Is Hc9013ib
2017-08-30
: Is-Hc9013Ib is-hc9013ib images 708 p4dbimg
Open the PDF directly: View PDF .
Page Count: 5
Download | |
Open PDF In Browser | View PDF |
Assembly Instruction Sheet #IS-HC9013IB For Style HC9013IB 6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Quoizel, Inc. 6 Corporate Parkway Goose Creek, SC 29445 Customer Service Phone 631.273.2700 Fax 631.231.7102 www.quoizel.com Tools Required: Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses. Bulb Recommended: Medium Base (1) 150W Maximum Estimated Assembly Time: 20-30 minutes Preparation: Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement parts. Warnings and Cautions Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt. These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly recommend that a licensed, professional electrician perform the installation. Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool before removal. Do not subject glass parts to any shock while in operation or shattering may result. E Package Contents Part Description A F Quantity A Mounting Screw 3 pcs. B Cage 1 pc. C Socket Assembly 1 pc. D Lock Ball 4 pcs. E Fixture Hood 1 pc. F Lock Screw A 4 pcs. G Lock Screw B 8 pcs. H Tab 8 pcs. I Glass Panel 4 pcs. G B H I C D Thank you for purchasing a Quoizel product. Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com February2012 2012 QuoizelInc. 1of5 HC9013IB FINISH: IMPERIAL BRONZE 13” Sq. 1 19.5” 2 (1)150W Medium Base Bulb (Not Supplied) NO. PART NUMBER NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2" REPLACEMENT PART DESCRIPTION REQ. 1 19013IBHC BASE IMPERIAL BRONZE HC9013IB 1 2 G1800PA PANEL OPAQUE LINEN 13”H X 9.5”W 4 2of5 6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-HC9013IB For Style HC9013IB STEP 1 - Attach Cage to Fixture Body Figure 1 A. Locate the Bolts on the bottom of Cage (B) through the holes on the Bar on the Socket Assembly (C). Secure them together with Lock Balls (D) . Hand tighten until snug. Cage Bolt Socket Assembly Bar Lock Ball STEP 2 - Attach panel to Cage Lock Screw B A. Insert Glass Panels (I) into the Slot in the bottom edge of the Cage (B) properly. B . Locate Tabs (H) onto the top edge of the Cage (B). Line up the holes on Tabs (H) and the Mounting Holes on the top edge of the Cage (B). By using screwdriver, thread Lock Screws B (G) into the Mounting Holes on the Cage (B) to secure Glass Panels (I). Hand tighten until snug. Tab Glass Panel Mounting Hole Slot Cage Figure 2 Thank you for purchasing a Quoizel product. Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com February2012 2012 QuoizelInc. 3of5 6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-HC9013IB For Style HC9013IB STEP 3 - Drill Pilot Holes on Post A. Carefully fit the Post Fitter over the end of the Post (not supplied), making sure the Post Fitter is fully seated. B. Mark the drill point for the (3) Mounting Screws, using (3) Mounting Holes as reference. After marking hole locations, remove fixture from post and drill 1/16” pilot holes for screws. Post Fitter Post Figure 3 STEP 4 - Make Wire Connections A. Use standard wire connectors to make all wire connections. (Connectors are not included with fixture.) Strip and prepare wire ends according to instructions supplied with connectors. B. Connect White Supply Wire from the Post to White Wire from fixture. C. Connect Black (or Red) Supply Wire from the Post to Black Wire from fixture. D. Connect Ground Wire from the Post to Ground Wire from fixture. E. Twist connectors until wires are tightly joined together. F. Wrap each connection with approved electrical tape and carefully stuff all the connected wires into the Post. Post White wire from supply White wire from fixture Black wire from supply (or Red) Black wire from fixture Ground wire from supply Ground wire from fixture Figure 4 Figure 5 Thank you for purchasing a Quoizel product. Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com February2012 2012 QuoizelInc. 4of5 6 CORPORATE PARKWAY GOOSE CREEK , SC . 29445 www . quoizel . com Assembly Instruction Sheet #IS-HC9013IB For Style HC9013IB STEP 5 - Attach Fixture Body to Post Figure 6 A. Coat the top 1” of the Post with Clear Silicone Caulk (not supplied) and position the Post Fitter onto the Post. Be sure to seat it completely, aligning the holes in the Fitter with the 1/16” Pilot Holes drilled into the Post. B. Secure the Fixture to Post with (3) Mounting Screws. Mounting Screw Post Post Fitter Mounting Hole STEP 6 - Install Bulb Socket A. This fixture uses standard bulb with a standard screw base. Maximum 150 watts. B. Insert bulb and screw properly into place. Bulb Figure 7 STEP 7 - Attach Fixture Hood to Cage A. Place the Fixture Hood (E) onto the top edge of the Cage (B). Line up the Mounting Holes in the bottom edge of the Fixture Hood (E) and the Holes on the top edge of the Cage (B). Secure them together with Lock Screws A (F). Hand tighten until snug with screwdrivers. Your fixture is now assembled and ready to use. Enjoy! Figure 8 Fixture Hood Mounting Hole Hole Cage Lock Screw A Thank you for purchasing a Quoizel product. Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700 or visit us on-line at www.quoizel.com February2012 2012 QuoizelInc. 5of5
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Page Count : 5 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:cdb18f42-30a6-4af5-b01d-ced7c47f8c39 Producer : Acrobat Distiller 6.0 (Windows) Create Date : 2012:02:17 10:35:31+08:00 Modify Date : 2012:02:17 10:35:31+08:00 Document ID : uuid:08b23d10-c464-4461-ab60-70c467b1c36a Format : application/pdf Title : untitledEXIF Metadata provided by EXIF.tools