LG42LM6200 Service Manual
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 129
| Download | |
| Open PDF In Browser | View PDF |
Internal Use Only North/Latin America Europe/Africa Asia/Oceania http://aic.lgservice.com http://eic.lgservice.com http://biz.lgservice.com LED LCD TV SERVICE MANUAL CHASSIS : LA22E MODEL : 42LM6200 42LM6200-UE CAUTION BEFORE SERVICING THE CHASSIS, READ THE SAFETY PRECAUTIONS IN THIS MANUAL. P/NO : MFL67460414 (1202-REV00) Printed in Korea CONTENTS CONTENTS . ............................................................................................. 2 PRODUCT SAFETY ................................................................................. 3 SPECIFICATION........................................................................................ 4 ADJUSTMENT INSTRUCTION............................................................... 10 SCREW ASSEMBLY WORKING GUIDE................................................ 20 EXPLODED VIEW .................................................................................. 21 SCHEMATIC CIRCUIT DIAGRAM .............................................................. Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes -2- LGE Internal Use Only SAFETY PRECAUTIONS IMPORTANT SAFETY NOTICE Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and Exploded View. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer. General Guidance Leakage Current Hot Check (See below Figure) Plug the AC cord directly into the AC outlet. An isolation Transformer should always be used during the servicing of a receiver whose chassis is not isolated from the AC power line. Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injury from electrical shocks. It will also protect the receiver and it's components from being damaged by accidental shorts of the circuitry that may be inadvertently introduced during the service operation. If any fuse (or Fusible Resistor) in this TV receiver is blown, replace it with the specified. When replacing a high wattage resistor (Oxide Metal Film Resistor, over 1 W), keep the resistor 10 mm away from PCB. Keep wires away from high voltage or high temperature parts. Do not use a line Isolation Transformer during this check. Connect 1.5 K / 10 watt resistor in parallel with a 0.15 uF capacitor between a known good earth ground (Water Pipe, Conduit, etc.) and the exposed metallic parts. Measure the AC voltage across the resistor using AC voltmeter with 1000 ohms/volt or more sensitivity. Reverse plug the AC cord into the AC outlet and repeat AC voltage measurements for each exposed metallic part. Any voltage measured must not exceed 0.75 volt RMS which is corresponds to 0.5 mA. In case any measurement is out of the limits specified, there is possibility of shock hazard and the set must be checked and repaired before it is returned to the customer. Leakage Current Hot Check circuit Before returning the receiver to the customer, always perform an AC leakage current check on the exposed metallic parts of the cabinet, such as antennas, terminals, etc., to be sure the set is safe to operate without damage of electrical shock. Leakage Current Cold Check(Antenna Cold Check) With the instrument AC plug removed from AC source, connect an electrical jumper across the two AC plug prongs. Place the AC switch in the on position, connect one lead of ohm-meter to the AC plug prongs tied together and touch other ohm-meter lead in turn to each exposed metallic parts such as antenna terminals, phone jacks, etc. If the exposed metallic part has a return path to the chassis, the measured resistance should be between 1 MΩ and 5.2 MΩ. When the exposed metal has no return path to the chassis the reading must be infinite. An other abnormality exists that must be corrected before the receiver is returned to the customer. Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes -3- LGE Internal Use Only SPECIFICATION NOTE : Specifications and others are subject to change without notice for improvement. 1. Application range This spec sheet is applied all of the 32”, 42”, 47”, 55”, 65” LCD TV with LA22E chassis 2. Test condition Each part is tested as below without special notice. 1) Temperature : 20 ºC ± 5 ºC 2) Relative Humidity: 65 % ± 10 % 3) Power Voltage - AC 110-240 V~, 50/60 Hz * Standard Voltage of each products is marked by models. 4) Specification and performance of each parts are followed each drawing and specification by part number in accordance with BOM. 5) The receiver must be operated for about 5 minutes prior to the adjustment. 3. Test method 1) Performance: LGE TV test method followed 2) Demanded other specification - Safety: CE, IEC specification - EMC: CE, IEC specification - Wireless : WirelessHD Specification (Option) 4. General Specification No Item Specification 1 Receiving System 1) ATSC / NTSC-M 2 Available Channel 1) VHF : 02~13 Remark 2) UHF : 14~69 3) DTV : 02-69 4) CATV : 01~135 5) CADTV : 01~135 3 Input Voltage 1) AC 100 ~ 240V 50/60Hz 4 Market NORTH AMERICA 5 Screen Size 42 inches 6 Aspect Ratio 16:9 7 Tuning System FS 8 Module LC420EUE-SEF1 9 Operating Environment 1) Temp : 0 ~ 40 deg 2) Humidity : ~ 80 % 10 Storage Environment 1) Temp : -20 ~ 60 deg 2) Humidity : ~ 85 % Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes 120V, 50/60Hz on the label (USA) LGD -4- LGE Internal Use Only 5. Supported video resolutions 5.1. 2D mode 5.1.1. Component Video Input (Y, CB/PB, CR/PR) No. Resolution H-freq(kHz) V-freq.(kHz) Pixel clock Proposed 1. 720*480 15.73 60.00 13.5135 SDTV ,DVD 480I 2. 720*480 15.73 59.94 13.50 SDTV ,DVD 480I 3. 720*480 31.50 60.00 27.027 SDTV 480P 4. 720*480 31.47 59.94 27.00 SDTV 480P 5. 1280*720 45.00 60.00 74.25 HDTV 720P 6. 1280*720 44.96 59.94 74.176 HDTV 720P 7. 1920*1080 33.75 60.00 74.25 HDTV 1080I 8. 1920*1080 33.72 59.94 74.176 HDTV 1080I 9. 1920*1080 67.50 60.00 148.50 HDTV 1080P 10. 1920*1080 67.432 59.94 148.352 HDTV 1080P 11. 1920*1080 27.00 24.00 74.25 HDTV 1080P 12. 1920*1080 26.97 23.94 74.176 HDTV 1080P 13. 1920*1080 33.75 30.00 74.25 HDTV 1080P 14. 1920*1080 33.71 29.97 74.176 HDTV 1080P 5.1.2. RGB Input (PC) No. Resolution H-freq(kHz) V-freq.(kHz) Pixel clock Proposed 1 640*350 31.468 70.09 25.17 EGA X 2 720*400 31.469 70.08 28.32 DOS O 3 640*480 31.469 59.94 25.17 VESA(VGA) O 4 800*600 37.879 60.31 40.00 VESA(SVGA) O 5 1024*768 48.363 60.00 65.00 VESA(XGA) O 6 1152*864 54.348 60.053 7 1360*768 47.712 60.015 85.50 VESA (WXGA) X 8 1920*1080 67.5 60.00 148.5 WUXGA(CEA861D) O Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes -5- VESA LGE Internal Use Only 5.1.3. HDMI Input 1 (PC/DTV) No Resolution H-freq(kHz) Pixel clock(MHz) V-freq.(Hz) Proposed Remark PC (DVI) 1 640*350 31.468 70.09 25.17 EGA X 2 720*400 31.469 70.08 28.32 DOS O 3 640*480 31.469 59.94 25.17 VESA(VGA) O 4 800*600 37.879 60.31 40.00 VESA(SVGA) O 5 1024*768 48.363 60.00 65.00 VESA(XGA) O 6 1152*864 54.348 60.053 VESA O 7 1280*1024 63.981 60.020 8 1360*768 47.712 60.015 85.50 9 1920*1080 67.5 60.00 148.5 VESA(SXGA) VESA (WXGA) HDTV 1080P WUXGA(Reduced Blanking) O FHD only DTV 1 720*480 31.50 60.00 27.027 SDTV 480P 2 720*480 31.47 59.94 27.00 SDTV 480P 3 1280*720 45.00 60.00 74.25 HDTV 720P 4 1280*720 44.96 59.94 74.176 HDTV 720P 5 1920*1080 33.75 60.00 74.25 HDTV 1080I 6 1920*1080 33.72 59.94 74.176 HDTV 1080I 7 1920*1080 67.50 60.00 148.50 HDTV 1080P 8 1920*1080 67.432 59.94 148.352 HDTV 1080P 9 1920*1080 27.00 24.00 74.25 HDTV 1080P 10 1920*1080 26.97 23.976 74.176 HDTV 1080P 11 1920*1080 33.75 30.00 74.25 HDTV 1080P 12 1920*1080 33.71 29.97 74.176 HDTV 1080P Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes -6- LGE Internal Use Only 5.2. 3D mode 5.2.1. RF Input No Resolution H-freq(kHz) V-freq.(Hz) Pixel clock(MHz) Proposed Remark 1 1920*1080 45 60 74.25 HDTV 1080I Side by Side, Top & Bottom 2 1280*720 45 60 74.25 HDTV 720P Side by Side, Top & Bottom 5.2.2. USB Input No 1 Resolution 1920*1080 H-freq(kHz) 33.75 V-freq.(Hz) Pixel clock(MHz) 30.00 74.25 Proposed HDTV 1080p Remark Side by Side, Top & Bottom, Checkerboard, MPO (Photo) 5.2.3. RGB-PC Input No 1 Resolution 1920*1080 H-freq(kHz) 66.587 V-freq.(Hz) Pixel clock(MHz) 59.934 138.5 Proposed HDTV 1080p Remark Side by Side, Top & Bottom 5.2.4. DLNA Input No 1 Resolution 1920*1080 H-freq(kHz) 33.75 V-freq.(Hz) Pixel clock(MHz) 30 74.25 Proposed HDTV 1080p Remark Side by Side, Top & Bottom, Checker board 5.2.5. HDMI 1.3 No Resolution H-freq(kHz) V-freq.(Hz) Pixel clock(MHz) Remark 1 1280*720p 45.00 60.00 74.25 Side by Side , Top & Bottom 2 1920*1080i 33.75 60.00 74.25 Side by Side , Top & Bottom 3 1920*1080p 67.50 60.00 148.50 Side by Side , Top & Bottom Checkerboard Single Frame Sequential 4 1920*1080p 27.00 24.000 74.25 Side by Side , Top & Bottom Checkerboard 5 1920*1080p 33.75 30.000 74.25 Side by Side, Top & Bottom Checkerboard Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes -7- LGE Internal Use Only 5.2.6. HDMI 1.4a No Resolution H-freq(kHz) V-freq.(Hz) Pixel clock(MHz) Proposed Remark 1 1280*720p 90.00 60.00 148.50 Mandatory Frame Packing, 2 1280*720p 45.00 60.00 74.25 Mandatory Top & Bottom 3 1920*1080i 33.75 60.00 74.25 Mandatory Side by Side (Half) 4 1920*1080p 54.00 24.000 148.50 Mandatory Frame Packing, 5 1920*1080p 27.00 24.000 74.25 Mandatory Top & Bottom 6 1280*720p 45.00 60.00 74.25 Primary Side by Side (Half) 7 1920*1080i 67.50 60.00 148.50 Primary Frame Packing 8 1920*1080p 67.50 60.00 148.50 Primary Top & Bottom 9 1920*1080p 27.00 24.000 74.25 Primary Side by Side (Half) 10 1920*1080p 67.50 30.000 148.50 Primary Frame Packing, 11 1920*1080p 33.75 30.000 74.25 Primary Top & Bottom 12 1920*1080i 33.75 60.00 74.25 Secondary Top & Bottom 13 1920*1080p 67.50 60.00 148.50 Secondary Side by Side (Half) 14 1920*1080p 33.75 30.000 74.25 Secondary Side by Side (Half) 15 720*480p 63.00 60.00 54.054 Secondary (16:9) Frame Packing, 16 720*480p 31.50 60.00 27.027 Secondary (16:9) Top & Bottom 17 720*480p 31.50 60.00 27.027 Secondary (16:9) Side by Side (Half) 18 720*480p 63.00 60.00 54.054 Secondary (4:3) Frame Packing, 19 720*480p 31.50 60.00 27.027 Secondary (4:3) Top & Bottom 20 720*480p 31.50 60.00 27.027 Secondary (4:3) Side by Side (Half) 21 640*480p 63.00 60.00 50.40 Secondary Frame Packing, 22 640*480p 31.50 60.00 25.20 Secondary Top & Bottom 23 640*480p 31.50 60.00 25.20 Secondary Side by Side (Half) 24 1280*720p 90.00 60.00 148.50 Line Alternative 25 1280*720p 45.00 60.00 148.50 Side by Side (Full) 26 1920*1080i 67.50 60.00 148.50 Field Alternative 27 1920*1080i 33.75 60.00 148.50 Side by Side (Full) 28 1920*1080p 54.00 24.000 148.50 Line Alternative 29 1920*1080p 27.00 24.000 148.50 Side by Side (Full) 30 1920*1080p 67.50 30.000 148.50 Line Alternative 31 1920*1080p 33.75 30.000 148.50 32 720*480p 63.00 60.00 54.054 16:9 Line Alternative 33 720*480p 31.50 60.00 54.054 16:9 Side by Side (Full) 34 720*480p 63.00 60.00 54.054 4:3 Line Alternative 35 720*480p 31.50 60.00 54.054 4:3 Side by Side (Full) 36 640*480p 63.00 60.00 50.40 Line Alternative 37 640*480p 31.50 60.00 50.40 Side by Side (Full) Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes -8- Side by Side (Full) LGE Internal Use Only 5.3. 2D to 3D Mode - Supports this function in all mode. 5.4. Remark: 3D Input mode No. Side by Side Top & Bottom Checkerboard Single Frame Sequential Frame Packing 1 L R R LLLLL R L Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes -9- L LGE Internal Use Only ADJUSTMENT INSTRUCTION 1. Application Range This spec. sheet applies to LA22E Chassis applied LCD TV all models manufactured in TV factory. 2. Specification (1) Because this is not a hot chassis, it is not necessary to use an isolation transformer. However, the use of isolation transformer will help protect test instrument. (2) Adjustment must be done in the correct order. (3) The adjustment must be performed in the circumstance of 25 ±5 °C of temperature and 65±10% of relative humidity if there is no specific designation. (4) The input voltage of the receiver must keep 100~240V, 50/60Hz. (5) The receiver must be operated for about 5 minutes prior to the adjustment when module is in the circumstance of over 15 °C In case of keeping module is in the circumstance of 0°C, it should be placed in the circumstance of above 15°C for 2 hours In case of keeping module is in the circumstance of below -20°C, it should be placed in the circumstance of above 15°C for 3 hours. [Caution] When still image is displayed for a period of 20 minutes or longer (especially where W/B scale is strong. Digital pattern 13ch and/or Cross hatch pattern 09ch), there can some afterimage in the black level area 4. MAIN PCBA Adjustments 4.1. ADC Calibration - An ADC calibration is not necessary because MAIN SoC (LGE35230) is already calibrated from IC Maker - If it needs to adjust manually, refer to appendix. 4.2. M AC Address, ESN Key and Widevine Key download 4.2.1. Equipment & Condition 1) Play file: keydownload.exe 4.2.2. Communication Port connection 1) Key Write: Com 1,2,3,4 and 115200 (Baudrate) 2) Barcode: Com 1,2,3,4 and 9600 (Baudrate) 4.2.3. Download process 1) Select the download items. 2) Mode check: Online Only 3) Check the test process - U S, Canada models: DETECT -> MAC_WRITE -> WIDEVINE_WRITE - K orea, Mexico models: DETECT -> MAC_WRITE -> WIDEVINE_WRITE 4) Play : START 5) Check of result: Ready, Test, OK or NG 4.2.4. Communication Port connection 1) Connect: PCBA Jig -> RS-232C Port == PC -> RS-232C Port 3. Adjustment items 3.1. Main PCBA Adjustments (1) ADC adjustment: Component 480i, 1080p / RGB-PC 1080p (2) EDID downloads for HDMI and RGB-PC 3.2. Final assembly adjustment (1) White Balance adjustment (2) RS-232C functionality check (3) Factory Option setting per destination (4) Shipment mode setting (IN-STOP) (5) GND and HI-POT test 3.3. Appendix (1)Tool option menu, USB Download (S/W Update, Option and Service only) (2) Manual adjustment for ADC calibration and White balance. (3) Shipment conditions, Channel pre-set Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes - 10 - LGE Internal Use Only 4.2.5. Download 1) U S, Canada, Mexico models (11Y LCD TV + MAC + Widevine + ESN Key) 4.3. LAN PORT INSPECTION(PING TEST) 4.3.1. Equipment setting 1) Play the LAN Port Test PROGRAM. 2) Input IP set up for an inspection to Test Program. *IP Number : 12.12.2.2. 4.3.2. LAN PORT inspection (PING TEST) 2) K orea and Philippine models (11Y LCD TV + MAC + Widevine Only) 1) Play the LAN Port Test Program. 2) connect each other LAN Port Jack. 3) Play Test (F9) button and confirm OK Message. 4) remove LAN CABLE 4.2.6. Inspection - In INSTART menu, check these keys. Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes - 11 - LGE Internal Use Only 4.4. EDID Download ⓔ Checksum(LG TV): Changeable by total EDID data. 4.4.1. Overview ⓔ1 - It is a VESA regulation. A PC or a MNT will display an optimal resolution through information sharing without any necessity of user input. It is a realization of “Plug and Play”. 4.4.2. Equipment (1) S ince EDID data is embedded, EDID download JIG, HDMI cable and D-sub cable are not need. (2) Adjust by using remote controller. 4.4.3. Download method (1) Press Adj. key on the Adj. R/C, (2) Select EDID D/L menu. (3) By pressing Enter key, EDID download will begin (4) If Download is successful, OK is display, but If Download is failure, NG is displayed. (5) If Download is failure, Re-try downloads. ※Caution: When EDID Download, must remove RGB/HDMI Cable. ⓔ2 ⓔ3 HDMI1 43 F2 X HDMI2 43 E2 X HDMI3 43 D2 X HDMI4 43 C2 X RGB X X 5C ⓕ Vendor Specific(HDMI) INPUT MODEL NAME(HEX) HDMI1 67 03 0C 00 10 00 80 2D HDMI2 67 03 0C 00 20 00 80 2D HDMI3 67 03 0C 00 30 00 80 2D HDMI4 67 03 0C 00 40 00 80 2D 4.4.4.2. 3D PCM(US) _ XvYcc : 0n 4.4.4. EDID DATA 4.4.4.1. 2D PCM(US) _ XvYcc : 0n ⓐ Product ID ▪Reference - HDMI1 ~ HDMI4 / RGB - In the data of EDID, bellows may be different by S/W or Input mode. ⓐ Product ID HEX EDID Table DDC Function 0001 0100 Analog 0001 0100 Digital ⓑ Serial No: Controlled on production line. ⓒ Month, Year: Controlled on production line: ex) Monthly : ‘01’ -> ‘01’ Year : ‘2012’ -> ‘16’ ⓓ Model Name(Hex): LGTV HEX EDID Table DDC Function Chassis MODEL NAME(HEX) 0001 0100 Analog LA22E 00 00 00 FC 00 4C 47 20 54 56 0A 20 20 20 20 20 20 20 0001 0100 Digital ⓔ Checksum(LG TV): Changeable by total EDID data. ⓑ Serial No: Controlled on production line. ⓒ Month, Year: Controlled on production line: ex) Monthly : ‘01’ -> ‘01’ Year : ‘2012’ -> ‘16’ ⓓ Model Name(Hex): LGTV ⓔ1 ⓔ2 ⓔ3 HDMI1 43 64 X HDMI2 43 54 X HDMI3 43 44 X Chassis MODEL NAME(HEX) HDMI4 43 34 X LA22E 00 00 00 FC 00 4C 47 20 54 56 0A 20 20 20 20 20 20 20 RGB X X 5C Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes - 12 - LGE Internal Use Only ⓕ Vendor Specific(HDMI) INPUT ⓕ Vendor Specific(HDMI) MODEL NAME(HEX) INPUT MODEL NAME(HEX) HDMI1 78 03 0C 00 10 00 80 2D 20 C0 0E 01 4F 00 FE 08 10 06 10 18 10 28 10 38 10 HDMI1 67 03 0C 00 10 00 80 2D HDMI2 78 03 0C 00 20 00 80 2D 20 C0 0E 01 4F 00 FE 08 10 06 10 18 10 28 10 38 10 HDMI2 67 03 0C 00 20 00 80 2D HDMI3 67 03 0C 00 30 00 80 2D HDMI3 78 03 0C 00 30 00 80 2D 20 C0 0E 01 4F 00 FE 08 10 06 10 18 10 28 10 38 10 HDMI4 67 03 0C 00 40 00 80 2D HDMI4 78 03 0C 00 40 00 80 2D 20 C0 0E 01 4F 00 FE 08 10 06 10 18 10 28 10 38 10 4.4.4.4. 3D PCM(US) _XvYcc : off 4.4.4.3. 3D PCM(US) _ XvYcc : 0ff ⓐ Product ID ▪Reference - HDMI1 ~ HDMI4 / RGB - In the data of EDID, bellows may be different by S/W or Input mode. ⓐ Product ID HEX EDID Table DDC Function 0001 0100 Analog 0001 0100 Digital ⓑ Serial No: Controlled on production line. ⓒ Month, Year: Controlled on production line: ex) Monthly : ‘01’ -> ‘01’ Year : ‘2012’ -> ‘16’ ⓓ Model Name(Hex): LGTV HEX EDID Table DDC Function 0001 0100 Analog 0001 0100 Digital ⓑ Serial No: Controlled on production line. ⓒ Month, Year: Controlled on production line: ex) Monthly : ‘01’ -> ‘01’ Year : ‘2012’ -> ‘16’ ⓓ Model Name(Hex): LGTV Chassis MODEL NAME(HEX) LA22E 00 00 00 FC 00 4C 47 20 54 56 0A 20 20 20 20 20 20 20 ⓔ Checksum(LG TV): Changeable by total EDID data. ⓔ1 ⓔ2 ⓔ3 HDMI1 43 68 X Chassis MODEL NAME(HEX) HDMI2 43 58 X LA22E 00 00 00 FC 00 4C 47 20 54 56 0A 20 20 20 20 20 20 20 HDMI3 43 48 X HDMI4 43 38 X RGB X X 5C ⓔ Checksum(LG TV): Changeable by total EDID data. ⓔ1 ⓔ2 ⓔ3 HDMI1 43 B5 X HDMI2 43 A5 X INPUT HDMI3 43 95 X HDMI1 HDMI4 43 85 X 78 03 0C 00 10 00 80 2D 20 C0 0E 01 4F 00 FE 08 10 06 10 18 10 28 10 38 10 RGB X X 5C HDMI2 78 03 0C 00 20 00 80 2D 20 C0 0E 01 4F 00 FE 08 10 06 10 18 10 28 10 38 10 HDMI3 78 03 0C 00 30 00 80 2D 20 C0 0E 01 4F 00 FE 08 10 06 10 18 10 28 10 38 10 HDMI4 78 03 0C 00 40 00 80 2D 20 C0 0E 01 4F 00 FE 08 10 06 10 18 10 28 10 38 10 Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes ⓕ Vendor Specific(HDMI) - 13 - MODEL NAME(HEX) LGE Internal Use Only 5. Final Assembly Adjustment 5.1.4. Adjustment Command (Protocol) (1) RS-232C Command used during auto-adj. 5.1. White Balance Adjustment RS-232C COMMAND 5.1.1. Overview 5.1.1.1. W/B adj. Objective & How-it-works (1) Objective: To reduce each Panel’s W/B deviation (2) H ow-it-works: When R/G/B gain in the OSD is at 192, it means the panel is at its Full Dynamic Range. In order to prevent saturation of Full Dynamic range and data, one of R/G/B is fixed at 192, and the other two is lowered to find the desired value. (3) Adj. condition: normal temperature - Surrounding Temperature: 25±5 °C - Warm-up time: About 5 Min - Surrounding Humidity: 20% ~ 80% - Before White balance adjustment, Keep power on status, don’t power off 5.1.1.2. Adj. condition and cautionary items (1) L ighting condition in surrounding area surrounding lighting should be lower 10 lux. Try to isolate adj. area into dark surrounding. (2) P robe location: Color Analyzer (CA-210) probe should be within 10cm and perpendicular of the module surface (80°~ 100°) (3) Aging time - A fter Aging Start, Keep the Power ON status during 5 Minutes. - In case of LCD, Back-light on should be checked using no signal or Full-white pattern. Explanation CMD DATA ID Wb 00 00 Begin White Balance adj. Wb 00 ff End White Balance adj. (internal pattern disappears ) (2) Adjustment Map Adj. item Cool Medium Warm Command (lower caseASCII) Data Range (Hex.) CMD1 CMD2 MIN MAX R Gain j g 00 C0 G Gain j h 00 C0 B Gain j i 00 C0 R Gain j a 00 C0 G Gain j b 00 C0 B Gain j c 00 C0 R Gain j d 00 C0 G Gain j e 00 C0 B Gain j f 00 C0 5.1.5. Adjustment method 5.1.5.1 Auto WB calibration (1) Set TV in ADJ mode using P-ONLY key (or POWER ON key) (2) Place optical probe on the center of the display - It need to check probe condition of zero calibration before adjustment. (3) Connect RS-232C Cable (4) Select mode in ADJ Program and begin a adjustment. (5) When WB adjustment is completed with OK message, check adjustment status of pre-set mode (Cool, Medium, Warm) (6) Remove probe and RS-232C cable. ▪ W/B Adj. must begin as start command “wb 00 00” , and finish as end command “wb 00 ff”, and Adj. offset if need 5.1.2. Equipment (1) C olor Analyzer: CA-210 (NCG: CH 9 / WCG: CH12 / LED: CH14) (2) A dj. Computer (During auto adj., RS-232C protocol is needed) (3) Adjust Remocon (4) V ideo Signal Generator MSPG-925F 720p/204-Gray (Model: 217, Pattern: 49) ※ Color Analyzer Matrix should be calibrated using CS-1000 5.1.3. Equipment connection 5.1.6. Reference (White Balance Adj. coordinate and color temperature) (1) Luminance: 204 Gray, 80IRE (2) Standard color coordinate and temperature using CS-1000 (over 26 inch) Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes - 14 - LGE Internal Use Only 5.1.7. Reference (White Balance Adj. coordinate and color temperature) ▪ Luminance: 204 Gray ▪ Standard color coordinate and temperature using CS-1000 (over 26 inch) Mode Coordinate X Y Temp △uv Cool 0.269 0.273 13,000K 0.0000 Medium 0.285 0.293 9,300K 0.0000 Warm 0.313 0.329 6,500K 0.0000 Coordinate 5.2.1. Overview (1) Tool option selection is only done for models in Non-USA North America due to rating (2) A pplied model: LA02D and LA02E Chassis applied to CANADA and MEXICO 5.2.2. Country Group selection ▪ S tandard color coordinate and temperature using CA-210(CH 14) (1) LGD and 65”AUO Mode 5.2. T ool Option setting & Inspection per countries Temp △uv X Y Cool 0.269±0.002 0.273±0.002 13,000K 0.0000 Medium 0.285±0.002 0.293±0.002 9,300K 0.0000 Warm 0.313±0.002 0.329±0.002 6,500K 0.0000 (1) Press ADJ key on the Adj. R/C, and then select Country Group Menu (2) Depending on destination, select KR or US, then on the lower Country option, select US, CA, MX. Selection is done using +, - KEY 5.2.3. Tool Option Inspection (1) Press ADJ key on the Adj. R/C, and then select Country Grou (2) O/S Module(AUO, CMI, Sharp,IPS…) Coordinate Mode Tool 1 Tool 2 Tool 3 Tool 4 Tool 5 Tool 6 Tool 7 356 8259 9997 13006 21015 1322 8971 42LS5700UA(AUO) 4454 8259 9997 13006 21143 1322 13067 42LS5700-UA 358 8259 9997 13004 21015 1322 13067 47LS5700UA(AUO) 4455 8259 9997 13006 21143 1322 12555 47LS5700-UA 359 8259 9997 13004 21015 1322 12555 4457 8259 9997 13006 21143 1321 12555 Temp △uv 0.276±0.002 13,000K 0.0000 0.287±0.002 0.296±0.002 9,300K 0.0000 55LS5700UA(AUO) 0.315±0.002 0.332±0.002 6,500K 0.0000 55LS5700-UA 361 8259 9997 13004 21015 1321 12555 60LS5700UA(Sharp) 39274 8259 9997 13006 21015 1321 12555 42LS5750-UB 358 8259 9997 13004 21015 1322 13067 42LS5750UB(AUO) 4454 8259 9997 13006 21143 1322 13067 47LS5750-UB 359 8259 9997 13004 21015 1322 12555 47LS5750UB(AUO) 4455 8259 9997 13006 21143 1322 12555 55LS5750-UB 361 8259 9997 13004 21015 1321 12555 55LS5750UB(AUO) 4457 8259 9997 13006 21143 1321 12555 60LS5750UB(Sharp) 39274 8259 9997 13006 21015 1321 12555 32LM6200-UE 116 8259 26381 13006 23063 1322 8971 X Y Cool 0.271±0.002 Medium Warm ▪ S tandard color coordinate and temperature using CA-210(CH-14) – by aging time (1) Only Kumi factory in Korea (2) Other factories(Only LS5700 series Module & 65LM6200-UA) GP4 Model 32LS5700-UA Aging time (Min) Cool Medium Warm X Y X Y X Y 42LM6200-UE 118 8259 26381 13004 23063 1322 13067 269 273 285 293 313 329 47LM6200-UE 119 8259 26381 13004 23063 1322 12555 1 0-2 280 287 296 307 320 337 55LM6200-UE 121 8259 26381 13004 23063 1321 12555 2 3-5 279 285 295 305 319 335 65LM6200-UB 36987 8259 26381 13006 23063 1321 12427 3 6-9 277 284 293 304 317 334 42LM6210-UD 118 8259 26381 13004 23063 1322 13067 4 10-19 276 283 292 303 316 333 47LM6210-UD 119 8259 26381 13004 23063 1322 12555 5 20-35 274 280 290 300 314 330 47LM6250-UD 119 8259 26381 13004 23063 1322 12555 55LM6250-UD 121 8259 26381 13004 23063 1321 12555 6 36-49 272 277 288 297 312 327 7 50-79 271 275 287 295 311 325 8 80-119 270 274 286 294 310 324 9 Over 120 269 273 285 293 309 323 Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes ● Tool option can be reconstructed by Software - 15 - LGE Internal Use Only 5.3. Local Dimming Inspection (1) P ress ‘TILT” key of the Adj. R/C and check moving patterns. The black bar patterns moves from top to bottom. If a local dimming function does not work, a whole screen shows full white. 