How To Configure RS232 For SMP Players
How to Configure RS232 for SMP Players How to Configure RS232 for SMP Players
User Manual: How to Configure RS232 for SMP Players
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
How to configure RS232 for SMP players Introduction ...................................................................................................................................... 1 Get Patches from CAYIN .................................................................................................................... 1 Procedures ........................................................................................................................................ 2 Appendix A: Using Docklight to Send RS-232 Command .................................................................. 9 Introduction This document will guide you to configure your system with patches provided by CAYIN. Follow the procedures below to control SMP players via RS232 easily with the extra new functions. Get Patches from CAYIN The COM port control patches are now available for the following SMP models and versions. Users can download it from PartnerNet by the following URL. Patch Model Version Downloading URL P09264.psu SMP-WEBDUO 1.0 http://partner.cayintech.com/download/sw/P09264.psu P09265.psu SMP-PROPLUS 1.0 http://partner.cayintech.com/download/sw/P09265.psu P09266.psu SMP-WEBPLUS P09267.psu SMP-WEBPLUST P09268.psu SMP-PRO3 1.5/2.0 http://partner.cayintech.com/download/sw/P09268.psu P09269.psu SMP-PRO3N 1.5/2.0 http://partner.cayintech.com/download/sw/P09269.psu P09270.psu SMP-WEB3 1.5/2.0 http://partner.cayintech.com/download/sw/P09270.psu P09271.psu SMP-WEB3N 1.5/2.0 http://partner.cayintech.com/download/sw/P09271.psu P09294.psu SMP-WEBPLUS 4.5/5.0 http://partner.cayintech.com/download/sw/P09294.psu P09295.psu SMP-WEBPLUS-T 4.5/5.0 http://partner.cayintech.com/download/sw/P09295.psu P09296.psu SMP-PRO3 2.5/3.0 http://partner.cayintech.com/download/sw/P09296.psu P09297.psu SMP-PRO3N 2.5/3.0 http://partner.cayintech.com/download/sw/P09297.psu P09298.psu SMP-WEB3 2.5/3.0 http://partner.cayintech.com/download/sw/P09298.psu P09299.psu SMP-WEB3N 2.5/3.0 http://partner.cayintech.com/download/sw/P09299.psu 3.5/4.0 http://partner.cayintech.com/download/sw/P09266.psu 4.0 Copyright @ CAYIN Technology Co., Ltd http://partner.cayintech.com/download/sw/P09267.psu 1 How to configure RS232 for SMP Players Procedures Step 1: Plug RS-232 cable into SMP player SMP supports serial ports with 9 pins D-type socket. Since socket types may differ from devices, some special cables such as “null modem cables”, “pin converter”, “gender changer” or “custom made cables” are sometimes required. Please check your device manual for detailed information. Step 2: Connect Your PC to the Web Manager Enter the IP address in a browser to connect to the Web Manager. Copyright @ CAYIN Technology Co., Ltd 2 How to configure RS232 for SMP Players Step 3: Upload the patch 1. Go to System Status -> Basic Information to check your product model and firmware version. Please make sure you upload the correct patch for your product. 2. Go to the System -> Maintenance and click [Browse…] button in system maintenance area. You can select and upload the patch file (.psu or .fsu) here. The system will restart to apply those changes. Please login to Web Manager again and go to System Status to check the patch information in Firmware Information area. Step 4: Configure RS232 settings 1. Go to System -> System and find the RS-232 Control area at the bottom of this page. Copyright @ CAYIN Technology Co., Ltd 3 How to configure RS232 for SMP Players RS-232 configuration For functional communication through a serial port interface, conventions of Baud rate, Data-Bit, Parity, Flow Control and Stop Bit are not pre-defined in RS-232. Please check your display manual for correct communication parameters. For example, the communication parameters in the above picture are based on SONY display (including FWD-40LX2F, FWD-40LX2X, FWD-32LX2F, FWD-32LX2X, KLH-W32, and KLH-W26 models). Please make sure the parameters here are consistent with the connected device. Copyright @ CAYIN Technology Co., Ltd 4 How to configure RS232 for SMP Players Configure RS-232(COM Port) commands Press [Add RS-232 Command] to add commands to control SMP players. With SMP-PRO/WEB series, you need to input the information below: 1. Command Name 2. Choose Command Type 3. Command String, either in