Pull Plate 8311 Ives 9264
User Manual: Pull Plate 8311
Open the PDF directly: View PDF 
.
Page Count: 4
| Download | |
| Open PDF In Browser | View PDF |
Long Door Pulls Hinges & Pivots Long Door Pulls A Offered in two Models: 9264 9266 Offset Straight B10 Pulls & Plates • • • • • • Heavy 1-1/4” Round Brass or Stainless Steel Round or Flat Tip 316 Stainless Steel 1-3/4˝, 2˝ or 2-1/4˝ Door Thickness Round Tip Standard Flat Tip Optional Flush Bolts & Coordinators Dimensions C Length: 36” / 20” CC 72” / 56” CC Diameter: 1-1/4” Projection: 2-3/4” Special Lengths Available D Latches, Catches & Bolts 18” and 24” Custom lengths available from 36” to 144” US3 US4 US10B US32 US32D BHMA 605 606 613 629 630 E Stops Finishes Ives Number Exterior Hardware Offset Bracket Flat Tip F Note: A middle position bracket is required for pulls over 8 feet. G Miscellaneous Hardware B10 Round Tip Ives Architectural hardware products Push Plates Hinges & Pivots Mounting Type Standard Mount A • All mounting hardware is for standard 1-3/4” door. • Consult Customer Service if other than standard. Type G Mount B15 Pulls & Plates C Flush Bolts & Coordinators Concealed Pull Plate Mounting • (2) 3/8-16 x 2-1/4” brass, flat head machine screws; plate to match. • (2) 3/8-16 countersunk washers; plated to match Note: 8102HD and 8105 have (2) 5/16-18 x 2-1/2” machine screws -Options: (2) 5/16 countersunk washers Available only for 8302, 8303, 8311 Pull Plates. Pull mounts directly onto plate. Plate is attached to door by 6 screws. Note: 8302 has (2) 5/16-19 x 5/8” steel flathead zinc plated screws Type H-I-L Mount D Type F Mount • (2) 3/8-16 x 5/8” steel flat head machine screws; zinc plated. Latches, Catches & Bolts Standard Mounting E Stops Available only for 8102HD, 8103HD, 8105, 8111, 8302, 8303, 8305 and 8311. Plate on opposite side of door must be ordered separately. • (2) Steel screw sleeves; zinc plated. • (2) Steel countersunk trim head machine screw; zinc plated for reinforced metal door. • (2) Steel countersunk trim head steel metal screw; zinc plated for wood doors. Note: 8102HD, 8302 will have 5/16-18 8105, 8111, 8305, 8311 will have 1/4-20 8103HD, 8303 will have 3/8-16” Note: 8102HD and 8302 will have 5/16-18” 8103HD, 8103EZHD, 8303 will have 3/8-16 Ives Architectural hardware products G Available only for 8102, 8103, 810EZ or wood door pulls, 8302, 8303 pull plates and 9264, 9265, 9266 and 9267 long door pulls. Miscellaneous Hardware • (2) 2-1/4” steel flat head machine screws; zinc plated. F Reinforced Hollow Metal Door Concealed Pull Mounting Exterior Hardware Wood Doors Concealed Pull Mounting With Push Plate B15 A Hinges & Pivots Architectural Door Trim Mounting • All mounting hardware is for standard 1-3/4” door. • Consult Customer Service if other than standard. Back to Back Pull Mounting Available only for 8121-5 Pulls. • (4) Steel screw sleeve nuts; steel zinc plated. • (8) No. 8-32 x 1” brass oval head machine screws; plated to match. Pulls furnished in pairs (PR). G Miscellaneous Hardware F Exterior Hardware E Stops D Latches, Catches & Bolts C Flush Bolts & Coordinators B16 Pulls & Plates Type K Mount B16 Ives Architectural hardware products Architectural Door Trim • Consult Customer Service if other than standard. Type J/N Mount Type O Mount A • All mounting hardware is for standard 1-3/4” door. Hinges & Pivots Mounting for 8103EZ, 8190, 9100, 9103EZ, 9190 and 9264, 9265, 9266 and 9267 long door pulls. B17 Pulls & Plates (pull) Wood or Metal Door Available only for 8103EZHD, 8190HD, 9100HD push/pull combinations and 9264, 9265, 9266 and 9267 long door pulls. Pushbar to Pull - (1) 3/8 - 16 X 3”steel countersunk trim head machine screws with (2) set screws. - (1) steel screw sleeve, zinc plated. • (2) 3/8-16 x 2-1/4” blind thru - bolts; plated to match. Type NO Push/Pull Mounting Type N & Type O Pushbar to Pull - (1) 3/8 -16 X 3”steel countersunk trim head machine screws with (2) set screws. - (1) steel screw sleeve, zinc plated. Free End Pushbar & Pull - (2) 3/8 - 16 X 2-1/4” blind thru-bolts; plated to match. E Stops Free End Pushbar & Pull - (2) 3/8 - 16 X 2-1/4” brass, oval head mach screws; plated to match. - (2) No. 14 countersunk washers; plated to match. Available only for 8103EZHD, 8190HD and 9100HD Series Push/Pull Combinations. D Type NS-Standard Push/Pull Mounting Type N & Standard Wood or Metal Door Latches, Catches & Bolts • (2) 3/8-16 x 2-3/4” steel countersunk trim head machine screws with (4) set screws for maximum anchoring force. • (2) Steel screw sleeves; zinc plated. Decorative Blind Thru - Bolt C Back to Back “Two-Anchor” Flush Bolts & Coordinators (push) Type P Mount F Exterior Hardware • (2) 3/8-16 x 2-1/4” steel countersunk trim head machine screws with (4) set screws for maximum anchoring force. • (2) Steel screw sleeves; zinc plated • (2) Metal and Vinyl washers Ives Architectural hardware products G Available only for 8103EZHD, 8190HD, 9100HD, 9265 and 9266 long door pulls. Miscellaneous Hardware 1/2” Glass Door B17
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Create Date : 2015:07:21 15:19:57-04:00 Creator : Adobe InDesign CS6 (Macintosh) Modify Date : 2015:07:21 15:19:57-04:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2015:07:21 15:19:57-04:00 Creator Tool : Adobe InDesign CS6 (Macintosh) Format : application/pdf Document ID : uuid:6e801494-3cfd-4c2b-a63a-72b6b5ef2efc Instance ID : uuid:43e96838-9484-4d8b-814b-0a71950d003a Producer : Adobe PDF Library 10.0.1 Page Count : 4EXIF Metadata provided by EXIF.tools