MD14F12 Toshiba Service Manual
User Manual: MD14F12
Open the PDF directly: View PDF 
.
Page Count: 69
| Download | |
| Open PDF In Browser | View PDF |
FILE NO. 140-200606GR (MFR’S VERSION A) SERVICE MANUAL COLOR TELEVISION/ DVD VIDEO PLAYER MD14F12 The above model is classified as a green product (*1), as indicated by the underlined serial number. This Service Manual describes replacement parts for the green product. When repairing this green product, use the part(s) described in this manual and lead-free solder (*2). For (*1) and (*2), see the next page. DOCUMENT CREATED IN JAPAN, February, 2006 GREEN (*1) GREEN PRODUCT PROCUREMENT The EC is actively promoting the WEEE & RoHS Directives that define standards for recycling and reuse of Waste Electrical and Electronic Equipment and for the Restriction of the use of certain Hazardous Substances. From July 1, 2006, the RoHS Directive will prohibit any marketing of new products containing the restricted substances. Increasing attention is given to issues related to the global environmental. Toshiba Corporation recognizes environmental protection as a key management tasks, and is doing its utmost to enhance and improve the quality and scope of its environmental activities. In line with this, Toshiba proactively promotes Green Procurement, and seeks to purchase and use products, parts and materials that have low environmental impacts. Green procurement of parts is not only confined to manufacture. The same green parts used in manufacture must also be used as replacement parts. (*2) LEAD-FREE SOLDER This product is manufactured using lead-free solder as a part of a movement within the consumer products industry at large to be environmentally responsible. Lead-free solder must be used in the servicing and repair of this product. WARNING This product is manufactured using lead free solder. DO NOT USE LEAD BASED SOLDER TO REPAIR THIS PRODUCT ! The melting temperature of lead-free solder is higher than that of leaded solder by 86°F to 104°F (30°C to 40°C). Use of a soldering iron designed for lead-based solders to repair product made with lead-free solder may result in damage to the component and or PCB being soldered. Great care should be made to ensure high-quality soldering when servicing this product especially when soldering large components, through-hole pins, and on PCBs as the level of heat required to melt lead-free solder is high. A1-1 CAUTION THIS DIGITAL VIDEO PLAYER EMPLOYS A LASER SYSTEM. TO ENSURE PROPER USE OF THIS PRODUCT, PLEASE READ THIS SERVICE MANUAL CAREFULLY AND RETAIN FOR FUTURE REFERENCE. SHOULD THE UNIT REQUIRE MAINTENANCE, CONTACT AN AUTHORIZED SERVICE LOCATION-SEE SERVICE PROCEDURE. USE OF CONTROLS, ADJUSTMENTS OR THE PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. TO PREVENT DIRECT EXPOSURE TO LASER BEAM, DO NOT TRY TO OPEN THE ENCLOSURE. VISIBLE LASER RADIATION MAY BE PRESENT WHEN THE ENCLOSURE IS OPENED. DO NOT STARE INTO BEAM. Location of the required Marking The rating sheet and the safety caution are on the rear of the unit. CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J. PREPARATION OF SERVICING The laser diode used for a pickup head may be destroyed with external static electricity. Moreover, even if it is operating normally after repair, when static electricity discharge is received at the time of repair, the life of the product may be shortened. Please perform the following measure against static electricity, be careful of destruction of a laser diode at the time of repair. • Place the unit on a workstation equipped to protect against static electricity, such as conductive mat. • Soldering iron with ground wire or ceramic type is used. • A worker needs to use a ground conductive wrist strap for body. A1-2 SERVICING NOTICES ON CHECKING 1. KEEP THE NOTICES 6. AVOID AN X-RAY As for the places which need special attentions, they are indicated with the labels or seals on the cabinet, chassis and parts. Make sure to keep the indications and notices in the operation manual. 2. AVOID AN ELECTRIC SHOCK There is a high voltage part inside. Avoid an electric shock while the electric current is flowing. 