Hoja De Datos Comunicador Campo 475

User Manual: Hoja-de-Datos Comunicador-de-Campo-475

Open the PDF directly: View PDF PDF.
Page Count: 8

475 Field Communicator Product Data Sheet
May 2013
475 Field Communicator
Full-color graphical user interface
Powerful eld diagnostics
Bluetooth® communication
Long-lasting Lithium-Ion power module
Universal support for HART® and Foundation
eldbus devices
Introduction
The 475 Field Communicator builds on the industry-leading
technology of the 375 Field Communicator while adding
innovative new capabilities including color display, Bluetooth
communication, and advanced eld diagnostics
with applications like ValveLink Mobile.
What you get is the most powerful handheld available –
universal, user upgradeable, intrinsically safe, rugged and
reliable. Only the 475 Field Communicator can deliver all
this in a single handheld communicator.
Product Description
The 475 Field Communicator is designed to simplify your work
in the eld. The intuitive full color user interface allows you
to leverage the same practices for both HART and Foundation
eldbus devices. It includes a larger touch screen than PDAs
or Pocket PCs, supports HART versions 5, 6, and 7 (including
WirelessHART) devices, and allows you to upgrade your
475 Field Communicator onsite using the Internet.
See and Feel the Difference
The touch screen display uses transective technology, making
it easy to read in both bright sunlight and normal lighting. To
make sure all conditions are covered, a multi-level backlight is
included, allowing bright, crisp display even in plant areas with
dim light.
The 475 Field Communicator is designed to support all HART and
Foundation eldbus devices from all vendors.
www.eldcommunicator.com2
475 Field Communicator May 2013
The touch screen display and large physical navigation buttons
provide for efcient use both on the bench and in the eld.
The icon-based user interface allows you to navigate quickly
and efciently.
The full color graphics capability is provided as standard
with every 475 Field Communicator. It uses powerful EDDL
technology to allow you to read data from eld devices in a
graphical manner. Charts, graphs, gauges, and product images
are just a few of the ways in which important device data can
be displayed using the 475 Field Communicator’s color LCD
display.
The weight of the 475 Field Communicator is evenly distributed
for comfortable one-handed operation in the eld. It runs on
Windows CE, a robust, real-time operating system. The 475
Field Communicator has plenty of memory to allow for future
expansion. It has 32 MB of application memory and 1 GB of
memory on its System Card.
New HART and Foundation eldbus devices, as well as
functional updates to existing devices, are introduced
continually by device vendors. Keeping up-to-date with the
required Device Descriptions (DDs) for all the devices in your
plant can be a real challenge.
With Easy Upgrade, when new HART and Foundation eldbus
DDs become available, you can simply download them from the
Internet and upgrade your 475 Field Communicator. Update at
your site, within your control, when it’s convenient for you.
Online Licensing
The Online Licensing capability provided with Easy Upgrade
allows you to enable new options for your 475 Field
Communicator over the Internet. With Online Licensing,
powerful options like Foundation eldbus can be added by
simply purchasing the license and downloading it directly
to your communicator.
Gain advanced diagnostics in the eld through ValveLink Mobile and enhanced graphics.
The Easy Upgrade Utility allows you to transfer system software,
DDs, and HART device congurations between the 475 Field
Communicator and a PC.
www.eldcommunicator.com3
475 Field Communicator May 2013
Universal – HART and Foundation fieldbus
With over 1,300 different HART and Foundation eldbus
devices available from more than 100 manufacturers, the
475 Field Communicator works with all your devices to
positively impact your bottom line.
Through Easy Upgrade, you always have access to the latest
HART and eldbus drivers. With the 475 Field Communicator,
you are guaranteed universal HART and Foundation eldbus
support in a single, intrinsically safe handheld communicator.
Intrinsically Safe
The 475 Field Communicator meets the Intrinsic Safety
requirements of the listed regulatory agencies and standards.
All of the available Hazardous Locations approvals are provided
in a single model option (see Ordering Information).
CENELEC/ATEXvibration is present.
Factory Mutual (FM)
Canadian Standards Association (CSA)
FISCO
IECEx
Even the power module is approved for installation in
hazardous areas.
Rugged and Reliable
It’s called “Field Communicator” for a reason. Some tasks just
have to be performed at the device in the eld. The 475 Field
Communicator is designed for tough use in your plant or mill. Its
large keys and physical navigation buttons allow for one-handed
operation, even with your work gloves on. The rugged display
is designed to take the knocks and shocks from normal use in
the plant.
The 475 Field Communicator, with its handy carrying case, provides a single tool for conguring and diagnosing HART and Foundation
eldbus devices.
