IXP300/IXP400 Installers Guide IXP300 IXP400 V1.00

User Manual: IXP300 IXP400 Installers Guide v1.00

Open the PDF directly: View PDF .
Page Count: 308 [warning: Documents this large are best viewed by clicking the View PDF Link!]

Scroll down to view the document on your mobile browser.

Manufacturers Details
Distributor Details
Introduction
- Document Conventions
- Terminology
  - Impro-Specific Terminology
  - Country-Specific Terminology
- Supported Software and Firmware Versions
- Compliance with UL
  - Not Evaluated by UL
- ImproX Units Evaluated by UL
General Hardware Installation Guidelines
- Essential Installation Requirements
- Unit Serial Numbers
- Power Supply
- Communication
  - Recommended Cable
- Network Topology
- Placement of ImproX Units
- Grounding the Shield in an IXP400 System
- Grounding Controllers and Terminals in an IXP400 System
  - Common Ground
  - Separate Ground Points
- Terminating the Communication Bus
  - Host Bus (Port 2)
  - Terminal Bus (Port 1)
- Door Hardware Units
  - Door Strike
  - Magnetic Locks
Summary of Cable Requirements
- General Requirements
  - Notes
  - Metric Conversion
- Low Voltage Power Supply to ImproX Controllers and Terminals
- Digital Input Specifications
Input Voltage Requirements
- Comms Interfaces
- Enrollment Readers
  - ProX-Mate and Utility ProX-Mate(
- Controllers
  - ImproX AC
  - ImproX IC
- Terminals
ImproNet Hardware Components
- Interface Devices
- Card Readers
- Controllers
  - Controller Operation and Functionality
- Terminals
  - Tag Reading Terminals
  - Non Tag-Reading Terminals
- Bus Types
  - Host Bus (Controller Port 2)
  - Terminal Bus (Controller Port 1)
- System Hardware Combinations
  - IXP300
  - IXP400
- ImproX Units that can be used in an IXP300 or IXP400 System
- System Size Limits
Installation Information
- Doors and Zones
- Addressing Scheme
- Positioning Units
ImproX Unit Categories
- Comms Interfaces
ImproX HI Host Interface
- Applications
  - Features
  - Accessories
- Specifications
- International Standards
  - Approvals
  - Tamper-Proofing
- Installation Information
- Enclosure
- Electrical Connections
- Operational Information
  - Address Allocation
  - Remote Firmware Downloading
ImproX RH Registration Interface
- Tag Read/Write Ranges
- Approvals
- Specifications
- Installation Information
  - Accessories
  - General
- Mounting the Cabinet
- DIP-switch Settings
- Electrical Connections
  - Connecting the ImproX RH
- Power-on Self-test
  - Testing the Connection
- Fixed Address Label
- Operation and Functionality
ImproX RS Registration Interface
- Key Features
- Typical Read Range
- Approvals
- Specifications
- Installation Information
- Electrical Connections
- Fixed Address Label
ImproX ProxMate
- Applications
- Features
- Accessories
- Specifications
- Installation Information
ImproX RRA Registration Reader Antenna
- Tag Read/Write Ranges
- Approvals
- Specifications
- Installation Information
- Electrical Connections
  - Connecting the ImproX RRA
- Initial Start-up
- Serial Number Label
- Operation and Functionality
ImproX IC LCD Keypad Controller
- Approvals
- Specifications
  - Physical
  - Environmental
- Electrical
  - Factory Default Settings
  - Operator or Installer Interfaces
- Installation Information
- Electrical Connections
  - Connecting the ImproX IC Controller
- Power-on Self-test
- Fixed Address Label
- Operation and Functionality
ImproX AC Advanced Controller
- Approvals
- Specifications
- Installation Information
- Mounting the Controller
- Electrical Connections
  - Connecting the ImproX AC Controller
- Power-on Self-test
- Fixed Address Label
- Operation and Functionality
ImproX TT Twin Antenna Terminal
- Tag Read/Write Ranges
- Approvals
- Specifications
- Interface Details
- Installation Information
- Mounting the ImproX TT
- Electrical Connections
  - Connecting the ImproX TT
  - Power-on Self-test
- ImproX TT Address Information
  - Address Allocation
- Fixed Address Label
- Operation and Functionality
ImproX ER Extended Range Terminal and Fibreglass Antenna
- Tag Read Ranges
- Approvals
- Specifications
- Installation Information
  - Accessories
  - General
- Mounting the Terminal and the Antenna
- Electrical Connections
  - Connecting the ImproX ER
- Installation Test Mode
  - Power-on Self-test
- Fixed Address Label
- Operation and Functionality
ImproX I16 16 Channel Input Terminal
- Approvals
- Specifications
- Interface Details
- Installation Information
  - Accessories
  - General
- Mounting the ImproX I16
- Electrical Connections
  - Connecting the ImproX I16
- ImproX I16 Address Information
- Fixed Address Label
- Operation and Functionality
ImproX O16 16 Channel Output Terminal
- Approvals
- Specifications
- Interface Details
- Installation Information
  - Accessories
  - General
- Mounting the ImproX O16
- Electrical Connections
  - Connecting the ImproX O16
- ImproX O16 Address Information
- Fixed Address Label
- Operation and Functionality
ImproX MA Micro Antenna Reader
- Tag Read/Write Ranges
- Approvals
- Specifications
- Installation Information
  - Accessories
  - General
- Mounting the ImproX MA
