6710 00 1 O-Ring Set 20 O-Ring screws for HERZ-DR-T-90 Radiator Control Valves. 61890 1 1 6810 90 1 O-Ring Set 20 O-Ring chambers for HERZ-TS-90-Thermostatic Valves as well as Three- and Four-Way Valves. 62190 1 1 6890 00 1 Spindle Sealing Set For HERZ-GP-Radiator Control Valves, without pre-setting. 62470 4 1 6701 00 20 Spindle Sealing Set For HERZ-GP-Radiator Control Valves, with pre-setting. 62670 8 1 6702 00 20 62610 4 1 6810 00 1 61830 7 1 6705 00 1 Model HERZ-GP-Spindle Sealing Set HERZ-AS-T O-Ring Box, yellow 20 O-rings and klingerit seals plus cleaning tool. HERZ-O-Ring-Set O-Ring-Set, yellow 20 pcs O-ring-chambers, 1-key groove for STRÖMAX-M and STRÖMAX-R. 66 Spare parts Product 1 group HERZ-TS Model Valve Upper Part For HERZ thermostatic valves for the years1978-1989 and the conversion of HERZ-ASand GR-T manual regulating valves for the years1978-1992. Valve Upper Part For HERZ-TS DIN series “D” Model years 1986-1990. Dim. EAN 90 04174 Order number Item 3/8–1/2 61290 9 1 6376 00 1 3/4 61300 5 1 6376 02 1 3/8–1/2 61310 4 1 6379 00 1 HERZ-Thermostats, actuators and HERZ-TS-screw caps and bonnets of HERZ-TS-90 valves are compatible with the discontinued products and can be used for off-line as well as for the current series. HERZ-Thermostatic upper part Thermostatic upper part for the conversion of HERZ-AS Radiator control valve manufactured before 1978 (yellow body, handwheel beige). Hand Cutter for milling of the valve seat during refurbishing of HERZ-AS radiator control valves manufactured before 1978. 3/8–1/2 kv 0.06 1 6165 69 kv 0.12 1 6165 79 kv 0.25 1 6165 89 kv 0.5 1 6165 99 1 63820 6 3/8 1 6165 00 1 65430 5 1/2 1 6165 01 HERZ-ID built in 1965-1970, GP 1970-1978 Thermostatic upper part for the conversion of HERZ-ID Radiator control valve manufactured 1965-1970. Hand Cutter for milling of the valve seat during refurbishing of HERZ ID radiator control valves manufactured 1965-1970. 3/8–1/2 65480 0 1 6360 99 1 3/8–1/2 65490 9 1 6360 00 1 1 6367 32 20 1 3089 67 20 HERZ-AGA / Stelrad, built in 1980-1991 Thermostatic upper part Thermostatic upper part TS-90-V preset, the retrofitting of AGA / Stelrad C32 / 2Compact valve connection kit 1980-1991. HERZ-Thermopanel, Modulpanel, built in 1988-1994 Thermostatic upper part TS-90-V preset, the retrofitting from Thermopanel Radiator valve Dimensions The thermostat valve body HERZ-TS and the radiator control valves HERZ-AS-T and GP-T model years 1978 to 1990/1991 nickel-plated body and gray hand wheels are together with the currently manufactured equivalent series and can be easily replaced if necessary (nickel-plated body, hand wheels or screw caps, white) 67 Accessories, Tools Product 1 group HERZ-Changefix Model HERZ Changefix Tool for HERZ-Thermostatic Upper Parts with threaded connection M 28 x 1.5. With its liquid lock function, this tool permits to change the upper part of the valve or clean the seat seal at the spindle while the system is under pressure. HERZ Changefix Tool for HERZ-Thermostatic Upper Parts with threaded connection M 30 x 1.5. with its liquid lock function, this tool permits to change the upper part of the valve or clean the seat seal at the spindle while the system is under pressure. EAN 90 04174 Order number Item 71260 9 1 7780 00 1 74160 9 1 7780 98 1 71270 8 1 7780 04 1 71280 7 1 7781 00 1 73240 9 1 7781 01 1 Set of seals Pressure measuring accessories for measuring the differential pressure or static pressure at the closed valve by means of the HERZ-measuring instruments 1 8900 and 1 8903. Set of cleaning brushes 68 Heating Control Product 1 group HERZ-Three-Way Mixing and Diverting Valves Model DN Dim. EAN 90 04174 Order number Item 15 1/2 42870 8 1 4037 15 1 20 3/4 42880 7 1 4037 20 1 25 1 42890 6 1 4037 25 1 32 1¼ 42900 2 1 4037 32 1 40 1½ 42910 1 1 4037 40 1 50 2 42920 0 1 4037 50 1 24 V 74810 3 1 7712 11 1 230 V 74790 8 1 7712 50 1 24 V 74820 2 1 7712 51 1 24 V 74860 8 1 7712 80 1 91900 8 1 9102 40 76010 5 1 7766 03 1 76020 4 1 7766 04 1 76290 1 1 7766 13 1 76300 7 1 7766 14 1 HERZ-Three-Way Mixing and Diverting Valve For the control of cold and hot water. With valve drive 1 7712, suitable as control device with adjustable characteristic line. Stainless steel spindle, brass valve cone with glass-fibre reinforced teflon seal ring. Brass bushing with EPDM-O-Ring. Vertical and horizontal mounting is possible. Cast brass body with 3 external threads, brass version, flat seal, without threaded connection elements. Valve Drives for Three-Way Valve, Actuating Power 500 N Valve Drive for Three-Way Valve, actuating power 500 N Operation through heating control for 2-point, 3-point or continuous control. Selection of characteristic line is linear or parallel. Two-piece body made of selfextinguishing plastic. Plastic console and brass union nut for valve installation. Working condition can be directly switched, automatic adjustment of valve lift. Code switch for selection of characteristic line and running time. Gearbox for positioning of valve and adjustment of hand wheel. Vertical and horizontal mounting is possible, inverted installation is not possible. Valve Drive for Three-Way Valve, actuating power 500 N Operating through heating control for 3-point operation. Two-piece body made of self-extinguishing plastic. Plastic console and brass union nut for valve installation. Gearbox for positioning of valve and hand wheel adjustment. Vertical and horizontal mounting is possible, inverted installation is not possible. Valve Drives for Three-Way Valve, Actuating Power 800 N Valve Drive for Three-Way Valve, actuating power 800 N Operation through heating control with switching exit (3-point control). Black box with actuator, control electronics, LED display and transmission. Box cover transparent. Self-extinguishing plastic parts. Gear and mounting clamp made of cast zinc. Electronic force dependent shutoff, automatic valve lift adjustment, encoding switch for operating time. Manual adjustment from outside by means of circuit breaker. Vertical and horizontal mounting at valve is possible, inverted installation is not possible. Hand Wheel for Three-Way Mixing and Diverting Valves HERZ-Hand Wheel for HERZ-Three-Way Mixing and Diverting Valve 4037, not supplied with valve drive. Mixing Valve for Return Mounting Teplomix-Three-Way-thermostaic control valve Brass version, with flat seal. The Teplomix-Three-Way valve is equipped with a pre-set constant temperature control and it is used as mixer in return. For throttling of bypass between flow and return. Max. application temperature range till 110 °C Models ..-03 and ..-14 with bypass. Temp. approx. 61 °C. Models ..-13 and ..-14 with bypass closing function, Temp. approx. 55–63 °C. Leakage rate max. 10%. DN 25, kvs = 11; DN 32, kvs = 14. DN 25 DN 32 69 Heating Product 1 group HERZ-Pump set 4500 KRAS Model Pump set 4500 KRAS (Thermal mixing valve). For solid fuel boilers and biomass systems, in order to maintain a minimum boiler return temperature. Consisting of TEPLOMIX automatic temperature control mixing valve, isolation valve, circulating pump and isolation valve with backflow preventer, factory assembled and leakage tested. Design: Thermal mixing valve. Pump set 4500 KRAS (mixing valve with automatic thermostat). For solid fuel boilers and biomass systems, in order to maintain a minimum boiler return temperature. Consisting of 4037 temperature control mixing valve, isolation valve, circulating pump and isolation valve with backflow preventer, factory assembled and leakage tested, mixing valve and electric actuator of choice. Design: mixing valve with automatic thermostat. Pump set 4500 KRAS (1/4 turn mixing valve with electric actuator). For solid fuel boilers and biomass systems, in order to maintain a minimum boiler return temperature. Consisting of EUROMIX mixing valve, isolation valve, circulating pump and isolation valve with backflow preventer, factory assembled and leakage tested, 1/4 turn mixing valve with electric actuator. Design: 1/4 turn mixing valve with electric actuator. DN EAN 90 04174 Order number Item 25 67000 8 1 4500 73 1 32 67010 7 1 4500 74 1 20 67020 6 1 4500 82 1 25 67030 5 1 4500 83 1 32 67040 4 1 4500 84 1 40 67050 3 1 4500 85 1 50 67060 2 1 4500 86 1 20 67070 1 1 4500 92 1 25 67080 0 1 4500 93 1 32 67090 9 1 4500 94 1 DN EAN 38 389693 Order number Item 15 42037 8 1 2137 01 1 20 42038 5 1 2137 02 1 25 42039 2 1 2137 03 1 32 42040 8 1 2137 04 1 40 42041 5 1 2137 05 1 50 42042 2 1 2137 06 1 15 42043 9 1 2137 11 1 20 42044 6 1 2137 12 1 25 42045 3 1 2137 13 1 32 42046 0 1 2137 14 1 40 42047 7 1 2137 15 1 50 42048 4 1 2137 16 1 42055 2 1 7712 63 1 HERZ-Three-way mixing valve with handle Model Three-way mixing valve, PN 16 Female end connections, Body and cone dezincification Brass EPDM gasket Medium temperature -10 ° - 110 °C PN 10 HERZ-Three-way mixing valve without operator Three-way mixing valve, PN 16 Female end connections, Body and cone dezincification Brass EPDM gasket Medium temperature -10 ° - 110 °C PN 10. HERZ-Three-way mixing valve actuator HERZ-Actuator valve controller NR 230-455, 230 V. 70 Heating Control Product 1 group HERZ-Electronic Heating Controller Model Electronic Heating Controller with PI control With programmable time and temperature adjustment. For motor drives at valves or mixers and for pumps (on/off signal). Adjustment corresponding to external or room temperature by external or internal sensor. Easy adjustment with system by module switch and service parameter. Electronics located in the attachable body, white (RAL 9010), front panel with keyboard and digital display in window. Digital timer with weekly and yearly programme, with relay that counts operating hours. Time depending control of several room temperature controllers without clock per relay. Frost protection in operating modus “out” is possible. For installation on surface mount or on flush box. Dim. EAN 90 04174 Order number Item 110 230 V 74210 1 1 7793 23 1 24 V 74220 0 1 7793 24 1 74230 9 1 7793 01 1 74240 8 1 7793 00 1 HERZ-Electronic Heating Controller External temperature probe for heating controller Nickel thin coated sensor according to DIN 43760. Base and cover white (RAL 9010), installation on surface or flush. Touch temperature probe for heating controller For temperature measurements on pipes. Nickel-thin-coat sensor according to DIN 43760, spring mounted. Olive-yellow thermoplastic box, non-inflammable. Strap retainer for pipe diameters 15–90 mm and heat conducting paste included in delivery. 71 Heating Product 6 group HERZ-Safety Valves PN Dim. EAN 383 000282 Order number Item 2.5 15 7759 1 2104 04 6 3 15 7766 1 2104 14 1 4 15 7735 1 2670 01 1 2.5 15 7544 1 2611 01 100 3 15 7551 1 2612 01 100 6 15 7568 1 2613 01 100 Pressure Relief safety valve Housing made of forged brass, EPDM Diaphragm, cap seals and plastic. Temperature range is from 0 °C to +110 °C. For boiler output to 100 kW, DN 15. 2.5 20 7438 1 2604 02 100 3 20 7445 1 2605 02 50 6 20 7452 1 2606 02 100 For boiler output to 200 kW, DN 25. 2.5 25 7469 1 2607 03 30 3 25 7490 1 2608 03 50 6 25 7476 1 2667 03 50 8 25 7483 1 2687 03 50 2.5 32 7506 1 2609 04 30 3 32 7513 1 2610 04 30 6 32 7520 1 2669 04 12 8 32 7537 1 2689 04 12 10 10 7711 1 2630 00 50 10 15 7704 1 2630 01 50 10 10 9784 1 2630 10 50 10 15 9791 1 2630 11 50 PN Dim. EAN 38 3896342 Order number Item G 1/2 15 0859 1 2622 11 10 G 3/4 20 0866 1 2622 12 10 Model HERZ Boiler group forged brass acc. EN 12420 Female thread acc. ISO228 Maximum temperature 100 °C. Manometric thermometer: working temperature 20 °C up to 100 °C. Thermometer Body made of forged brass, EPDM seals. Temperature range is from 0 °C to +100 °C. Pressure Relief safety valve Housing made of forged brass, EPDM Diaphragm, cap seals and plastic. Temperature range is from 0 °C to +110 °C. For boiler output to 75 kW, DN 15. For boiler output to 350 kW, DN 32. HERZ-Air Release Valve Automatic Air Vent Forged brass version, with EPDM seal, PN 10, G thread, for heating systems. For all nonagressive fluids such as water, oil, air, steam, fuel and lubricating oil. Working temperature 0 °C to +110 °C. Automatic Air Vent FWW Forged brass version, with EPDM seal, PN 10, G thread, for heating systems. For all nonagressive fluids such as water, oil, air, steam, fuel and lubricating oil. Working temperature 0 °C to +110 °C. HERZ-Backflow preventer Model Spring check valves Brass body, NBR seals, PN 10, Temperature range is from 0 °C to +80 °C 72 G1 25 0873 1 2622 13 10 G 1¼ 32 0880 1 2622 14 10 G 1½ 40 0897 1 2622 15 5 G2 50 0903 1 2622 16 5 Ball Valves Product 6 group HERZ-Ball Valves 8 10 15 20 25 32 40 50 65 80 15 20 25 32 40 8 EAN 383 000282 6004 6011 6028 6035 6042 6059 6066 6073 6080 6097 6523 6530 6547 6554 6561 6103 Order number 1 2100 09 1 2100 00 1 2100 01 1 2100 02 1 2100 03 1 2100 04 1 2100 05 1 2100 06 1 2100 07 1 2100 08 1 2402 01 1 2402 02 1 2402 03 1 2402 04 1 2402 05 1 2100 19 63 10 6110 1 2100 10 25 50 15 6127 1 2100 11 25 50 20 6134 1 2100 12 25 50 25 6141 1 2100 13 16 40 32 6158 1 2100 14 40 15 6578 1 2402 11 25 40 20 6585 1 2402 12 25 40 25 6592 1 2402 13 16 40 63 63 50 50 50 40 40 40 63 32 8 10 15 20 25 32 40 50 8 6608 6745 6752 6769 6776 6783 6790 6806 6813 6820 1 2402 14 1 2160 09 1 2160 00 1 2160 01 1 2160 02 1 2160 03 1 2160 04 1 2160 05 1 2160 06 1 2160 19 16 25 25 25 25 16 16 12 8 25 63 10 6837 1 2160 10 25 50 15 6844 1 2160 11 25 50 20 6851 1 2160 12 25 40 25 6868 1 2160 13 16 40 32 6875 1 2160 14 16 Ball valve EURO with lever handle Forged brass body according to DIN 17660, nickel plated, with PTFE & NBR seals, female thread connection. Temperature range -10 °C to +110 °C (water from 0 °C to +110 °C). 16 15 6431 1 2902 01 25 16 20 6448 1 2902 02 25 16 25 6455 1 2902 03 16 16 32 6462 1 2902 04 16 Ball valve EURO with T- handle Forged brass body according to DIN 17660, nickel plated, with PTFE & NBR seals, female thread connection. Temperature range -10 °C to +110 °C (water from 0 °C to +110 °C). 16 15 6479 1 2902 11 25 16 20 6486 1 2902 12 25 16 25 6493 1 2902 13 16 16 32 6509 1 2902 14 16 Ball valve, KS with lever handle Forged brass body according to DIN 17660, nickel plated, with PTFE & NBR seals, female thread connection. Temperature range -10 °C to +150 °C (water from 0 °C to +110 °C). 25 25 25 25 25 25 25 10 15 20 25 32 40 50 6172 6189 6196 6202 6219 6226 6233 1 2453 00 1 2453 01 1 2453 02 1 2453 03 1 2453 04 1 2453 05 1 2453 06 25 25 25 16 16 12 8 Ball valve, KS with T- handle Forged brass body according to DIN 17660, nickel plated, with PTFE & NBR seals, female thread connection. Temperature range -10 °C to +150 °C (water from 0 °C to +110 °C). 25 10 6240 1 2453 10 25 25 15 6257 1 2453 11 25 25 20 6264 1 2453 12 25 25 25 6271 1 2453 13 16 25 32 6288 1 2453 14 16 Model Ball valve, “TÜV” with lever handle Forged brass body according to DIN 17660, nickel plated, with PTFE spindle seals, female thread connection. Temperature range -30 °C to +150 °C (water from 0 °C to +110 °C). Ball valves are also available in DZR. Ball valve with drain cock and plug Forged brass body according to DIN 17660, nickel plated, with PTFE & NBR seals, female thread connection. Temperature range -10 °C to +150 °C (water from 0 °C to +110 °C). Ball valve, “TÜV”with T- handle Forged brass body according to DIN 17660, nickel plated, with PTFE spindle seals, female thread connection. Temperature range -30 °C to +150 °C (water from 0 °C to +110 °C). Ball valve with drain cock and T- handle Forged brass body according to DIN 17660, nickel plated, with PTFE & NBR seals, female thread connection. Temperature range -10 °C to +150 °C (water from 0 °C to +110 °C). Ball valve, “TÜV”, with one male AG thread connection with lever handle Forged brass body according to DIN 17660, nickel plated, with teflon seals, male x female thread connection. Temperature range -30 °C to +150 °C (water from 0 °C to +110 °C). Ball valve, “TÜV”, with one male AG thread connection with T- handle Ball valve, “TÜV”with T-handle Forged brass body according to DIN 17660, nickel plated, with teflon seals, male x female thread connection. Temperature range-30 °C to +150 °C (water from 0 °C to +110 °C). PN Dim. 63 63 50 50 50 40 40 40 16 16 40 40 40 40 25 63 Item 25 25 25 25 16 16 12 8 10 5 25 25 16 16 12 25 73 Ball Valves Product 6 group HERZ-Ball Valves Model PN Three-way Ball Valve Forged brass body according to DIN 17660, nickel plated, PTFE seals. Temperatures of Medium from -30 °C to 150 °C (water at 0 °C to 110 °C). Dim. 383EAN 000282 Order number Item 40 15 7049 1 2412 01 50 16 25 7209 1 2268 03 32 16 25 7216 1 2269 03 32 Check Valve Brass body, with O-ring, PN 10, G 1/2. Temperature range is from 0 °C to +100 °C. Rp 1/2 - Rp 3/8. 10 15 7612 1 2621 01 25 Check valve and pump connection Body of forged brass, nickel plated, EPDM gaskets, PN 25, DN 20, Temperature range is from 0 °C to +90 °C. 25 25 7636 1 2634 03 25 12.5 15 7155 1 2512 01 50 12.5 20 7162 1 2512 02 20 25 20 9463 1 2414 02 20 25 25 9500 1 2414 03 10 25 32 9487 1 2414 04 10 25 20 9470 1 2415 02 20 25 25 9517 1 2415 03 10 25 32 9494 1 2415 04 10 PN Dim. EAN 900417 4 Order number Item 10 10 41030 7 1 4119 00 20 10 15 41040 6 1 4119 01 20 10 20 41050 5 1 4119 02 20 Ball valve for pump with check valve Body made of forged brass, nickel plated, Ball with PTFE seat. Check valve EPDM seal. Temperature range 0 °C to +110 °C. Ball valve for pump Body made of forged brass, nickel plated, Ball with PTFE seat. Temperature range 0 °C to +110 °C. HERZ-Boiler fill and drain valves Ball valve with hose union 1/2 WRAS Approved Body made of forged brass according to DIN 17660, PTFE seals. Temperatures of Medium from -30 °C to 150 °C (water at 0 °C to 110 °C). HERZ-Multifunction Ball Valve with red “T’’ Handle and Thermometer 0–120 °C Three-Way-Ball Valve, made of DZR forged brass acc. DIN 17660, nickel plated, 2 x socket, 1 x male thread 5/4 flat seal, end connection 1/2 for drain cock or manometer. T port of ball with full bore allows the draining or filling of full systems or part of the systems. HERZ-Multifunction Ball Valve with blue “T’’ Handle and Thermometer 0–120 °C Three-Way-Ball Valve, made of DZR forged brass acc. DIN 17660, nickel plated, 2 x socket, 1 x male thread 5/4 flat seal, end connection 1/2 for drain cock or manometer. T port of ball with full bore allows the draining or filling of full systems or part of the systems. THERMOFLEX Model THERMOFLEX, HERZ-Boiler Filling and Draining Cock Brass version. Sturdy model, smooth running by means of cup spring and friction disk with O-Ring seal. Pipe connection with external thread, hose connection with cap and chain. Hose connection have to be ordered separately. 74 Gate Valves Product 1 group HERZ-Gate Valves Model 4112 Gate valve Bronze construction, Threaded ISO 7-1 Rp Graphite Gasket. Gate valve with 2 blank plugs Bronze construction, Threaded Acc ISO 7-1 Rp Graphite Gasket DN 15–DN 50: 2 holes 1/4, 1 plug 1 0272 09 screwed in. DN 65–DN 80: 2 holes 3/8, 1 plug 1 0272 00 screwed in Drain valve 270, 275 are to be ordered separately. Order number Item 1/2 EAN 90 04174 40260 9 1 4112 01 10 3/4 40270 8 1 4112 02 10 25 1 40280 7 1 4112 03 10 32 1¼ 40290 6 1 4112 04 5 40 1½ 40300 2 1 4112 05 5 50 2 40310 1 1 4112 06 5 65 2½ 40320 0 1 4112 07 1 80 3 40330 9 1 4112 08 1 20 3/4 40340 8 1 4112 12 10 25 1 40350 7 1 4112 13 10 32 1¼ 40360 6 1 4112 14 5 40 1½ 40370 5 1 4112 15 5 50 2 40380 4 1 4112 16 5 65 2½ 40390 3 1 4112 17 1 80 3 40400 9 1 4112 18 1 15 1/2 40410 8 1 4113 01 10 20 3/4 40420 7 1 4113 02 10 25 1 40430 6 1 4113 03 10 32 1¼ 40440 5 1 4113 04 5 40 1½ 40450 4 1 4113 05 5 50 2 40460 3 1 4113 06 5 EAN Order number Item 15 – 1 4500 41 1 20 – 1 4500 42 1 25 – 1 4500 43 1 15 LF – 1 4500 11 1 15 MF – 1 4500 21 1 15 – 1 4500 01 1 20 – 1 4500 02 1 25 – 1 4500 03 1 15 LF – 1 4500 50 1 15 MF – 1 4500 50 1 15 – 1 4500 51 1 20 – 1 4500 52 1 15 – 1 4500 66 1 15 – 1 4500 67 1 DN Dim. 15 20 Gate Valve with non-rising spindle HERZ-Gate Valve with non-rising spindle “BS” version Dezincification resistant brass version, socket x socket, threaded Rp acc. ISO 7-1. Medium temp. range +5 ... +120 °C, PN 20 at 20 °C, for all nonagressive fluids such as water, steam or hydraulic oil. HERZ-Connect 4 Model Dim. HERZ-Pressure Independant Connect-4 PN16 Fan Coil dynamic balancing connection. A pre-fabricated module providing pressure independent control, flushing and isolation for terminal units. Utilizing 4006 SMART PIBCV for dynamic balancing & control. All components are DZR - same components as above. Actuators to be ordered separately HERZ-Connect-4 PN 16 Fan coil commissioning connection A pre-fabricated module providing flow measurement, flushing and isolation for terminal units HERZ-Connect-4 is suitable for HTG & CHW applications All components are DZR - The module includes: Fig 4017 FODRV commissioning valve Fig 4111 Strainer Fig 2512 Blow down valve Fig 2190 EXT Ball Valve HERZ-Motorised Connect-4 PN 16 Fan coil commissioning connection motorised A pre-fabricated module providing flow measurement, flushing and isolation for terminal units HERZ Connect-4 is suitable for HTG & CHW applications All components are DZR - same components as above Fig 7217 FODRV Motorised valve Actuators to be ordered separately HERZ-Radiant Panel Connect-4 PN 16 Radiant Panel commissioning connection A pre-fabricated module providing flow measurement, flushing and isolation for Radiant Panels Controlled by remote adjustment or actuated All components are DZR - same components as above Fig 7217 Thermostatic Regulating valve 4500-67 fitted with TS-98-V thermostatic insert 4500-66 fitted with TS-90-V thermostatic insert Actuators or remote adjusters to be ordered separately 75 Gate Valves Product 1 group HERZ-Gate Valves Model HERZ Gate Valve PN 16 Bronze construction Cast Iron Handwheel Taper threads to BS 21 Maximum Pressure 16 bar @ 100 °C Maximum Temperature 170 °C @ 7 bar HERZ Gate Valve PN 20 WRAS Approved Bronze construction Cast Iron Handwheel Taper threads to BS 21 Maximum Pressure 20 bar @ 100 °C Maximum Temperature 180 °C @ 9 bar HERZ Lockshield Gate Valve PN 20 WRAS Approved Bronze construction Taper threads to BS 21 Maximum Pressure 20 bar @ 100 °C Maximum Temperature 180 °C @ 9 bar HERZ Compression Gate Valve PN 16 WRAS Approved Brass construction Cast Iron Handwheel Compression ends to BS 864/2 Maximum Pressure 16 bar @ 30 °C Maximum Temperature 120 °C @ 5 bar HERZ Compression Lockshield Gate Valve PN 16 WRAS Approved Brass construction Compression ends to BS 864/2 Maximum Pressure 16 bar @ 100 °C Maximum Temperature 170 °C @ 7 bar HERZ-Gate Valve flanged version* Cast iron construction, acc. EN-GJL 250, flanged and drilled BS EN 1092-2 PN 16. Bolted bonnet non rising stem, face to face dimensions comply to BS5150 PN 16. In accordance with BS EN 1171 Temperature range -10 to 120 °C Maximum pressure 16 bar, for all non aggressive fluids such as water and oil products. *) only in UK 76 DN Dim. EAN 90 04174 Order number Item 15 1/2 – HV5516-01 1 20 3/4 – HV5516-02 1 25 1 – HV5516-03 1 32 1¼ – HV5516-04 1 40 1½ – HV5516-05 1 50 2 – HV5516-06 1 15 1/2 – HV5520-01 1 20 3/4 – HV5520-02 1 25 1 – HV5520-03 1 32 1¼ – HV5520-04 1 40 1½ – HV5520-05 1 50 2 – HV5520-06 1 15 1/2 – HV5520LS-01 1 20 3/4 – HV5520LS-02 1 25 1 – HV5520LS-03 1 32 1¼ – HV5520LS-04 1 40 1½ – HV5520LS-05 1 50 2 – HV5520LS-06 1 15 1/2 – HV5154CXC-01 1 22 3/4 – HV5154CXC-02 1 28 1 – HV5154CXC-03 1 35 1¼ – HV5154CXC-04 1 42 1½ – HV5154CXC-05 1 54 2 – HV5154CXC-06 1 15 1/2 – HV5154CXCLS-01 1 22 3/4 – HV5154CXCLS-02 1 28 1 – HV5154CXCLS-03 1 50 – HV5150-06 1 65 – HV5150-07 1 80 – HV5150-08 1 100 – HV5150-09 1 125 – HV5150-10 1 150 – HV5150-11 1 200 – HV5150-12 1 250 – HV5150-13 1 300 – HV5150-14 1 Heating, Climate Control Product 1 group HERZ-Regulating valve l/h DN Dim. EAN 90 04174 Order number Item 40400 80900 100 1500 2002500 4004000 5005000 15 G 3/4 45200 0 1 4001 21 1 20 G1 45210 9 1 4001 22 1 25 5/4 45220 8 1 4001 23 1 32 1½ 45230 7 1 4001 24 1 40 1¾ 45240 6 1 4001 25 1 50 2 ⁄8 45250 5 1 4001 26 1 Pressure Independent Balancing Control valve 40Compact design, dezincification resistant brass 400 80body, external thread connection DN 15 900 and DN 20 with cone, DN 25 up to DN 50 with flat seal. Two test points for measuring 1001500 the differential pressure. Combined flow rate controller and control valve, pressure 200independent. Actuator mounting threaded 2500 connection M 28 x 1.5 with operating range 4004.0 mm. Compression adapters and press 4000 connections have to be ordered separately. 500The actuating drive is not included. 15 G 3/4 45700 5 1 4006 11 1 20 G1 45710 4 1 4006 12 1 25 5/4 45720 3 1 4006 13 1 32 1½ 45730 2 1 4006 14 1 40 1¾ 45740 1 1 4006 15 1 50 2 3⁄8 45750 0 1 4006 16 1 20HERZ-SMART Pressure Independent 100 Balancing Control Valve Compact design, dezincification resistant brass body, external thread connection and with cone, 80Combined flow rate controller and control valve, 400 pressure independent. Actuator mounting 200threaded connection M 28 x 1.5 with operating 800 range 4.0 mm. Compression adapters and press connections have to be ordered 40separately. The actuating drive is not included. 200 15 LF G 3/4 45880 4 1 4006 60 1 15 G 3/4 45890 3 1 4006 61 1 20 G1 45900 9 1 4006 62 1 15 G 3/4 MF 45910 8 1 4006 69 1 102000 15 43810 3 1 4004 31 1 102000 20 43830 1 1 4004 32 1 102000 15 43820 2 1 4004 41 1 102000 20 43840 1 1 4004 42 1 Model Flow rate controller Pressure Independent. Compact design, dezincification resistant brass body, external thread connection DN 15 and DN 20 with cone, DN 25 up to DN 50 with flat seal. Two test points for measuring the differential pressure. Compression adapters and press connections have to be ordered separately. 3 HERZ-Combination valve 5000 HERZ-Differential Pressure Overflow Valves HERZ-Differential Pressure Overflow Valve Straight model One piece metal valve body, nickel-plated, for screw connection with flat seal. Joint elements have to be ordered separately. HERZ-Differential Pressure Overflow Valve Angle model One piece metal valve body, nickel-plated, for screw connection with flat seal. Joint elements have to be ordered separately. HERZ-Riser valve assembly for two-pipe radiator systems and decentralized distributed hot water Model 4500 FWW Prefabricated riser in accordance with the Guidelines of the FWW, including, - ball valves - drain cocks - Strainer - Differential pressure regulator - Test points The differential pressure is constant over the Differential pressure regulator set at 23 kPa Nominal pressure: PN 16 Operating temperature: max. 130 °C for DN 25 and DN 32 max. 110 °C for DN 40 and DN 50 Medium: heating water in accordance ÖNORM H5195 or VDI guideline 2035. The use of ethylene, or Propylene glycol up to a mixing ratio of 50% is permitted. l/h Dim. DN 4007 FWW EAN 90 04174 Order number Item 401200 1 15 40670 6 1 4500 13 1 401200 5/4 20 40680 5 1 4500 14 1 3004000 6/4 25 40690 4 1 4500 15 1 5006000 2 32 40700 0 1 4500 16 1 77 Heating, Climate Control Product 1 group HERZ-Differential Pressure Controller l/h DN Dim. EAN 90 04174 Order number Item 50-1200 15 G 1/2 42610 0 1 4007 01 1 60-1200 20 G 3/4 42620 9 1 4007 02 1 150-4000 25 G1 42630 8 1 4007 03 1 200-4200 32 G 1¼ 42640 7 1 4007 04 1 250-5600 40 G 1½ 42650 6 1 4007 05 1 700-9000 50 G2 42660 5 1 4007 06 1 100-600 15 G 1/2 43210 1 1 4007 51 1 150-780 20 G 3/4 43220 0 1 4007 52 1 200-1500 25 G1 43230 9 1 4007 53 1 300-2500 32 G 1¼ 43240 8 1 4007 54 1 400-4700 40 G 1½ 43250 7 1 4007 55 1 600-6100 50 G2 43260 6 1 4007 56 1 - 65 G2½ 44970 3 1 4007 57 1 - 80 G3 44980 2 1 4007 58 1 50-1200 15 G 3/4 43900 1 1 4207 01 1 60-1200 20 G1 43910 0 1 4207 02 1 150-4000 25 G 1¼ 43920 9 1 4207 03 1 200-4200 32 G 1½ 43930 8 1 4207 04 1 250-5600 40 G 1¾ 43940 7 1 4207 05 1 700-9000 50 G 23⁄8 43950 6 1 4207 06 1 Differential pressure controller - 30 KPa Regulating range 5 to 30 Kpa, compact design, dezincification resistant brass body, external thread connection DN 15 and DN 20 with cone, DN 25 up to DN 50 with flat seal. Compression adapters and press connections have to be ordered separately. 50-1300 100-1600 150-2000 200-5000 400-8000 400-9000 15 20 25 32 40 50 G 3/4 G1 G 5/4 G 1½ G 1¾ G 23⁄8 45400 4 45410 3 45420 2 45430 1 45440 0 45450 9 1 4002 41 1 4002 42 1 4002 43 1 4002 44 1 4002 45 1 4002 46 1 1 1 1 1 1 Differential pressure controller - 60 KPa Regulating range 25 to 60 Kpa, compact design, dezincification resistant brass body, external thread connection DN 15 and DN 20 with cone, DN 25 up to DN 50 with flat seal. Compression adapters and press connections have to be ordered separately. 50-1300 100-1600 150-2200 200-7500 500-9000 500-10000 15 20 25 32 40 50 G 3/4 G1 G 5/4 G 1½ G 1¾ G 23⁄8 45500 1 45510 0 45520 9 45530 8 45540 7 45550 6 1 4002 61 1 4002 62 1 4002 63 1 4002 64 1 4002 65 1 4002 66 1 1 1 1 1 1 50-900 15 Model 4007 Differential Pressure Controller with threaded sockets. Proportional controller, for two-pipe systems with thermostatic radiator valves. Differential pressure 50–300 mbar, continuously adjustable. Dezincification resistant brass body, pipe connection with threaded pipe connection on both sides, including capillary 1000 mm. 2 bores 1/4, with screw plug 1 0273 00. Drain valve 276 has to be ordered separately. 4007 differential pressure controller FIX threaded sleeve FWW Proportional controller for two-pipe systems with Thermostatic radiator valves. Differential pressure 23 kPa fixed, brass body, Both sides with threaded pipe connection, including Pulse line 1000. 