5.5. Magic Motion remote controller Check 5.5.1. Test equipment ▪ R F-remote controller for check, IR-KEY-CODE remote controller. ▪ Check AA battery before test. A recommendation is that a tester change battery every lots. 5.5.2. Test (1) Make pairing with TV set by pressing “Start key(Wheel key)” on RCU. (2) Check a cursor on screen by pressing ‘Wheel key” of RCU (3) Stop paring with TV set by pressing “Back+ Home” key of RCU5.5.3. Applied models Chassis Model Name Magic RF receiver LA22E 32/42/47/55LS5700-UA Built-in 42/47/55/65LM6200-UA 32/42/47/55LS5700-UA 42/47/55LM6700-UA 47/55LM7600-UA ※ Except No local-dimming models ※LW5700-UE series: An USB dongle-type receiver will be supplied in form of accessory. So this pairing test is not necessary for these models. 5.4. EYE-Q Check Step 1) Turn on the TV.. Step 2) P ress 'EYE button' on the adjustment remotecontroller. Step 3) Cover 'Eye Q sensor' on the front of set with your hands, hold it for 6 seconds. Step 4) Check "the Sensor Data" on the screen, make certain that Data is below 10. If Data isn’t below 10 in 6 seconds, Eye Q sensor would be bad. You should change Eye Q sensor. Step 5) Uncover your hands from Eye Q sensor, hold it for 6 seconds. Step 6) Check "Back Light(xxx)" on the screen, check data increase . You should change Eye Q sensor. 5.6. Wi-Fi MAC Address Check 5.6.1. Using RS232 Command Transmission Command Set ACK [A][l][][Set ID][][20][Cr] [O][K][x] or [N][G] 5.6.2. Check the menu on in-start Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes - 16 - LGE Internal Use Only 5.7. 3D pattern test (Only for 3D models) 5.8. HDMI ARC Function Inspection 5.7.1. Test equipment (1) P attern Generator MSHG-600 or MSPG-6100 (HDMI 1.4 support) (2) Pattern: HDMI mode (model No. 872, pattern No. 83) 5.7.2. Test method 5.8.1. Test equipment - Optic Receiver Speaker - MSHG-600 (SW: 1220 ↑) - HDMI Cable (for 1.4 version) 5.8.2. Test method (1) Input 3D test signal as Fig.1. (1) Insert the HDMI Cable to the HDMI ARC port from the master equipment (HDMI1) (2) Check the sound from the TV Set (2) Press ‘OK” key as a 3D input OSD is shown. (3) C heck pattern as Fig2 without 3D glasses. (3D mode without 3D glasses) (3) Check the Sound from the Speaker or using AV & Optic TEST program (It’s connected to MSHG-600) Fig.2 Fig.3 * Remark: Inspect in Power Only Mode and check SW version in a master equipment 5.9. Ship-out mode check (In-stop) ▪ After final inspection, press In-Stop key of the Adj. R/C and check that the unit goes to Stand-by mode Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes - 17 - LGE Internal Use Only 6. AUDIO output check 8. USB S/W Download (optional, Service only) 6.1. Audio input condition (1) RF input: Mono, 1KHz sine wave signal, 100% Modulation (2) CVBS, Component: 1KHz sine wave signal (0.4Vrms) (3) RGB PC: 1KHz sine wave signal (0.7Vrms) (1) Put the USB Stick to the USB socket (2) Automatically detecting update file in USB Stick - If your downloaded program version in USB Stick is lower than that of TV set, it didn’t work. Otherwise USB data is automatically detected. (3) Show the message “Copying files from memory” 6.2. Specification No 1 Item Min Typ Max Unit Audio 9.0 10.0 12.0 W practical 8.5 8.9 9.9 Vrms max Output, L/R Remark (1) Measurement condition -E Q/AVL/Clear Voice: Off (2) Speaker (8Ω Impedance) 7. GND and HI-POT Test (4) Updating is staring. 7.1. GND & HI-POT auto-check preparation (1) C heck the POWER CABLE and SIGNAL CABE insertion condition 7.2. GND & HI-POT auto-check (1) P allet moves in the station. (POWER CORD / AV CORD is tightly inserted) (2) Connect the AV JACK Tester. (3) Controller (GWS103-4) on. (4) GND Test (Auto) - If Test is failed, Buzzer operates. - If Test is passed, execute next process (Hi-pot test). (Remove A/V CORD from A/V JACK BOX) (5) HI-POT test (Auto) - If Test is failed, Buzzer operates. - If Test is passed, GOOD Lamp on and move to next process automatically. 7.3. Checkpoint (1) Test voltage - GND: 1.5KV/min at 100mA - SIGNAL: 3KV/min at 100mA (2) TEST time: 1 second (3) TEST POINT - GND Test = POWER CORD GND and SIGNAL CABLE GND. - Hi-pot Test = POWER CORD GND and LIVE & NEUTRAL. (4) LEAKAGE CURRENT: At 0.5mArms Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes - 18 - (5) Updating Completed, The TV will restart automatically (6) If your TV is turned on, check your updated version and Tool option. * If downloading version is more high than your TV have, TV can lost all channel data. In this case, you have to channel recover. If all channel data is cleared, you didn’t have a DTV/ ATV test on production line. * After downloading, TOOL OPTION setting is needed again. (1) Push "IN-START" key in service remote controller. (2) Select "Tool Option 1" and Push “OK” button. (3) Punch in the number. (Each model has their number.) LGE Internal Use Only 9. Optional adjustments 9.2. Manual White balance Adjustment 9.2.1. Adj. condition and cautionary items 9.1. Manual ADC Calibration (1) Lighting condition in surrounding area surrounding lighting should be lower 10 lux. Try to isolate adj. area into dark surrounding. (2) Probe location: Color Analyzer (CA-210) probe should be within 10cm and perpendicular of the module surface (80°~ 100°) (3) Aging time ▪ A fter Aging Start, Keep the Power ON status during 5 Minutes. ▪ In case of LCD, Back-light on should be checked using no signal or Full-white pattern. 9.1.1. Equipment & Condition (1) Adjustment Remocon (2) 8 01GF (802B, 802F, 802R) or MSPG925FA Pattern Generator - Resolution : 4 80i Comp1 (MSPG-925FA: model-209, pattern-65) - Resolution : 1 080p Comp1 (MSPG-925FA: model-225, pattern-65) - Resolution : 1 080p RGB (MSPG-925FA: model-225, pattern-65) - Pattern : Horizontal 100% Color Bar Pattern - Pattern level : 0.7±0.1 Vp-p 9.2.2. Equipment (1) Color Analyzer: CA-210 (NCG: CH 9 / WCG: CH12 / LED: CH14) (2) A dj. Computer (During auto adj., RS-232C protocol is needed) (3) Adjust Remocon (4) V ideo Signal Generator MSPG-925F 720p/216-Gray (Model: 217, Pattern: 78) 9.1.2. Adjust method 8.1.2.1 ADC 480i/1080p Comp1, RGB (1) C heck connected condition of Comp1/RGB cable to the equipment (2) G ive a 480i Mode, Horizontal 100% Color Bar Pattern to Comp1. (MSPG-925FA -> Model: 209, Pattern: 65) (3) C hange input mode as Component1 and picture mode as “Standard” (4) P ress the In-start Key on the ADJ remote after at least 1 min of signal reception. Then, select 7.External ADC. And Press OK or Right Button for going to sub menu. (5) Press OK in Comp 480i menu (6) G ive a 1080p Mode, Horizontal 100% Color Bar Pattern to Comp1. (MSPG-925FA -> Model: 225, Pattern: 65) (7) Press OK in Comp 1080p menu (8) Perform (6) and (7) in RGB-PC (9) If ADC Comp is successful, “ADC Component Success” is displayed. If ADC calibration is failure, “ADC Component Fail” is displayed. (10) If ADC calibration is failure, after rechecking ADC pattern or condition, retry calibration (11) I f ADC RGB calibration is successful, “ADC RGB Success” is displayed. If ADC calibration is failure, “ADC RGB Fail” is displayed. (12) If ADC calibration is failure, after recheck ADC pattern or condition, retry calibration Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes 9.2.3. Adjustment - 19 - (1) Set TV in Adj. mode using POWER ON (2) Zero Calibrate the probe of Color Analyzer, then place it on the center of LCD module within 10cm of the surface. (3) Press ADJ key -> EZ adjust using adj. R/C -> 6. WhiteBalance then press the cursor to the right (KEY►). W hen KEY(►) is pressed 216 Gray internal pattern will be displayed. (4) One of R Gain / G Gain / B Gain should be fixed at 192, and the rest will be lowered to meet the desired value. (5) Adj. is performed in COOL, MEDIUM, WARM 3 modes of color temperature. ▪ If internal pattern is not available, use RF input. In EZ Adj. menu 6.White Balance, you can select one of 2 Test-pattern: ON, OFF. Default is inner(ON). By selecting OFF, you can adjust using RF signal in 216 Gray pattern. LGE Internal Use Only SCREW WORKING GUIDE ■ Screw specification and application situation A A A • FAB31339402 A (M3*L4.5, BK, Machine) A • 11EA A B B A A B C C B C C C ※ Warning A • FAB30078812 (M6*L10, BK, Machine) 4EA Check Screw Type When Screw is assembled A at A Part. If C Screw is used at the A part Module will get damaged A C C C • FAB31339201 (M3*L10, BK, Taptite) • 8EA • FAB30016122 (M4*L20, BK, Taptite) • 4EA Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes D D - 20 - D D LGE Internal Use Only EXPLODED VIEW IMPORTANT SAFETY NOTICE 900 WM1 300 A22 120 AG1 200 800 LV1 530 810 540 521 400 910 Many electrical and mechanical parts in this chassis have special safety-related characteristics. These parts are identified by in the Schematic Diagram and EXPLODED VIEW. It is essential that these special safety parts should be replaced with the same components as recommended in this manual to prevent X-RADIATION, Shock, Fire, or other Hazards. Do not modify the original design without permission of manufacturer. Copyright © LG Electronics. Inc. All rights reserved. Only for training and service purposes - 21 - LGE Internal Use Only EAX6430790* : LD22* / LC22* EAX6443420* : LT22* / LJ22* / LA22* / LB22* Crystal Matching Test result : 27pF -> 20pF -> 24pF IC104-*1 M24256-BRMN6TP NVRAM +3.3V_NORMAL E0 E1 E2 R103 4.7K R105 4.7K OPT R104 VSS 8 2 7 3 6 4 5 A1 A2 1 8 2 7 3 6 X-TAL IC104-*2 R1EX24256BSAS0A VCC A0 WC A1 SCL A2 SDA VSS NVRAM_ST A0 4.7K OPT +3.3V_NORMAL IC104 AT24C256C-SSHL-T 1 1 8 2 7 3 6 4 5 +3.3V_NORMAL VCC WP JTAG NVRAM_RENESAS AR100 10K R146 10K MTK_JTAG R152 MTK_JTAG P100 1K 12507WS-12L 33 2 JTRST# I2C_SCL5 JTDI 3 JTMS 4 0 EMMC_CLK 1 - Low : Normal Operation - High : Write Protection R136 MT5369_XTAL_OUT C115 24pF C113 24pF Close to eMMC Flash (IC8100) MTK_JTAG SDA Write Protection SCL IC R119 MT5369_XTAL_IN SCL VCC WP X100 27MHz +3.3V_NORMAL R174 10K MT5369_NON_RM IC105 LGE2112 +3.3V_NORMAL GND 4 5 SDA R137 33 5 JTCLK I2C_SDA5 6 R143 JTDO NVRAM_ATMEL 33 JTCLK 7 MTK_JTAG AM14 JTDI 8 +3.3V_NORMAL AP14 AR14 JTDO AR15 9 JTMS R144 10K HDCP EEPROM IC100-*1 24LC16B A0 1 NC_2 NC_3 8 1 2 7 C101 0.1uF 16V VCC WC R181 OSDA0 12 R145 10K MTK_JTAG VCC A1 2 7 WP A2 3 6 SCL VSS 4 5 SDA R149 10K MTK_JTAG 3 6 SCL R191 22 5 SDA R192 22 AN12 OSCL0 13 U0RX JTDO SOC_TX AP18 R165 4.7K SOC_RX R167 4.7K AU16 JTMS U1RX JTRST U1TX M_REMOTE_RX AT16 M_REMOTE_TX OSDA0 POWE POOE OSCL0 AN15 MT5369_XTAL_IN MT5369_XTAL_OUT AVDD_33SB POCE1 OSDA1 POCE0 OSCL1 PDD7 PDD6 AT34 AU34 XTALI PDD5 XTALO PDD4 PDD3 AK27 AH26 C116 0.1uF I2C_SCL1 A35 AP15 OSCL1 4.7K VSS 4 U0TX JTDI AP12 OSDA1 HDCP_EEPROM_ST IC100 M24C16-R 8 AN14 JTRST# JTCK 11 HDCP_EEPROM_MICRO +3.3V_NORMAL NC_1 10 AR18 AVDD33_XTAL_STB PDD2 AVSS33_XTAL_STB PDD1 PDD0 I2C_SDA1 PARB AVDD_33SB +3.3V_NORMAL PACLE AK18 C117 0.1uF AK17 AVDD33_VGA_STB PAALE AVSS33_VGA_STB EMMC_CLK EMMC_CMD C33 B34 EMMC_DATA[2-7] D33 D29 EMMC_DATA[7] C30 EMMC_DATA[6] D30 EMMC_DATA[5] B31 EMMC_DATA[4] A31 EMMC_DATA[3] B32 EMMC_DATA[2] +3.3V_NORMAL R157 4.7K OPT A32 C32 D32 A34 R178 4.7K OPT EMMC_DATA[1] C34 EMMC_DATA[0] C29 EMMC_CLK +3.3V_NORMAL AM20 R147 1K OPT R150 1K STRAPPING R153 1K OPT LED_PWM0 LED_PWM0 LED_PWM1 OPWRSB OPCTRL3 ICE mode + 27M + Serial boot 0 0 0 ICE mode + 27M + ROM to Nand boot 0 0 1 VDD3V3 AM22 AK23 C118 0.1uF AM27 AVDD33_PLLGP R154 1K ICE mode + 27M + Rom to eMMC boot from eMMC pins (share pins w/s NAND) 0 ICE mode + 27M + ROM to eMMC boot from SDIO pins 0 1 D27 AJ20 AVDD10_LDO 1 C107 2.2uF 10V 1 C108 2.2uF 10V I2C +3.3V_NORMAL IC105-*1 LGE2112-AL AMP, L/DIMMING,HDCP KEY T-CON MICOM S/Demod,T2/Demod, LNB NVRAM TUNER_MOPLL(T/C,ATV) AC1 CI_ADDR[0] H32 CI_ADDR[1] F37 CI_ADDR[2] F36 CI_ADDR[3] G37 CI_ADDR[4] G36 CI_ADDR[5] G35 AC2 A3 A4 B4 C4 D4 B3 C3 AC3 AC4 ARDQM0 DDRV_45 ARDQS0 DDRV_1 ARDQS0 DDRV_2 ARDQ0 DDRV_5 ARDQ1 DDRV_8 ARDQ2 DDRV_10 ARDQ3 DDRV_4 ARDQ4 DDRV_7 ARDQ5 DDRV_46 ARDQ6 R134 2.7K R139 2.7K R142 2.7K R173 2.7K R185 2.7K ARDQM1 ARDQS1 ARDQS1 RVREF_B ARDQ8 RVREF_A ARDQ9 ARDQ11 F10 R188 2.7K R156 2.7K R160 2.7K ARDQ12 ARCKE R164 2.7K R177 2.7K ARDQ13 D9 C9 ARCLK1 ARDQ14 ARCLK1 ARDQ15 ARCLK0 ARDQM2 ARCLK0 ARDQS2 ARODT ARDQ16 A20 A21 STB_SCL STB_SDA R110 R111 33 I2C_SCL1 33 E17 I2C_SDA1 E16 D14 OPCTRL_11_SCL R112 33 I2C_SCL2 OPCTRL_10_SDA R113 33 I2C_SDA2 OSCL1 R114 I2C_SCL3 R115 33 I2C_SDA3 OSCL2 R116 33 OSDA2 R117 ARRAS ARDQ17 ARCAS ARDQ18 ARCS ARDQ19 ARWE ARDQ20 ARRESET ARDQ22 ARDQ21 B14 D16 ARBA0 ARDQM3 ARBA2 ARDQS3 ARDQS3 F13 C14 33 I2C_SDA4 OSCL0 R118 33 I2C_SCL5 OSDA0 R121 33 I2C_SDA5 F11 E15 D13 B15 E14 OPCTRL_1_SCL R122 33 I2C_SCL6 OPCTRL_0_SDA R123 33 I2C_SDA6 ARDQ24 ARCSX ARDQ25 C15 I2C_SCL4 F16 E13 B13 A14 F14 F15 SOC -> CI SLOT C23 B17 CI_ADDR[8] L34 CI_ADDR[9] L32 CI_ADDR[10] K33 D23 MT5369_MCLKI MT5369_MIVAL_ERR C17 D24 C16 C24 CI_ADDR[11] K32 CI_ADDR[12] H33 CI_ADDR[13] L35 CI_ADDR[14] K36 D15 MT5369_MISTRT B20 C20 A17 A23 SOC -> CI SLOT D17 B23 D20 J32 MT5369_TS_OUT[0-7] D22 J34 D19 C22 K34 B9 MT5369_TS_OUT[0] A9 K35 C12 D6 MT5369_TS_OUT[1] B12 K37 C5 C13 MT5369_TS_OUT[2] J36 MT5369_TS_OUT[3] J37 A5 A12 B5 E10 ARBA1 F18 A15 H34 ARDQ23 A13 G11 33 OSDA1 CI_ADDR[7] A7 ARDQS2 E18 F17 G34 D21 MEMTP MEMTN ARDQ10 R131 1.2K C21 B21 ARDQ7 DDRV_47 G9 G13 G21 CI_ADDR[6] C19 DDRV_44 G10 R128 1.2K ARA14 ARDQ26 ARA13 ARDQ27 ARA12 ARDQ28 ARA11 ARDQ29 ARA10 ARDQ30 ARA9 ARDQ31 D8 C6 CI_DATA[0-7] D10 D7 ARA7 C7 ARA5 AVSS33_MEMPLL ARA3 DVSS_48 H35 CI_DATA[0] H31 CI_DATA[1] F34 N15 R1 DVSS_50 ARA1 G33 B7 B10 ARA4 ARA2 J33 MT5369_TS_OUT[6] MT5369_TS_OUT[7] C10 N14 AVDD33_MEMPLL J35 MT5369_TS_OUT[5] C11 ARA8 ARA6 MT5369_TS_OUT[4] C8 P21 ARA0 CI_DATA[2] E36 CI_DATA[3] N33 CI_DATA[4] P32 CI_DATA[5] M35 CI_DATA[6] M37 CI_DATA[7] M33 F35 MT5369_TS_IN[0] E35 MT5369_TS_IN[1] Model Option +3.3V_NORMAL CI SLOT -> SOC E37 MT5369_TS_IN[2] MT5369_TS_IN[3] N32 M34 MT5369_TS_IN[4] M36 M32 NO_FRC MTK_EPI R189 4.7K MTK_DVB_C2_TUNER R186 4.7K MT5369_TS_IN[6] MT5369_TS_IN[7] MTK_DVB_S_TUNER R175 4.7K MTK_DVB_T2_TUNER R140 4.7K MTK_CP_BOX R135 4.7K MTK_DDR_768MB R132 4.7K MTK_3D_DEPTH_IC R130 4.7K MTK_OPTIC_Tx_IC R125 4.7K MTK_FHD R108 4.7K MTK_Int_FRC/URSA5 R106 4.7K MTK_FRC3/URSA5 R101 4.7K MT5369_TS_IN[5] SoC internal FRC LG FRC2 Reserved MODEL_OPT_0 0 0 1 1 MODEL_OPT_1 0 1 0 1 L33 /USB_OCD2 E33 /USB_OCD1 E32 /USB_OCD3 F32 A29 USB_CTL2 D31 USB_CTL1 C31 USB_CTL3 EPI_LOCK6 MODEL_OPT_0 MODEL_OPT_0 MODEL_OPT_1 HIGH C100 C102 C103 C105 C106 C104 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF OPT OPT OPT OPT OPT OPT LOW MODEL_OPT_2 HD FHD MODEL_OPT_2 MODEL_OPT_3 MODEL_OPT_9 MODEL_OPT_10 Reserved EPI Default Support Not Support M104 MODEL_OPT_10 MDS61887710 Not Support M103 Support MTK_H/S_9.5T S Tuner M102 MODEL_OPT_8 Disable Not Support MDS62110213 Support MDS62110213 Enable T2 Tuner MTK_H/S_3.5T CP BOX MODEL_OPT_7 MODEL_OPT_3 M_RFModule_ISP MODEL_OPT_5 MODEL_OPT_6 HEAT SINK SMD GASKET DDR_Default M101 MODEL_OPT_6 ERROR_OUT SC_ID_SOC MTK_H/S_3.5T MODEL_OPT_7 DDR_768MB MODEL_OPT_1 MODEL_OPT_7 NON_OPTIC NON_3D_Depth_IC MDS62110213 MODEL_OPT_9 MTK_NON_EPI R190 4.7K MTK_NON_DVB_C2_TUNER R187 4.7K MTK_NON_DVB_S_TUNER R184 4.7K MTK_NON_DVB_T2_TUNER R141 4.7K MTK_NON_CP_BOX R138 4.7K MTK_DDR_DEFAULT R133 4.7K MTK_NON_3D_DEPTH_IC R129 4.7K MTK_NON_OPTIC_Tx_IC R127 4.7K MTK_HD R109 4.7K MTK_NO_FRC/FRC3 R107 4.7K MTK_NO_FRC/Int_FRC R102 4.7K M_RFModule_ISP MODEL_OPT_8 DDR 3D_Depth_IC M100 MODEL_OPT_5 3D DEPTH MTK_H/S_3.5T MODEL_OPT_4 MODEL_OPT_6 OPTIC MODEL_OPT_3 MTK_H/S_3.5T MODEL_OPT_4 MDS62110213 /S2_RESET MODEL_OPT_5 33 R159 OPT 4.7K AT21 STB_SCL E30 E31 F31 E29 AP9 AT9 AR9 AU9 DEMOD_TSCLK GPIO2 DEMOD_TSDATA0 GPIO3 DEMOD_TSDATA1 GPIO4 DEMOD_TSDATA2 GPIO5 DEMOD_TSDATA3 GPIO6 DEMOD_TSDATA4 GPIO7 DEMOD_TSDATA5 GPIO8 DEMOD_TSDATA6 GPIO9 DEMOD_TSDATA7 GPIO11 DEMOD_TSSYNC CI_INT GPIO14 CI_TSCLK GPIO15 CI_TSDATA0 GPIO16 CI_TSSYNC GPIO17 CI_TSVAL GPIO18 AN23 R176 10K AN24 R162 10K AP23 R163 10K AR23 M_RFModule_RESET OPC_EN /TU_RESET /S2_RESET AU23 AT23 AM24 AM23 FE_TS_CLK T36 FE_TS_DATA[0] U36 FE_TS_DATA[1] T33 FE_TS_DATA[2] T30 FE_TS_DATA[3] V33 FE_TS_DATA[4] V32 FE_TS_DATA[5] V31 FE_TS_DATA[6] PVR_TSVAL GPIO21 PVR_TSSYNC GPIO22 PVR_TSDATA0 GPIO23 PVR_TSDATA1 GPIO24 T35 FE_TS_SYNC T31 FE_TS_VAL /PCM_REG T37 /PCM_CE1 MT5369_TS_SYNC CI SLOT -> SOC /PCM_WE R35 R37 R36 /PCM_OE GPIO26 SPI_CLK GPIO27 SPI_DATA GPIO28 SPI_CLE GPIO29 MT5369_TS_VAL CI SLOT -> SOC CI_A_VS1 R32 R33 MT5369_TS_CLK CI SLOT -> SOC /PCM_IRQA P33 P34 N37 SPI_CLK1 P35 N34 N35 /PCM_WAIT +3.3V_NORMAL /CI_CD2 /CI_CD1 /PCM_IORD /PCM_IOWR R161 4.7K OPT R171 R168 4.7K OPT R166 2.7K OPT AU12 GPIO30 OPWM2 GPIO31 OPWM1 GPIO32 OPWM0 AR12 R169 A37 GPIO34 SD_D0 GPIO35 SD_D1 GPIO36 SD_D2 GPIO37 SD_D3 GPIO38 SD_CMD GPIO39 SD_CLK 10K A36 SMARTCARD_RST B35 R170 LDM_CS GPIO43 LDM_CLK GPIO44 LDM_VSYNC GPIO45 LDM_DO GPIO46 LDM_DI PWM_DIM1 R126 1K SMARTCARD_DET B36 SMARTCARD_VCC B37 SMARTCARD_CLK SMARTCARD_PWR_SEL SMARTCARD_DATA FOR JAPAN SMARTCARD_RST SMARTCARD_DET AT11 GPIO42 PWM_DIM2 A_DIM C120 2.2uF 10V OPT PWM2_PULL_DOWN_1K PWM1_PULL_DOWN_1K R120 1K SMARTCARD_CLK SMARTCARD_PWR_SEL C35 GPIO40 GPIO41 22 22 AT12 OPT GPIO33 EXTERNAL DEMOD -> SOC FE_TS_DATA[7] V30 R34 PVR_TSCLK GPIO20 GPIO25 FE_TS_DATA[0-7] PCM_RST T32 N36 GPIO13 GPIO19 C114 0.1uF 16V STB_SDA DEMOD_TSVAL GPIO12 SMARTCARD_VCC AU11 L/DIM0_SCLK AR10 SMARTCARD_DATA L/DIM0_VS AM9 FOR JAPAN L/DIM0_MOSI AP10 GPIO47 GPIO48 AN22 GPIO49 LED_PWM1 GPIO50 LED_PWM0 LED_PWM1 AP21 LED_PWM0 GPIO51 GPIO52 5V Tolerance GPIO53 AU20 GPIO54 OPCTRL11 GPIO55 OPCTRL10 OPCTRL9 NON_EU R193 10K MODEL_OPT_4 DEMOD_RST GPIO1 GPIO10 SOC_RESET 22 STB_SCL AR21 T34 GPIO0 R172 IR FSRC_WR STB_SDA MT5369_RM : : : : : : R158 0 CI_ADDR[0-14] I2C_1 I2C_2 I2C_3 I2C_4 I2C_5 I2C_6 AU21 OIRI OPCTRL3 R151 1K OPT R148 1K R155 10K OPT ORESET AVSS33_PLLGP LED_PWM1 OPCTRL8 ADIN0_SRV OPCTRL7 ADIN1_SRV OPCTRL6 ADIN2_SRV OPCTRL5 ADIN3_SRV OPCTRL4 ADIN4_SRV OPCTRL3 ADIN5_SRV OPCTRL2 ADIN6_SRV OPCTRL1 ADIN7_SRV OPCTRL0 OPCTRL_11_SCL AT20 OPCTRL_10_SDA AN18 COMP1_DET AP20 SC_DET AM18 DSUB_DET AN19 HP_DET AP19 AV1_CVBS_DET AR19 AMP_RESET_SOC AN21 OPCTRL3 AM19 RF_SWITCH_CTL AN20 OPCTRL_1_SCL AR20 OPCTRL_0_SDA MODEL OPTION 8 is just for CP Box It should not be appiled at MP R124 AMP_RESET_SOC 33 AMP_RESET_BY_SOC THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes MID_MAIN_1 AMP_RESET_N R100 10K AMP_RESET_BY_SOC 2011.12.13 8 LGE Internal Use Only PLACE AT JACK SIDE C319 10uF 16V 1608 sizs For EMI R314 PC_L_IN PC_L_IN_SOC 1608 sizs For EMI R333 0 R300 C300 560pF 50V OPT 470K OPT C314 100pF 50V OPT AV1_CVBS_IN AV1_CVBS_IN_SOC 1608 sizs For EMI R336 120-ohm C344 27pF 50V OPT ZD300 5.48VTO5.76V C320 10uF 16V ZD301 5.48VTO5.76V C348 100pF 50V R330 75 1% C340 47pF 50V PC_R_IN_SOC PC_R_IN 1.0Vpp 0 1608 sizs For EMI 0 COMP1_Y C315 100pF 50V OPT C301 560pF 50V OPT R301 470K OPT ZD303 5.48VTO5.76V C345 10uF 16V 1608 sizs For EMI R344 AV1_L_IN 30K COMP1_Pb R328 C338 560pF 50V OPT 470K OPT C342 100pF 50V C386 27pF 50V OPT ZD304 5.48VTO5.76V ZD305 5.48VTO5.76V 10V R302 180 C311 ARC DSUB_VSYNC R308 1.2K OPT 1uF C329 5pF 50V OPT HDMI_ARC R324 22 COMP1_Y_SOC C394 27pF 50V OPT C384 10pF 50V R355 75 1% 1608 sizs For EMI 0 R373 AV1_L_IN_SOC +5V_NORMAL R374 C388 27pF 50V OPT ZD302 5.48VTO5.76V C391 27pF 50V OPT COMP1_Pb_SOC R354 75 1% C379 10pF 50V DSUB_VSYNC_SOC OPT R325 2K C346 10uF 16V 1608 sizs For EMI R345 AV1_R_IN 1608 sizs For EMI 0 R372 COMP1_Pr AV1_R_IN_SOC COMP1_Pr_SOC 30K R303 82 R309 100K DSUB_HSYNC C330 5pF 50V OPT R323 22 C339 560pF 50V OPT R329 470K OPT DSUB_HSYNC_SOC OPT R326 2K C343 100pF 50V C385 27pF 50V FOR EMI OPT ZD306 5.48VTO5.76V ZD307 5.48VTO5.76V C392 27pF 50V OPT R353 75 1% C378 10pF 50V IC105 LGE2112 IC105 LGE2112 CHANGE SYMBOL AA32 AE33 AC33 DDC_SCL_1_SOC AH32 DDC_SCL_4_JACK AD33 AB33 DDC_SDA_1_SOC DDC_SDA_4_JACK 5V_HDMI_3_JACK 5V_HDMI_1_SOC 5V_HDMI_4_JACK AH33 R304 1K AG31 R305 1K AE31 R306 1K AC31 R307 1K AH31 HDMI_0_RX_1 HDMI_1_SCL HDMI_0_RX_1B HDMI_2_SCL HDMI_0_RX_2 HDMI_3_SCL HDMI_0_RX_2B HDMI_0_SDA HDMI_0_RX_CB HDMI_0_RX_C HDMI_1_SDA HDMI_1_RX_0 HDMI_3_SDA