3. USE THE DESIGNATED PARTS The parts in this equipment have the specific characters of incombustibility and withstand voltage for safety. Therefore, the part which is replaced should be used the part which has the same character. Especially as to the important parts for safety which is indicated in the circuit diagram or the table of parts as a mark, the designated parts must be used. 4. PUT PARTS AND WIRES IN THE ORIGINAL POSITION AFTER ASSEMBLING OR WIRING Safety is secured against an X-ray by considering about the cathode-ray tube and the high voltage peripheral circuit, etc. Therefore, when repairing the high voltage peripheral circuit, use the designated parts and make sure not modify the circuit. Repairing except indicates causes rising of high voltage, and it emits an X-ray from the cathoderay tube. 7. PERFORM A SAFETY CHECK AFTER SERVICING Confirm that the screws, parts and wiring which were removed in order to service are put in the original positions, or whether there are the portions which are deteriorated around the serviced places serviced or not. Check the insulation between the antenna terminal or external metal and the AC cord plug blades. And be sure the safety of that. (INSULATION CHECK PROCEDURE) There are parts which use the insulation material such as a tube or tape for safety, or which are assembled in the condition that these do not contact with the printed board. The inside wiring is designed not to get closer to the pyrogenic parts and high voltage parts. Therefore, put these parts in the original positions. 5. TAKE CARE TO DEAL WITH THE CATHODE-RAY TUBE 1. Unplug the plug from the AC outlet. 2. Remove the antenna terminal on TV and turn on the TV. 3. Insulation resistance between the cord plug terminals and the eternal exposure metal [Note 2] should be more than 1M ohm by using the 500V insulation resistance meter [Note 1]. 4. If the insulation resistance is less than 1M ohm, the inspection repair should be required. [Note 1] In the condition that an explosion-proof cathoderay tube is set in this equipment, safety is secured against implosion. However, when removing it or serving from backward, it is dangerous to give a shock. Take enough care to deal with it. If you have not the 500V insulation resistance meter, use a Tester. [Note 2] External exposure metal: Antenna terminal HOW TO ORDER PARTS Please include the following informations when you order parts. (Particularly the VERSION LETTER.) 1. MODEL NUMBER and VERSION LETTER The MODEL NUMBER can be found on the back of each product and the VERSION LETTER can be found at the end of the SERIAL NUMBER. 2. PART NO. and DESCRIPTION You can find it in your SERVICE MANUAL. A1-3 IMPORTANT SAFEGUARDS 1. 2. 3. 4. 5. 6. 7. 8. 8A. 9. 10. 11. 12. 13. 14. 15. 16. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. RETAIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. HEED WARNINGS All warnings on the unit and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS All operating and use instructions should be followed. CLEANING Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. ATTACHMENTS Do not use attachments not recommended by the unit’s manufacturer as they may cause hazards. WATER AND MOISTURE Do not use this unit near water. For example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool. PORTABLE CART WARNING ACCESSORIES (symbol provided by RETAC) Do not place this unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury, and serious damage to the unit. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. S3126A VENTILATION Slots and openings in the cabinet and in the back or bottom are provided for ventilation, to ensure reliable operation of the unit, and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. This unit should never be placed near or over a radiator or heat source. This unit should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. POWER SOURCES This unit should be operated only from the type of power source indicated on the rating plate. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For units intended to operate from battery power, or other sources, refer to the operating instructions. GROUNDING OR POLARIZATION This unit is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. If your unit is equipped with a 3-wire grounding-type plug, a plug having a third (grounding) pin, this plug will only fit into a grounding-type power outlet. This too, is a safety feature. If you are unable to insert the plug into the outlet, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the grounding-type plug. POWER-CORD PROTECTION Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. LIGHTNING To protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges. POWER LINES An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with them might be fatal. OVERLOADING Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock. OBJECT AND LIQUID ENTRY Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit. A1-4 IMPORTANT SAFEGUARDS (CONTINUED) 17. OUTDOOR ANTENNA GROUNDING If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. 