ATEX
Easily store and print device congurations for analysis and
documentation requirements.
Tag: PT-105
Manufacturer: Rosemount
Model: 3051S Diag
146 Variables
Printed on: 5/19/2009 9:06:38 AM
Device Configuration
Parameter
Variation Custom S...
2nd Variable
3rd Variable
Abnormal Situation P...
Alarm Direction
Analog Output
Baseline Mean Value...
Baseline Standard D...
Burst Mode
Burst Option
Calibration Type
Cutoff Mode
Damping
Damping
Date
Descriptor
Dev flags
Device Status
Diaphragm Material
Distributor
Drain Vent Matl
Electronics HW Rev
Electronics S/N
Electronics SW Rev
Fact trm recal loc
Field Device Rev
100%
Sensor Temperature
Scaled Variable
0x00
Hi
3,999 mA
0.000000 inH20
0.000000 inH20
Off
Unknown Enumerato...
Diff (DP)
Off
0.90 s
0.00 s
02/14/2008
PRODUCTION XMT...
0x00
0x50
None
Rosemount
316 SST
1
407
5
Sensor trim
1
Value Parameter
Lower Sensor Limit
Lower Trim Point
Manufacturer
Maximum Temperat...
Mean
Mean Change Check
Mean Change Sensit...
Mean Chg Action
Mean Custom Sens...
Mean Lower Thresh...
Mean Upper Thresh...
Measurement
Message
Min Span
Min Span
Min Span
Mode
Model
Model Number I
Model Number II
Model Number III
Module Config
Module Range
No Label Available
Num req preams
Number
0.00000
0.0
Rosemount
80.002 F
-0.031420 inH20
6*
Medium
Alert
100%
0.000000 inH20
0.000000 inH20
Diff (DP)
MISSING CAP
4.5
0.00000
0.0
Off
3051S Diag
1
2
3
Std coplanar (C)
3
0x00
5
None
Value
www.eldcommunicator.com4
475 Field Communicator May 2013
The 475 Field Communicator’s Protective Rubber Boot provides
added protection in the eld and in your toolbox. Both the
rubber boot and 475 housing are designed in accordance
with Intrinsic Safety standards to limit the build up of static
electrical energy.
The 475 Field Communicator is designed, manufactured,
and tested to very demanding specications. It is ready to
go wherever you need to go to get the job done.
Powerful Diagnostics
Interface with AMS Device Manager
The 475 Field Communicator is fully compatible with
AMS Device Manager, the industry standard for asset
management software. In fact, Control Magazine readers
have selected AMS Device Manager as the #1 Calibration
Software package for over 13 years in a row.
AMS Device Manager uses the intelligence from eld
devices to create a predictive maintenance environment.
AMS Device Manager allows you to congure, calibrate,
document, and troubleshoot HART, Foundation eldbus,
and WirelessHART devices.
Transfer device conguration data to AMS Device Manager
via the IrDA port or Bluetooth interface on your 475 Field
Communicator and PC. Take your 475 Field Communicator
out to the eld to congure or update one or more devices.
Save up to 1,000 device congurations in your communicator
or transfer them to AMS Device Manager.
Together, the 475 Field Communicator and AMS Device
Manager enable you to efciently manage all of your devices.
Device Configuration Management
Using the Easy Upgrade Utility, you can back up hundreds of
device congurations and can transfer them between your
communicator and a PC. This library of device congurations
is easy to view and print for analysis.
Identify Valve Problems
Run valve diagnostics in the eld with the ValveLink Mobile
application. You can quickly perform tests including valve
signature, dynamic error band, PD one button sweep, and step
response on HART and Foundation eldbus Fisher® FIELDVUE
digital valve controllers.
The intuitive user interface makes ValveLink Mobile easy to
use and understand. Diagnose issues in the eld or transfer
the results to an asset management system like AMS Suite
for in-depth analysis and documentation.
Diagnose Network Problems
The 475 Field Communicator can be used to congure all
the Foundation eldbus devices in your plant. Use it to perform
diagnostics for effective start-up and troubleshooting of
eldbus segments. Cr eate a quality segment by diagnosing
the network DC voltage and average noise.
Detect power supply problems by monitoring low frequency
noise on a segment. Locate incorrect terminations and faulty
devices by diagnosing the communications signal level.
For HART loops, the 475 Field Communicator allows you to
verify whether the DC voltage in the loop is correct.
