C John Deere 244 J Install

User Manual: John Deere 244 J Install

Open the PDF directly: View PDF PDF.
Page Count: 5

DownloadC John Deere 244 J Install
Open PDF In BrowserView PDF
John Deere 244 J
Weighlog 100/200 Installation
Supplement
This supplement will show some of the locations for mounting the equipment included in this scale system.
The installations shown are not required locations they are only intended as a guide.

Head Unit Mounting
The customer mounted the head unit to the dash panel. The back side of the dash has
a reinforcement plate to make the mount solid.

John Deere 244 J
Weighlog 100/200 Installation
Supplement
Load Sensor Installation
This installation was made by using the ORFS Fitting supplied in the kit. The location is at the end
of the hoses coming from the lift cylinder.

Load Sensor Mounting
The Pressure Sensor was mounted to the plate towards the front of the machine with the bracket supplied.
Note the loom installed on the hoses to help prevent premature wear.

John Deere 244 J
Weighlog 100/200 Installation
Supplement
Reference/Direction Sensor
The Ref/Dir sensor mounting bracket for this installation was bolted to the plate by drilling 2 holes.
Be sure the mounting will not interfere with the lift arm operation.

Reference/Direction Sensor
The magnet was mounted using the bracket supplied and bolted to the inside of
the lift arm by drilling and using the flange plate on the lift arm.

John Deere 244 J
Weighlog 100/200 Installation
Supplement
Junction Box Mounting
The Junction box was mounted to the right-hand side of the dash panel as shown.

Remote Enter Switch
The remote enter switch needs to be mounted to allow easy access by the operator.
The cable will be routed to the floor and under the mat to the junction box.

John Deere 244 J
Weighlog 100/200 Installation
Supplement
Wiring and Connections
Switched power can be found under the panel shown and the cable routed under
the floor mat to the junction box location.

Wiring and Connections
The cables sensor cables will be routed through the center of the machine to the junction box.
Use the black loom to cover the cables to help prevent premature failure. Use caution when routing cables
through the center piviot of the machine.
Source Exif Data: 
File Type                       : AI
File Type Extension             : ai
MIME Type                       : application/vnd.adobe.illustrator
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 5
Creator                         : Adobe Illustrator(R) 10.0
For                             : Jeff Pearson, Loup Electronics
Title                           : C:\Documents and Settings\Owner\My Documents\RDS Manuals\Supplement Installation Manuals\Installs\John Deere 444H Install.pdf
Create Date                     : 11/18/2006 9:15 PM
Bounding Box                    : 17 23 595 755
Creator Version                 : 10
Container Version               : 9
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:2a5eef7c-d066-4985-9d53-b7a9ab21e5cf
Modify Date                     : 2006:11:18 21:42:57-06:00
Metadata Date                   : 2006:11:18 21:42:57-06:00
Document ID                     : uuid:22405cc4-e614-4331-a641-1bb0819df903
Format                          : application/pdf
Producer                        : Adobe PDF library 5.00
Image Height                    : 732
Image Width                     : 578
Image Size                      : 578x732
Megapixels                      : 0.423
EXIF Metadata provided by EXIF.tools

Navigation menu