HDMI_1_RX_0B HDMI_0_PWR5V HDMI_1_RX_1B HDMI_1_RX_1 HDMI_1_PWR5V HDMI_1_RX_2 HDMI_2_PWR5V HDMI_1_RX_2B HDMI_3_PWR5V HDMI_1_RX_C AE32 AC32 HDMI_HPD_1_SOC HDMI_HPD_4_JACK AJ32 HDMI_2_RX_0 HDMI_2_HPD HDMI_2_RX_0B HDMI_3_HPD HDMI_2_RX_1 HDMI_2_RX_1B AA24 Y24 C306 0.1uF C303 0.1uF W24 AB24 AVDD12_HDMI_0_RX HDMI_2_RX_2 AVDD12_HDMI_1_RX HDMI_2_RX_2B AVDD12_HDMI_2_RX HDMI_2_RX_C AVDD12_HDMI_3_RX HDMI_2_RX_CB AB29 VDD3V3 AA29 Y29 AC29 C304 0.1uF C307 0.1uF AF31 AF32 AG36 HDMI_3_RX_0 AVDD33_HDMI_1_RX HDMI_3_RX_0B AVDD33_HDMI_2_RX HDMI_3_RX_1 AVDD33_HDMI_3_RX HDMI_3_RX_1B HDMI_3_RX_2 AVSS33_HDMI_RX_1 HDMI_3_RX_2B AVSS33_HDMI_RX_2 HDMI_3_RX_C AVSS33_HDMI_RX_3 HDMI_3_RX_CB AO4N AO4P D1-_HDMI2_JACK AF35 AOCLKN D2+_HDMI2_JACK AF34 AOCLKP D2-_HDMI2_JACK AH35 AO2N CK+_HDMI2_JACK AH34 AO2P CK-_HDMI2_JACK AD34 E27 MODEL_OPT_9 D0-_HDMI3_JACK D1+_HDMI3_JACK AD35 F30 MODEL_OPT_10 F29 GCLK_SOC D1-_HDMI3_JACK B27 MCLK_SOC AC35 D2+_HDMI3_JACK AC34 B28 EO_SOC CK+_HDMI3_JACK AE34 A27 GST_SOC D2-_HDMI3_JACK AE35 A28 VCOM_DYN CK-_HDMI3_JACK C28 PMIC_RESET D28 2D/3D_CTL D0+_HDMI1_SOC AB34 E28 MODEL_OPT_2 D0-_HDMI1_SOC D1+_HDMI1_SOC AA35 AA34 AA37 F28 PCM_5V_CTL B29 EMMC_RST D1-_HDMI1_SOC USB_DM3 USB_DP2 Port was changed !!!! USB_DM2 WIFI_DP WIFI_DM USB_DP1 VDD3V3 USB_DM1 AO1P AO0N TCON2 AO0P TCON3 AE4N TCON5 AE4P TCON6 AE3N TCON7 AE3P TCON8 AECLKN TCON9 AECLKP TCON10 AE2N TCON11 AE2P TCON12 AE1N +1.2V_MTK_AVDD AE1P AE0N AC36 C350 0.1uF CK-_HDMI1_SOC AK34 AJ35 AJ34 C354 0.1uF AJ36 AJ33 AK33 AF6 AE6 D0-_HDMI4_JACK D1+_HDMI4_JACK AH7 C347 0.1uF D1-_HDMI4_JACK AJ37 AJ6 VDD3V3 D0+_HDMI4_JACK AVDD12_LVDS_1 AG5 D2-_HDMI4_JACK AF5 CK+_HDMI4_JACK AE5 CK-_HDMI4_JACK AH5 BO4N AVDD12_VPLL BO4P AVDD33_LVDSB BO3N AVDD33_LVDSA BO3P BOCLKN AVSS12_LVDS_2 BOCLKP AVSS12_LVDS_1 BO2N AVSS12_VPLL BO2P AVSS33_LVDSB BO1N AVSS33_LVDSA BO1P BO0N AG7 REXT_VPLL USB_DP_P0 D37 BE4P USB_DP_P1 BE3N USB_DM_P1 BE3P AT13 BECLKN USB_DP_P2 BECLKP USB_DM_P2 BE2N AT14 AU14 USB_DP_P3 USB_DM_P3 SC_R_IN_SOC BE2P SC_L_IN_SOC BE1N BE1P D35 AP13 BE0N AVDD33_USB_P0P1 AU37 AU35 AVSS33_USB_P1 AVSS33_USB_P2 PC_R_IN_SOC W35 +1.2V_MTK_AVDD W34 Y34 Y35 VDD3V3 C316 0.1uF AT18 PCIE11_TXP TXVP_0 PCIE11_TXN TXVN_0 PCIE11_RXN RXVN_1 AVDD12_PCIE11 PHYLED1 R310 30K AT37 AU36 AP34 R338 AV1_R_IN_SOC EPHY_RDN AT36 0 R337 AV1_L_IN_SOC EPHY_RDP AR37 0 AR33 AP32 AR36 AM16 AP37 PHYLED0 W30 AVSS12_PCIE11 AD15 REXT W36 W37 AT35 AN16 AVDD33_PCIE11 C308 0.1uF 30K EPHY_TDN AT17 RXVP_1 U24 V24 AU18 AU17 PCIE11_RXP R311 PC_L_IN_SOC EPHY_TDP PCIE11_REFCKN 24K +1.2V_MTK_AVDD AR35 R315 AP36 AD14 PCIE11_REFCKP AVDD12_REC AD16 AVDD33_COM AD17 AVDD33_LD C323 0.1uF VDD3V3 AR0_ADAC AIN0_L_AADC AL0_ADAC AIN1_L_AADC AR1_ADAC AIN2_R_AADC AL1_ADAC AIN2_L_AADC AIN3_R_AADC AR2_ADAC AIN3_L_AADC AL2_ADAC AIN4_R_AADC AIN4_L_AADC AR3_ADAC AIN5_R_AADC C362 0.1uF AJ28 AVDD33_DAC AIN6_L_AADC AVDD33_DAC1 C352 Close to Tuner ASPDIF0 IF_N R331 0 T/C&AT&CHB C358 0.01uF 50V AOMCLK C363 1uF 25V AOSDATA4 AOSDATA3 AOSDATA2 51 AOSDATA1 1uF R335 AU32 51 AT32 T/C&AT&CHB VDD3V3 HSYNC ADCINN_DEMOD VSYNC RP AVDD33_DEMOD BP AVDD12_DEMOD T/C&AT&CHB R342 10K AJ26 AVSS33_DEMOD C341 0.047uF T/C&AT&CHB PB1P PR1P U35 Close to MT5369 TP300 HP_OUT L303 BLM18PG121SN1D IF_AGC Y1P RF_AGC SOY1 COM0 AP31 AN30 LOUTN PB0P LOUTP PR0P HP_LOUT Y0P V35 OSCL2 HP_OUT C332 0.22uF 10V V34 OSDA2 OSCL2 AR29 VDACX_OUT SC0 AK4 TXDCLKP AJ3 TXD2N AJ4 TXD2P AJ1 TXD1N AJ2 TXD1P AH3 TXD0N AH4 TXD0P TXA4N AU2 CI_ADDR[0-14] CH3 TXA4P AT1 CI_ADDR[0] TXA3N AU1 CH2 TXACLKP AP1 TU_CVBS R340 100 100 C360 C359 0.047uF 0.047uF AR30 AR31 AN29 C361 1uF AP30 CVBS3P AK24 AK25 CI_ADDR[12] CI_ADDR[11] CI_ADDR[13] TXB3N CI_ADDR[14] For PCB Pattern TXBCLKN AR5 AT4 AU4 TXBCLKP HP_OUT 1.2K R351 TXB2N 1.2K CH6 TXB2P AP4 R352 C377 1200pF HP_OUT HP_OUT TXB1N AR4 CH5 TXB1P AP3 1.2K HP_OUT R369 1.2K R370 C383 HP_OUT 1200pF HP_OUT TP328 C395 1200pF HP_OUT MT5369_TS_OUT[0] HP_LOUT_MAIN MT5369_TS_OUT[1] MT5369_TS_OUT[2] MT5369_TS_OUT[3] MT5369_TS_OUT[4] SCART_Rout_SOC MT5369_TS_OUT[5] CI_DATA[0-7] AN35 MT5369_TS_OUT[6] AN34 MT5369_TS_OUT[7] AUDIO_R_OUT_COMMERCIAL AM32 AM34 CI_DATA[2] CI_DATA[4] AM33 CI_DATA[5] R376 1.2K R378 AM35 1.2K R377 1.2K R379 C400 1200pF TP341 TP342 TP343 MT5369_TS_IN[1] MT5369_TS_IN[2] MT5369_TS_IN[3] ARC L300 SC_ID_SOC DSUB_R+ /CI_CD2 BLM15BD121SN1 Y32 R366 100 AP11 R367 100 AM12 R368 100 R371 AM10 AUD_SCK AN11 C333 47pF 50V R322 75 AUD_LRCK AUD_MASTER_CLK 100 AM11 /CI_CD1 D301 ADLC 5S 02 015 5.5V AUD_LRCH C389 22pF OPT C387 22pF OPT Don’t use as GPIO AN10 C393 22pF OPT C396 33pF OPT DSUB_G+ DSUB_HSYNC_SOC AM25 0.01uF 0.01uF C366 C367 100 R356 100 0.01uF C368 100 R358 AP24 0.01uF C369 100 R359 AT24 1500pF C370 DSUB_B+ RGB_DDC_SCL D302 ADLC 5S 02 015 5.5V AP26 AU26 AP25 0.01uF AU28 C371 0.01uF 100 R361 C372 100 R362 AR28 0.01uF C373 100 R363 AP27 0.01uF C374 100 R364 AR27 1500pF C375 AT28 TP356 TP308 TP309 TP310 TP311 TP359 TP360 TP361 TP362 TP363 /PCM_WAIT TP364 SC_R_IN_SOC TP365 SC_L_IN_SOC TP366 SC_CVBS_IN_SOC TP367 SC_COM_SOC SC_G_SOC AR26 TP355 TP307 /PCM_IRQA L304 BLM15BD121SN1 R320 75 TP354 PCM_RST /PCM_REG MT5369_TS_CLK C334 47pF 50V TP351 TP352 TP353 TP358 MT5369_TS_VAL CI_A_VS1 DSUB_VSYNC_SOC RGB_DDC_SDA AP22 D300 ADLC 5S 02 015 5.5V TP348 TP357 /PCM_OE R357 AU24 AR22 R321 75 TP347 TP350 /PCM_IORD /PCM_WE BLM15BD121SN1 C335 47pF 50V TP346 TP349 /PCM_IOWR /PCM_CE1 MT5369_TS_SYNC L301 AN9 AR24 MT5369_TS_IN[5] MT5369_TS_IN[6] MT5369_TS_IN[7] AR16 AR25 MT5369_TS_IN[4] PLACE AT JACK SIDE SPDIF_OUT C380 0.1uF AR11 TP336 TP344 MT5369_TS_IN[0] C399 1200pF DAC_3V3 C365 0.01uF TP335 TP345 AF30 AE30 TP333 TP334 TP340 CI_DATA[7] C398 1200pF C397 1200pF TP332 TP338 CI_DATA[6] 1.2K TP330 TP331 TP339 CI_DATA[3] AM37 TP329 TP337 CI_DATA[0] CI_DATA[1] AM36 TP325 TP327 HP_ROUT_MAIN C390 1200pF HP_OUT CH4 TXB0P TP324 TP326 MT5369_TS_OUT[0-7] TXB0N AR3 TP321 TP322 TP323 TP368 TP369 SC_COM_SOC SC_R_SOC TP370 SC_G_SOC SC_B_SOC TP371 SC_R_SOC SC_FB_SOC TP372 SC_B_SOC DTV/MNT_V_OUT_SOC TP373 SCART_Rout_SOC TP374 SC_FB_SOC For PCB Pattern COMP1_Pb_SOC SCART_Lout_SOC TP375 PCM_5V_CTL TP377 SC_DET TP378 COMP1_Pr_SOC AU30 0 AP29 0 OPT COMP1_Y_SOC R349 R350 DTV/MNT_V_OUT_SOC VDD3V3 AD21 AVDD33_VDAC CVBS2P AD19 CVBS1P AVDD12_RGB +1.2V_MTK_AVDD CVBS0P CVBS_COM VDD3V3 CI_ADDR[10] MT5369_MISTRT TXB3P AP5 AD20 AVDD33_VDAC_BG AT30 R341 MT5369_MCLKI MT5369_MIVAL_ERR TXB4P AR6 TP320 CI_ADDR[9] TXB4N AP6 TP319 CI_ADDR[8] TXA0P AU6 TP318 CI_ADDR[7] CH1 TXA0N AM4 TP317 CI_ADDR[6] TXA1P AM3 TP316 CI_ADDR[5] TXA1N AN2 TP315 CI_ADDR[4] TXA2P AN1 TP314 CI_ADDR[3] TXA2N AP2 TP313 CI_ADDR[2] TXACLKN AR2 TP312 CI_ADDR[1] TXA3P AR1 VDACY_OUT SY0 SC_CVBS_IN_SOC For PCB Pattern AV1_CVBS_IN_SOC HP_OUT C331 0.22uF 10V TXDCLKN SOY0 OSDA2 AP28 HP_ROUT TXD3P AK3 AT26 COM1 U34 HP_OUT L302 BLM18PG121SN1D TXD3N AL2 VGA_SCL AVSS12_DEMOD C355 0.047uF T/C&AT&CHB Close to Tuner SOG VGA_SDA AM28 T/C&AT&CHB R332 10K GP COM AL27 C351 0.1uF HP_ROUT_AMP TXD4P AL1 AN25 ADCINP_DEMOD AD22 C364 0.1uF +1.2V_MTK_AVDD 33pF T/C&AT&CHB HP_LOUT_AMP AL4 AOSDATA0 Close to MT5369 10V T/C&AT&CHB C310 IF_AGC AOBCK AOLRCK T/C&AT&CHB T/C&AT&CHB C337 ASPDIF1 AN28 MPXP R334 C309 OPT 0.01uF R339 2.2K OPT 33pF TXD4N Y33 ALIN VMID_AADC C336 1uF 10V TXC0P AVSS33_DAC1 AVDD33_AADC AJ27 AL14 T/C&AT&CHB R346 0 TXC0N AD2 AG30 AIN6_R_AADC AVSS33_AADC AL15 IF_P TXC1P AD1 AL3_ADAC AIN5_L_AADC AL31 C305 1uF 25V TUNER_SIF T/C&AT&CHB C312 TXC1N AE2 AUDIO_L_OUT_COMMERCIAL AIN1_R_AADC AVSS33_DAC AVSS12_REC TXC2P AE1 AK30 AL16 AVSS33_LD AVSS33_COM AIN0_R_AADC VDD3V3 C328 0.1uF TXC2N AE4 SCART_Lout_SOC D34 AR13 TXCCLKP AE3 BE0P For PCB Pattern AVDD33_USB_P2P3 C302 0.1uF TXCCLKN AF4 AT6 BE4N D36 AU13 TXC3P AF3 BO0P R343 24K 1% USB_DM_P0 TXC3N AG2 AT2 AVDD12_LVDS_2 AJ5 D2+_HDMI4_JACK TXC4P AG1 AE0P AG6 CK+_HDMI1_SOC TXC4N AG4 AL3 TCON4 D2-_HDMI1_SOC AC37 C36 C37 TCON0 TCON1 D2+_HDMI1_SOC AA36 AVSS33_HDMI_RX_4 USB_DP3 AO1N F27 MODEL_OPT_8 D0+_HDMI3_JACK AE36 AK35 AVDD33_HDMI_0_RX AB30 AD30 AG37 AB35 HDMI_1_HPD AO3P D0-_HDMI2_JACK D1+_HDMI2_JACK HDMI_1_RX_CB HDMI_0_HPD AO3N D0+_HDMI2_JACK AG34 AE37 HDMI_2_SDA AG32 HDMI_HPD_2_JACK HDMI_HPD_3_JACK +1.2V_MTK_AVDD HDMI_0_SCL AF33 DDC_SDA_2_JACK DDC_SDA_3_JACK 5V_HDMI_2_JACK HDMI_0_RX_0 HDMI_0_RX_0B AG33 DDC_SCL_2_JACK DDC_SCL_3_JACK AG3 AG35 HDMI_CEC AJ22 AVSS33_VDAC_BG AVDD33_CVBS_1 AVSS12_RGB AVDD33_CVBS_2 AVSS33_VDAC AJ21 C382 0.1uF AL24 AL25 AM26 AVSS33_CVBS_1 AVSS33_CVBS_2 Place at JACK SIDE THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes MID_MAIN_2 2011.12.19 9 LGE Internal Use Only +3.3V_NORMAL +1.2V_MTK_CORE VDD3V3 C503 10uF C500 10uF 5600mA 60mA L500 BLM18PG121SN1D C510 0.1uF C506 10uF C524 10uF C504 2.2uF C529 0.1uF C505 10uF C532 0.1uF IC105 LGE2112 C535 0.1uF IC105 LGE2112 +1.2V_MTK_CORE +1.2V_MTK_CORE AR7 AT7 AU7 AP8 AR8 +1.2V_MTK_CORE AT8 AU8 AM7 C539 10uF C543 0.1uF C546 0.1uF C548 0.1uF C550 0.1uF C552 0.1uF AN7 C553 0.1uF AP7 AM8 AN8 P14 R14 T14 VDD3V3 U14 AVDD_33SB V14 L501 BLM18PG121SN1D W14 Y14 AA14 C501 0.1uF +1.2V_MTK_CORE +1.2V_MTK_AVDD AB14 AC14 L502 BLM18PG121SN1D AC19 P15 C525 10uF C502 0.1uF AC15 P16 AC16 V23 W23 Y23 AA23 AC22 VCCK_43 VCCK_31 VCCK_45 VCCK_32 VCCK_47 VCCK_36 VCCK_42 VCCK_8 VCCK_44 VCCK_10 VCCK_46 VCCK_12 VCCK_48 VCCK_33 VCCK_37 VCCK_30 VCCK_39 VCCK_7 VCCK_41 VCCK_29 VCCK_38 VCCK_6 VCCK_40 VCCK_27 VCCK_1 VCCK_5 VCCK_9 VCCK_26 VCCK_11 VCCK_4 VCCK_13 VCCK_34 VCCK_14 VCCK_35 R2 AC23 R3 AD24 J4 P23 R4 R24 Y4 T24 F5 AC24 J5 AC21 R5 P20 Y5 AC20 W5 P19 L7 AC18 M7 P18 R7 AC17 AA5 P17 AB5 AD18 K7 AD23 U7 VCCK_16 W7 VDD3V3 E9 VCCK_18 VCCK_20 E8 AL9 VCCK_22 VCC3IO_B_4 VCCK_23 VCC3IO_B_2 VCCK_28 VCC3IO_B_1 VCCK_2 VCC3IO_B_3 VCCK_24 VCC3IO_A_5 VCCK_3 VCC3IO_A_7 VCCK_25 VCC3IO_A_6 VCCK_15 VCC3IO_A_8 VCCK_17 VCC3IO_A_3 VCCK_19 VCC3IO_A_4 VCCK_21 VCC3IO_A_2 F9 AK10 G14 AK9 J6 AK11 R15 H29 T15 J29 U15 H30 V15 J30 W15 G31 Y15 G32 AA15 F33 AB15 E34 H11 VCC3IO_A_1 R16 T16 U16 V16 DAC_3V3 +5V_NORMAL W16 IC501 AP1117E33G-13 Y16 AA16 AB16 INADJ/GND R17 OUT POWER_ON/OFF1 T17 C526 10uF 10V TP500 U17 V17 Y17 T18 V18 Y18 R500 1 T19 V19 Y19 C540 10uF 10V C544 0.1uF 16V W17 AA17 AB17 R18 AB6 H19 H22 J11 J12 J22 R6 DVSS_51 DVSS_55 DVSS_52 DVSS_62 DVSS_37 DVSS_73 DVSS_53 DVSS_83 DVSS_107 DVSS_92 DVSS_20 DVSS_104 DVSS_38 DVSS_117 DVSS_54 DVSS_127 DVSS_108 DVSS_137 DVSS_95 DVSS_29 DVSS_44 DVSS_63 DVSS_46 DVSS_74 DVSS_56 DVSS_84 DVSS_120 DVSS_93 DVSS_130 DVSS_105 DVSS_43 DVSS_118 DVSS_77 DVSS_128 DVSS_97 DVSS_138 DVSS_13 DVSS_64 DVSS_12 DVSS_75 DVSS_22 DVSS_85 DVSS_28 DVSS_94 DVSS_39 DVSS_106 DVSS_57 DVSS_119 DVSS_68 DVSS_129 DVSS_78 DVSS_139 DVSS_87 DVSS_65 DVSS_99 DVSS_76 DVSS_112 DVSS_86 DVSS_122 DVSS_140 DVSS_132 DVSS_96 DVSS_34 DVSS_30 DVSS_58 DVSS_27 DVSS_69 DVSS_109 DVSS_79 DVSS_17 DVSS_88 DVSS_25 DVSS_100 DVSS_45 DVSS_113 DVSS_66 DVSS_123 DVSS_7 DVSS_133 DVSS_14 DVSS_59 DVSS_8 DVSS_70 DVSS_18 DVSS_80 DVSS_26 DVSS_89 DVSS_33 DVSS_114 DVSS_136 DVSS_71 DVSS_126 DVSS_90 DVSS_49 DVSS_115 DVSS_103 DVSS_72 DVSS_82 DVSS_91 DVSS_61 DVSS_116 DVSS_110 DVSS_101 DVSS_135 DVSS_124 DVSS_125 DVSS_134 DVSS_102 DVSS_60 DVSS_131 DVSS_81 DVSS_121 DVSS_35 DVSS_47 DVSS_36 DVSS_67 DVSS_40 DVSS_98 DVSS_41 DVSS_111 DVSS_42 DVSS_11 R20 T20 U20 V20 W20 Y20 AA20 AB20 G16 R21 T21 U21 V21 W21 Y21 AA21 AB21 R22 T22 U22 V22 W22 Y22 AA22 AB22 R23 T23 U23 AB23 W6 G17 F25 Y6 E21 F21 L8 T7 D11 E11 D12 E22 F22 G25 AB19 AA19 P22 W19 U19 R19 Y7 AB18 AA18 W18 U18 AA7 N22 T8 W8 Y8 E7 F8 DVSS_21 +3.3V_NORMAL 3.3V_EMMC +3.3V_NORMAL EMMC_VCCQ LAN_JACK_POWER L504 BLM18PG121SN1D L506 BLM18PG121SN1D C512 0.1uF 16V TP501 C522 0.1uF 16V DECAP FOR SOC (HIDDEN - UCC) DECAP FOR SOC (BOTTOM) SMD Gaskit +1.2V_MTK_CORE THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes SMD_GASKIT_8.5T_COMP M502 C514 0.1uF C520 0.1uF C527 0.1uF C531 0.1uF C537 0.1uF C545 0.1uF MDS62110209 +1.5V_DDR +1.5V_DDR USB3 MDS62110217 MDS62110217 USB1~2 SMD_GASKIT_12.5T_HDMI1 M506 MDS62110209 COMP SMD_GASKIT_12.5T_USB3 M505 SMD_GASKIT_8.5T_RGB M501 M504 M500 RGB HDMI2~3 MDS62110217 M503 HDMI1~2 SMD_GASKIT_12.5T_USB1 MDS62110209 LAN MDS62110217 SMD_GASKIT_12.5T_HDMI2 SMD_GASKIT_8.5T_LAN +1.2V_MTK_CORE C508 0.1uF C523 0.1uF C533 0.1uF MID_MAIN_3 C536 0.1uF C547 0.1uF 2011.12.09 10 LGE Internal Use Only +1.5V_DDR IC703 H5TQ2G63BFR-PBC IC701 H5TQ2G63BFR-PBC A_RVREF2 A_RVREF4 M8 A0 VREFCA A1 A_RVREF1 A_RVREF1 C713 0.1uF R706 1K 1% A3 VREFDQ R710 R707 1K 1% A2 H1 1% 240 A4 A5 L8 A6 ZQ C714 0.1uF +1.5V_DDR A7 A8 B2 D9 G7 +1.5V_DDR K2 K8 A_RVREF4 C715 0.1uF R708 1K 1% N1 N9 R1 R9 VDD_1 A9 VDD_2 A10/AP VDD_3 A11 VDD_4 A12/BC VDD_6 D2 E9 F1 H2 IC701-*2 K4B2G1646C-HCK0 IC701-*1 NT5CB128M16BP-DI BA0 P7 P3 N2 P8 P2 R8 R2 T8 R3 L7 R7 N7 T3 H9 A5 L8 K3 VDD_1 VDD_2 A11 VDD_3 A12/BC VDD_4 VDD_5 VDD_6 VDD_7 VDD_8 D9 G7 K2 K2 K8 K8 N1 N1 N9 N9 R1 R1 R9 R9 VDD_9 BA0 A8 B2 D9 G7 VDD_1 A9 VDD_2 A10/AP VDD_3 VDDQ_1 VDDQ_3 CK VDDQ_4 CKE VDDQ_5 CS VDDQ_7 ODT VDDQ_8 RAS NC_6 VDD_7 VDDQ_1 VDDQ_2 CK CK VDDQ_3 CKE VDDQ_4 CS VDDQ_6 VDDQ_5 ODT VDDQ_7 RAS VDDQ_8 CAS VDDQ_9 NC_1 NC_2 RESET NC_3 NC_4 F3 A1 A1 A8 A8 C1 C1 C9 C9 D2 D2 E9 E9 F1 F1 H2 H2 H9 H9 J1 J1 J9 J9 L1 L1 L9 L9 T7 T7 A9 A9 NC_6 DQSL VSS_2 DQSU VSS_3 DML VSS_4 DMU VSS_5 VSS_6 E3 F2 F8 H3 H8 G2 H7 VSS_7 DQL0 DQL1 VSS_8 DQL2 VSS_9 DQL3 VSS_10 DQL4 VSS_11 CAS C2 A7 A2 B8 A3 T7 ARA[14] VDDQ_2 CK CK VDDQ_4 VDDQ_6 CS ODT VDDQ_8 RAS VDDQ_9 CAS A9 M2 B3 M3 E1 J7 G8 K7 K9 J2 L2 J8 K1 M1 J3 K3 L3 M9 T2 P1 WE NC_1 NC_2 B3 E1 E1 G8 G8 J2 J2 J8 J8 RESET P9 NC_3 NC_4 F3 DQSL M1 M1 M9 M9 P1 P1 P9 P9 T1 T1 T9 T9 VSS_1 DQSU VSS_2 DQSU G3 T1 C7 T9 B7 VSS_3 DML DMU VSS_8 DQL1 DQL2 VSS_10 DQL3 VSS_11 DQL4 VSS_12 VSSQ_1 VSSQ_2 DQU0 DQU1 VSSQ_3 VSSQ_4 DQU3 VSSQ_5 DQU4 VSSQ_6 DQU5 VSSQ_7 DQU6 VSSQ_8 B1 B1 B9 B9 D1 D1 D8 D8 E2 E2 E8 E8 F9 F9 G1 G1 G9 G9 VSSQ_9 DQU7 DDR_SS NC_4 B9 F2 F8 D1 H3 H8 DQL5 D8 G2 H7 E2 DQL7 VSSQ_1 D7 VSSQ_2 DQU0 VSSQ_3 DQU1 VSSQ_4 DQU2 VSSQ_5 DQU3 VSSQ_6 DQU4 VSSQ_7 DQU5 VSSQ_8 DQU6 VSSQ_9 DQU7 VDD_1 VDD_2 ARA[11] ARA[11] R7 A10/AP R7 VDD_3 A12/BC VDD_4 ARA[13] ARA[12] N7 ARA[13] T3 A11 ARA[12] A13 VDD_5 A15 M3 K3 /ARCAS /ARCAS L3 J3 /ARRAS /ARRAS K3 K1 ARODT ARODT L3 /ARWE /ARWE CK VDDQ_2 CK VDDQ_3 CKE VDDQ_4 R719 1K 1% R9 DQSU VSS_2 DQSU CS VDDQ_6 VSS_3 E7 ODT VDDQ_7 D2 RAS VDDQ_8 CAS VDDQ_9 IC105 LGE2112 E9 F1 H2 +1.5V_DDR H9 IC703-*1 NT5CB128M16BP-DI DML VSS_4 E8 C3 C8 F9 C2 A7 G1 A2 B8 G9 A3 ARDQM0 D3 NC_2 NC_4 DQSL ARDQM1 DMU VSS_5 ARDQ[16-23] ARDQ[0-7] VSS_6 E3 DQL0 VSS_7 DQL1 VSS_8 DQL2 VSS_9 VSS_10 DQL3 VSS_11 DQL4 VSS_12 DQL5 F7 F8 H3 H8 G2 VSSQ_3 DQU1 VSSQ_4 DQU2 VSSQ_5 DQU3 VSSQ_6 DQU4 VSSQ_7 DQU5 VSSQ_8 DQU6 VSSQ_9 DQU7 F7 F2 F8 ARDQ[20] H3 ARDQ[21] H8 ARDQ[22] G2 ARDQ[23] H7 H7 ARDQ[24-31] D7 DQU0 E3 ARDQ[19] ARDQ[8-15] VSSQ_2 ARDQ[16] ARDQ[17] ARDQ[18] F2 DQL7 VSSQ_1 D3 C3 C8 C2 A7 A2 B8 ARDQ[24] P7 L1 N2 L9 P2 T7 P3 P8 R8 ARA[14] R2 T8 R3 L7 DQSU VSS_1 DQSU VSS_2 VSS_3 DML VSS_4 DMU VSS_5 DQL0 VSS_7 DQL1 VSS_8 DQL2 VSS_9 DQL3 VSS_10 DQL4 VSS_11 DQL5 VSS_12 C3 ARDQ[26] C8 ARDQ[27] C2 ARDQ[28] A7 ARDQ[29] A2 ARDQ[30] B8 ARDQ[31] A3 A3 N7 A9 T3 B3 M7 E1 M2 N8 G8 M3 P7 A1 P3 A2 H1 J2 A4 P8 A5 P2 L8 J8 K9 M1 R2 T8 A8 B2 VDD_1 A9 A10/AP VDD_2 A11 VDD_3 A12 VDD_4 NC_6 VDD_5 NC_5 VDD_7 BA0 VDD_9 VDD_6 VDD_8 J3 K3 P1 L3 VDDQ_1 VDDQ_2 CK CK VDDQ_3 CKE VDDQ_4 CS VDDQ_6 VDDQ_5 ODT VDDQ_7 RAS VDDQ_8 CAS VDDQ_9 NC_1 NC_3 NC_4 F3 E7 B1 DQU1 VSSQ_3 DQU2 VSSQ_4 DQU3 VSSQ_5 DQU4 VSSQ_6 DQU5 VSSQ_7 DQU6 VSSQ_8 DQU7 K9 E9 K1 H2 J3 H9 K3 D3 B9 J9 D1 F2 F8 D8 H3 H8 E2 G2 H7 E8 VSS_3 VSS_5 VSS_6 DQL0 VSS_7 DQL1 VSS_8 DQL2 VSS_9 DQL3 VSS_10 DQL4 VSS_11 DQL5 VSS_12 G1 C2 G9 A2 C8 A7 VSSQ_9 B8 A3 DDR_NANYA VDD_1 VDD_2 A11 VDD_3 A12/BC VDD_4 VDD_5 VDD_6 NC_5 VDD_7 BA0 VDD_9 VDD_8 D9 B3 G7 K2 C3 K8 N1 AC3 N9 R1 AC4 R9 A1 VDDQ_1 VDDQ_2 CK CK VDDQ_3 CKE VDDQ_4 CS VDDQ_6 VDDQ_5 ODT VDDQ_7 RAS VDDQ_8 CAS VDDQ_9 NC_3 NC_4 TP700 C1 C9 D3 M1 F7 P1 F2 P9 F8 T1 H3 T9 H8 G2 H7 DQU1 VSSQ_3 DQU2 VSSQ_4 DQU3 VSSQ_5 DQU4 VSSQ_6 DQU5 VSSQ_7 DQU6 VSSQ_8 DQU7 VSSQ_9 VSS_2 VSS_3 DML VSS_4 DMU VSS_5 DQL0 VSS_7 VSS_6 E3 M9 DQL1 VSS_8 DQL2 VSS_9 DQL3 VSS_10 DQL4 VSS_11 RVREF_A RVREF_B D2 B9 DQL5 VSS_12 F1 C3 D8 C8 E2 C2 E8 A7 F9 A2 G1 B8 G9 A3 VSSQ_2 DQU0 DQU1 VSSQ_3 DQU2 VSSQ_4 DQU3 VSSQ_5 DQU4 VSSQ_6 VSSQ_7 DQU5 VSSQ_8 DQU6 H9 G21 ARDQ0 DDRV_5 ARDQ1 DDRV_8 ARDQ2 DDRV_10 ARDQ3 DDRV_4 ARDQ4 DDRV_7 ARDQ5 DDRV_46 ARDQ6 DDRV_47 ARDQ7 ARDQM1 MEMTN ARDQS1 ARDQS1 RVREF_B ARDQ8 RVREF_A ARDQ9 J9 ARDQ10 L9 T7 ARDQ11 F10 ARCKE ARDQ12 ARCKE B3 E1 J2 C9 /ARCLK1 J8 ARDQ13 D9 ARCLK1 G8 P1 ARCLK1 ARDQ14 ARCLK1 ARDQ15 ARCLK0 ARDQM2 ARCLK0 ARDQS2 A20 ARCLK0 P9 T1 A21 /ARCLK0 T9 D1 F17 /ARRAS D8 E2 E17 /ARCAS E8 RVREF_A F9 G1 R730 1K 1% G9 E16 /ARCS C746 0.1uF D14 /ARWE R731 1K 1% C747 0.1uF ARODT ARDQ16 ARRAS ARDQ17 ARCAS ARDQ18 ARCS ARDQ19 ARWE ARDQ20 ARDQ21 B14 ARREST DDR_SS ARRESET ARDQ22 ARBA0 G11 D16 ARBA0 ARDQM3 ARBA2 ARDQS3 ARDQS3 ARCSX +1.5V_DDR ARA[14]C15 ARA[13]A15 RVREF_B R732 1K 1% R733 1K 1% +1.5V_DDR C726 0.1uF C728 0.1uF C705 1uF C17 D24 C16 C24 D15 ARDQM1 B20 ARDQS1 C20 ARDQ[8-15] /ARDQS1 A17 A23 D17 B23 D20 D22 D19 C22 C748 0.1uF C749 0.1uF C707 10uF 10V ARDQM2 B9 ARDQS2 A9 /ARDQS2 C12 ARDQ[16-23] D6 B12 C5 C13 A5 A12 B5 E10 ARBA1 F18 C724 0.1uF D23 ARDQ23 A13 ARBA2 C722 0.1uF ARDQ[0-7] /ARDQS0 B17 A7 ARDQS2 E18 ARODT +1.5V_DDR B9 ARBA1 C720 0.1uF ARDQS0 C23 M1 M9 DDR_HYNIX C718 0.1uF ARDQM0 C21 B21 D21 MEMTP L1 VSSQ_9 DQU7 DDR_NANYA DDR_HYNIX DDRV_2 G13 H2 B1 VSSQ_1 D7 D1 G9 TP701 DQL6 DQL7 B1 VSSQ_1 VSSQ_2 DQU0 VSS_1 DQSU J2 ARDQS0 A9 DQSU E7 J8 ARDQS0 DDRV_1 E9 NC_6 DQSL C7 B7 E1 G8 ARDQM0 DDRV_45 G10 A8 J1 NC_1 NC_2 F3 B3 C19 DDRV_44 BA1 L9 DQL6 DQL7 C3 D4 DQSL VSS_4 D7 F9 A9 A10/AP RESET T7 C4 B2 T2 G3 VSS_1 VSS_2 DML E3 F7 L8 ZQ WE L1 B4 A7 A8 L2 F1 A9 DQSU DQSU DMU VSSQ_1 VSSQ_2 K7 C9 D2 NC_7 DQSL A5 A6 J7 DQSL C7 B7 DQL7 VREFDQ A3 A4 BA2 A8 A4 H1 A13 L3 NC_2 A1 A2 M2 C1 A3 VREFCA A0 M7 R1 R9 J1 T1 DQL6 DQU0 N7 T3 N1 N9 N8 RESET G3 L7 R7 K2 K8 M3 T2 T9 D9 G7 A1 WE P9 R3 BA1 L2 K1 M9 R8 ZQ A6 A7 J7 K7 N2 VREFDQ A3 M8 N3 VREFCA A0 BA2 VSS_6 D7 ARDQ[25] AC1 AC2 M8 N3 J9 NC_6 E7 ARDQM3 IC703-*2 K4B2G1646C-HCK0 J1 NC_1 R7 ARDQM2 C734 0.1uF C9 DQSL B7 /ARDQS3 /ARDQS1 C704 10uF 10V A8 C7 ARDQS3 ARDQS1 B7 C702 1uF C1 VDDQ_5 F3 /ARDQS2 /ARDQS0 C7 VSS_1 C757 0.1uF A1 RESET G3 C755 0.1uF R1 WE ARDQS2 ARDQS0 G3 C753 0.1uF N9 VDDQ_1 T2 ARREST ARREST N1 BA1 L2 /ARCS /ARCS J3 K9 C745 0.1uF C733 0.1uF R718 1K 1% VDD_9 J7 K7 ARCKE /ARCLK1 /ARCLK0 C751 0.1uF +1.5V_DDR +1.5V_DDR A_RVREF3 K8 BA2 R714 100 5% R712 100 5% ARCKE C701 10uF 10V K2 VDD_8 BA0 ARCLK0 K7 K1 M3 ARBA2 ARBA2 K9 N8 C736 0.1uF G7 VDD_7 M2 ARBA1 ARCLK1 ARBA1 R721 1K 1% D9 VDD_6 M7 N8 C703 1uF B2 T3 ARBA0 C758 0.1uF +1.5V_DDR N7 F3 DQSL B1 F7 DQL6 DQU2 A9 1% 240 R716 ZQ A7 NC_3 DQL6 E3 DQL0 VSS_9 ARA[9] L8 A6 NC_3 D3 VSS_6 VSS_7 R3 ARA[9] R3 ARA[10] L7 A8 T2 E7 VSS_4 VSS_5 ARA[8] DQSL M7 CKE VDDQ_5 VDDQ_7 ARA[6] R8 ARA[7] R2 ARA[8] RESET NC_2 NC_6 N8 VDDQ_3 NC_7 B3 VSS_12 DQL5 DQL7 C3 R3 L7 A5 A_RVREF3 ARA[6] ARBA0 C756 0.1uF VREFDQ A4 ARA[7] ARA[10] C754 0.1uF C735 0.1uF R720 1K 1% H1 A3 T8 WE NC_1 R7 BA2 DQL6 D7 C8 R2 T8 DQSL VSS_1 DQSU E7 F7 L9 A2 R2 L7 A_RVREF2 T3 BA0 VDDQ_1 DQSL C7 D3 L1 P2 R8 NC_5 VDD_8 VDD_9 J9 N2 P8 VREFCA A1 ARA[3] N2 ARA[4] P8 ARA[5] P2 T8 C752 0.1uF M8 A0 R8 L2 VDDQ_6 J1 P7 P3 ARA[5] J7 CK VDDQ_2 N7 A12 VDD_5 VDD_6 BA1 T2 B7 A11 VDD_4 BA1 WE G3 A6 A7 B2 A9 A10/AP L2 L3 ZQ A7 A8 BA2 K1 A3 A5 L8 ZQ A6 J7 J3 A0 A2 VREFDQ A4 NC_5 K7 N3 VREFCA A1 A13 K9 H1 VREFDQ A3 A4 M2 N8 M8 H1 A1 A2 M7 M3 M8 VREFCA A0 ARA[4] P2 BA2 VDDQ_9 N3 ARA[3] P8 M2 A1 C9 ARA[2] N2 M7 VDD_8 BA1 C1 P3 ARA[0] N3 ARA[1] P7 ARA[2] P3 A15 VDD_7 C716 0.1uF A8 ARA[0] ARA[1] A13 VDD_5 VDD_9 R709 1K 1% N3 P7 C750 0.1uF ARA[0-13] ARA[0-13] +1.5V_DDR +1.5V_DDR ARDQ24 ARDQ25 ARA14 ARDQ26 ARA[12]F13 ARA[11]C14 ARA13 ARDQ27 ARA12 ARDQ28 ARA[10]F11 ARA[9] E15 ARA11 ARDQ29 ARA10 ARDQ30 ARA[8] D13 ARA[7] B15 ARA9 ARDQ31 ARA[6] E14 ARA[5] F16 ARA7 ARA6 AVDD33_MEMPLL ARA[4] E13 ARA[3] B13 ARA5 AVSS33_MEMPLL ARA[2] A14 ARA[1] F14 ARA3 ARA2 DVSS_50 ARA[0] F15 ARA1 DVSS_48 ARDQM3 C8 ARDQS3 D8 ARDQ[24-31] /ARDQS3 C6 D10 D7 C11 C7 C10 B7 B10 AVDD3V3_MEMPLL ARA8 N14 +3.3V_NORMAL AVDD3V3_MEMPLL N15 L700 BLM18PG121SN1D ARA4 R1 C700 0.1uF P21 ARA0 ARA[0-14] +1.5V_DDR C717 0.1uF C719 0.1uF C721 0.1uF C723 0.1uF C725 0.1uF C727 0.1uF C706 1uF C708 10uF 10V IC105 LGE2112 RVREF_C RVREF_D P13 V7 F3 /BRCLK0 V3 B_RVREF6 +1.5V_DDR A0 VREFCA R702 1K 1% A1 B_RVREF5 C709 0.1uF A2 H1 A3 VREFDQ A4 R703 1K 1% R711 C710 0.1uF 1% 240 A5 L8 A6 ZQ +1.5V_DDR A7 A8 B2 D9 +1.5V_DDR G7 K2 B_RVREF6 R704 1K 1% K8 C711 0.1uF N1 N9 R1 R705 1K 1% R9 A9 VDD_1 VDD_2 A10/AP VDD_3 A11 A12/BC VDD_4 VDD_6 C1 C9 D2 E9 F1 H2 H9 IC702-*1 NT5CB128M16BP-DI N3 M8 P7 P3 N2 P8 P2 R8 R2 T8 R3 L7 R7 N7 T3 VREFCA A0 VDD_1 VDD_2 A11 VDD_3 A12/BC VDD_4 VDD_5 VDD_6 VDD_7 VDD_8 BA0 CK VDDQ_2 CK VDDQ_3 VDDQ_4 VDDQ_5 CS VDDQ_6 ODT VDDQ_7 RAS VDDQ_8 CAS VDDQ_9 K2 K8 N1 N9 R1 R9 VDD_1 A9 VDD_2 A10/AP VDD_3 A12 NC_6 VDD_6 VDD_7 BA1 A8 C1 C9 D2 E9 F1 H2 A8 C1 C9 D2 E9 F1 H2 H9 H9 J1 NC_1 T2 NC_2 RESET NC_3 NC_4 F3 J9 L1 L9 J9 L1 L9 T7 VDDQ_1 VDDQ_2 VDDQ_3 CK CKE VDDQ_5 VDDQ_6 P8 R8 VDDQ_7 ODT VDDQ_8 RAS VDDQ_9 CAS NC_1 CK VDDQ_3 CK VDDQ_4 CKE VDDQ_5 CS VDDQ_7 ODT VDDQ_8 RAS VDDQ_9 CAS B7 VSS_2 DQSU VSS_3 E7 D3 DML VSS_4 DMU VSS_5 DQL0 VSS_7 VSS_6 E3 F7 F2 F8 H3 H8 G2 H7 DQL1 VSS_8 DQL2 VSS_9 DQL3 VSS_10 DQL4 VSS_11 DQL5 VSS_12 C2 A7 A2 B8 A3 M1 M9 P1 P9 T1 J2 J8 M1 M9 P1 P9 T1 T9 T9 VSS_2 M2 G8 N8 M3 J2 J8 K7 K9 M1 M9 K1 J3 P1 K3 L3 P9 T1 VSS_4 DML DMU DQL0 DQL1 VSS_9 DQL2 VSS_10 DQL3 VSS_11 DQL4 VSS_12 DQL5 DQL6 B1 VSSQ_1 DQU0 VSSQ_2 DQU1 VSSQ_3 DQU2 VSSQ_4 DQU3 VSSQ_5 DQU4 VSSQ_6 DQU5 VSSQ_7 DQU6 VSSQ_8 DQU7 VSSQ_9 B9 D1 D8 E2 E8 F9 G1 G9 DDR_SS THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes B9 D1 D8 E2 E8 F9 G1 G9 VSSQ_1 DQSU VSS_2 DQSU VSSQ_3 DQU1 VSSQ_4 DQU2 VSSQ_5 DQU3 VSSQ_6 DQU4 VSSQ_7 DQU5 VSSQ_8 DQU6 VSSQ_9 DQU7 R8 T8 BRA[8] A6 R3 BRA[9] BRA[7] R2 BRA[8] T8 L7 BRA[10] A8 R7 BRA[11] BRA[9] R3 BRA[10] L7 A9 VDD_1 N7 BRA[12] A10/AP VDD_2 T3 BRA[13] BRA[11] R7 BRA[12] N7 BRA[13] T3 A12/BC VDD_4 A13 VDD_5 N8 M3 DML K9 K1 J3 K3 L3 G3 D3 B9 D1 F7 F2 D8 F8 H3 E2 H8 G2 E8 H7 F9 C3 G1 C8 C2 A7 G9 B7 D3 DMU VSS_5 BRBA1 BRBA0 BRBA2 BRBA1 BRCLK0 BRBA2 BRCLK1 R713 100 5% BRCKE /BRCS /BRCLK1 /BRCS BRODT BRODT /BRRAS DQL0 DQL1 VSS_8 DQL2 VSS_9 DQL3 VSS_10 VSS_11 DQL4 VSS_12 DQL5 /BRCAS /BRRAS /BRWE /BRCAS BRREST BRDQS0 BRDQS2 /BRDQS0 BRDQS3 /BRDQS1 BRDQM0 BRDQM2 BRDQM1 BRDQM3 BRDQ[16-23] F7 BRDQ[16] BRDQ[17] F2 BRDQ[18] F8 BRDQ[19] H3 BRDQ[20] H8 BRDQ[21] G2 BRDQ[22] H7 BRDQ[23] D7 DQU0 VSSQ_3 DQU1 VSSQ_4 DQU2 VSSQ_5 DQU3 VSSQ_6 DQU4 VSSQ_7 DQU5 VSSQ_8 DQU6 DQU7 VSSQ_9 A2 B8 VDD_3 VDD_6 VDD_7 VDD_8 BA0 K1 K3 L3 R728 1K 1% D9 G7 B_RVREF8 K2 CK VDDQ_2 CK VDDQ_3 CKE VDDQ_4 VDDQ_5 CS VDDQ_6 ODT VDDQ_7 RAS VDDQ_8 CAS VDDQ_9 K8 NC_1 RESET NC_2 NC_4 F3 DQSL N9 R723 1K 