M9217A PXIe Isolated Digitizer 2_channels 16 Bit ±256 V 32 Msa_Ch Memory Data Sheet Brochure

User Manual: M9217A-PXIe-Isolated-Digitizer-2_channels-16-bit-±256-V-32-Msa_Ch-memory-Data-Sheet-Brochure

Open the PDF directly: View PDF .
Page Count: 8

Keysight M9217A

PXIe Single-Slot 2-Channel Isolated Digitizer

Data Sheet

Introduction

The Keysight Technologies, Inc. M9217A is a PXI Express based, single-slot 2-channel, isolated

digitizer that supports up to ±256 V input voltage at 20 MSa/s sampling rate with 16-bit resolution.

With its built-in peak voltage protection of up to 400 V, the M9217A is ideal for analyzing high-voltage

and transient signals as seen in automotive, mechatronics and aerospace defense applications.

Key Features

– ±256 V input voltage

– 2-channel isolated, with ADCs per channel, simultaneously sampled channels

– 20 MSa/s sampling rate at 16-bit resolution

– Built-in 400 V peak voltage protection

– Single PXI express slot

– PXI trigger types supported: PXI TTL / trigger and PXI Star trigger

– IVI-COM, IVI-C, LabVIEW G drivers

03 | Keysight | M9217A PXIe Single-Slot 2-Channel Isolated Digitizer - Data Sheet

±256 V input voltage

Input channels with the ability to measure waveforms up to 256 V are ideal for analyzing

high-voltage and transient signals as seen in automotive and aerospace defense

applications. Most oscilloscopes and PXI digitizers have a maximum input range less

than 40 Vpk. This also reduces the need to add expensive input signal attenuation and

signal conditioning circuitry, saving test development time and money.

2-channel isolated, with ADCs per channel

In addition, since the ±256 V input voltage range is combined with 16-bit analog-to-

digital converters (ADCs), the isolated front-end and low input offset allows voltages

from as low as 250 mV to as high as 256 V to be measured simultaneously.

The M9217A’s individually isolated 2-channel inputs have been designed for high

performance with an A/D converter per channel to ensure the signals you measure

are accurately digitized without distortion or additional noise. Channel input range is

congurable from ±250 mV up to ±256 V, with a oating voltage up to ±40 V to accom-

modate differential waveform acquisition.

20 MSa/s sampling rate at 16-Bit resolution

The M9217A’s ability to support up to 20 MSa/s sampling rate at 16-bit resolution

enables sampling of transient waveforms like injector waveforms (Figure 1).

toff Vpk

tpw

Ringing

Vdson

ton

ton < 0.1 us

Vdson ~ 600 mV - 800 mV

toff ~ 10 us

Vpk ~ 70 V - 146 V

200 V (peak)

Figure 1. Sample injector waveform

04 | Keysight | M9217A PXIe Single-Slot 2-Channel Isolated Digitizer - Data Sheet

Built-in 400 V peak voltage protection

To support high voltage and transient signals in automotive, mechatronics and aerospace

and defense applications, the M9217A has a built-in peak voltage protection against

overvoltage spikes of up to 400 V.

32 MSa/channel with up to 1024 segmented memory

Coupled with the memory segmentation feature of up to 1024 records, the M9217A’s

32M sample memory size enables multiple bursts of data to be digitized without the

need for re-initialization between bursts. The record size is congured by selecting the

total number of samples, including pre-trigger samples.

Support for multiple trigger types

The M9217A supports different trigger types like PXI trigger bus, PXI Star, external input/

output, channel and software trigger. Congurable trigger delay and trigger hold-off

allow you to better dene where record data is collected relative to the trigger event.

The congurable trigger delay feature allows precise positioning of acquisition relative to

the trigger event, while the trigger hold-off feature helps avoid false triggers.

The PXI TTL trigger output enables the M9217A digitizer to synchronize to other devices.

Multiple M9217A digitizers can be synchronized for higher channel count.

IO Libraries

Keysight input/output or IO Libraries Suite offers fast and easy connection to instru-

ments. The latest suite version extends that capability to include modular instruments.