2 bores 1/4, with screw plug 1 0273 00. Drain cock 276 is to be ordered separately. 4207 Differential Pressure Controller with male thread. Proportional controller, with external thread, for twopipe systems with thermostatic radiator valves. Differential pressure 50–300 mbar, continuously adjustable. Dezincification resistant brass body, pipe connection with external thread on both sides, including capillary 1000 mm. 2 bores 1/4, closed with screw plug 1 0273 00. Drain valve, 276 has to be ordered separately. Soldering and welding connections and threaded bushes are to be ordered separately. HERZ-DPCV HERZ-DPCV 4002 FIX Differential pressure controller 4002 FIX Differential pressure 23 Kpa fixed, without pre adjustment. Compact design, dezincification resistant brass body, external thread connection DN 15 and DN 20 with cone, DN 25 up to DN 50 with flat seal. Compression adapters and press connections have to be ordered separately. G 3/4 45300 7 1 4002 21 1 100-1200 20 G1 45310 6 1 4002 22 1 150-1800 25 G 5/4 45320 5 1 4002 23 1 200-4000 32 G 1½ 45330 4 1 4002 24 1 400-6500 40 G 1¾ 45340 3 1 4002 25 1 400-7000 50 G 23⁄8 45350 2 1 4002 26 1 G 3/4 45600 8 1 4002 81 1 100-1200 20 G1 45610 7 1 4002 82 1 150-1800 25 G 5/4 45620 6 1 4002 83 1 200-4000 32 G 1½ 45630 5 1 4002 84 1 1 1 HERZ-DPCV 4002 FIX TS Differential pressure controller 4002 FIX TS Differential pressure 23 Kpa fixed, without pre adjustment. Compact design, dezincification resistant brass body, external thread connection DN 15 and DN 20 with cone, DN 25 up to DN 50 with flat seal. With integrated regulation valve for 2-point control. Thermo-electric drive, compression adapters and press connections have to be ordered separately. 78 50-900 15 400-6500 40 G 1¾ 45640 4 1 4002 85 400-7000 50 G 23⁄8 45650 3 1 4002 86 Heating, Climate Control Product 1 group STRÖMAX-M, Double Regulating Valves, Variable Orifice DRV, Inclined Model Model 4117 M STRÖMAX-M, Double Regulating Valves, inclined model with test points Dezincification Brass version, O Ring, spindle seal. Memory stop by means of an external nut, threaded end connections BSP. DN 15 - DN 20: 2 bores 1/4 with test points, 1 bore 1/4 closed with screw plug 1 0273 09. DN 25 - DN 50: 2 bores 1/4 with test points, 2 bores 1/4 closed with screw plugs 1 0273 09. DN 65 - DN 80: 2 bores 3/8 with test points, 2 bores 3/8 closed with screw plugs 1 0273 00. Handwheel position 1 6517 05 is included. Drain valve 276 has to be ordered separately. Compression adapter: DN 15: Universal models with special sockets for threaded pipes and compression adapters. DN 20: Adapter 1 6266 20 and compression adapter G 3/4. Adapter and compression adapters have to be ordered separately. * LF Minimum kv 0.12 STRÖMAX-M kvs DN EAN 90 04174 Order number Item 4.75* 15 LF 44580 4 1 4117 39 10 4.75 15 40810 6 1 4117 51 10 6.12 20 40820 5 1 4117 52 10 10.4 25 40830 4 1 4117 53 10 15.97 32 40840 3 1 4117 54 5 23.5 40 40850 2 1 4117 55 5 47.89 50 40860 1 1 4117 56 5 84.2 65 40870 0 1 4117 57 1 133.2 80 40800 9 1 4117 58 1 4.75 15 40890 8 1 4117 61 10 6.12 20 40900 4 1 4117 62 10 10.4 25 40910 3 1 4117 63 10 15.97 32 40920 2 1 4117 64 5 23.5 40 40930 1 1 4117 65 5 47.89 50 41180 9 1 4117 66 5 84.2 65 40940 0 1 4117 67 1 133.2 80 40950 9 1 4117 68 1 4.75 15 44330 5 1 4117 21 10 6.12 20 44340 4 1 4117 22 10 10.4 25 44350 3 1 4117 23 10 15.97 32 44360 2 1 4117 24 5 23.5 40 44370 1 1 4117 25 5 47.89 50 44380 0 1 4117 26 5 HERZ-DRV, Inclined Model 4117 R STRÖMAX-R, Double Regulating Valves, inclined model Dezincification Brass version, O Ring, spindle seal Memory stop by means of an external nut, threaded end connections BSP. Handwheel position marker 1 6517 05 is included. Drain valve 276 has to be ordered separately. Compression adapter: DN 15: Universal models with special sockets for threaded pipes and compression adapters. DN 20: Adapter 1 6266 20 and compression adapter G 3/4. Adapter and compression adapters have to be ordered separately. Commissioning set 4117CS when close coupled to Herz 4000 metering station STRÖMAX-R 4117 STRÖMAX STRÖMAX-MR, balancing valve, Inclined Model Dezincification Brass version, O Ring, spindle seal. Memory stop by means of an external nut, threaded end connections BSP. DN 15–DN 50: 2 bores 1/4 closed with screw plugs 1 0273 09. 1 bore 1/4 closed with screw plugs 273. Handwheel position marker 1 6517 05 is included. Drain valve 276 has to be ordered separately. Compression adapter: DN 15: Universal models with special sockets for threaded pipes and compression adapters. DN 20: Adapter 1 6266 20 and compression adapter G 3/4. Adapter and compression adapters have to be ordered separately. 79 Regulating Valves Product 1 group HERZ-Fixed Orifice DRV Model 4017 M HERZ-Fixed Orifice Double Regulating Valve Dezinfication resistant brass body, Handwheel operated, numerical indicator, inside screw non rising handwheel, Memory stop inner spindle, integral fixed orifice, supplied with two test points. Extended test points available 0284-11 blue, 0284-12 red End connections threaded according to ISO 7/1. kvs DN EAN 90 04174 Order number Item 2.00 15 45020 4 1 4017 01 10 0.52 15 LF 45000 6 1 4017 11 10 0.95 15 MF 45010 5 1 4017 21 10 3.60 20 45030 3 1 4017 02 10 6.50 25 45040 2 1 4017 03 10 13.30 32 45050 1 1 4017 04 5 18.50 40 45060 0 1 4017 05 5 33.00 50 45070 9 1 4017 06 5 Dim. EAN 90 04174 Order number Item 15 46270 2 1 4017 61 10 20 46280 1 1 4017 62 10 25 46290 0 1 4017 63 10 32 46300 6 1 4017 64 10 40 46310 5 1 4017 65 5 50 46320 4 1 4017 66 5 15 76540 7 1 7217 36 10 15 76550 6 1 7217 66 10 HERZ-Double Regulating Valve Model 4017 R HERZ-Fixed Orifice Double Regulating Valve Dezinfication resistant brass body, Handwheel operated, numerical indicator, inside screw non rising handwheel, Memory stop inner spindle, drain cock 1 0276 09 have to be ordered separately. DN 15: Adapter 1 6266 01 and compression adapter G 3/4.. DN 20: Adapter 1 6266 20 and compression adapter G 3/4. Adapter and compression adapters have to be ordered separately. HERZ-AS-T-90 Regulating Valve with Test points Regulating Valve AS-T-90, Straight model with test points, Rp (female thread) Dezincification resistant brass body with AS-T-90 thermostatic upper part, adjustment for hydraulic balance of cooling ceiling systems, radiant panels and fan coils. Fitted with two test points 1 0284. Presetting key (1 6800 00)) is to be ordered separately. Pipe connecting both sides with female thread 1/2 for press fitting connection. Regulating Valve AS-T-90, Straight model with test points, G 3/4 male thread Dezincification resistant brass body with AS-T-90 thermostatic upper part, adjustment for hydraulic balance of cooling ceiling systems, radiant panels and fan coils. Fitted with two test points 1 0284. Presetting key (1 6800 00) is to be ordered separately. Pipe connecting both sides with male thread G 3/4 for press fitting connection * Heating, Cooling 80 Regulating Valves Product 1 group HERZ-Regulating Valve for Manual Adjustment and Cooling Ceiling Systems, STRÖMAX-MS kvs DN EAN 90 04174 Order number Item 3.4 15 43770 0 1 4216 21 10 3.4 20 43780 9 1 4216 22 10 3.4 15 43750 2 1 4216 31 10 3.4 20 43760 1 1 4216 32 10 3.4 15 45080 8 1 4216 11 10 3.4 20 45090 7 1 4216 12 10 Regulating Valve for manual adjustment STRÖMAX-MS Screw-down model with compression union connections Dezincification resistant brass body, model for hydraulic balancing of cooling ceiling systems and fan coils. Two test points 1 0284 mounted next to hand wheel, presetting by limitation of valve lift, pipe connection on both sides with external thread and flat seal. Compression adapter for 15 mm copper pipe. 3.4 15 76560 5 1 4216 23 10 Regulating Valve for manual adjustment STRÖMAX-MS Screw-down model with compression union connections Dezincification resistant brass body, model for hydraulic balancing of cooling ceiling systems and fan coils. Two test points 1 0284 mounted next to hand wheel, presetting by limitation of valve lift, pipe connection on both sides with external thread and flat seal. Compression adapter for 22 mm copper pipe. 3.4 20 34772 6 1 4216 24 10 Model Regulating Valve for manual adjustment STRÖMAX-MS Screw-down model with test points, G (male thread) Dezincification resistant brass body, model for hydraulic balancing of cooling ceiling systems and fan coils. Two test points 1 0284 mounted next to hand wheel, presetting by limitation of valve lift, pipe connection on both sides with external thread and flat seal. Regulating Valve for manual adjustment STRÖMAX-MS Screw-down model with test points, Rp (female thread) Dezincification resistant brass body, model for hydraulic balancing of cooling ceiling systems and fan coils. Two test points 1 0284 mounted next to hand wheel, presetting by limitation of valve lift, pipe connection on both sides with female thread Regulating Valve for solar STRÖMAX-4216 with soldering connection. Maximum working temperature 200 °C. For DN 15 the soldering connection is 15 mm. For DN 20 the soldering connection is 22 mm. HERZ-Regulating Valves HERZ-Circuit Regulating Valves for Differential Pressure Measurement, Screw-down Model 4217 GM-BS STRÖMAX-GM, VO Double Regulating Valve Screw-down model with test points. Dezincification resistant brass body, Handwheel operated, Inner spindle memory stop, numerical indicator, inside screw non rising handwheel, End connections threaded BSP. Two test points 1 0284 are fitted. 1.00 15 LF 45800 2 1 4217 30 10 3.67 15 45810 1 1 4217 31 10 6.80 20 42820 0 1 4217 32 10 DN 15: Adapter 1 6266 01 and compression adapter G 3/4. DN 20: Adapter 1 6266 20 and compression adapter G 3/4. 10.00 25 45830 9 1 4217 33 10 20.67 32 45840 8 1 4217 34 5 28.09 40 45850 7 1 4217 35 5 41.38 50 45860 6 1 4217 36 5 Adapter and compression adapters have to be ordered separately. STRÖMAX 81 Regulating Valves Product 1 group HERZ-Circuit Regulating Valves for Differential Pressure Measurement, Screw-down Model Model 4217 GM STRÖMAX-GM STRÖMAX-GM, VO Double Regulating Valve Screw-down model with test points. Dezincification resistant brass body, Handwheel operated, Inner spindle memory stop, numerical indicator, inside screw non rising handwheel, End connections threaded BSP. Two test points 1 0284 are fitted. DN 15 - DN 50: 2 bores 1/4, with screw plugs 1 0273 09. DN 65 - DN 80: 2 bores 3/8, with screw plug 1 0273 00. Presetting seal 1 6517 04 and presetting marker 1 6517 05 are included. Drain valves 271, 276 have to be ordered separately. Compression adapter: DN 15: Adapter 1 6266 01 and compression adapter G 3/4. DN 20: Adapter 1 6266 20 and compression adapter G 3/4. Adapter and compression adapters have to be ordered separately. DN kvs EAN 90 04174 Order number Item 15 6 41640 8 1 4217 01 10 20 6.88 41650 7 1 4217 02 10 25 13.23 41660 6 1 4217 03 10 32 18.91 41670 5 1 4217 04 5 40 27.56 41680 4 1 4217 05 5 50 40.98 41690 3 1 4217 06 5 65 51.2 41700 9 1 4217 07 1 80 70.5 41710 8 1 4217 08 1 15 6 41790 0 1 4217 61 10 20 6.88 41800 6 1 4217 62 10 25 13.23 41810 5 1 4217 63 10 32 18.91 41820 4 1 4217 64 5 40 27.56 41830 3 1 4217 65 5 50 40.98 41840 2 1 4217 66 5 65 51.2 41850 1 1 4217 67 1 80 70.5 41860 0 1 4217 68 1 HERZ-Circuit Regulating Valves Screw-down Model 4217 GR STRÖMAX-GR, Double Regulating Valve Screw-down model Dezincification resistant brass body, Handwheel operated, Inner spindle memory stop, numerical indicator, inside screw non rising handwheel, End connections threaded BSP. DN 15 - DN 50: 2 bores 1/4, with screw plugs 1 0273 09. DN 65 - DN 80: 2 bores 3/8, with screw plug 1 0273 00. Presetting seal 1 6517 04 and presetting marker 1 6517 05 are included. Drain valve 276 has to be ordered separately. Compression adapter: DN 15: Adapter 1 6266 01 and compression adapter G 3/4. DN 20: Adapter 1 6266 20 and compression adapter G 3/4. Adapter and compression adapters have to be ordered separately. STRÖMAX-GR HERZ-Circuit Regulating Valves for Differential Pressure Measurement, Screw-down Model with male thread 4417 GM STRÖMAX-GM 82 STRÖMAX-GM, VO Double Regulating Valve. Screw-down model with test points, pipe connection with external threads. Dezincification resistant brass body, Handwheel operated, Inner spindle memory stop, numerical indicator, inside screw non rising handwheel, End connections threaded BSP. Two test points 1 0284 are fitted. 2 bores 1/4, with screw plug 1 0273 09. Presetting seal 1 6517 04 and presetting marker 1 6517 05 are included. Drain valve 276 has to be ordered separately. Soldering and welding connections and threaded bushes have to be ordered separately. 15 6 43840 0 1 4417 11 5 20 6.88 43850 9 1 4417 12 5 25 13.23 43860 8 1 4417 13 3 32 18.91 43870 7 1 4417 14 3 40 27.56 43880 6 1 4417 15 2 50 40.98 43890 5 1 4417 16 1 Shut off Valves Product 1 group HERZ-Shutoff Valves, Screw-down Model Model 4215 G STRÖMAX-G, Shutoff Valve Screw-down model with end connections threaded BSP. Dezincification resistant brass version, non-rising spindle, spindle seal by means of a double O-Ring. Dimensions as STRÖMAX-GM/GR. Compression adapter: DN 15: Adapter 1 6266 01 and compression adapter G 3/4. DN 20: Adapter 1 6266 20 and compression adapter G 3/4. Adapter and compression adapters have to be ordered separately. STRÖMAX-G 4215 AG STRÖMAX-AG, Shutoff Valve with draining Screw-down model with long threaded sockets. Same as STRÖMAX-G however with 2 bores and screw plug. DN 15 - DN 50: 2 bores 1/4, with screw plug 1 0273 09. DN 65 - DN 80: 2 bores 3/8, with screw plug 1 0273 00. Drain valves 271, 276 have to be ordered separately. Compression adapter: DN 15: Adapter 1 6266 01 and compression adapter G 3/4. DN 20: Adapter 1 6266 20 and compression adapter G 3/4. Adapter and compression adapters have to be ordered separately. STRÖMAX-AG DN kvs EAN 90 04174 Order number Item 15 6.56 41870 9 1 4215 01 10 20 6.56 41880 8 1 4215 02 10 25 12 41890 7 1 4215 03 10 32 21.1 41900 3 1 4215 04 5 40 28.8 41910 6 1 4215 05 5 50 40 41920 1 1 4215 06 5 65 53.4 41930 0 1 4215 07 1 80 77.3 41940 9 1 4215 08 1 15 6.56 41950 8 1 4215 11 10 20 6.56 41960 7 1 4215 12 10 25 12 41970 6 1 4215 13 10 32 21.1 41980 5 1 4215 14 5 40 28.8 41990 4 1 4215 15 5 50 40 42000 9 1 4215 16 5 65 53.4 42010 8 1 4215 17 1 80 77.3 42020 7 1 4215 18 1 15 6.56 44020 5 1 4415 01 5 20 6.56 44030 4 1 4415 02 5 25 12 44040 3 1 4415 03 3 32 21.1 44050 2 1 4415 04 3 40 28.8 44060 1 1 4415 05 2 50 40 44070 0 1 4415 06 1 15 6.56 44080 9 1 4415 11 5 20 6.56 44090 8 1 4415 12 5 25 12 44100 4 1 4415 13 3 32 21.1 44110 3 1 4415 14 3 40 28.8 44120 2 1 4415 15 2 50 40 44130 1 1 4415 16 1 HERZ-Shutoff Valves, Screw-down Model with male thread 4415 G STRÖMAX-G-Shutoff Valve Screw-down model with male thread Dezincification resistant brass version, two external threads with flat seal, non-rising spindle, spindle seal by means of a double O-Ring. Dimensions same as 4417 and 4207. A permanently elastic soft seal is used as a seat seal. Pipe connections by soldering connections 6236 and welding connections 6240 or threaded bushes 6210. Connections have to be ordered separately. STRÖMAX-G 4415 AG STRÖMAX-AG STRÖMAX-AG-Shutoff Valve Screw-down model with male thread Dezincification resistant brass version, two external threads with flat seal, non-rising spindle, spindle seal by means of a double O-Ring. Dimensions same as 4417 and 4207. A permanently elastic soft seal is used as a seat seal. With 2 bores 1/4 for drain fittings, two screw plug 1 0273 09. Drain valve 276 has to be ordered separately. Connections have to be ordered separately. 83 Shut off Valves Product 1 group HERZ- Shutoff Valves “D” Inclined Model with threaded ends spindle seal by means of a double O-Ring kvs DN EAN 90 04174 Order number Item 4.8 15 42030 6 1 4125 61 10 11.5 20 42040 5 1 4125 62 10 21.5 25 42050 4 1 4125 63 10 35.0 32 42060 3 1 4125 64 5 48.0 40 42070 2 1 4125 65 5 80.0 50 42080 1 1 4125 66 5 127.0 65 42090 0 1 4125 67 1 183.0 80 42100 6 1 4125 68 1 4.8 15 42110 5 1 4125 71 10 11.5 20 42120 4 1 4125 72 10 DN 15- DN 50: 2 bores 1/4, with screw plug 1 0273 09. DN 65- DN 80: 2 bores 3/8, with screw plug 1 0273 00. 21.5 25 42130 3 1 4125 73 10 Drain valves 271, 276 have to be ordered separately. Compression union: 35.0 32 42140 2 1 4125 74 5 48.0 40 42150 1 1 4125 75 5 82.0 50 42160 0 1 4125 76 5 127.0 65 42170 9 1 4125 77 1 183.0 80 42180 8 1 4125 78 1 3.0 10 40410 8 1 4115 00 10 4.0 15 40420 7 1 4115 01 10 10.5 DN 15 - DN 50: Universal models with special sockets for threaded pipes and commpression 18.0 units. DN 20: Adapter 1 6266 20 and commpression 32.5 union G 3/4. 44.0 Adapter and commpression unions have to be ordered separately. 87.0 20 40430 6 1 4115 02 10 25 40440 5 1 4115 03 10 32 40450 4 1 4115 04 5 40 40460 3 1 4115 05 5 50 40470 2 1 4115 06 5 112.0 65 40480 1 1 4115 07 1 175.0 80 40490 0 1 4115 08 1 4.0 15 40500 6 1 4115 11 10 10.5 20 40510 5 1 4115 12 10 DN 15 - DN 50: 2 bores 1/4, with screw plugs 1 0273 09. DN 65 - DN 80: 2 bores 3/8, with screw plugs 1 0273 00. 18.0 25 40520 4 1 4115 13 10 32.5 32 40530 3 1 4115 14 5 Drain valve 276 has to be ordered separately. 44.0 40 40540 2 1 4115 15 5 87.0 50 40550 1 1 4115 16 5 112.0 65 40560 0 1 4115 17 1 175.0 80 40570 9 1 4115 18 1 Model 4125 D STRÖMAX D-Shutoff Valve, inclined model, with long threaded ends, new version Dezincification resistant brass body, end connections threaded BSP. Non- rising spindle. Spindle seal by means of flexible double O-rings. DN 15: Universal models with special sockets for threaded pipes and commpression units. DN 20: Adapter 1 6266 20 and commpression union G 3/4. Adapter and commpression unions have to be ordered separately. STRÖMAX-D 4125 AD STRÖMAX-AD, Shutoff valve, inclined model, with long threaded ends and 2 bores, new version. Same as STRÖMAX-D however with 2 bores and screw plug. DN 15: Universal models with special sockets for threaded pipes and compression units. DN 20: Adapter 1 6266 20 and commpression union G 3/4. Adapter and commpression union sets to be ordered separately. STRÖMAX-AD HERZ-Globe Valves, Inclined Model 4115 STRÖMAX-Shutoff Valve, inclined model, spindle seal by means of gland packing, new version. Dezincification resistant brass body, end connections threaded BSP. Upper part sealed in body by means of O-Ring. Commpression union: STRÖMAX 4115 A STRÖMAX-A 84 STRÖMAX-A, Shutoff Valve, inclined model, with spindle seal by means of gland packing and 2 bores, new version. Same as STRÖMAX but with 2 tap holes and screw plug. Shutoff Valves Product 1 group STRÖMAX D-Shutoff Valve, inclined model, with male thread spindle seal by means of a double O-Ring kvs DN EAN 90 04174 Order number Item STRÖMAX-D-Shutoff valves, inclined model, 4.8 pipe connection with male thread. Brass version, two external threads with flat seal, non-rising spindle, spindle seal by means of an elastic 11.5 double O-Ring. Upper part sealed in body by means of O-Ring. Pipe connections by soldering connections 21.5 6236 and weldering connections 6240 or threaded bushes 6220, with 2 union nuts. Soldering and welding 35.0 connections as well as threaded bushes have to be ordered separately. 48.0 15 42930 9 1 4325 61 10 20 42940 8 1 4325 62 10 25 42950 7 1 4325 63 10 32 42960 6 1 4325 64 5 40 42970 5 1 4325 65 5 82.0 50 42980 4 1 4325 66 5 4.8 15 43170 8 1 4325 81 10 Model 4325 D STRÖMAX-D 4325 D STRÖMAX-D-Shutoff valves, inclined model, pipe connection with male thread, for commpression union. Brass version, two external threads with cone seal, non-rising spindle, spindle seal by means of an elastic double O-Ring. Upper part sealed in body by means of O-Ring. Commpression union G 3/4. Commpression unions have to be ordered separately. STRÖMAX-D 4325 AD STRÖMAX-AD-Shutoff valves, inclined model, pipe connection with male thread, with 2 bores. Identical to STRÖMAX-D, however with 2 bores and screw plugs with two union nuts. 4.8 15 42990 3 1 4325 71 10 11.5 20 43000 8 1 4325 72 10 DN 15- DN 50: 2 bores 1/4, with screw plugs 1 0273 09. 21.5 25 43010 7 1 4325 73 10 Drain valves 271, 276 have to be ordered separately separately. Soldering and welding connections as well 35.0 as threaded bushes have to be ordered separately. 32 43020 6 1 4325 74 5 48.0 40 43030 5 1 4325 75 5 82.0 50 43040 4 1 4325 76 5 4.8 15 43180 7 1 4325 91 10 90.0 50 76840 8 1 4115 53 10 STRÖMAX-AD 4325 AD STRÖMAX-AD, Shutoff valve, inclined model, pipe connection with male thread and 2 bores, for commpression union, Identical to STRÖMAX-D, however with 2 bores 1/4 and screw plugs 1 0273 09 mounted. Drain valves 271, 276 have to be ordered separately. STRÖMAX-AD HERZ-Shutoff Valve with fire hose connection Shutoff Valve with fire hose connection HERZ- Shutoff valve for fire hose connection C Male thread G2 is lockable. Especially for fixed type F (fire) to DIN 14461-1 and DIN 14461-6, for Rising mains “wet” and “wet-dry”.Connection of fire water hoses withStorz C coupling in aluminum (DIN 14307) or Ms (DIN 86 204). 85 Ball Valves Product 6 group HERZ Ball Valve DR with lever handle Model HERZ-Ball Valve WRAS Approved Dezincification resistant brass, full bore, machined to a microsmooth finish, Female thread acc. ISO 228 Maximum temperature: 150 °C (water 110 °C). HERZ-Ball Valve with extended spindle WRAS Approved Dezincification resistant brass, full bore, machined to a microsmooth finish, female thread acc. ISO 228 Minimum temeprature: -10 °C (short period -50 °C), water 0.5 °C. Maximum temperature: 130 °C (short period 150 °C), water 110 °C. PN Dim. EAN 383 000282 Order number Item 50 15 9531 1 2190 01 25 50 20 9548 1 2190 02 25 50 25 9555 1 2190 03 16 40 32 9562 1 2190 04 16 40 40 9579 1 2190 05 12 40 50 9586 1 2190 06 8 25 15 8992 1 2190 21 25 25 20 9005 1 2190 22 25 25 25 9012 1 2190 23 16 25 32 9029 1 2190 24 16 25 40 9036 1 2190 25 12 25 50 9043 1 2190 26 8 HERZ-Ball Valve with Compression connections EURO, DR HERZ-Ball Valve with compression ends WRAS Approved Dezincification resistant brass Compression fitting ends to BS 864/2 Maximum pressure: 16 bar (20 °C) Maximum temperature: 120 °C (5 bar). 16 15 9210 1 2190 41 25 16 20 9227 1 2190 42 25 16 25 9234 1 2190 43 16 16 32 9241 1 2190 44 16 16 40 9258 1 2190 45 12 16 50 9265 1 2190 46 8 HERZ Ball Valve with compression ends with extended spindle WRAS Approved Dezincification resistant brass Compression fitting ends to BS 864/2 Maximum pressure: 16 bar (20 °C) Maximum temperature: 120 °C (5 bar). 16 15 9296 1 2190 61 25 16 20 9302 1 2190 62 25 16 25 9319 1 2190 63 16 16 32 9326 1 2190 64 16 16 40 9333 1 2190 65 12 16 50 9340 1 2190 66 8 HERZ-ball valve with union nut and flat sealing connection, EURO, DR PN Dim. EAN 383 896342 Order number Item HERZ-ball valve with union nut and flat sealing connection WRAS Approved Dezincification resistant brass body according to EN 12420, chrome ball Connections according to BS 864 / 2 Maximum pressure 16 bar (20 ° C). Maximum temperature: 120 ° C (5 bar). 16 15 0644 1 2190 71 25 16 20 0651 1 2190 72 25 16 25 0668 1 2190 73 16 16 32 0675 1 2190 74 16 16 40 0682 1 2190 75 12 16 50 0699 1 2190 76 8 Ball valve with Extended spindle, union nut and flat sealing connection WRAS Approved Dezincification resistant brass body EN 12420, chrome ball Connections to BS 864 / 2 Maximum pressure 16 bar (20 ° C). Maximum temperature: 120 ° C (5 bar). 16 15 0705 1 2190 81 25 16 20 0712 1 2190 82 25 16 25 0729 1 2190 83 16 16 32 0736 1 2190 84 16 16 40 0743 1 2190 85 12 16 50 0750 1 2190 86 8 Model Herz-ball valve with lever handle and press connection Ball valve with lever handle and press connection Dezincification resistant brass body according to DIN 17660, Press connections at both ends for multi-layered composite pipe. 86 15-16 x 2.0 9654 P 7216 62 50 15-18 x 2.0 9661 P 7218 62 50 15-20 x 2.0 9678 P 7220 62 50 25-26 x 3.0 9715 P 7226 62 50 16 Flanged Regulating Valves Product 1 group HERZ-Differential Pressure Controllers, Flanged Version Model 4007 F Differential Pressure Controller, flanged version Proportional controller for two-pipe systems with thermostatic radiator valves. Differential pressure 50–300 mbar, continuously adjustable. Body made of cast iron GJL 250 according to EN 1561, flange according to EN 1092, PN 16, length according to ÖNORM EN 551-1, basic series 1, blue enamel coating. Pipe connection with flange on both sides, including capillary 1,000 mm. Four bores Rp 3/8, with drain plug. Drain valve 276 has to be ordered separately. Differential Pressure Controller, 4007 F FIX flanged version Proportional controller for two-pipe systems with thermostatic radiator valves. Differential pressure fixed at 23 kPa. Body made of cast iron GJL 250 according to EN 1561, flange according to EN 1092, PN 16, length according to ÖNORM EN 551-1, basic series 1, blue enamel coating. Pipe connection with flange on both sides, including capillary 1,000 mm. Four bores Rp 3/8, with drain plug. Drain valve 276 has to be ordered separately. l/h DN Dim. EAN 90 04174 Order number Item 1504000 25 1 43610 9 1 4007 13 1 2004200 32 1¼ 43620 8 1 4007 14 1 2505600 40 1½ 43630 7 1 4007 15 1 7009000 50 2 43640 6 1 4007 16 1 2001500 25 1 43650 5 1 4007 63 1 3002500 32 1¼ 43660 4 1 4007 64 1 4004700 40 1½ 43670 3 1 4007 65 1 6006100 50 2 43680 2 1 4007 66 1 HERZ-Circuit Regulating Valves for Differential Pressure Measurement, Flanged Version Screw-down Model with test points Model 4218 GMF STRÖMAX-GMF kvs STRÖMAX-GMF, Circuit Regulating Valve for differential pressure measurement, flanged version, with test points. Body made of cast iron GJL 250 according to EN 1561, flange according to EN 1092, PN 16, length according to ÖNORM EN-558-1, basic series 1, blue enamel coating. Dezincification resistant brass upper part, with non-rising spindle. Spindle seal by means of double O-Ring. Two test points 1 0284 are mounted next to the hand wheel. Four bores Rp 3/8 with drain plug, presetting seal 1 6517 04 and presetting marker 1 6517 05 are included. Drain valve 276 has to be ordered separately. DN Dim. EAN 90 04174 Order number Item 12.2 25 43570 6 1 4218 43 1 17.3 32 43580 5 1 4218 44 1 28.6 40 43590 4 1 4218 45 1 38.0 50 43350 4 1 4218 46 1 60.3 65 43360 3 1 4218 47 1 68.5 80 43370 2 1 4218 48 1 100 100 46200 9 1 4218 49 1 - 125 46210 8 1 4218 50 1 HERZ-Shutoff Valves, Flanged Version 4218 AGF STRÖMAX-AGF STRÖMAX-AGF-Shutoff Valve, flanged version Body made of cast iron GJL 250 according to EN 1561, flange according to EN 1092, PN 16; length according to ÖNORM EN-558-1, basic series 1, blue enamel coating. Valve upper part made of brass. Non-rising spindle, spindle seal by means of double O-Ring. Dimensions as STRÖMAX-GMF. A permanently elastic soft seal is used as a seat seal. With four bores Rp 3/8, with drain plug. Drain valve 276 has to be ordered separately. 11.0 25 1 43690 1 1 4218 53 1 20.1 32 1¼ 43700 7 1 4218 54 1 30.4 40 1½ 43710 6 1 4218 55 1 36.9 50 2 43720 5 1 4218 56 1 62.5 65 2½ 43730 4 1 4218 57 1 75.0 80 3 43740 3 1 4218 58 1 87 Flanged & Butterfly Valves Product 1 group HERZ-Circuit Regulating Valves for Differential Pressure Measurement, Flanged Version Screw-down Model Model 4218 GF STRÖMAX-GF kvs STRÖMAX-GF, Double Regulating Valve flanged version Screw-down model with test points. Cast iron body GJL 250 according to EN 1561, flange according to EN 1092, PN 16, length according to ÖNORM EN-558-1, basic series 1, blue enamel coating. Valve upper part made of cast iron GJL 250, with non-rising spindle. Spindle seal by means of triple O-Ring. Presetting step is shown on the digital display. Test points 1 0284 and presetting marker 1 6517 05 are included. Test points position optional. DN Dim. EAN 90 04174 Order number Item 48,5 50 44240 7 1 4218 70 1 75 65 44250 6 1 4218 71 1 110 80 44260 5 1 4218 72 1 165 100 44270 4 1 4218 73 1 241 125 44280 3 1 4218 74 1 372 150 44290 2 1 4218 75 1 704 200 44300 8 1 4218 76 1 812 250 44310 7 1 4218 77 1 1383 300 44320 6 1 4218 78 1 48,5 50 44670 2 1 4218 80 1 65 44680 1 1 4218 81 1 STRÖMAX-GF, Double Regulating Valve flanged version 75 Screw-down model with test points. 110 Cast iron body GJL 250 according to EN 1561, flange according to EN 1092, PN 16, length 165 according to ÖNORM EN-558-1, basic series 1, 241 blue enamel coating. Valve upper part made of cast iron GJL 250, with non-rising spindle. 372 Spindle seal by means of double O-Ring. 704 Presetting step is shown on the digital display. Test points 1 0284 and presetting marker 812 1 6517 05 are included. Test points position 1383 optional. 