LR And EF Tire Spreaders
User Manual: LR and LR-EF Tire Spreaders
Open the PDF directly: View PDF 
.
Page Count: 12
| Download | |
| Open PDF In Browser | View PDF |
MODEL L/R/EF Sectional Tire Spreader Installation, Operation and Repair Parts Information Branick Industries, Inc. • 4245 Main Avenue • P.O. Box 1937 • Fargo, North Dakota 58103 REV.121709 P/N: 81-0195 TABLE OF CONTENTS _________________________________________________________________ SAFETY INSTRUCTIONS 1 DEFINITIONS 1 INSTALLATION INSTRUCTIONS 2 OPERATING INSTRUCTIONS 2, 3 MAINTENANCE 3 REPAIR PARTS 4, 5, 6 REPAIR PARTS LIST 7,8 WARRANTY 11 SAFETY INSTRUCTIONS _______________________________________________________________ § § § § NEVER allow unauthorized personnel to operate this product. NEVER use this product for anything other than its intended use. THOROUGHLY train new employees in the proper use and care of this product. PROHIBIT unauthorized personnel from being in shop area while this product is in use. DEFINITIONS __________________________________________________________________________ § CAUTION: Indicates a potentially hazardous situation, which if not avoided, may result in damage to property or minor personal injury. § HAZARD: A source of potential injury to a person. § MAINTENANCE: Those actions that preserve the correct and proper conditions under which the machine shall be used. This may include adjustment, replacement of wear items, lubrication and cleaning, but not modifications or repair of damage. § MAY: This word is understood to be permissive. § MUST: This word is understood to be mandatory. § OPERATION: The correct and proper use of the machine as described in this manual. § SAFETY ALERT SYMBOL: A symbol that indicates a potential personal safety hazard. It is composed of an equilateral triangle surrounding an exclamation point. § SHALL: This word is understood to be mandatory. § SHOULD: This word is understood to be advisory. § WARNING: Indicates a potentially hazardous situation, which if not avoided, may result in death or serious personal injury. 1 CAUTION ♦ Before using this product, read and fully understand the operating instructions and all decals on the product. This is necessary to prevent injury to the operator and damage to the product. ♦ This product is intended to be used to spread tire casings for inspection and/or repair only. ♦ Keep fingers and hands clear of all hooks and mechanisms during operation. ♦ Do not use this product if it is visibly worn, distorted or damaged. ♦ Always wear appropriate eye protection. WARNING ♦ Keep feet clear of the tire lift when raising and lowering tire. ♦ All personnel must be clear of the spread arms during operation. INSTALLATION___________________________________________________________________ 1) Unpack and remove unit from shipping carton and pallet. 2) Position the Model L/R/EF on a solid level floor leaving a minimum of 12 inches of clearance from rear and 24 inches of clearance from sides. The L/R/EF should be bolted down using the four holes in bottom of frame. 3) Install a 1/4 NPT quick coupler nipple (not provided) into the air filter (Item 39) located on mounted foot pedal. 4) Connect the shop air line to the quick coupler installed from previous step. 5) Connect the light to any convenient 115V power source. OPERATION______________________________________________________________________ 1) Pull the bead hooks up and away from the center of the machine. . 2) With the tire lift on the floor, roll the tire onto the lift cradle. Steady the tire on the lift as the foot valve is actuated and raise the tire all the way up. The lift will stop when it reaches the full up position. 2 3) Rotate the lift cradle in front of the tread roller and roll the tire onto the machine. Release the foot valve lever and it will return to natural position. 4) Place the bead hooks between the tire beads. The vertical height of the bead hooks are fully adjustable and friction stops maintain the height. 5) Spread the tire as required with the foot valve. The light can be positioned to view any portion of the tire. 6) To rotate the tire while on the spreader, release the air pressure from the spread cylinder and allow the spread hooks to close. Rotate the tire to desired position and again spread to the desired width. Repeat this operation until the tire is inspected. 7) To remove the tire from the machine, release the air pressure from the spread cylinder. As the bead hooks disengage, swing them up and out of the tire. Move the light fixture out of the tire. 8) With the lift cradle in the up position and next to the tread roller, roll the tire onto the lift cradle. Rotate the cradle away from the machine and release the lift foot valve lever. 