New support for PXI such as the Keysight IO Libraries Suite helps you display all of

the modules in your system. From here, you can view information about the installed

software or start the soft front panel of the module. Launch the soft front panel of the

module directly from Keysight Connection Expert. Figure 2 shows the M9217A soft front

panel.

Figure 2. M9217A soft front panel

05 | Keysight | M9217A PXIe Single-Slot 2-Channel Isolated Digitizer - Data Sheet

Drivers

The M9217A digitizer is supplied with a comprehensive portfolio of module drivers, doc-

umentation, examples, and software tools to help you quickly develop test systems with

your software platform of choice. The module comes with IVICOM, IVI-C, and LabVIEW

G software drivers that work in the most popular test and measurement development

environments, including LabVIEW and LabWindows/CVI from National Instruments,

Microsoft C/C++, C#, and VB.NET.

Easy software integration

The module software support provides context-sensitive help, complete documentation

and code examples that allow a quick module set up and basic acquisition functionalities.

These code examples can be easily modied, so that the card can be quickly integrated

into a test system. Included are application code examples for LabVIEW, LabWindows/

CVI, Visual Studio C, C++, and C# and Visual Basic.

Calibration Intervals

The M9217A is factory-calibrated and shipped with a calibration certicate. Calibration is

recommended every year in order to verify product performance.

M9217A specications

2-channel isolated digitizer with ADCs per channel and utilizing one PXI express slot.

Max sample rate 20 MSa/s

Sample resolution 16 bits

Input conguration Isolated inputs ( each channel independently isolated)

Isolation voltage (low to chassis) +40 V

Maximum input range (high to low) +256 Vpk

Input impedance 1 MW // 40 pF

Input coupling DC or AC

AC cutoff frequency < 10 Hz

Input ranges ±256 V, ±128 V, ±64 V, ±32 V, ±16 V, ±8 V,

±4V, ±2 V, ±1 V, ±500 mV, ±250 mV

Over voltage protection Yes

Maximum overvoltage protection ±400 Vppk

Analog bandwidth (-3 dB) 20 MHz typical

06 | Keysight | M9217A PXIe Single-Slot 2-Channel Isolated Digitizer - Data Sheet

Trigger

Each trigger event causes acquisition of data into a single record at the congured sample rate. The

number of data records is congurable from 1 to 1024.

Source Description

Immediate Trigger at initiation of acquisition,

External SMD connector, TTL input edge (rising edge)

PXI_Trig[0:7], PXI_STAR PXI connector XJ4 , TTL input edge (rising edge)

DSTARB PXIe connector XJ3, TTL input edge (rising edge)

Software Instrument command

Channel/edge Selectable level, rising/falling, hysteresis.

Channel/window Selectable high and low levels, leaving/entering.

Sampling

Programmable sample rates 1 kSa/s, 2 kSa/s, 5 kSa/s, 10 kSa/s, 50 kSa/s, 100 kSa/s, 200 kSa/s,

500 kSa/s, 1 MSa/s, 2 MSa/s, 5 MSa/s, 10 MSa/s, 20 MSa/s

External event output Trigger

Output signal TTL ( rising edge )

Impedance 25 or 50 Ω

Pulse width 1 µs

Trigger modes

Record length 2 to 32 million samples

Pre trigger 0 to record length -1

Post trigger Record length-pre-trigger

Timestamp triggered event Continuous running timestamp

Timestamp resolution 10 ns

Trigger delay 0 – 3600 s with 50 ns resolution

Trigger hold-off 0 – 10 s with 50 ns resolution

Trigger latency150 ns

1. Latency between edge trigger detection and rst trigger sample.

Accuracy

DC accuracy

Total specication (% of reading + % of range)

23 °C ±5%

Range ±% of reading ±% of range

250 mV 0.1 0.3

500 mV 0.1 0.2

1 V, 2 V 0.1 0.12

4 V, 64 V 0.1 0.3

8 V, 128 V 0.1 0.2

16 V, 32 V, 256 V 0.1 0.12

100,000 reading average @ 1 MSa/s

Integral nonlinearity ±5 LSB

Differential nonlinearity ±1 LSB

07 | Keysight | M9217A PXIe Single-Slot 2-Channel Isolated Digitizer - Data Sheet

Dynamic characteristic (typical)

Source SFDR dBc THD dBc

250 mV 71 79

500 mV 77 83

1 V 81 85

2 V 85 82

4 V 70 80

Noise power ( typical)

Range Noise voltage1

Vrms

Equivalent2

S/N dB

250 mV 0.5 mV 51

0.5 mV 0.55 mV 55

1 V 0.6 mV 60

2 V 0.9 mV 63

4 V 4 mV 56

8 V 6.5 mV 58

16 V 8.5 mV 61

32 V 11 mV 65

64 V 60 mV 56

128 V 94 mV 58

256 V 120 mV 62

1. 50 Ω source resistance.