The protective rubber boot provides added protection in the eld.
www.eldcommunicator.com5
475 Field Communicator May 2013
Specifications
Processor And Memory
Microprocessor 80 MHz Hitachi® SH3
Memory Internal Flash 32 MB
System Card 1 GB secure digital card
RAM 32 MB
Physical
Weight Approximately 1.65 lb. (0.75kg) with battery
Display 1/4 VGA (240 by 320 pixels) color, 3.5 in. (8.9 cm) transective display with touchscreen
Anti-glare coated
Keypad 25 keys including 4 action keys, 12 alphanumeric keys, tab key, function key, backlight key, power key, and
4 cursor-control (arrow) keys; membrane design with tactile feedback
Power Supply / Charger
Battery Rechargeable Lithium-Ion power module
Battery Operating Time 20 hours – continuous use
40 hours – typical use
80 hours – standby mode
Battery Charger Options Input voltage 100-240 VAC, 50-60 Hz
Cables included with U.S., Europe, and U.K. plugs
Connection
Battery Charger Mini DIN 6-pin jack
HART and Fieldbus Three 4mm banana jacks (one common to HART and Foundation eldbus
IrDA Port IrDA (Infrared Data Access) port supporting up to 115 Kbps
± 15 degrees recommended maximum angle from center line
Approximately 18 in. (45.7 cm) recommended maximum distance
Bluetooth Up to 32.8 ft. (10 m) communication distance
Uses standard Windows drivers
FCC, IC, and CE approvals
Certied for use in over 60 countries
Environmental
Usage -10°C (14°F) to +50°C (122°F)
Battery 0% to 95% RH (non-condensing) for 0°C (32°F) to +50°C (122°F)
Charge 10°C (50°F) to +40°C (104°F)
Storage With Batteries -20°C (-4°F) to +55°C (131°F)
Storage Without Batteries -20°C (-4°F) to +60°C (140°F)
Enclosure Rating IP51 (from front)
Shock Tested to survive a 1-meter drop test onto concrete
Easy Upgrade Requirements
Usage PC with Internet access
CD Rom drive
IrDA port (or adapter) or Bluetooth (or adapter)
SD Card Reader (required for some upgrades)
Windows XP (SP2 or SP3), Windows Vista Business (SP1), or Windows 7
www.eldcommunicator.com6
475 Field Communicator May 2013
475 Field Communicator Spare Parts List
Description Part Number
00275-0096-0001 Ruggedized 250 Ohm Load Resistor
00475-0002-0022 Rechargeable Lithium-Ion Power Module
00475-0003-0022 Power Supply & Charger (Li-ion/NiMH) US/UK/EU connection types included
00375-0003-0002 Power Supply/Charger Standard Cord Set (US/UK/EU cords)
00375-0003-0003 Australian (AU) cord for Power Supply/Charger
00375-0004-0001 Lead Set with connectors
00475-0005-0002 Hand Strap (pack of 2)
00475-0005-0003 Carrying Case (with spare Hand Strap and Stylus)
00475-0005-0004 Magnetic Hanger
00475-0005-0005 Protective Rubber Boot with Stand
00475-0006-0001 Stylus (pack of 2)
00375-0015-0002 IrDA to USB Adapter (1)
00375-0018-0022 System Card (SD) Reader (with USB Interface) (2)
00475-0018-0023 Bluetooth Adapter (1) (9)
00475-0044-0001 Stand
00475-0019-FK01 Field Accessory Kit (6)
00475-0019-SK01 Shop Accessory Kit (Bluetooth) (7) (9)
00475-0019-SK02 Shop Accessory Kit (non-Bluetooth) (7)
00475-0045-3001 Getting Started Guide
00475-0049-0001 Resource CD (8)
00475-0049-DVD1 Resource DVD
00475-0050-TRN1 Technical Training CD
Online Licensing (4)
00375-0142-0002 FOUNDATION eldbus License Via Web
00475-0142-2003 Easy Upgrade (New/Renew) License via Web (3)
AMS Device Manager Handheld Interface Kit (5)
AW7005HC00025 AMS Device Manager Field Communicator Interface Kit (25 tags)
AW7005HC20000 AMS Device Manager Field Communicator Interface Kit (100 Tags and above)
(1) Can be used to support communication between the 375/475 and the Easy Upgrade Programming Utility or AMS Device Manager (with Handheld Communicator
Interface Kit). Either IrDA or Bluetooth communication is required to register the 375/475 or use the Online Licensing system.
(2) The System Card (SD) Reader allows a user the ability to upgrade a System Card much faster than when using IRDA or Bluetooth. Due to le size constraints, major
upgrades require the use of a card reader.