9) When the lift returns to the floor, roll the tire off the cradle. MAINTENANCE___________________________________________________________________ CAUTION Before servicing machine disconnect air and electric. MONTHLY – Put a few ounces of 10 or 20 weight oil in all cylinders. Lubricate all moving parts (bolts, hinges, rollers, etc.) with a lubricating oil. Pull the cotter pin which attaches the piston out of its socket, rotate the rod a half turn and replace the cotter pin. BI-YEARLY – Grease the zerk fitting found on lift carriage 3 REPAIR PARTS ___________________________________________________________________________ UNIT ASSEMBLY 4 SPREAD CYLINDER PNEUMATICS 5 LIFT CYLINDER PNEUMATICS 6 REPAIR PARTS LIST _________________________________________________________________ ITEM QTY 1 1 2 1 3 2 4 2 5 2 6 4 7 1 8 1 1 9 5 10 1 11 1 12 2 13 2 14 1 15 2 16 2 17 4 18 2 19 4 20 1 21 1 22 2 23 1 24 1 25 1 26 1 27 1 28 1 29 2 30 1 31 3 32 1 33 2 34 2 35 1 36 5 37 6 38 3 39 1 40 2 PART NO. 900-087 104-030 061-189 104-032 281-043 107-087 110-004 376-016 40-0070 028-012 055-145 111-524 028-010 108-008 061-013 028-033 055-154 028-207 950-475 055-023 950-424 950-425 950-427 268-565 149-090 098-037 051-297 041-295 101-296 167-240 028-013 028-280 025-022 028-054 055-021 096-004 096-038 055-160 096-163 932-001 096-107 DESCRIPTION FRAME PIVOT SHAFT SPRING PIN SPRING FRAME SHAFT ROLLER BEARING TENSION SPRING LIGHT FIXTURE ASSEMBLY CFL BULB 5/16-18" X 3/4" HHC SCREW 5/16-18" NYLOCK NUT BRACKET 1/4-20" X 3/4" HHC SCREW 1/4" INTERNAL TOOTH WASHER COTTER PIN 3/8-16 x 2/1/4 HHC SCREW 3/8-16 NYLOCK NUT NYLON TIP SET SCREW HOOK POST ASSEMBLY 5/16-18 TORQUE LOCK NUT FRONT HOOK ASSEMBLY REAR HOOK ASSEMBLY HOOK ARM SPACER TUBE PISTON ROD CYLINDER HEAD PISTON PISTON CUP CUP RETAINER 14MM GASKET 9/16-12 X 1/3/4 HHC SCREW 5/16-18 X 1/2 HHC SCREW CYLINDER 7/16-14 X 1 HHC SCREW 7/16-14 BI-WAY LOCK NUT 1/4 NPT PLUG 1/4 NPT STREET ELBOW NYLON HEX LOCK NUT 1/4 NPT X 3/8 CONNECTOR FITTING IN-LINE FILTER PIPE COUPLING FITTING 7 ITEM 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 QTY 4 2 2 2 2 4 1 3 1 1 2 1 1 1 1 2 1 1 1 1 1 1 PART NO. 096-162 885-035 190-277 028-010 835-022 028-390 950-329 50-0126 822-004 028-132 108-013 098-091 826-006 096-008 028-239 044-006 051-014 446-074 149-216 098-026 061-050 489-030 DESCRIPTION 1/4 NPT NIPPLE FITTING 1/4 NPT MUFFLER 3 WAY TREADLE VALVE 1/4-20 X 3/4 HHC SCREW FOOT PEDAL GUARD 1/4 X 1/1/4 FHM SCREW CYLINDER ASSEMBLY 5/16-18 X 5/8 BTN HD SCREW LIFT CYLINDER COLLAR 1/4-20 X 1/2 HHC SCREW WASHER VINYL CAP PROCTECTOR CRADLE ASSEMBLY ZERK FITTING 9/16-12 X 1/1/4 HHC SCREW 2" PISTON RING 2" LIFT PISTON CYLINDER SLEEVE PISTON ROD CYLINDER CAP SPRING PIN PISTON ROD COLLAR 8 Notes: 9 Notes: 10 COMMERCIAL WARRANTY This product is warranted by BRANICK INDUSTRIES, INC. to the original user-owner against defective materials or workmanship for a period of one year from the date of delivery. During the warranty period, product found to be defective will be repaired or replaced at, BRANICK INDUSTRIES, INC.'s option, without charge. The product must be returned, with prior approval, transportation charges prepaid and with proof of original delivery date, to BRANICK INDUSTRIES, INC., 4245 Main Ave., Fargo, North Dakota 58107. The repaired or replacement product will be returned with transportation charges prepaid by Branick. This warranty does not cover defects in the product caused by ordinary wear and tear, abuse, misuse, overloading, accident (including shipping damage), improper maintenance, alteration, or any other cause not the result of defective materials or workmanship. REPAIR OF REPLACEMENT IS THE EXCLUSIVE REMEDY FOR DEFECTIVE PRODUCT UNDER THIS WARRANTY. THIS W ARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OF THIS PRODUCT. BRANICK INDUSTRIES, INC. SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES. BRANICK INDUSTRIES, INC. reserves the right to make changes in the design or construction of our products without obligation to incorporate such changes in products already sold and without notice. Service parts, warranty, and regular repair service for products are available from Branick authorized distributors or from: BRANICK INDUSTRIES, INC. 4245 Main Ave. Box 1937 Fargo, North Dakota 58107 701/281-8888 © Copyright 2011 by Branick Industries, Inc. Printed in U.S.A. 11
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : No Page Count : 12 Producer : GEngine PDF Component v1.0 (c) gotomaxx GmbH Create Date : 2011:01:07 10:32:53EXIF Metadata provided by EXIF.tools