- Electrical Connections
  - Connecting the ImproX MA
  - Initial Start-up
- Serial Number Label
- Operation and Functionality
ImproX MHA Metal Antenna Reader
- Tag Read/Write Ranges
- Approvals
- Specifications
- Installation Information
  - Accessories
  - General
- Mounting the ImproX MHA
- Electrical Connections
  - Connecting the ImproX MHA
- Initial Start-up
- Serial Number Label
- Operation and Functionality
ImproX MMA Mullion Antenna Reader
- Tag Read/Write Ranges
- Approvals
- Specifications
- Installation Information
  - Accessories
  - General
- Mounting the ImproX MMA
- Electrical Connections
  - Connecting the ImproX MMA
- Initial Start-up
- Serial Number Label
- Operation and Functionality
ImproX KHA Metal Keypad Antenna Reader
- Tag Read/Write Ranges
- Approvals
- Specifications
- Installation Information
  - Accessories
  - General
- Mounting the ImproX KHA
- Mounting the Front Cover onto the Backing Plate
- Electrical Connections
  - Connecting the ImproX KHA
  - Initial Start-up
- Serial Number Label
- Operation and Functionality
Hardware Maintenance
- Maintenance Overview
- Basic Maintenance
  - Cleaning Unit Housing
  - Cleaning Inside Unit
- Maintenance Tools
- Hardware Testing
- Specific Maintenance
Minimum PC Specifications
- Database Server
- ImproNet Module PCs
- Known Issues
ImproNet Applications
- ImproNet Modules
- ImproNet Utilities
Peripheral Hardware
- ProX-Mate(
  - INS900
  - Utility ProX-Mate – XPM910\(
- Host Interface—Serial Communications Conv
- USB Enrollment Readers
  - New Features
- ImproX RH
- ImproX RS(
- ImproX RRA
- ImproX RRM(
ImproNet Network Specifications
- Architecture
- ImproNet Modules in a Network Environment
- General Network Requirements
- Running ImproNet Applications across a LAN
- Running ImproNet Applications across a WAN
  - Minimum WAN Requirements
- Properties Files
- Configuring ImproNet Modules for a Stand Alone (Single PC) S
  - Connecting to the Database
- Configuring ImproNet Modules for a LAN
  - Connecting to the Database
- Configuring ImproNet Modules for a WAN
  - Advanced Engine Settings
  - Connecting to the Database
- Using Routers Configuration
System Concepts
- System Architecture Concepts
- Sites
- System Building Blocks
Software Installation Procedure
- New ImproNet Installation
- Installing the Database Server
- ImproNet Installation Procedure
- Installing the Access or Engine Modules Only
- Upgrading an Existing Installation
Pre-Configuration Procedure
- Identifying the Hardware
Configuration Overview
- Using ImproNet Access
- Common Interface Controls
- A Note on Screenshots
System Configuration Parameters
- A Note on Fixed Addresses
Engine Functions
- Engine Menu Functions
- Engine Properties
- Advanced Properties
- System Configuration Procedure
Sites
- Open ImproNet Access
  - Run Auto-ID to Detect Access Hardware
  - Deleting Nodes
- Shared Data
- About Time Patterns
  - Device Time Pattern
  - Access Time Pattern
- Configure Site
  - Add Site
  - Delete Site
- Set Up the Host PC
- About Hardware Configuration
Controller
- Assign Terminals
Terminals
- Edit Terminal Parameters
  - Special Codes
  - Duress Codes
- Terminal Mode Configuration
- Inputs
- Outputs
  - General Relay
  - Status LED
- Actions
  - About Actions
  - About Events
- Active System Events
  - Configure Active System Events
  - Advanced Active Systems Events
Access Time Patterns
- Configure Access Time Patterns
Areas
- Select Area
Access Groups
- Access Descriptions
- Configure Tag Holder Access Groups
- Configure Access Descriptions
Tag Holders – Assign Access to Tags
- Add or Edit a Tag Holder
  - Quick Search for Tag Holder
- Configure Tag Holder
- Batch Enrollment of Tags
- Advanced Search
  - Search Operators
  - Available Search Fields
Device Time Patterns
- Create a Device Time Pattern
Holidays
- Add, Edit, or Delete a Holiday
  - Configure Holidays
Time Triggered Actions
- Add a Time Triggered Action
  - Delete a Time Triggered Action
- Configure Time Triggered Actions
Actions
- Edit and Delete Actions
  - Edit an Action
  - Delete Action
Inputs
Outputs
Common Zones
Messages
- Create a Message
  - Delete a Message
Common Zones
- Why Common Zones?
- Configure Common Zones
Emergency Unlock
- Set Up Emergency Unlock Mode
- Activating Emergency Unlock via an Input
  - Configure Controller Action
  - Configure Terminal Input
Supervisor Unlock
- Configure Supervisor Unlock
Random Search
- The Random Search Event
  - Parameters
- Set Up Random Search
  - About the Frequency 1 to 255
  - Enable Search at Specific Times Only
- Example
  - Configure Input
  - Create Action
Operator Security
- System Administrator Group
  - Create Group
- Security Access
- Users
- Tag Holder Access Groups
- User Profiles
CSV Import
- CSV Overview
  - Why Import a CSV File?
  - How to Create a CSV File
- Importing a CSV File
- Creating a CSV File
  - Example
- Ensuring Correct CSV File Format
- Structure of Master, Department, and Employee Tables
DBUpgrade
- Database Upgrade Procedures
Firmware Upgrade
- Identify Firmware Versions
Replacing Controllers and Terminals
- Replace Controller
- Replace Terminal

Navigation menu