1% R1 R9 D2 E9 VSS_3 DML VSS_4 DMU VSS_5 VSS_6 E3 F2 F8 H3 H8 G2 H7 DQL0 VSS_7 DQL1 VSS_8 DQL2 VSS_9 DQL3 VSS_10 DQL4 VSS_11 DQL5 VSS_12 F1 BRDQ[24-31] C3 BRDQ[24] C8 BRDQ[25] N3 L1 P3 L9 P8 T7 R8 C2 BRDQ[26] A7 BRDQ[27] A2 BRDQ[28] B8 BRDQ[29] A3 BRDQ[30] B8 BRDQ[31] A3 C3 C8 C2 A7 A2 E1 G8 J2 J8 M1 M9 P1 P9 T1 P7 N2 P2 BRA[14] R2 R7 N7 T3 A0 DQU1 VSSQ_3 DQU2 VSSQ_4 DQU3 VSSQ_5 DQU4 VSSQ_6 DQU5 VSSQ_7 DQU6 VSSQ_8 DQU7 VSSQ_9 A3 M5 BRA[10] P4 BRA[9] M3 BRA[8] L6 BRA[7] L3 BRA[6] N4 BRA[5] K5 BRA[4] N6 BRA[3] N2 BRA[2] M1 BRA[1] N3 BRA[0] K6 T9 M3 P3 H1 VREFDQ A4 A6 P2 L8 ZQ T8 A8 VDD_1 A10/AP VDD_2 A11 VDD_3 A12 VDD_4 NC_6 VDD_5 VDD_6 VDD_7 VDD_8 BA0 J3 L3 N7 T3 N9 R9 VDDQ_2 VDDQ_4 VDDQ_5 CS VDDQ_6 ODT VDDQ_7 RAS VDDQ_8 CAS VDDQ_9 NC_2 NC_4 F3 DQSL E9 L2 K1 H2 J3 H9 K3 J9 T7 D1 D8 E2 E8 VSS_1 VSS_3 DMU F7 F2 F8 H3 H8 G2 H7 VSS_4 VSS_5 VSS_6 DQL0 VSS_7 DQL1 VSS_8 DQL2 VSS_9 DQL3 VSS_10 DQL4 VSS_11 DQL5 VSS_12 G1 G9 C8 C2 A7 A2 B8 VDD_4 A13 VDD_5 NC_5 VDD_7 BA0 VDD_9 VDD_6 VDD_8 D9 VDDQ_1 CK VDDQ_2 VDDQ_3 VDDQ_4 VDDQ_5 CS VDDQ_6 ODT VDDQ_7 RAS VDDQ_8 CAS VDDQ_9 NC_1 NC_2 NC_4 F3 B3 B7 E1 G8 E7 J2 D3 R9 V6 M9 F7 F2 P9 F8 T1 H3 T9 H8 H7 DQU0 VSSQ_2 DQU1 VSSQ_3 DQU2 VSSQ_4 DQU3 VSSQ_5 DQU4 VSSQ_6 DQU5 VSSQ_7 DQU6 VSSQ_8 DQU7 VSSQ_9 DQSU VSS_1 DQSU VSS_2 DML VSS_4 VSS_3 VSS_5 VSS_6 DQL0 VSS_7 DQL1 VSS_8 DQL2 VSS_9 DQL3 VSS_10 DQL4 VSS_11 DQL5 VSS_12 A8 C1 B9 D7 D1 C3 D8 C8 E2 C2 E8 A7 F9 A2 G1 B8 G9 A3 H10 C9 D2 H13 E9 F1 E20 H2 H9 F20 J1 G20 J9 L1 G15 L9 T7 G18 B3 C25 E1 G8 B25 J2 J8 A25 M1 M9 H7 P1 P9 H8 T1 T9 J8 BRDQM0 BRDQS0 /BRDQS0 BRDQ[0-7] J1 B2 J2 C2 K1 BRDQM1 A2 BRCAS BRDQS1 K2 BRCS BRDQS1 BRDQ8 BRBA0 BRDQ9 BRBA1 BRDQ10 BRBA2 BRDQ11 BRDQ12 BRDQ13 BRDQ14 BRA14 F2 J3 BRDQM1 BRDQS1 /BRDQS1 BRDQ[8-15] B1 H3 D3 G3 C1 G4 D2 BRDQ15 BRA13 Y1 BRA12 BRDQM2 BRA11 BRDQS2 BRA10 BRDQS2 BRA9 BRDQ16 BRA8 BRDQ17 BRA7 BRDQ18 BRA6 BRDQ19 BRA5 BRDQ20 BRA4 BRDQ21 BRA3 BRDQ22 BRA2 BRDQ23 BRA1 V2 V1 T4 BRDQS3 BRDQ24 DDRV_11 BRDQ25 DDRV_13 BRDQ26 DDRV_38 BRDQ27 DDRV_42 BRDQ28 DDRV_40 BRDQ29 DDRV_14 BRDQ30 DDRV_18 BRDQ31 DDRV_23 BRDQ[16-23] /BRDQS2 P2 AB3 P3 AB1 P1 AB2 W3 W4 AA3 BRDQM3 BRDQS3 /BRDQS3 BRDQ[24-31] U4 AA4 T3 Y3 U3 Y2 U2 M2 BRRESET DDRV_39 BRDQM2 BRDQS2 AB4 U1 BRDQM3 BRDQS3 DDRV_41 F1 +1.5V_DDR BRREST E23 DDRV_48 DDRV_16 DDRV_19 DDRV_22 DDRV_24 DDRV_29 DDRV_49 DDRV_21 DDRV_36 DDRV_28 DDRV_37 DDRV_17 DDRV_43 DVSS_15 DDRV_35 DVSS_23 DDRV_32 DVSS_1 DDRV_33 DVSS_3 DDRV_15 DVSS_5 DDRV_20 DVSS_9 DDRV_27 DVSS_16 DDRV_25 DVSS_24 DDRV_26 DVSS_31 DDRV_12 DVSS_32 DDRV_9 DVSS_19 DDRV_6 DVSS_2 DDRV_3 DVSS_4 DDRV_30 DVSS_6 DDRV_31 DVSS_10 F24 G24 F23 G23 E24 E12 F12 A18 B18 C18 D18 E19 F19 G19 G22 E25 A26 B26 C26 D26 DDRV_34 DQL6 DQL7 B1 J10 D25 E3 P1 P7 A9 DMU J8 M1 N7 N9 R1 NC_6 DQSL AC6 K8 N1 A1 CK G7 G7 K2 BA1 NC_3 G2 VSSQ_1 D7 C3 VDD_2 VDD_3 A12/BC RESET C7 DQL6 DQL7 F9 B2 VDD_1 A10/AP A11 T2 A9 AC5 F7 A8 A9 DQSL VSS_2 E3 ZQ A6 A7 L9 G3 DQSU DML L8 WE L1 T6 A4 A5 CKE F1 NC_7 DQSU E7 D3 K9 D2 J1 NC_1 RESET J7 K7 L3 WE T2 A8 C9 H1 VREFDQ BA2 C1 G6 A1 D1 BRRAS BRCSX U6 A2 A3 M2 M3 VDDQ_3 VREFCA A0 A1 M7 R1 A1 CK L2 K3 R7 K8 N1 N8 CK CKE K1 R3 L7 G7 K2 VDD_9 VDDQ_1 J7 K9 B2 D9 BA1 BA2 K7 R8 R2 A7 A9 N2 P8 A5 M2 G3 B9 BRODT G5 E6 M8 N3 P7 A2 A3 NC_5 N8 VREFCA A1 M7 A3 DDR_NANYA M8 NC_3 B1 VSSQ_2 BRA[11] F6 J9 B7 DQU0 N5 U5 IC704-*2 K4B2G1646C-HCK0 DQSL D7 BRA[12] V5 IC704-*1 NT5CB128M16BP-DI C7 VSSQ_1 M4 T5 H9 DQL6 DQL7 BRA[13] BRDQ6 E4 E3 BRDQ7 BRWE L5 E5 H2 B3 BRDQ5 D5 R3 E7 C744 0.1uF BRDQ4 L4 +1.5V_DDR T8 VSS_2 C743 0.1uF BRDQ3 BRCLK1 BRA0 C9 A9 VSS_1 DQSU F7 C738 0.1uF C1 NC_6 DQSU K4 /BRWE BRA[14] A8 DQSL C7 D3 R729 1K 1% N1 J1 T2 B7 C737 0.1uF R722 1K 1% A1 WE G3 RVREF_D BA1 VDDQ_1 P5 BRBA1 BRA[0-14] VDD_9 L2 J3 C740 0.1uF +1.5V_DDR L7 BRDQS1 BRDQ[8-15] VSSQ_2 A11 BA2 K9 C742 0.1uF BRDQ1 BRCLK1 N1 BRBA0 +1.5V_DDR B2 NC_3 DQL7 VSSQ_1 M3 K7 BRCKE /BRCLK0 E3 VSS_7 A7 K3 /BRCS +1.5V_DDR M2 N8 1% 240 R717 ZQ J7 R715 100 5% BRDQ[0-7] VSS_6 L8 A15 K7 E7 VSS_4 A5 H5 BRBA2 R725 1K 1% VREFDQ A4 H4 BRDQ0 BRDQ2 H6 /BRCAS H1 A3 M7 BRBA0 /BRDQS3 VSS_3 B1 D7 DQU0 P2 BRA[6] C7 VSS_1 B7 DQL7 VSSQ_2 P8 BRA[5] F3 DQL6 E3 VSS_7 VSS_8 N2 BRA[4] BRREST DQSL A2 BRA[3] NC_3 NC_4 B_RVREF7 BRA[6] RESET NC_2 G3 E7 VSS_5 BRA[4] /BRDQS2 E1 DQSU VSS_6 A1 BRA[5] DQSL B3 M7 T9 VSS_3 B1 DQL7 C3 G8 J2 J8 E1 G8 DQL6 D7 C8 B3 E1 P3 /BRWE A9 N7 F3 DQSU BRA[2] BRA[7] T2 C7 VSS_1 BRA[3] R727 1K 1% BRCLK0 BRCKE /BRRAS C741 0.1uF C739 0.1uF R724 1K 1% VREFCA R2 P2 WE NC_1 NC_6 T3 NC_3 A9 B3 A0 M8 R8 P8 L2 VDDQ_6 DQSL A9 VSS_1 DQSU BRA[2] J7 VDDQ_2 DQSL C7 R726 1K 1% B_RVREF7 BRA[0] N3 BRA[1] P7 L7 R7 T2 DQSL VDDQ_1 T8 RESET NC_4 BRA[0-13] R3 WE NC_2 BRA[14] T7 N2 BA2 R2 L2 CS L9 P2 J7 CK VDDQ_4 NC_7 T7 P3 N2 BA2 NC_6 DQSL BA0 L1 P7 NC_5 VDD_8 VDD_9 R9 A11 VDD_4 VDD_5 J1 WE G3 R1 D9 G7 A1 CKE K3 N1 N9 A1 VDDQ_1 L2 L3 K2 K8 VDD_9 BA2 K1 D9 G7 BA1 J7 J3 A8 B2 B2 A9 A10/AP A6 A7 A7 NC_5 K7 A5 ZQ L8 ZQ A8 A3 A4 L8 A5 A6 M2 K9 VREFDQ H1 VREFDQ A4 A13 N8 A2 H1 A3 A0 A1 A1 A2 M7 M3 VREFCA M8 N3 P3 M2 J1 J9 BRA[1] M7 BA0 BA1 A8 BRA[0] P7 A15 VDD_7 VDD_8 VDD_9 C712 0.1uF N3 A13 VDD_5 A1 IC702-*2 K4B2G1646C-HCK0 B_RVREF8 BRA[0-13] M8 B_RVREF5 RVREF_C +1.5V_DDR BRDQS0 P6 BRCKE BRODT IC704 H5TQ2G63BFR-PBC BRDQS0 V4 BRCLK1 IC702 H5TQ2G63BFR-PBC BRDQM0 RVREF_D BRCLK0 /BRCLK1 +1.5V_DDR G2 RVREF_C F4 BRCLK0 B1 VSSQ_1 DQU0 VSSQ_2 DQU1 VSSQ_3 DQU2 VSSQ_4 DQU3 VSSQ_5 DQU4 VSSQ_6 DQU5 VSSQ_7 DQU6 VSSQ_8 DQU7 VSSQ_9 B9 D1 D8 E2 E8 F9 G1 G9 DDR_HYNIX DDR_HYNIX DDR_NANYA DDR_SS 2011.12.09 DDR ONE SIDE 12 LGE Internal Use Only FROM LIPS & POWER B/D PANEL_POWER L2408 BLM18SG121TN1D Q2401 R2408 3 GND 3.5V 9 10 3.5V 3.5V 11 12 3.5V GND 13 14 GND R2423 0 L/DIM0_VS POWER_16_VSYNC GND 15 16 GND/V-sync 12V 17 18 INV ON R2425 100 12V 19 20 A.DIM A_DIM 21 22 P.DIM1 GND/P.DIM2 23 24 Err OUT C2401 0.1uF 50V 25 SMAW200-H24S2 P2401 #16/#20/#23 LD - GND OR USE LE(N.L.D.) - OPEN LE(L.D.) - USE D S R2442 10K MTK_EPI Q2406 MMBT3904(NXP) PWM_DIM1 E +3.3V_NORMAL R2424 4.7K OPT ERROR_OUT 22 POWER_24_ERROR_OUT +5V_Normal R2417 100K OPT R2413 0 5% 3 +5V_NORMAL L2407 BLM18PG121SN1D R2419 100 RESET 2 +12V R2421 10K OPT IC2402 DEV_DCDC_TPS54327 POWER_DET 1 C2415 10uF 16V GND IC2404 TPS54327DDAR [EP]GND C2412 0.1uF 16V POWER_ON/OFF2_3 OPT R2416 100K +24V R1 VCC 3 2 2 VREG5 SS OPT R2 24V-->3.48V 12V-->3.58V ST_3.5V-->3.5V GND 6 VIN VBST C2429 0.1uF 16V SW +3.3V_NORMAL L2409 3.6uH L2413 BLM18PG121SN1D CN NR8040T3R6N R2418 100 RESET 7 3 C2416 100pF 50V 1 C2410 0.1uF 50V OPT VFB 56K NCP803SN293 R2411 1.5K 1% OPT 8 1 R2415 not to RESET at 8kV ESD OPT IC2401 R2412 8.2K 5% OPT EN C24001 0.1uF 16V 1% 9 R2435 10K THERMAL C2411 0.1uF 16V R2409 1.2K 1% +3.5V_ST NCP803SN293 VCC On-semi C B C2443 0.1uF 50V R2405 +3.5V_ST R2410 2.7K 1% R2437 10K PANEL_CTL Power_DET +12V R2442-*1 33K +3.3V_NORMAL R2426 1K INV_CTL C2440 1uF 25V OPT 1/8W 2K 8 1/8W 2K PANEL_DISCHARGE_REG R2452 7 G C2435 4.7uF 50V PANEL_DISCHARGE_REG R2451 GND C2413 0.1uF 50V R2441 1.8K GND MTK_EPI 6 0 PWM_DIM2 5 12V +12V L2401 CIS21J121 GND L2403 CIS21J121 POWER_24_GND C2406 0.1uF 16V 24V 24V R2422 L2402 CIS21J121 2 4 R2441-*1 5.6K PWR ON 1 24V 3 C2432 0.01uF 50V PANEL_VCC Q2407 AO3407A C2433 0.1uF 50V +24V MTK_NON_EPI OPT P2400 FW20020-24S 2 R2420 0 1 10K R2401 10K POWER_16_GND RL_ON +3.5V_ST TYP 1450mA +12V MMBT3906(NXP) MTK_NON_EPI +3.5V_ST R2439 10K 1% 4 3A 5 GND C2430 22uF 10V +3.3V_TU_IN +3.5V_ST POWER_ON/OFF1 POWER_ON/OFF2_1 POWER_ON/OFF2_2 POWER_ON/OFF2_3 POWER_ON/OFF2_4 L2412 C2428 3300pF 50V C2417 1uF 10V C2436 0.1uF 16V BLM18PG121SN1D NON_CN DDR MAIN 1.5V +1.2V_MTK_CORE C2418 10uF 10V C2419 0.1uF 16V 2 GND_1 3 GND_2 BOOT 13 EN R2404 PWRGD 14 PH_3 11 PH_2 10 IC2403 TPS54319TRE 9 PH_1 4 THERMAL 17 3A AGND C2422 SS/TR C2424 10uF 10V C2425 10uF 10V C2446 10uF 10V 0.01uF 50V C2427 0.1uF 16V C2447 10uF 10V R2432 1/16W 330K 5% R2431 15K Vout=0.8*(1+R1/R2) 1/16W VBST 14 13 5% R1 C2421 4700pF C2426 100pF 50V SW2 C2434 0.1uF 50V 1 12 NR8040T3R6N R2434 C2448 10uF 10V 12 1 C2431 10uF 16V L2406 3.6uH 47K 1% R2 VIN1 8 POWER_ON/OFF1 VIN_1 VIN_2 VIN2 16V RT/CLK R2403 10K L2405 BLM18PG121SN1D R1 5 C2404 0.1uF 16V C2405 4700pF 50V 7 R2402 3.3K IC2405 TPS54425PWPR [EP]PGND 3.4 A +3.3V_NORMAL C2423 0.1uF +1.5V_DDR COMP COMP 5.6K 1% EN C2441 3300pF 50V OPT VIN_3 5 C2414 10uF 10V 15 6 4 C2409 10uF 10V 6 3 C2408 10uF 10V VSENSE FB C2407 10uF 10V 1% C2403 0.1uF 16V OPT NC_1 OPT R24000 R2406 10K C2402 10uF 16V 7 L2410 BLM18PG121SN1D 0.1uF 16V +3.5V_ST NC_2 MAX +3.3V_NORMAL THERMAL AGND C2400 10uF 16V 2 9 VIN 8 THERMAL Placed on SMD-TOP 1 +12V C2420 [EP]LX *NOTE 17 PGND EP[GND] IC2400 AOZ1038PI 16 L2400 BLM18PG121SN1D L2404 2uH 15 10K R2430 POWER_ON/OFF2_1 +12V 2 VO R2 R2428 10K VFB 1% 3 4A 11 4 10 5 VREG5 SS C2438 1uF 10V R1 SW1 PGND2 PGND1 9 6 8 7 GND PG EN 50V R2407 100K R2427 33K 1% C2439 3300pF 50V R2414 10K C2437 0.1uF POWER_ON/OFF2_2 C2445 22pF 50V +3.3V_NORMAL L2411 2uH 3A $ 0.145 R2433 56K 1/16W 1% R2 C2442 22uF 10V C2444 22uF 10V Vout=0.827*(1+R1/R2)=1.521V Vout=(0.763+0.0017*Vout.set)*(1+R1/R2) THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes MID_POWER 2011.11.25 24 LGE Internal Use Only Renesas MICOM +3.3V_NORMAL R3035 4.7K OPT For Debug 12V_EXT_PWR_DET 10K HDMI_WAUP:HDMI_INIT R3000 +3.5V_ST COMMERCIAL_12V_CTL 7 8 GND +3.5V_ST MICOM_RESET 22 (GP3_Soft touch) MHL MODEL_OPT_6 NON_GED GED P120/ANI19 KEY1 MODEL1_OPT_1 10K OPT SIDE_HP_MUTE MODEL1_OPT_4 MODEL1_OPT_3 24 23 22 P27/ANI7 21 25 20 12 19 P26/ANI6 18 26 17 R3036 MODEL1_OPT_0 27 16 +3.3V_NORMAL MODEL1_OPT_2 11 15 10K OPT POWER_ON/OFF2_1 10 For Sample Set P147/ANI18 P146 P10/SCK00/SCL00 P13/TXD2/SO20 P12/SO00/TXD0/TOOLTXD 10K P14/RXD2/SI20/SDA20 P15/PCLBUZ1/SCK20/SCL20 For JAPAN P16/TI01/TO01/INTP5 For China P17/TI02/TO02 P51/INTP2/SO11 R3019 3.3K (GP4_TOOL) NON_MHL R3037 KEY2 P70/KR0/SCK21/SCL21 PDP MODEL_OPT_5 SCART_MUTE For Japan:LNB_INIT POWER_ON/OFF2_4 P25/ANI5 MODEL1_OPT_4 MODEL1_OPT_5 +3.3V_NORMAL RL_ON P71/KR1/SI21/SDA21 IR Wafer 10Pin 37 P24/ANI4 9 P11/SI00/RXD0/TOOLRXD/SDA00 12/15Pin MODEL1_OPT_3 P41/TI07/TO07 28 POWER_ON/OFF2_3 MICOM 8 R3022 MODEL_OPT_4 MODEL1_OPT_2 P40/TOOL0 P23/ANI3 R5F100GEAFB 13 MODEL1_OPT_1 IR Wafer 38 29 IC3000 P50/INTP1/SI11/SDA11 MICOM_OLED_FRC R3005-*2 22K MICOM_OLED_MAIN R3005-*1 56K MICOM_DIIVA R3012 10K MICOM_JAPAN R3009 10K MICOM_TOUCH_KEY R3007 10K MICOM_PDP R3005 10K MICOM_GP4_10PIN R3030 10K MICOM_MHL R3020 10K MICOM_GED R3016 10K MODEL_OPT_3 MODEL1_OPT_0 39 P22/ANI2 7 1 TOUCH_KEY R3024 P21/ANI1/AVREFM 30 6 P74/KR4/INTP8/SI01/SDA01 +3.5V_ST LCD / OLED RESET 31 1 P75/KR5/INTP9/SCK01/SCL01 MICOM MODEL OPTION MODEL_OPT_2 40 P20/ANI0/AVREFP +3.5V_ST TACT_KEY P124/XT2/EXCLKS 32 P30/INTP3/RTC1HZ/SCK11/SCL11 NON JAPAN 41 5 MODEL1_OPT_6 MODEL_OPT_1 42 P31/TI03/TO03/INTP4 EEPROM_SDA DIVA 43 P130 P72/KR2/SO21 JAPAN 44 33 P73/KR3/SO01 NON DIVA REGC 4 POWER_ON/OFF2_2 MODEL_OPT_0 45 P63 HDMI_CEC 0 46 P01/TO00/RXD1 IR MICOM MODEL OPTION 47 34 PANEL_CTL EEPROM_SCL 48 35 P62 MODEL1_OPT_5 R3018 3.3K SCART_MUTE 3 22 AMP_RESET_BY_MICOM SOC_RESET COMMERCIAL_12V_CTL 12V_EXT_PWR_DET 2 R3003 POWER_ON/OFF2_4 EXT_AMP_MUTE EXT_AMP_RESET P00/TI00/TXD1 I2C_SDA3 POWER_ON/OFF2_3 3 P140/PCLBUZ0/INTP6 P61/SDAA0 AMP_RESET_N POWER_ON/OFF2_3 1 4 36 P60/SCLA0 I2C_SCL3 POWER_ON/OFF2_2 2 POWER_ON/OFF2_4 POWER_ON/OFF! POWER_ON/OFF2_1 C3004 0.1uF 16V 10K 14 GP4 High/MID Power SEQUENCE R3033 VSS R3032 10K AMP_RESET_BY_MICOM VDD +3.3V_NORMAL P121/X1 C3001 C3000 0.1uF 13 P123/XT1 12 P137/INTP0 11 P122/X2/EXCLK 0.47uF 10 MICOM_RESET_SW SW3000 JTP-1127WEM 270K OPT 6 9 +3.5V_ST 4.7M OPT 10K MICOM_DEBUG R3023 R3026 4 R3027 for DiiVA 3 32.768KHz MICOM_DIIVA R3025 22 2 MICOM_DEBUG X3000 1 5 C3003 /RST_DIIVA POD_WAKEUP_N FLG_POD_DR MICOM_RESET Don’t remove R3014, not making float P40 C3002 /RST_DIIVA MICOM_DIIVA R3001 22 MICOM_DIIVA R3002 22 R3014 1K P3000 12507WS-12L R3011 10K MICOM_DEBUG MICOM_DEBUG 8pF 8pF FLG_POD_DR POD_WAKEUP_N GP4_HIGH Eye Sensor Option EXT_AMP_RESET EXT_AMP_MUTE AMP_MUTE SOC_RX INV_CTL SOC_TX SOC_RESET POWER_DET LOGO_LIGHT LED_B/GP4_LED_R R3034 4.7K OPT LOGO_LIGHT MICOM_NON_DIIVA R3013 10K MICOM_NON_JAPAN R3010 10K MICOM_TACT_KEY R3008 10K +3.3V_NORMAL MICOM_LCD/OLED R3006 10K MICOM_GP3_12/15PIN R3031 10K MICOM_NON_MHL R3021 10K MICOM_NON_GED R3017 10K MODEL1_OPT_6 For CEC POWER_ON/OFF1 EDID_WP +3.5V_ST C MODEL_OPT_4 0 1 Q3000 MMBT3904(NXP) EDID_WP E MODEL_OPT_2 N/A R3029 120K R3028 27K MC8101_ABOV (TACT_KEY) G 0 B D3000 CEC_REMOTE BAT54_SUZHO Q3001 RUE003N02 HDMI_CEC_FET_ROHM Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes S D THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. HDMI_CEC S CM3231_CAPELLA (GP4 Soft touch) D CM3231_CAPELLA (GP3 Soft touch) G 1 Q3001-*1 SI1012CR-T1-GE3 HDMI_CEC_FET_VISHAY 2011.12.12 MICOM 30 LGE Internal Use Only 5V_HDMI_4_JACK 5V_HDMI_3_JACK BODY_SHIELD R3312 4.7K EAG62611201 8 7 6 5 4 3 2 1 16 CE_REMOTE 15 0 14 CEC_REMOTE CK- 13 CK-_HDMI4_JACK CK_GND 12 CK+ CK+_HDMI4_JACK HDMI_ARC D0D0-_HDMI4_JACK D0_GND D0+ 11 10 9 8 D0+_HDMI4_JACK 7 D1D1-_HDMI4_JACK 6 D1_GND 5 D1+ D1+_HDMI4_JACK 4 D2D2-_HDMI4_JACK 3 D2_GND 2 D2+ D2+_HDMI4_JACK 1 HDMI_HPD_3_JACK E GND DDC_DATA R3328 100 DDC_CLK R3329 100 DDC_SDA_3_JACK DDC_SCL_3_JACK NC CE_REMOTE CEC_REMOTE CKCK-_HDMI3_JACK CK_GND CK+ CK+_HDMI3_JACK D0D0-_HDMI3_JACK D0_GND D0+_HDMI3_JACK D1D1-_HDMI3_JACK D1_GND IC3300 D1+ D2-_HDMI3_JACK E0 D2_GND 1 8 2 7 VCC C3300 0.1uF 16V D2+ D2+_HDMI3_JACK E1 JK3303 UI : HDMI1 JK3301 MMBD6100 D3302 MMBD6100 D3300 M24C02-RMN6T D1+_HDMI3_JACK D2- E2 RSD-105156-100 5V_HDMI_3_JACK +5V_NORMAL 5V_HDMI_1_SOC +5V_NORMAL D0+ HDMI_EXT_EDID 3 6 WC SCL UI : HDMI3 4 5 SDA C3302 0.1uF 16V R3337 R3339 47K 47K R3323 R3325 47K 47K EDID_WP RSD-105156-100 VSS R3319 22 DDC_SCL_1_SOC DDC_SCL_3_JACK DDC_SDA_1_SOC DDC_SDA_3_JACK HDMI_EXT_EDID R3320 22 HDMI_EXT_EDID 5V_HDMI_4_JACK +5V_NORMAL A1 A2 A1 5V_HDMI_2_JACK +5V_NORMAL MMBD6100 D3301 5V_HDMI_1_SOC MMBD6100 D3303 R3316 1K BODY_SHIELD C 20 HP_DET 18 17 16 15 14 13 EAG62611201 12 11 10 9 8 7 6 5 4 3 2 1 B C R3317 1K 20 HP_DET HDMI_HPD_2_JACK 19 5V E 18 GND DDC_DATA DDC_CLK 17 R3314 100 R3315 100 R3304 1K BODY_SHIELD 16 DDC_SCL_2_JACK Q3300 R3301 MMBT3904(NXP) 100K 5V R3305 1K DDC_DATA DDC_CLK R3302 100 R3303 100 HDMI_HPD_1_SOC R3321 4.7K HDMI_EXT_EDID E C3301 0.1uF 16V C3303 0.1uF 16V R3324 R3326 47K 47K R3338 R3340 47K 47K DDC_SCL_2_JACK DDC_SCL_4_JACK DDC_SDA_2_JACK DDC_SDA_4_JACK DDC_SDA_1_SOC DDC_SCL_1_SOC 15 NC B R3306 4.7K HDMI_INTERNAL_EDID GND DDC_SDA_2_JACK NC 14 CE_REMOTE CEC_REMOTE 13 CKCK-_HDMI2_JACK 12 CK_GND EAG62611201 19 Q3302 R3313 MMBT3904(NXP) 100K R3318 4.7K C C 5V_HDMI_2_JACK A2 14 9 100 R3300 ARC 11 10 R3309 17 DDC_SDA_4_JACK DDC_SCL_4_JACK 15 12 100 R3331 1K B A1 DDC_CLK R3308 5V C 18 DDC_DATA Q3303 R3327 100K MMBT3904(NXP) HP_DET 19 GND 16 13 20 HDMI_HPD_4_JACK A1 17 B E EAG62611201 18 5V C Q3301 R3307 MMBT3904(NXP) 100K HP_DET 19 C A2 R3311 1K 20 R3336 4.7K R3330 1K BODY_SHIELD C A2 R3310 1K GND CK+ CK+_HDMI2_JACK D0D0-_HDMI2_JACK D0_GND 11 10 9 8 D0+ D0+_HDMI2_JACK 7 D1-_HDMI2_JACK 6 D1D1_GND 5 D1+ D1+_HDMI2_JACK 4 D2-_HDMI2_JACK 3 D2D2_GND 2 D2+ 1 D2+_HDMI2_JACK UI : HDMI2 THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes CEC_REMOTE CKCK-_HDMI1_SOC CK_GND CK+ CK+_HDMI1_SOC D0D0-_HDMI1_SOC D0_GND D0+ D0+_HDMI1_SOC D1D1-_HDMI1_SOC D1_GND D1+ D1+_HDMI1_SOC D2D2-_HDMI1_SOC D2_GND D2+ JK3300 JK3302 RSD-105156-100 CE_REMOTE RSD-105156-100 D2+_HDMI1_SOC UI : HDMI4 HDMI 4 2011.10.29 33 LGE Internal Use Only RGB/ PC AUDIO/ SPDIF RGB_5V RGB PC +5V_NORMAL RGB_5V A1 C 8 R3642 2.7K 2.7K VCC R3645 10K RGB_EDID E1 E2 VSS 2 7 3 6 4 5 JK3602 2F11TC1-EM52-4F +3.3V_NORMAL WC EDID_WP R3643 SCL 22 SPDIF OUT RGB_DDC_SCL R3644 SDA 22 RGB_DDC_SDA C3633 18pF 50V C3634 18pF 50V R3615 33 R3620 2.7K OPT SPDIF_OUT D3613-*1 5.5V ADUC 5S 02 0R5L ESD_MTK DSUB_VSYNC D3621 ADUC 5S 02 0R5L 5.5V OPT D3615 30V OPT D3613 5.5V ADUC 5S 02 0R5L OPT C3615 0.1uF 16V VIN A VCC B GND C Fiber Optic 1 4 SHIELD R3641 IC3600 M24C02-RMN6T E0 RGB_EDID A2 MMBD6100 D3620 D3622 ADUC 5S 02 0R5L 5.5V OPT DSUB_HSYNC D3616 30V OPT RGB_DEBUG R3602 100 DSUB_B+ SOC_RX RGB_DEBUG R3647 100 PC AUDIO SOC_TX R3600 0 NON_RGB_DEBUG D3600 20V OPT R3601 0 NON_RGB_DEBUG D3601 20V OPT JK3601 KJA-PH-0-0177 5 GND 4 L 3 DETECT PC_L_IN +3.3V_NORMAL DSUB_G+ R3646 10K 1 R D3611 5.6V OPT D3611-*1 ESD_MTK 5.6V DSUB_DET PC_R_IN D3623 5.6V OPT DSUB_R+ 5 15 10 4 D3612-*1 ESD_MTK 5.6V 16 10 5 4 9 3 8 2 7 1 6 16 15 14 9 14 3 13 2 12 7 1 11 8 13 12 11 Closed to JACK 6 D3612 5.6V OPT JK3603 SLIM-15F-D-2 THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes JACK HIGH / MID 2011.11.21 36 LGE Internal Use Only HP_LOUT JK3700 KJA-PH-0-0177 +3.3V_NORMAL GND 5 R3700 10K HP_OUT HP_DET HP_ROUT L 4 DETECT 3 R 1 EAG61030001 HP_OUT VA3700 5.6V OPT ESD for MTK ESD for LG1152 VA3700-*1 VA3700-*2 5.6V 5.6V ESD_MTK_HP_OUT ESD_LG1152_HP_OUT THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes JACK_COMMON 2011.11.21 37 LGE Internal Use Only 12V_COMMERCIAL_OUT 12V 1A FOR COMMERCIAL(RS-232C POWER) 12V_COMMERCIAL_OUT CVBS 1 PHONE JACK RS232C 10 5 +3.3V_NORMAL 9 4 IR_OUT IC3800 0.1uF C1+ C3800 1 16 0.1uF +3.5V_ST V+ C3801 2 15 3 14 GND D3805 20V OPT D3804 20V OPT RS232 C1- 3 DOUT1 AV1_CVBS_DET 7 RS232 100 R3821 VCC RS232 R3810 10K 8 RS232 100 R3820 +3.5V_ST MAX3232CDR 2 JK3800 KJA-PH-1-0177 6 OPT_RS232 R3834 1 10K D3800 5.6V OPT AV_JACK_BLACK 5 M5_GND 4 M4 3 M3_DETECT 1 M1 6 M6 RS232 FOR COMMERCIAL AV1_CVBS_IN SPG09-DB-009 0.1uF C2+ C3802 4 C2- 0.1uF 13 RIN1 JK3803 RS232 RS232 V- C3803 5 12 6 11 7 10 8 9 ROUT1 DIN1 RS232 DOUT2 RIN2 DIN2 AV1_L_IN AV_JACK_YELLOW ROUT2 JK3800-*1 KJA-PH-1-0177-1 SOC_RX 5 D3801 5.6V M5_GND OPT EAN41348201 SOC_TX UART_4PIN_STRAIGHT +3.5V_ST R3811 4.7K R3814 OPT OPT UART_4PIN_ANGLE P3800 P3801 12507WS-04L 12507WR-04L +3.5V_ST 4 M4 3 M3_DETECT 1 M1 6 M6 AV1_R_IN 4.7K 1 1 2 2 3 3 D3802 5.6V OPT 4 4 5 5 ESD For MTK COMPONENT 1 PHONE JACK ESD For LG1152 D3803-*1 5.6V ESD_MTK +3.3V_NORMAL D3800-*1 5.6V ESD_MTK R3806 10K D3803-*2 5.6V ESD_LG1152 D3800-*2 5.6V ESD_LG1152 COMP1_DET D3801-*1 5.6V D3803 5.6V COMP_JACK_BLACK ESD_MTK OPT JK3801 KJA-PH-1-0177 5 M5_GND 4 M4 3 M3_DETECT 1 M1 6 M6 D3802-*1 5.6V COMP1_Y ESD_MTK D3801-*2 5.6V ESD_LG1152 D3802-*2 5.6V ESD_LG1152 COMP1_Pb COMP_JACK_GREEN JK3801-*1 KJA-PH-1-0177-2 THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 5 M5_GND 4 M4 3 M3_DETECT 1 M1 6 M6 COMP1_Pr JACK_COMMON 2011.11.21 38 LGE Internal Use Only +3.5V_ST IR & KEY RGB Sensor EEPROM_SCL C KEY2 C4100 0.1uF +3.5V_ST R4107 10K B E EEPROM_SDA R4114 100 +3.5V_ST COMMERCIAL_IR R4103 3.3K R4102 10K IR Q4100 MMBT3904(NXP) COMMERCIAL_IR KEY1 COMMERCIAL_IR R4101 1K R4104 47K COMMERCIAL_IR C IR_BYPASS +3.5V_ST E C4102 0.1uF R4124 100 1 2 D4101 5.6V AMOTECH CO., LTD. OPT D4106 ADUC 20S 02 010L 20V OPT D4100 5.6V AMOTECH CO., LTD. OPT 3 4 5 L4100 BLM18PG121SN1D B Q4101 MMBT3904(NXP) COMMERCIAL_IR P4102 12507WR-10L D4105 ADUC 20S 02 010L 20V OPT R4113 100 COMMERCIAL +3.5V_ST GP4_IR_10P R4123 100 R4118 10K 5% R4117 10K 5% 6 COMMERCIAL_IR C4104 1000pF 50V R4125 1.5K LED_B/GP4_LED_R 7 8 R4100 0 9 IR_BYPASS COMMERCIAL C4107 100pF 50V +3.5V_ST D4104 5.6V OPT AMOTECH CO., LTD. COMMERCIAL_IR_EU 10 11 +3.5V_ST R4109 1K COMMERCIAL_IR R4105 22 IR_OUT COMMERCIAL_IR Q4102 MMBT3904(NXP) COMMERCIAL_IR_EU C R4115 COMMERCIAL_IR_EU3.3K R4111 10K B E R4119 47K C B Q4104 MMBT3904(NXP) COMMERCIAL_IR R4108 0 COMMERCIAL_IR_US E COMMERCIAL_IR Soft Touch Micom D/L Zener Diode is close to wafer ESD for MTK ESD for LG1152 D4105-*1 ADUC 20S 02 010L 20V 10pF ESD_MTK D4106-*1 ADUC 20S 02 010L 20V 10pF ESD_MTK D4100-*2 D4100-*1 200pF 5.6V ADMC 5M 02 200L 200pF 5.6V ADMC 5M 02 200L ESD_LG1152 ESD_MTK D4101-*2 D4101-*1 5.6V 200pF ADMC 5M 02 200L ESD_MTK D4104-*1 5.6V 200pF ADMC 5M 02 200L ESD_MTK THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 5.6V 200pF ADMC 5M 02 200L ESD_LG1152 D4104-*2 5.6V 200pF ADMC 5M 02 200L ESD_LG1152 IR / KEY 2011.11.21 41 LGE Internal Use Only +3.3V_NORMAL +5V_USB FOR USB1 R4327 10K OPT MAX 2A R4323 10K POWER_ON/OFF2_4 IC4303 TPS2554 11 3AU04S-305-ZC-(LG) JK4303 1 R1 R4336 20K ILIM1 OPT C4338 1000pF 50V USB_DM1 2 C4328 0.01uF 50V C4334 4700pF 50V 6 1% R2 2K R4339 USB_DP1 Vout=0.8*(1+R1/R2) DVR Ready MAX 1.8A 3 C4332 47pF 50V VSENSE 5 10uF 10V ILIM0 USB DOWN STREAM 5 USB_CTL1 7 4 4 EN COMP 4 USB1 C4323 OUT_1 5 6 8 OPT RCLAMP0502BA D4303 3A /USB_OCD1 3 OUT_2 R4300 27K OPT 330K R4329 SS/TR 3 ILIM_SEL GND 9 FAULT 1/10W EN 7 2 10 1/10W C4326 0.1uF 50V 8 2 C4336 0.1uF 16V 1 [EP] OPT R4341 27K C4324 10uF 35V 1 C4333 22uF 10V 1% VIN IN_2 820 R4343 BLM18PG121SN1D PH IN_1 1% BOOT GND L4308 6.8uH 10K R4338 L4305 IC4305 TPS54331D 40V 0 R4330 C4329 D4304 SMAB34 16V 0.1uF +24V 40V C4327 0.1uF 16V THERMAL D4304-*1 SX34 R4328 10K R4332 POWER_ON/OFF2_4 IC4306 10K C4300 0.1uF 16V SN1104041, DC-DC+2CH USB SW +12V LX_2 17 DEV_USB_DCDC_BD86180 IC4306-*1 BD86180MUV SS RT CTL2 CTL1 FLG2 FLG1 USB_OUT2 GND_1 GND_2 USB_OUT1 1 2 3 24 25 COMP THERMAL EN 23 22 4 21 5 20 6 19 7 18 8 17 9 16 10 15 11 14 12 13 [EP]GND VREG GND_3 C4337 22uF 10V C4301 22uF 10V LX_1 16 VIN_2 SW_IN_3 VIN_1 15 PGND_2 PGND_1 SW_IN_2 BST SW_2 14 7 8 9 10 11 USB2 MAX 1.5A OPT 10K R4303 OPT R4304 10K 10K ROSC USB_DCDC_SN1104041 C4340-*1 0.01uF 50V USB_DCDC_BD86180 USB_DCDC_SN1104041 EN_SW2 +5V_USB_2 3AU04S-305-ZC-(LG) JK4302 USB_CTL2 1 EN_SW1 /USB_OCD2 NFAULT2 2 6 C4340 4700pF 50V USB_DM2 NFAULT1 USB_DP2 SW_OUT2 +5V_USB_3 C4322 10uF 10V AGND_1 AGND_2 3 C4331 0.1uF 16V 18 5 C4342 100pF 50V USB DOWN STREAM L4307 3.6uH 19 4 SS 4 BST +5V_USB 20 5% 3 5 PGND_1 21 COMP OPT RCLAMP0502BA D4302 PGND_2 22 2 R4342 10K 10K VIN_1 C4325 10uF 16V 23 +3.3V_NORMAL EN R4301 VIN_2 USB_DCDC_SN1104041 AGND_3 THERMAL L4306 BLM18PG121SN1D 1 24 25 V7V C4341 4.7uF 10V R4302 [EP]GND +5V_USB_2 SW_1 USB_IN_3 SW_IN_1 USB_IN_2 13 12 SW_OUT1 USB_IN_1 USB3 MAX 1.5A +5V_USB_3 2 ESD for LG1152 4 ESD_LG1152 RCLAMP0502BA D4300-*2 10uF 10V 5 C4310 3 OPT RCLAMP0502BA D4300 ESD for MTK USB DOWN STREAM 1 3AU04S-305-ZC-(LG) JK4300 ESD_LG1152 RCLAMP0502BA D4302-*1 USB_WIFI +5V_USB L4302 WIFI 120-ohm BLM18PG121SN1D ESD_LG1152 RCLAMP0502BA D4303-*3 From SoC C4319 0.1uF 16V C4320 0.1uF 16V WIFI WIFI C4321 10uF 10V WIFI C4339 10uF 10V WIFI MAX 0.4A P4301 USB_DM3 12507WR-04L For EMI WIFI VDD USB_DP3 DM USB_CTL3 WIFI_DM /USB_OCD3 DP WIFI_DP GND 1 2 3 4 5 . THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes USB3_HUB_WiFi 2011.10.26 43 LGE Internal Use Only ZigBee_Radio Pulse M_REMOTE OPTION +3.3V_NORMAL P4800 12507WR-08L L4800 120-ohm M_REMOTE 1 M_REMOTE 3.3V C4800 2 3 4 5 6 7 8 GND 0.1uF AR4800 100 1/16W RX M_REMOTE_RX TX M_REMOTE_TX RESET M_RFModule_RESET DC M_RFModule_ISP DD 3D_SYNC_RF GND M_REMOTE 9 3D_SYNC_RF Only For PDP ALL M_REMOTE