80 44690 0 1 4218 82 1 100 44700 6 1 4218 83 1 125 44710 5 1 4218 84 1 150 44720 4 1 4218 85 1 200 44730 3 1 4218 86 1 250 44740 2 1 4218 87 1 300 44750 1 1 4218 88 1 65 – 4218-71CS 1 Cast Iron Commissioning Set STRÖMAX-GF Cast Iron Commissioning Set 4218 close coupled to HV2740 orifice plate 93 126 80 – 4218-72CS 1 244 100 – 4218-73CS 1 415 125 – 4218-74CS 1 540 150 – 4218-75CS 1 1010 200 – 4218-76CS 1 1450 250 – 4218-77CS 1 2400 300 – 4218-78CS 1 HERZ-Flow Measuring Orifice Plate* Stainless steel disc with extended test points Maximum working temperature 120 °C Maximum static pressure 16 bar Kv-values, also pressure and temperature ratings, comply with requirements of BS7350 Kv-values in m3/hour at a pressure drop of 1 bar. 100.7 65 – HV2740-07 1 133.8 80 – HV2740-08 1 237.7 100 – HV2740-09 1 339 125 – HV2740-10 1 511 150 – HV2740-11 1 858 200 – HV2740-12 1 *) only in UK 1235 250 – HV2740-13 1 1793 300 – HV2740-14 1 HERZ-Flow Measuring Orifice Plate 88 Flanged & Butterfly Valves Product 1 group HERZ-Butterfly Valves Semi lugged version, Lever operated drive PN 16 Model HV Butterfly Valve, semi lugged version, WRAS Approved Body made of grey cast iron JL 1040, acc. to EN 1561, blue coated, hand lever made of pressed steel CF8M Stainless steel disk, EPDM liner and sealing, model with 4 to 8 lugs. Operating pressure 16 bar, operating temperature range: -10 °C to 120 °C. For dimensions DN 250 and DN 300 the max. operating pressure is 10 bar. kvs DN EAN 90 04174 Order number Item 116 50 – HV-BF-SLL-06 1 190 65 – HV-BF-SLL-07 1 260 80 – HV-BF-SLL-08 1 517 100 – HV-BF-SLL-09 1 880 125 – HV-BF-SLL-10 1 1376 150 – HV-BF-SLL-11 1 2702 200 – HV-BF-SLL-12 1 4600 250 – HV-BF-SLL-13 1 7107 300 – HV-BF-SLL-14 1 116 50 – HV-BF-FLL-06 1 190 65 – HV-BF-FLL-07 1 260 80 – HV-BF-FLL-08 1 517 100 – HV-BF-FLL-09 1 880 125 – HV-BF-FLL-10 1 1376 150 – HV-BF-FLL-11 1 2702 200 – HV-BF-FLL-12 1 4600 250 – HV-BF-FLL-13 1 7107 300 – HV-BF-FLL-14 1 HERZ-Butterfly Valves Fully lugged version, Lever operated drive PN 16 HV Butterfly Valve, fully lugged version, WRAS Approved Body made of SG iron JS 1030, acc. to EN 1563, blue coated, hand lever made of pressed steel CF8M Stainless steel disk, EPDM liner and sealing, model screwed lugs suitable for flange PN 16. Operating pressure 16 bar, operating temperature range: -10 °C to 120 °C. For dimensions DN 250 and DN 300 the max. operating pressure is 10 bar. Gear operated drive PN 16 HV Butterfly Valve, semi lugged version, WRAS Approved Body made of grey cast iron JL 1040, acc.to EN 1561, blue coated. Gearbox with chromium plated steel input shaft, Ductie Iron gear segment, adjustable travel stops. CF8M Stainless steel disk, EPDM liner, model with 4 to 8 lugs. Operating pressure 16 bar DN 50 to DN 200 Operating pressure 10 bar DN 250 to DN 300 Operating temperature -10 °C to 120 °C. HV Butterfly Valve, Fully lugged version, WRAS Approved Body made of ductile cast iron JS 1030, acc. to EN 1563, blue coated. Gearbox with chromium plated steel input shaft, Ductie Iron gear segment, adjustable travel stops. CF8M Stainless steel disk, EPDM liner, model with fully tapped lugs. Operating pressure 16 bar DN 50 to DN 200 Operating pressure 10 bar DN 250 to DN 300 Operating temperature -10 °C to 120 °C. Operating pressure 10 bar DN 250 to DN 300 Operating temperature -10 °C to 120 °C. 116 50 – HV-BF-SLG-06 1 190 65 – HV-BF-SLG-07 1 260 80 – HV-BF-SLG-08 1 517 100 – HV-BF-SLG-09 1 880 125 – HV-BF-SLG-10 1 1376 150 – HV-BF-SLG-11 1 2702 200 – HV-BF-SLG-12 1 4600 250 – HV-BF-SLG-13 1 7107 300 – HV-BF-SLG-14 1 116 50 – HV-BF-FLG-06 1 190 65 – HV-BF-FLG-07 1 260 80 – HV-BF-FLG-08 1 517 100 – HV-BF-FLG-09 1 880 125 – HV-BF-FLG-10 1 1376 150 – HV-BF-FLG-11 1 2702 200 – HV-BF-FLG-12 1 4600 250 – HV-BF-FLG-13 1 7107 300 – HV-BF-FLG-14 1 All Butterfly Valves are available with electric, pneumatic or hydraulic drives. 89 Strainers Product 1 group HERZ-Strainer, Mesh Width 0.75 mm Model HERZ-Strainer, Y-shape, with flanged connection. With fine-mesh screen made of chrome-nickel steel. Mesh width 0.75 mm. Cast iron body GJL 250 according to EN 1561, flange according to EN 1092, PN 16; length according to ÖNORM EN 558-1, basic series 1, with blue enamel coating Cover with drain bore and drain plug 1/2. Four bores Rp 1/4 with drain plug for differential pressure measurement. Test points 1 0284 01 and 1 0284 02 have to be ordered separately. HERZ-Strainer, Y-shape, with flanged connection. With fine-mesh screen made of chrome-nickel steel.* Cast iron body GJL 250 according to EN 1561, flange according to EN 1092, PN 16; Mesh width DN100 - DN150: d = 1,5 mm DN 200 - DN 300: d = 2 mm DN Dim. EAN 90 04174 Order number Item 25 1 44140 0 1 4111 83 1 32 1¼ 44150 9 1 4111 84 1 40 1½ 44160 8 1 4111 85 1 50 2 44170 7 1 4111 86 1 65 2½ 44180 6 1 4111 87 1 80 3 44190 5 1 4111 88 1 100 4 – HV185-09 1 125 5 – HV185-10 1 150 6 – HV185-11 1 200 8 – HV185-12 1 250 10 – HV185-13 1 300 12 – HV185-14 1 15 1/2 – HVCH25-01 1 20 3/4 – HVCH25-02 1 25 1 – HVCH25-03 1 32 1¼ – HVCH25-04 1 40 1½ – HVCH25-05 1 50 2 – HVCH25-06 1 50 2 – HVWC25-06 1 65 2½ – HVWC25-07 1 80 3 – HVWC25-08 1 100 4 – HVWC25-09 1 125 5 – HVWC25-10 1 150 6 – HVWC25-11 1 200 8 – HVWC25-12 1 250 10 – HVWC25-13 1 300 12 – HVWC25-14 1 50 – HV5153-06 1 65 – HV5153-07 1 80 – HV5153-08 1 100 – HV5153-09 1 125 – HV5153-10 1 150 – HV5153-11 1 200 – HV5153-12 1 250 – HV5153-13 1 300 – HV5153-14 1 *) only in UK HERZ-Swing Check Valve Herz Swing Check Valve PN 25 Body, Cap & Hinge made of Gunmetal BS 1400 LG2 Brass Disk Maximum Pressure 25 bar Temperature range -10 °C to 180 °C. Herz Wafer Check Valve PN 16 Cast Iron body to 1561 EN - JL1030 Disk, Shaft & Spring made of Stainless Steel EPDM Seat Maximum Pressure 16 bar Temperature range -10 °C to 120 °C. HERZ-Check Valve HERZ-Check Valve* For heating, hydraulic and industrial installations, for all non aggressive fluids such as water and oil products. Body made of cast iron EN-GJL 250, cover made of cast iron EN-GJL 250, disc - cast iron EN-GJL 250, seat rings made of brass. Temperature range -10 to +120 °C Maximum pressure 16 bar. Flange according EN 1092-2 PN16 *) only in UK 90 Hydraulic Interface Units Product 8 group HERZ-Hydraulic Interface Units EAN 90 04174 Order number Item The HERZ-DE LUXE Substation Compact substation for radiator heating and drinking water systems, utilising a countercurrent heat exchanger made of stainless steel. In standby mode a temperature regulated bypass guarantees available primary flow at the heat exchanger. Central controller for hot water only operates as a pressure drop is detected when a hot tap is opened. Safety against scalding by integrated HERZ-thermostatic mixing valve. Differential pressure controller with fixed DP fitted on the heating circuit can be operated as a zone valve with a thermo electric drive for regulating the room temperature. Heat meters can be retrofitted as required. Strainer with fine-mesh screen is also fitted on the heating circuit to protect the DP controller. Premounting unit with ball valves for the later connection of the substation. Usable as in- or onwall substation with separate cover. Necessary inwall adjustment unit or external cover have to be ordered separately. Static pressure of cold water 3.5 bar at minimum. Hot water flow rate 14 l/min (10/52 °C). Max. working pressure 10 bar. Max. riser temperature 90 °C. The HERZ premounting unit for the HERZ-DE LUXE substation 1 4008 04 has to be ordered separately. 68000 7 1 4008 25 1 The HERZ DE LUXE light Substation Compact substation for radiator heating and drinking water systems. Individual module DE LUXE Light. Individual module for DHW, water and space heating. In standby mode a temperature regulated bypass guarantees available primary flow at the heat exchanger. Central controller for hot water only operates as a pressure drop is detected when a hot tap is opened. The module includes a HERZ-Control valve incorporating a thermostat with immersion sensor,which maintains a maximum DHW temperature, a strainer with fine mesh is also fitted. It also provides adapters for installation of flowmeter, water- and heat meters. Individual module HERZ DE LUXE Light can be combined with the following sets of equipment: 68110 3 1 4008 50 1 Package space heater 1: Equipped with thermal zone valve and actuator for room temperature control 1 4018 02 1 The “Space heating” 2: Equipped with differential pressure control valve fixed at 23 kPa 1 4018 03 1 The “Space heating” 3: Equipped with differential pressure control valve fixed at 23 kPa can be operated as a zone valve with a hermo electric drive for regulating the room temperature. 1 4018 04 1 The “Comfort”: Equipped with a distribution system HERZ DE LUXE Light bypass valve in the heating circuit to ensure readiness to work in the summer. 1 4018 00 1 The “Reliability”: Set mixing valve to protect against overheating of hot water. Case for concealed HERZ DE LUXE or protective cover for the module HERZ DE LUXE ordered separately. 1 4018 01 1 The HERZ-STANDARD Substation Compact substation for radiator heating and drinking water systems, utilising a countercurrent heat exchanger made of stainless steel. In standby mode a temperature regulated bypass guarantees available primary flow at the heat exchanger. Central controller for hot water only operates as a pressure drop is detected when a hot tap is opened. Safety against scalding by integrated HERZ-thermostatic mixing valve. Differential pressure controller with fixed DP is fitted on the heating circuit. Heat meters can be retro-fitted as required. Strainer with fine-mesh screen is also fitted on the heating circuit to protect the DP controller. Connection by premounted ball valves. Usable as in- or onwall substation with separate cover. Necessary inwall adjustment unit has to be ordered separately. Static pressure of cold water 3.5 bar at minimum. Hot water flow rate 14 l/min (10/52 °C). Max. working pressure 10 bar. Max. riser temperature 90 °C. 68010 6 1 4008 23 1 The HERZ- substation”OC”. Compact substation for radiator heating and drinking water systems, utilising a countercurrent heat exchanger made of stainless steel. In standby mode a temperature regulated bypass guarantees available primary flow at the heat exchanger. Central controller for hot water only operates as a pressure drop is detected when a hot tap is opened. Hot water temperature regulated by thermostat with immersion sensor. Differential pressure controller with fixed DP fitted on the heating circuit can be operated as a zone valve with a thermo electric drive for regulating the room temperature. Heat meters can be retro-fitted as required. Strainer with fine mesh screen is also fitted on the heating circuit to protect the DP controller. Connection by premounted ball valves. Usable as in- or onwall substation with separate cover. Necessary inwall adjustment unit has to be ordered separately. Hot water flow rate 12 l/min (10/45 °C). Pressure drop 25kPa Max. working pressure 10 bar. Max. riser temperature 90 °C. Necessary Additional details for the distribution system HERZ - inwall unit for HERZ substations Number 1 4008 06 HERZ cover for HERZ s 1 4008 08. 68100 4 1 4008 49 1 68020 5 1 4008 21 1 68160 8 1 4008 18 1 Model The HERZ PROJECT Substation Compact substation for radiator heating and drinking water systems, utilising a countercurrent heat exchanger made of stainless steel. Central controller for hot water only operates as a pressure drop is detected when a hot tap is opened. Safety against scalding by integrated HERZ thermostatic mixing valve. Heat meters can be retro-fitted as required. Usable as in- or onwall substation with separate cover. Necessary inwall adjustment unit has to be ordered separately. Static pressure of cold water 3.5 bar at minimum. Hot water flow rate 14 l/min (10/52 °C). Max. working pressure 10 bar. Max. riser temperature 90 °C. Additional parts for adapting with a bypass for substation project Additional parts for adapting the substation project, including strainer, thermostatic valve with return temperature limiter and pipe form pieces. 91 Hydraulic Interface Units Product 8 group HERZ-Hydraulic Interface Units EAN 90 04174 Order number Item Compact substation FWW Compact substation for radiator heating and drinking water systems, utilising a countercurrent heat exchanger made of stainless steel. In standby mode a temperature regulated bypass guarantees available primary flow at the heat exchanger. Central controller for hot water only operates as a pressure drop is detected when a hot tap is opened. Safety against scalding by integrated HERZ thermostatic mixing valve. Hot water temperature regulated by thermostat with immersion sensor. A zone valve is fitted on the heating circuit with a thermo-electric drive for regulating the room temperature. Heat meters can be retro-fitted as required. Premounting unit with ball valves for the later connection of the substation. Usable as in- or onwall substation with separate cover. Necessary inwall adjustment unit or external cover have to be ordered separately. Static pressure of cold water 2.8 bar at minimum. Hot water flow rate 10 l/min (10/52 °C). Pressure drop 25 kPa. Max. working pressure 10 bar. Max. riser temperature 90 °C. The HERZ premounting unit for the HERZ de lux substation 1 4008 04 has to be ordered separately. HERZ inwall unit for HERZ substations 1 4008 06 or HERZ cover for HERZ substations 1 4008 08 have to be ordered separately. 68040 3 1 4008 31 1 substation GSWB Compact substation for radiator heating and drinking water systems, utilising a countercurrent heat exchanger made of stainless steel. In standby mode a temperature regulated bypass guarantees available primary flow at the heat exchanger. Return temperature limiter fitted to control heating return temperature. Central controller for hot water only operates as a pressure drop is detected when a hot tap is opened. Hot water temperature regulated by thermostat with immersion sensor. Differential pressure controller with fixed DP fitted on the heating circuit. Water meter and Heat meter fitted. Strainer with fine mesh screen is also fitted on the heating circuit to protect the DP controller. Hot water flow rate 15 l/min (5/55 °C). Pressure drop 25 kPa. Max. working pressure 10 bar. Max. riser temperature 90 °C. The necessary additional elements: In-wall version for HERZsubstation GSWB 1 4008 40. Protective cover Surface-mounted version for the HERZ- substation GSWB 1 4008 42. Condensate trap for the HERZ- substation GSWB 1 4008 41. Premounting unit for HERZ -substation GSWB 1 4008 34. 68050 2 1 4008 33 1 68130 1 1 4008 34 1 68170 7 1 4008 19 1 68060 1 1 4008 40 1 68070 0 1 4008 42 1 68080 9 1 4008 45 1 68090 8 1 4008 46 1 Model HERZ-Premounting unit for HERZ- substation GSWB . Retro-fit heat meter connection set Additional items for retrofitting the sub stations “GSWB”, consisting of heat meters and pipe fittings. HERZ inwall unit for GSWB substations Made of zinc coated steel B x H x D 545 x 960 x 192 mm, fixing parts included., with mounting frame Front frame and door white, powder coated (RAL 9003). HERZ cover for HERZ GSWB substations Made of steel white powder coated, fixing parts included for HERZ substations GSWB. Front frame and door white, powder coated (RAL 9003), door with catch b x H x D 500 x 850 x 200 mm. Substation ITPS Compact substation for radiator heating and drinking water systems, utilising a countercurrent heat exchanger made of stainless steel. In standby mode a temperature regulated bypass guarantees available primary flow at the heat exchanger. Central controller for hot water only operates as a pressure drop is detected when a hot tap is opened. Hot water temperature regulated by thermostat with immersion sensor. Differential pressure controller with fixed DP fitted on the heating circuit can be operated as a zone valve with a thermo-electric drive for regulating the room temperature. Heat meters can be retro-fitted as required. Strainer with fine mesh screen is also fitted on the heating circuit to protect the DP controller. Hot water flow rate 12 l/min (10/45 °C). Pressure drop 25 kPa Max. working pressure 10 bar. Max. riser temperature 90 °C. The necessary additional elements: HERZ- in-wall unit for HERZ substations ITPS 1 4008 06. HERZ-cover in-wall unit for HERZ substations ITPS 1 4008 08 Premounting unit for HERZ-substation ITPS 1 4008 46. Premounting unit for HERZ substation ITPS. 92 Hydraulic Interface Units Product 8 group HERZ-Hydraulic Interface Units Model HERZ- substation Version DE LUXE Indirect Compact substation for radiator heating and drinking water systems, utilizing two separate countercurrent heat exchangers made of stainless steel for domestic hot and space heating water. A zone valve is fitted on the heating circuit with a thermo-electric drive which controls the primary heating water into the second heat exchanger and a pump is fitted to ensure constant circulation round the heating system. In standby mode a temperature regulated bypass guarantees available primary flow at the domestic water heat exchanger. Central controller for hot water only operates as a pressure drop is detected when a hot tap is opened. Safety against scalding by integrated HERZ thermostatic mixing valve. Hot water temperature regulated by thermostat with immersion sensor. Strainer with fine mesh screen is also fitted on the heating circuit. Substation to be used in low-temperature heating. HERZ-Bracket for mounting the substation DE LUXE Indirectly is not included. Min. pressure of cold water 2,8 bar, capacity 15 l / min, thermal power 10 kW HERZ- in-wall unit or HERZ cover for HERZ substations have to be ordered separately. EAN 90 04174 Order number Item 68030 4 1 4008 26 1 68120 2 1 4008 04 1 68140 0 1 4008 06 1 68150 9 1 4008 08 1 Accessories Premounting unit for HERZ-DE LUXE substation Supplied as mounting plate with holes, completed by ball valves for heating, cold- and hot water, connection possible from the wall, or from the bottom, the connection to the substation is done by inserting and screwing connections at the pipe side, fixing parts included. HERZ-inwall unit for HERZ substations Made of zinc coated steel, with mounting frame. For HERZ substations De LUXE, STANDARD or PROJECT. Front frame and door white, powder coated (RAL 9003), door with catch. W x H x D 650 x 850 x 200 mm, fixing parts included. HERZ-cover for HERZ substations Made of steel white powder coated, for HERZ substations De LUXE, STANDARD or PROJECT. W x H x D 500 x 800 x 200 mm. 93 Hydraulic Interface Units Product 8 group HERZ-Hydraulic Interface Units EAN 90 04174 Order number Item HERZ-Water heater DE LUXE Compact water heater, Utilising a countercurrent heat exchanger made of stainless steel. In standby mode a temperature regulated bypass guarantees available primary flow at the heat exchanger. Central contoller for hot water only operates as a pressure drop is detected when a hot tap is opened. Safety against scalding by integrated HERZ thermostatic mixing valve. Premounting unit with ball valves for the later connection of the water heater. Usable as in- or onwall unit with separate cover. Necessary inwall adjustment unit or external cover have to be ordered separately. Static pressure of cold water 3.5 bar at minimum. Hot water flow rate 14 l/min (10/52 °C). Max. working pressure 10 bar. Max. riser temperature of the heating media 90 °C. The HERZ premounting unit for the HERZ de lux substation 1 4008 05 has to be ordered separately. 68180 6 1 4008 11 1 HERZ-Water heater STANDARD Compact water heater, utilising a countercurrent heat exchanger made of stainless steel. In standby mode a temperature regulated bypass guarantees available primary flow at the heat exchanger. Central controller for hot water only operates as a pressure drop is detected when a hot tap is opened. Safety against scalding by integrated HERZ-thermostatic mixing valve. Connection by premounted ball valves. Usable as in- or onwall unit with separate cover. Necessary inwall adjustment unit or external cover have to be ordered separately. Static pressure of cold water 3.5 bar at minimum. Hot water flow rate 14 l/min (10/52 °C). Max. working pressure 10 bar. Max. riser temperature of the heating media 90 °C. 68190 5 1 4008 13 1 HERZ-Water heater PROJECT Compact water heater, utilising a countercurrent heat exchanger made of stainless steel. In standby mode a temperature regulated bypass guarantees available primary flow at the heat exchanger. Central controller for hot water only operates as a pressure drop is detected when a hot tap is opened. Safety against scalding by integrated HERZ thermostatic mixing valve. Usable as in- or onwall unit with separate cover. Necessary accessories, inwall adjustment unit, or external cover have to be ordered separately. Static pressure of cold water 3.5 bar at minimum. Hot water flow rate 14 l/min (10/52 °C). Max. working pressure 10 bar. Max. riser temperature of the heating media 90 °C. 68200 1 1 4008 15 1 HERZ-Premounting unit for HERZ Water Heater DE LUXE Supplied as mounting plate with holes, completed by ball valves for heating, cold- and hot water, connection possible from the wall, or from the bottom, the connection to the water heater is done by inserting and screwing connections at the pipe side, fixing parts included. 68210 0 1 4008 05 1 68220 9 1 4008 07 1 68230 8 1 4008 09 1 68240 7 1 4008 17 1 Model Accessories HERZ-nwall unit for HERZ Water heaters Made of zinc coated steel, with mounting frame. For HERZ water heaters De LUXE, STANDARD or PROJECT. Front frame and door white, powder coated (RAL 9003), door with catch. W x H x D 500 x 850 x 200 mm, fixing parts included. HERZ-cover for HERZ Water heaters Made of steel white powder coated, for HERZ water heaters DE LUXE, STANDARD or PROJECT. W x H x D 500 x 800 x 200 mm. Additional parts for adapting the water heater Additional parts for adapting the water heater PROJECT, including strainer, thermostatic valve with return temperature limiter and pipe form pieces. *) Only Available in Germany 94 Hydraulic Interface Unit Spare parts Spare parts for HERZ HIU EAN 90 04174 Order number Item Pressure and Temperature Controller Control valve, automatic function without requiring auxiliary power, regulates the temperature of hot water from a heat exchanger in individual systems within a district heating scheme. Temperature control via thermostat with contact sensor, thermostat be ordered separately. Maximum operating pressure 10 bar. Max operating temperature 90 °C. 68250 6 1 4008 00 1 Pressure and Temperature Controller DE LUXE, STANDARD with thermostat. 68260 5 1 4008 10 1 Pressure and Temperature Controller Control valve, automatic function without requiring auxiliary power, regulates the temperature of hot water from a heat exchanger in individual systems within a district heating scheme. Maximum operating pressure 10 bar. Max operating temperature 90 °C. 68270 4 1 4008 03 1 68280 3 1 9421 28 1 Universal Ball Valve G 3/4 for DE LUXE HIU 1/2 plug, Red thumb-grip handle. 68290 2 1 2420 02 25 Universal Ball Valve G 3/4 for DE LUXE HIU 1/2 plug, Red thumb-grip handle. 68300 8 1 2420 12 25 68310 7 1 2420 22 25 Universal Ball Valve G 3/4 for DE LUXE HIU 1/2 plug, Red thumb-grip handle. 68320 6 1 2420 03 25 Universal Ball Valve G 3/4 for DE LUXE HIU 1/2 plug, green thumb-grip handle. 68330 5 1 2420 13 25 68340 4 1 2420 23 25 59930 9 2 7766 40 1 DN EAN 90 04174 Order number Item 15 – TMV01 1 15 – TMV+15 1 20 – TMV+22 1 Model Thermostatic head with hydrosensor 52 °C, M 28, capillary tube, pipe contact sensor and fastening materials for attaching to pipes. Ball Valve Straight type G 3/4 Standard HIU Red thumb-grip handle. Ball Valve Straight type G 3/4 Standard HIU green thumb-grip handle. HERZ-Mixing valve MIX 025 with amended flow direction 25 l/min, 3 bar of water pressure, with water quantity min. 4 l/min, factory setting of mixing temperature 52 °C ±2K mixing precision,temperature max. 90 °C, pressure 10 bar. HERZ-Thermostatic mixing valves Model HERZ-Shield TMV3 in-line mixing valve* Available with 22 mm compression connections as standard, or 15 mm using the reducing sets supplied. Integral removable check valves. Flat faced union couplings and strainers are included. The valve is factory preset to 43 °C. Complies with NHS model engineering specification DO8 also WRAS & TMV3 Minimum mixed temperature 30 °C. Maximum mixed temperature 50 °C. Maximum static pressure 12 bar HERZ-Shield Plus TMV3 with integral ball valves Available as 15 or 22 mm complete with integral ball valves with filters. Integral removable check valves. Flat faced union couplings are included. The valve is factory preset to 43 °C. Complies with NHS model engineering specification DO8, TMV3 & WRAS Minimum mixed temperature 30 °C. Maximum mixed temperature 50 °C. Maximum static pressure 10 bar 95 Sanitary valves Product 1 group HERZ-Mixing valves for drinking water Model HERZ-Mixing valve MIX 160 with two-way flow direction 42 l/min, 3 bar of water pressure, with water quantity min. 4 l/min, factory setting of mixing temperature 38–48 °C ± 2K mixing precision, temperature max. 90 °C, pressure 10 bar. DN l/min EAN 90 04174 Order number Item 20 59980 4 2 7766 54 1 42 Product 6 group HERZ-Ball valves for flush mounting Model Ball valve for flush mounting Dezincification resistant brass according to DIN 17660 with seals PTFE and EPDM. Temperature range -10 °C to 110 °C (water from 0 °C 110 °C). Ball valve for flush mounting with lever handle Dezincification resistant brass according to DIN 17660 with seals PTFE and EPDM. Temperature range -10 °C to 110 °C (water from 0 °C 110 °C). PN Dim. EAN 383 000282 Order number Item 16 15 6691 1 2202 01 50 16 20 6707 1 2202 02 50 16 15 6714 1 2202 11 50 16 20 6721 1 2202 12 50 Product 3 group HERZ-Ball valves for flush mounting with press connectors Ball valve for flush mounting Dezincification resistant brass according to EN 12420. Press connectors for aluminum composite pipe. cover of pressed chrome-plated brass, Full bore. 16 15-16 x 2.0 70350 8 P 7216 63 25 15-20 x 2.0 70360 7 P 7220 63 25 20-26 x 3.0 70370 6 P 7226 63 25 Product 6 group HERZ-Drain valve Ball valve for water drainage, with connection for hose, with lever handle. Dezincification resistant brass, nickel plated. Teflon seal, two O-Ring and the bore. Application in horticulture, hydro and sanitary facilities. Temperature range is 0 °C to +110 °C. 16 15 7230 1 2503 01 50 16 20 7247 1 2503 02 50 EAN 38 38963 Order number Item 600527 UH10052 50 601517 UH10151 50 601524 UH10152 50 552512 UH05251 12 HERZ-Drain valves Model Wall-mounted tap Body made of forged brass, an aerator. Length to drain spout 95 mm. Wall-mounted tap Body made of forged brass. Length to drain spout 95 mm. Wall-mounted tapt for washing machine. Body made of forged brass, Plug for hose connection. Kitchen tap - «S» shaped spout. Body made of forged brass. Seamless tube - Ø 18. The length of the drain spout to connect the hose from 150 mm to 185 mm. 96 Flow Temperature Control Product 1 group HERZ-Circulation Temperature Controller Model HERZ-Circulation Temperature Controller Thermostatic flow control valve for pumped return hot water distribution systems. Inclined model, dezincification resistant brass body and water bearing parts. Socket thread according to ISO 7/1 (Rp), model with two thermostats. Factory settings 52 °C and 70 °C (2 4011 01 and 2 4011 02) Factory settings 55 °C and 70 °C (2 4011 11 and 2 4011 12) When the control temperature is reached the valve is closed by the thermostat to a small bleed (to prevent deadlegs forming). When a temperature of 70 °C, plus, is reached (pasteurisation) the valve is opened to full flow by the second thermostat. Socket x socket, for 15 mm copper pipe, compression adapter 1 6292 01 has to be ordered separately. WRAS approved, Certificate No. 0510070. Temperature DN EAN 90 04174 Order number Item 52/70 15 43790 8 2 4011 01 20 52/70 20 43800 4 2 4011 02 20 55/70 15 43795 3 2 4011 11 20 55/70 20 43805 9 2 4011 12 20 58/70 15 40650 8 2 4011 17 20 58/70 20 40660 7 2 4011 18 20 HERZ-Circulation Temperature Controller for District Heating Plants Model HERZ-Circulation Temperature Controller for district heating plants Thermostatic flow control valve for limiting water flow temperature with circulating pump, in the form of a proportional controller. Inclined model, dezincification resistant brass body and water bearing parts. Socket thread according to to ISO 7/1 (Rp), Factory setting at 52 °C, secured against excess temperatures up to 90 °C. For rising temperatures the valve cone is closed via the thermostatic element. For decreasing temperatures, the valve cone is opened via an opening spring. Compression adapters 1 6292 01 for 15 mm copper pipe, and 1 6092 01 for 16 x 2.0 mm plastic pipe have to be ordered separately. HERZ-Circulation Temperature Controller for district heating plants Thermostatic flow control valve for limiting water flow temperature with circulating pump, in the form of a proportional controller. Inclined model, dezincification resistant brass body and water bearing parts. Cone, valve spindles, springs and guide parts stainless steel. Factory setting at 52 °C, secured against excess temperatures up to 90 °C. For rising temperatures the valve cone is closed via the thermostatic element. For decreasing temperatures, the valve cone is opened via an opening spring. Complete with ball valve. Socket thread according to to ISO 7/1 (Rp). kvs DN EAN 90 04174 Order number Item 0.4 15 44200 1 2 4010 51 20 0.4 20 44210 0 2 4010 52 20 0.4 15 44940 6 2 4010 41 20 0.4 20 44960 4 2 4010 42 20 44950 5 2 4011 51 1 Legionella protection: HERZ-LEGIOFIX HERZ-LEGIOFIX independently-working without auxiliary power module allows Legionella flushing / circulation, according to ÖNORM B 5019 up to 6 m from each sampling point. Normal operation: bypass closed; Flow runs through mixing valve with a mixed temperature of 55 degrees. Legionella flushing: bypass open; Flow with temperature disinfection of the module at 70 degrees. When flushing has completed, the unit automatically resets to normal operation. All water-carrying parts made of brass alloy. Supplied with white plastic cover. 