ASCII or Hex format. With SMP-PRO series, there are two types of commands: “Display command” and “User-define command”. Please refer to your device manual to setup the corresponding command strings. Copyright @ CAYIN Technology Co., Ltd 5 How to configure RS232 for SMP Players ¾ Display Command You can choose “Turn on Display” or “Turn off Display” command in “Display Command”. You will learn more information about how to execute those commands from the following sections. If you choose ”Display Command” to turn on/turn off the screen remotely or schedule when you want to turn off the screen, the system will automatically send such command to the display via RS232 port to turn on/turn off display power. Copyright @ CAYIN Technology Co., Ltd 6 How to configure RS232 for SMP Players ¾ User-define command You can add at most 20 user-define commands to send command to your device which connects to SMP player. For example, you can control display’s Contrast, Brightness, Auto Adjust…and so on via RS232. You can refer to the manual of the connected device for command strings. For example, if you add a command to change Display Brightness (string: 8C10010232D1 (HEX) ), you can press [send] to change the brightness value of display to 50. Copyright @ CAYIN Technology Co., Ltd 7 How to configure RS232 for SMP Players ¾ Playlist Command This command is only for SMP-WEB series. After setting up these commands, SMP will wait for RS232 command to automatically trigger WEB playlist by RS-232 tool (such as docklight, please refer to Appendix A) for serial communication protocols. [Important] You must send a complete “Receive command string” within one second from your PC, or the string will be treated as 2 different commands in SMP player. The interface may be different from the model you selected. For SMP-WEB3, there is one web playlist and the playlist index begins from 0 to 9. For SMP-WEBDUO, there are two web playlists and the playlist index begins from 0 to 30. You can create your own string for Playlist command. Please make sure you set the same command string in both SMP and simulation tool. Copyright @ CAYIN Technology Co., Ltd 8 How to configure RS232 for SMP Players Appendix A: Using Docklight to Send RS-232 Command Docklight is a testing, analysis and simulation tool for serial communication protocols (RS232, RS485/422 and others). It allows you to monitor the communication between two serial devices or to test the serial communication of a single device. Docklight is easy to use and runs on almost any standard PC using Windows Vista/XP/2000/NT 4 operating system. NOTE Docklight is a shareware that can help you send/receive RS-232 string from your PC. You can also use other similar software to send or receive RS-232 strings. Please download Docklight from website http://www.docklight.de/ ¾ How to Use Docklight 1. After installing Docklight successfully, you can launch the program from desktop. This is an evaluation version. You can press [OK] to continue or purchase a Docklight User License from its online shop (http://www.docklight.de/shop_en.htm) Copyright @ CAYIN Technology Co., Ltd 9 How to configure RS232 for SMP Players 2. Press [OK] to continue. 3. Select “Start with a blank project / blank script” to continue. Copyright @ CAYIN Technology Co., Ltd 10 How to configure RS232 for SMP Players 4. Press “Project settings” to setup COM Port settings (including Baud Rate, Data bits, Parity, Stop Bits, and Parity Error Char). Please make sure the settings here are consistent with the connected SMP player. 5. Press the red frame area to add RS232 command. Copyright @ CAYIN Technology Co., Ltd 11 How to configure RS232 for SMP Players 6. Enter command name and command string, and press [OK] to save. 7. Press the right arrow button to send command to SMP player, and trigger Playlist 1 index 1. Copyright @ CAYIN Technology Co., Ltd 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39 Producer : Acrobat Distiller 8.1.0 (Windows) Source Modified : D:20090702093423 Creator Tool : Acrobat PDFMaker 8.1 for Word Modify Date : 2009:07:02 17:36:10+08:00 Create Date : 2009:07:02 17:35:41+08:00 Metadata Date : 2009:07:02 17:36:10+08:00 Document ID : uuid:f1c8a86e-2fb8-4213-814b-49291f0c4746 Instance ID : uuid:e99d08db-1e35-44ae-9da0-ce2344ba2590 Subject : 33 Format : application/pdf Creator : ellen Title : How to configure RS232 for SMP players Page Count : 12 Page Layout : OneColumn Author : ellenEXIF Metadata provided by EXIF.tools