OPTION THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes MOTION REMOTE 2011.11.21 48 LGE Internal Use Only Ethernet Block LAN_JACK_POWER C5000 0.1uF 16V C5001 0.01uF 50V C5002 0.1uF 16V C5003 0.01uF 50V JK5000 XRJH-01A-4-DA7-180-LG(B) LAN_XML 1 2 3 4 5 6 7 8 9 10 11 D1 D2 D3 D4 P1[CT] P2[TD+] EPHY_TDP P3[TD-] EPHY_TDN P4[RD+] EPHY_RDP P5[RD-] EPHY_RDN P6[CT] P7 D5000 D5001 D5002 5.5V OPT 5.5V OPT 5.5V OPT D5003 5.5V OPT P8 P9 P10[GND] P11 YL_C YL_A GN_C GN_A ESD for MTK ESD for LG1152 12 ESD_LG1152 SHIELD D5000-*1 ESD_MTK D5000-*2 ADUC 5S 02 0R5L 5.5V ADUC 5S 02 0R5L ESD_LG1152 D5001-*1 ESD_MTK ADUC 5S 02 0R5L D5001-*2 5.5V ADUC 5S 02 0R5L JK5000-*1 TLA-6T764 ESD_LG1152 LAN_TDK 1 2 3 R1 R2 R3 D5002-*1 ESD_MTK D5002-*2 ADUC 5S 02 0R5L 4 5 6 7 8 9 10 11 D1 D2 D3 D4 R4 5.5V ADUC 5S 02 0R5L R5 R6 ESD_LG1152 R7 R8 D5003-*1 R9 R10[GND] ESD_MTK D5003-*2 ADUC 5S 02 0R5L 5.5V ADUC 5S 02 0R5L R11 YL_C YL_A GN_C GN_A 12 SHIELD THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LAN_VERTICAL 2011.12.09 50 LGE Internal Use Only +3.3V_NORMAL DUAL COMPONENT C5415 1000pF 50V 2ND : 0TR387500AA 50V 1ST : 0TRIY80001A C5416 L5401 BLM18PG121SN1D AUD_MASTER_CLK +24V_AMP 22000pF Q1801 AMP_RESET_N OPT R5406 3.3 3 LF 4 DGND_PLL 5 GND_1 6 10K E PVDD1_1 PVDD1_2 PVDD1_3 OUT1A_1 OUT1A_2 BST1A /RESET AD PGND1A 37 38 39 40 41 42 43 PGND1B R5414 12 33 BST1B 32 VDR1 31 VCC_5 28 BST2A WCK 10 27 PGND2A BCK 11 26 OUT2A_2 SDA 12 25 OUT2A_1 R5408 12 5.1K C5434 0.47uF 50V SPEAKER_L C5437 0.1uF 50V NRS6045T100MMGK R5412 12 R5416 5.1K C5425 22000pF 50V WAFER-ANGLE 4 SPK_L- 3 SPK_R+ C5427 1uF 25V C5428 1uF 25V C5433 1uF 25V 2 SPK_R- 1 C5426 22000pF 50V P5400 24 23 22 21 20 19 18 C5430 390pF 50V D5401 1N4148W 100V OPT C5436 0.1uF 50V NRS6045T100MMGK R5415 SPK_L+ 9 0x54 L5404 10.0uH SPK_L- SDATA C5417 22000pF PVDD2_3 PVDD2_2 PVDD2_1 SPK_R+ OUT2B_2 B 34 VDR2 OUT2B_1 R5400 AMP_MUTE 100 C5404 1000pF Q5400 50V MMBT3904(NXP) OUT1B_1 AGND PGND2B C 35 29 BST2B R5405 OUT1B_2 30 SCL R5401 10K 36 8 17 C5408 33pF 50V C5406 33pF 50V +3.3V_NORMAL R5407 12 L5405 10.0uH 7 MONITOR2 100 IC5400 NTP-7500L 16 I2C_SCL1 100 SPK_L+ DVDD AUD_SCK R5403 OPT C5424 0.01uF 50V D5400 1N4148W 100V OPT DGND AUD_LRCK R5402 THERMAL 49 15 C5412 0.1uF 16V DVDD_PLL 44 2 45 AVDD_PLL 3.3K 46 1 47 AGND_PLL AUD_LRCH I2C_SDA1 C5422 10uF 35V C5420 0.1uF 50V C5429 390pF 50V MONITOR1 R5404 OPT C5410 10uF 10V C5418 0.1uF 50V C5411 0.1uF 16V 14 OPT C5409 10uF 10V MONITOR0 100pF 50V C5407 4.7uF 10V /FAULT C5402 C5403 1000pF 50V OPT C5405 10uF 10V 48 C5401 0.1uF 50V 13 C5400 0.1uF 50V GND_IO 16V CLK_I 0.1uF L5400 CIS21J121 C5414 10uF 10V [EP] C5413 VDD_IO +24V_AMP +24V +24V_AMP D5402 1N4148W 100V OPT R5409 12 R5413 12 C5419 C5421 C5423 0.1uF 50V 0.1uF 50V 10uF 35V D5403 1N4148W 100V OPT L5403 10.0uH C5432 390pF 50V R5410 12 L5402 10.0uH NRS6045T100MMGK C5431 390pF 50V NRS6045T100MMGK R5411 12 C5435 0.47uF 50V C5438 R5417 0.1uF 50V 5.1K C5439 R5418 0.1uF 50V 5.1K SPEAKER_R 50V WOOFER_MUTE SPK_R- WOOFER_MUTE TP5403 THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes AMP_NEO 2011.11.21 54 LGE Internal Use Only +3.3V_NORMAL EARPHONE AMP L6100 120-ohm BLM18PG121SN1D C6105 10uF 10V C6107 0.1uF 16V HP_LOUT_AMP C6104 1uF 10V C6100 1uF 10V 16 INL- 15 +3.3V_NORMAL EN VDD SGND OUTL Close to the IC 14 13 1 12 2 11 HPVDD C6108 2.2uF 10V R6104 100K OPT R6105 4.7K HP_LOUT_MAIN C6103 1uF 10V INR- HP_ROUT_MAIN 10 3 4 6 THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes G0 R6103 4.7K OUTR R6100 4.7K R6101 OPT 5 R6102 4.7K OPT 9 EAN60724701 7 C CPP PGND C6109 2.2uF 10V Q6100 MMBT3904(NXP) B E R6107 1K SIDE_HP_MUTE From Micom CPN 8 HPVSS INR+ IC6100 TPA6132A2 G1 INL+ OPT R6106 0 HP_ROUT_AMP C6106 2.2uF 10V HEADPHONE AMP 2011.09.29 61 LGE Internal Use Only T/C/S & H/NIM & T2/C TUNER(EU & CHINA) RF_SWITCH_CTL USE: T2/C,T/C,ATSC,DTMB.ISDB-T TU6501 TDSN-G351D TU6500 TDSS-G151D TU6504 TDSH-T151F TU6502 TDSQ-H051F TU6503 TDSQ-G051D +3.3V_TU CHB +5V_TU L6508 BLM18PG121SN1D RESET T/C_H/NIM_V 1 2 NC T2/C_F/NIM_DEV NC_1 1 RESET CHB_V 2 RESET 3 SCL T/C/S2_V +5V[SPLITTER] 1 1 2 RESET 3 TU_SCL CHB N.C_1 RF_SWITCH OPT R6511 100K C6520 0.1uF 16V BR_TW_CN_TUNER R6500-*1 1K TW_H/NIM CHB_CVBS CHB_ERR L9_T2/C/S ATV_OUT CHB_SYNC IC6500 74LVC1G08GW ERROR & VALID PIN CHB_VAL close to TUNER RF_S/W_CTL LNB_TX LNB_OUT 5% CHB_DATA /TU_RESET TU_TS_VAL B 1 3 SDA 4 +B1[3.3V] SIF 5 6 +B2[1.8V] CVBS 7 8 IF_AGC DIF[P] DIF[N] 9 10 11 SCL SDA +B1[3.3V] SIF +B2[1.8V] CVBS IF_AGC DIF[P] DIF[N] 4 SDA 5 +B1[3.3V] 6 SIF L9_T2/C/S C6544 TU_TS_ERR A 2 RESET 2 3 SCL 3 C6503 0.1uF 16V R6500 GND 0 BR_TW_CN_TUNER R6508-*1 R6508 100 1K 3 SHIELD TU_SDA 5 M_+3.3V 6 M_SIF 4 SDA 5 +3.3V_TUNER 6 SIF 4 5 6 +B2[1.8V] 8 CVBS 8 M_CVBS 8 CVBS 8 9 NC_2 9 M_IF_AGC 9 T/C_IF_AGC 9 M_+1.8V 7 +1.8V_TUNER 7 C6551 100pF 50V C6550 0.1uF 16V C6500 10 M_DIF[P] 10 T/C_DIF[P] 10 11 NC_4 11 M_DIF[N] 11 T/C_DIF[N] 11 +B3[3.3V] 12 S_3.3V 12 N.C_2 12 0.1uF 16V R6506 13 N.C_3 13 NC_5 14 S_CVBS 14 N.C_4 14 close to TUNER C6507 100pF 50V R6518 82 R6520 220 TUNER_SIF E R6521 220 2012 perallel because of derating E C R6515 4.7K Q6500 MMBT3906(NXP) B R6519 1K C T/C_H/NIM Q6501 MMBT3906(NXP) T/C/S2 T/C&AT&CHB OPT 1. should be guarded by ground IF_AGC2. No via on both of them 3. Signal Width >= 12mils Signal to Signal Width = 12mils Ground Width >= 24mils 100 T/C&AT&CHB CHB C6523 100pF 50V C6510 1000pF 50V CN C6513 4700pF 50V CN NOT_DVB_S T2/C_F/NIM DVB_S NOT_T/C&AT +1.8V_TU 15 GND_1 15 16 16 ERROR 16 17 SD_SYNC 17 SYNC 17 VALID 18 SD_VALID 18 VALID 18 MCLK 19 SD_MCLK 19 MCLK 19 D0 20 SD_SERIAL_D0 20 D0 20 D1 21 N.C_1 21 D1 21 NOT_T/C&AT&CHB AR6501 0 FE_TS_DATA[0] D2 22 N.C_2 22 D2 22 FE_TS_DATA[1] D3 23 N.C_3 23 D3 23 FE_TS_DATA[3] D4 24 N.C_4 24 D4 24 FE_TS_DATA[4] D5 25 N.C_5 25 D5 25 D6 26 N.C_6 26 D6 26 27 N.C_7 27 D7 27 GND_2 28 GND_2 28 29 GND_3 CHB T2/C DVB_S&CHB DVB_S&CHB T2/C&CN NOT_T/C&AT T/C&AT&CHB BR CN CN T/C&AT&CHB NOT_DVB_S NOT_T/C&AT NOT_T/C&AT Not_L9_T2/C/S T2/C T2/C&CHB&CN RF_SWITCH Not_L9_T2/C/S NOT_DVB_S NOT_T/C&AT&CHB T/C&AT&CHB T2/C&CN NOT_T/C&AT&CHB NOT_T/C&AT&CHB CHB L6507 AT_H/NIM CHB DVB_S DVB_S&CHB Not_L9_T2/C/S NOT_T/C&AT NOT_DVB_S T2/C&CHB&CN T2/C&CHB&CN Not_L9_T2/C/S H/NIM&CHB Not_L9_T2/C/S NOT_T/C&AT&CHB Not_L9_T2/C/S C6516 BLM18PG121SN1D 0.1uF 16V T2/C&CHB&CN&BR SD_ERROR T2/C/S2 +3.3V_D_Demod OPT C6528 10uF 6.3V +1.23V_TU GND_1 T2/C&CHB&CN&BR OPT C6525 0.1uF 16V T2/C&CN&BR L6502 BLM18PG121SN1D 15 ERROR R6516 470 +1.8V_TU C6509 0.1uF 16V CHB S_1.8V NOT_L9_T2/C/S B 16V IF_N 13 R6525 0 +5V_TU +5V_TU TU_CVBS C6522 0.1uF should be guarded by groumd IF_P +B4[1.23V] GND BR_TW_CN_TUNER C6506-*1 68pF 50V close to TUNER C6514 0.1uF 16V C6505 0.1uF 16V close to Tuner NC_3 BR_TW_CN_TUNER C6508-*1 68pF 50V L6500 BLM18PG121SN1D L9 ATSC 10 SHIELD I2C_SDA6 +3.3V_TU 7 FE_TS_VAL 1/16W 5% L9_T2/C/S 5% I2C_SCL6 C6511 100pF 50V R6526 100 Y 4 ATV_OUT R6509 C6508 33 18pF R6510 OPT 50V 33 C6506 OPT 18pF 50V 0.1uF 16V 2 MTK/L9_DVB/ATSC/NTSC RF_SWITCH RF_SWITCH_CTL C6501 10uF 10V 1 7 12 12 4 VCC 5 MTK/L9_DVB/ATSC/NTSC SCL +3.3V_TU CHB_CLK CHB_CVBS L9_T2/C/S CHB_ERR SYNC CHB_SYNC CHB_VAL NOT_T/C&AT&CHB AR6500 0 CHB_CLK TU_TS_ERR FE_TS_SYNC TU_TS_VAL FE_TS_CLK CHB_DATA FE_TS_DATA[0-7] T2 : Max 1.7A else : Max 0.7A FE_TS_DATA[2] FE_TS_DATA[5] FE_TS_DATA[6] FE_TS_DATA[7] NOT_T/C&AT D7 +3.3V_TU_IN AR6502 0 NOT_T/C&AT&CHB IC6501 AP2132MP-2.5TRG1 +1.23V_TU [EP] NOT_T/C&AT R6527 R2 20K 1% NOT_T/C&AT R6528 11K 1% R6529 R1 10K 1% Seperate GND for CHB 29 SD_1.23V_DEMOD 30 +1.23V_S2_DEMOD 30 SD_RESET S2_RESET 31 SD_3.3V_DEMOD32 N.C_8 DVB_S&CHB L6501 BLM18PG121SN1D 2 +1.23V_TU C6512 100pF C6515 0.1uF DVB_S&CHB C6519 10uF 10V DVB_S&CHB 10uF 16V C6521 0.1uF OPT S2_F22_OUTPUT 33 10 DVB_S&CHB GND 3 NOT_T/C&AT C6533 +3.3V_D_Demod OPT R6512 2.2K R6513 +3.3V_S2_DEMOD 32 33 EN R6523 10K DVB_S&CHB 31 8 PG 9 GND_3 SHIELD 1 C6540 0.1uF THERMAL 28 7 ADJ 6 VOUT VIN 2A 4 +5V_NORMAL CN R6528-*1 12K 1/16W 1% NOT_T/C&AT 5 NC VCTRL NOT_T/C&AT C6549 EAN61387601 /S2_RESET 10uF +3.3V_D_Demod 16V OPT SD_SCL 34 S2_SCL 34 SD_SDA 35 S2_SDA 35 LNB 36 C6524 100pF LNB_TX R6503 36 GND_4 38 OPT C6517 18pF 50V OPT C6518 18pF 50V 22 C6527 0.1uF OPT C6535 1uF OPT Vout=0.6*(1+R1/R2) I2C_SCL4 DVB_S&CHB CHB : Max 480mA else : Max 240mA 37 R6504 SHIELD LNB_OUT SHIELD 22 I2C_SDA4 DVB_S&CHB +3.3V_TU +3.3V_D_Demod IC6503 NOT_T/C&AT L6506 BLM18PG121SN1D AZ1117BH-1.8TRE1 NOT_T/C&AT C6531 0.1uF BR_F/NIM_V CN_ATBM TU6501-*1 TDSN-B051F 2 3 4 5 6 7 AT_H/NIM_V TU6500-*1 TDSS-H151F 8 9 10 1 2 3 4 5 6 7 8 9 10 11 NC 11 12 RESET 13 SCL 14 SDA 15 +B1[3.3V] 16 SIF 17 18 +B2[1.8V] 19 CVBS 20 IF_AGC 21 DIF[P] 22 23 DIF[N] 24 25 12 26 SHIELD 27 28 RF_S/W_CTL 1 RESET 2 SCL 3 SDA 4 +B1[3.3V] 5 SIF 6 +B2[1.8V] 7 CVBS 8 NC_1 9 NC_2 10 NC_3 11 +B3[3.3V] 12 +B4[1.23V] 13 NC_4 14 GND 15 ERROR 16 SYNC 17 VALID 18 MCLK 19 D0 20 D1 21 D2 22 D3 23 D4 24 D5 25 D6 26 D7 27 RF_S/W_CTL 2 RESET 1 SCL 2 SDA 3 +B1[3.3V] 4 RF_S/W_CTL 3 RESET 4 5 SIF 5 SCL 6 SDA 7 +B1[3.3V] 8 9 +B2[1.8V] 6 CVBS 7 NC_1 8 SIF 10 +B2[1.8V] 11 CVBS 12 13 NC_2 9 NC_3 10 +B3[3.3V] 11 NC_1 14 NC_2 15 NC_3 16 17 +B4[1.23V] 12 NC_4 13 GND 14 +B3[3.3V] 18 +B4[1.23V] 19 20 NC_4 21 ERROR 15 SYNC 16 VALID 17 MCLK 18 D0 19 D1 20 D2 21 GND 22 ERROR 23 SYNC 24 25 VALID 26 MCLK 27 28 D0 29 D3 22 D4 23 D1 30 D2 31 D3 32 33 D5 24 D6 25 D7 26 27 D4 34 D5 35 36 D6 D7 28 38 37 SHIELD SHIELD SHIELD THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes IN 3 2 OUT 1 R6531 1 ADJ/GND TU6503-*1 TDSQ-G351D TU6501-*3 TDSN-C051D 28 SHIELD NOT_T/C&AT C6542 0.1uF C6538 10uF 10V T2/C/S2 CN_LG3921 TU6501-*2 TDSN-C251D 1 1 +1.8V_TU +3.3V_TU N.C_1 RESET C6546 10uF 10V SCL SDA +B1[3.3V] SIF +B2[1.8V] Close to the tuner C6548 0.1uF 16V CVBS N.C_2 N.C_3 N.C_4 +B3[3.3V] +B4[1.23V] N.C_5 GND_1 ERROR BR_TW_CN_TUNER R6532-*1 BLM18PG121SN1D 465mA(MAX) SYNC VALID MCLK 150mA(MAX) D0 D1 D2 120-ohm D3 D4 D5 +3.3V_NORMAL +3.3V_TU D6 +5V_TU +5V_NORMAL D7 GND_2 GND_3 +B5[1.23V] S2_RESET +B6[3.3V] S2_F22_OUTPUT MTK/L9_DVB/ATSC/NTSC R6532 0 L6503 BLM18PG121SN1D S2_SCL S2_SDA LNB GND_4 C6526 0.1uF 16V C6529 22uF 10V C6530 0.1uF 16V Close to the tuner TUNER C6532 0.1uF 16V C6534 22uF C6536 22uF 10V 10V C6539 0.1uF 16V Close to the tuner 2011.11.21 65 LGE Internal Use Only FOR COMMERCIAL 12V OUT RS-232C 9 PIN (OPT:COMMER_EXT_12V) R7001 100 IC7000 MP5000DQ GND C7000 470pF 50V DV/DT 1 10 2 9 SOURCE_5 +3.5V_ST FOR COMMERCIAL AUDIO OUT (OPT:COMMER_EXT_AMP) SOURCE_4 12V_COMMERCIAL_OUT R7000 1K ENABLE/FAULT COMMERCIAL_12V_CTL FOR 12V CONTROL (FROM MICOM) I-LIMIT NC 3 8 4 7 5 6 R7006 10K SOURCE_3 L7000 BLM18PG121SN1D SOURCE_1 C7003 22uF 25V C7004 0.1uF 50V 12507WR-12L +24V R7004 100K C 11 B VCC P7000 12V_EXT_PWR_DET SOURCE_2 L7001 BLM18PG121SN1D Q7001 MMBT3904(NXP) 1 C7005 0.1uF 50V +12V 2 E C7001 1uF 25V R7005 22K C7002 22uF 25V 3 AUDIO_L_OUT_COMMERCIAL 4 5 AUDIO_R_OUT_COMMERCIAL 6 EXT_AMP_RESET 7 FOR AMP RESET (MAIN SOC) EXT_AMP_MUTE 8 9 SPK_L_OUT_COMMERCIAL PATTERN SHOULD BE CONSIDERED (MAX 3W) AUDIO OUT JACK (OPT:COMMER_EXT_AMP) SPK_L_OUT_COMMERCIAL SPK_R_OUT_COMMERCIAL THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes C7006 10uF 16V C7007 10uF 16V D7000 5.6V D7001 5.6V SPK_R_OUT_COMMERCIAL COMMER_EXT_AMP_JACK JK7000 KJA-PH-0-0177 GND 5 L 4 DETECT 3 R 1 10 11 12 13 EAG61030001 COMMERCIAL_OPTION 2011.11.21 70 LGE Internal Use Only LVDS LVDS_51PIN P7100 FI-RE51S-HF-J-R1500 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 [51Pin LVDS OUTPUT Connector] NC NC R7100 33 LGD_2D/3D_CTRL [41Pin LVDS OUTPUT Connector] 2D/3D_CTL LVDS_SEL NC NC NC AUO_65_MIRROR R7105 33 CP_BOX R7106 33 CP_BOX +3.3V_NORMAL I2C_SDA1 I2C_SCL1 R7101 3.3K LVDS_SEL_HIGH LVDS_SEL NC NC L/DIM_ENABLE GND LVDS_41PIN P7101 FI-RE41S-HF-J-R1500 R7107 33 PWM_DIM1 R7102 10K LVDS_SEL_LOW LGD_32/37_LVDS_PWM R7108 33 1 OPC_EN 2 LGD_32/37_LVDS_OPC 3 RA0N TXA0N 4 RA0P TXA0P 5 RA1N TXA1N 6 RA1P TXA1P 7 RA2N TXA2N 8 RA2P TXA2P 9 GND 10 RACLKN TXACLKN 11 RACLKP TXACLKP GND 12 RA3N 13 TXA3N 14 RA3P TXA3P 15 RA4N TXA4N 16 RA4P TXA4P 17 GND 18 BIT_SEL BIT_SEL 19 RB0N TXB0N R7103 10K BIT_SEL_LOW RB0P TXB0P 20 21 RB1N TXB1N 22 RB1P TXB1P 23 RB2N TXB2N 24 RB2P TXB2P 25 GND 26 RBCLKN TXBCLKN 27 RBCLKP TXBCLKP 28 GND 29 RB3N TXB3N 30 RB3P TXB3P 31 RB4N TXB4N 32 RB4P TXB4P GND 33 GND 34 35 GND GND PANEL_VCC 36 37 GND NC VLCD L7100 BLM18SG121TN1D LVDS_51PIN 38 39 40 VLCD VLCD VLCD 41 C7100 10uF 16V OPT C7101 1000pF 50V OPT C7102 0.1uF 50V OPT NC NC NC 2D/3D_CTL R7104 33 AUO_2D/3D_CTRL NC NC NC NC NC GND RC0N TXC0N RC0P TXC0P RC1N TXC1N RC1P TXC1P RC2N TXC2N RC2P TXC2P GND RCCLKN TXCCLKN RCCLKP TXCCLKP GND RC3N TXC3N RC3P TXC3P RC4N TXC4N RC4P TXC4P GND GND RD0N TXD0N RD0P TXD0P RD1N TXD1N RD1P TXD1P RD2N TXD2N RD2P TXD2P GND RDCLKN TXDCLKN RDCLKP TXDCLKP GND RD3N TXD3N RD3P TXD3P RD4N TXD4N RD4P TXD4P GND GND 42 GND 52 GND THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LVDS_HIGH_MID 2011.08.11 71 LGE Internal Use Only LOCAL DIMMING [To LED DRIVER] P7600 12507WR-08L L/DIM_OUT +3.3V_NORMAL R7600 10K OPT 1 2 R7601 10K L/DIM_OUT AR7600 33 1/16W 3 L/DIM0_SCLK 4 5 L/DIM0_MOSI 6 I2C_SCL1 7 8 L/DIM_OUT I2C_SDA1 R7606 33 L/DIM0_VS L/DIM_OUT 9 THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes R7607 4.7K L/DIM_OUT LOCAL DIMMING 2011.12.13 76 LGE Internal Use Only VCOM_P VCOM_N VCOM_LOOP VCC18 L7700 0 R7708 GMA4 DYN VCOMFB POS NEG VCOM GMA6 GMA5 GMA4 GMA3 GMA2 GMA1 45 44 43 42 41 40 39 38 37 32 TPS65178RSLR 31 CTRLP SWB2 6 7 30 TCOMP 8 29 VL SWB1_2 9 28 SDA 1/16W R7739 1.5K 1/16W 5% C7756 1uF 25V C7733 10uF 16V C7746 C7748 1uF 25V 1uF 25V D7704 1N4148W VGH SWP CTRLP E R7727 C7722 10uF 16V 0 1/16W VDD B C7731 0.1uF 16V OPT C7740 1000pF 50V R7746 100V 100K C7755 1uF 50V D7706 1N4148W 100V C7757 1uF 50V R7744 20K 1/10W 5% C COMP C7736 1000pF 50V R7750 20K 1/10W 5% C7754 0.1uF 50V Q7701 MMBT3906(NXP) VDD VCC18 VCC18 L7704 22uH C7702 0.01uF 50V C7739 0.1uF 50V R7718 C7730 68uF 35V C7729 1000pF R7713 2.2 PANEL_VCC C7700 0.01uF 50V C7727 0.1uF 50V VGH_FB C7737 0.1uF 50V C7701 0.1uF 50V D7705 1N4148W 100V 1/16W 5% C7715 10uF 16V 0 INSTEAD OF AMCC0209 SS L7703 NR6020T6R8NC 6.8uH R7729 2.7K 1/16W C7703 0.1uF 50V 1uF 25V 24 23 SWO COMP [Right Source(41PIN LOCATION)] [Left Source(51PIN LOCATION)] 1uF 25V C7742 1uF 25V I2C_SCL2 R7717 33K 1/16W H_VDD VGL R7745 VL TCOMP C7724 1uF 25V THIS IS REVERSE PATTERN !!!! C7747 SWN SS AGND SWI SW_2 PGND_2 OPT 22 SS 21 COMP 25 20 26 12 19 27 11 PVINB1_2 18 10 SCL C7745 VGH_FB I2C_SDA2 NC 10uF 25V PVINB1_1 VGL_FB 100V CTRLP VGH PGND2 C7716 10uF 25V C GMA5 PGND4 35 VGL SWP PGND_1 C7714 10uF 25V CTRLN SWN 17 C7713 10uF 25V 36 33 PGND3 D7700 SX34 40V D7703 1N4148W SWP 34 EPI 100K 1/16W 5% CTRLN IC7700 16 C7721 OPT 5 THERMAL 49 OUT3 PANEL_VCC 4 15 C7712 1uF 10V 3 OUT2 SWB3 C7711 10uF 10V 2 RST OUT1 13 C7710 10uF 10V 22uH 1 SWB4 AVIN C7704 0.1uF 16V R7700 2K 1/16W R7728 SWN SWB1_1 L7702 C7728 10uF 10V OPT 46 [EP]AGND OUT4 VCC C7707 10uF 10V OPT 47 10K 1/16W INSTEAD OF AMCC0208 1/16W Q7700 MMBT3904(NXP) VGL_FB R7701 LQM2HPN2R2MG0L 2.2uH R7760 0 CTRLN 48 VCC 14 C7709 10uF 10V C7706 10uF 10V OPT L7701 PVINB3 PMIC_RESET TO SOC 1/16W FROM SOC R7759 0 1/16W R7737 OPT 1/16W E VCOM_DYN 1/16W R7725 0 VCC R7730 OPT 1/16W 0 B R7710 GMA7 1/16W Vcore L7705 BLM18PG121SN1D OPT 0 VCOMLFB GMA12 R7709 GMA15 1/16W LQM2HPN2R2MG0L 2.2uH SW_1 C7708 10uF 10V OPT GMA14 VCOMRFB C7705 10uF 10V 9.1K VL 1/16W 1/16W 50V OPT OPT D7701 SX34 R7720 47K 1/16W 5% 40V C7723 10uF 25V TCOMP C7734 0.1uF 50V C7725 10uF 25V C7738 0.1uF 50V C7732 0.1uF 50V C7735 68uF 35V OPT TH7700 47k-ohm NCP18WB473F10RB R7722 100K 1/16W 1% 51 51 Z_OUT 50 50 GMA1 49 GMA3 48 GMA4 47 GMA5 46 GMA7 45 GMA9 49 43 CLK6 42 VGH_R 41 VGH_F 40 VGH_ODD GMA18 Vcore 38 37 VGH_EVEN CLK3_I CLK2_I 38 VGL_I 35 34 CLK5 R7711 0 VST 36 GIP_RST 35 VCOMRFB 34 VCOM CLK4 R7712 CLK3 R7714 0 0 CLK1_I 37 EPI_LOCK3 36 0 CLK4_I 39 CLK6 R7707 CLK5_I CLK2 R7715 CLK1 0 VDD CLK1_I 39 R7702 0 CLK6_I CLK2_I 40 H_VDD 33 RE 30 29 VST 12 0 RESET 13 1/16W DISCHG GIP_RST 21 20 TXA1N 19 19 47 GST GST_SOC DISCHG FROM SOC C7718 15pF 50V 17 VCOM VGL R7716 0 1/16W OPT VGL 29 27 GCLK 26 MCLK 25 GST 24 EO 23 VSENSE 22 GND 15 GIP_RST 14 VST 13 VGL_I 12 VGH_EVEN 11 VGH_ODD 15 EPI_LOCK3 14 EPI_LOCK6_SOURCE 0 VGL_I 1/16W R7741 0 DISCHG VCC 1/16W OPT MCLK VDD GST R7735 100 1/16W EO R7742 3K RE OPT 1/16W R7736 3K 1/16W VDD PANEL_VCC R7738 0 1/16W R7721 0 1/16W +3.3V_NORMAL REVERSE GCLK 16 VCOMLFB VGL R7740 R7749 1K 1/16W OPT 1 2 3 4 5 6 14 1/16W FROM SOC Vcore 18 18 R7704 TXA1P 20 15 VDD 21 EPI BI-SCAN 21 R7719 20 VGH_EVEN VST TPS65198 IC7701 POS TXACLKN 22 11 28 AVDD 23 H_VDD EVEN 19 FROM SOC 10 NEG CH4 TXB0N 22 9 ODD 18 TXB0P 23 VGH_ODD VGL 24 24 TXACLKP VGH_F VGH_F C7717 15pF 50V 25 8 OUT 1/16W FROM SOC 26 25 VGH_R VGH_R VGH2 FROM SOC 26 EO 17 TXA4N 27 47 16 R7703 EO_SOC THERMAL TXB1N CH5 7 TXA4P 28 TXB1P R7748 1K 1/16W REVERSE [EP]VGL VGH1 29 VGL CLK1 FROM SOC 30 CLK2 RE 31 CLK3 TXB2N CH6 CLK4 31 VCC 32 CLK5 32 TXB2P CLK6 33 C7750 1uF 25V OPT R7747 0 1/16W OPT C7726 1uF 25V R7743 OPT 0 1/16W R7751 15K 1/16W R7753 15K 1/16W OPT R7752 15K 1/16W R7754 15K 1/16W OPT 13 GMA18 11 GMA16 VGH_F 9 VGH_R 8 CLK6 7 CLK5 6 CLK4 GMA12 7 6 GMA9 CLK3 4 CLK2 3 CLK1 2 R7756 10K VCC18 GMA14 GMA10 R7761 10K OPT GMA7 GMA5 3 GMA4 2 GMA3 1 GMA1 MCLK FROM SOC C7719 15pF 50V EPI_LOCK6 C R7757 4 47 1/16W GMA15 8 5 5 R7705 MCLK_SOC R7758 10K R7755 EPI_LOCK6_SOURCE B VCOM_P C7741 10uF 16V C7743 1uF 25V VCOM_N VCOM_LOOP R7731 0 1/16W VCOM 12 10 9 1 CLK5 CLK4_I GMA15 GMA16 10 44 CLK3_I 41 16 CLK4 CLK5_I GMA14 17 CLK3 45 CLK6_I GMA12 42 46 GMA10 43 27 CLK2 47 44 28 CLK1 48 MMBT3904(NXP) Q7703 10K VDD E R7706 C B 100 E 0 1/16W OPT C7749 1uF 50V OPT 40V R7734 47 GCLK GCLK_SOC Q7702 MMBT3904(NXP) D7702 1/16W FROM SOC C7720 15pF 50V R7723 R7724 0 0 1/16W 1/16W OPT C7744 1uF 50V R7726 0 1/16W OPT R7732 0 1/16W OPT R7733 0 1/16W Z_OUT VGH VGH FL8S050HA1 FL8S050HA1 P7703 P7702 DEV_50WAFER DEV_50WAFER THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 2011.12.01 T-Con 77 LGE Internal Use Only eMMC I/F EMMC_VCCQ 10K 10K 10K 10K R8104 R8105 R8106 R8107 EMMC_DATA[0] A3 EMMC_DATA[1] A4 EMMC_DATA[2] A5 EMMC_DATA[3] EMMC_DATA[4] B2 EMMC_DATA[5] B4 B3 EMMC_DATA[6] EMMC_DATA[7] B5 AR8101 22 1/16W B6 DAT0 NC_25 DAT1 NC_26 DAT2 NC_27 DAT3 NC_28 DAT4 NC_29 DAT5 NC_30 DAT6 NC_31 DAT7 NC_32 NC_33 NC_34 M6 M5 CLK NC_35 CMD NC_36 NC_37 NC_38 A6 C5 E5 E8 AR8102 E9 22 E10 EMMC_CMD F10 EMMC_RST G3 G10 H5 OPT J5 C8107 10pF 50V K6 K7 K10 P7 P10 NC_3 NC_39 NC_4 NC_40 NC_23 NC_41 NC_42 NC_46 NC_43 NC_47 NC_44 NC_48 NC_45 NC_49 NC_52 NC_50 NC_58 NC_51 NC_59 NC_53 NC_66 NC_54 NC_73 NC_55 NC_80 NC_56 NC_81 NC_57 NC_82 NC_60 NC_116 NC_119 K5 RESET OPT C8100 0.1uF 16V C6 M4 3.3V_EMMC EMMC_VCCQ N4 P3 EMMC_RESET_BALL EMMC_CMD_BALL EMMC_CLK_BALL DAT6 DAT5 DAT4 DAT3 P5 VCCQ_1 VCCQ_2 VCCQ_3 VCCQ_4 VCCQ_5 C8105 0.1uF 16V C8106 2.2uF 10V E6 F5 J10 K9 VCC_1 VCC_2 VCC_3 VCC_4 EMMC_VDDI C2 VDDI C8104 0.1uF 16V E7 G5 H10 K8 C8102 0.1uF 16V C8103 2.2uF 10V C4 N2 N5 P4 P6 VSS_1 VSS_2 VSS_3 VSS_4 GED_SANDISK_EMMC_4GB A7 EMMC_CLK IC8100-*3 H26M31001EFR IC8100-*1 H26M21001ECR NC_61 NC_62 NC_63 NC_64 NC_65 NC_67 NC_68 NC_69 NC_70 NC_71 NC_72 NC_74 NC_75 NC_76 NC_77 NC_78 NC_79 NC_83 NC_84 NC_85 NC_86 NC_87 NC_88 NC_89 NC_90 NC_91 NC_92 VSSQ_1 NC_93 VSSQ_2 NC_94 VSSQ_3 NC_95 VSSQ_4 NC_96 VSSQ_5 NC_97 NC_98 NC_99 DAT3 DAT4 A2 A8 A9 A10 A11 A12 A13 A14 B1 B7 B8 B9 B10 B11 B12 Don’t Connect Power At VDDI B13 EMMC_VDDI B14 C1 (Just Interal LDO Capacitor) DAT5 NC_100 A1 C3 C7 NC_1 NC_101 NC_2 NC_102 NC_5 NC_103 NC_6 NC_104 NC_7 NC_105 NC_8 NC_106 NC_9 NC_107 NC_10 NC_108 NC_11 NC_109 NC_12 NC_110 NC_13 NC_111 NC_14 NC_112 NC_15 NC_113 NC_16 NC_114 NC_17 NC_115 NC_18 NC_117 NC_19 NC_118 NC_20 NC_120 NC_21 NC_121 NC_22 NC_122 NC_24 NC_123 DU1 DU2 DU3 DU4 DU5 DU6 DU7 DU8 THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes DUMMY_1 DUMMY_9 DUMMY_2 DUMMY_10 DUMMY_3 DUMMY_11 DUMMY_4 DUMMY_12 DUMMY_5 DUMMY_13 DUMMY_6 DUMMY_14 DUMMY_7 DUMMY_15 DUMMY_8 DUMMY_16 C8 A3 C9 A4 C10 A5 C11 B2 C12 B3 C13 B4 B5 C14 D1 D2 DAT5 B6 C8 DAT0 NC_25 DAT1 NC_26 DAT2 NC_27 DAT3 NC_28 DAT4 NC_29 DAT5 NC_30 DAT6 NC_31 DAT7 NC_32 NC_33 D3 D4 M6 D12 M5 D13 NC_34 CLK NC_35 CMD NC_36 NC_37 D14 E1 E2 A7 E3 C5 E12 E5 E13 E8 E14 E9 F1 F2 NC_38 A6 DAT6 E10 F10 G3 F3 F12 G10 F13 H5 F14 J5 G1 K6 G2 K7 G12 K10 G13 P7 G14 P10 H1 NC_3 NC_39 NC_4 NC_40 NC_23 NC_41 NC_42 NC_46 NC_43 NC_47 NC_44 NC_48 NC_45 NC_49 NC_52 NC_50 NC_58 NC_51 NC_59 NC_53 NC_66 NC_54 NC_73 NC_55 NC_80 NC_56 NC_81 NC_57 NC_82 NC_60 NC_116 NC_61 NC_119 NC_62 H2 K5 H3 RESET H12 H13 H14 C6 J1 M4 J2 N4 J3 P3 J12 P5 VCCQ_1 VCCQ_2 VCCQ_3 VCCQ_4 VCCQ_5 J13 J14 K1 K2 EMMC_RESET_BALL E6 F5 J10 K3 K9 K12 VCC_1 VCC_2 VCC_3 VCC_4 K13 K14 C2 L1 VDDI L2 L3 L12 E7 L13 G5 L14 H10 M1 K8 M2 C4 M3 N2 M7 N5 M8 P4 P6 M9 VSS_1 VSS_2 VSS_3 VSS_4 VSSQ_1 VSSQ_2 VSSQ_3 VSSQ_4 VSSQ_5 M10 NC_65 NC_67 NC_68 NC_69 NC_70 NC_71 NC_72 NC_74 NC_75 NC_76 NC_77 NC_78 NC_79 NC_83 NC_84 NC_85 NC_86 NC_87 NC_88 NC_89 NC_90 NC_91 NC_92 NC_93 NC_94 NC_95 NC_96 NC_97 NC_99 M12 M13 A1 M14 A2 N1 A8 N3 A9 N6 A10 EMMC_CMD_BALL N7 A11 N8 A12 N9 A13 N10 A14 N11 B1 N12 B7 N13 B8 N14 B9 P1 B10 P2 B11 EMMC_CLK_BALL B12 P9 B13 P11 B14 P12 C1 P13 C3 P14 C7 DU9 DU1 DU10 DU2 DU11 DU3 DU12 DU4 DU13 DU5 DU14 DU6 DU15 DU7 DU16 NC_64 NC_98 M11 P8 NC_63 DU8 NC_100 NC_1 NC_101 NC_2 NC_102 NC_5 NC_103 NC_6 NC_104 NC_7 NC_105 NC_8 NC_106 NC_9 NC_107 NC_10 NC_108 NC_11 NC_109 NC_12 NC_110 NC_13 NC_111 NC_14 NC_112 NC_15 NC_113 NC_16 NC_114 NC_17 NC_115 NC_18 NC_117 NC_19 NC_118 NC_20 NC_120 NC_21 NC_121 NC_22 NC_122 NC_24 NC_123 C9 C10 C11 C12 C13 C14 D1 D2 A3 A4 A5 B2 B3 B4 B5 B6 DAT0 NC_25 DAT1 NC_26 DAT2 NC_27 DAT3 NC_28 DAT4 NC_29 DAT5 NC_30 DAT6 NC_31 DAT7 NC_32 D3 NC_33 D4 NC_34 D12 D13 M6 M5 CLK NC_35 CMD NC_36 D14 E1 E2 E3 E12 E13 E14 F1 F2 F3 F12 F13 F14 G1 G2 G12 G13 G14 H1 NC_37 NC_38 A6 A7 C5 E5 E8 E9 E10 F10 G3 G10 H5 J5 K6 K7 K10 P7 P10 NC_3 NC_39 NC_4 NC_40 NC_23 NC_41 NC_42 NC_46 NC_43 NC_47 NC_44 NC_48 NC_45 NC_49 NC_52 NC_50 NC_58 NC_51 NC_59 NC_53 NC_66 NC_54 NC_73 NC_55 NC_80 NC_56 NC_81 NC_57 NC_82 NC_60 NC_116 NC_61 NC_119 NC_62 H2 H3 H12 K5 RESET H13 H14 J1 J2 J3 J12 J13 C6 M4 N4 P3 P5 VCCQ_1 VCCQ_2 VCCQ_3 VCCQ_4 VCCQ_5 J14 K1 K2 K3 K12 K13 E6 F5 J10 K9 VCC_1 VCC_2 VCC_3 VCC_4 K14 L1 L2 C2 VDDI L3 L12 L13 L14 M1 M2 M3 M7 M8 M9 M10 E7 G5 H10 K8 C4 N2 N5 P4 P6 VSS_1 VSS_2 VSS_3 VSS_4 NC_63 NC_64 NC_65 NC_67 NC_68 NC_69 NC_70 NC_71 NC_72 NC_74 NC_75 NC_76 NC_77 NC_78 NC_79 NC_83 NC_84 NC_85 NC_86 NC_87 NC_88 NC_89 NC_90 NC_91 NC_92 VSSQ_1 NC_93 VSSQ_2 NC_94 VSSQ_3 NC_95 VSSQ_4 NC_96 VSSQ_5 NC_97 M11 NC_98 M12 NC_99 M13 NC_100 M14 N1 N3 N6 N7 N8 N9 N10 N11 N12 N13 N14 P1 P2 P8 P9 P11 P12 P13 P14 A1 A2 A8 A9 A10 A11 A12 A13 A14 B1 B7 B8 B9 B10 B11 B12 B13 B14 C1 C3 C7 NC_1 NC_101 NC_2 NC_102 NC_5 NC_103 NC_6 NC_104 NC_7 NC_105 NC_8 NC_106 NC_9 NC_107 NC_10 NC_108 NC_11 NC_109 NC_12 NC_110 NC_13 NC_111 NC_14 NC_112 NC_15 NC_113 NC_16 NC_114 NC_17 NC_115 NC_18 NC_117 NC_19 NC_118 NC_20 NC_120 NC_21 NC_121 NC_22 NC_122 NC_24 NC_123 IC8100-*2 KLM2G1HE3F-B001 C8 A3 C9 A4 C10 A5 C11 B2 C12 B3 C13 B4 C14 B5 D1 B6 D2 C8 DAT0 NC_25 DAT1 NC_26 DAT2 NC_27 DAT3 NC_28 DAT4 NC_29 DAT5 NC_30 DAT6 NC_31 DAT7 NC_32 NC_33 D3 NC_34 M6 D4 M5 D12 D13 CLK NC_35 CMD NC_36 NC_37 D14 E1 A6 E2 A7 E3 C5 E12 E5 E8 E13 E9 E14 E10 F1 F2 F10 F3 G3 G10 F12 F13 H5 F14 J5 K6 G1 K7 G2 K10 G12 G13 P7 G14 P10 H1 NC_38 NC_3 NC_39 NC_4 NC_40 NC_23 NC_41 NC_42 NC_46 NC_43 NC_47 NC_44 NC_48 NC_45 NC_49 NC_52 NC_50 NC_58 NC_51 NC_59 NC_53 NC_66 NC_54 NC_73 NC_55 NC_80 NC_56 NC_81 NC_57 NC_82 NC_60 NC_116 NC_61 NC_119 NC_62 NC_63 H2 NC_64 K5 H3 RSTN H12 H13 C6 H14 M4 J1 J2 N4 J3 P3 P5 J12 VDD_1 VDD_2 VDD_3 VDD_4 VDD_5 J13 J14 K1 E6 K2 F5 J10 K3 K9 K12 VDDF_1 VDDF_2 VDDF_3 VDDF_4 K13 K14 C2 L1 VDDI L2 L3 C4 L12 E7 L13 G5 L14 H10 M1 K8 M2 M3 N2 M7 N5 M8 P4 M9 P6 M10 VSS_1 VSS_2 VSS_3 SAMSUNG_EMMC_2GB 10K R8103 IC8100 SDIN5D2-4G-974L1 AR8100 22 1/16W HYNIX_EMMC_2GB 10K R8102 R8116 10K 10K R8101 R8117 10K 10K R8100 47K 47K 47K 47K R8107-*1 R8106-*1 R8105-*1 EMMC DATA LINE 10K PULL/UP DEV_GED_HYNIX_EMMC_4GB EMMC_DATA[0-7] R8104-*1 47K 47K 47K R8103-*1 R8102-*1 R8101-*1 R8100-*1 47K EMMC DATA LINE 47K PULL/UP NC_65 NC_67 NC_68 NC_69 NC_70 NC_71 NC_72 NC_74 NC_75 NC_76 NC_77 NC_78 NC_79 NC_83 NC_84 NC_85 NC_86 NC_87 NC_88 NC_89 NC_90 NC_91 VSS_4 NC_92 VSS_5 NC_93 VSS_6 NC_94 VSS_7 NC_95 VSS_8 NC_96 VSS_9 NC_97 NC_98 M11 NC_99 M12 NC_100 A1 M13 M14 A2 N1 A8 N3 A9 N6 A10 N7 A11 N8 A12 N9 A13 A14 N10 N11 B1 N12 B7 N13 B8 N14 B9 B10 P1 P2 B11 P8 B12 P9 B13 P11 B14 P12 C1 C3 P13 C7 P14 NC_1 NC_101 NC_2 NC_102 NC_5 NC_103 NC_6 NC_104 NC_7 NC_105 NC_8 NC_106 NC_9 NC_107 NC_10 NC_108 NC_11 NC_109 NC_12 NC_110 NC_13 NC_111 NC_14 NC_112 NC_15 NC_113 NC_16 NC_114 NC_17 NC_115 NC_18 NC_117 NC_19 NC_118 NC_20 NC_120 NC_21 NC_121 NC_22 NC_122 NC_24 NC_123 C9 C10 C11 C12 C13 C14 D1 D2 D3 D4 D12 D13 D14 E1 E2 E3 E12 E13 E14 F1 F2 F3 F12 F13 F14 G1 G2 G12 G13 G14 H1 H2 H3 H12 H13 H14 J1 J2 J3 J12 J13 J14 K1 K2 K3 K12 K13 K14 L1 L2 L3 L12 L13 L14 M1 M2 M3 M7 M8 M9 M10 M11 M12 M13 M14 N1 N3 N6 N7 N8 N9 N10 N11 N12 N13 N14 P1 P2 P8 P9 P11 P12 P13 P14 DU9 DUMMY_1 DUMMY_9 DUMMY_2 DUMMY_10 DUMMY_3 DUMMY_11 DUMMY_4 DUMMY_12 DUMMY_5 DUMMY_13 DUMMY_6 DUMMY_14 DUMMY_7 DUMMY_15 DUMMY_8 DUMMY_16 DU10 DU11 DU12 DU13 DU14 DU15 DU16 eMMC 11.09.29 81 LGE Internal Use Only BLM18PG121SN1D L8900 LOGO_LIGHT +3.5V_ST Place Near Micom +3.5V_ST P8900 12507WR-03L 1 LOGO_LIGHT 2 10K R8902 OPT R8900 22 LOGO_LIGHT LOGO_LIGHT B 3 4 C LOGO_LIGHT LOGO_LIGHT R8901 10K LOGO_LIGHT C8900 0.1uF 16V Q8900 1K R8903 E LOGO_LIGHT MMBT3904(NXP) THE SYMBOL MARK OF THIS SCHEMETIC DIAGRAM INCORPORATES SPECIAL FEATURES IMPORTANT FOR PROTECTION FROM X-RADIATION. FILRE AND ELECTRICAL SHOCK HAZARDS, WHEN SERVICING IF IS ESSENTIAL THAT ONLY MANUFATURES SPECFIED PARTS BE USED FOR THE CRITICAL COMPONENTS IN THE SYMBOL MARK OF THE SCHEMETIC. