IS DL8408WT 10

2018-05-07

: Is-Dl8408Wt 10 is-dl8408wt_10 images 708 p4dbimg

Open the PDF directly: View PDF PDF.
Page Count: 2

Package Contents
Pleasegoto forproductcleaningtips.Gotothe selection.
(2)B10CandelabraBaseBulbs60WMaximumor
(2)CandelabraBaseT8VintageBulbsarerecommendedbutnotsupplied.
www.quoizel.com Care+Maintenance
ToolsRequired:Flatheadscrewdriver, Phillips screwdriver,pliers,wirecutters,wirestrippers,electricaltape,safetyglasses.
LightSource:
EstimatedAssemblyTime:
Preparation:
20-30minutes
Identifyandinspectallpartsbeforebeginninginstallation.Checkpackagecontentlistanddiagramsbelowtobesureallpartsare
present.Ifanypartsaremissingordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomerserviceforreplacement
parts.
Warnings and Cautions
1of2
Assembly Instruction Sheet #IS-DL8408WT
For Style DL8408WT
2017 QuoizelInc.
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal.
E
B
Mounting
Screw
x2
Inner Backplate
x1
A
Front Glass
Panel
x1
D
Fixture
Body
x1
Figure 2
C
Figure 1
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
ReleasedDate:2017-09-14
Side Glass
Panel
x2
STEP 2 Install Inner Backplate-
A. Pass the supply wires and ground wire through Inner Backplate (A).
Attach the Inner Backplate (A) to the Outlet Box with the head of
Green Ground Screw facing you. Secure it with Outlet Box Screws
(not included). Tighten until snug with screwdrivers.
Outlet Box Screw
(not supplied)
A
Supply Wires and
Ground Wire
Outlet Box
STEP 3 - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Green Ground Screw
on the Crossbar
White wire
from outlet box White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
Figure 3
Slot
C
D
E
Tab
Lock Screw
BOTTOM VIEW
Tab
Corner
STEP 1 Install Glass Panels-
A. Place the Fixture Body (C) onto a flat
working surface with the bottom of the
cage facing you.
B. Remove lock screws and tabs from the
bottom corners of the Fixture Body (C).
C. Insert the Side Glass Panels (E) into
the side slot in the Fixture Body (C).
Insert the Front Glass Panel (D) into
the front slot in the Fixture Body (C).
Attach tabs back onto bottom corners
of the Fixture Body (C) to hold Glass
Panels (D/E) and secure with
previously removed lock screws. Hand
tighten until snug with screwdrivers.
2of2
2017 QuoizelInc.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
ReleasedDate:2017-09-14
STEP 4 - Install Fixture Body
A. the the
Mounting
Attach Fixture Body (C) over Inner Backplate (A) and secure
with Screws (B). Tighten until snug with screwdrivers.
A
B
C
Figure 4
DL8408WT
FINISH: WESTERN BRONZE
NOTE: ALL DIMENSIONS ARE ROUNDED UP
TO THE NEAREST 1/4"
STEP 5 - Install Bulbs
A. s onto socketsInsert bulb and screw snugly into place.
Socket
T8 Vintage Bulb
(recommended
but not Supplied)
STEP 6 - Apply Silicone Sealer
A. Make sure the exterior wall
surface and fixture backplate
are free of dirt before applying
caulk. Using exterior grade
caulk, caulk over top of
backplate and down both sides.
Do not caulk the bottom of the
fixture backplate to ensure
proper moisture drainage.
Your fixture is now assembled
and ready to use. Enjoy!
Exterior
Grade Caulk
Exterior
Grade
Caulk
Backplate
Figure 5
Figure 6
8” 6.25”
12.75”
9”
19”
Fixture can
only be
mounted in
the direction
indicated
5”

Navigation menu