97 Sanitary Product 1 group HERZ-Balancing Valves for hydronic balancing in drinking water installations in buildings, inclined model with female thread Model 4117 MW STRÖMAX- MW balancing valve inInclined model with female thread,with measuring valves, Rp (female thread) Dezincification resistant brass, yellowVersion, two measuring valves 0284 mounted. * On both sides threaded ends according to ISO 7/1 * Draining is possible. Drain fittings have to be ordered separately. * Two test points for measuring the differential pressure. * O Ring, spindle seal Memory stop by means of an external nut, threaded end connections BSP. * 2 Measuring valves for measuring pressure drop. STRÖMAX-MW 4117 RW STRÖMAX-RW 98 STRÖMAX- RW balancing valve inInclined model with female thread, without measuring valves, Rp (female thread) Dezincification resistant brass, yellow version * On both sides threaded ends according to ISO 7/1 * Draining is possible. Drain fittings have to be ordered separately. * Two test points for measuring the differential pressure. * O Ring, spindle seal Memory stop by means of an external nut, threaded end connections BSP. min. l/s DN EAN Order 90 04174 number 0.42 15 43380 1 2 4117 51 5 0.54 20 43390 0 2 4117 52 5 0.91 25 43400 6 2 4117 53 5 1.40 32 43410 5 2 4117 54 5 2.06 40 43420 4 2 4117 55 1 4.21 50 43430 3 2 4117 56 1 0.42 15 43440 2 2 4117 61 5 0.54 20 43450 1 2 4117 62 5 0.91 25 43460 0 2 4117 63 5 1.40 32 43470 9 2 4117 64 1 2.06 40 43480 8 2 4117 65 1 4.21 50 43490 7 2 4117 66 1 Item Sanitary Product 1 group HERZ-Straight pattern Shutoff valves with draining min. Pipe DN Ø mm l/s EAN 90 04174 Order number Item 46230 6 2 4215 00 10 46000 5 2 4215 01 10 46010 4 2 4215 02 10 46020 3 2 4215 03 10 46240 5 2 4215 10 10 46030 2 2 4215 11 10 46040 1 2 4215 12 10 – 46050 0 2 4215 20 10 0.20 15 15 46060 9 2 4215 21 10 0.40 20 18 46070 8 2 4215 22 10 0.70 25 22 46250 4 2 4215 23 10 HERZ-Shutoff valve, straight pattern 0.20 15 – 46080 7 2 4215 31 10 female x female thread 0.40 20 – 46090 6 2 4215 32 10 0.70 25 – 46100 2 2 4215 33 10 1.20 32 – 46110 1 2 4215 34 5 1.60 40 – 46120 0 2 4215 35 5 2.70 50 – 46130 9 2 4215 36 5 0.20 15 – 46140 8 2 4215 41 10 0.40 20 – 46150 7 2 4215 42 10 0.70 25 – 46160 6 2 4215 43 10 1.20 32 – 46170 5 2 4215 44 5 1.60 40 – 46180 4 2 4215 45 5 2.70 50 – 46190 3 2 4215 46 5 0.20 15 – 46260 3 2 4215 61 10 Model 4215 AW 4215 AW HERZ-Shutoff valve, straight pattern soldered end x male thread, both sides have been drilled, dezincification resistant brass, a plug has been mounted Volumen flow class VA, ÖNORM EN 1213. Max.operation temperature 90 °C. Max. operation pressure 10 bar max. differential pressure on closed seat 10 bar. accessory: 2 0275 09 charging &draining valves have to be ordered separately. 0.2 15 15 HERZ-Shutoff valve, straight pattern 0.20 15 15 soldered end x male thread + braze screwed, both sides have been drilled, a plug has been mounted, dezincification resistant brass, seal (from standard acceptable Material) Volume flow class VA, ÖNORM 0.40 20 18 EN 1213. Max. operation temperature 90 °C. Max. operaion pressure, 10 bar max. Differential pressure on closed seat 10 bar. accessory: 2 0275 09 charging 0.70 25 22 & draining valves have to be ordered separately. HERZ-Shutoff valve, straight pattern with female x male thread both sides have been drilled, a plug has been mounted, dezincification resistant brass. Volumen flow class VA, 0.20 15 ÖNORM EN 1213. Max. operation temperature 90 °C. Max. operation pressure, 10 bar max. Differential pressure on closed seat 10 bar. accessory: 2 0275 09 charging & draining valves have to be ordered separately. 4215 AW 4215 AW 4215 AW 4215 AW – HERZ-Shutoff valve, straight pattern female x male thread + soldered union both sides have been drilled, a plug has been mounted, 0.20 15 15 dezincification resistant brass, seal (from standard aceptable material). Volumen flow class VA, ÖNORM EN 1213. Max. operation temperature 90 °C. Max. operation pressure, 10 bar max. Differential pressure 0.40 20 18 on closed seat 10 bar. accessory: 2 0275 09 charging & draining valves have to be ordered separately. HERZ-Shutoff valve, straight pattern male thread x male thread both sides have been drilled, a plug has been mounted dezincification resistant brass. Volumen flow class VA, ÖNORM EN 1213. Max. operation temperature 90 °C. Max. operation pressure, 10 bar max. Differential pressure on closed seat 10 bar. accessory: 2 0275 09 charging & draining valves have to be ordered separately. HERZ-Shutoff valve, straight pattern male thread x male thread + soldered union both sides have been drilled,a plug has been mounted dezincification resistant brass,yellow model seal (from standard acceptable material). Volumen flow class VA, ÖNORM EN 1213. Max. operation temperature 90 °C. Max. operation pressure, 10 bar max. Differential pressure on closed seat 10 bar. accessory: 2 0275 09 charging & draining valves have to be ordered separately. both sides have been drilled, a plug has been mounted dezincification resistant brass. Volumen flow class VA, ÖNORM EN 1213 Max. operation temperature 90 °C. Max. operation pressure, 10 bar. Max. Differential pressure on closed seat 10 bar accessory: 2 0275 09 charging & draining valves have to be ordered separately. 0.20 15 HERZ-Shutoff valve, Straight pattern without draining 4215 W 4215 W HERZ-Shutoff valve, straight pattern female x female thread, without draining without drilling, dezincification resistant brass, Volumen flow class VA, ÖNORM EN 1213 Max. operation temperature 90 °C Max. operation pressure, 10 bar max. Differential pressure on closed seat 10 bar. HERZ-Shutoff valve, straight pattern with female x male thread without draining without drilling, dezincification resistant brass. Volumen flow class VA, ÖNORM EN 1213 Max. operation temperature 90 °C. Max. operation pressure, 10 bar max. Differential pressure on closed seat 10 bar. 99 Sanitary Product 1 group Shutoff Valve for Drinking Water Systems in buildings, inclined model Model W1.332 4125 WD STRÖMAX-AW-Shutoff Valve, inclined model Rp (female thread) Dezincification resistant brass, * on both sides threaded ends according to ISO 7/1, draining is not possible. * not rising spindle, Spindle seal from elastic double O-Ring, Upper part is sealed by O-Ring seal im body. * The sealing material is made of satndards acceptable material. * Volume flow class VB, fittings group I, according to ÖNORM EN 1213. W1.332 STRÖMAX-AW-Shutoff Valve, inclined model Rp (female thread) Dezincification resistant brass, * Two bores 1/4 and one screw plug 1 0273 09 is mounted. * Threaded ends on both sides according to ISO 7/1. * Draining is possible. Drain fittings have to be ordered separately. * not rising spindle, Spindle seal from elastic double O-Ring, Upper part is sealed by O-Ring seal im body. * The sealing material is made of satndards acceptable material. * Volume flow class VB, fittings group I, according to ÖNORM EN 1213. Certified and registered acc. ÖVGW. min. l/s DN EAN 90 04174 Order number Item 0.5 15 44510 1 2 4125 61 5 1.0 20 44520 0 2 4125 62 5 1.75 25 44530 9 2 4125 63 5 3.0 32 44540 8 2 4125 64 5 4.0 40 44550 7 2 4125 65 5 6.75 50 44560 6 2 4125 66 5 11.0 65 44570 5 2 4125 67 1 16.0 80 44580 4 2 4125 68 1 0.5 15 42780 0 2 4125 71 5 1.0 20 42790 9 2 4125 72 5 1.75 25 42800 5 2 4125 73 5 3.0 32 42810 4 2 4125 74 5 4.0 40 42820 3 2 4125 75 5 6.75 50 42830 2 2 4125 76 5 11.0 65 42840 1 2 4125 77 1 16.0 80 42850 0 2 4125 78 1 HERZ-Shutoff Valves for Drinking Water Systems, Inclined Model with female threaded ends W1.331 4115 AW STRÖMAX-AW W1.331 STRÖMAX-AW-Shutoff Valve, inclined model with threaded ends, Rp (female thread) Dezincicfication resistant brass. DN 10 - 50: Two bores 1/4 and screw plugs 1 0273 09. DN 65 and 80: Two bores 3/8 and screw plug 1 0273 00 mounted. * Threaded ends on both sides according to ISO 7/1. * Draining is possible, drain fittings have to be ordered separately. * The rising valve spindle is permanently sealed by means of a double O-Ring. * The sealing material is made of satndards acceptable material. * Volume flow class VB, fittings group I, according to ÖNORM EN 1213. 0.25 10 42690 2 2 4115 00 10 0.5 15 42700 8 2 4115 11 10 1.0 20 42710 7 2 4115 12 10 1.75 25 42720 6 2 4115 13 10 3.0 32 42730 5 2 4115 14 5 4.0 40 42740 4 2 4115 15 5 6.75 50 42750 3 2 4115 16 5 11.0 65 42760 2 2 4115 17 1 Certified and registered acc. ÖVGW. 16.0 80 42770 1 2 4115 18 1 STRÖMAX-W-Shutoff Valve, inclined model with threaded ends, Rp (female thread) Dezincicfication resistant brass. * Threaded ends on both sides according to ISO 7/1. * The rising valve spindle is permanently sealed by means of a double O-Ring. * The sealing material is made of satndards acceptable material. * Volume flow class VB, fittings group I, according to ÖNORM EN 1213. 0.5 15 44430 2 2 4115 01 10 1.0 20 44440 1 2 4115 02 10 1.75 25 44450 0 2 4115 03 10 3.0 32 44460 9 2 4115 04 5 4.0 40 44470 8 2 4115 05 5 6.75 50 44480 7 2 4115 06 5 11.0 65 44490 6 2 4115 07 1 16.0 80 44500 2 2 4115 08 1 Certified and registered acc. ÖVGW. 100 Sanitary Product 1 group HERZ kit for connection of water meters DN EAN 90 04174 Order number Item HERZ kit for connection of water meters according to ÖNORM B 2535. Installation kit for the water meter with Bracket made of galvanized steel. - Shut-off valve before the water meter - Check valve after the water meter. 20 45130 0 2 4126 62 1 25 45100 3 2 4126 63 1 32 45140 9 2 4126 64 1 40 45150 8 2 4126 65 1 50 45160 7 2 4126 66 1 HERZ- Backflow preventer Dezincification resistant brass body,, brass version, * 2 bores 1 / 4 and a screw plug 1 0273 09 screwed. * Both sides are female threaded according to ISO 7 / 1. * Possible draining function, the equipment for draining function are be ordered separately. * Non-rising spindle, spindle seal by means of elastic double O-ring, the upper part wiht O-ring sealed in the body. * Seal materials consist of physiologically harmless material. * Flow Class VB, product group I, according to ÖNORM EN 1213th. 15 45130 0 2 4126 01 5 20 45110 2 2 4126 02 5 25 45120 1 2 4126 03 5 32 45460 8 2 4126 04 5 40 45470 7 2 4126 05 1 50 45480 6 2 4126 06 1 Model Product 6 group HERZ-Pressure Reducer Model Diaphragm Pressure Reducer Forged brass version, EPDM diaphragm and seal, G thread, with plastic cap. Suitable for heating systems to protect boiler against increased pressure. For all nonagressive fluids such as water, oil, air, steam, fuel and lubricating oil. Working temperature 0 °C to +70 °C. PN DN EAN 383 000282 Order number Item 16 15 7582 1 2682 01 18 16 20 7599 1 2682 02 18 16 25 7827 1 2682 03 18 16 32 7834 1 2682 04 18 DN Dim. EAN Order number Item HERZ-Pressure Reducing Valves Model HERZ-Pressure Reducing Valve PN 16 Body made of gunmetal, male BSP union Stainless Steel Spring, NBR seals & Diaphragm Max inlet pressure 25 bar Adjustable pressure range 1.5–6 bar Max Temperature 80 °C. According to BS EN 1567 WRAS Approved. HERZ-Pressure Reducing Valve PN 16 Body made of DZR Brass, compression ends Stainless Steel Spring, NBR seals & Diaphragm Max inlet pressure 25 bar Adjustable pressure range 1–6 bar Max Temperature 80 °C. According to BS EN 1567 WRAS Approved. 15 1/2 – HVPRV-01 1 20 3/4 – HVPRV-02 1 25 1 – HVPRV-03 1 32 1¼ – HVPRV-04 1 40 1½ – HVPRV-04 1 50 2 – HVPRV-06 1 15 15 – HVPRVC-11 1 20 22 – HVPRVC-12 1 101 Sanitary Product 1 group HERZ-Ball Valves Model Ball Valve with green duraluminium handle. Dezincification resistant brass according to DIN 17660, sealing material is made of standards acceptable material, female thread connection. Free of dead space by flushing behind the ball with protected seat seal. Medium temperature range to 85 °C for drinking water. Ball valve with a green T-handle, DZR. Housing Forged brass alloy according to DIN 17660, Seal materials are made of physiologically acceptable material. Dead space by flushing behind ball, with abrasion-proof seal seat. The application area is Temperatures to 85 °C for drinking water. PN DN EAN 383 000282 Order number Item 16 15 9593 2 2100 01 25 16 20 9609 2 2100 02 25 16 25 9616 2 2100 03 16 16 30 9623 2 2100 04 16 16 40 9630 2 2100 05 12 16 50 9647 2 2100 06 8 16 15 9869 2 2100 11 25 16 20 9826 2 2100 12 25 16 25 9883 2 2100 13 16 16 32 9890 2 2100 14 16 16 15 9524 1 2110 01 25 16 20 9425 1 2110 02 25 3/4 20 9746 1 2623 02 25 1 25 9753 1 2623 03 25 1½ 32 9760 1 2623 04 16 DN Dim. EAN Order number Item 15 1/2 – HVDCV-01 20 3/4 – HVDCV-02 25 1 – HVDCV-03 32 1¼ – HVDCV-04 40 1½ – HVDCV-05 50 2 – HVDCV-06 15 15 – HVDCVC-11 20 22 – HVDCVC-12 25 28 – HVDCVC-13 HERZ-Ball Valves HERZ Ball Valve with Check Valve Dezincification resistant brass according to DIN 17660, Seals is from PTFE and EPDM Temperature of the medium from -10 till +90 °C. Water from 0 till +90 °C HERZ-Backflow preventer HERZ- Backflow preventer According to EN 1717, safety device to prevent backflows, pressures and suction of polluted water into the buildings supply line or also different and unfamiliar component parts. KIWA Accreditation, medium water, housing and parts in contact with water made of dezincification brass, works noiseless and it doesn’t produce any hammer blow (pressure surges). Two 1/4 openings for the functional control. HERZ-Double Check Valves Model HERZ-Double Check Valve PN 16 Body made of DZR Brass, screwed BSP ends Stainless Steel Spring, NBR seals Pressure range 0.1 bar - 16 bar Max Temperature 85 °C. According to BS6282: Part 1 WRAS Approved. HERZ-Double Check Valve PN 16 Body made of DZR Brass, compression ends Stainless Steel Spring, NBR seals Pressure range 0.1 bar - 16 bar Max Temperature 85 °C. According to BS6282: Part 1 WRAS Approved. 102 Sanitary Product 1 group Shutoff Valve for Drinking Water Systems in buildings, inclined model, with male thread min. l/s Model W1.331 4315 AW 4315 AW STRÖMAX-AW EAN 90 04174 Order number Item 15 43050 3 2 4315 11 10 20 43060 2 2 4315 12 10 25 43070 1 2 4315 13 10 32 43080 1 2 4315 14 5 40 43090 9 2 4315 15 5 6.75 50 43100 5 2 4315 16 5 0.5 15 43190 6 2 4315 91 10 STRÖMAX-AW - Shutoff Valve for Drinking Water, 0.5 inclined model, with male thread Dezincification resistant brass, brass version. * Two bores 1/4 and one screw plug 1 0273 09 is 1.0 mounted with 2 pieces of nuts. * Two male flah sealed at both ends. * Draining is possible. Drain fittings have to be ordered 1.75 separately. * The rising valve spindle is permanently sealed by 3.0 means of a double O-Ring. * The sealing material is made of standards acceptable material. 4.0 * Volume flow class VB, fittings group I, according to ÖNORM EN 1213. STRÖMAX-AW W1.331 DN STRÖMAX-AW - Shutoff Valve for Drinking Water, inclined model, with male thread Dezincification resistant brass, brass version. * Two bores 1/4 and one screw plug 1 0273 09 is mounted * Two male 3/4 with cone both ends. * Draining is possible. Drain fittings have to be ordered separately. * The rising valve spindle is permanently sealed by means of a double O-Ring. * The sealing material is made of standards acceptable material. * Volume flow class VB, fittings group I, according to ÖNORM EN 1213. Shutoff Valve for Drinking Water Systems in buildings, inclined model, with male thread W1.332 4325 AWD STRÖMAX-AWD - Shutoff Valve for Drinking Water, inclined model, with male thread, flat sealing connection Dezincification resistant brass, brass version. * Two bores 1/4 and one screw plug 1 0273 09 is mounted with 2 pieces of nuts. DN 65 and 80. * Two male thread are flat seal. * Draining is possible. Drain fittings have to be ordered separately. * The non-rising valve spindle is permanently sealed by means of a double O-Ring. Upper part is sealed by O-Ring seal im body. * The sealing material is made of standards acceptable material. * Volume flow class VB, fittings group I, according to ÖNORM EN 1213. STRÖMAX-AWD W1.332 4325 AWD STRÖMAX-AWD STRÖMAX-AWD - Shutoff Valve, inclined model, with male thread Dezincification resistant brass, brass version. * Two bores 1/4 and one screw plug 1 0273 09 is mounted * Two male thread are conical sealed * Draining is possible. Drain fittings have to be ordered separately. * The non-rising valve spindle is permanently sealed by means of a double O-Ring. Upper part is sealed by O-Ring seal im body. * The sealing material is made of standards acceptable material. * Volume flow class VB, fittings group I, according to ÖNORM EN 1213. 0.5 15 43110 4 2 4325 71 5 1.0 20 43120 3 2 4325 72 5 1.75 25 43130 2 2 4325 73 5 3.0 32 43140 1 2 4325 74 5 4.0 40 43150 2 2 4325 75 5 6.75 50 43160 9 2 4325 76 5 0.5 15 43200 2 2 4325 91 10 103 Gas Product 6 group Ball valves for gas Model Ball valve with steel lever Forged brass body according to EN 12165, with O-ring seals (ball and spindle), female thread connection. Suitable for gas installations according to table DIN-DVGW G.260, PN1 (HTB 650 °C/30 min), GT. Medium temperature range -20 °C to 60 °C. Gas Approved to EN331. Ball valve with steel T-handle Forged brass body according to EN 12165, with O-ring seals (ball and spindle), female thread connection. Suitable for gas installations according to table DIN-DVGW G.260, PN1 (HTB 650 °C/30 min), GT. Medium temperature range -20 °C to 60 °C. Gas Approved to EN331. Ball valve with steel lever Forged brass body according to EN 12165, with O-ring seals (ball and spindle), male x female thread connection. Suitable for gas installations according to table DIN-DVGW G.260, PN1 (HTB 650 °C/30 min), GT. Medium temperature range -20 °C to 60 °C. Ball valve with steel T-handle Forged brass body according to EN 12165, with O-ring seals (ball and spindle), male x female thread connection. Suitable for gas installations according to table DIN-DVGW G.260, PN1 (HTB 650 °C/30 min), GT. Medium temperature range -20 °C to 60 °C. Ball valve with steel T-handle Forged brass body according to EN 12165, with O-ring seals (ball and spindle), male x female thread connection. Suitable for gas installations according to table DIN-DVGW G.260, PN1 (HTB 650 °C), GT. Medium temperature range -20 °C to 60 °C. Ball valve with steel lever Forged brass body according to EN 12165, with O-ring seals (ball and spindle), male x female thread connection. Suitable for gas installations according to table DIN-DVGW G.260 table, PN1 (HTB 650 °C), GT. Medium temperature range -20 °C to 60 °C. 104 EAN 383 000282 Order number Item DN 8 8008 1 2300 09 25 DN 10 8015 1 2300 00 25 DN 15 8022 1 2300 01 25 8039 1 2300 02 25 DN 25 8046 1 2300 03 20 DN 32 8053 1 2300 04 16 DN 40 8060 1 2300 05 8 DN 50 8077 1 2300 06 4 DN 8 8091 1 2300 19 25 DN 10 8107 1 2300 10 25 8114 1 2300 11 25 DN 20 8121 1 2300 12 25 DN 25 8138 1 2300 13 20 DN 32 8145 1 2300 14 16 DN 8 8169 1 2301 09 25 DN 10 8176 1 2301 00 25 DN 15 8183 1 2301 01 25 8190 1 2301 02 25 DN 25 8206 1 2301 03 20 DN 32 8213 1 2301 04 16 DN 40 8220 1 2301 05 8 DN 50 8237 1 2301 06 4 DN 8 8251 1 2301 19 25 DN 10 8268 1 2301 10 25 8275 1 2301 11 25 DN 20 8282 1 2301 12 25 DN 25 8299 1 2301 13 20 DN 32 8305 1 2301 14 16 DN 8 8497 1 2303 19 25 DN 10 8503 1 2303 10 25 8510 1 2303 11 25 DN 20 8527 1 2303 12 25 DN 25 8534 1 2303 13 20 DN 32 8541 1 2303 14 16 DN 8 8404 1 2303 09 25 DN 10 8411 1 2303 00 25 DN 15 8428 1 2303 01 25 8435 1 2303 02 25 DN 25 8442 1 2303 03 20 DN 32 8459 1 2303 04 16 DN 40 8466 1 2303 05 8 DN 50 8473 1 2303 06 4 Dim. PN MOP DN 20 1 5 DN 15 1 5 DN 20 1 5 DN 15 1 5 DN 15 1 5 DN 20 1 5 Gas Product 6 group Ball valves for gas Model EAN 383 000282 Order number Item 8329 1 2302 01 25 8336 1 2302 02 25 DN 25 8343 1 2302 03 20 DN 15 8367 1 2302 11 25 8374 1 2302 12 25 8381 1 2302 13 20 EAN 383 896342 Order number Item 0910 1 2362 21 25 0927 1 2362 22 25 0934 1 2362 23 20 0941 1 2362 31 25 Dim. Ball valve with steel lever Forged brass body according to EN 12165, with O-ring seals (ball and spindle), female thread connection. Suitable for gas installations according to table DIN-DVGW G.260, PN1 (HTB 925 °C, 60 min.), GT. Medium temperature range -20 °C to 60 °C. Ball valve with steel T-handle Forged brass body according to EN 12165, with O-ring seals (ball and spindle), female thread connection. Suitable for gas installations according to table DIN-DVGW G.260, PN1 (HTB 925 °C, 60 min.), GT. Medium temperature range -20 °C to 60 °C. PN MOP DN 15 DN 20 DN 20 1 1 5 5 DN 25 Ball valve for connecting devices with plastic handle Model Dim. Ball valve for connecting devices with plastic handle, straighway Brass body according EN 12165, nickel, with double O-ring seal for spindle, Ball with Teflon seals, IG x conical sealing screw plug with male thead, Security operation by pressing and turning the handle. Suitable for gas installations for DIN-DVGW G 260. Nominal pressure PN 1; Operating temperature -20 °C to +60 °C, with thermal safety device (TAS) resistant against 925 °C / 60 min PN MOP DN 15 DN 20 1 5 DN 25 HERZ-Ball valve for connecting devices, straightway Ball valve for connecting devices with plastic handle, straighway Brass body according EN 12165, nickel, with double O-ring seal for spindle, Ball with Teflon seals, IG x conical sealing Iron pipe connection screw plug with male thead, Security operation by pressing and turning the handle. Suitable for gas installations for DIN-DVGW G 260. Nominal pressure PN 1; Operating temperature -20 °C to +60 °C, with thermal safety device (TAS) resistant against 925 °C / 60 min DN 15 1 5 105 Gas Product 1 6 group Ball valves for gas Model Dim. PN MOP EAN 383 000282 Order number Item DN 10 1 5 8565 1 2362 00 25 DN 10 1 5 8589 1 2372 01 25 DN 10 1 5 8602 1 2362 10 25 DN 10 1 5 8626 1 2372 11 25 Ball valve with security closing T-handle Forged brass body according to EN 12165, nickel platted, with teflon seals, two spindle O-Rings, male thread connection. Suitable for gas installations according to table DIN-DVGW G.260. Medium temperature range -20 °C to 60 °C. Ball valve with security closing T-handle Forged brass body according to EN 12165, nickel platted, with teflon seals, two spindle O-Rings, male x female thread connection. Suitable for gas installations according to table DIN-DVGW G.260. Medium temperature range -20 °C to 60 °C. Ball valve with duraluminium T-handle Forged brass body according to EN 12165, nickel platted, with teflon seals, two spindle O-Rings, male thread connection. Suitable for gas installations according to table DIN-DVGW G. 260. Medium temperature range -20 °C to 60 °C. Ball valve with duraluminium T-handle Forged brass body according to EN 12165, nickel platted, with teflon seals, two spindle O-Rings, male x female thread connection. Suitable for gas installations according to table DIN-DVGW G. 260. Medium temperature range -20 °C to 60 °C. 106 Gas Product 6 group HERZ-Ball valves for gas Dim. PN MOP EAN 383 896342 Order number Item Ball valve for connecting devices with plastic handle, straighway Brass body according EN 12165, nickel, with double O-ring seal for spindle, Ball with Teflon seals, female thread x conical sealing Iron pipe connection screw plug with weld end, Security operation by pressing and turning the handle. Suitable for gas installations for DIN-DVGW G 260. Nominal pressure PN 1; Operating temperature -20 ° C to +60 ° C, with thermal safety device (TAS) resistant against 650 ° C / 30 min. DN 15 1 5 0958 1 2363 01 25 Ball valve for connecting devices with plastic handle, straighway Brass body according EN 12165, nickel, with double O-ring seal for spindle, Ball with Teflon seals, female thread x conical sealing Iron pipe connection screw plug with male thead, Security operation by pressing and turning the handle. Suitable for gas installations for DIN-DVGW G 260. Nominal pressure PN 1; Operating temperature -20 ° C to +60 ° C, with thermal safety device (TAS) resistant against 650 °C / 30 min. DN 15 1 5 0965 1 2363 11 25 0972 1 2362 41 25 0989 1 2362 42 25 0996 1 2362 43 25 Model Ball valve for connecting devices with plastic handle, angle Brass body according EN 12165, nickel, with double O-ring seal for spindle, Ball with Teflon seals, male thread x conical sealing Iron pipe connection screw plug with male thead, Security operation by pressing and turning the handle. Suitable for gas installations for DIN-DVGW G 260. Nominal pressure PN 1; Operating temperature -20 ° C to +60 ° C, with thermal safety device (TAS) resistant against 650 ° C / 30 min. DN 15 DN 20 1 5 DN 25 Ball valve for connecting devices with plastic handle, angle Brass body according EN 12165, nickel, with double O-ring seal for spindle, Ball with Teflon seals, male thread x conical sealing Iron pipe connection screw plug with male thead, Security operation by pressing and turning the handle. Suitable for gas installations for DIN-DVGW G 260. Nominal pressure PN 1; Operating temperature -20 ° C to +60 ° C, with thermal safety device (TAS) resistant against 925 °C / 60 min. DN 15 1 5 1009 1 2362 51 25 Ball valve for connecting devices with plastic handle, angle Brass body according EN 12165, nickel, with double O-ring seal for spindle, Ball with Teflon seals, female thread x conical sealing Iron pipe connection screw plug with male thead, Security operation by pressing and turning the handle. Suitable for gas installations for DIN-DVGW G 260. Nominal pressure PN 1; Operating temperature -20 ° C to +60 ° C, with thermal safety device (TAS) resistant against 650 °C / 30 min. DN 15 1 5 1016 1 2363 21 25 Ball valve for connecting devices with plastic handle, angle Brass body according EN 12165, nickel, with double O-ring seal for spindle, Ball with teflon seals, female thread x conical sealing Iron pipe connection screw plug with male thead, Security operation by pressing and turning the handle. Suitable for gas installations for DIN-DVGW G 260. Nominal pressure PN 1; Operating temperature -20 ° C to +60 ° C, with thermal safety device (TAS) resistant against 650 °C / 30 min. DN 15 1 5 1023 1 2363 31 25 107 Gas Product 6 group HERZ-Ball valves for gas Model EAN 383 000282 Order number Item DN 10 8640 1 2304 00 25 DN 15 8657 1 2304 01 25 8664 1 2304 02 25 8671 1 2304 03 20 DN 32 8688 1 2304 04 16 DN 40 8695 1 2304 05 8 DN 50 8701 1 2304 06 4 DN 10 8725 1 2304 10 25 DN 15 8732 1 2304 11 25 8749 1 2304 12 25 DN 25 8756 1 2304 13 20 DN 32 8763 1 2304 14 16 DN 10 8787 1 2305 00 25 DN 15 8794 1 2305 01 25 DN 20 8800 1 2305 02 25 8817 1 2305 03 20 DN 32 8824 1 2305 04 16 DN 40 8831 1 2305 05 8 DN 50 8848 1 2305 06 4 DN 10 8862 1 2305 10 25 DN 15 8879 1 2305 11 25 8886 1 2305 12 25 DN 25 8893 1 2305 13 16 DN 32 8909 1 2305 14 8 DN 15 1030 1 2000 01 25 DN 20 8923 1 2000 02 25 1047 1 2000 03 20 DN 32 1054 1 2000 04 16 DN 40 1061 1 2000 05 8 DN 50 1078 1 2000 06 4 DN 15 8947 1 2319 01 25 8954 1 2319 02 25 8961 1 2319 03 20 Dim. Ball valve with steel lever Forged brass body according to EN 12165, nickel platted, with teflon seals, two spindle O-Rings, female thread connection. Suitable for gas installations according to table DIN-DVGW G. 260. Medium temperature range -20 °C to 60 °C. Ball valve with steel T-handle Forged brass body according to EN 12165, nickel platted, with teflon seals, two spindle O-Rings, female thread connection. Suitable for gas installations according to table DIN-DVGW G. 260. Medium temperature range -20 °C to 60 °C. Ball valve with steel lever Forged brass body according to EN 12165, nickel platted, with teflon seals, two spindle O-Rings, male x female thread connection. Suitable for gas installations according to table DIN-DVGW G. 260. Medium temperature range -20 °C to 60 °C. Ball valve with butterfly handle from steel Brass body according EN 12165, nickel, with double O-ring seal for spindle, ball with teflon seals, female thread x male thread. Suitable for gas installations to DIN-DVGW G 260 Nominal pressure PN 4, Operating temperature -20 °C to +60 °C. PN MOP DN 20 DN 25 DN 20 DN 25 DN 20 4 4 4 4 1 1 1 1 HERZ-Insulating Nipple for gas Insulating Nipple Brass body according EN 12165, female thread x male thread. Suitable for gas installations for DIN-DVGW G 260 Table nominal pressure PN 5, Operating temperature -20 °C to +60 °C. DN 25 5 1 HERZ-Strainer for gas Strainer for gas Brass body according EN 12165, both sides threaded sockets, Suitable for gas installations to DIN-DVGW G 260 table. Nominal pressure PN 5, Operating temperature -20 °C to 60 °C. DN 20 DN 25 108 5 1 Gas Product 2 group Pipe and Fittings Model EAN 90 04174 Order number Item 16 x 2.0 95000 1 G 1160 20 200 20 x 2.0 95010 0 G 1200 20 100 26 x 3.0 95020 9 G 1260 20 50 32 x 3.0 95030 8 G 1320 20 50 16 x 2.0 95040 7 G 1160 21 120 20 x 2.0 95050 6 G 1200 21 120 26 x 3.0 95060 5 G 1260 21 120 32 x 3.0 95070 4 G 1320 21 50 Dim. HERZ Plastic composite pipe for natural gas aluminium core, in reels 50 metres, with yellow extra strong surface RAL 1201. Operating temperature -20 °C to +60 °C, max. Operating pressure 100 mbar HERZ Plastic composite pipe for natural gas aluminium core, in 5 metre length, with yellow extra strong surface RAL 1201 Operating temperature -20 °C to +60 °C, max. Operating pressure 100 mbar Press fittings from brass for natural gas. Stainless steel press sleeve, double O-ring HNBR yellow color, plastic ring for centering the compression sleeve colored yellow, operating temperature -20 °C to +60 °C, max. operating pressure 100 mbar. Press straight coupling Reducer T- piece with equal outlets T- piece, centre outlet larger Product 3 group 16 x 2.0 95200 5 G 17016 00 200 20 x 2.0 95210 4 G 17020 00 150 26 x 3.0 95220 3 G 17026 00 100 32 x 3.0 95230 2 G 17032 00 50 20 x 2.0 16 x 2.0 95240 1 G 17020 01 150 26 x 3.0 16 x 2.0 95250 0 G 17026 01 100 26 x 3.0 20 x 2.0 95260 9 G 17026 02 100 32 x 3.0 16 x 2.0 95270 8 G 17032 02 60 32 x 3.0 20 x 2.0 95280 7 G 17032 06 60 16 x 2.0 95290 6 G 17216 00 60 20 x 2.0 95300 2 G 17220 00 50 26 x 3.0 95310 1 G 17226 00 30 32 x 3.0 95320 0 G 17232 00 25 95330 9 G 17216 03 50 95350 7 G 17220 01 50 95360 6 G 17226 03 30 95370 5 G 17226 05 30 95340 8 G 17226 17 30 95380 4 G 17232 04 30 95390 3 G 17232 07 30 16 x 2.0 20 x 2.0 16 x 2.0 20 x 2.0 16 x 2.0 20 x 2.0 26 x 3.0 16 x 2.0 26 x 3.0 26 x 3.0 20 x 2.0 26 x 3.0 26 x 3.0 32 x 3.0 26 x 3.0 32 x 3.0 20 x 2.0 32 x 3.0 32 x 3.0 26 x 2.0 32 x 3.0 109 Gas Product 3 group HERZ-Fittings for Gas Model T-Piece, centre outlet larger T-Piece with central female thread Junction, male thread Junction, female thread 90 degree angle Wall angle short 110 PN EAN 90 04174 Order number Item 0.1 95400 9 G 17220 03 50 0.1 95410 8 G 17226 13 30 0.1 95420 7 G 17232 09 30 0.1 95430 6 G 17232 14 30 16 x 2.0 1/2 16 x 2.0 0.1 95440 5 G 17216 41 60 20 x 2.0 1/2 20 x 2.0 0.1 95450 4 G 17220 41 50 26 x 3.0 1/2 26 x 3.0 0.1 95460 3 G 17226 41 30 32 x 3.0 1/2 32 x 3.0 0.1 95470 2 G 17232 43 30 16 x 2.0 - R 1/2 0.1 95480 1 G 17016 11 150 20 x 2.0 - R 1/2 0.1 95490 0 G 17020 11 150 20 x 2.0 - R 3/4 0.1 95500 6 G 17020 12 150 26 x 3.0 - R 3/4 0.1 95510 5 G 17026 12 100 32 x 3.0 -R1 0.1 95520 4 G 17032 13 70 16 x 2.0 Rp 1/2 0.1 95530 3 G 17016 21 150 20 x 2.0 Rp 1/2 0.1 95540 2 G 17020 21 150 20 x 2.0 Rp 3/4 0.1 95550 1 G 17020 22 100 26 x 3.0 Rp 3/4 0.1 95560 0 G 17026 22 100 26 x 3.0 - Rp 1 0.1 95570 9 G 17026 23 70 32 x 3.0 Rp 1¼ 0.1 95580 8 G 17032 24 30 16 x 2.0 0.1 95590 7 G 17116 00 150 20 x 2.0 0.1 95600 3 G 17120 00 80 26 x 3.0 0.1 95610 2 G 17126 00 50 32 x 3.0 0.1 95620 1 G 17132 00 30 16 x 2.0 - R 1/2 0.1 95630 0 G 17116 31 50 20 x 2.0 - R 1/2 0.1 95640 9 G 17120 31 50 20 x 2.0 - R 3/4 0.1 95650 8 G 17120 32 50 26 x 3.0 - R 3/4 0.1 95660 7 G 17126 32 50 Dim. 20 x 2.0 16 x 2.016 x 2.0 26 x 3.0 20 x 2.0 16 x 2.0 32 x 3.0 26 x 3.0 26 x 3.0 32 x 3.0 32 x 3.0 26 x 3.0 Strainers Product 1 group HERZ-Strainers, Mesh Width 0.5 mm Model Water Strainer Stainless steel mesh, Y-shape brass model for heating and cooling system, with female thread connection. Medium temperature range -10 °C to +110 °C (water 0 °C to +110 °C). kvs PN Dim. EAN 383 000282 Order number Item 2.55 16 15 7070 1 2662 01 25 5.60 16 20 7087 1 2662 02 25 8.20 16 25 7094 1 2662 03 16 kvs DN Dim. EAN 90 04174 Order number Item 15.9 32 1¼ 40040 7 1 4111 04 5 29.6 40 1½ 40050 6 1 4111 05 5 40.4 50 2 40060 5 1 4111 06 5 55.0 65 2½ 40070 4 1 4111 07 1 87.4 80 3 40080 3 1 4111 08 1 21.5 32 1¼ 41480 0 1 4111 14 5 30.0 40 1½ 41490 9 1 4111 15 5 42.0 50 2 41500 5 1 4111 16 5 64.3 65 2½ 41510 4 1 4111 17 1 148.6 80 3 41520 3 1 4111 18 1 3.1 15 1/2 39020 3 1 4111 51 10 7.1 20 3/4 39030 2 1 4111 52 5 13.8 25 1 39040 1 1 4111 53 5 21.5 32 1¼ 39050 0 1 4111 54 5 30.0 40 1½ 39060 9 1 4111 55 1 42.0 50 2 39070 8 1 4111 56 1 3.1 15 1/2 39000 5 1 4111 41 10 7.1 20 3/4 39010 4 1 4111 42 10 HERZ-Strainers, Mesh Width 0.4 mm Model HERZ-Strainer with fine-mesh screen made of chromenickel steel, mesh width 0.4 mm Dezincification resistant brass body, socket x socket. HERZ-Strainers, Mesh Width 0.75 mm HERZ-Strainer with fine-mesh screen made of chromenickel steel, mesh width 0.75 mm Dezincification resistant brass body, socket x socket. HERZ-Strainer with male thread, with fine-mesh screen made of chrome-nickel steel, mesh width 0.75 mm. Brass version, 2 x male thread, flat seal. Strainer with Drain Valve HERZ-strainer with drain valve (2275 09) fine-mesh Stainless Steel screen, Mesh size 0.75 mm. socket x socket. Compression adapter: DN 15: Universal model with special sockets for threaded pipe and Compression adapter. DN 20: Adapter 1 6266 20 Compression union G 3 / 4. Adapter and compression sets are sold separately. 