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LGE Internal Use Only R7755 R7758 R7756 R7757 Q7701 C7746 C7748 C7745 C7747 R7722 R7717 C7738 C2438 C7723 C7724 C7734 R2424 R2405 L2410 R2409 R2410 C2442 C2444 R2417 R2413 IC2402 IC2401 C2406 R2416 P2401 P2400 R2412 R2411 C2410 M102 R159 C2413 C718 C758 C713 C714 R707 R706 R2435 C24001 C2428 C2417 IC2404 L2407 L7001 C2415 L2409 C8103 C8102 C4325 L4306 C4341 C4300 L4307 C4323 D4303 C4322 C4301 12 IC4306 M505 C7007 C7006 C4337 6 D4300 M504 18 C4310 C4340 C4342 R4304 R4303 R4302 R4301 D4302 R4323 R4341 C2421 L2411 C755 C756 R710 A B C D E F G H J K L M N P R T IC8100 C4333 P7000 C4331 24 IC4303 R4300 D4304 R4338 R4343 C4332 R4336 C7716 C2423 C2422 10 1 C2419 C720 A B C D E F G H J K L M N P R T 1 2 3 L500 C500 C526 C522 L506 C512 L504 R308 C311 R309 C4328 R4329 C4327 R4328 R3300 L4305 D 7 0 0 0D 7 0 0 1 JK4300 JK7000 JK4302 JK3300 JK4303 R3305 R306 R7710 R7709 R7708 C7706 C7709 L7701 D7700 L2406 C728 R716 C736 R721 R720 C735 1 2 3 IC701 C365 C380 L501 C117 C540 C2430 1 10 19 R3320 R3319 R3301 JK3303 1 19 JK3302 1 10 D 3 3 0 2 R3336 R3330 R305 Q3303 R304 R3318 R3316 R3313 R3331 R3317 D3301 10 19 JK3301 1 C7756 R7739 R7729 C7727 Q7700 D7703 D7705 D7704 D7706 C7700 C7701 R7104 L7702 C7721 C707 C750 C708 C701 7 8 9 C753 IC703 C754 R714 R712 R106 R107 R101 R102 C104 R189 R190 C726 R733 L700 R732 C749 C748 C747 R731 R730 C746 R186 R187 R108 R109 R175 R184 C364 C510 C118 C328 C307 C302 C304 C308 R376 C116 R378 R188 R117 R185 R116 C355 R342 C362 C305 C347 C544 R500 C8105 C8107 R8117 R8116 C8100 R8107 R8106 C8104 R8105 R8104 R8100 R8101 R8102 R8103 C501 R379 R370 R303 R302 5 C717 C520 C508 C382 C354 C351 C323 C350 C303 C306 C502 C316 L502 R119 R352 R162 R193 R377 R351 R369 C358 C363 R6105 Q6100 C6109 C6108 16 C6103 C6100 R7700 C7704 C7711 C7710 C7707 C7728 C7712 C7703 C7702 C711 R704 R705 C712 C740 R725 C721 R724 C739 C723 C752 C553 C548 C361 C312 C107 C108 L6503 C6526 C6529 C6524 C6527 C6542 C6538 L6506 C6531 L6501 C6519 7 8 9 C2443 R7734 C2432 R2441 C2433 R2442 C2435 R142 R343 R126 R171 R161 R120 R168 R170 R127 R125 R133 R132 R138 R135 R357 C310 4 1 C6540 C6535 IC6501 C6507 C6510 C6513 C6516 C6523 C6509 C6525 R332 R7108 R7107 R7101 R7102 R7106 C7726 C2400 C 2 4 0 2L 2 4 0 8 C524 C532 C529 R349 R350 1 P3800 4 C6521 R6512 C6518 C6517 C6515 C6512 C6544 R6525 L6507 C341 R6506 R346 R331 R6531 C6548 C6534 C6532 R6532 D3303 C4334 R4339 C4338 R2408 R2401 R7721 R7738 Q2406 R2402 C2405 C2404 R2403 R2400 R115 R114 R315 IC3800 8 R155 Q3000 D3000 R3029 Q3001 C8900 R354 C391 C379 R353 C392 C378 Q6500 C6536 C6539 R2451 R2452 C4320 C4321 C4339 R4111 R4109 R4115 Q4104 R4107 R4101 C4319 R2406 R2404 C2441 C2403 IC2400 C7004 L7000 C7003 9 16 1 C3801 R3037 R3036 24 13 R3019 R3018 R173 R3033 L4302 R4113 R4123 D4105 R4117 R4118 R4114 R4124 Q4101 R4104 Q4100 C5423 R5406 24 C5417 13 C5410 R5401 C5404 C5408 C5406 R5402 R5403 C5413 C5402 R5404 R3834 Q4102 R4102 R4103 C5431 L5403 L5405 C5425 C5426 C5420 C5416 C5418 L5401 C5414 C314 C315 1 R143 12 C 3 0 0 1R 3 0 2 3 C3000 R355 C394 C384 R3001 R3003 R3032 R330 C348 C340 C343 C5432 C5434 L5404 C5430 D3611 D3612 R300 R301 C300 C301 R149 R145 C3003 C3002 X3000 C342 D3801 R328 C338 D3800 R3810 C344 C388 R3811 R3814 R8900 R8903 L4800 C5429 C5422 D3623 R3646 D 3 6 0 1D 3 6 0 0 L304 D302 C330 D301 R320 R323 R322 C333 D300 C334 R326 D3615 D3616 C329 R321 R324 C335 R325 JK3603 R3601 R3600 L300 IC100 R192 R191 R181 R104 C101 D3620 R103 R105 10 8 R3700 R3311 5 1 R137 R136 IC104 1 C386 12 D3802 R329 C339 36 C385 25 19 4 8 C3615 D3613 R6509 R6510 R6508 C6520 R3620 C6508 R3615 C6506 C7005 C8106 1 5 1 VA3700 AR8100 AR8101 4 R3323 R3325 C3300 R3321 R3306 R3304 R7606 R7607 AR8102 1 D3622 D3621 R3643 R3644 R3645 4 C6503 R6500 AR7600 4 R3303 R3302 L2403 P7600 R7600 R7601 1 IC3300 Q2401 4 D3300 8 R3329 R3328 Q3300 L2402 12 R3315 R3314 R3337 R3339 C3302 R2425 R2420 R2423 R174 R4327 6 R3324 R3326 C3301 5 14 R2415 C2416 R2439 R4332 R4342 4 L2401 R2426 C704 C2429 10 M503 R3327 C2401 1 Q3302 R2422 R2419 R2421 R2418 1 M506 R2428 R2427 C2445 C2411 M104 C4336 8 1 C715 R708 R709 C716 C702 C105 C106 C102 C100 C503 C6546 1 C2434 C700 IC501 R6102 R6100 R6103 R6101 IC4305 R4330 C4329 7 JH R2414 C2437 R2407 C2439 C504 L4308 C4326 C4324 R7725 IC2405 L2405 8 C6106 94V-0 R307 R3312 R3310 10 IC6100 L7704 1 1 JH C734 C722 R719 C724 R718 C733 1 R3308 R6106 R6107 R6104 C6104 C7735 C7715 8 C6107 C2448 5 R6513 R2432 R2431 R2434 C2426 R2433 C2431 1 3 5 7 9 11 13 2 4 6 8 10 12 14 C6105 5 R3309 C390C395 C7722 IC2403 C2418 C706 C7730 C7740 C7736 D7701 1 L6100 R6503 R6504 M103 C727 A B C D E F G H J K L M N P IC6503 C399 Pb Free Soldering BAR CODE 8 5 R6527 R6528 R6529 C397 C400 X100 L2413 1 C309 C398 R129 R130 R6521 R6520 Q3301 Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes AR6501 R6526 IC6500 C115 C2427 R2430 C2420 4 R6523 L2412 C6533 4 Q6501 C331 L302 C332 L303 R3338 R3307 R3340 C3303 AR6502 7 8 9 C113 C2436 L6502 R6511 JK3700 C6528 AR6500 C525 C377 C383 P3801 P3000 L 6 5 0 0C 6 5 5 1 C6550 R6519 C6500 C6505 C6511 C6514 C6530 R6516 R6518 JK3602 C359 C352 R340 R339 ZD307 C6522 R6515 L6508 R334 2 4 C 7 7 3 1C 7 7 3 2 R7713 C7725 R702 C709 C7737 TH7700 C7729 C710 R703 C103 R335 M101 D3803 R3806 1 2 3 36 ZD306 7 8 9 C337 C336 R176 C374 C371 C372 C373 C360 C514 1 12 C703 1 2 3 R147 R148 R153 R154 R157 R178 R150 R151 C6549 C6501 R359 R356 C375 R364 R361 R362 R363 R341 R7728 IC7700 3 6R 7 7 2 0 C7742 C7713 16 25 ZD305 R372 A B C D E F G H J K L M N P R T R311 R310 R 1 7 2R 3 3 7 R338 GP4 LT22* / LJ22* LA22* / LB22* EAX64434205-1.0 111123 R3020 R3021 R8902 R8901 R3016 R3017 A B C D E F G H J K L M N P R T R156 R118 48 R7727 R7718 C7739 5 R3014 C368 C370 C367 C369 C366 ZD303 R373 ZD304 TU6504 TU6503 TU6502 TU6501 TU6500 R3011 R163 R358 C7705 C7708 R7759 R7760 R7737 R7730 L7703 C757 R158 C7754 C7714 R713 C523 C7755 15 ZD302 12 C7757 23 R374 1 R711 C527 R165 R167 R123 R122 R110 R111 R121 1 R3000 R3035 R3002 ZD301 C552 R100 R124 C114 1 48 C346 C505 10 R333 ZD300 JK3801 R3022 R3034 C2412 R3028 C506 R113 R112 10 R345 37 C345 R344 R3006 R3005 C539 20 8 5 JK3800 IC3000 R139 R134 R3030 R3031 IC105 C543 C546 C535 C550 R166 R169 R177 R164 R128 R131 R160 20 SW3000 R366 R367 R371 R368 C120 30 1 4 R3008 R3010 R3013 R3007 R3009 R3012 R3026 R3027 C3004 R3025 R3024 R140 R141 C387 30 8 5 R146 40 41 AR100 M502 L2404 R715 C389 C396 C393 40 R152 R144 C737 R722 R723 C738 R717 C743 R728 R729 C744 C741 R726 R727 C742 C725 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 IC3600 50 1 4 P100 1 C319 IC702 IC704 Q7703 C7733 L7700 L7705 R7701 C2425 C2424 C2446 C2447 C705 C719 JK3803 BAR CODE R314 C751 C2409 M100 C3800 C3802 C3803 REVERSE C745 C2414 C320 P7101 A B C D E F G H J K L M N P R T U V W Y AA AB AC AD AE AF AG AH AJ AK AL AM AN AP AR AT AU R336 P7100 C7744 R7731 R7726 R 7 7 2 3R 7 7 3 2 R 7 7 2 4R 7 7 3 3 C7749 L2400 C7001 C7002 10 6 1 10 5 8 1 R7105 C2407 5 R7006 IC7000 R3820 R3821 D 3 8 0 4D 3 8 0 5 C7718 R7704 R7703 C7717 C7101 C7102 L7100 C2408 R3647 M501 Q2407 20 R5400 R7005 R7004 C7000 R7000 R7001 C5403 C5411 C5409 R4105 C5424 R5405 R7747 C2440 R7100 R7103 C7100 D7702 R2437 10 12 50 R7736 C7750 R7735 30 C5421 C5419 Q5400 Q7001 C5400 L5400 C7741 R4108 1 1 C5412 C5407 C5405 R3602 C3634 R3642 R3641 C3633 JK3601 48 IC5400 R5410 R5411 D5403 37 C5415 L301 C5401 4 R5407 R5414 D5400 C5427 C5428 C5433 R5409 R5413 D5402 40 R5408 R5412 D5401 51 C5001 C5000 R7719 R7741 C7743 R7750 R7744 R7746 R7745 21 D5003 D5002 R4100 P7703 28 R5418 C5439 14 D5001 D5000 M500 C5435 L5402 P7702 1 R5417 C5438 R5416 C5437 20 1 Q7702 R7761 4 R7749 R7748 C7720 R7706 IC7701 R7705 C7719 R7740 R7716 1 7 R5415 C5436 C5002 C5003 4 10 R4125 30 Q8900 1 D4106 3 RR+ LL+ AR4800 1 L8900 40 8 50 1 C4800 5 JK5000 R7753 R7754 R7751 R7752 R7702 R7707 R7711 R7712 R7714 R7715 1 P4301 2 D4101 D4100 C4104 D4104 C4107 C4100 C4102 L4100 R4119 P5400 R7742 R7743 P4102 SPK P8900 P4800 LGE Internal Use Only 2012 LED/LCD TV Engineering guide < Applicable Model > XXLS5700-UA Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 1 / 153 LGE Internal Use Only ◈ CONTENT ◈ 1. ‘2012 Product line-up and features 2. Model naming and tool option 3. New features 4. Main PCBs 5. Block Diagrams, IIC Map 6. Structure of TV set and connection of sub ass’ys 7. New sub ass’ys - Instruction of new sub ass’ys - How to use tool - Download 8. Adjust way of new features (widevine…) 9. Repair guide 10. The latest issue and concerning issue Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 2 / 153 LGE Internal Use Only ◈ CONTENT ◈ 1. ‘2012 Product line-up and features 2. Model naming and tool option 3. New features 4. Main PCBs 5. Block Diagrams, IIC Map 6. Structure of TV set and connection of sub ass’ys 7. New sub ass’ys - Instruction of new sub ass’ys - How to use tool - Download 8. Adjust way of new features 9. Repair guide 10. The latest issue and concerning issue Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 3 / 153 LGE Internal Use Only USA DTV ’10 High end R LX9500 LE8500 R ’11 LW9800 55F/47F(5.2W) Full LED Slim + 480Hz, 3D(SG),THX, Magic UI, Broadband 55F (8.3W/TBD) NANO Full LED+480Hz, Cinema 3D, THX(TBD), Smart TV, M3, WiFi B/in LV9500 55F (8.4W) (*SG재고소진) NANO Full LED+480Hz, Smart TV 55F/47F (2.4W : 47” CSKD Air, 55” SET Air) Full LED Slim + 240Hz,THX, Broadband 65F*/55F/47F (4.29*/3.25) LED Plus+240Hz (65”: LED+120Hz), Cinema 3D, Smart TV, M3, WiFi in-boxing 55F/47F (3.29) ClubLW5700 LED +120Hz, Cinema 3D, Smart TV, M3(옵션), WiFi in-boxing 55F/47F (2.15) 47F/42F (4.2W) + 55F (6.1W) LW5600 LED Plus+120Hz, Cinema 3D, Smart TV, M3, LE7300 LED + 120Hz WiFi in-boxing 55F/47F/42F* (6.4W/8.4W*) Club MM LW5300 LED Plus+120Hz, Cinema 3D, 3D Blu-ray in-boxing MM 55F/47F/42F (7.1W) LW5000 55F/47F/42F (5.1W) LED Plus+120Hz, Cinema 3D LX6500 LED Plus + 240Hz, 3D(SG), Local Dimming, R 55F/47F/42F (2.15) Broadband (LE5500 Tool) LV5500 LED+120Hz, Smart TV, M3, WiFi in-boxing RLE5500 55F/47F/42F (2.3W) LED Plus + 120Hz, Local Dimming, Broadband ClubLV5400 55F/47F/42F (3.8) LED+120Hz, Smart TV, M3(옵션), WiFi in-boxing (2.4W) + 32F (4.1W) LE5400 55F/47F/42F LV5300 55F (7.1W) LED + 120Hz, Broadband LED+120Hz (*Rental재고소진) R MM LV4400 55F/47F/42F (9.3W) LED+120Hz LV3700 ClubLE5350 R 42F(8.2W) 55F*/47F/42F (2.7*/2.15) LED+FHD, Smart TV, M3(옵션), WiFi in-boxing LED + 120Hz, Broadband, Only LV3500 42F/37F (2.15) 37F/32F(4.1W) + 26/22/(2.2W) + 19(4.4W) LV2500 32/26/22*(2.7/4.17*) LE5300 LED + 120Hz(26/22/19: LED HD) LV3400 Low end 60F(4.1W) + 52F(3.2W) + 46F/42F/32F(2.4W) LD550 120Hz, Broadband R (3.1W) + 32F (3.4W) LD520 55F/47F/42F 120Hz (LH50 Tool) MM LD500 47F(10.1W) 120Hz (ODM) 47F/42F/37F/32F (2.2W) LD450 FHD MM LD400 42F/32F 32/26/22/19 (2.1W) (10.3W/1W) LD350 HD FHD (ODM)MM Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes LK550 LK520 LK450 LK330 LED+FHD 55F/47F/42F (2.22) LED, T120Hz, 3D, Smart + 3 Mode (5.14W) LM6400 55F/47F LED, T120Hz, 3D, Smart + 3 Mode (8.27W) LM6450 60F LED, T120Hz, 3D, +Smart + 3 Mod LM6700 55F/47F (2.29) LMG620 LED, T120Hz, 3D, Smart (Google) + Qwerty 4 LM6200 /50 32 (9.3W) LED+HD 55F/47F/42F(2.15) CCFL+120Hz (LD650 Tool) 42F/37F/32F (2.7) CCFL+FHD 32(3.7) CCFL+HD (LD350 Tool) Mode 65F*/55F/47F/42F/32F** (2.29/2.22/2.16) 55F/47F (4.2W) LED, T120Hz, 3D, Smart + 3 Mode / 3D BDP in-packing LS5700/50 60F*/55F/47F/42F/32F**(4.2W TBD*/2.22/3.7**) / 60F*/55F/47F/42F** (4.4W TBD*/2.29/3.14**) LED, T120Hz, Smart + 3 Mode LM5800/50 55F/47F/42F/32F (3.2W) / 55F/47F/42F (3.4W) LED, T120Hz, 3D, / 3D+Smart BDP in-packing 55F/47F/42F/37F/32F* (2.22/2.12*) LS5600/50 / 55F/47F/42F* (2.29/3.7*) LED, T120Hz (37/32” : 60Hz) LM4600 55F/47F (5.4W) LED, T120Hz, 3D (시야각 10도) LS4600 LED+HD 47F/42F (3.15) CCFL+120Hz, Smart TV, M3(옵션), WiFi in-boxing 4 / 153 Old Tool EM9600 55F (8/27W) OLED, 3D, Smart + 4 Mode 84(UD)*/60F*/55F/47F (9/24*/3.21) LM9600 ALEF + T480(*T240), 3D, Smart + 4 Mode LM9500 72F (5.28) IOL, T480Hz, 3D, Smart + 4Mode (3.21) LM8600 55F/47F LED, T240Hz, 3D, Smart + 4 Mode LMG860 55F/47F (5.16) LED, T240Hz, 3D, Smart (Google) + Qwerty 4 Mode LM7600 55F/47F (2.22) LED, T240Hz, 3D, Smart + 3 Mode LED+HD 32 (7.3W) LV2400 Club Borderless ’12 LW6500 Mid end Clear Screen 55F/47F (3.2W) LED, T120Hz LS4000 50F(7.3W) LED, T120Hz LS3500 32*/26/22 (2.23*/2.27) LED, HD LS3400 42F/32 (3.3W) LED, 60Hz (32”: HD) CCFL, 120Hz, LK450 CS570 47F/42F (3.2W) Tool CM565 47F/42F* (3.2W/4.1W*)CCFL, 60Hz, 3D, LK450 Tool / 42F (2.25) CS560/530 42F/37F/32F CCFL, 60Hz, LK450 Tool CS460 32*(2.25*) CCFL, HD LGE Internal Use Only Canada DTV ’10 Full LED Slim + 480Hz, 3D,THX, Magic UI, Broadband 55F/47F (9.2W) LW9800 Edge LED + 120Hz, Local Dimming, Broadband LW5700 47F/42F (4.4W) + 55F (6.3W) LE7300 Edge LED + 120Hz (5.2W) LX6500 55F/47F/42F LED Plus + 240Hz, 3D, Local Dimming, LW5600 LED Plus+240Hz, Cinema 3D, Smart TV, M3, WiFi in-boxing 55F/47F/42F (4.5) LED +120Hz, Cinema 3D, Smart TV, M3(옵션), WiFi in-boxing 55F/47F/42F (3.3) LED Plus+120Hz, Cinema 3D, Smart TV, M3, LW5300 55F/47F/42F (3.3W) Edge LED + 120Hz, Local Dimming, BB 55F/47F/42F (3.4W) LE5400 Edge LED + 120Hz, Broadband LE5300 55F/47/42F(5.3W)/32(5.1W)/26/22/(3.2W) Edge LED + 120Hz /19(5.2W) (26/22/19: Edge LED HD) LD650 55F/47F (4.3W) WiFi in-boxing MM Broadband(LE5500 Tool) Mid end NANO Full LED+480Hz, Cinema 3D, THX(TBD), Smart TV, M3, WiFi B/in LD520 Low end LM7600 55F/47F (3.7) LM6700 55F/47F (3.7) LED, T240Hz, 3D, Smart + 4 Mode LED, T240Hz, 3D, Smart + 3 Mode LED, T120Hz, 3D, Smart + 3 Mode (5.4W) LM6400 55F/47F LED, T120Hz, 3D, Smart + 3 Mode LM6450 60F (9.2W) LED, T120Hz, 3D+Smart LS5750 60F*/55F/47F/42F (4.4W TBD*/3.14) LM5800 55F/47F/42F (3.4W) LM5850 55F/47F (3.21일주차 RS 출하) LV5500 LV5400 55F/47F/42F (3.25) LED+120Hz, Smart TV, M3(옵션), WiFi inLED+120Hz LED, T120Hz, 3D, Smart + 3 Mode LED, T120Hz, 3D, Smart + 3 Mode, 3D BDP in-packing LED, T120Hz, Smart + 3 Mode LED, T120Hz, Smart + 3 Mode LED, T120Hz, 3D LED, T120Hz, 3D, 3D+Smart BDP in-packing (3.7/2.26*) LS5600 55F/47F/42F/37F/32F* LED, T120Hz (37/32” : 60Hz) (6.2W) LM4600 55F/47F LED, T120Hz, 3D 32/26/22*(3.3/4.25*) LV2500 LED+HD LED+HD 47F/42F (3.29) CCFL+120Hz, Smart TV, M3(옵션), WiFi in-boxing LS4600 47F/42F/37F/32F (3.1W) 47F(11.1W) LD500 120Hz (ODM) LD400 LK520 55F/47F/42F (3.15) LK450 47F*/42F/37F/32F (3.8*/3.3) CCFL+FHD LED, T120Hz LS3500 50F(8.1W) LED, T120Hz 32*/26/22 (3.8*/3.12) LED, HD 42F/32 (4.1W) LED, 60Hz (32”: HD) (3.4W) CS570 47F/42F CCFL, 120Hz, LK450 Tool CS560 42F/32F (3.10) CCFL, 60Hz, LK450 Tool 42F/32F(11.1W) FHD (ODM) CCFL+120Hz (LD650 Tool) 55F/47F (3.4W) LS4000 LS3400 120Hz (LH50 Tool) Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 55F/47F (4.1W) 55F/47F/42F/32F (3.7) 55F/47F/42F (4.1W) LD450 FHD 47F/42F/32F (4.4W) LD420 FHD (LH30 Tool) 32/26/22/19 (3.1W) LD350 HD 32 (4.4W) LD320 HD (LH20 Tool) LM8600 LS5700 55F/47F/42F (3.3) LED Plus+120Hz, Cinema 3D LED+120Hz, Smart TV, M3, WiFi in-boxing LK550 IOL, T480Hz, Cinema 3D, Smart + 4 Mode 55F/47F (4.3W) 47F*/42F/37F (3.3/ 3.14*) LV3500 LED+FHD 120Hz, Broadband 72F (6/11) LM6250 LV2400 32 (10.2W) LD550 ALEF + T480(*T240), Cinema 3D, Smart + 4 Mode LED Plus+120Hz, Cinema 3D, 3D Blu-ray in-boxing 240Hz, Broadband 60F(5.1W) + 52F/46F/42F (3.3W) 84(UD)*/60F*/55F/47F (10.8*/4.1W) 65F*/55F/47F/42F (3.14*/3.7) LV4400 55F/47F/42F (10.2W) 240Hz (LD650 Tool) LM9600 OLED, Cinema 3D, Smart + 4 Mode LM6200 MM LW5000 55F/47F/42F (7.4W) 55F/47F (3.2W) LD630 55F 55F/47F (7.3W) boxing 55F/47F/42F (4.3W) EM9600 LM9500 LW6500 LE7500 55F/47F/42F (5.3W) Old Tool ’12 55F/47F (3.1W : 47” CSKD Air, 55” SET LE8500 Full Air)LED Slim + 240Hz,THX, Broadband LE5500 Borderless ’11 LX9500 55F/47F(5.3W) High end Clear Screen LK330 32/26/22(3.25) CS460 32* (3.10*) CCFL, HD CCFL+HD (LD350 Tool) 5 / 153 LGE Internal Use Only Mexico DTV ’10 High end ’11 LX9500 55F/47F(5.2W) Full LED Slim + 480Hz, 3D,THX, Magic UI, Broadband LW9800 LW6500 LE7500 55F/47F/42F (5.1W) Edge LED + 120Hz, Local Dimming, Broadband LW5700 55F/47F/42F LE7300 (8.4W) Edge LED + 120Hz 55F/47F/42F (5.1W) LW5600 LX6500 LED Plus + 240Hz, 3D, Local Dimming, Broadband(LE5500 Tool) 55F/47F (9.1W) NANO Full LED+480Hz, Cinema 3D, THX(TBD), Smart TV, M3, WiFi B/in /26/22/(3.2W)/19(4.4W) LD650 55F/47F (3.1W) 240Hz, Broadband LD630 55F/47F/42F (4.3W) 240Hz (LD650 Tool) 55F LM9600 84(UD)*/60F*/55F/47F (10/15*/4.2W) OLED, 3D, Smart + 4 Mode ALEF + T480(*T240), 3D, Smart + 4 Mode LM9500 72F (6/18) IOL, T480Hz, 3D, Smart + 4 Mode 55F/47F (4.2W) 65F (5.1W) LM7600 55F/47F (3.14) WiFi in-boxing 55F/47F/42F/32F*(3.29/4.16*) LM6700 55F/47F/42F* (3.14, 4.1W*) LED +120Hz, Cinema 3D, Smart TV, M3, LED +120Hz, Cinema 3D, Smart TV, M3(옵션), WiFi in-boxing (단, 32” 는 WiFi in-boxing 없음) 55F/47F/42F (3.20) LED Plus+120Hz, Cinema 3D, Smart TV, M3, WiFi in-boxing MM LW5000 55F/47F/42F (7.3W) LED, T240Hz, 3D, Smart + 4 Mode LED, T240Hz, 3D, Smart + 3 Mode LED, T120Hz, 3D, Smart + 3 Mode (6.1W) LM6400 55F/47F LED, T120Hz, 3D, Smart + 3 Mode (9.3W) LM6450 60F LED, T120Hz, 3D+Smart LM6200 LM6210 65F*/55F/47F/42F (3.21*/3.14) LED, T120Hz, 3D, Smart + 3 Mode 47F/42F (4.1W) LED, T120Hz, 3D, Smart + 3 Mode LS5700 60F*/55F/47F/42F/32F (5.1W TBD*/3.14) LS5750 55F/47F/42F (3.21) LS5600 55F/47F/42F/37F/32F* (3.14/3.4*) (3.7) LV3520 42F/32F LED+FHD LS5650 42F (3.7) LV2500 32/26/22*/19**(2.28/4.17*/3.15**) LM5800 55F/47F/42F (3.2W) + 32F (4.3W) LE5400 Edge LED + 120Hz, Broadband 55F/47/42F(5.3W)/37F/32F(4.3W EM9600 LM8600 LED Plus+120Hz, Cinema 3D LE5300 Edge LED + 120Hz (26/22/19: Edge LED HD) ) LV4400 LV3500 55F/47F/42F (10.1W) LED+120Hz 55F*/47F**/42F/37F/32F (2.28/3.7*/3.25**) LED+FHD LED+HD LV2520 32/26(4.25) LED+HD LV2400 32 (10.1W) LED+HD LED, T120Hz, Smart + 3 Mode LED, T120Hz, Smart + 3 Mode LED, T120Hz (37/32” 60Hz) LED, T120Hz 55F/47F/42F (4.1W) LED, T120Hz, 3D LM4600 55F/47F (6.3W) LS4600 55F/47F (4.1W) LED, T120Hz, 3D LED, T120Hz LS4000 LD550 60F(5.1W) + 52F/46F/42F/32F (3.2W) 120Hz, Broadband LK550 32F(3.4w) LD520 47F/42F(3.3W), 120Hz (LH50 Tool) Low end Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 47F/42F (3.28) CCFL+120Hz, Smart TV, M3(옵션), WiFi in-boxing LS3500 42F/37F/32F (2.28) 42F/32 (4.2W) LED, 60Hz (32”: HD) 47F (4.1W) CCFL, 120Hz, LK450 Tool 47F/42F (4.1W) CCFL+FHD CM565 LK430 42F/32F*(3.25/3.28*) CS560 42F/32F (3.17) CS530 42F (3.17) CS460 32* (3.17*) LK330 32/26/22(3.14) CCFL+HD (LD350 Tool) 6 / 153 LED, T120Hz LED, HD LK450 CCFL+FHD (LD450 Tool) 50F(8.2W) 32*/26/22 (3.15*/3.19) LS3400 CS570 47F/42F/37F/32F (3.1W) LD450 FHD 47F/42F/32F (4.4W) LD420 FHD (LH30 Tool) 32/26/22/19 (3.1W) LD350 HD 32 (4.4W) LD320 HD (LH20 Tool) Old Tool ’12 (3.2W : 47” CSKD Air, 55” SET LE8500 55F/47F Full Air)LED Slim + 240Hz,THX, Broadband Mid end Borderless Clear Screen CCFL., 60Hz, 3D, LK450 Tool CCFL, 60Hz, LK450 Tool CCFL, 60Hz, LK450 Tool CCFL, HD LGE Internal Use Only ◈ CONTENT ◈ 1. ‘2011 Product line-up and features 2. Model naming and tool option 3. New features 4. Main PCBs 5. Block Diagrams, IIC Map 6. Structure of TV set and connection of sub ass’ys 7. New sub ass’ys - Instruction of new sub ass’ys - How to use tool - Download 8. Adjust way of new features 9. Repair guide 10. The latest issue and concerning issue Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 7 / 153 LGE Internal Use Only Model naming and Tool option Standard of 2012y Model Name 12Y model name Description of Tool Options Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes ToolOption 8 / 153 LGE Internal Use Only ◈ CONTENT ◈ 1. ‘2011 Product line-up and features 2. Model naming and tool option 3. New features 4. Main PCBs 5. Block Diagrams, IIC Map 6. Structure of TV set and connection of sub ass’ys 7. New sub ass’ys - Instruction of new sub ass’ys - How to use tool - Download 8. Adjust way of new features 9. Repair guide 10. The latest issue and concerning issue Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 9 / 153 LGE Internal Use Only EPI Interface EPI(Embedded Point-Point Interface) Features • • • • • Point-Point topology (support 2 Pair option) CDR (Clock Data Recovery) Bandwidth up to 1.85Gbps/pair at FHD 120Hz 10 bit application Lock signal cascading and feedback to T-Con VCC Embedded Control Data TCON LOCK 2 1 Merits • • • • Figure1. Topology Better reliability on common noise No data skew and better EMI margin Fewer lines than mini-LVDS Slim PCB design Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 10 / 153 LGE Internal Use Only EPI Interface (mini-LVDS vs. EPI) Comparison What to change HF mini-LVDS LCM (T-con to S-Driver IC) FHD (10bit) HF miniLVDS 60Hz 120Hz 240Hz No. of Signal 36 36 72 Connector 60pin (2ea) 60pin (2ea) 80pin (2ea) HF mini-LVDS TCON 18 VCC -Difficult to upgrade bandwidth limit -Multiple number of wires needed for higher bandwidth 18 1 (FHD 120Hz) EPI (Embedded clock P-to-P Interface) FHD (10bit) EPI 60Hz 120Hz 240Hz 960ch 960ch 720ch No. of Signal 12 12 32 Connector - 50 pin (2ea) 70pin (2ea) EPI LOCK 2 VCC -Better reliability on common noise -No data skew. Better EMI margin -Lower cost ( Cable, Connector ) -Slim S-PCB design (14mm Æ 10mm) helps slimmer TV Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes TCON 1 (FHD 120Hz) * Bandwidth Capability - FHD 120Hz 10Bit : 594Mbps@36Lines → 1.65Gbps@12Lines - FHD 240Hz 10Bit : 594Mbps@72Lines → 1.25Gbps@32Lines 11 / 153 LGE Internal Use Only EPI Interface (mini-LVDS vs. EPI) HF mini-LVDS EPI TCON TCON Lock Topology 2 1 Protocol Features @10bit, FHD120 Merit Demerit • Multi Drop • Data rate: 660Mbps • External clock • Point to Point • Data rate : 1.8Gbps • Embedded clock, Control • Simple structure • Standardization • Fewer Lines : 12 • Embedded clock : low EMI, Clock skew free • Easy to PCB design • • • • • Transmission Overhead : 4bit delimiter Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes Too many lines : 36 Clock skew EMI due to clock lines Bandwidth limit 12 / 153 LGE Internal Use Only ◈ CONTENT ◈ 1. ‘2011 Product line-up and features 2. Model naming and tool option 3. New features 4. Main PCBs 5. Block Diagrams, IIC Map 6. Structure of TV set and connection of sub ass’ys 7. New sub ass’ys - Instruction of new sub ass’ys - How to use tool - Download 8. Adjust way of new features 9. Repair guide 10. The latest issue and concerning issue Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 13 / 153 LGE Internal Use Only Main PCB for Broadband Chassis : LA22E PCB P/No : EAX64434205 xxLS5700-UA 1 To PSU 2 All model 1 4 To module WIFI Only for Dev 1 Main processor, DDR Memory eMMC Memory 2 Micom for Key/IR sensing 3 Audio AMP (10W+10W) 4 LVDS &EPI Wafer 2 Soft touch +IR Front Spk 2 3 2 1 RF Assy Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 14 / 153 LGE Internal Use Only ◈ CONTENT ◈ 1. ‘2011 Product line-up and features 2. Model naming and tool option 3. New features 4. Main PCBs 5. Block Diagrams, IIC Map 6. Structure of TV set and connection of sub ass’ys 7. New sub ass’ys - Instruction of new sub ass’ys - How to use tool - Download 8. Adjust way of new features 9. Repair guide 10. The latest issue and concerning issue Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 15 / 153 LGE Internal Use Only MTK5369 Block Diagram( LS57 ) ANALOG DEMOD Air/ Cable P_TS DIGITAL DEMOD (T/C) TUNER (S2) P_TS DDR IF(+/-) DVB-S X_TAL 27MHz CI slot TUNER (T/C) DIGITAL DEMOD (S2) CVBS P_TS USB1 USB2 LNB SYSTEM DDR3 X 1600 X 16 (2Gb) SYSTEM DDR3 X 1600 X 16 (2Gb) CONTROLER A/B CVBS TS_S/P Side HDMI2 eMMC X 1 (4GB) (HDCP HDMI MUX HDMI3 EEPROM) LVDS HDMI4 MTK I2S Out SPI : according to input spec 50P Audio AMP (NTP7500 or STA380) LOCAL DIMMING M-Remote Module UART Rear PC-AUDIO 51P 41P 50P EPI PC-RGB SYSTEM DDR3 X 1600 X 16 (2Gb) SYSTEM EEPROM X 1 (256Kb) USB USB3 USB_WIFI HDMI1 T/C Demod SYSTEM DDR3 X 1600 X 16 (2Gb) RGB,H/V L/R In IR OPTIC SPDIF OUT I2C LAN Ethernet UART Sub Micom (RENESAS) Remote Control RS-232C only Dev Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 16 / 153 LGE Internal Use Only Jack Interface Main SoC MTK SPDIF_OUT [SPDIF_OUT] [ASPDIF0] SPDIF Full Scart(18 Pin Gender) SC_R/G/B + [PR0P],[PB0P],[Y0P] SC_DET [OPCTRL8] SC_L/R_IN [AIN0_L_ADDC] [AIN0_R_AADC] SC_FB [SOY0] SC_ID [ADIN0_SRV] SC_CVBS_IN [CVBS2P] DTV/MNT_V_OUT DTV/MNT_L_OUT DTV/MNT_R_OUT AV1_CVBS_IN AV1_L_IN AV1_R_IN AV1_CVBS_DET [CVBS0P] [AIN3_L_AADC] [AIN3_R_AADC] [OPCTRL5] CVBS 1 PHONE JACK [AL0_ADAC] [AR0_ADAC HP_LOUT_MAIN HP_ROUT_MAIN IC6100 TPA6132A2 HP_LOUT_AMP HP_ROUT_AMP EARPHONE JACK [VDACX_OUT] [VDACY_OUT] IC6000 AZ4580M [SCART_LOUT] [AUOUTL0] [SCART_ROUT] [AUOUTR0] PC_L_IN [AIN2_L_AADC] [AIN2_R_AADC] PC AUDIO PC_R_IN RGB_PC COMP 1 PHONE JACK COMP1_Y/Pb/Pr COMP1_DET [Y1P],[PB1P],[PR1P] [OPCTRL7] [OPCTRL9] [VGA_SCL] [VGA_SDA] [RP],[GP],[BP] [VSYNC], [HSYNC] Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 17 / 153 DSUB_DET RGB_DDC_SCL RGB_DDC_SDA DSUB_R+, DSUB_G+, DSUB_B+ DSUB_VSYNC, DSUB_HSYNC LGE Internal Use Only GP4 Backend block diagram (EPI & T-con) VCC 50Pin EPI LEFT SWN VGL_FB CTRLN IC7700 TPS65178 VDD CTRLP VGH_FB Main SoC MTK [TCON6] [TCON5] [TCON4] [TCON3] VGL_I VCOM_P/N/LOOP SWP VCOM, GIP_RST DISCHG EO_SOC EO GST_SOC GST MCLK_SOC R (47옴) GCLK_SOC MCLK GCLK VGL_I R(0옴) OPT VGH_ODD, VGH_EVEN IC7701 TPS65198 VGH_R, VGH_F, VST CLK1~6_I R CLK1~6 (0옴) 50Pin EPI RIGHT Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 18 / 153 LGE Internal Use Only GP4 Backend block diagram (EPI & T-Con) VCC18 50Pin EPI LEFT Vcore H_VDD VDD TXA1N/P, TXACLKN/P, TXA4N/P EPI CH1/2/3 PMIC_RESET [OPCTRL11] I2C_SDA2 [OPCTRL10] I2C_SCL2 IC7700 TPS65178 GMA[4][5][7][12][15] GMA[1][3][9][10][12][14][15][16][18] VCOM_DYN [TCON8] EPI_LOCK3 [TCON7] Z_OUT Main SoC MTK VCOMLFB EPI_LOCK6_SOURCE EPI_LOCK6 VCOMRFB EPI CH4/5/6 TXA0N/P, TXB1N/P, TXB2N/P VCC18 Vcore H_VDD VDD Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 19 / 153 50Pin EPI RIGHT LGE Internal Use Only GP4 Backend block diagram (LVDS Tx & Local Dimming) [LDM_CK] [LDM_D0] [STB_SCL] [STB_SDA] L/DIMO_SCLK L/DIMO_MOSI I2C_SCL1 I2C_SDA1 L/DIMO_VS [LDM_VSYNC] Main SoC MTK PANEL_VCC (+12V) Dual-link LVDS Output 24 10-bit (R) LVDS Tx Block LVDS_SEL 51Pin LVDS Output BIT_SEL_LOW Dual-link LVDS Output 24 10-bit (R) 41Pin LVDS Output • LVDS_SEL : “H”=JEIDA, “L” or NC=VESA (LGD) • BIT_SEL : “H” or NC = 10-bit, “L” = 8-bit Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 20 / 153 LGE Internal Use Only ◈ CONTENT ◈ 1. ‘2011 Product line-up and features 2. Model naming and tool option 3. New features 4. Main PCBs 5. Block Diagrams, IIC Map 6. Structure of TV set and connection of sub ass’ys 7. New sub ass’ys - Instruction of new sub ass’ys - How to use tool - Download 8. Adjust way of new features 9. Repair guide 10. The latest issue and concerning issue Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 21 / 153 LGE Internal Use Only Interconnection - 1 [PCBs] 47LS5700-UA 3 2 1 1 Main PCB 2 Power Board 3 IR+Soft touch PCB 4 RF Assy 5 WIFI Assy 1 [Cables] 2 1 Main / LPB 24Pin cable 2 Main / Module LVDS Cable 3 LED driver / PSU 4 10Pin (IR+Touch) Cable 5 SPK Cable 6 RF Assy Cable 7 WIFI Assy Cable 5 T-con Driver 8 7 6 3 Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 4 5 4 22 / 153 LGE Internal Use Only ◈ CONTENT ◈ 1. ‘2011 Product line-up and features 2. Model naming and tool option 3. New features 4. Main PCBs 5. Block Diagrams, IIC Map 6. Structure of TV set and connection of sub ass’ys 7. New sub ass’ys - Instruction of new sub ass’ys - How to use tool - Download 8. Adjust way of new features (widevine…) 9. Repair guide 10. The latest issue and concerning issue Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 23 / 153 LGE Internal Use Only Introductions of 12Y Model Soft-touch Ass’y 목차 - Introductions of soft-touch 2011년 12월 13일 LCD TV 사업부 LCD TV 연구소 / BP그룹 Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 24 / 153 LGE Internal Use Only 2012Y IR + Soft touch PCB Pinmap Circuit Block Diagram KEY1, KEY2 Voltage (Tolerance of voltage ±0.2V) Ass’y Picture Pin Configuration Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 25 / 153 LGE Internal Use Only 2012Y IR + Soft Touch LED Lighting Scenario Power LED Scenario Spec 내용 구분 - 12Y GP4 High(L9), GP4 Mid(MTK), GP4 Low(S7LR2) Æ “ Power Light” UI Delete compared with 11Y(GP3 model) - 11Y Carry Over Model : 12Y same Power LED scenario process Æ “ Power Light “ UI Delete, The way of 11Y Soft Touch Ass’y is used. White LED Disable - Power On - Stand-By condition to Red LED On : After DC ON, Red LED light Blinks twice and then Red LED is Off - Stand-By condition to Red LED Off : After DC ON, Red LED light Blinks three times and then Red LED is Off - Power Off - Without Blink, Red LED On immediately But, If the mode of Power Indicator UI is Stand-By, keep staying Red LED Off status - Power Indicator UI User Condition GP4 (High/Mid/Low) Power LED 시나리오 Factory Condition 비고 Remote Key - When you put the remote Control button, Red LED Blinks once input - Warm Stand-by - Red LED On stays and In the case of Set On, Red LED turns Off Æ Including DVR Ready model, Japanese model Same as the 11Y 3D mode - Red LED Off (Power On condition is identical) Same as the 11Y Factory Default Mode (In-Stop) - 12Y LED Model : Stand-By On (Red LED On) - 12Y CCFL Model : Stand-By On (Red LED On) - 11Y Carry Over Model (CS5XX/CM5XX) : Stand-By On (Red LED On) - After In-Stop, Red LED On is processed and after In-Stop, Red LED turns on within 3 sec - - In the case of Power Only On, Red LED turns Off - In the case of DC Off, Red LED turns On - Power Only Mode Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 26 / 153 LGE Internal Use Only Introductions of GP4 Sensor (Touch IC) Manual of Touch Sensitivity 1. Verify the number of THR at first. 2. Once you correctly touch Touch button for more than 1 sec, you can see a Touch data while you keep touching the button. 3. Keep in mind that you can only read the Touch data during touch status. 4. It doesn’t matter that Touch data gets low value after taking off your finger. Touch Key Threshold Level (Ta = 25ºC ) Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 27 / 153 LGE Internal Use Only Introductions of GP4 Sensor (Touch IC) Touch EEPROM Register change with USB port 1. Write all of the address, value (Hex) as a below. capable of only Touch.txt file based on the left picture 2. Make the file [ Filename : ‘Touch.txt’ ] and move it to USB (The outermost area, Don’t move it to any folder) 3. Connect USB to TV and press button ‘ADJ menu’ and then choose the ‘touch sensitivity setting’ 4. Press button ‘SIMPLINK (Simply Link key)’ and then you can see the OK Pop up. 5. After that, you check it the IR LED version on In-start menu and verify it that the number of version is changed to what you want. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 28 / 153 Addr Value LGE Internal Use Only Introductions of 12Y RF ass’y + Magic Remote control 목차 - Introductions of 12Y RF ass’y + Magic Remote control 2011년 12월 19일 LCD TV 사업부 LCD TV 연구소 / BP그룹 Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 29 / 153 LGE Internal Use Only 1. System UART or USB RF RF Receiver Remote TV Pairing Information Transmission (Send to TV after Paired) • Static Calibration Data (Bypass only) • Remote FW ver. (Save also in Receiver) • BD_ADDR (Save also in Receiver) • Pairing Information Transmission Sequence • When it is paired, the remote sends packets(pairing success, F/W version, BD_ADDR) to the receiver. • The receiver sends the pairing success packet to TV directly. • F/W version and BD_ADDR packets are just saved on the receiver. • The receiver sends F/W version or BD_ADDR packet to TV when it is required. Motion Data Transmission • Period : 7.5msec • Motion Data : gyro, accelerometer Voice Data Transmission • Period : 10msec • Voice sampling : 16khz 16bit Æ See “6-2. Packets” on page 8. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 30 / 153 LGE Internal Use Only 2. Remote Buttons (M3 vs. M4) RF Unpaired RF Paired IR continuous IR_CODE RF_CODE repeat POWER 0x08 0x08 Y BACK 0x28 0x8028 Y HOME 0x7C 0x807C Y ← 0x07 0x8007 Y → 0x06 0x8006 Y ↑ 0x40 0x8040 Y ↓ 0x41 0x8041 Y OK 0x75 0x8044 Y CH + 0x00 0x8000 Y CH - 0x01 0x8001 Y VOL + 0x02 0x8002 Y VOL - 0x03 0x8003 Y MUTE 0x09 0x8009 Y 3D_Mode 0xDC 0x80DC Y MyAPPS 0x42 0x8042 Y 0x800A Y BUTTON power mute home power back home ↑ ↑ ← ok → ← ok → ↓ ↓ vol ch voice Phsical Buttons volmutech 3D star VOICE Logical Buttons M3 Remote M4 Remote Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes AUTO_WAKEUP X 0x800C VOICE_START X 0x800A VOICE_STOP X 0x800D POINT_START X 0x803E POINT_STOP X 0x803F 31 / 153 ETC. IR only . = VOICE_START LGE Internal Use Only 3. M4 Block Diagram MPU-3050 (Gyro) (Invensense) I2C Antenna Antenna I2C LIS331DLH(Accel.) (STMicro) BCM20702M X-tal 24 MHz BCM20733M (BROADCOM) Bluetooth 3.0 Voice (BROADCOM) Bluetooth 4.0 512Kbit (Serial Flash) SPI I2S 256Kbit (E2PROM) WM8950 (Wolfson) SPI X-tal 20 MHz MIC. (Knowles) Key Button (4x5) UART M4 4-mode Only Power Management Connector AA x 2 Battery DC-DC 2.8V LDO 2.8V LDO Bluetooth Remocon Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes Bluetooth Receiver 32 / 153 LGE Internal Use Only 4. Function list 주요 Item IC Voice Codec Manufacturer Function WM8950 Wolfson 16KHz Sampling of Audio data SPU0414HR5H Knowles Sensing Voice Voice MEMS Mic. Motion Sensor Gyro Sensor Accelerometer RF Antenna Remocon RF + Micom X-tal RF + Micom DC-DC Converter ITG3050 Invensense Sensing angular velocity of X, Y, Z-axis MMA8452 Stmicro Sensing device tilt (Pitch & Roll angle) SDBTPTR3015 Partron 24MHz Partron BCM20733 Broadcom TPS61097 TI Wireless communication Battery Boost up Regulator LDO1 uPI7716 uPI RF, Gyro, Accelerometer Power Supply LDO2 uPI7716 uPI Audio Codec, Mic. Power Supply Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 33 / 153 LGE Internal Use Only 5. RF Pairing / Un-pairing Method Method RF Pairing RF Unpairing Description Method1 – If unpaired, just press "OK" button. – If paired, press "OK" button after unpairing. Method 2 (Repairing) – Press “BACK" button for 5 sec. • When do pairing, the remote should make pairing request IR signal(0x29) to TV. • When TV receive the IR signal, it should send "pairing request packet" to the RF receiver. • After pairing success, the remote should blink LED for some time and TV send "pairing success packet" back to TV. • When remote try to unpairing, it doesn’t care about state of receiver(stand alone). Press “HOME" button and “BACK" button at the same time for 5 sec. • When remote try to unpairing, it doesn’t care about state of receiver(stand alone). • After unpairing, all pairing information should be erased. • After unpairing, LED should be blinked for 3sec. • The remote just becomes to IR mode. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 34 / 153 LGE Internal Use Only Introductions of 12Y WIFI built in ass’y 목차 -Introductions of WIFI built in ass’y 2011년 12월 21일 LCD TV 사업부 LCD TV 연구소 / BP팀 Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 35 / 153 LGE Internal Use Only WIFI Built in ass’y feature(LGIT) WIFI built in feature - Pin map PIN USB interface 1 5V 2 DM 3 DP 4 GND - Block diagram Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 36 / 153 LGE Internal Use Only WIFI Built in Block-diagram(Arcadyan) Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 37 / 153 LGE Internal Use Only WIFI Built in ass’y Specification Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 38 / 153 LGE Internal Use Only ◈ CONTENT ◈ 1. ‘2011 Product line-up and features 2. Model naming and tool option 3. New features 4. Main PCBs 5. Block Diagrams, IIC Map 6. Structure of TV set and connection of sub ass’ys 7. New sub ass’ys - Instruction of new sub ass’ys - How to use tool - Download 8. Adjust way of new features 9. Repair guide 10. The latest issue and concerning issue Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 39 / 153 LGE Internal Use Only 12Y Widevine & HDCP 2.0 & NETFLX Contents 표지 1. Widevine? 2. HDCP 2.0 & NETFLIX? 3. DTCP? 4. Changed BOM 2011년 12월 22일 LCD TV 사업부 LCD TV 연구소 / BP그룹 Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 40 / 153 LGE Internal Use Only 1. Widevine? [Widevine] Widevine is the Solution(Library) offering Adaptive Streaming and DRM. In BBTV, when special CP do service, this module is required key. Currently CP which is requested to widevine, is typically Australian Bigpond Live and North American CinemaNow. Furthermore, because the future will be the spread of CP, widevine key download for the global model should be applied to production. (Because operation unique key should be downloaded for Widevine , Widevine key dowmload by NSU is impossible.) [Widevine Key] Widevine Key is unique data stored TV for using Widevine. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 41 / 153 LGE Internal Use Only 2. HDCP 2.0 & NETFLIX? HDCP 9 High-bandwidth Digital Content Protection 9 Protect high-value digital motion pictures, television programs and audio against unauthorized interception and copying between a digital set top box or digital video recorder and a digital TV or PC. 9 Specification developed by Intel Corporation to protect digital entertainment across the DVI/HDMI interface. Why HDCP2.0? 9 HDCP revision 2.0 supports a broader range of wired and wireless interfaces. Netflix 9 the services maintain a huge selection of movies and latest releases and offer DVD rentals via mail & online streaming. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 42 / 153 LGE Internal Use Only 3. DTCP? [DTCP] The Digital Transmission Content Protection Specification defines a cryptogrphic protocol for protecting audio/video entertainment content from unauthorized copying, intercepting, and tampering as it traverses digital transmission mechanisms such as a high-performance serial bus that conforms to the IEEE 1394-1995 standard. Only legitimate entertainment content delivered to a source device via another approved copy protection system (such as the DVD Content Scrambling System) will be protected by this protection system. [Three cryptographic Keys] • Authentication Key which is formed as a result of authentication and used to protect the exchange keys. •Exchage Key which is used to set up and protect content streams. •Content Key which is used to encrpt the content being exchanged. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 43 / 153 LGE Internal Use Only 4. Changed BOM As-Was Current Æ 추가 Add Item 1.Marlin (Yes/No) 2.CNTV (Yes/No) 3.HDCP Tx (Yes/No) 4.DTCP Rx (Yes/No) 5.HDCP Rx (Yes/No) 주3) CNTV [Yes] : China Smart TV Only Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 44 / 153 LGE Internal Use Only 4. Changed BOM Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 45 / 153 LGE Internal Use Only ◈ CONTENT ◈ 1. ‘2011 Product line-up and features 2. Model naming and tool option 3. New features 4. Main PCBs 5. Block Diagrams, IIC Map 6. Structure of TV set and connection of sub ass’ys 7. New sub ass’ys - Instruction of new sub ass’ys - How to use tool - Download 8. Adjust way of new features 9. Repair guide 10. The latest issue and concerning issue Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 46 / 153 LGE Internal Use Only Contents of LCD TV Standard Repair Process No. Error symptom (High category) Error symptom (Mid category) Page 1 No video/Normal audio 1 2 No video/No audio 2 3 A. Video error Video error, video lag/stop, fail tunning 3, 4 4 Color error 5 5 Vertical/Horizontal bar, residual image, light spot, external device color error 6 6 No power 7 Off when on, off while viewing, power auto on/off 8 No audio/Normal video 9 9 Wrecked audio/discontinuation/noise 10 10 No response in remote controller, key error, recording error, memory error 11 External device recognition error 12 B. Power error 7 8 Remarks C. Audio error D. Function error 11 12 E. Noise Circuit noise, mechanical noise 13 13 F. Exterior error Exterior defect 14 First of all, Check whether there is SVC Bulletin in GCSC System for these model. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 47 / 153 LGE Internal Use Only Contents of LCD TV Standard Repair Process Detail Technical Manual No. Error symptom 1 Content Page Check LCD back light with naked eye A1 LED driver B+ 24V measuring method A2 Check White Balance value A3 Power Board voltage measuring method A4 TUNER input signal strength checking method A6 LCD-TV Version checking method A7 9 LCD TV connection diagram A8 10 Tuner Checking Part A9 Check Link Cable (LVDS) reconnection condition A10 A11 12 Adjustment Test pattern - ADJ Key A12 13 LCD TV connection diagram A8 Check Link Cable (LVDS) reconnection condition A10 A11 15 Adjustment Test pattern - ADJ Key A12 16 Exchange T-Con Board (1) A-1/5 17 Exchange T-Con Board (2) A-2/5 Exchange LED driver Board (PSU) A-3/5 19 Exchange Module itself (1) A-4/5 20 Exchange Module itself (2) A-5/5 2 3 A. Video error_ No video/Normal audio 4 6 7 11 14 18 A. Video error_ No video/Video lag/stop A. Video error_Color error A. Video error_Vertical/Horizontal bar, residual image, light spot Defected Type caused by T-Con/ Inverter/ Module Remarks A10 : 32/37/42/47/55 A11 : 32 AUO A10 : 32/37/42/47/55 A11 : 32 AUO 55” : driver board Other : PSU Continue to the next page Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 48 / 153 LGE Internal Use Only Standard Repair Process Error symptom LCD TV A. Video error Established date No video/ Normal audio Revised date 2010. 12 .14 1/13 First of all, Check whether all of cables between board is inserted properly or not. (Main B/D↔ Power B/D, LVDS Cable,Speaker Cable,IR B/D Cable,,,) ☞A1 No video Normal audio Normal audio Y Check Back Light On with naked eye N Move to No video/No audio ☞A4 Y On Check Power Board 12v,3.5v etc. N ☞A2 Normal voltage Y N Y ☞A28 Repair Power Board or parts Check Power Board 24v output Normal voltage Replace T-con Board or module And Adjust VCOM Replace Inverter or module End N Repair Power Board or parts ※Precaution ☞A7 & A3 Always check & record S/W Version and White Balance value before replacing the Main Board Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes Replace Main Board 49 / 153 Re-enter White Balance value LGE Internal Use Only Standard Repair Process LCD TV Error symptom A. Video error Established date No video/ No audio Revised date 2010. 