18. SERVICING Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19. DAMAGE REQUIRING SERVICE Unplug this unit from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the unit. c. If the unit has been exposed to rain or water. d. If the unit does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the unit to its normal operation. e. If the unit has been dropped or the cabinet has been damaged. f. When the unit exhibits a distinct change in performance, this indicates a need for service. 20. REPLACEMENT PARTS When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original parts. Unauthorized substitutions may result in fire, electric shock or other hazards. 21. SAFETY CHECK Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition. 22. WALL OR CEILING MOUNTING The product should be mounted to a wall or ceiling only as recommended by the manufacturer. 23. HEAT The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. 24. DISC TRAY Keep your fingers well clear of the disc tray as it is closing. It may cause serious personal injury. 25. CONNECTING When you connect the product to other equipment, turn off the power and unplug all of the equipment from the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's manual of the other equipment carefully and follow the instructions when making any connections. 26. SOUND VOLUME Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume sound may cause hearing or speaker damage. 27. SOUND DISTORTION Do not allow the product output distorted sound for a longtime. It may cause speaker overheating and fire. 28. HEADPHONES When you use the headphones, keep the volume at a moderate level. If you use the headphones continuously with high volume sound, it may cause hearing damage. 29. LASER BEAM Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage. 30. DISC Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious personal injury and product malfunction. 31. NOTE TO CATV SYSTEM INSTALLER This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical. A1-5 IMPORTANT SAFEGUARDS (CONTINUED) EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE ANTENNA LEAD IN WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) NEC-NATIONAL ELECTRICAL CODE S2898A A1-6 WHEN REPLACING DVD DECK [ When removing the DVD Deck ] Before removing Pick Up PCB and DVD PCB connector, the short circuit the position shown in Fig. 1 using a soldering iron. If you remove the DVD Deck with no soldering, the Laser may be damaged. [ When installing the DVD Deck ] Remove all the soldering on the short circuit position after the connection of Pick Up PCB and DVD PCB connector. NOTE • Before your operation, please read “PREPARATION OF SERVICING”. • Use the Lead Free solder. • Manual soldering conditions • Soldering temperature: 350 ± 5˚C • Soldering time: Within 2 seconds • Soldering combination: Sn-3.0Ag-0.5Cu • When Soldering/Removing of solder, use the draw in equipment over the Pick Up Unit to keep the Flux smoke away from it. Pick Up PCB Short circuit using a soldering iron. Fig. 1 DISC REMOVAL METHOD AT NO POWER SUPPLY 1. Remove the Back Cabinet and AV PCB/DVD Block. (Refer to item 1 of the DISASSEMBLY INSTRUCTIONS.) 2. Rotate the Main Gear in the direction of the arrow by hand. (Refer to Fig. 1) 3. Manually open the Tray. Main Gear Deck CD Fig. 1 A1-7 PARENTAL CONTROL - RATING LEVEL 4 DIGIT PASSWORD CANCELLATION If the stored 4 digit password in the Rating Level menu needs to be cancelled, please follow the steps below. 1. 2. 3. 4. 5. 6. 7. 8. Turn Unit ON. Set the DVD Mode. Confirm that the 'No Disc' will be appeared on the screen. Press and hold the '7' key on the remote control unit. Simultaneously press and hold the 'STOP' key on the front panel. Hold both keys for more than 3 seconds. The On Screen Display message 'PASSWORD CLEAR' will appear. The 4 digit password has now been cleared TRAY LOCK Tray cannot be opened by setting the Tray Lock, please follow the steps below. 1. 2. 3. 4. 5. Turn Unit ON. Set the DVD to the Stop Mode. Press it in order of 'SETUP', 'SUBTITLE', '3', 'AUDIO SELECT' and '0' key of a remote control unit. The On Screen Display message ' ' will appear. The Tray Lock has now been set up. To unlock the Tray Lock, please follow the steps below. 1. 2. 3. 4. 