111 Accessories Product 1 group HERZ-Metering stations Model HERZ-Metering Station with two test points Inlet female thread, outlet external thread, PN 20 from -20 °C up to 110 °C Dezincification resistant brass body, for hydraulic balance of cooling systems, fan coils and heating systems. 2 test points (0284) are mounted. HERZ-Metering Station Low Flow Version With reduced kvs-value, for differential pressure measurement, otherwise as described above. HERZ-Metering Station Medium Flow Version for differential pressure measurement. DN kvs EAN 90 04174 Order number Item 15 2.2 43500 3 1 4000 01 10 20 4.25 43520 1 1 4000 02 10 25 8.6 43530 9 1 4000 03 10 32 15.9 43540 9 1 4000 04 5 40 23.7 43550 8 1 4000 05 5 50 48.0 43560 7 1 4000 06 5 15 0.55 43510 2 1 4000 11 10 15 1.1 43310 8 1 4000 21 10 HERZ-Measuring Valves Test points for HERZ-STRÖMAX-Circuit regulating valves (manufactured from 2004), brass version, blue cap (return) for flow computer. 1/4 02360 6 1 0284 01 1 Test points for HERZ-STRÖMAX-Circuit regulating valves (manufactured in 2004 or later), brass version, red cap (flow) for flow computer. 1/4 02370 5 1 0284 02 1 Test points for HERZ-STRÖMAX-TW-Circuit regulating valves Brass version, blue cap (return) for flow computer, valves are marked in green (for drinking water). 1/4 02460 6 2 0284 01 1 Test points for HERZ-STRÖMAX-TW-Circuit regulating valves Brass version, red cap (flow) for flow computer, valves are marked in green (for drinking water). 1/4 02470 5 2 0284 02 1 Test points for HERZ-STRÖMAX-Circuit regulating valves Brass version, blue cap (return) for flow computer. Extended model for insulated valves. 1/4 02530 3 1 0284 11 1 Test points for HERZ-STRÖMAX-Circuit regulating valves. Brass version, red cap (flow) for flow computer. Extended model for insulated valves. 1/4 02540 2 1 0284 12 1 Test points with draining function Brass version, green cap, with swivel hose connection. Test point for flow computer. 1/4 02640 9 2 0284 20 1 Test points with draining function Brass version, red cap, with swivel hose connection. Test point for flow computer. 1/4 02560 0 1 0284 22 1 Test points with draining function Brass version, blue cap, with swivel hose connection. Test point for flow computer. 1/4 02550 1 1 0284 21 1 1/4 02620 1 1 0284 23 20 1/4 02630 0 1 0284 24 20 Extended test point, drain function, blue cap Extended test point, drain function, red cap 112 Accessories Product 1 group HERZ-Measuring Computer Model HERZ Measuring computer suitable for one-hand operation Electronic device to measure differential pressure, including pressure absorption device, for measurement of circuit regulating valves with direct flow display and differential pressure display. Measuring range: 0–10 bar, maximum pressure 15 bar. Connection for printer and computer for RS232C interface, protection IP 40, recording buffer for 2,500 measurements. Package includes accessories: 2 measuring hoses with R20 quick acting closure, filter hose adapter, software and operation manual on disk, pressure absorption device 1 0284 00 and test point adapter set 1 8903 11. EAN 90 04174 Order number Item 82110 3 1 8900 03 1 02380 4 1 0284 00 1 81610 9 1 8903 11 1 02610 2 1 0284 10 Set HERZ-Accessories for measuring computer Test point adaptors HERZ-Test point adapter set for HERZ-STRÖMAX-Valves with test points 0280, 0282 u. 0283, for differential pressure measurement via HERZ-Measuring computers “manufactured in 2004 or earlier”. Extension lead for measuring valve 1 set = 2 pieces 113 Accessories Product 1 group HERZ-Accessories Model EAN 90 04174 Order number Item 1/4 02180 0 1 0273 09 1 3/8 02190 9 1 0273 00 1 3/8 02650 8 2 0275 00 20 1/4 02660 7 2 0275 09 20 3/8 02480 1 2 0276 00 20 1/4 02490 0 2 0276 09 20 1/4 02220 3 1 0276 09 1 3/8 02230 2 1 0276 00 1 1/2 00010 2 1 0256 01 1 3/8 60010 4 1 6206 00 1 1/2 60020 3 1 6206 01 1 3/4 60030 2 1 6206 02 1 DN Screw plug Brass version, with O-Ring seal and hexagon socket screw. Drain cock Drain cock with Handle, brass version, TW. Drain Valve with handle and swivel hose connection Brass version, Hose connection 1 6206 01 have to be ordered separately. Drain Valve with handle and swivel hose connection Brass version, Hose connection 1 6206 01 have to be ordered separately. Hose Connection Adapter for HERZ-RL-5 and HERZ-3000 For radiator filling and draining via the return valve. Hose connection 1 6206 01 to be ordered separately. Hose connection Brass version, nut and hose sleeve. Thermal insulation shell for STRÖMAX Stutoff Valves For STRÖMAX-D HERZ-accessories, pipe fittings, drain valves Valves for STRÖMAX-R Circuit Regulating Valves For STRÖMAX-M Circuit Regulating Valves with test points The holes for the test points can be cut out with a knife. For HERZ-Strainers DN 32-85 Dim. 15 1/2 40110 7 1 4095 01 1 20 3/4 40120 6 1 4095 02 1 25 1 40130 5 1 4095 03 1 32 1¼ 40140 4 1 4095 04 1 40 1½ 40150 3 1 4095 05 1 50 2 40160 2 1 4095 06 1 65 2½ 40170 1 1 4095 07 1 80 3 40180 0 1 4095 08 1 62910 5 1 6517 04 20 62920 4 1 6517 05 20 02670 6 1 4006 02 1 Presetting seal for STRÖMAX-GM/GR and STRÖMAX GMF for covering the hand wheel fastening screw, this seal will be destroyed by removing. Presetting marker Plastic tag for marking the presetting step. Can be mounted on the valve or pipe. Key presettingfor HERZ-flow rate controller model 4001, since 2009; HERZ-Differential pressure controller 4002, since 2009; HERZ-Kombi-flow controller, model 4006. 114 Spare parts for inclined model HERZ-Upper Part for inclined valve seit 2004 Year EAN 90 04174 Order number Item 64300 2 1 6385 50 1 3/4 64310 1 1 6385 52 1 25 1 64320 0 1 6385 53 1 32 1¼ 64330 9 1 6385 54 1 40 1½ 64340 8 1 6385 55 1 50 2 64350 7 1 6385 56 1 65 2½ 64360 6 1 6385 57 1 80 2 64370 5 1 6385 58 1 Upper part for STRÖMAX shut-off valves Non-rising spindle 15 1/2 62370 7 1 6389 01 1 20 3/4 62380 6 1 6389 02 1 4125 D, 4125 AD 4325 D, 4325 AD 25 1 62390 5 1 6389 03 1 32 1¼ 62400 1 1 6389 04 1 40 1½ 62410 0 1 6389 05 1 50 2 62420 9 1 6389 06 1 65 2½ 62560 2 1 6389 07 1 80 3 62570 1 1 6389 08 1 3/8–1/2 61700 3 1 6519 00 1 3/4 61710 2 1 6519 02 1 1 61720 1 1 6519 03 1 1¼-1½ 61730 0 1 6519 04 1 2 61740 9 1 6519 06 1 2½–3 61750 8 1 6519 07 1 - 1/2–3 62280 9 1 6517 00 1 15 1/2 61350 0 1 6382 01 1 20 3/4 61360 9 1 6382 02 1 25 1 61370 8 1 6382 03 1 32 1¼ 61380 7 1 6382 04 1 40 1½ 61390 6 1 6382 05 1 50 2 61400 2 1 6382 06 1 65 2½ 61410 1 1 6382 07 1 80 3 61420 0 1 6382 08 1 Model Upper part for STRÖMAX shut-off valves with O-ring seal between cap and body. Rising spindle 4115, 4115 A DN Dim. 10 3/8 15 1/2 20 Handwheel with fixing screw for Gate valve and STRÖMAX-stuffing box type. - Handwheel with fixing screw for STRÖMAX-D, STRÖMAX-G. Upper part for gate valve Upper part for Gate valve with 2 blank plugs. 4112, 4112 A 115 Spare parts for inclined model Product 1 group Upper Part for inclined model TW DN Dim. EAN 90 04174 Order number Item Upper Part for STRÖMAX-MW and STRÖMAX-RW Balansing valves, New Design, with O-ring seal between cap and body. 15 1/2 66030 6 2 6388 00 10 20 3/4 66040 5 2 6388 02 10 4117 MW, 4117 RW 25 1 66050 4 2 6388 03 10 32 1¼ 66060 3 2 6388 04 5 40 1½ 66070 2 2 6388 05 1 50 2 66080 1 2 6388 06 1 Upper Part for STRÖMAX-M and STRÖMAX-R Double regulating valves, New Design, with O-ring seal between cap and body. 15 1/2 64380 4 1 6388 50 1 20 3/4 64390 3 1 6388 52 1 4117 M, 4117 R 25 1 64400 9 1 6388 53 1 32 1¼ 64410 8 1 6388 54 1 40 1½ 64430 6 1 6388 55 1 50 2 64420 7 1 6388 56 1 65 2½ 64440 5 1 6388 57 1 80 3 64450 4 1 6388 58 1 1/2–2 65810 5 2 6518 00 1 1/2–3 61690 7 1 6518 00 1 Model Upper Part for inclined model, current version Handwheels Handwheel green with fixing screw for STRÖMAX MW Double regulating Valves incline model with female thread. 2 4117 MW, 2 4117 RW Handwheel green with fixing screw for STRÖMAX-M, STRÖMAX-R. 116 Spare parts for inclind Model Product 1 group HERZ-Upper Part for incline Model, New Design Model DN EAN 90 04174 Order number Item 64460 3 2 6385 00 1 Upper Part for STRÖMAX-AW shutoff valve, inclined model, risind spindel 10 2 4115 AW, 2 4315 AW 20 64480 1 2 6385 02 1 25 64490 0 2 6385 03 1 32 64505 1 2 6385 04 1 40 64510 5 2 6385 05 1 50 64520 4 2 6385 06 1 65 64530 3 2 6385 07 1 80 64540 2 2 6385 08 1 15 64550 1 2 6389 01 1 20 64560 0 2 6389 02 1 25 64570 9 2 6389 03 1 32 64580 8 2 6389 04 1 40 64590 7 2 6389 05 1 50 64600 3 2 6389 06 1 65 64610 2 2 6389 07 1 80 64620 1 2 6389 08 1 1/2 66530 1 2 6387 51 1 3/4 66540 0 2 6387 52 1 1 66550 9 2 6387 53 1 1¼ 66560 8 2 6387 54 1 1½ 66570 7 2 6387 55 1 2 66580 6 2 6387 56 1 64630 0 2 6519 00 1 Upper Part for STRÖMAX-WD- shutoff valve 4125 WD, 4125 AWD 4325 D, 4325 AD Upper Part for valves 4215 W, 4215 AW, straight type 2 4215 W, 2 4215 AW 15 Handwheel green with fixing screw for STRÖMAX MW shutoff valve, incline model 10 2 4115 AW, 2 4315 AW 20 64640 9 2 6519 02 1 25 64650 8 2 6519 03 1 64660 7 2 6519 04 1 65 64680 5 2 6519 06 1 80 64680 5 2 6519 07 1 15 bis 80 64690 4 2 6517 00 1 15-20 66430 4 2 6520 01 1 25-32 66440 3 2 6520 03 1 40-50 66450 2 2 6520 04 1 15 32 40 Handwheel green with fixing screw for STRÖMAX-AWD- shutoff valve, incline model 2 4125 AWD, 2 4325 AWD Handwheel green with fixing screw for valves 3215 W, 4215 AW, strait model 2 4215 W, 2 4215 AW 117 Spare parts for pipe fittings Product 1 group Upper Part for incline Model till 2004 year Model Upper part for STRÖMAX M and STRÖMAX R Double Regulating Valves with klingerit seal between cap and body. 4117 M, 4117 R Upper part for STRÖMAX shutoff valves with klingerit seal between cap and body. 4115, 4115 A DN Dim. EAN 90 04174 Order number Item 15 1/2 65250 9 1 6388 00 1 20 3/4 65240 0 1 6388 02 1 25 1 65260 8 1 6388 03 1 32 1¼ 65270 7 1 6388 04 1 40 1½ 65280 6 1 6388 05 1 50 2 65290 5 1 6388 06 1 65 2½ 65300 1 1 6388 07 1 80 3 65310 0 1 6388 08 1 10 3/8 61430 9 1 6385 00 1 15 1/2 20 3/4 61440 8 1 6385 02 1 25 1 61450 7 1 6385 03 1 32 1¼ 61460 6 1 6385 04 1 40 1½ 65320 9 1 6385 05 1 50 2 65330 8 1 6385 06 1 65 2½ 65340 7 1 6385 07 1 80 3 65350 6 1 6385 08 1 1/4 00080 5 1 0280 09 1 1/4 00100 0 1 0282 09 1 M 14 x 1.5 00140 6 1 0283 09 1 1/4 00030 0 1 0270 09 1 3/8 00020 1 1 0270 00 1 1/4 00050 8 1 0272 09 1 3/8 00040 9 1 0272 00 1 1/4 00070 6 1 0275 09 1 3/8 00060 7 1 0275 00 1 HERZ-Measuring Valves till 2004 year Measuring valve for STRÖMAX-M, STRÖMAX-MF straight and STRÖMAX-MFS straight, Brass version. Measuring valve for STRÖMAX-M, Angle, Brass version. Measuring valve for STRÖMAX-GM, strait, Brass version. HERZ-Drain fittings till 2004 year for pipe fittings and old versions of incline model. Drainkock with handle Brass version, with Klingerit seal. Screw plug Brass version, with Klingerit seal. Drainkock with handle and hose connection Brass version, with Klingerit seal. Hose connection 1 6206 01 have to be orderer separatel 118 Spare parts for Differential pressure Product 1 group HERZ-Upper Part for Differential pressure Controllers 4007 EAN 90 04174 Order number Item 65550 0 1 6386 02 1 1 65560 9 1 6386 03 1 32 1¼ 65570 8 1 6386 04 1 40 1½ 65580 7 1 6386 05 1 50 2 65550 6 1 6386 06 1 1/8 40250 0 1 4007 78 1 Capillary for Differential pressure Controllers 4007 including screw plug G 1/4 and nipples. 1.0 m 43270 5 1 4007 79 1 1.5 m 43271 2 1 4007 80 1 Capillary for 4002 with ball valve 1/8 1.0 m 40240 1 1 4002 78 1 Capillary for 4002 1.0 m 40230 2 1 4002 79 1 62820 7 1 6387 12 1 Model Upper Part for Differential pressure Controllers 4007 and 4207 R. DN Dim. 15 1/2 20 3/4 25 Capillary for Differential pressure Controllers 4007 Ball valve with nipple 1/8 Upper Parts for straight Model Upper Part for STRÖMAX-GM- and STRÖMAX-GR-double regulating valves 15 1/2 20 3/4 4217 GM, 4217 GR, 4218 GMF 25 1 62830 6 1 6387 13 1 32 1¼ 62840 5 1 6387 14 1 40 1½ 62850 4 1 6387 15 1 50 2 62860 3 1 6387 16 1 65 2½ 62870 2 1 6387 17 1 80 3 62880 1 1 6387 18 1 Upper Part for STRÖMAX-G shutoff valve 15 1/2 62930 3 1 6387 52 10 20 3/4 4215 G, 4215 AG, 4218 AGF 25 1 62940 2 1 6387 53 10 32 1¼ 62950 1 1 6387 54 5 40 1½ 62960 0 1 6387 55 2 50 2 62970 9 1 6387 56 1 65 2½ 62980 8 1 6387 57 1 80 3 62990 7 1 6387 58 1 1/2–1½ 62890 0 1 6517 06 1 2–3 62900 6 1 6517 08 1 Handwheel Handwheel with fixing screw for STRÖMAX-GM, STRÖMAX-GR and STRÖMAX-GMF. 119 Plastic Skirting Boards Product 4 group Plastic Skirting Boards Model HERZ-Plastic skirting board, 4000 x 40 x 88 mm, plastic skirting board, re-cycled PVC hollow profile laminated with light-fast foil. Sealing lip extruded in colour of skirting board, click-clack fixing on ledge handles. HERZ-Plastic skirting board PVC hollow profile, white. Sealing lip extruded in white, click-clack fixing on ledge handles. Colour EAN 90 04174 Order number Item Light oak 00270 0 3 S910 14 40 Ash, white 00280 9 3 S910 34 40 Beech 00290 8 3 S970 44 40 Birch 00300 4 3 S970 54 40 pure white 02250 0 3 S970 64 40 white 00410 0 3 S912 00 50 black 00430 8 3 S940 00 50 Pipe and Skirting Board Handles HERZ-Pipe handle, up to pipe diameter 22 mm For mounting of HERZ-Skirting boards on already placed pipes, height adjustment is not possible. Fixing by dowel 3 S130 60 6 x 60 mm, consumption 1 piece/m skirting board. HERZ-Pipe handle, fix up to pipe diameter 22 mm For mounting of HERZ-Skirting boards on already placed pipes, height adjustment up to 15 mm. Fixing by dowel 3 S130 60 6 x 60 mm, consumption 1 piece/m skirting board. 120 Plastic Skirting Board System Product 4 group Plastic Skirting Board System Connection Pieces Model HERZ-Butt joints Recycled PVC, surface design engraved, to cover butt joints. HERZ-External angle Recycled PVC, surface design engraved, to cover mitre-cuts. HERZ-Internal angle Recycled PVC, surface design engraved, to cover mitre-cuts. HERZ-External angle, plug-in type Recycled PVC, surface design engraved, no mitre-cuts necessary. HERZ-Internal angle, plug-in type Recycled PVC, surface design engraved, no mitre-cuts necessary. HERZ-Finishing cover, right Recycled PVC, surface design engraved, to cover open skirting board ends. HERZ-Finishing cover, left Recycled PVC, surface design engraved, to cover open skirting board ends. Colour EAN 90 04174 Order number Item Light oak 00450 6 3 S912 10 50 Ash, white 00460 5 3 S912 30 50 Beech 00470 4 3 S918 30 50 Birch 00480 3 3 S919 30 50 Pure white 02260 9 3 S919 31 50 Light oak 02090 2 3 S912 50 50 Ash, white 02100 8 3 S912 70 50 Beech 02110 7 3 S918 40 50 Birch 02120 6 3 S919 40 50 Light oak 02130 5 3 S912 90 50 Ash, white 02140 4 3 S913 10 50 Beech 02150 3 3 S918 50 50 Birch 02160 2 3 S919 50 50 Light oakl 00490 2 3 S958 10 50 Ash, white 00500 8 3 S958 30 50 Beech 00510 7 3 S918 80 50 Birch 00520 6 3 S919 80 50 Pure white 02270 8 3 S919 81 50 Light oak 00530 5 3 S958 50 50 Ash, white 00540 4 3 S958 70 50 Beech 00550 3 3 S918 90 50 Birch 00560 2 3 S919 90 50 Pure white 02280 7 3 S919 91 50 Light oak 00570 1 3 S913 30 50 Ash, white 00580 0 3 S913 50 50 Beech 00590 9 3 S918 60 50 Birch 00600 5 3 S919 60 50 Pure white 02290 6 3 S919 61 50 Light oak 00610 4 3 S913 70 50 Ash, white 00620 3 3 S913 90 50 Beech 00630 2 3 S918 70 50 Birch 00640 1 3 S919 70 50 Pure white 00230 2 3 S919 71 50 121 Sanitary Product 1 group HERZ-Compact Distributors for Sanitary Installation DN 20 (3/4) Dim. EAN 90 04174 Order number Item With 2 outlets 82160 8 2 8451 22 1 With 3 outlets 82170 7 2 8451 23 1 With 4 outlets 82180 6 2 8451 24 1 HERZ-Compact distributor made of dezincification resistant brass, according to DVGW-AB W 534. Outside only is nickel-plated. Stem DN 20, outlets, external thread G 3/4 with cone, 50 mm pipe centres. With 2 outlets 82190 5 2 8451 32 1 HERZ-Compact distributor made of dezincification resistant brass, according to DVGW-AB W 534. Outside only is nickel-plated. Stem DN 20, outlets, external thread G 3/4 with cone, 50 mm pipe centres. With 4outlets 84490 4 2 8451 42 1 81410 5 1 8422 20 1 Model HERZ-Compact distributor made of dezincification resistant brass according DVGW-AB W 534. Outside only is nickelplated. Stem DN 20, outlets, external thread G 1/2 with cone, 50 mm pipe centres. Spare Parts Distributor holding device for distributor installation into cabinet. 1 Pair for compact distributors 1 8441, beam distance 200 mm. Produktgruppe 3 Wall-Angles with female thread G 1/2 x Rp 1/2 16670 9 P 3124 14 150 G 3/4 x Rp 1/2 16680 8 P 3126 14 120 G 3/4 x Rp 3/4 16690 7 P 3126 15 100 G 3/4 - Rp 1/2 16700 3 P 3128 18 15 G 3/4 x G 3/4 - Rp 1/2 16710 2 P 3128 19 12 Mounting strip for wall box 16880 2 P 1025 07 10 Wall Box 122 Press fittings Product 1 3 group Wall-Angles with female thread EAN 90 04174 Order number Item 14 x 2 - Rp 1/2 10180 9 P 7114 31 50 16 x 2 - Rp 1/2 10190 8 P 7116 31 50 18 x 2 - Rp 1/2 10200 4 P 7118 31 50 20 x 2 - Rp 1/2 10210 3 P 7120 31 50 20 x 2 - Rp 3/4 10220 2 P 7120 32 50 26 x 3 - Rp 3/4 10270 7 P 7126 32 50 14 x 2 - Rp 1/2 10390 72 P 7114 41 10 16 x 2 - Rp 1/2 10400 8 P 7116 41 10 18 x 2 - Rp 1/2 10410 7 P 7118 41 10 20 x 2 - Rp 1/2 10420 6 P 7120 41 10 16 x 2 - Rp 1/2 153/120/100 Set: Rail + 2 wall angle 10650 7 P 7116 56 10 16 x 2 - Rp 1/2 76 Set: Rail + 2 wall angle 10660 6 P 7116 57 10 16 x 2 - Rp 1/2, 2 Holes Rail + 2 wall angle 10670 5 P 7116 58 10 16 x 2 - Rp 1/2, 3 Holes Rail + 2 wall angle 10680 4 P 7116 59 10 Model Wall-Angle long Wall-Angle set 123 Press Fittings Product 3 group Concealed T-piece for Flush Box EAN 90 04174 Order number Item 16 x 2 - Rp 1/2 - 16 x 2 11180 8 P 7216 61 50 20 x 2 - Rp 1/2 - 20 x 2 11190 7 P 7220 61 50 14 x 2 - Rp 1/2 11130 3 P 7114 61 50 16 x 2 - Rp 1/2 11140 2 P 7116 61 50 18 x 2 - Rp 1/2 11150 1 P 7118 61 50 20 x 2 - Rp 1/2 11160 0 P 7120 61 50 16 x 2 - Rp 1/2 4 mm 11070 2 P 7116 51 10 16 x 2 - Rp 1/2 30 mm 11030 6 P 7116 52 30 18 x 2 - Rp 1/2 30 mm 11040 5 P 7118 52 30 20 x 2 - Rp 1/2 30 mm 11050 4 P 7120 52 30 16 x 2 - Rp 1/2 thickness up to 30 10990 4 P 7116 53 10 18 x 2 - Rp 1/2 thickness up to 30 11000 9 P 7118 53 10 20 x 2 - Rp 1/2 thickness up to 30 11010 8 P 7120 53 10 16 x 2 - Rp 1/2 - 16 x 2 10350 6 P 7116 38 10 20 x 2 - Rp 1/2 - 20 x 2 10360 5 P 7120 38 10 16 x 2 - Rp 1/2 - 16 x 2 10300 1 P 7116 35 10 18 x 2 - Rp 1/2 - 18 x 2 10310 0 P 7118 35 10 20 x 2 - Rp 1/2 - 20 x 2 10320 9 P 7120 35 10 Model Wall Bushing Wall-Angle double, U-shape 124 Mounting Kits Product 3 group HERZ-Press fittings Mounting Kits EAN 90 04174 Order number Item Mounting strip for wall bushing 11080 1 P 7298 11 6 Mounting strip for wall-angle with adapter 10450 3 P 7298 10 6 16 x 2 - Rp 1/2 30 mm 11090 0 P 7116 54 6 18 x 2 - Rp 1/2 30 mm 11100 6 P 7118 54 6 20 x 2 - Rp 1/2 30 mm 11110 5 P 7120 54 6 16 x 2 - Rp 1/2 - 16 x 2 10560 9 P 7116 39 6 18 x 2 - Rp 1/2 - 18 x 2 10570 8 P 7118 39 6 20 x 2 - Rp 1/2 - 20 x 2 10580 7 P 7120 39 6 16 x 2 - Rp 1/2 10470 1 P 7116 33 6 18 x 2 - Rp 1/2 10480 0 P 7118 33 6 20 x 2 - Rp 1/2 10490 9 P 7120 33 6 16 x 2 - Rp 1/2 10610 1 P 7116 43 6 18 x 2 - Rp 1/2 10620 0 P 7118 43 6 20 x 2 - Rp 1/2 10630 9 P 7120 43 6 Model Dim. Mounting strip with adapter and 2 wall bushings, not mounted, 3/4 external thread 30 mm Mounting strip with adapter and 2 wall-angles, double U-shape not mounted, 1/2 Mounting strip with adapter and 2 short wall-angles, not mounted Included in set Mounting strip with adapter and 2 long wall-angles, not mounted Included in set. 125 Distributors Product 1 group HERZ-Nickel-plated Compact Distributor Distributor Outlet G 3/4 Dim. EAN 90 04174 Order number Item With 3 Outlet 80830 1 1 8541 03 1 With 4 Outlet 80840 0 1 8541 04 1 With 5 Outlet 80850 9 1 8541 05 1 With 6 Outlet 80860 8 1 8541 06 1 With 7 Outlet 80870 7 1 8541 07 1 With 8 Outlet 80880 6 1 8541 08 1 With 9 Outlet 80890 5 1 8541 09 1 With 10 Outlet 80900 1 1 8541 10 1 With 11 Outlet 80910 0 1 8541 11 1 With 12 Outlet 81920 9 1 8541 12 1 Shutoff Valve, straight model, 1 pair, for compact distributor, nickel-plated. Pipe connection for compression adapter G 1, distributor connection with freely moving nut. 25 82060 1 1 8537 43 1 Shutoff Valve, straight model, 1 pair, for compact distributor, nickel-plated. Pipe connection with socket, distributor connection with freely moving nut. 25 82040 3 1 8537 53 1 Shutoff Valve, angle model, 1 pair, for compact distributor, nickel-plated. Pipe connection for compression adapter G 1, distributor connection with freely moving nut, screw connection, short and long version. 25 82070 0 1 8538 43 1 Shutoff Valve, angle model, 1 pair, for compact distributor, nickel-plated. Pipe connection with socket, Distributor connection with freely moving nut, screw connection, short and long version. 25 82050 2 1 8538 53 1 81400 6 1 8522 20 1 Model HERZ-Compact distributor pair, dimension 1, consisting of distributor pair, holding device, 1 bleed valve and O-Ring seal between the components, distributor entry with euro cone, external thread G 1 for copper and thin-walled steel pipes with HERZ-Compression adapter 6273 for plastic pipes with HERZ-plastic pipe connections 6198, compression adapter and copper pipe connections have to be ordered separately. When using HERZ-compression adapters pay attention to their operational data. Maximum operating temperature 110 °C, maximum operating pressure 10 bar. HERZ-Shutoff Valve for Compact distributor pair 8541 Spare parts Distributor holding device for installation of distributor in cabinet, 1 pair for compact distributor 1 8541. Beam distance 200 mm. Product 6 group HERZ-Ball Valve Model Ball Valve with freely moving nut, with lever Body made of forget brass to DIN 17660, plated. Seals PTFE and NBR. Operating temperature range: -10 °C to 110 °C, (water at 0 °C to 110 °C), non-aggressive for all media such as water, oil, air, fuel oil or lubricating Ball Valve with freely moving nut, with T- handle Ball Valve with freely moving nut, with lever. Body made of forget brass to DIN 17660, plated. Seals PTFE and NBR. Operating temperature range: -10 °C to 110 °C, (water at 0 °C to 110 °C), non-aggressive for all media such as water, oil, air, fuel oil or lubricating 126 PN Dim. EAN 383 000282 Order number Item 16 15 7773 1 2442 01 50 16 20 7780 1 2442 02 50 16 15 7797 1 2442 11 50 16 20 7803 1 2442 12 50 Distribution Product 1 group Pre-assembled Control station for radiator heating control Model Pre-assembled Control station for radiator heating control, circuits consisting of: - Compact distributor pairof forged brass, plated, with bleed Valve and 2 end caps - Distributor holding device - Ball Valves brass version with full bore - Adapter and connecting places pre-assembled in distributor cabinet made of galvanized steel sheet, front frame and door powder coated, white (RAL 9010). Adjustable installation depth (80–110 mm), cabinet height 705–775 mm, with removable pipe rail tracks. Radiator connection is not temperature controlled. Pre-assembled Control station, for floor heating control circuits consisting of: - Rod distributor made of brass, flow distributor with control inserts with flow rate display and return distributor with thermostatic valves, bleed, drain valve with hose connection and 2 end caps. - Distributor holding device - Ball Valves brass version with full bore - Adapter and connecting places pre-assembled in distributor cabinet made of galvanized steel sheet, front frame and door powder coated, white (RAL 9010). Adjustable installation depth (80–110 mm), cabinet height 705–775 mm, with removable pipe rail tracks. Radiator connection is not temperature controlled. Pre-assembled Control station, for floor heating control and radiator heating control, circuits consisting of: consisting of a combination of Pre-assembled Control station for radiators for 8574 and a distribution point for floor heating control 8575, including accessories as described. Dim. EAN 90 04174 Order number Item 3-outlets 99725 9 1 8574 03 1 4-outlets 99726 6 1 8574 04 1 5-outlets 99727 3 1 8574 05 1 6-outlets 99728 0 1 8574 06 1 7-outlets 99729 7 1 8574 07 1 8-outlets 99730 3 1 8574 08 1 9-outlets 99731 0 1 8574 09 1 10-outlets 99732 7 1 8574 10 1 11-outlets 99733 4 1 8574 11 1 12-outlets 99734 1 1 8574 12 1 3-outlets 99735 8 1 8575 03 1 4-outlets 99736 5 1 8575 04 1 5-outlets 99737 2 1 8575 05 1 6-outlets 99738 9 1 8575 06 1 7-outlets 99739 6 1 8575 07 1 8-outlets 99740 2 1 8575 08 1 9-outlets 99741 9 1 8575 09 1 10-outlets 99742 6 1 8575 10 1 11-outlets 99743 3 1 8575 11 1 12-outlets 99744 0 1 8575 12 1 3-outlets 99745 7 1 8576 03 1 4-outlets 99746 4 1 8576 04 1 5-outlets 99747 1 1 8576 05 1 6-outlets 99748 8 1 8576 06 1 7-outlets 99749 5 1 8576 07 1 3-outlets 47000 4 3 F531 03 1 4-outlets 47001 1 3 F531 04 1 5-outlets 47002 8 3 F531 05 1 6-outlets 47003 5 3 F531 06 1 7-outlets 47004 2 3 F531 07 1 8-outlets 47005 9 3 F531 08 1 9-outlets 47006 6 3 F531 09 1 10-outlets 47007 3 3 F531 10 1 11-outlets 47008 0 3 F531 11 1 12-outlets 47009 7 3 F531 12 1 HERZ-COMPACT FLOOR Pre-assembled Control station for floor heating control, connection on the right, circuits consisting of: - Rod distributor made of brass, flow distributor with control inserts with flow rate display and return distributor with thermostatic valves, bleed and drain valve with hose connection. - Distributor holding devices - Actuating drive for heating circuit control - Mechanical temperature control - Shutoff valve - Circulating pump - Automatic excess temperature control through disconnection of pump - Differential pressure control with overflow valve, preassembled in distributor cabinet made of galvanized steel sheet, front frame and door powder coated, white (RAL 9010). Adjustable installation depth (80–110 mm), cabinet height 705–775 mm, with removable pipe rail tracks. Radiator connection is not temperature controlled. 