12 .14 2/13 ☞A4 No Video/ No audio Check various voltages of Power Board ( 3.5V,12V,20V or 24V…) Normal voltage? Y N Check and replace MAIN B/D End Replace Power Board and repair parts Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 50 / 153 LGE Internal Use Only Standard Repair Process Error symptom LCD TV ☞ A6 Check RF Signal level Normal Signal? Y A. Picture Problem Established date Picture broken/ Freezing Revised date Check whether other equipments have problem or not. (By connecting RF Cable at other equipment) → DVD Player ,Set-Top-Box, Different maker TV etc` ■ Menu→Setup →Booster ☞ A7 Check RF Cable Connection 1. Reconnection 2. Install Booster Normal Picture? Y Check S/W Version SVC Bulletin? N Y N N 3/13 . By using Digital signal level meter . By using Diagnostics menu on OSD ( Menu→ Set up→ Support → Signal Test ) - Signal strength (Normal : over 50%) - Signal Quality (Normal: over 50%) N Normal Picture? 2010. 12 .14 S/W Upgrade Y Y Normal Picture? Close N Check Tuner soldering Contact with signal distributor or broadcaster (Cable or Air) Normal Picture? Booster menu On→Off: Check Off→On: Check N Replace Main B/D Y Close Close Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 51 / 153 LGE Internal Use Only Standard Repair Process Error symptom LCD TV ☞ A6 Check RF Signal level Normal Signal? Y N A. Picture Problem (DVB-S/S2) Established date Tuning fail, Picture broken/ Freezing Revised date 2011. 01 .24 3/13 Check RF signal cable (DVB satellite signal or not) Check whether other equipments have problem or not. (By connecting RF Cable at other equipment) → Set-Top-Box, Different maker TV etc Check satellite setting. - Check LNB frequency. - Check satellite - Check Satellite connection (DiSEqC, motor, etc…) ☞ A7 Y Normal setting? Check S/W Version N SVC Bulletin? Check Tuner soldering Replace Main B/D Y N S/W Upgrade Contact with signal distributor or broadcaster (Cable or Air) Change satellite setting (match with installed ANT) Normal Picture? N Y Normal Picture? N Close Close Y Close Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 52 / 153 LGE Internal Use Only Standard Repair Process LCD TV Error symptom ☞A8 A. Video error Established date Color error Revised date 2010. 12 .14 4/13 ☞ A10/ A11 Check color by input -External Input -COMPONENT -RGB -HDMI/DVI Color error? Y N ※ Check and replace Link Cable (LVDS) and contact condition Y Color error? Y Color error? Replace Main B/D N N End Check error color input mode ☞A12 Check Test pattern Replace module External Input/ Component error Check external device and cable External device Y /Cable normal Replace Main B/D N Request repair for external device/cable N RGB/ HDMI/DVI error Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes Check external device and cable 53 / 153 External device Y /Cable normal Replace Main B/D LGE Internal Use Only Standard Repair Process LCD TV Established date A. Video error Error symptom Vertical / Horizontal bar, residual image, light spot, external device color error 2010. 12 .14 Revised date 5/13 Vertical/Horizontal bar, residual image, light spot Replace Module ☞A8 ☞ A10/ A11 Check color condition by input -External Input -Component -RGB -HDMI/DVI Screen Y normal? Check external device connection condition Y Normal? Screen normal? N N N Replace Main B/D (adjust VCOM) Screen normal? For LGD panel Y Y Request repair for external device Replace module ☞A12 Check and replace Link Cable N ☞ A28 End Replace Main B/D End For other panel Check Test pattern External device screen error-Color error Check S/W Version Check version N Y External Input error Component error S/W Upgrade Normal screen? Check screen condition by input -External Input -Component -RGB -HDMI/DVI N Y RGB error HDMI/ DVI End Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 54 / 153 Connect other external device and cable (Check normal operation of External Input, Component, RGB and HDMI/DVI by connecting Jig, pattern Generator ,Set-top Box etc. Connect other external device and cable (Check normal operation of External Input, Component, RGB and HDMI/DVI by connecting Jig, pattern Generator ,Set-top Box etc. N Screen normal? Replace Main B/D Y Request repair for external device Y Screen normal? N Replace Main B/D LGE Internal Use Only Standard Repair Process LCD TV Error symptom B. Power error Established date No power Revised date ☞A17 Check Power LED . Stand-By: Red . Operating: white 2010. 12 .14 6/13 ☞A19 DC Power on by pressing Power Key On Remote control Y Power LED On? N Normal N operation? Check Power On ‘”High” OK? Replace Power B/D Y N Y Check Power cord was inserted properly Replace Main B/D ☞A4 Measure voltage of each output of Power B/D N Normal? Y Close Y ※ Check ST-BY 3.5V Normal Y voltage? ☞A18 Normal voltage? Y Replace Main B/D N Replace Power B/D N Replace Power B/D Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 55 / 153 LGE Internal Use Only Standard Repair Process LCD TV Established date B. Power error Error symptom Off when on, off while viewing, power auto on/off 2010. 12 .14 Revised date 7/13 Check outlet ☞A22 Check A/C cord Error? N Check Power Off Mode CPU Abnormal Normal? Replace Main B/D Y End N Check for all 3- phase power out Y Abnormal 1 ☞A19 Fix A/C cord & Outlet and check each 3 phase out (If Power Off mode is not displayed) Check Power B/D voltage ※ Caution Check and fix exterior of Power B/D Part * Please refer to the all cases which can be displayed on power off mode. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes Replace Power B/D Normal voltage? Y Replace Main B/D N Replace Power B/D Status Power off List "POWEROFF_REMOTEKEY" "POWEROFF_OFFTIMER" "POWEROFF_SLEEPTIMER" "POWEROFF_INSTOP" "POWEROFF_AUTOOFF" Normal "POWEROFF_ONTIMER" "POWEROFF_RS232C" "POWEROFF_RESREC" "POWEROFF_RECEND" "POWEROFF_SWDOWN" "POWEROFF_UNKNOWN" "POWEROFF_ABNORMAL1" Abnormal "POWEROFF_CPUABNORMAL" 56 / 153 Power Power Power Power Power Power Power Power Power Power Power Power Power off off off off off off off off off off off off off Explanation by REMOTE CONTROL by OFF TIMER by SLEEP TIMER by INSTOP KEY by AUTO OFF by ON TIMER by RS232C by Reservated Record by End of Recording by S/W Download by unknown status except listed case by abnormal status except CPU trouble by CPU Abnormal LGE Internal Use Only Standard Repair Process LCD TV Error symptom C. Audio error Established date No audio/ Normal video Revised date ☞A24 No audio Screen normal Check user menu > Speaker off 2010. 12 .14 8/13 ☞A25 N Off Check audio B+ 24V of Power Board Normal voltage Y N Cancel OFF Check Speaker disconnection Y Replace Power Board and repair parts N Disconnection Replace MAIN Board End Y Replace Speaker Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 57 / 153 LGE Internal Use Only Standard Repair Process LCD TV C. Audio error Error symptom Wrecked audio/ discontinuation/noise Established date 2010. 12 .14 Revised date 9/13 → abnormal audio/discontinuation/noise is same after “Check input signal” compared to No audio ☞A25 Check input signal -RF -External Input signal Wrecked audio/ Discontinuation/ Noise for all audio Signal normal? Check and replace speaker and connector Check audio B+ Voltage (24V) Y Y Wrecked audio/ Discontinuation/ Noise only for D-TV N Normal voltage? Replace Main B/D N Wrecked audio/ Discontinuation/ Noise only for Analog (When RF signal is not received) Request repair to external cable/ANT provider (In case of External Input signal error) Check and fix external device Replace Power B/D Replace Main B/D Wrecked audio/ Discontinuation/ Noise only for External Input Connect and check other external device Normal audio? End N Y Check and fix external device Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 58 / 153 LGE Internal Use Only Standard Repair Process Error symptom LCD TV D. General Function Problem Established date Remote control & Local switch checking Revised date 2010. 12 .14 10/13 1. Remote control(R/C) operating error ☞A27 Check R/C itself Operation ☞A27 Check & Repair Cable connection Connector solder Y Normal operating? N Normal operating? N Check & Replace Baterry of R/C If R/C operate, Explain the customer cause is interference from light in room. Normal operating? ☞A27 Check B+ 3.5V On Main B/D Y Check R/C Operating When turn off light in room Replace Main B/D ☞A4 Close Normal Voltage? Y Check IR Output signal N Check 3.5v on Power B/D Replace Power B/D or Replace Main B/D (Power B/D don’t have problem) Normal Signal? Y N Repair/Replace IR B/D Close N Replace R/C Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 59 / 153 LGE Internal Use Only Standard Repair Process LCD TV Check input signal Established date D. Function error Error symptom External device recognition error Y Signal input? N Check and fix external device/cable Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes Check technical information - Fix information - S/W Version Technical information? 2010. 12 .14 Revised date N External Input and Component Recognition error 11/13 Replace Main B/D Y Fix in accordance with technical information 60 / 153 RGB,HDMI/ DVI, Optical Recognition error Replace Main B/D LGE Internal Use Only Standard Repair Process LCD TV Identify nose type Error symptom Circuit noise Mechanical noise E. Noise Established date Circuit noise, mechanical noise Revised date Check location of noise 12/13 Replace PSU(with LED driver) OR Replace LED driver Check location of noise ※ When the nose is severe, replace the module (For models with fix information, upgrade the S/W or provide the description) ※ Mechanical noise is a natural phenomenon, and apply the 1st level description. When the customer does not agree, apply the process by stage. ※ Describe the basis of the description in “Part related to nose” in the Owner’s Manual. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 2010. 12 .14 OR OR 61 / 153 ※ If there is a “Tak Tak” noise from the cabinet, refer to the KMS fix information and then proceed as shown in the solution manual (For models without any fix information, provide the description) LGE Internal Use Only Standard Repair Process LCD TV F. Exterior defect Error symptom Zoom part with exterior damage Exterior defect Module damage Replace module Established date Revised date 2010. 12 .14 13/13 Adjust VCOM ☞A28 Cabinet damage Remote controller damage Stand dent Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes Replace cabinet Replace remote controller Replace stand 62 / 153 LGE Internal Use Only Contents of LCD TV Standard Repair Process Detail Technical Manual Continued from previous page No. Error symptom Content Page 21 Check front display LED A17 22 Check power input Voltage & ST-BY 5V A18 Checking method when power is ON A19 POWER BOARD voltage measuring method A4 23 B. Power error_No power 24 Remarks 25 26 B. Power error_Off when on, off while viewing POWER OFF MODE checking method A22 27 B. Power error_Off when on, off while viewing POWER BOARD PIN voltage checking method A19 Checking method in menu when there is no audio A24 Voltage and speaker checking method when there is no audio A25 28 C. Audio error_No audio/Normal video 29 30 C. Audio error_Wrecked audio/discontinuation Voltage and speaker checking method in case of audio error A25 31 D. Function error_ No response in remote controller, key error Remote controller operation checking method A27 32 D. VCOM Adjustment Sequence of the Vcom adjustment A28 Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 63 / 153 LGE Internal Use Only Standard Repair Process Detail Technical Manual LCD TV Error symptom A. Video error_No video/Normal audio Content Check White Balance value Established date Revised date 2010. 12 .14 A4 Entry Entry method method 1. Press Press the the ADJ ADJ button button on on the the remote remote controller controller for for adjustment. adjustment. 1. 2. Enter Enter into into White White Balance Balance of of item item 7. 6. 2. 3. 3. After After recording recording the the R, R, G, G, B B (GAIN, (GAIN, Cut) Cut) value value of of Color Color Temp Temp (Cool/Medium/Warm), (Cool/Medium/Warm), rereenter the value after replacing the MAIN BOARD. enter the value after replacing the MAIN BOARD. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 64 / 153 LGE Internal Use Only Standard Repair Process Detail Technical Manual LCD TV Error symptom A. Video error_No video/ Audio Content Power Board voltage measuring method Established date Revised date 2010. 12 .14 A5 Check the DC 24V, 12V, 3.5V. 24 Pin (Power Board ↔ Main Board) - 공통 Edge LED SMAW200-H24S (YEONHO) 1 Power on 2 24V 3 24V 4 24V 5 GND 6 GND 7 GND 8 GND 9 3.5V 10 3.5V 11 3.5V 12 3.5V 13 GND 14 GND 15 GND 16 GND 17 12V 18 Inverter On/off 19 12V 20 Lamp : A-Dim LED : N.C 21 12V 22 PWM Dim #1 24 Error-out 23 Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes GND/P_DIM2 • Lamp SCANNING Model : PWM Dim #2 65 / 153 LGE Internal Use Only Standard Repair Process Detail Technical Manual LCD TV Error symptom A. Video error_Video error, video lag/stop Content TUNER input signal strength checking method Established date Revised date 2010. 12 .14 A6 MENU -Æ Set up Æ support -Æ signal test -Æ select channel When the signal is strong, use the attenuator (-10dB, -15dB, -20dB etc.) Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 66 / 153 LGE Internal Use Only Standard Repair Process Detail Technical Manual Error symptom LCD TV Content A. Video error_Video error, video lag/stop LCD-TV Version checking method Established date Revised date 2010. 12 .14 A7 1. Checking method for remote controller for adjustment Version Press the IN-START with the remote controller for adjustment Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 67 / 153 LGE Internal Use Only Standard Repair Process Detail Technical Manual LCD TV Error symptom Content A. Video error _Vertical/Horizontal bar, residual image, light spot LCD TV connection diagram (1) Established date Revised date 2010. 12 .14 A8 As the part connecting to the external input, check the screen condition by signal Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 68 / 153 LGE Internal Use Only Standard Repair Process Detail Technical Manual LCD TV Error symptom A. Video error_Video error, video lag/stop Content TUNER checking part Established date Revised date 2010. 12 .14 A9 Checking method: 1. Check the signal strength or check whether the screen is normal when the external device is connected. 2. After measuring each voltage from power supply, finally replace the MAIN BOARD. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 69 / 153 LGE Internal Use Only Standard Repair Process Detail Technical Manual LCD TV Error symptom A. Video error_Color error Content Adjustment Test pattern - ADJ Key Established date Revised date 2010. 12 .14 A12 You can view 6 types of patterns using the ADJ Key Checking item : 1. Defective pixel 2. Residual image 3. MODULE error (ADD-BAR,SCAN BAR..) 4.Video error (Classification of MODULE or Main-B/D!) Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. 70 / 153 Only for training and service purposes LGE Internal Use Only Appendix : Exchange T-Con Board (1) Solder defect, CNT Broken Solder defect, CNT Broken Solder defect, CNT Broken Solder defect, CNT Broken T-Con T-Con Defect, Defect, CNT CNT Broken Broken Solder defect,CNT CNTBroken Broken T-Con Defect, Abnormal Power Section Solder defect, Short/Crack Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes Abnormal Power Section 71 / 153 Solder defect, Short/Crack LGE Internal Use Only Appendix : Exchange T-Con Board (2) Abnormal Power Section Solder defect, Short/Crack GRADATION Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes Abnormal Power Section Solder defect, Short/Crack Fuse Open, Abnormal power section Abnormal Display Noise GRADATION 72 / 153 LGE Internal Use Only Appendix : Exchange PSU(LED driver) No Light Dim Light Dim Light Dim Light No picture/Sound Ok Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 73 / 153 LGE Internal Use Only Appendix : Exchange the Module (1) Panel Mura, Light leakage Crosstalk Panel Mura, Light leakage Press damage Press damage Crosstalk Un-repairable Cases In this case please exchange the module. Press damage Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 74 / 153 LGE Internal Use Only Appendix : Exchange the Module (2) Vertical Block Source TAB IC Defect Horizontal Block Gate TAB IC Defect Vertical Line Source TAB IC Defect Horizontal Block Gate TAB IC Defect Gate TAB IC Defect Vertical Block Source TAB IC Defect Horizontal line Gate TAB IC Defect Gate TAB IC Defect Un-repairable Cases In this case please exchange the module. Horizontal Block Gate TAB IC Defect Gate TAB IC Defect Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 75 / 153 LGE Internal Use Only Standard Repair Process Detail Technical Manual LCD TV Error symptom B. Power error _No power Content Check front display LED Established date Revised date 2010. 12 .14 A17 Front LED control : Menu Æ Option Æ Power Indicator Æ Standby light ON ST-BY condition: Red Power ON condition: white Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 76 / 153 LGE Internal Use Only Standard Repair Process Detail Technical Manual LCD TV Error symptom Content Established date Revised date B. Power error _No power Check power input voltage and ST-BY 5V 2010. 12 .14 A18 For ’10 models, there is no voltage out for st-by purpose. When st-by, only 3.5V is normally on. Check the DC 20V/24V, 12V, 3.5V. 24 Pin (Power Board ↔ Main Board) - 공통 Edge LED Edge LED SMAW200-H24S (YEONHO) 1 Power on 2 24V 3 24V 4 24V 5 GND 6 GND 7 GND 8 GND 9 3.5V 10 3.5V 11 3.5V 12 3.5V 13 GND 14 GND 15 GND 16 GND 17 12V 18 Inverter On/off 19 12V 20 Lamp : A-Dim LED : N.C 21 12V 22 PWM Dim #1 24 Error-out 23 Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes GND/P_DIM2 • Lamp SCANNING Model : PWM Dim #2 77 / 153 LGE Internal Use Only Standard Repair Process Detail Technical Manual LCD TV Error symptom Content Established date Revised date B. Power error _No power Checking method when power is ON 2010. 12 .14 A19 Check “power on” pin is high 24 Pin (Power Board ↔ Main Board) - 공통 SMAW200-H24S (YEONHO) Edge LED Edge LED 1 Power on 2 24V 3 24V 4 24V 5 GND 6 GND 7 GND 8 GND 9 3.5V 10 3.5V 11 3.5V 12 3.5V 13 GND 14 GND 15 GND 16 GND 17 12V 18 Inverter On/off 19 12V 20 Lamp : A-Dim LED : N.C 21 12V 22 PWM Dim #1 24 Error-out 23 Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes GND/P_DIM2 • Lamp SCANNING Model : PWM Dim #2 78 / 153 LGE Internal Use Only Standard Repair Process Detail Technical Manual LCD TV Error symptom Content B. Power error _Off when on, off whiling viewing POWER OFF MODE checking method Established date Revised date 2010. 12 .14 A22 Entry method 1. Press the IN-START button of the remote controller for adjustment 2. Check the entry into adjustment item 3 Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 79 / 153 LGE Internal Use Only Standard Repair Process Detail Technical Manual Error symptom LCD TV Content C. Audio error_No audio/Normal video Checking method in menu when there is no audio Established date Revised date 2010. 12 .14 A24 Checking method 1. Press the MENU button on the remote controller 2. Select the AUDIO function of the Menu 3. Select TV Speaker from Off to On Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 80 / 153 LGE Internal Use Only Standard Repair Process Detail Technical Manual LCD TV Error symptom C. Audio error_No audio/Normal video Content Voltage and speaker checking method when there is no audio Established date Revised date 2010. 12 .14 A25 24 Pin (Power Board ↔ Main Board) - 공통 SMAW200-H24S (YEONHO) ② 1 ② Power on 2 20V (24V) 3 20V (24V) 4 20V (24V) 5 GND 6 GND 7 GND 8 GND 9 3.5V 10 3.5V 11 3.5V 12 3.5V 13 GND 14 GND 15 GND 16 GND 17 12V 18 Inverter On/off 19 12V 20 Lamp : A-Dim LED : N.C 21 12V 22 PWM Dim #1 23 GND/P_DIM2 24 Error-out ① ③ Checking order when there is no audio ① Check the contact condition of or 24V connector of Main Board ② Measure the 24V input voltage supplied from Power Board (If there is no input voltage, remove and check the connector) ③ Connect the tester RX1 to the speaker terminal and if you hear the “Chik Chik” sound when you touch the GND and output terminal, the speaker is normal. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 81 / 153 LGE Internal Use Only Standard Repair Process Detail Technical Manual LCD TV Error symptom D. Function error_ No response in remote controller, key error Content Remote controller operation checking method Established date Revised date 2010. 12 .14 A27 ③ ④ 1 2 3 4 5 6 7 8 9 10 ② P4102 SCL SDA GND KEY1 KEY2 St 3.5V GND RED_LED IR GND ① Checking order 1, 2. Check IR cable condition between IR & Main board. 3. Check the st-by 3.3V on the terminal 6. 4. When checking the Pre-Amp when the power is in ON condition, it is normal when the Analog Tester needle moves slowly, and defective when it does not move at all. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 82 / 153 LGE Internal Use Only Standard Repair Process Detail Technical Manual LCD TV Error symptom D. VCOM Adjustment Content Sequence of the Vcom adjustment Established date Revised date 2010. 12 .14 A28 1. Case ■ LCD module change ■ T-Con board change 2. Equipment ■ Service Remote controller 3. Adjust sequence ■ Press the ‘adj’ key ■ select V-COM ■ As pushing the right or the left button on the remote controller, And find the V-COM value Which is no or minimized the Flicker. (If there is no flicker at default value, Press the exit key and finish the VCOM adjustment.) ■ Push the OK key to store the value. Then the message “Saving OK” is pop. ■ Press the exit key to finish V-COM adjustment. Copyright ⓒ 2012 LG Electronics. Inc. All right reserved. Only for training and service purposes 83 / 153 LGE Internal Use Only
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 129 Tagged PDF : No Create Date : 2012:02:08 09:59:40+09:00 Creator : Adobe InDesign CS4 (6.0) Trapped : False Producer : ilovepdf.com Modify Date : 2018:11:28 06:26:45+01:00EXIF Metadata provided by EXIF.tools