5. Turn Unit ON. Set the DVD to the Stop Mode. Press it in order of 'SETUP', 'SUBTITLE', '3', 'AUDIO SELECT' and '0' key of a remote control unit. The On Screen Display message ' ' will appear. The Tray Lock has now been cleared. A1-8 TABLE OF CONTENTS GREEN PRODUCT PROCUREMENT ....................................................................................... LEAD-FREE SOLDER ................................................................................................................ CAUTION .................................................................................................................................... SERVICING NOTICES ON CHECKING ..................................................................................... HOW TO ORDER PARTS .......................................................................................................... IMPORTANT SAFEGUARDS ..................................................................................................... WHEN REPLACING DVD DECK ............................................................................................... DISC REMOVAL METHOD AT NO POWER SUPPLY ............................................................. PARENTAL CONTROL-RATING LEVEL .................................................................................. TRAY LOCK ................................................................................................................................ TABLE OF CONTENTS .............................................................................................................. GENERAL SPECIFICATIONS ................................................................................................... DISASSEMBLY INSTRUCTIONS 1. REMOVAL OF MECHANICAL PARTS AND P. C. BOARDS ............................................ 2. REMOVAL OF DVD DECK PARTS ................................................................................... 3. REMOVAL OF ANODE CAP .............................................................................................. 4. REMOVAL AND INSTALLATION OF FLAT PACKAGE IC ............................................... SERVICE MODE LIST ................................................................................................................ WHEN REPLACING EEPROM (MEMORY) IC .......................................................................... ELECTRICAL ADJUSTMENTS .................................................................................................. BLOCK DIAGRAMS DVD .......................................................................................................................................... TV ............................................................................................................................................ POWER .................................................................................................................................. PRINTED CIRCUIT BOARDS DVD .......................................................................................................................................... AV/CRT .................................................................................................................................... LOADING MOTOR/SW ........................................................................................................... SCHEMATIC DIAGRAMS MPEG/MICON/DSP ................................................................................................................. MEMORY ................................................................................................................................. MOTOR DRIVE ....................................................................................................................... AUDIO/VIDEO ......................................................................................................................... REGULATOR ........................................................................................................................... MICON/TUNER ....................................................................................................................... SOUND AMP ........................................................................................................................... IN/OUT ..................................................................................................................................... DEFLECTION .......................................................................................................................... CRT .......................................................................................................................................... POWER ................................................................................................................................... CHROMA ................................................................................................................................. STEREO .................................................................................................................................. LOADING MOTOR/SW ........................................................................................................... INTERCONNECTION DIAGRAM ............................................................................................... WAVEFORMS ............................................................................................................................. MECHANICAL EXPLODED VIEWS ........................................................................................... DVD DECK EXPLODED VIEW ................................................................................................... MECHANICAL REPLACEMENT PARTS LIST ......................................................................... DVD DECK REPLACEMENT PARTS LIST ............................................................................... ELECTRICAL REPLACEMENT PARTS LIST ........................................................................... A2-1 A1-1 A1-1 A1-2 A1-3 A1-3 A1-4~A1-6 A1-7 A1-7 A1-8 A1-8 A2-1 A3-1~A3-6 B1-1, B1-2 B2-1~B2-4 B3-1 B4-1, B4-2 C-1 C-1, C-2 D-1~D-6 E-1, E-2 E-3, E-4 E-5, E-6 F-1, F-2 F-3~F-6 F-7, F-8 G-1, G-2 G-3, G-4 G-5, G-6 G-7, G-8 G-9, G-10 G-11, G-12 G-13, G-14 G-15, G-16 G-17, G-18 G-19, G-20 G-21, G-22 G-23, G-24 G-25, G-26 G-27, G-28 G-29, G-30 H-1~H-3 I1-1~I1-3 I2-1 J1-1 J2-1 J3-1~J3-4 GENERAL SPECIFICATIONS G-1 TV System CRT CRT Size / Visual Size CRT Type Magnetic Field BV/BH Color System Speaker Sound Output G-2 DVD System Position Size Impedance Max 10%(Typical) Color System Disc Disc Diameter Drive Search speed Fwd Actual Rev Actual Slow speed Actual Actual G-3 Tuning System Broadcasting System Tuner and Receive CH Intermediate Frequency G-4 Signal Preset CH Stereo/Dual TV Sound Tuner Sound Muting Video Signal RGB Signal Audio Signal G-5 Power Power Source Power Consumption Protector G-6 Regulation G-7 Temperature G-8 Operating Humidity System Destination CH Coverage Picture(FP) Sound(FS) FP-FS Input Level Output Level S/N Ratio (Weighted) Horizontal Resolution at DVD Mode Output Level Input Level Output Level Digital Output Level S/N Ratio at DVD (Weighted) Harmonic Distortion Frequency Response : at DVD at Video CD at SVCD at CD AC DC at AC at DC Stand by (at AC) Per Year Power Fuse Safety Circuit IC Protector(Micro Fuse) Dew Sensor Safety Radiation X-Radiation Laser Operation Storage A3-1 14 inch / 357.0 mmV Flat +0.45G / 0.18G NTSC 2 Speaker Front 1.5 x 2.7 inch 8 ohm 1.0W + 1.0W __ NTSC DVD, CD-DA, CD-R/RW, Video CD DVD-R/RW (Video Format Only) 120 mm , 80 mm DM3SA 4 step 2-120 times(DVD, VIDEO CD) 4-40 times (CD) 4 step 2-120 times(DVD, VIDEO CD) 4-40 times (CD) Fwd 1/7 - 1/2 times -Rev --US System M 1Tuner US(w/CABLE) 2~69, 4A, A-5~A-1, A~I, J~W, W+1~W+84 45.75MHz 41.25MHz 4.50MHz No US-Stereo Yes 1 V p-p/75 ohm ------8.0dBm/50k ohm -0.5 V p-p/75 ohm ------120V, 60Hz -90W at 120V 60Hz -3W at 120V 60Hz -- kWh/Year Yes Yes No No UL FCC DHHS DHHS +5oC ~ +40oC -20oC ~ +60oC Less than 80% RH GENERAL SPECIFICATIONS G-9 On Screen Display Menu(TV) Menu Type TV Setup Picture Audio Picture Preference Channel Setup TV/CABLE Auto CH Memory Add/ Delete V-chip Setup Language Sleep Timer CH / AV(LINE) / DVD Stereo/Audio Output Bilingual SAP Control Level Yes Icon Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Volume Brightness / Contrast / Sharpness / Color Tint Bass/Treble/Balance Caption / Text Auto Search/Position Game Mute Yes Yes Yes Yes No Yes No Yes Yes A3-2 GENERAL SPECIFICATIONS G-10 On Screen Display Menu (DVD) Menu Type Language Menu Subtitle Audio OSD Language(Set up Language) Video Audio DRC (Dynamic Range Control) Dialogue (On DRC[TV] / Off DRC[Std]) Surround System Open Close No disc Reading Play Still/Pause Stop Prohibit Mark PBC Step Skip(>>|) Skip(|<<) Random Repeat Slow+ SlowSearch+ SearchJump Resume Title No. Chapter No. Track No. Time Sub Title No. Angle No. Vocal On/Off Audio No. Audio Stereo L/R Zoom Marker No. Program Play Back Surround On/Off Screen Saver JPEG Sleep Timer No Yes Yes Yes No No Yes Yes No No Yes Disc/Card Slot Password Lock/ Un Lock Parental Select Files HDMI (480p/1080i/720p) Output OSD Language Clock and Timer No Yes E.B.L. (Enhanced Black Level) TV Screen Size(4:3) OSD Display On/Off Picture Mode (Video/Film/Auto) JPEG Interval Screen Saver