127 Distribution Product 1 group HERZ-COMPACT FLOOR Model Pre-assembled Control station for floor heating control, connection on the left, circuits consisting of: - Rod distributor made of brass, flow distributor with control inserts with flow rate display and return distributor with thermostatic valves, bleed and drain valve with hose connection. - Distributor holding devices - Mechanical temperature control - Shutoff valve - Circulating pump - Automatic excess temperature control through disconnection of pump - Differential pressure control with overflow valve, pre-assembled in distributor cabinet made of galvanized steel sheet, front frame and door powder coated, white (RAL 9010). Adjustable installation depth (80–110 mm), cabinet height 705–775 mm, with removable pipe rail tracks. Pre-assembled Control station, 230 V, 50 Hz for floor heating control and additional 2 radiator, connection on the right, circuits consisting of: - Rod distributor made of brass, flow distributor with control inserts with flow rate display and return distributor with thermostatic valves, bleed and drain valve with hose connection. - Distributor holding devices - Mechanical temperature control - Shutoff valve - Circulating pump - Automatic excess temperature control through disconnection of pump - Differential pressure control with overflow valve, preassembled in distributor cabinet made of galvanized steel sheet, front frame and door powder coated, white (RAL 9010). Adjustable installation depth (80–110 mm), cabinet height 705–775 mm, with removable pipe rail tracks. Radiator connection is not temperature controlled. Pre-assembled Control station, 230 V, 50 Hz for floor heating control and additional 2 radiator, connection on the left, circuits consisting of: - Rod distributor made of brass, flow distributor with control inserts with flow rate display and return distributor with thermostatic valves, bleed and drain valve with hose connection. - Distributor holding devices - Mechanical temperature control - Shutoff valve - Circulating pump - Automatic excess temperature control through disconnection of pump - Differential pressure control with overflow valve, preassembled in distributor cabinet made of galvanized steel sheet, front frame and door powder coated, white (RAL 9010). Adjustable installation depth (80–110 mm), cabinet height 705–775 mm, with removable pipe rail tracks. Radiator connection is not temperature controlled. 128 Dim. EAN 90 04174 Order number Item 3-outlets 47010 3 3 F531 13 1 4-outlets 47011 0 3 F531 14 1 5-outlets 47012 7 3 F531 15 1 6-outlets 47013 4 3 F531 16 1 7-outlets 47014 1 3 F531 17 1 8-outlets 47015 8 3 F531 18 1 9-outlets 47016 5 3 F531 19 1 10-outlets 47017 2 3 F531 20 1 11-outlets 47018 9 3 F531 21 1 12-outlets 47019 6 3 F531 22 1 3-outlets 47020 2 3 F531 23 1 4-outlets 47021 9 3 F531 24 1 5-outlets 47022 6 3 F531 25 1 6-outlets 47023 3 3 F531 26 1 7-outlets 47024 0 3 F531 27 1 8-outlets 47025 7 3 F531 28 1 9-outlets 47026 4 3 F531 29 1 10-outlets 47027 1 3 F531 30 1 11-outlets 47028 8 3 F531 31 1 12-outlets 47029 5 3 F531 32 1 3-outlets 47030 1 3 F531 33 1 4-outlets 47031 8 3 F531 34 1 5-outlets 47032 5 3 F531 35 1 6-outlets 47033 2 3 F531 36 1 7-outlets 47034 9 3 F531 37 1 8-outlets 47035 6 3 F531 38 1 9-outlets 47036 3 3 F531 39 1 10-outlets 47037 0 3 F531 40 1 11-outlets 47038 7 3 F531 41 1 12-outlets 47039 4 3 F531 42 1 Distribution Product 1 group HERZ-COMPACT FLOOR Model Pre-assembled Control station, 230 V, 50 Hz for floor heating control and additional 2 radiator, connection on the right, circuits consisting of: - Rod distributor made of brass, flow distributor with control inserts with flow rate display and return distributor with thermostatic valves, bleed and drain valve with hose connection. - Distributor holding devices - Actuating drive for heating circuit control - Mechanical temperature control - Shutoff valve - Circulating pump - Automatic excess temperature control through disconnection of pump - Differential pressure control with overflow valve, pre-assembled in distributor cabinet made of galvanized steel sheet, front frame and door powder coated, white (RAL 9010). Adjustable installation depth (80–110 mm), cabinet height 705–775 mm, with removable pipe rail tracks. Radiator connection is not temperature controlled. Pre-assembled Control station, 230 V, 50 Hz for floor heating control and additional 2 radiator, connection on the left, circuits consisting of: - Rod distributor made of brass, flow distributor with control inserts with flow rate display and return distributor with thermostatic valves, bleed and drain valve with hose connection. - Distributor holding devices - Actuating drive for heating circuit control - Mechanical temperature control - Shutoff valve - Circulating pump - Automatic excess temperature control through disconnection of pump - Differential pressure control with overflow valve, pre-assembled in distributor cabinet made of galvanized steel sheet, front frame and door powder coated, white (RAL 9010). Adjustable installation depth (80–110 mm), cabinet height 705–775 mm, with removable pipe rail tracks. Radiator connection is not temperature controlled. Pre-assembled Control station, 230 V, 50 Hz for floor heating control, connection on the left, circuits consisting of: - Rod distributor made of brass, flow distributor with control inserts with flow rate display and return distributor with thermostatic valves, bleed and drain valve with hose connection. - Distributor holding devices - Actuating drive for heating circuit control - Mechanical temperature control - Shutoff valve - Circulating pump - Automatic excess temperature control through disconnection of pump - Differential pressure control with overflow valve, preassembled in distributor cabinet made of galvanized steel sheet, front frame and door powder coated, white (RAL 9010). Adjustable installation depth (80–110 mm), cabinet height 705–775 mm, with removable pipe rail tracks. Radiator connection is not temperature controlled. Dim. EAN 90 04174 Order number Item 3-outlets 99751 8 3 F533 03 1 4-outlets 99752 5 3 F533 04 1 5-outlets 99753 2 3 F533 05 1 6-outlets 99754 9 3 F533 06 1 7-outlets 99755 6 3 F533 07 1 8-outlets 99756 3 3 F533 08 1 9-outlets 99767 0 3 F533 09 1 10-outlets 99758 7 3 F533 10 1 11-outlets 99759 4 3 F533 11 1 12-outlets 99760 0 3 F533 12 1 3-outlets 47040 0 3 F533 13 1 4-outlets 47041 7 3 F533 14 1 5-outlets 47042 4 3 F533 15 1 6-outlets 47043 1 3 F533 16 1 7-outlets 47044 8 3 F533 17 1 8-outlets 47045 5 3 F533 18 1 9-outlets 47046 2 3 F533 19 1 10-outlets 47047 9 3 F533 20 1 11-outlets 47048 6 3 F533 21 1 12-outlets 47049 3 3 F533 22 1 3-outlets 47050 9 3 F532 13 1 4-outlets 47051 6 3 F532 14 1 5-outlets 47052 3 3 F532 15 1 6-outlets 47053 0 3 F532 16 1 7-outlets 47054 7 3 F532 17 1 8-outlets 47055 4 3 F532 18 1 9-outlets 47056 1 3 F532 19 1 10-outlets 47057 8 3 F532 20 1 11-outlets 47058 5 3 F532 21 1 12-outlets 47059 2 3 F532 22 1 129 Distribution Product 1 group HERZ-COMPACTFLOOR Dim. EAN 90 04174 Order number Item 3-outlets 99761 7 3 F532 03 1 4-outlets 99762 4 3 F532 04 1 5-outlets 99763 1 3 F532 05 1 6-outlets 99764 8 3 F532 06 1 7-outlets 99765 5 3 F532 07 1 8-outlets 99766 2 3 F532 08 1 9-outlets 99767 9 3 F532 09 1 10-outlets 99768 6 3 F532 10 1 11-outlets 99769 3 3 F532 11 1 12-outlets 99770 9 3 F532 12 1 1 99931 4 3 F532 25 1 1 92060 8 3 F532 30 1 46950 3 3 F532 35 1 Power input 230V normally open master 4-fold. 46910 7 3 F798 14 1 Power input 230V normally open Master 6-fold. 46920 6 3 F798 16 1 Power input 230V normally open Slave 4-fold. 46930 5 3 F798 24 1 Power input 230V normally open Slave 6-fold. 46940 4 3 F798 26 1 Model Pre-assembled Control station, 230 V, 50 Hz for floor heating control, consisting of: - Rod distributor made of brass, flow distributor with control inserts with flow rate display and return distributor with thermostatic valves, bleed and drain valve with hose connection. - Distributor holding devices - Actuating drive for heating circuit control - Mechanical temperature control - Shutoff valve - Circulating pump - Automatic excess temperature control through disconnection of pump - Differential pressure control with overflow valve, preassembled in distributor cabinet made of galvanized steel sheet, front frame and door powder coated, white (RAL 9010). Adjustable installation depth (80–110 mm), cabinet height 705–775 mm, with removable pipe rail tracks. HERZ-Spare Parts for COMPACTFLOOR Pump connection system, made of copper pipes, 1 pair of G1 connection nuts for pump installation, distributor connection with external thread R 1. Pump group for underfloor heating manifolds with differential pressure bypass valve, temperature limit switch, pump (3 F532 35), isolation valve and thermostatic control valve with contact sensor, factory assembled and leakage tested. Pump EAS 25/2 – 130 230 V/50 Hz 130 Distributors Product 1 group HERZ-Floor rod-type Distributor, Brass Version Model HERZ-Floor rod-type Distributor Set With flow meter 2.5 l/min, dimension 1, consisting of flow distributor with flow meter control inserts, return manifold with thermostatic upper parts, bleed and drain valve with hose connection, end caps und holding devices, staggered distributor outlets, pipe connection G 3/4, distributor with female thread Rp 1. HERZ-Single Outlet set with flow meter control insert Dimension 1, for extension of 1 8532 ff, consisting of 1 distributor with flow meter control insert, return with thermostatic upper part, control insert, 2 couplings for female thread Rp 1, control insert, 2 couplings for female thread Rp 1, pipe connection G 3/4. HERZ-Floor rod-type Distributor Set Dimension 1, consisting of flow distributor with shutoff upper parts, return manifold with thermostatic upper parts, bleed and drain valve with hose connection, end caps with holding devices, staggered distributor outlets,pipe connection G 3/4, distributor with female thread Rp 1. HERZ-Single Outlet set with thermostatic upper part Dimension 1 for extension of 1 8531 ff, consisting of 1 distributor with shutoff valve, 1 return with thermostatic upper part, 2 couplings for female thread Rp 1, radiator connection G 3/4. Dim. EAN 90 04174 Order number Item 3-outlets 81090 9 1 8532 03 1 4-outlets 81100 5 1 8532 04 1 5-outlets 81110 4 1 8532 05 1 6-outlets 81120 3 1 8532 06 1 7-outlets 81130 2 1 8532 07 1 8-outlets 81140 1 1 8532 08 1 9-outlets 81150 0 1 8532 09 1 10-outlets 81160 9 1 8532 10 1 11-outlets 81170 8 1 8532 11 1 12-outlets 81180 7 1 8532 12 1 13-outlets 81350 4 1 8532 13 1 14-outlets 81360 3 1 8532 14 1 15-outlets 81370 2 1 8532 15 1 16-outlets 81380 1 1 8532 16 1 DN 25 G1 81310 8 1 8532 93 1 3-outlets 80990 3 1 8531 03 1 4-outlets 81000 8 1 8531 04 1 5-outlets 81010 7 1 8531 05 1 6-outlets 81020 6 1 8531 06 1 7-outlets 81030 5 1 8531 07 1 8-outlets 81040 4 1 8531 08 1 9-outlets 81050 3 1 8531 09 1 10-outlets 81060 2 1 8531 10 1 11-outlets 81070 1 1 8531 11 1 12-outlets 81080 0 1 8531 12 1 13-outlets 81310 8 1 8531 13 1 14-outlets 81320 7 1 8531 14 1 15-outlets 81330 6 1 8531 15 1 16-outlets 81340 5 1 8531 16 1 DN 25 G1 81190 6 1 8531 93 1 131 Distributors Product 1 group HERZ-Floor rod-type Distributor for Raised Flow-Through, Brass Version Dim. EAN 90 04174 Order number Item Set 1-way distributor 82500 2 1 8533 93 1 Set 3-way distributor 82510 1 1 8533 03 1 Set 4-way distributor 82520 0 1 8533 04 1 Set 5-way distributor 82530 9 1 8533 05 1 Set 6-way distributor 82540 8 1 8533 06 1 Set 7-way distributor 82550 7 1 8533 07 1 Set 8-way distributor 82560 6 1 8533 08 1 Model HERZ-Floor rod-type Distributor Set, with flow meter 6 l/min, dimension 1, consisting of flow distributor with flow meters and, return distributor with thermostatic upper parts, bleed and drain valve with hose connection, end caps and holding devices, staggered distributor outlets, pipe connection G 3/4, distributor with female thread Rp 1. Distributor Outlet G 3/4 Set 9-way distributor 82570 5 1 8533 09 1 Set 10-way distributor 82580 4 1 8533 10 1 Set 11-way distributor 82590 3 1 8533 11 1 Set 12-way distributor 82600 9 1 8533 12 1 Set 13-way distributor 82610 8 1 8533 13 1 Set 14-way distributor 82620 7 1 8533 14 1 Set 15-way distributor 82630 6 1 8533 15 1 Set 16-way distributor 82640 5 1 8533 16 1 2-outlets 84500 0 1 8531 42 1 HERZ-Floor rod-type Distributor Set HERZ-Floor rod-type Distributor Set, with flow meter 6 l/min, dimension DN 32, consisting of flow distributor with flow meters and, return distributor with thermostatic upper parts. With bleed and drain valves, end caps and holding devices. Staggered distributor outlets, pipe connection G 3/4, distributor with female thread Rp 5/4. 3-outlets 84510 9 1 8531 43 1 4-outlets 84520 8 1 8531 44 1 5-outlets 84530 7 1 8531 45 1 6-outlets 84540 6 1 8531 46 1 7-outlets 84550 5 1 8531 47 1 8-outlets 84560 4 1 8531 48 1 9-outlets 84570 3 1 8531 49 1 10-outlets 84580 2 1 8531 50 1 11-outlets 84590 1 1 8531 51 1 12-outlets 84600 7 1 8531 52 1 13-outlets 84610 6 1 8531 53 1 14-outlets 84620 5 1 8531 54 1 15-outlets 84630 4 1 8531 55 1 16-outlets 84640 3 1 8531 56 1 3/4 84450 8 1 8535 01 1 1 84460 7 1 8535 02 1 5/4 84470 6 1 8535 03 1 Spare Parts Distributor holding device for installation of distributor in cabinet 1 pair for compact distributor 1 8528. 1 pair for compact distributor 1 8530/31/32/33. 1 pair for compact distributor 1 8529. Product 6 group HERZ-Ball valve Model EURO- ball valve with nipplesand T- handle. Body made of forged brass to DIN 17660-plated, seals materials are PTFE and NBR. Temperature range -10 °C to 110 °C (water 0 °C to 110 °C). 132 PN Dim. EAN 383 000282 Order number Item 16 15 6653 1 2911 11 25 16 20 6660 1 2911 12 25 16 25 6677 1 2911 13 16 Distributors Product 1 group HERZ-Distributor Cabinets EAN 90 04174 Order number Item Section width 300 mm 81200 2 1 8569 03 1 Section width 400 mm 81210 1 1 8569 04 1 Section width 500 mm 81220 0 1 8569 05 1 Section width 600 mm 81230 9 1 8569 10 1 Section width 750 mm 81240 8 1 8569 15 1 Section width 900 mm 81250 7 1 8569 20 1 Section width 1050 mm 81260 6 1 8569 25 1 Section width 1200 mm 81270 5 1 8569 30 1 Section width 1500 mm 81280 4 1 8569 40 1 Model Dim. HERZ-Distributor cabinet, made of steel plate Galvanised, front door and front frame powder coated, white (RAL 9003). Adjustable installation depth (80-110 mm), cabinet height (705-775 mm), fastening rail for distributor holding devices as well as front screen. With removable pipe rail tracks. Cabinet door with bolt. Product 5 group Electric Distribution Panel for Actuating Signals For distribution of electric signals and for power supply of control devices and actuating drives. The switch impulse of the room temperature controller are individually passed to the actuating drives. Plastic body, white RAL 9010, with integrated fuse 4 A, over voltage protection for actuating drives, pump connection with earthed conductor and temperature limiter, pump logistics as needed (24 V or 230 V) with volt-free contacts available as accessories. Electrical connections with screw clamps max. 1.5 mm². 99935 2 3 F798 00 1 133 Spare Parts Product 1 group HERZ-Spare upper part for distributors for floor heating EAN 90 04174 Order number Item 63460 4 1 6403 31 1 63480 2 1 6413 00 1 63470 3 1 6413 01 1 HERZ-Flow Meter Control range 0 to 2.5 l/min Built in floor heatings flow manifold 8532. Built 2005. 99932 1 3 F900 01 1 HERZ-Flow Meter Control range 0-6 l/min Built in floor cooling-flow manifold 8531 and 8532 built from 1999. 99933 8 3 F900 02 1 Thermostat upper part Spare upper part for return manifold, for cast iron distributor with body marking ∆ (triangle), from built in 1999. 63440 6 1 6403 02 1 Shut upper part for return manifold, for cast iron distributor with body marking ∆ (triangle), from built in 1999. 63450 5 1 6413 02 20 62630 3 1 6303 00 20 61260 2 1 6372 02 20 Model HERZ-TS-Spare upper part for distribution 8531 and 8532nd. HERZ-Flowmeter for floor heating - return manifold 8532 built till 2005. HERZ-Shutoff upper part for flow manifold 8531 built till 2005. Shut upper part Spare upper part for flow manifold für for distributors with body marking O (ring), built till 1999. Thermostat upper part Spare upper part for return manifold, for cast iron distributor with body marking O (ring), built till 1999. 134 Heating Product 5 group Tacker, panels for underfloor heating system System of aluminum metallized role, high tear resistant fabric film, with sound insulation foam, thermal conductivity 0.041 W/mK, fire behavior B1 according to ÖNORM B 3800, B1 to DIN 4102, load capacity 3.5 kN/m², printed with grid in the distance 50 mm, 40 mm wide self-overlapping one side. Easy installation by rolling out the system role and fixing the pipes with tacks. Model Dim. Tackerroll, from quality-monitored EPS-T laminated and metallized highly tear-resistant fabric foil (AL-PET) according to EN 13163 with a imprinted Raster-5 cm and one-sided 4 cm wide self-adhesive Overlap. Tackerpanel, from quality-monitored EPS-T laminated and metallized highly tear-resistant fabric foil (AL-PET) according to EN 13163 with a imprinted Raster-5 cm and one-sided 4 cm wide self-adhesive Overlap. 15-2 rolled EAN 90 04174 Order number Item 99719 8 3 F040 01 10 m² 22/20 rolled 1000 x 10000 99720 4 3 F040 02 10 m² 32/30 rolled 1000 x 10000 99721 1 3 F040 03 10 m² 15-2 rolled 1000 x 2000 99722 8 3 F040 04 2 m² 22/20 rolled 1000 x 2000 99723 5 3 F040 05 2 m² 32/30 rolled 1000 x 2000 99724 2 3 F040 06 2 m² 1000 x 500 x 57 mm 99716 7 3 F030 01 6 m² 1000 x 500 x 44 mm 99717 4 3 F030 02 7,5 m² 1400 x 800 x 20 mm 99718 1 3 F030 03 13,44 m² 92070 7 3 F030 04 1000 x 10000 Tacker, studded panel Studded panel with insulation, black, polystyrene foam, 35–2 mm for pipe diameters of 14–17 mm, 50 mm film overlap Studded panel with insulation, black, polystyrene foam, 15 mm for pipe diameters of 14–17 mm, 50 mm film overlap Studded panel, black polystyrene for individual execution of the Insulation, film 50 mm overlap. Diagonal bracket for diagonal installation of the pipes. 40 135 Heating Product 5 group Heat insulation plate Heat insulation plate of polyurethane polyurethane foam, FCKW-free, quality controlled according to DIN 18164 Part 1, on both sides aluminum coated. Building material class B2 according to DIN 4102. WLG 025 EAN 90 04174 Model Heat insulation plate 30 Board size 1200 x 600 x 30 mm, Thermal resistance Rl = 1.2 Heat insulation plate 40 Board size 1200 x 600 x 40 mm,Thermal resistance Rl = 1.6 Heat insulation plate 47 Board size 1200 x 800 x 47 mm,Thermal resistance Rl = 1.88 Heat insulation plate 53 Board size 1200 x 800 x 40 mm,Thermal resistance Rl = 2.12 Order number Item 99878 2 3 F070 30 11,52 m² 99879 9 3 F070 40 8,64 m² 99880 5 3 F070 47 9,60 m² 99881 2 3 F070 53 9,60 m² 99882 9 3 F090 00 1 Stk. 99883 6 3 F090 01 10 kg 99884 3 3 F090 02 1 Rolle Miscellaneous Accessories Level indicator for screed Level indicator for screed for measurements on the rules of DIN EN 1264. Screed additive The screed additive homogenized cement screed and thus brings about a better thermal conductivity and increases Compressive and tensile strength. Consumption of about 0.2 l/m². Adhesive tape For bonding the edges Pannels, and insulation against the penetration water into screed. Transparent, waterproof. 136 Underfloor Product 5 group The Insulation strips made of polyethylene with foil and slits for separation according to DIN 18560. On one side, on the edge of the foil band is sticky, also available without adhesive. EAN 90 04174 Order number Item RDS 8/160 MK, 8 x 160 mm, with adhesive. 99885 0 3 F080 02 4 Rollen a 25 m RDS 8/160 OK, 8 x 160 mm, without adhesive 99886 7 3 F080 03 4 Rollen a 25 m Kit for pipe laying. To secure the distribution of stacking of pipes on the surface corresponds to DIN 18560. In a double T-profile is fixed Polyethylene fillet width of 8 mm, which prevents the movement of pipes. This (2 meter long) self-adhesive profile allows you to lay pipes for floor heating systems at a distance of 5 cm from each other. Consists of a 20 m profile fillet, 20 meters of the elastic bands 8/100, 50 pieces of protective tubes 400 mm long. 99887 4 3 F100 00 20 m / 20 m / 50 Stk. Expansion strip Double-T profile of polystyrene, standard length 2 m self-adhesive. 2000 x 35 x 20 mm. 99888 1 3 F100 01 50 m Protection tube for expansion strip Corrugated pipes 12–18 mm, slit longitudinally. 99889 8 3 F100 02 50 Stk. Inlets for expansion strip Universal expansion strip of polyethylene to prevent tension and flanking path and according to DIN 18560, length 2 m. 99890 4 3 F100 03 50 m 99891 1 3 F100 04 7 Rollen je 25 m PE-Folie 0,1, Roll size 25 x 4 m, Stärke 0,1 mm. 99892 8 3 F100 05 100 m2 PE-Folie 0,2, Roll size 25 x 4 m, Stärke 0,2 mm. 99893 5 3 F100 06 100 m2 Model Set expansion joint for floor screed Fastener strip of polyethylene, 10 x 160 mm, standard length 25 m 10 x 160 mm, standard length 25 m. Polyethylene cover Clamp Strip Rack rail, U-profile, special construction for pipes 16 and 17 x 2, extruded fastening rail with formed pipe fastening clips. Easy, compact and low model prevents weakening of undercoating, suitable for all rigid coatings on top, including plates, natural stones and ceramic coatings, quick installation with clips. Fastening on thermal insulation by adhesive tape on both sides or by fastening needles via pre-punch. Pipe distance 50 mm. L x B x H = 200 x 40 x 25 mm. 99972 7 3 F110 18 100 Stk. Fixing needles, red, for direct fastening of insulation thickness 30 mm and higher. Thanks to the special material this fixing needle offers the best holding force which can even be increased when the needle is pushed in diagonally. 99896 6 3 F110 03 500 Fixing needles, green, for direct fastening of insulation of thickness 40 mm and higher. Thanks to the special material this fixing needle offers the best supporting forces which can even be increased when the needle is pushed in diagonally. 99897 3 3 F110 04 500 99898 0 3 F110 05 1000 Tacker needle for fastening of heating pipe on insulation. Packed in units of 30 pieces, fastened by scotch tape. Black. Processing using a stapler setting device 3 F110 13 permits a simple and efficient pipe fitting. 99899 7 3 F110 06 300 Tacker needle, special model, extra long needles, especially suitable for non-lined surfaces made of high- quality polyamide, in units of 30 pieces. Processing using a stapler setting device 3 F110 13 permits a simple and efficient pipe fitting. 99900 0 3 F110 07 300 Fixing Needles Tacker Needles Clips 1622, red, for grid mats, thickness of support mat 3, 4, 5 mm. Tacker Needles 137 Underfloor Product 1 5 group Angled Pipe Clamp Plastic angled pipe clamp for 90° bends of heating pipes in ceiling apertures, distribution feeds, etc. Model EAN 90 04174 Order number Item 99901 7 3 F110 08 500 99902 4 3 F110 09 50 99928 4 3 F110 17 100 Stk. 99904 8 3 F110 11 50 99905 5 3 F110 12 50 99906 2 3 F110 13 1 Stk. Plastic angled pipe clamp. 14–18 mm Plastic angled pipe clamp for pipes 20–23 mm Plastic Dowel Plastic dowel for additional fastening of insulation, length 90 mm, bore diameter 8 mm. Pipe holder anchor Single-pipe retaining dowel, 90 mm Double-pipe holding strap, 90 mm Tools Tacker The tacker ensures an easy and efficient installation of the heating pipe which can be securely fastened on the insulation in just one step. Combi Tacker for both needle versions 3 F110 06 and 3 F110 7 as well as commercially available needles, with plastic foot. Heat cutting machine HANDSET including the cutting tip for cutting individual pipe guides in the filling and distributing. Voltage: 230 V - 50 Hz (110 V - 60 Hz) Power consumption 60 W Protection class II 2 m power cable with Euro plug, heating time of the cutting tip 6-8 sec. Heat cutting machine complete Replacement cutting tip N-1 99907 9 3 F110 14 1 99908 6 3 F110 15 1 99909 3 3 F110 16 1 Hand dispensers Hand dispensers for adhesive tape to seal edges the insulation taxiways and insulating boards. 138 Pipe Product 2 group HERZ-HT-Plastic Composite Pipe, PE-RT, HD HT AluminiumDiameter Insulation wall Wall thickness thickness (mm) (mm) Model Tubing EAN 90 04174 Order number Item reels (m) 0.25 16 x 2 93000 3 3 C160 22 200 0.25 18 x 2 93001 0 3 C180 30 200 0.25 20 x 2 93002 7 3 C200 30 200 0.4 16 x 2 99772 3 3 C160 20 200 0.4 20 x 2 99774 7 3 C200 20 100 0.5 26 x 3 99775 4 3 C260 30 50 0.5 32 x 3 99776 1 3 C320 30 50 0.5 40 x 3.5 99777 8 3 C400 30 50 EAN 90 04174 Order number VKE Rods (m) 16 x 2 99778 5 3 C160 34 5 0.4 20 x 2 99779 2 3 C200 34 5 0.5 26 x 3 99780 8 3 C260 35 5 0.5 32 x 3 99781 5 3 C320 35 5 0.5 40 x 3.5 99782 2 3 C400 36 5 0.6 50 x 4 99000 7 3 C500 40 5 0.8 63 x 4.5 99010 6 3 C630 45 5 EAN 90 04174 Order number VKE reels (m) Plastic Composite Pipe PE-RT, HD HT AluminiumDiameter Insulation wall Wall thickness thickness (mm) (mm) Model HERZ-HT-Plastic Composite Pipe 0.4 Plastic Composite Pipe PE-RT, HD FH AluminiumDiameter Insulation wall Wall thickness thickness (mm) (mm) Model Herz-FH-Plastic Composite Pipe, in reels. 0.2 10 x 1,3 93003 4 3 C101 30 250 0.2 14 x 2 93004 1 3 C140 30 200 0.2 16 x 2 99708 2 3 D160 20 200 139 Pipe Product 1 2 group HERZ-HT-Plastic Composite Pipe, PE-RT HT with Insulation Insulation wall Diameter thickness Wall thickness (mm) (mm) Model HERZ-HT-Plastic Composite Pipe Heating and plumbing pipes with heat-insulation from PE-LD froth of PP Thermal conductivity of 0.04 W/mK as per DIN EN 8497 Reaction to fire according to DIN 4102 B1 CFC and HCFC free Water vapor diffusion number ≥ 6000 to 52 615 DSIN Outer casing gray, black lettering EAN 90 04174 Order number Item Roll (m) 6 16 x 2 93014 0 3 C160 06 100 6 20 x 2 93015 7 3 C200 06 50 6 26 x 3 93017 1 3 C260 06 50 6 32 x 3 93018 8 3 C320 06 25 9 16 x 2 93019 5 3 C160 09 100 9 20 x 2 93020 1 3 C200 09 50 9 26 x 3 93022 5 3 C260 09 50 9 32 x 3 93023 2 3 C320 09 25 13 16 x 2 93024 9 3 C160 13 50 13 20 x 2 93025 6 3 C200 13 50 13 26 x 3 23026 3 3 C260 13 25 13 32 x 3 93028 7 3 C320 13 25 16 x 2 99787 7 3 C160 33 50 20 x 2 99788 4 3 C200 33 50 HERZ-HT-Plastic Composite Pipe, “Pipe in pipe” HERZ-HT-Plastic Composite Pipe, black 140 Connections Product 3 group Junction, Press to Screw Fitting, flat sealing EAN 90 04174 Order number Item 14 x 2 - G 3/4 13970 3 P 7014 41 50 16 x 2 - G 3/4 13980 2 P 7016 41 50 18 x 2 - G 3/4 14000 6 P 7018 41 50 20 x 2 - G 3/4 14020 3 P 7020 41 50 16 x 2 - G 1 13990 1 P 7016 42 100 18 x 2 - G 1 14010 5 P 7018 42 100 20 x 2 - G 1 14040 2 P 7020 42 100 26 x 3 - G 1 14100 3 P 7026 42 80 26 x 3 - G 1¼ 14110 2 P 7026 43 50 32 x 3 - G 1¼ 14120 1 P 7032 43 50 40 x 3.5 - G 1¼ 14140 9 P 7040 43 30 32 x 3 - G 1½ 14130 0 P 7032 44 40 40 x 3.5 - G 1½ 14150 8 P 7040 44 30 50 x 4 - G 1½ 14170 6 P 7050 44 16 40 x 3.5 - G 2 14160 7 P 7040 45 20 50 x 4 - G 2 14180 6 P 7050 45 16 63 x 4.5 - G 2½ 14190 4 P 7063 46 14 Model 141 Connections Product 3 group Junction Press Screw Fitting with cone Model Nickel-plated Unplated Dim. EAN 90 04174 Order number Item 14 x 2 - M 22 x 1.5 14890 3 P 7014 86 150 16 x 2 - M 22 x 1.5 14900 9 P 7016 86 150 18 x 2 - M 22 x 1.5 14920 7 P 7018 86 150 20 x 2 - M 22 x 1.5 14930 6 P 7020 86 150 14 x 2 - G 1/2 14950 4 P 7014 90 150 16 x 2 - G 1/2 14960 3 P 7016 90 150 18 x 2 - G 1/2 14980 1 P 7018 90 150 20 x 2 - G 1/2 14990 0 P 7020 90 150 14 x 2 - G 3/4 14830 9 P 7014 82 150 16 x 2 - G 3/4 14840 8 P 7016 82 150 18 x 2 - G 3/4 14860 6 P 7018 82 150 20 x 2 - G 3/4 14870 5 P 7020 82 140 14 x 2 - G 3/4 14770 8 P 7014 81 150 16 x 2 - G 3/4 14780 7 P 7016 81 150 18 x 2 - G 3/4 14800 2 P 7018 81 150 20 x 2 - G 3/4 14810 1 P 7020 81 140 14 x 2 - G 3/4 11210 2 P 7114 14 150 16 x 2 - G 3/4 11220 1 P 7116 14 60 18 x 2 - G 3/4 11230 0 P 7118 14 50 20 x 2 - G 3/4 11240 9 P 7120 14 50 Angle Screw Connection Angle screw connection for HERZ-3000 Product 1 group HERZ-Screw Connections Connection elbow 90° made of brass, nickel-plated, pipe connection with external thread M 22 x 1.5 with freely moving nut and cone seal. M 22 x 1.5 60420 1 1 6248 16 1 Connection elbow 90° made of brass, nickel-plated, pipe connection with external thread G 3/4 with freely moving nut and cone seal. G 3/4 62270 0 1 6248 01 1 Screw connection short version, with cone seal and freely moving nut G 3/4, length 30 mm. G 3/4 10551 7 1 3011 02 2 G 3/4 x M 22 76270 3 1 6223 22 20 Screw connection long version, with cone seal and freely moving nut G 3/4, length 38 mm. G 3/4 10561 6 1 3011 03 1 Compensation adapter, set of 2 units, to balance different pipe connections, radius 15 mm, valve connection 3/4 with cone seal, freely moving nut, pipe connection 3/4 male thread. G 3/4 32570 0 1 3004 15 1 Set G 3/4 x 1/2 IG 63610 3 1 6223 01 1 G 1 x 1 IG 66320 8 1 6220 73 1 Adapter, set of 2 units Nickel-plated, with flat seal and cone. 3/4 10571 5 1 6262 70 20 Self-sealing screw connection, with flat seal, external thread 1/2 with freely moving nut 3/4. 1/2 10581 4 1 6220 70 1 G 3/4 10591 3 1 6220 71 20 Threaded pipe connection with freely moving nut. Threaded pipe connection with freely moving nut. Connection nipples with freely moving nut. Screw connection, set of 2 units with cone seal G 3/4 and flat seal G 3/4. 