2. For -1 dB of full scale range

AC atness (DC-4 MHz) typical

250 mV, 500 mV,

1 V, 2 V

< 0.3 dB relative to 20 kHz

4 V, 8 V, 16 V, 32 V < 0.5 dB relative to 20 kHz

128 V < 1.2 dB relative to 20 kHz

Waveform memory

Data memory standard132 Msa/ch

Random access to readings in multiple record mode Capture multiple records from single trigger

source

1. Nominal values. Specic sample max is 30,000,000

Waveform measurements

Voltage Peak-to-peak, Minimum, Maximum, High (Top), Low (Base), Amplitude, RMS,

Cycle RMS, Average, Cycle Average, Overshoot, Preshoot

Time Rise, Fall, Frequency, Period, Positive Width, Negative Width, Positive Duty

Cycle, Negative Duty Cycle

Utilities

Calibration cycle 1 year

Measured for input of 1 Mhz

08 | Keysight | M9217A PXIe Single-Slot 2-Channel Isolated Digitizer - Data Sheet

This information is subject to change without notice.

© Keysight Technologies, 2017

Published in USA, December 1, 2017

5992-0815EN

www.keysight.com

www.keysight.com/nd/automotive

For more information on Keysight

Technologies’ products, applications or

services, please contact your local Keysight

office. The complete list is available at:

www.keysight.com/find/contactus

Americas

Canada (877) 894 4414

Brazil 55 11 3351 7010

Mexico 001 800 254 2440

United States (800) 829 4444

Asia Pacic

Australia 1 800 629 485

China 800 810 0189

Hong Kong 800 938 693

India 1 800 11 2626

Japan 0120 (421) 345

Korea 080 769 0800

Malaysia 1 800 888 848

Singapore 1 800 375 8100

Taiwan 0800 047 866

Other AP Countries (65) 6375 8100

Europe & Middle East

Austria 0800 001122

Belgium 0800 58580

Finland 0800 523252

France 0805 980333

Germany 0800 6270999

Ireland 1800 832700

Israel 1 809 343051

Italy 800 599100

Luxembourg +32 800 58580

Netherlands 0800 0233200

Russia 8800 5009286

Spain 800 000154

Sweden 0200 882255

Switzerland 0800 805353

Opt. 1 (DE)

Opt. 2 (FR)

Opt. 3 (IT)

United Kingdom 0800 0260637

For other unlisted countries:

www.keysight.com/find/contactus

(BP-9-7-17)

DEKRA Certified

ISO9001 Quality Management System

www.keysight.com/go/quality

Keysight Technologies, Inc.

DEKRA Certified ISO 9001:2015

Quality Management System

Evolving Since 1939

Our unique combination of hardware, software, services, and people can help you

reach your next breakthrough. We are unlocking the future of technology.

From Hewlett-Packard to Agilent to Keysight.

myKeysight

www.keysight.com/find/mykeysight

A personalized view into the information most relevant to you.

www.keysight.com/find/emt_product_registration

Register your products to get up-to-date product information and

find warranty information.

Keysight Services

www.keysight.com/find/service

Keysight Services can help from acquisition to renewal across your

instrument’s lifecycle. Our comprehensive service offerings—one-

stop calibration, repair, asset management, technology refresh,

consulting, training and more—helps you improve product quality

and lower costs.

Keysight Assurance Plans

www.keysight.com/find/AssurancePlans

Up to ten years of protection and no budgetary surprises to ensure

your instruments are operating to specification, so you can rely on

accurate measurements.

Keysight Channel Partners

www.keysight.com/find/channelpartners

Get the best of both worlds: Keysight’s measurement expertise and

product breadth, combined with channel partner convenience.