34972 90001_UG_EN Keysight 34972A Data Acquisition Unit User's Guide
User Manual:
Open the PDF directly: View PDF
Page Count: 345 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Keysight 34970A/34972A Data Acquisition / Switch Unit
- Software Updates/Licenses
- Restricted Rights Legend
- Safety Symbols
- Safety Considerations
- Regulatory Markings
- Waste Electrical and Electronic Equipment (WEEE) Directive 2002/ 96/EC
- Sales and Technical Support
- Keysight 34970A/34972A Data Acquisition / Switch Unit
- The Front Panel at a Glance
- The Front-Panel Menu at a Glance
- Display Annunciators
- The 34970A Rear Panel at a Glance
- The 34972A Rear Panel at a Glance
- BenchLink Data Logger 3 at a Glance
- The Plug-In Modules at a Glance
- Table of Contents
- List of Tables
- 1 Quick Start
- 2 Front-Panel Overview
- Front-Panel Menu Reference
- To Monitor a Single Channel
- To Set a Scan Interval
- To Apply Mx+B Scaling to Measurements
- To Configure Alarm Limits
- To Read a Digital Input Port
- To Write to a Digital Output Port
- To Read the Totalizer Count
- To Output a DC Voltage
- To Configure the Remote Interface - 34970A
- To Configure the Remote Interface - 34972A
- To Store the Instrument State
- 3 System Overview
- 4 Features and Functions
- SCPI Language Conventions
- Scanning
- Scanning with External Instruments
- General Measurement Configuration
- Temperature Measurement Configuration
- Voltage Measurement Configuration
- Resistance Measurement Configuration
- Current Measurement Configuration
- Frequency Measurement Configuration
- Mx+B Scaling
- Alarm Limits
- Digital Input Operations
- Totalizer Operations
- Digital Output Operations
- DAC Output Operations
- System-Related Operations
- Single-Channel Monitoring
- Mass Memory (USB) Subsystem - 34972A
- USB Drive Front Panel - 34972A
- Remote Interface Configuration - 34970A
- Remote Interface Configuration - 34972A
- Calibration Overview
- Factory Reset State
- Instrument Preset State
- Multiplexer Module Default Settings
- Module Overview
- 34901A 20-Channel Multiplexer
- 34902A 16-Channel Multiplexer
- 34903A 20-Channel Actuator
- 34904A 4x8 Matrix Switch
- 34905A/6A Dual 4-Channel RF Multiplexers
- 34907A Multifunction Module
- 34908A 40-Channel Single-Ended Multiplexer
- 5 Error Messages
- 6 Application Programs
- 7 Tutorial
- System Cabling and Connections
- Measurement Fundamentals
- The Internal DMM
- Temperature Measurements
- Sources of Error in Thermocouple Measurements
- DC Voltage Measurements
- Sources of Error in DC Voltage Measurements
- AC Voltage Measurements
- Sources of Error in AC Voltage Measurements
- Current Measurements
- Sources of Error in DC Current Measurements
- Sources of Error in AC Current Measurements
- Resistance Measurements
- Sources of Error in Resistance Measurements
- Strain Gage Measurements
- Frequency and Period Measurements
- Low-Level Signal Multiplexing and Switching
- Actuators and General-Purpose Switching
- Matrix Switching
- RF Signal Multiplexing
- Multifunction Module
- Relay Life and Preventive Maintenance
- 8 Specifications
- Index