142 Connections Product 1 group HERZ-Threaded Connection Elements with cone Shoulder throw Dim. EAN 90 04174 Order number Item Iron pipe connection with cone, connection cone 90°, nut and connection element. 5/4 1 60040 1 1 6209 03 20 1¾ 1¼ 62590 9 1 6209 04 20 Iron pipe connection with cone. Nut and connection element. 5/8 3/8 60050 0 1 6210 00 20 Model 3/4 1/2 60080 7 1 6210 21 20 1/2 x 26 60090 6 1 6210 26 20 1/2 x 35 60070 8 1 6210 11 20 3/4 60060 9 1 6210 02 20 G 3/4 x 1/2 63180 1 1 6210 44 20 G 3/4 x 1/2 66290 4 1 6252 11 20 Radiator connection with PTFE-Ring, iron pipe connection with freely moving nut, radiator connection G 1/2, self-sealing. M22 x G1/2 10601 9 1 6252 01 20 Radiator connection, brass version, for valves, 3/4 on radiator socket 1/2, nickel-plated, nut and connection element, with cone seal. G1 x Rp1/2 65440 4 1 6210 12 20 Radiator connection for valves 1/2 on radiator sleeve 3/8, with cone, nut and connection element. 1/2 x 3/8 60100 2 1 6211 00 20 Radiator connection for valves 3/8 on radiator sleeve 1/2, with cone, nut and connection element. 3/8 x 1/2 60110 1 1 6213 01 20 Threaded bush, long without nut, with cone. Can be shortened in order to compensate for differences in structural dimensions. 3/8 x 40 60120 0 1 6218 00 20 1/2 x 76 60130 9 1 6218 01 20 3/4 x 70 60140 8 1 6218 02 20 Threaded bush without nut, with cone. 1/2 x 39 60150 7 1 6218 11 20 1/2 x 42 60160 6 1 6218 21 20 1/2 x 48 60170 5 1 6218 31 20 1/2 x 36 60180 4 1 6218 41 20 1/2 x 76 60190 3 1 6218 51 20 10 x 12 60330 3 1 6235 10 20 20 x 18 60340 2 1 6235 12 20 15 x 12 60350 1 1 6235 21 20 15 x 15 60360 0 1 6235 31 20 15 x 18 65360 5 1 6235 41 20 10 60430 0 1 6249 00 20 15 60440 9 1 6249 01 20 20 60450 8 1 6249 02 20 1 x 1/2 60200 9 1 6219 03 1 1¼ x 1/2 60210 8 1 6219 04 1 1 x 3/4 60220 7 1 6219 05 1 1¼ x 3/4 60230 6 1 6219 14 1 1 Radiator connection, with cone seal, nut and connection element without cover sleeve DE LUXE. Radiator connection with freely moving nut G 3/4 and O-Ring seal. Soldering connection with cone seal, brass nut, nickel-plated, soldering nipple made of copper. Iron pipe connection elbow 90° made of brass, nickel-plated, with cone seal, without nut. Reduction Socket Reduction Socket For connection of pipe and valve, brass version. Female thread (pipe) x external thread (valve). 143 Connections Product 1 group HERZ-Threaded Connection Elements with cone flat seal Iron pipe connection Model Iron pipe connection with flat seal with nut and seal, Rc for 4037, 7762, 7763, 7760. Iron pipe connection with flat seal with nut, connection element and seal. 4004, 4315, 4325, 4415, 4417, 4207, 7761, 7217, 4216, 7766. Rp Shoulder throw 3/8 G 5/8 - 1 6220 00 1 1/2 G 3/4 62480 3 1 6220 21 20 3/4 G1 62490 2 1 6220 12 20 1¼ G 1½ 66000 9 1 6220 64 20 1¼ G2 66170 9 1 6220 74 20 1½ G 2¼ 66180 8 1 6220 75 20 2 G 2¾ 66170 7 1 6220 76 20 1/2 x 38 mm G 3/4 60240 5 1 6220 11 20 3/4 x 44 mm G1 60270 2 1 6220 22 20 1 G 1¼ 65990 4 1 6220 63 20 1½ G 1¾ 66010 8 1 6220 65 20 66020 7 1 6220 66 20 2 G2 3 8 EAN 90 04174 Order number Item Soldering connection Soldering connection with flat seal with nut and seal, soldering nipple made of copper for 4037, 7762, 7763, 7760. Soldering connection with flat seal with nut made of brass, soldering nipple made of copper and seal. 4004, 4315, 4325, 4415, 4417, 4207, 7761, 7217, 4216, 7766. 12 mm G 1/2 - 1 6236 00 1 15 mm G 3/4 62520 6 1 6236 11 20 22 mm G1 62600 5 1 6236 22 20 35 mm G2 66140 2 1 6236 74 20 42 mm G 2¼ 66150 1 1 6236 75 20 54 mm G 2¾ 66160 0 1 6236 76 20 12 mm G 3/4 62510 7 1 6236 01 20 18 mm G 3/4 62530 5 1 6236 21 20 15 mm G1 62540 4 1 6236 02 20 18 mm G1 62550 3 1 6236 12 20 28 mm G 1¼ 65950 8 1 6236 63 20 35 mm G 1½ 65960 7 1 6236 64 20 42 mm G 1¾ 65970 6 1 6236 65 20 3 54 mm G2 8 65980 5 1 6236 66 20 Welding connection Welding connection with flat seal with nut, welding nipple and seal. 4004, 4315, 4325, 4415, 4417, 4207, 7761, 7217, 4216, 7766. 21 mm G 3/4 60370 9 1 6240 01 20 26.5 mm G1 62500 8 1 6240 02 20 33.7 mm G 1¼ 65910 2 1 6240 63 20 41.5 mm G 1½ 65920 1 1 6240 64 20 47.5 mm G 1¾ 65930 0 1 6240 65 20 60.3 mm G 23 8 65940 9 1 6240 66 20 1/2 G1 63490 1 1 6221 02 20 21 mm G1 63500 7 1 6241 02 20 3/4 3/4 x M 22 x 1.5 60400 3 1 6244 01 20 Welding connection Reduction connection with flat seal, 1 x 1/2 nut and connection element. Reduction connection with flat seal, DN 20 on DN 15 welding connection, nut and connection element. Adapter for iron pipe connection 144 Connections Product 1 group HERZ-Connection fittings; threaded flat seat DN EAN 90 04174 Order number Item 15 x 1/2 65170 0 1 6220 51 20 20 x 3/4 65180 9 1 6220 52 20 25 x 1 65190 8 1 6220 53 20 32 x 1¼ 65200 4 1 6220 54 20 40 x 1½ 65210 4 1 6220 55 20 50 x 2 65220 2 1 6220 56 20 Solder flat seat without nut and seal. 15 x 12 64940 0 1 6236 50 20 15 x 15 64950 9 1 6236 51 20 Dimension = Pipe diameter in mm. 15 x 18 64960 8 1 6236 52 20 20 x 22 64970 7 1 6236 53 20 25 x 28 64980 6 1 6236 54 20 32 x 35 64990 5 1 6236 55 20 40 x 42 65000 0 1 6236 56 20 50 x 54 65010 9 1 6236 57 20 Welding connection, flat sealing without nut and gasket. 15 x 17.2 65020 8 1 6240 50 20 15 x 21.3 65030 7 1 6240 51 20 Dimension = Outer diameter of the Connecting piece. Welding connection, flat sealing, DN 50 x 60.3 mm. 20 x 26.9 65040 6 1 6240 52 20 25 x 33.7 65050 5 1 6240 53 20 32 x 42.4 65060 4 1 6240 54 20 40 x 48.3 65070 3 1 6240 55 20 50 x 60.3 65080 2 1 6240 56 20 Dim. EAN 90 04174 Order number Item 3/8 41080 2 1 4144 00 25 1/2 41090 1 1 4144 01 25 3/4 41100 7 1 4144 02 25 1 41110 6 1 4144 03 1 1¼ 41120 5 1 4144 04 1 3/8 41130 4 1 4145 00 25 1/2 41140 3 1 4145 01 25 3/4 41150 2 1 4145 02 25 1 41160 1 1 4145 03 1 1¼ 41170 0 1 4145 04 1 Model Threaded flat seat Dimension = Outer diameter of the fitting without nut and gasket. HERZ-Threaded Radiator Connections Model HERZ-Threaded radiator connection Straight model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. Standard model with threaded socket. HERZ-Threaded radiator connection Angle model Radiator connection with cone. Universal models with special sockets for threaded pipes and compression adapter. Standard model with threaded socket. 145 Press fittings Product 3 group Press Straight Coupling EAN 90 04174 Order number Item 10 x 1.3 - 10 x 1.3 10621 7 P 7010 00 10 14 x 2 - 14 x 2 13110 3 P 7014 00 200 16 x 2 - 16 x 2 13120 2 P 7016 00 200 18 x 2 - 18 x 2 13140 0 P 7018 00 150 20 x 2 - 20 x 2 13150 9 P 7020 00 150 26 x 3 - 26 x 3 13190 5 P 7026 00 100 32 x 3 - 32 x 3 13200 1 P 7032 00 50 40 x 3.5 - 40 x 3.5 13210 0 P 7040 00 30 50 x 4 - 50 x 4 13220 9 P 7050 00 20 63 x 4.5 - 63 x 4.5 13230 8 P 7063 00 20 16 x 2 - 14 x 2 13240 7 P 7016 01 200 18 x 2 - 14 x 2 13250 6 P 7018 01 150 18 x 2 - 16 x 2 13260 5 P 7018 02 150 20 x 2 - 14 x 2 13270 4 P 7020 03 150 20 x 2 - 16 x 2 13280 3 P 7020 01 150 20 x 2 - 18 x 2 13300 8 P 7020 02 150 26 x 3 - 16 x 2 13380 0 P 7026 01 100 26 x 3 - 18 x 2 13400 5 P 7026 05 100 26 x 3 - 20 x 2 13410 4 P 7026 02 100 32 x 3 - 16 x 2 13430 2 P 7032 01 60 32 x 3 - 18 x 2 13440 1 P 7032 07 60 32 x 3 - 20 x 2 13450 0 P 7032 02 60 32 x 3 - 26 x 3 13490 6 P 7032 06 60 40 x 3.5 - 26 x 3 13510 1 P 7040 02 50 40 x 3.5 - 32 x 3 13520 0 P 7040 03 40 50 x 4 - 26 x 3 13530 9 P 7050 01 20 50 x 4 - 32 x 3 13540 8 P 7050 02 20 50 x 4 - 40 x 3.5 13550 7 P 7050 03 20 63 x 4.5 - 26 x 3 13560 6 P 7063 01 20 63 x 4.5 - 32 x 3 13570 5 P 7063 02 20 63 x 4.5 - 40 x 3.5 13580 4 P 7063 03 20 63 x 4.5 - 50 x 4 13590 3 P 7063 04 20 Model T-Piece, middle outlet, reducedT-Piece, middle outlet, reduced 146 Press fittings Product 3 group T-Piece Dim. EAN 383 000282 Order number Item 14 x 2 11940 8 P 7214 00 100 16 x 2 11950 7 P 7216 00 60 18 x 2 11970 5 P 7218 00 50 20 x 2 11980 4 P 7220 00 50 26 x 3 12020 6 P 7226 00 30 32 x 3 12030 5 P 7232 00 25 40 x 3.5 12040 4 P 7240 00 15 50 x 4 12050 3 P 7250 00 10 63 x 4.5 12060 2 P 7263 00 8 14 x 2 - 16 x 2 - 14 x 2 12990 2 P 7214 01 60 16 x 2 - 18 x 2 - 16 x 2 13000 7 P 7216 05 50 16 x 2 - 20 x 2 - 16 x 2 13010 6 P 7216 03 50 20 x 2 - 26 x 3 - 20 x 2 13040 3 P 7220 06 30 26 x 3 - 32 x 3 - 26 x 3 13090 8 P 7226 17 30 32 x 3 - 40 x 3.5 - 32 x 3 13100 4 P 7232 10 5 40 x 3.5 - 50 x 4 - 40 x 3.5 18200 6 P 7240 12 10 15-16 x 2.0 9654 P 7216 62 50 15-18 x 2.0 9661 P 7218 62 50 15-20 x 2.0 9678 P 7220 62 50 25-26 x 3.0 9715 P 7226 62 50 Model T-Piece With equal outlets. T-Piece Centre outlet larger. HERZ-Ball valve with lever handle and press connection Ball valve with lever handle and press connection Body made of forged brass to DIN 17660, from both sides press connection for plastic composite pipe. PN 16. 147 Press fittings Product 3 group T-Piece, middle outlet, reduced EAN 90 04174 Order number Item 16 x 2 - 14 x 2 - 16 x 2 12070 1 P 7216 01 60 18 x 2 - 14 x 2 - 18 x 2 12080 0 P 7218 01 50 18 x 2 - 16 x 2 - 18 x 2 12090 9 P 7218 02 50 20 x 2 - 10 x 1.3 - 20 x 2 12082 4 P 7210 00 10 20 x 2 - 16 x 2 - 20 x 2 12100 5 P 7220 01 50 20 x 2 - 14 x 2 - 20 x 2 12120 3 P 7220 10 50 20 x 2 - 18 x 2 - 20 x 2 12110 4 P 7220 02 50 26 x 3 - 16 x 2 - 26 x 3 12210 1 P 7226 03 5 26 x 3 - 18 x 2 - 26 x 3 12220 0 P 7226 04 30 26 x 3 - 20 x 2 - 26 x 3 12230 9 P 7226 05 30 32 x 3 - 16 x 2 - 32 x 3 12240 8 P 7232 01 30 32 x 3 - 18 x 2 - 32 x 3 12250 7 P 7232 03 30 32 x 3 - 20 x 2 - 32 x 3 12260 6 P 7232 04 30 32 x 3 - 26 x 3 - 32 x 3 12290 3 P 7232 07 30 40 x 3.5 - 26 x 3 - 40 x 3.5 12320 7 P 7240 02 20 40 x 3.5 - 32 x 3 - 40 x 3.5 12330 6 P 7240 03 20 50 x 4 - 26 x 3 - 50 x 4 12350 4 P 7250 03 2 50 x 4 - 32 x 3 - 50 x 4 12360 3 P 7250 01 2 50 x 4 - 40 x 3.5 - 50 x 4 12370 2 P 7250 02 2 63 x 4.5 - 32 x 3 - 63 x 4.5 12380 1 P 7263 01 10 63 x 4.5 - 40 x 3.5 - 63 x 4.5 12390 0 P 7263 02 10 63 x 4.5 - 50 x 4 - 63 x 4.5 12400 6 P 7263 03 10 Model 148 Press fittings Product 3 group T-Piece, reduced EAN 90 04174 Order number Item 16 x 2 - 14 x 2 - 14 x 2 12410 5 P 7216 02 60 18 x 2 - 16 x 2 - 14 x 2 12420 4 P 7218 04 50 18 x 2 - 16 x 2 - 16 x 2 12430 3 P 7218 03 50 20 x 2 - 14 x 2 - 16 x 2 12500 3 P 7220 11 50 20 x 2 - 16 x 2 - 16 x 2 12450 1 P 7220 03 50 20 x 2 - 16 x 2 - 18 x 2 12470 9 P 7220 07 50 20 x 2 - 18 x 2 - 18 x 2 12460 0 P 7220 04 50 20 x 2 - 20 x 2 - 14 x 2 12480 8 P 7220 09 50 20 x 2 - 20 x 2 - 16 x 2 12490 7 P 7220 08 50 26 x 3 - 16 x 2 - 20 x 2 12630 7 P 7226 11 30 26 x 3 - 18 x 2 - 18 x 2 12650 5 P 7226 18 30 26 x 3 - 18 x 2 - 20 x 2 12660 4 P 7226 12 30 26 x 3 - 20 x 2 - 16 x 2 12670 3 P 7226 13 30 26 x 3 - 20 x 2 - 20 x 2 12680 2 P 7226 14 30 26 x 3 - 26 x 3 - 16 x 2 12720 5 P 7226 16 30 26 x 3 - 26 x 3 - 20 x 2 12730 4 P 7226 15 30 32 x 3 - 20 x 2 - 26 x 3 12740 3 P 7232 11 30 32 x 3 - 26 x 3 - 26 x 3 12790 8 P 7232 09 30 32 x 3 - 32 x 3 - 20 x 2 12800 4 P 7232 15 30 32 x 3 - 32 x 3 - 26 x 3 12830 1 P 7232 14 30 40 x 3.5 - 26 x 3 - 32 x 3 12870 7 P 7240 06 20 40 x 3.5 - 32 x 3 - 32 x 3 12840 0 P 7240 04 20 40 x 3.5 - 40 x 3.5 - 26 x 3 12890 5 P 7240 07 20 40 x 3.5 - 40 x 3.5 - 32 x 3 12900 1 P 7240 08 20 50 x 4 - 32 x 3 - 40 x 3.5 12920 9 P 7250 06 20 50 x 4 - 40 x 3.5 - 40 x 3.5 12910 0 P 7250 05 20 50 x 4 - 50 x 4 - 32 x 3 12930 8 P 7250 07 20 50 x 4 - 50 x 4 - 40 x 3.5 12940 7 P 7250 08 20 63 x 4.5 - 40 x 3.5 - 50 x 4 12950 6 P 7263 04 5 63 x 4.5 - 50 x 4 - 50 x 4 12960 5 P 7263 05 5 63 x 4.5 - 63 x 4.5 - 40 x 3.5 12970 4 P 7263 06 5 63 x 4.5 - 63 x 4.5 - 50 x 4 12980 3 P 7263 07 5 Model 149 Press fittings Product 3 group 90 degree Angles EAN 90 04174 Order number Item 14 x 2 10050 5 P 7114 00 150 16 x 2 10060 4 P 7116 00 150 18 x 2 10080 2 P 7118 00 100 20 x 2 10900 1 P 7120 00 80 20 x 2 - 10 x 1.3 10020 8 P 7110 00 10 26 x 3 10130 4 P 7126 00 30 32 x 3 10140 3 P 7132 00 25 40 x 3.5 10150 2 P 7140 00 30 50 x 4 10160 1 P 7150 00 10 63 x 4.5 10170 1 P 7163 00 10 26 x 3 11280 5 P 7126 01 50 32 x 3 11290 4 P 7132 01 30 40 x 3.5 11300 0 P 7140 01 5 50 x 4 11310 9 P 7150 01 24 63 x 4.5 11320 8 P 7163 01 10 Model 45 degree Angle 150 Press fittings Product 3 group Angle Screw Connection Model EAN 90 04174 Order number Item 16 x 2 - 1/2 AG 11330 7 P 7116 71 80 18 x 2 - 1/2 AG 11340 6 P 7118 71 80 20 x 2 - 1/2 AG 11350 5 P 7120 71 60 20 x 2 - 3/4 AG 11360 4 P 7120 72 50 26 x 3 - 1 AG 11370 3 P 7126 73 40 32 x 3 - 1¼ AG 11380 2 P 7132 74 30 16 x 2 - 1/2 IG 11390 1 P 7116 81 80 16 x 2 - 1/2 IG 11400 7 P 7118 81 80 20 x 2 - 1/2 IG 11410 6 P 7120 81 60 20 x 2 - 3/4 IG 11420 5 P 7120 82 50 26 x 3 - 1 IG 11430 4 P 7126 83 40 32 x 3 - 1¼ IG 11440 3 P 7132 84 30 Dim. Angle screw connection with male thread Angle screw connection with female thread 151 Press fittings Product 3 group Press Coupling Model Press screw connection With male thread and flat seal. Press screw connection With female thread and flat seal. Coupling for press screw connection with flat seal. 152 Dim. EAN 90 04174 Order number Item 16 x 2 - 1/2 AG 15010 4 P 7016 61 100 18 x 2 - 1/2 AG 15030 2 P 7018 61 100 20 x 2 - 1/2 AG 15050 0 P 7020 61 80 16 x 2 - 3/4 AG 15020 3 P 7016 62 80 18 x 2 - 3/4 AG 15040 1 P 7018 62 80 20 x 2 - 3/4 AG 15060 9 P 7020 62 70 26 x 3 - 3/4 AG 15130 9 P 7026 62 50 26 x 3 - 1 AG 15140 8 P 7026 63 50 32 x 3 - 1 AG 15150 7 P 7032 63 40 40 x 3.5 - 1¼ AG 15160 6 P 7040 64 20 50 x 4 - 1½ AG 15170 5 P 7050 65 10 63 x 4.5 - 2 AG 15180 4 P 7063 66 8 16 x 2 - 1/2 IG 15190 3 P 7016 71 100 18 x 2 - 1/2 IG 15210 8 P 7018 71 100 20 x 2 - 1/2 IG 15230 6 P 7020 71 80 16 x 2 - 3/4 IG 15200 9 P 7016 72 80 18 x 2 - 3/4 IG 15220 7 P 7018 72 80 20 x 2 - 3/4 IG 15240 5 P 7020 72 70 26 x 3 - 3/4 IG 15310 5 P 7026 72 50 26 x 3 - 1 IG 15320 4 P 7026 73 50 32 x 3 - 1 IG 15330 3 P 7032 73 40 40 x 3.5 - 1¼ IG 15340 2 P 7040 74 20 50 x 4 - 1½ IG 15350 1 P 7050 75 10 63 x 4.5 - 2 IG 15360 0 P 7063 76 8 16 x 2 - 3/4 14660 2 P 7016 51 70 18 x 2 - 3/4 14670 1 P 7018 51 70 20 x 2 - 3/4 14680 0 P 7020 51 70 26 x 3 - 1 14720 3 P 7026 52 50 32 x 3 - 1¼ 14730 2 P 7032 53 30 40 x 3.5 - 1¼ 14740 1 P 7040 53 20 50 x 4 - 2 14750 0 P 7050 55 10 63 x 4.5 - 2½ 14760 9 P 7063 56 2 Press fittings Product 3 group Junction, male & female thread EAN 90 04174 Order number Item 14 x 2 - R 1/2 14200 0 P 7014 11 200 16 x 2 - R 1/2 14210 9 P 7016 11 150 18 x 2 - R 1/2 14230 7 P 7018 11 150 20 x 2 - R 1/2 14250 5 P 7020 11 150 18 x 2 - R 3/4 14240 6 P 7018 12 150 20 x 2 - R 3/4 14260 4 P 7020 12 150 26 x 3 - R 3/4 14330 4 P 7026 12 100 26 x 3 - R 1 14340 3 P 7026 13 80 32 x 3 - R 1 14350 2 P 7032 13 70 40 x 3.5 - R 1 14370 0 P 7040 13 30 32 x 3 - R 1¼ 14360 1 P 7032 14 50 40 x 3.5 - R 1¼ 14380 9 P 7040 14 30 50 x 4 - R 1¼ 14390 8 P 7050 14 24 50 x 4 - R 1½ 14400 4 P 7050 15 20 63 x 4.5 - R 2 14410 3 P 7063 16 14 63 x 4.5 - R 2½ 14420 2 P 7063 17 2 14 x 2 - Rp 1/2 14430 1 P 7014 21 200 16 x 2 - Rp 1/2 14400 0 P 7016 21 150 18 x 2 - Rp 1/2 14460 8 P 7018 21 150 20 x 2 - Rp 1/2 14480 6 P 7020 21 150 18 x 2 - Rp 3/4 14470 7 P 7018 22 150 20 x 2 - Rp 3/4 14490 5 P 7020 22 100 26 x 3 - Rp 3/4 14560 5 P 7026 22 100 26 x 3 - Rp 1 14570 4 P 7026 23 70 32 x 3 - Rp 1 14580 3 P 7032 23 50 40 x 3.5 - Rp 1 14600 8 P 7040 23 30 32 x 3 - Rp 1¼ 14590 2 P 7032 24 30 40 x 3.5 - Rp 1¼ 14610 7 P 7040 24 30 50 x 4 - Rp 1¼ 14620 6 P 7050 24 20 50 x 4 - Rp 1½ 14630 5 P 7050 25 16 63 x 4.5 - Rp 2 14640 4 P 7063 26 14 63 x 4.5 - Rp 2½ 14650 3 P 7063 27 8 Model 153 Press fittings Product 3 group T-Pieces with central male thread EAN 90 04174 Order number Item 16 x 2 - 1/2 - 16 x 2 11450 2 P 7216 51 60 18 x 2 - 1/2 - 18 x 2 11460 1 P 7218 51 50 20 x 2 - 1/2 - 20 x 2 11470 0 P 7220 51 50 26 x 3 - 1/2 - 26 x 3 11570 7 P 7226 51 30 20 x 2 - 3/4 - 20 x 2 11480 9 P 7220 52 50 26 x 3 - 3/4 - 26 x 3 11580 6 P 7226 52 30 32 x 3 - 3/4 - 32 x 3 11600 1 P 7232 51 30 26 x 3 - 1 - 26 x 3 11590 5 P 7226 53 30 32 x 3 - 1 - 32 x 3 11610 0 P 7232 52 25 40 x 3.5 - 1 - 40 x 3.5 11620 9 P 7240 52 15 40 x 3.5 - 1¼ - 40 x 3.5 11630 8 P 7240 53 15 50 x 4 - 1¼ - 50 x 4 11640 7 P 7250 53 10 50 x 4 - 1½ - 50 x 4 11650 6 P 7250 54 10 63 x 4.5 - 1½ - 63 x 4.5 11660 5 P 7263 54 2 63 x 4.5 - 2 - 63 x 4.5 11670 4 P 7263 55 8 16 x 2 - 1/2 - 16 x 2 11680 3 P 7216 41 60 18 x 2 - 1/2 - 18 x 2 11690 2 P 7218 41 50 20 x 2 - 1/2 - 20 x 2 11700 8 P 7220 41 50 26 x 3 - 1/2 - 20 x 2 11810 4 P 7226 42 30 26 x 3 - 1/2 - 26 x 3 11800 5 P 7226 41 30 32 x 3 - 1/2 - 32 x 3 11840 1 P 7232 43 30 20 x 2 - 3/4 - 20 x 2 11710 7 P 7220 42 50 26 x 3 - 3/4 - 26 x 3 11830 2 P 7226 44 30 32 x 3 - 3/4 - 32 x 3 11850 0 P 7232 41 30 32 x 3 - 1 - 32 x 3 11860 9 P 7232 42 25 40 x 3.5 - 1 - 40 x 3.5 11880 7 P 7240 41 20 32 x 3 - 1¼ - 32 x 3 11870 8 P 7232 44 20 40 x 3.5 - 1¼ - 40 x 3.5 11890 6 P 7240 42 20 50 x 4 - 1¼ - 50 x 4 11900 2 P 7250 42 10 50 x 4 - 1½ - 50 x 4 11910 1 P 7250 43 10 63 x 4.5 - 1½ - 63 x 4.5 11920 0 P 7263 43 2 63 x 4.5 - 2 - 63 x 4.5 11930 9 P 7263 44 8 Model T-Pieces with central female thread 154 Press fittings Product 3 group Junction, Angle EAN 90 04174 Order number Item 14 x 2 - R 1/2 10690 3 P 7114 11 150 16 x 2 - R 1/2 10700 9 P 7116 11 150 18 x 2 - R 1/2 10710 8 P 7118 11 150 20 x 2 - R 1/2 10720 7 P 7120 11 120 20 x 2 - R 3/4 10730 6 P 7120 12 100 26 x 3 - R 3/4 10780 1 P 7126 12 50 32 x 3 - R 1 10790 0 P 7132 13 30 40 x 3.5 - R 1¼ 10800 6 P 7140 14 30 50 x 4 - R 1¼ 10810 5 P 7150 14 20 63 x 4.5 - R 2 10830 3 P 7163 16 10 14 x 2 - Rp 1/2 10840 2 P 7114 21 120 16 x 2 - Rp 1/2 10850 1 P 7116 21 120 18 x 2 - Rp 1/2 10860 0 P 7118 21 120 20 x 2 - Rp 1/2 10870 9 P 7120 21 100 20 x 2 - Rp 3/4 10880 8 P 7120 22 50 26 x 3 - Rp 3/4 10930 0 P 7126 22 50 32 x 3 - Rp 1 10940 9 P 7132 23 30 40 x 35 - Rp 1 1/4 10950 8 P 7140 24 30 50 x 4 - Rp 1¼ 10960 7 P 7150 24 16 50 x 4 - Rp 1½ 10970 6 P 7150 25 16 63 x 4.5 - Rp 2 10980 5 P 7163 26 10 Model 155 Press fittings Product 3 group Non crossing T-piece EAN 90 04174 Order number Item 16 x 2 17110 9 P 7216 25 20 20 x 2 17130 7 P 7220 25 20 20 x 2 - 16 x 2 - 16 x 2 17160 4 P 7220 27 20 20 x 2 - 16 x 2 - 20 x 2 17150 5 P 7220 26 20 20 x 2 - 20 x 2 - 16 x 2 17170 3 P 7220 28 20 Box for non crossing T-piece (Styropore) 16870 3 P 1020 22 1 Non crossing T-piece, 6 x connection female thread Rp 1/2 for pipe connection adapter (14–26) 1 6266 01 or P 7016 18, have to be ordered separately. 15370 9 P 7200 31 2 10 x 1.3 - G 1/2 99936 9 P 7010 18 150 14 x 2 - G 1/2 15380 8 P 7014 18 150 16 x 2 - G 1/2 15390 7 P 7016 18 150 18 x 2 - G 1/2 15400 3 P 7018 18 150 20 x 2 - G 1/2 15410 2 P 7020 18 150 26 x 3 - G 1/2 15450 8 P 7026 18 100 15460 7 P 1020 21 5 Model Screw in device R 1/2, with O-Ring seal, for non crossing T-piece. Box for non crossing T-piece, internal thread 1/2 (Plastic) 156 Plastic Pipe Conections Product 1 group Plastic Pipe Conections G 3/4 for PE-X, PB and Aluminium Composite Pipes Model Plastic pipe connections 3/4 For PE-X, PB and aluminium composite pipes, consisting of spiggot, olive and union nut G 3/4. With cone. Dim. EAN 90 04174 Order number Item 10 x 1.3 66330 7 1 6098 18 10 14 x 2 61520 7 1 6098 02 10 15 x 2.5 66250 8 1 6098 16 10 16 x 2 61530 6 1 6098 03 10 16 x 2.2 63290 7 1 6098 12 10 16 x 2.7 66340 6 1 6098 27 100 17 x 2 61540 5 1 6098 04 10 17 x 2.5 61550 4 1 6098 05 10 18 x 2 61570 2 1 6098 07 10 18 x 2.5 61560 3 1 6098 06 10 18 x 3 - 1 6098 17 100 20 x 2 61580 1 1 6098 08 10 20 x 3.5 62710 1 1 6098 10 10 20 x 2.5 63160 3 1 6098 11 10 20 x 3.4 - 1 6098 19 100 Plastic Pipe Connections M 22 x 1,5 for PE-X, PB and Aluminium Composite Pipes Plastic pipe connections M 22 x 1.5 For PE-X, PB and aluminium composite pipes, consisting of spiggot, olive and union M 22 x 1.5. 14 x 2 61480 4 1 6066 02 10 16 x 2 61490 3 1 6066 03 10 17 x 2 61500 9 1 6066 04 10 Plastic Pipe Connections G 1/2 For PE-X, PB and Aluminium Composite Pipes HERZ-Compression adapter for plastic pipe connections, consisting of compression nut and olive, compression adapter R 1/2, suitable for HERZ-Valves of series “D”, TS-7728, DE LUXE and RL5 Plastic pipe connection G 1/2 with double O-Ring and insulating disc, consisting of spiggot, and olive and union nut G 1/2 with cone. 14 x 2 65600 2 1 6092 02 10 16 x 2 65590 6 1 6092 01 10 12 x 2 16260 2 1 6092 11 10 14 x 2 16270 1 1 6092 12 10 16 x 2 16280 0 1 6092 13 10 Plastic Pipe Connections G1 For PE-X, PB and Aluminium Composite Pipes Plastic pipe connections G 1 For PE-X, PB and aluminium composite pipes, consisting of spiggot, olive and union nut G 1 with cone. 16 x 2 16290 9 1 6198 11 10 20 x 2 16300 5 1 6198 12 10 25 x 3.5 64710 9 1 6198 00 10 26 x 3 64720 8 1 6198 01 10 157 Compression Adapters Product 1 group HERZ-Compression Adapters G 3/4 for Steel and Copper Pipes Order number 1 6274 18 1 6274 00 1 6274 01 1 6274 02 1 6274 03 1 6274 04 1 6276 12 1 6276 14 1 6276 15 1 6276 16 1 6276 18 Item 8 10 12 14 15 16 12 14 15 16 18 EAN 90 04174 63340 9 60530 7 60540 6 60550 5 60560 4 60570 3 64740 6 66270 6 64750 5 66280 5 64760 4 Compression adapter, metal-to-metal joint Olive, metal-to-metal joint towards pipe, locking nut M 22 x 1.5. Not suitable for chromium-plated metal and stainless steel pipes. 10 12 14 15 16 60590 1 60600 7 60610 6 60620 5 60630 4 1 6284 00 1 6284 01 1 6284 03 1 6284 04 1 6284 05 10 10 10 10 10 Compression adapter with soft seal Olive, rubber joint (EPDM) towards pipe, locking nut M 22 x 1.5. 12 64770 3 1 6286 12 10 14 60590 1 1 6286 14 10 15 64780 2 1 6286 15 10 3/8 x 12 1/2 x 12 1/2 x 14 1/2 x 15 3/4 x 18 60650 2 63780 3 63430 7 60660 1 60670 0 1 6292 00 1 6292 12* 1 6292 14* 1 6292 01 1 6292 02 10 10 10 10 10 15 x 1 - G 1/2 15790 5 1 6294 01 10 Model Dim. Compression adapter, metal-to-metal joint Olive with O-Ring installed, metal-to-metal joint towards pipe, locking nut G 3/4. Not suitable for chromium-plated metal and stainless steel pipes. Compression adapter with soft seal Olive, rubber joint (EPDM) towards pipe, locking nut G 3/4. HERZ-Compression Adapters 10 10 10 10 10 10 10 10 10 10 10 M 22 x 1,5 for Steel and Copper Pipes HERZ-Compression Adapters G 1/2 for Steel and Copper Pipes Compression adapter, metal-to-metal joint Olive, metal-to-metal joint towards pipe, olive screw. Compression adapter, metal-to-metal joint, Olive, metal-to-metal joint towards pipe, locking nut G 1/2. HERZ-Compression Adapters G1 for Steel and Copper Pipes Compression adapter, metal-to-metal joint Olive, metal-to-metal joint towards pipe, locking nut G 1 with cone. 22 64730 7 1 6273 01 10 G 3/4-15 mm 66470 0 1 6274 21 10 x 10 G 1-22 mm 66480 9 1 6274 22 10 x 10 G 1¼-28 mm 66490 8 1 6274 23 20 G 1½-35 mm 66500 4 1 6274 24 5 HERZ-Nut & Olive Compression nut & olive set for Herz ball valve 2190 G 1¾-42 mm 66510 3 1 6274 25 5 G 23⁄8 -54 mm 66520 2 1 6274 26 5 10 x 1 12 x 1 14 x 1 15 x 1 16 x 1 18 x 1 22 x 1 00150 5 00160 4 00170 3 00180 2 00190 1 00200 7 02310 1 1 0674 10 1 0674 12 1 0674 14 1 0674 15 1 0674 16 1 0674 18 1 0674 22 20 20 20 20 20 20 20 Accessories Support sleeves For pipe dimensions. 158 Compression Adapters Product 1 group HERZ-Compression Adapters for Universal Models “DE LUXE” Model HERZ-Compression adapter cover “DE LUXE” for compression adapters. Colour EAN 90 04174 Order number Item Chrome 63200 6 1 6292 41 20 White (RAL 9010) 63230 3 1 6292 44 20 Matt black 63270 9 1 6292 49 20 HERZ-Compression Adapters for Universal Models “DE LUXE” in Sanitary Colours HERZ-Compression adapter cover “DE LUXE” for compression adapters. Pergamum 63630 1 S 6292 01 20 Aeg 63640 0 S 6292 02 20 Manhattan 63650 9 S 6292 03 20 Edelweiss 63660 8 S 6292 04 20 Calypso 63670 7 S 6292 05 20 Bahama beige 63680 6 S 6292 06 20 Greenwich 63690 5 S 6292 07 20 Jasmine 63700 1 S 6292 08 20 Natural 63710 0 S 6292 09 20 Ultramarine blue (RAL 5002) 63720 9 S 6292 10 20 Flame red (RAL 3000) 63730 8 S 6292 11 20 Ruby red (RAL 3003) 63740 7 S 6292 12 20 Signal blue (RAL 5005) 63750 6 S 6292 13 20 Golden yellow (RAL 1004) 63760 5 S 6292 14 20 Light ivory (RAL 1015) 63770 4 S 6292 15 20 Chrome 63860 2 1 6281 41 20 White (RAL 9010) 63890 9 1 6281 44 20 Matt black 63900 5 1 6281 49 20 HERZ-Compression Adapter Cover “DE LUXE” HERZ-Compression adapter cover “DE LUXE” for compression adapters. HERZ-Compression Adapter Cover “DE LUXE” in Sanitary Colours HERZ-Compression adapter cover “DE LUXE” for compression adapters. Pergamum 65620 0 S 6281 21 20 Aeg 65630 9 S 6281 22 20 Manhattan 65640 8 S 6281 23 20 Edelweiss 65650 7 S 6281 24 20 Calypso 65660 6 S 6281 25 20 Bahama beige 65670 5 S 6281 26 20 Greenwich 65680 4 S 6281 27 20 Jasmine 65690 3 S 6281 28 20 Natura 65700 9 S 6281 29 20 Ultramarine blue (RAL 5002) 65710 8 S 6281 30 20 Flame red (RAL 3000) 65720 7 S 6281 31 20 Ruby red (RAL 3003) 65730 6 S 6281 32 20 Signal blue (RAL 5005) 65740 5 S 6281 33 20 Golden yellow (RAL 1004) 65750 4 S 6281 34 20 Light ivory (RAL 1015) 65760 3 S 6281 35 20 159 Adapter Product 1 group Adapter Dim. EAN 90 04174 Order number Item G 1/2 60470 6 1 6262 01 20 G 3/4 60510 9 1 6262 02 20 G1 16550 4 1 6262 03 10 G 1/2 x M 22 x 1.5 60500 0 1 6272 01 10 G 1/2 x G 3/4 60490 4 1 6266 01 100 G 1/2 x R 1/2 16630 3 1 6266 11 10 G 3/4 x R 1/2 16640 2 1 6266 12 10 G 3/4 x R 3/4 16650 1 1 6266 20 10 G 1 x R 3/4 16660 0 1 6266 13 10 G1 x Rc1 64700 0 1 6266 03 10 G 3/4 x Rp 1/2 60480 5 1 6265 01 10 G 1/2 x Rp 1/2 16590 0 1 6265 11 10 G 3/4 x Rp 3/4 16600 6 1 6265 12 10 G 1 x Rp 3/4 16610 5 1 6265 13 10 G 1 x Rp 1 16620 4 1 6265 14 10 1/2 x M 22 x 1.5 63260 0 1 6275 22 20 Junction sockets For the connection of threaded pipes. 1 pair of sockets for O-Ring seal, including O-Ring. G 3/4 80940 8 1 8447 02 1 Double nipple For the connection of compression adapters for copper and plastic pipes, 1 pair. G 3/4 80950 7 1 8448 02 20 Model Adapter For connection of plastic pipes. Compression adapter set G 3/4 with cone and for pipe connection has to be ordered separately. Adapter For universal and Y-valves. Compression adapters for pipe connection have to be ordered separately. Adapter made of brass, nickel-plated with female thread for direct distributor connection, with cone seal. 160 Fittings Product 3 group Elbows Model Dimension EAN 90 04174 Order number Item G 1/2 16510 8 P 3124 18 200 G 3/4 16520 7 P 3126 03 100 G1 16530 6 P 3128 09 50 G 1/2 x R 1/2 16460 6 P 3124 17 200 G 3/4 x R 1/2 16470 5 P 3126 02 120 G 3/4 x R 3/4 16480 4 P 3126 06 100 G 1 x R 3/4 16490 3 P 3128 07 80 G1xR1 16500 9 P 3128 08 50 G 1/2 x Rp 1/2 16410 1 P 3124 16 200 G 3/4 x Rp 1/2 16430 9 P 3126 16 120 G 3/4 x Rp 3/4 16420 0 P 3126 05 100 G 1 x Rp 3/4 16440 8 P 3128 05 80 G 1 x Rp 1 16450 7 P 3128 06 10 G 1/2 16560 3 P 3124 19 150 G 3/4 16570 2 P 3126 08 100 G1 16580 1 P 3128 15 50 G 1/2 x Rp 1/2 x G 1/2 16310 4 P 3124 15 150 G 3/4 x Rp 1/2 x G 3/4 16320 3 P 3126 07 100 G 3/4 x Rp 3/4 x G 3/4 16330 2 P 3126 13 100 G 1 x Rp 1/2 x G 1 16340 1 P 3128 01 50 G 1 x Rp 3/4 x G 1 16350 0 P 3128 03 50 G 1 x Rp 1 x G 1 16360 9 P 3128 04 50 G 1/2 x R 1/2 x G 1/2 16370 8 P 3124 20 150 G 3/4 x R 3/4 x G 3/4 16380 7 P 3126 17 100 G 1 x R 3/4 x G 1 16390 6 P 3128 16 50 G1xR1xG1 16400 2 P 3128 17 50 T-piece 161 Fittings Product 1 group Reducer Model Dimension EAN 90 04174 Order number Item G 1 x Rp 1/2 16790 4 P 1928 12 10 - 1 2333 01 10 3/8 16720 1 1 8445 30 10 1/2 16730 0 1 8445 31 10 3/4 16740 9 1 8445 32 10 1 16750 8 1 8445 33 10 G 1/2 16760 7 1 8525 11 10 G 3/4 16770 6 1 8525 12 10 G1 16780 5 1 8525 13 10 G 1¼ 20690 0 1 8525 63 20 G 1½ 20700 6 1 8525 64 20 G2 20710 5 1 8525 74 20 G 2¼ 20720 4 1 8525 75 20 G 2¾ 20730 3 1 8525 76 20 M 22 x 1.5 10030 7 1 1056 66 20 Plug, nickel-plated 3/4, with connection nipple for chain. 80660 5 1 8525 52 20 Plug, brass version 3/4, with connection nipple for chain. 