Is Hc9013ib

2017-08-30

: Is-Hc9013Ib is-hc9013ib images 708 p4dbimg

Open the PDF directly: View PDF PDF.
Page Count: 5

Part Description Quantity
A
1pc.
3 pcs.
Cage
B
C
Package Contents
Quoizel, Inc.
6 Corporate Parkway
Goose Creek, SC
29445
Customer Service
Phone 631.273.2700
Fax 631.231.7102
www.quoizel.com
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing
the fixture. We strongly recommend that a licensed, professional electrician perform the installation.
Disconnect fixture from power source before replacing bulbs. Make sure bulbs are given sufficient time to cool
before removal. Do not subject glass parts to any shock while in operation or shattering may result.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2012 QuoizelInc.
A
B
C
Mounting Screw
Assembly Instruction Sheet #IS-HC9013IB
For Style HC9013IB
1of5
Socket Assembly
Lock Ball
ToolsRequired:Flatheadscrewdriver,Phillipsscrewdriver,pliers,wirecutters,wire
strippers,electricaltape,safetyglasses.
EstimatedAssemblyTime:20-30 minutes
Preparation:Identifyandinspectallpartsbeforebeginninginstallation.Checkpackage
contentlistanddiagramsbelowtobesureallpartsarepresent.Ifanypartsaremissing
ordamaged,donotattempttoassemble,install,oroperatethefixture.Contactcustomer
serviceforreplacementparts.
D
F
4 pcs.
1pc.
1pc.
D
EFixture Hood
E
4 pcs.
FLock Screw A
G
8 pcs.
GLockScrewB
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
BulbRecommended: (1)150WMaximumMediumBase
February2012
H
8 pcs.
HTab
I
4 pcs.
IGlass Panel
HC9013IB
2of5
FINISH: IMPERIAL BRONZE
1
2
PART NUMBER
19013IBHC
G1800PA
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/2"
REPLACEMENT PART DESCRIPTION
BASE IMPERIAL BRONZE HC9013IB
PANEL OPAQUE LINEN 13”H X 9.5”W
REQ.
1
4
NO.
(1)150W Medium
Base Bulb
(Not Supplied)
13” Sq.
19.5”
1
2
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2012 QuoizelInc.
3of5
STEP 1 -Attach Cage to Fixture Body
A. Locate the Bolts on the bottom of Cage (B) through the
holes on the Bar on the Socket Assembly (C). Secure
them together with Lock Balls (D) . Hand tighten until
snug.
Figure 1
STEP 2 -Attach panel to Cage
A. Insert Glass Panels (I) into the Slot in the bottom edge
of the Cage (B) properly.
B . Locate Tabs (H) onto the top edge of the Cage (B). Line
up the holes on Tabs (H) and the Mounting Holes on the
top edge of the Cage (B). By using screwdriver, thread
Lock Screws B (G) into the Mounting Holes on the Cage
(B) to secure Glass Panels (I). Hand tighten until snug.
Figure 2
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Cage
Lock Ball
Socket Assembly
Bolt
Bar
Glass Panel
Tab
LockScrewB
Cage
Slot
Mounting
Hole
Assembly Instruction Sheet #IS-HC9013IB
For Style HC9013IB
February2012
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2012 QuoizelInc.
4of5
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
STEP 3 -Drill Pilot Holes on Post
A. Carefully fit the Post Fitter over the end of the Post (not
supplied), making sure the Post Fitter is fully seated.
B. Mark the drill point for the (3) Mounting Screws, using
(3) Mounting Holes as reference. After marking hole
locations, remove fixture from post and drill 1/16” pilot
holes for screws.
Post
Figure 3
Post Fitter
Figure 5
STEP 4 Make Wire Connections-
A. Use standard wire connectors to make all wire
connections. (Connectors are not included with fixture.)
Strip and prepare wire ends according to instructions
supplied with connectors.
B. Connect White Supply Wire from the Post to White Wire
from fixture.
C. Connect Black (or Red) Supply Wire from the Post to
Black Wire from fixture.
D. Connect Ground Wire from the Post to Ground Wire from
fixture.
E. Twist connectors until wires are tightly joined together.
F. Wrap each connection with approved electrical tape and
carefully stuff all the connected wires into the Post.
Figure 4
White wire from supply White wire from fixture
Black wire from supply
(or Red)
Black wire from fixture
Ground wire from supply Ground wire from fixture
Post
Assembly Instruction Sheet #IS-HC9013IB
For Style HC9013IB
February2012
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-631-273-2700
or visit us on-line at www.quoizel.com
2012 QuoizelInc.
5of5
STEP 5 -Attach Fixture Body to Post
A. Coat the top 1” of the Post with Clear Silicone Caulk
(not supplied) and position the Post Fitter onto the Post.
Be sure to seat it completely, aligning the holes in the
Fitter with the 1/16” Pilot Holes drilled into the Post.
B. Secure the Fixture to Post with (3) Mounting Screws.
Mounting Screw
Post
Figure 6
Post Fitter
Mounting
Hole
6 CORPORATE PARKWAY
GOOSE CREEK SC 29445
www quoizel com
,.
..
Bulb
Figure 7
STEP 6 -Install Bulb
A. This fixture uses standard bulb with a standard screw
base. Maximum 150 watts.
B. Insert bulb and screw properly into place.
Socket
STEP 7 -Attach Fixture Hood to Cage
A. Place the Fixture Hood (E) onto the top edge of the Cage
(B). Line up the Mounting Holes in the bottom edge of the
Fixture Hood (E) and the Holes on the top edge of the
Cage (B). Secure them together with Lock Screws A (F).
Hand tighten until snug with screwdrivers.
Your fixture is now assembled and ready to use. Enjoy!
Figure 8
Fixture
Hood
Mounting
Hole
Hole
Cage
Lock Screw A
February2012
Assembly Instruction Sheet #IS-HC9013IB
For Style HC9013IB

Navigation menu