LSC 24 Servo Controller User Manual

LSC-24%20Servo%20Controller%20User%20Manual

User Manual:

Open the PDF directly: View PDF PDF .
Page Count: 19

Scroll down to view the document on your mobile browser.

Ad

Introduction to the PC software interface
Advanced Control(Serial Port Communication，Seconda

1LSC-24 Servo ControllerUser Manual

2Warm TipsThank you for purchasing this item. For your better use, please read thefollowing instructions first.1.All servo interfaces of this LSC-24 servo controller have over-currentprotection which is already shown in the picture below.2.Please first fix nylon column or copper column on the servo controller toprevent it from burning out during the debugging process, because mistakeshappen much more easily if the bottom of the controller touches the metalobjects.3.Please connect the positive and negative wires to the servo controller firstbefore you connect battery to the servo controller, and then connect the batteryto the wire interface, and finally turn on the switch, it is worth noting thatpositive and negative wires contacting can cause a short circuit. Do not exposethe wire out of the controller when it is wired.4.If the servo controller is not connected to the power supply and only USB,the buzzer will make sound of beep(DIDI), so be sure to connect the wire to thepower supply.5.The servo controller module is not intended for young children! Youngerusers should use this module only under adult supervision.

Navigation menu