80190 7 1 8525 02 1 G1 81930 8 1 8545 03 1 End caps with O-Ring seal 1 Pair for compact distributor 8441. G 3/4 80930 9 1 8445 02 1 HERZ-Compensation Adapter 1/2 For compensation of different radiator pipe lengths, 2 pieces, to be cut into length, centre distance 35–70 mm. 1/2 32590 8 1 3010 11 20 HERZ-spacing adaptor 1/2 compensation for adapter 1 3010 11 To compensate for different lengths for Adapter assembly.Thread length 65 mm, lengths 35-65 mm. 1/2 32600 4 1 3011 11 20 R 1/2 x 3/8 Brass, nickel plated, with O-ring, Temperature range -10 °C to 110 (water 0 °C to 110 °C). Spare Parts End caps with O-Ring seal 1 pair for 8541. Adaptor 162 Accessories Product 3 group Plug fitting Model plug fitting Dim. EAN 90 04174 Order number Item 14 x 2 13850 8 P 7014 10 200 16 x 2 13860 7 P 7016 10 200 18 x 2 13880 5 P 7018 10 200 20 x 2 13890 4 P 7020 10 200 26 x 3 13920 8 P 7026 10 100 32 x 3 13930 7 P 7032 10 80 40 x 3.5 13940 6 P 7040 10 10 50 x 4 13950 5 P 7050 10 30 63 x 4.5 13960 4 P 7063 10 20 Rp 1/2 10340 7 P 0450 04 10 1/2 10280 6 P 0450 01 40 3/4 10290 5 P 0450 02 40 Rp 1/2 10440 4 P 0450 03 30 Soundproofing element for double-wall angle Soundproofing element for double-wall angle Soundproofing element wall angle shot Soundproofing element for wall angle short 163 Tools for Press Fittings Product 1 3 group Tubing cutter EAN 90 04174 Order number Item Suitable for dimensions 10 to 40 (REMS Reference article number: 290050) 16140 7 P 2010 11 1 Suitable for dimensions 10 to 63 (REMS Reference article number: 290000) 16150 6 P 2010 16 1 Replacement blades for tube cutter for dimensions 10 to 40 and 10 to 63 (REMS-Reference Model: 290016) 17040 9 P 2010 01 10 Suitable for dimensions 14 to 35 16160 5 P 2010 14 1 Suitable for dimensions 35 to 50 17080 5 P 2010 17 1 Replacement blades for tube cutter for dimensions 14 to 35 17030 0 P 2010 15 10 Replacement blades for tube cutter for dimensions 35 to 50 17090 4 P 2010 18 10 Pipe cutter Simple pipe cutter for cutting plastic pipes, Metal composite pipes, tubes WIROFlex and all kind of Plastic or rubber hoses 10911 9 P 2010 19 1 inside 14 x 2 16220 6 P 2021 41 1 inside 16 x 2 16170 4 P 2021 61 1 inside 18 x 2 16230 5 P 2021 81 1 inside 20 x 2 16180 3 P 2022 01 1 inside 26 x 3 16190 2 P 2022 61 1 outside 14 16240 4 P 2021 42 1 outside 16 16200 8 P 2021 62 1 outside 18 16250 3 P 2021 82 1 outside 20 16210 7 P 2022 02 1 outside 26 16220 6 P 2022 62 1 Model Bending Spring 164 Tools for Press Fittings Product 3 group Universal calibrator, with standard handle, mounted Dim. EAN 90 04174 Order number Item 10 x 1.3 99911 6 3 F010 11 1 14 x 2 19890 8 P 2011 73 1 16 x 2 19900 4 P 2011 74 1 18 x 2 19910 3 P 2011 75 1 20 x 2 19920 2 P 2011 76 1 26 x 3 19930 1 P 2011 78 1 32 x 3 19940 0 P 2011 79 1 40 x 3.5 19950 9 P 2011 80 1 50 x 4 19970 7 P 2011 83 1 63 x 4.5 20010 6 P 2011 87 1 14 x 2 16910 6 P 2010 73 1 16 x 2 16920 5 P 2010 74 1 18 x 2 16930 4 P 2010 75 1 20 x 2 16940 3 P 2010 76 1 26 x 3 16950 2 P 2010 78 1 32 x 3 16960 1 P 2010 79 1 40 x 3.5 16970 0 P 2010 80 1 50 x 4 16990 8 P 2010 83 1 63 x 4.5 19880 9 P 2010 87 1 Click Grip for universal calibrator all dimensions 16890 1 P 2010 70 1 Standard handle for calibrating all dimensions 16900 7 P 2010 71 1 16 x 2 - P 2016 20 1 18 x 2 - P 2018 20 1 20 x 2 - P 2020 20 1 26 x 2 - P 2026 20 1 32 x 2 - P 2032 20 1 40 x 2 - P 2040 20 1 50 x 2 - P 2050 20 1 63 x 2 - P 2063 20 1 Model Calibrator Universal calibrator, used with standard- and click- or directly handle for clamping onto cordless screwdriver Calibrator with 6-kant Handles PipeFix unpressed leak path calibrator* Unpressed leak path calibrator* 165 Tools for Press Fittings Product 3 group Pressing aids and batteries EAN 90 04174 Order number Universal Press electric device to Preparation of press joints to 63 mm incl case of stable plate 230 V, 50 Hz 15850 6 P 2010 09 REMS 577011 1 Universal battery pressing device to Preparation of press joints to 63 mmincl case of stable plate, L-Ion Battery 15810 0 P 2010 08 REMS 571013 1 Universal battery pressing device 15840 7 P 2010 10 REMS 571003 1 Steel case with insert. The case comes without content. (REMS Reference Item number: 570 280) 15830 8 P 2010 00 REMS 570280 1 Battery Ni-Cd 12 V, 2.0 Ah, no memory effect (REMS-Reference Model: 571510) + Li-Ion 14.4 V, 2.2 Ah 15980 0 P 2010 13 REMS 571510 1 Quick Charger Li-lon/Ni-Cd 23 V (REMS-Reference Model 571560) 15970 1 P 2010 12 REMS 571560 1 Model 166 Referenceorder number VKE Tools for Press Fittings Product 3 group Press jaw (TH) to pressing machine (battery, 230 V) Dim. EAN 90 04174 Order number Reference Order No. VKE 10 20650 4 P 2011 19 REMS 570467 1 14 15860 5 P 2011 21 REMS 570455 1 16 15870 4 P 2011 22 REMS 570460 1 18 15890 2 P 2011 23 REMS 570465 1 20 15900 8 P 2011 24 REMS 570470 1 26 15920 6 P 2011 26 REMS 570475 1 32 15930 5 P 2011 27 REMS 570480 1 40 15940 4 P 2011 28 REMS 570485 1 50 15950 3 P 2011 29 REMS 572400 1 63 15960 2 P 2011 30 REMS 572405 1 Steel case for six Press jaw and a pipes cutter. The case comes without content. (REMS Reference article number: 570 295). 15830 8 P 2011 00 REMS 570295 1 Battery press tool 9.6 V (Mini), including a plastic case, Charger and battery for pressures up Diameter 32 mm. 10451 0 P 2010 27 Klauke MAP1 1 Spare battery press for tool 9.6 V. 10461 9 P 2010 28 Klauke RAM2 1 Replacement battery charger for battery press tool 9.6 V. 10471 8 P 2010 29 Klauke LG4F 1 Model Pressing jaw to pressing machine Batteries 167 Press Tools for Fittings Product 3 group Press jaw (TH) to pressing machine Dim. EAN 90 04174 Order number Reference Order No. Klauke Item 14 10491 6 P 2010 30 SBM14N 1 16 10501 2 P 2010 31 SBM16N 1 18 10511 1 P 2010 32 SBM18N 1 20 10521 0 P 2010 33 SBM20N 1 26 10531 9 P 2010 34 SBM26N 1 32 10541 8 P 2010 35 SBM32N 1 crimping pliers / wrench press Manual 15990 9 P 2010 20 MP32N 1 insert 14 16000 4 P 2010 21 WE14N 1 insert 16 16010 3 P 2010 22 WE16N 1 insert 18 16020 2 P 2010 23 WE18N 1 insert 20 16030 1 P 2010 24 WE20N 1 insert 26 16040 0 P 2010 25 WE26N 1 insert 32 16050 9 P 2010 26 WE32N 1 EAN 90 04174 Order number Reference Order No. Item 17070 6 P 2010 05 REMS 574000 1 Model Press jaw (TH) to pressing machine 9.6, marked with Nominal size, production week, burnished surface Hand press tool Hand-lever for all Press jaw Model Lever suitable for all Press jaw pressing units, Dimension 10–26. The Press jaw must be ordered separately. 168 Spare parts Product 3 group Spare parts Model O-ring EPDM for NW Press sleeve of stainless steel. Dim. EAN 90 04174 Order number Item 14 x 2 13720 4 P 0181 14 100 16 x 2 13730 3 P 0181 16 100 18 x 2 13750 1 P 0181 18 100 20 x 2 13760 0 P 0181 20 100 26 x 3 13800 3 P 0181 26 100 32 x 3 13810 2 P 0181 32 100 40 x 3.5 13820 1 P 0181 40 100 50 x 4 13830 0 P 0181 50 100 63 x 4.5 13840 9 P 0181 63 100 14 13600 9 P 0441 47 200 16 13610 8 P 0441 67 200 18 13630 6 P 0441 87 200 20 13640 5 P 0442 07 200 26 13670 2 P 0442 67 100 32 13680 1 P 0443 27 80 40 13690 0 P 0444 07 60 50 13700 6 P 0445 07 50 63 13710 5 P 0446 37 40 169 Certificate of Guarantee 1. Definition of Terms and Scope of Validity 1.1. In order to be entitled to claim services under the present Certificate of Guarantee, the claiming party must hold a trade licence for the installation of low-pressure central heating systems and hot water preparation plants of the upper and lower categories or a trade licence for gas fitters and plumbers. 1.2. Under the present Certificate of Guarantee „Products” shall designate all heating components manufactured by us after January 1st, 2007, bought new by the party entitled to raise a claim either directly from us or directly from one of our authorized dealers in Austria, unless these components have been exempted from the validity of the Certificate of Guarantee by express declaration to the party entitled to raise a claim or are generally exempted from such guarantee. There are special provisions for electronic and electric products such as HERZElectronic thermostats and actuating drives, HERZ-Actuating drives, HERZ-Room temperature controllers, HERZ transformers and wireless control systems and devices, which are not covered by the Certificate of Guarantee. Furthermore, wear parts of HERZ components such as seals are not covered by the present Certificate of Guarantee. 1.3. A case of damage in the sense of the Certificate of Guarantee occurs when a customer of a party entitled to raise claims with HERZ raises a warranty claim against the said party for any damage caused by an error in design or a defect in manufacturing or materials of the products. 1.4. The geographic validity of the Certificate of Guarantee shall be limited to places within Europe. 2. Extend of Services rendered under the Certificate of Guarantee We shall render the following services under the present Certificate of Guarantee (excluding any further claims): 2.1. Replacement free of charge of the products or product components required repairing the damage, free place of damage. 2.2. According to our choice: a) performing the required dismantling /disassembly and assembly/ installation of products or product components or b) repairing the initial products or product components or c) paying the costs fort he services as mentioned above. 2.3. Repairing the immediate material damage caused by the defective products or paying the costs for the services as mentioned above. 2.4. Damages for direct personal injury caused by the defective products. 2.5. Our liability according 2.1. to 2.3. is limited to € 500,000 per claim. 2.6. Without prejudice to the provisions of item 4.1. our liability shall be limited in terms of time to claims arising within a period of 5 years after manufacturing of the products causing the damage. 170 2.7. Our liability is limited to claims arising out of errors in design, defects in manufacturing or materials of the products and based on the absence of characteristics which have either been guaranteed by us or which can be expected in accordance with the state of technology or with trade practice. 3. Obligations of the Party Entitled to Raise Claims It is a condition precedent for the implementation of the present Certificate of Guarantee that the party entitled to raise claims meet the below mentioned obligations. Failure to meet any or several of these obligations shall relieve HERZ of any and all obligations under the present Guarantee. 3.1. During installation and use of the products it is imperative to observe our instructions for installation and maintenance valid at the moment of installation and laid down in the brochures, standard sheets, as well as our information regarding the scope of application of the products. Furthermore, it is imperative to proceed with due care according to the state of technology, particularly during maintenance. 3.2. As soon as the party entitled to raise a claim detects or learns of a case of damage, it shall forthwith inform HERZ of such damage (not later than on the 3rd working day thereafter) by fax, telex or cable and shall make available to us all information requested by us. The information shall be submitted in writing upon our request. 3.3. The party entitled to raise a claim shall make sure that the representatives of our company and the agents of our insurance company be granted access to the place of damage immediately after giving notice of the claim and shall take all appropriate measures to determine the cause and scope of the damage. In particular, the party entitled to raise a claim shall keep and make available the products or product components which caused the damage. 3.4. The burden of proof lies with the party who suffered the damage. The party entitled to raise a claim shall not acknowledge any obligation to damages neither with regard to its basis nor to its extend, neither in its own name nor on our behalf. Any declaration extending the scope of damages offered by the present Certificate of Guarantee and by the applicable legal provisions made by the party entitled to raise a claim before or after the occurrence of damage, are not admitted and shall not be binding on us. 4. Period of Validity and Formal Provisions 4.1. The present Certificate of Guarantee shall cover claims for damage occurring between April 1st, 2007 and March 31st, 2012. We reserve the right to extend this period. 5. Place of Fulfilment, Jurisdiction, Applicable Law 5.1. The place of fulfilment shall be Vienna. The court having subject-matter jurisdiction for our company in Vienna shall have exclusive jurisdiction. Any disputes arising from the present Certificate of Guarantee shall be settled according to Austrian Law. The application of the UN-Convention on Contracts for the International Sale of Goods is expressly excluded. Vienna, April, 2011 Terms and Conditions of Sale, Delivery and Payment 1. Offers, Acknowledgement of Orders, Conclusion of Contracts 1.1. All offers are without obligation. We reserve the right to modify, supplement or discontinue our production at any time. We are entitled to accept only partial orders or to refuse them without giving a reason. 1.2. Our written acknowledgement of order constitutes a contract, an acknowledgement of order by faxsimile is sufficient also. The content of the acknowledgement of order shall at the same time be the content of the contract unless the customer raises an objection against it immediately after receipt. Otherwise, our acknowledgement of order and our Terms and Conditions of Sale, Delivery and Payment shall be deemed to have been accepted. In case of claim against the order confirmation, its content becomes a contract if the customer accepts the delivery and/or makes a payment. 1.3. After the acknowledgement of order has been sent, the order placed with us no longer can be changed or cancelled. 1.4. The present Terms and Conditions of Sale, Delivery and Payment shall supersede any purchasing conditions of our customers in any case. They also apply to any future business with the customer. 1.5. Prices are understood to be from the factory, unpackaged, carriage forward and without VAT. 1.6. In case of an increase in costs during the period between the acknowledgement of order and delivery, we shall be entitled to make the respective price adjustments. 1.7. In case that a component of a fitting ordered is not needed, the price deduction shall not be made according to the component price but according to our price calculation. 1.8. Declarations and announcements of HERZ towards our contract partners come into force with sending these declarations and announcements to the mailing address known to us. This is also valid if the mailing address has been changed and has not been announced immediately. 1.9. To be considered valid, changes and additions to the contract must be agreed and confirmed in writing by persons with representative status who are entered in the company register of our firm. Our other staff are not authorised to arrange changes or additional agreements. 2. Conditions of Payment 2.1. As long as nothing else is given in the order confirmation, payments are net cash at receipt of the invoice and without any discount. 2.2. In case of default payment we reserve the right to demand payment of default interest at a rate of 10% above the then current Austrian bank rate (per year), however not less than 1% per month. Only payments made to the payment entity specify in the invoice will be recognised. In case of bank transfers, payment shall be deemed to have been made only when the amount of the invoice has been irrevocably credited to our account. 2.3. Bills of exchange, cheques and payments by money order will be recognised only on account of payment. In this event a discount is not permitted even for special discount arrangements. 2.4. In case of payment by accepted bill or customer’s bill, the discount charges shall be borne by the debtor. 2.5. The date of the invoice shall be relevant for the date of payment in any case, even if goods are received with a delay for reasons not to be attributed to us. 2.6. In the event that payment is not made by the due date or in case of deteriorating financial soundness of the customer or on other important reasons, we shall be entitled at our discretion to repudiate the contract or to demand immediate payment of any and all debts irrespective of the term of payment agreed upon, all this without any claim for fulfilment or damages arising against us. 3. Retention of Title 3.1. The goods supplied by us shall remain our property until payment in full has been made for any and all goods supplied. This shall also apply to the payment of any bills of exchange accepted in payment by us. In the event of re-sale for cash, the re-sale proceeds from this separate retention by the customer come to us and oblige the customer to enter a valid note in the accounts (anticipated ownership). In the case of manufacturing our retention of title (proportionate) is the end product. The customer must inform their buyer at re-sale about the existing retention of title and all other security laws agreed. 3.2. The buyer must inform us immediately if third parties raise claims against our goods supplied under our retention of title or bring legal actions. Any costs resulting from legal consequences are to be borne by the buyer. 4. Packing and Dispatch 4.1. The goods will be packed to commercial standards at the buyer’s expense. Packing materials will not be taken back. The packing shall be dimensioned assuming customary transport conditions. 4.2. The goods will be dispatched ex-works at the risk of the buyer, even in case of delivery freight prepaid. 4.3. The seller shall be obliged to take out insurance only if and to the extent that this has been agreed upon in writing. 5. Modification of Models 5.1. We reserve the right to make design modifications, to change tolerances and to make improvements. 5.2. In case of special designs manufactured according to customer sample, model or drawing, we reserve the right to supply up to 5 % more or less than the quantity ordered. 6. Complaints 6.1. With regard to any defects or damage that can be recognised during proper inspection upon receipt, not recognizable defects or damages have to be reprehend immediately after their occurrence, a complaint shall be filed immediately after receipt of goods. However, any warranty claim shall expire three months after delivery. 6.2. In addition, in case of deviations in the number of units supplied or in weight, a complaint shall be filed with the railway company or the forwarding agent (carrier) upon receipt of the goods, and a certification to support any such difference shall be obtained. Any defective units shall be returned to us without delay freight prepaid. 7. Warranty 7.1. We will perform our warranty obligation by replacing free of charge any items which become totally inoperative within a period of three months as a result of defective materials or deficiencies in workmanship, provided that the rejected items are returned within 4 months from delivery. 8. Returned Goods 8.1. Returned goods will only be accepted with our prior written consent and only if sent free our works in Vienna without any damage or defect. 8.2. Return of items made to order will not be accepted in any case. 9. Default in Delivery and Release from the Delivery Commitment 9.1. The obligation to deliver and to adhere to the delivery period shall be suspended by any extraordinary events and circumstances not to be attributed to us which causes a relevant interruption of operations or makes the dispatch of goods impossible. 9.2. In the event that dispatching of goods is impossible, we shall be entitled to store any goods already manufactured at the expense and risk of the buyer. In that case, the goods will be invoiced to the buyer as if they had already been supplied. 9.3. If we are in default in delivery, the buyer shall grant a reasonable period of grace of not less than 6 weeks. The buyer shall not be entitled to cancel the contract after we have initiated production of the goods ordered – even after having granted a period of grace. 10. Quality of a Consignment 10.1. The quality of a consignment cannot be assessed on the basis of the quality of individual items. 11. Damages, Limitation of Warranty 11.1. The amount of any claims is limited according to the net invoice value of the item in question. 11.2. We are entitled to settle any guarantee claims through the provision of replacement parts. No claims can be made for price reductions. 11.3. We shall not recognise or reimburse any claims for damages with respect to installation costs, incipient processing costs, maintenance costs, etc. in any case. 11.4. Claims for damages by the customer are excluded, whatever the legal reasons, particularly due to delays, impossibility of attainment, positive breach of a claim, debts at conclusion of a contract, damage consequential to defects and defects due to improper handling, as long as they are intentional or do to gross negligence on our part. In the event of intent or gross negligence the customer must give proof of this. Information issued by us (installation and maintenance instructions, details of areas of use for products, etc.) must be strictly adhered to. Where instructions are disregarded or ignored, the official conditions release us from any liability. 11.5. We do not assume liability for any loss or damage resulting from improper handling or use, overstraining or natural wear. Furthermore, we do not assume liability with respect to any loss or damage caused by negligence nor any indirect or consequential loss. 11.6. Our liability for material damage due to a production fault according to the Product Liability Act (Produkthaftungsgesetz) shall be excluded for all companies participating in the production and distribution of our products, as well as for all buyers of our products who are entrepreneurs. The parties to contracts with us who are entrepreneurs undertake to transfer this exoneration clause to their customers to the extent that they on their part are entrepreneurs and as far as our products are concerned. 12. Place of Fulfilment and Jurisdiction 12.1 The place of fulfilment for all contract demands shall be Vienna, if the product is taken from Vienna factory; if the product is taken from Sebersdorf factory, Sebersdorf is a place of fulfilment. 12.2. For partners from the European Union countries as well as from the European Economic Area and for the partners with headquarter situated in a country, which has an enforcement agreement with Austria the court having subjectmatter jurisdiction in Vienna is agreed as a place of fulfilment for all contract demands. 12.3. For the partners from countries, which do not fall under the point 12.2 the court having subjektmatter jurisdiction in Vienna is agreed as a place of fulfilment. HERZ reserves the right to sue for the contract demand in each case in the responsible court. 12.4. In subsidiarity to these Terms and Conditions of Sale, Delivery and Payment, Austrian legal provisions are to be applied exclusively. The application of the UN-Convention on Contracts for the International Sale of Goods is expressly excluded. 171 Index of Article Numbers Article Number Page 0100 0110 0112 0256 0270 0272 0273 0275 0276 0280 0282 0283 0284 0674 48 56 56 114 118 118 114 114, 118 114 118 118 118 112, 113 158 1001 1056 58 162 2000 2100 2104 2110 2117 2137 2160 2190 2202 2268 2269 2300 2301 2302 2303 2304 2305 2319 2333 2362 2363 2372 2402 2412 2414 2415 2420 2442 2453 2503 2512 2604 2605 2606 2607 2608 2609 2610 2611 2612 2613 2621 2622 2623 2630 2634 2662 2667 2669 2670 2682 2687 2689 2902 2911 52 73, 102 72 102 62 70 73 86 96 74 74 104 104 105 104 108 108 108 162 105-107 107 106 73 74 74 74 95 126 73 96 74 72 72 72 72 72 72 72 72 72 72 74 72 102 72 74 111 72 72 72 101 72 72 73 132 3001 3002 3003 3004 3010 3011 50 50 50 50 162 142, 162 172 Article Number Page 3012 3021 3030 3031 3032 3033 3041 3042 3061 3062 3066 3089 3091 3093 3095 3166 3192 3197 3266 3292 3295 3404 3437 3448 3466 3691 3692 3693 3694 3723 3724 3725 3726 3733 3734 3737 3741 3742 3748 3761 3762 3766 3791 3792 3793 3794 3798 3799 3923 3924 3937 3942 3948 49 44 49-50 51 51 49 48 48 48 48 46 67 43 43 43 47 43 43 47 43 43 50 48 48 45 41 41 41 41 37 37 38 38 37 32 37 48 48 37 48 48 45 41 41 41 41 42 42 36 36 36 33 36 4000 4001 4002 4002 4004 4006 4007 4008 4010 4011 4017 4037 4095 4111 4112 4113 4115 4117 4119 4120 4125 4126 4133 4144 4145 4207 112 77 78 119 77 77, 114 78, 87, 119 91-95 97 97 80 69 114 90, 111 75 75 84, 100 79, 98 74 50 84, 100 101 49 145 145 78 Article Number Page 4215 4216 4217 4218 4315 4325 4415 4417 4500 83, 99 81 81-82 87-88 103 85, 103 83 82 70, 75, 77 5151 5523 5524 5537 5548 53 40 40 40 40 6066 6092 6098 6165 6198 6206 6209 6210 6211 6213 6218 6219 6220 6221 6223 6235 6236 6240 6241 6244 6248 6249 6252 6262 6265 6266 6272 6273 6274 6275 6276 6281 6284 6286 6292 6294 6301 6302 6303 6304 6305 6310 6313 6329 6330 6332 6333 6350 6351 6357 6360 6362 6365 6367 6372 6376 6379 6382 6385 6386 6387 6388 6389 6390 157 157 157 67 157 114 143 143 143 143 143 143 142, 144-145 144 142 143 144-145 144-145 144 144 142 143 143 142, 160 160 160 160 158 158 160 158 159 158 158 158 158 64 64 134 64 65 64 8 5, 65 52 51 51 8 8 8 67 13 65 65, 67 134 67 65, 67 115 115, 117-118 119 117, 119 116, 118 115, 117 65 Article Number 6391 6403 6413 6501 6503 6510 6512 6517 Page 6518 6519 6520 6600 6615 6616 6618 6625 6630 6639 6640 6680 6701 6702 6705 6710 6800 6807 6808 6809 6810 6819 6822 6823 6824 6833 6837 6848 6890 65 134 134 64 64 64 64 114-115, 117, 119 116 115, 117 117 63 63 63 63 63 63 63 63 63 66 66 66 66 63 63 63 63 66 63 50 39 39 39 39 39 66 7000 7151 7173 7174 7175 7176 7187 7188 7189 7216 7217 7220 7226 7230 7235 7260 7262 7420 7421 7523 7524 7528 7555 7623 7624 7628 7633 7634 7637 7638 7645 7646 7648 7650 7658 7659 7671 7672 7675 7677 7688 16 53 52 52 52 52 52 53 52 96 60-61, 80 96 96 3 5 3, 5, 9, 13 3 8 8 29 29 29 16 30, 35 30, 35 30, 35 30, 35 35 30, 33 30, 35 30, 33, 35 30, 33, 35 30 53 30, 35 30, 35 28 28 28 28 53 Index of Article Numbers Article Number 7708 7709 7710 7711 7712 7713 7714 7715 7716 7717 7718 7723 7724 7727 7728 7733 7734 7736 7737 7738 7740 7742 7745 7745 7746 7748 7758 Page 7760 7761 7762 7763 7765 7766 7767 7768 7771 7772 7777 7778 7780 7781 7783 7784 7786 7788 7791 7793 7794 7795 7796 7834 7923 7924 7928 7940 7958 7959 7990 18-19 18 18 18 62, 69-70 29 29 29 29 29 29 24, 27, 31, 34, 61 24, 27, 31, 33-34 52 24, 27, 31, 34, 52 24, 31, 34 32, 34 32 24, 31 31, 34 5 33 24, 31 34, 58 24, 31, 34, 58 24, 31 24, 27-28, 31, 34, 52 24, 27-28, 31, 34, 52 59, 61 58 59 59 57 69, 95-96 54 54 28 28 28 28 68 68 55-57 55-57 55 53 17 71 17 17, 20 19 32 25 25 25 17 25 25 18 8100 8250 8422 8445 8447 8448 8451 8522 8525 8531 8532 8533 8535 8537 23, 49 21 122 162 160 160 122 126 162 5, 131-132 131 132 132 126 7759 Article Number Page 8538 8541 8545 8569 8574 8575 8576 8900 8903 126 126 162 133 127 127 127 113 113 9102 9200 9201 9230 9238 9239 9260 9330 9350 9352 9355 9358 9420 9421 9430 9460 9551 9552 9553 9554 9596 9597 9598 9599 9860 9861 5, 10, 14, 69 4-5, 8-10, 13 22 3, 5, 9, 13 10 14 3, 8-9, 13 7, 12, 14 7, 12, 14 7, 12, 14 7, 12, 14 7, 12, 14 12 8, 12, 95 7, 12 7, 12 16 16 16 16 16 16 16 16 3, 9 3, 9 1 7790 17 3 C101 3 C140 3 C160 3 C180 3 C200 3 C260 3 C320 3 C400 3 C500 3 C630 139 139 139-140 139 139-140 139-140 139-140 139 139 139 3 D160 139 3 F010 3 F030 3 F040 3 F070 3 F080 3 F090 3 F100 3 F110 3 F531 3 F532 3 F532 3 F533 3 F791 3 F792 3 F798 3 F798 3 F799 3 F900 165 135 135 136 137 136 137 137-138 127-128 129 130 129 17 17 130 133 20 134 HV-BF-FLG HV-BF-SLG HV-BF-FLL HV-BF-SLL 89 89 89 89 Article Number G 1160 G 1200 G 1260 G 1320 G 17016 G 17020 G 17026 G 17032 G 17116 G 17120 G 17126 G 17132 G 17216 G 17220 G 17226 G 17232 HV2740 HV5150 HV5153 HV5154CXC HV5154CXCLS HV5516 HV5520 HV5520LS HVCH25 HVDCV HVDCVC HVPRV HVPRVC HVWC25 Page Article Number Page 109 109 109 109 109-110 109-110 109-110 109-110 110 110 110 110 109-110 109-110 109-110 109-110 P 7040 141, 146, 152-153, 156, 163 P 7050 141, 146, 152-153, 156, 163 P 7063 88 76 90 76 76 76 76 76 90 102 102 101 101 90 P 7126 141, 146, 152-153, 156, 163 147 51, 123-124, 142, 150, 155 51, 123-125, 142, 150-151, 155 51, 123-125, 142, 150-151, 155 51, 123-125, 142, 150-151, 155 123, 150-151, 155 150-151, 155 150, 155 150, 155 150, 155 156 145 51, 147 P 7110 P 7114 P 7116 P 7118 P 7120 P 7132 P 7140 P 7150 P 7163 P 7200 P 7210 P 7214 P 7216 P 7218 P 7232 P 7240 P 7250 P 7263 P 7298 51, 86, 96, 124, 147-149, 154, 156 86, 96, 147-149, 154 147-149, 154 147-149, 154 147-149, 154 147-149, 154 125 S 3726 S 6281 S 6292 S 7924 S 9230 S 9238 S 9239 38 159 159 26 6 11 15 3 S910 3 S912 3 S913 3 S918 3 S919 3 S940 3 S958 3 S970 120 120-121 120 120 120 120 120 120 P 7220 P 0181 P 0441 P 0442 P 0443 P 0444 P 0445 P 0446 P 0450 P 1020 P 1025 P 1928 P 2010 P 2011 P 2016 P 2018 P 2020 P 2021 P 2022 P 2026 P 2032 P 2040 P 2050 P 2063 P 3124 P 3126 P 3128 P 7010 P 7014 169 169 169 169 169 169 169 163 156 122 162 164-168 165, 167 165 165 165 164 164 165 165 165 165 165 122, 161 122, 161 122, 161 146, 156 141-142, 146, 153, 156, 163 P 7016 141-142, 146, 152-153, 156, 163 P 7018 141-142, 146, 152-153, 156, 163 P 7020 141-142, 146, 152-153, 156, 163 P 7026 141, 146, 152-153, 156, 163 P 7032 141, 146, 152-153, 156, 163 51, 86, 96, 124, 147-149, 154, 156 51, 86, 144, 147-149, 154 P 7226 TMV+15 TMV+22 TMV01 95 95 95 UH05251 UH10052 UH10151 UH10152 96 96 96 96 HERZ order numbers are seven-digit numbers. The first digits describes the application area, digits 2-5 are the article number and the last two digits specify the particular version. In order to provide a better overview, only the four-digit article numbers are specified in the present Index of Article Numbers. 173 Notes 174 Notes 175 Notes 176 HERZ Valves UK Progress House 6 Moorfield Point 6 Moorfield Road 6 Slyfield Industrial Estate 6 Guildford 6 Surrey 6 GU1 1RU Telephone: 01483 502211 Fax: 01483 502025 e-mail: sales@herzvalves.com www.herzvalves.com DVR 0092541 GLN 9004174000003 ARA 2102 All specifications and statements within this brochure are according to information available at the time of printing and meant for informational purpose only. Herz Armaturen reserves the right to modify and change products as well as its technical specifications and/or it functioning according to technological progress and requirements. It is understood that all images of Herz products are symbolic representations and therefore may visually differ from the actual product. Colours may differ due to printing technology used. In case of any further questions don’t hesitate to contact your closest HERZ Branch-office. LP-GB-0611-Bell-1SD Handelsgericht Wien FN 101 622 w
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Page Count : 180 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:0b85d7c8-ba9f-40f2-ba50-b163e8e7c726 Producer : Acrobat Distiller 7.0.5 for Macintosh Modify Date : 2011:09:01 14:59:05-07:00 Create Date : 2011:09:02 14:09:35+03:00 Metadata Date : 2011:09:01 14:59:05-07:00 Document ID : uuid:14f4fedc-d554-11e0-9700-001451654a04 Instance ID : uuid:14f502ec-d554-11e0-9700-001451654a04 Format : application/pdf Title : untitledEXIF Metadata provided by EXIF.tools