(3) The Easy Upgrade feature allows users to add new System Application software and Device Descriptions (DDs) to the 475 for a period of 3 years. To upgrade without this
feature, the System Card would have to be sent to a Service Center (fee would apply). When purchased, the expiration date becomes three (3) years from the date of the
PO of three (3) years from the expiration date of the current license - whichever is greater. Current license can only be renewed within 6 months of the expiration date on
the current license.
(4) These parts support license upgrades of System Cards in the eld through the use of the Field Communicator Online Licensing system. The capacity is available to end
users and may also performed by an agent on the user’s behalf. It is at the agents discretion if an additional fee should apply. Any order must be accompanied by the
System Card S/N. Instant notication of when the licenses are available for download are sent to emails provided at time of order. For further details, see the Online
Licensing procedure at www.eldcommunicator.com.
(5) Requires AMS Device Manager (v6.2 or higher). Both AMS Device Manager and the Handheld Communicator Interface Kit are available for sale through select channels
only. See www.assetweb.com for more details.
(6) Contains Protective Rubber Boot, Ruggedized 250 Ohm Load Resistor, Magnetic Hanger, Stylus Pack, and Technical Training CD.
(7) Contains Field Accessory Kit plus System Card Reader, Bluetooth Adapter, and Resource CD and DVD. Non-Bluetooth model substitues IRDA to USB adapter for
Bluetooth adapter.
(8) Same content as Resource CD, but also includes localized versions for English, German, Russian, and Japanese.
(9) Not available for purchase from Rosemount - Chanhassen. Use alternative channel to order this part.
www.eldcommunicator.com7
475 Field Communicator May 2013
475 Field Communicator Ordering Information
Model Product Description
475 Field Communicator (1)
Code Communication Protocol
H HART
FHART and Foundation eldbus (2)
Code Battery Type
PRechargeable Lithium-Ion Power Module
Code Power Supply/Charger
1 Power Supply and Charger NiMH/Li-Ion (US/UK/EU connection types included) (3)
9 Not included (4)
Code Language
E English
C Chinese
DGerman
J Japanese
R Russian
FFrench
P Portuguese
Code Product Certications
KL ATEX, FM, CSA and IECEx Intrinsically Safe (includes FISCO as applicable)
NA No Approval
Code Easy Upgrade
UEasy Upgrade (3 year) Option (5)
9 Not Included
Code Standard Options
GM Graphics (included at No Charge) (6)
Device Conguration Management (included at No Charge) (7)
Code Bluetooth
TBluetooth Communication (8)
9 No Bluetooth Communication
Code Options
ASpare Rechargeable Lithium-Ion Power Module (9)
S Protective Rubber Boot with Stand
Typical HART Model Number: 475 H P 1 E KL U GMT S
Typical HART/Fieldbus Model Number: 475 F P 1 E KL U GMT S
(1) Base Model 475 includes Field Communicator unit with Color LCD display, System Card, leadset with connectors, carrying case, Getting Started Guide, Resource CD, stylus, and straps.
(2) Must specify Easy Upgrade Option (Code U) when ordering this model option.
(3) To obtain an Australia power cord, order part number 00375-0003-0003.
(4) This option should only be considered if the user already has a 375 or 475 Power Supply/Charger. If it is a 375 Power Supply / Charger, it must be the Li-Ion/NiMH version.
(5) The Easy Upgrade capability allows users to add new System Application software and Device Descriptions (DDs) to the 475 for a period of 3 years. To upgrade without
this feature, the System Card would have to be sent to a Service Center.
(6) The Graphics functionality enables a user to access enhanced grapical features when using the HART or Foundation eldbus application.
(7) Device Conguration Management provides the capablity to store in excess of 1,000 congurations and print them.
(8) Bluetooth enables communication to a PC via the Bluetooth protocol.
(9) A fully charged Lithium-Ion Power Module is capable of delivering power for 20 hours of typical eld use. If requirements exceed this specication, a Spare Power Module (code A)
should be specied.
475 Field Communicator May 2013
Emerson Process Management
12001 Technology Drive
Eden Prairie, MN 55344 USA
T 1(952) 828-3633
F 1(952) 828-3006
www.fieldcommunicator.com
©2014, Emerson Process Management.
The contents of this publication are presented for informational purposes only, and while every
effort has been made to ensure their accuracy, they are not to be construed as warranties or
guarantees, express or implied, regarding the products or services described herein or their
use or applicability. All sales are governed by our terms and conditions, which are available on
request. We reserve the right to modify or improve the designs or specications of our products
at any time without notice.
All rights reserved. AMS is a mark of one of the Emerson Process Management group of
companies. The Emerson logo is a trademark and service mark of Emerson Electric Co. All other
marks are the property of their respective owners.

Navigation menu