G-11 G-12 Yes Icon Yes Yes Yes Yes No Yes Yes No No No Folder Name File Name File No Time Track No Max Time Step Program(On Timer / Off Timer) On/Off Timer Wake Up Timer Timer Back-up (at Power Off Mode) more than A3-3 Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes (CD, VIDEO CD) Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes (Video CD) Yes Yes Yes (CD, VIDEO CD) No No No No No No No English, French, Spanish 120 Min 10 Min No No -Min Sec GENERAL SPECIFICATIONS G-13 Remote Control Unit Glow in Dark Remocon Remocon Format Format Custom Code Power Source Total Keys Keys RC-MG Voltage(D.C) UM size x pcs Power 1 2 3 4 5 6 7 8 9 0 Play Stop Search+ SearchClosed Caption/Skip+ Quick View(CH RTN)/SkipSlow+ SlowPause/Still/Step DISPLAY TV/DVD Cancel Audio Select Angle Subtitle Top Menu Menu DVD Menu Return CH Up CH Down Vol Down Vol Up Up/ Set+ Down/ SetLeft/SelectRight/Select+ Enter Play Mode Input Select/Zoom Repeat A-B Mute Open/Close Sleep Marker Jump Game A3-4 No TOSHIBA TOSHIBA 40-BF H, 44-BB H, 45-BA H, 45-BC H 3V UM-4 x 2 pcs 47 Key Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes GENERAL SPECIFICATIONS G-14 Features (TV) Features (DVD) CABLE Auto Shut Off Auto Setup Auto CH Memory V-Chip Auto Search SAP Game Position FM Transmitter Energy Star Closed Caption Comb Filter Protect of FBT Leak Circuit Picture Preference Choke Coil Power On Memory Tray Lock Video CD Playback SVCD Playback MP3 Playback WMA Playback JPEG Playback Digital Out Down Mix Out G-15 Accessories 3D Surround Screen Saver Closed Caption Audio DAC Owner's Manual USA V-chip CANADA V-chip Yes Yes Yes Yes Yes No No Yes Yes No No Yes No Yes Yes No No Yes Yes No No No No (Dolby Digital) (MPEG) (PCM) (DTS) (Dolby Digital) (DTS) Language w/Guarantee Card Remote Control Unit Battery UM size x pcs OEM Brand Rod Antenna Poles Terminal Loop Antenna Terminal U/V Mixer 300 ohm to 75 ohm Antenna Adapter Antenna Change Plug Guarantee Card Registration Card Warranty Card ESP Card Service Station List DC Car Cord (Center+) Columbia Offer Sheet Information Sheet (Return) Netflix Card A3-5 Yes Yes Yes Yes Yes No No No Yes 192kHz / 24bit English Yes Yes Yes UM-4 x 2 pcs No No No -No -No Yes No No Yes No No No No No Yes No GENERAL SPECIFICATIONS G-16 Interface Switch Front Rear Indicator Terminals Front Rear G-17 G-18 Set Size Weight G-19 Carton G-20 Material G-21 Environment Power (Tact) Channel Up Channel Down Volume Up Volume Down Play Open/Close Skip+ /Search+ Skip- /SearchStill/Pause Stop Main Power SW Main Power SW Power Stand-by On Timer Video Input Audio Input Other Terminal Video Input Audio Input Video Output Audio Output Digital Audio Output Diversity DC Jack 12V(Center +) VHF/UHF Antenna Input Approx. W x D x H (mm) Net (Approx.) Gross (Approx.) Master Carton Content Material Dimensions W x D x H(mm) Description of Origin Gift Box Material W/Color Photo Label Dimensions W x D x H(mm) Description of Origin Drop Test Natural Dropping At Height (cm) Container Stuffing (40' container) Cabinet Front Rear Jack Panel PCB Non-Halogen Demand Eyelet Demand Environmental standard requirement Pb-free Measures for Whisker A3-6 Yes Yes Yes Yes Yes Yes Yes Yes Yes No Yes No No Yes (Red) No No RCA x 1 RCA x 2(L/MONO, R) Head Phone No No No No Coaxial (DVD Only) No No F Type 440x392.5x393 13.5kg (29.8lbs) 15.5kg (34.2lbs) No --- Sets --- / ------Double/Full Color No 550x496x471 Yes 1 Corner / 3 Edges / 6 Surfaces 62 476 Sets PS 94V0 DECABROM PS 94V0 DECABROM No Yes Green procurement of TOSHIBA Phase3(Phase3A) Yes DISASSEMBLY INSTRUCTIONS 1-3: AV PCB/DVD BLOCK (Refer to Fig. 1-3) 1. REMOVAL OF MECHANICAL PARTS AND P.C. BOARDS 1. Remove the 2 screws 1. 2. Disconnect the following connectors: (CP301, CP302, CP401 and CP3800). 3. Remove the AV PCB/DVD Block in the direction of arrow. 1-1: BACK CABINET (Refer to Fig. 1-1) 1. Remove the 5 screws 1. 2. Remove the screw 2 which are used for holding the Back Cabinet. 3. Remove the AC cord from the AC cord hook 3. 4. Remove the Back Cabinet in the direction of arrow. 1 CP3800 1 CP301 Front Cabinet Front Cabinet CP401 1 CP302 1 AV PCB/DVD Block 1 Fig. 1-3 1 2 3 1-4: DVD BLOCK (Refer to Fig. 1-4) Back Cabinet 1 1. Remove the 11 screws 1. 2. Remove the Top Shield in the direction of arrow (A). 3. Disconnect the following connectors: (CP8001 and CP8002). 4. Remove the 4 screws 2. 5. Remove the DVD Block in the direction of arrow (B). 6. Remove the screw 3. 7. Remove the Jack Shield. 8. Remove the AV PCB in the direction of arrow (C). Fig. 1-1 1-2: CRT PCB (Refer to Fig. 1-2) CAUTION: BEFORE REMOVING THE ANODE CAP, DISCHARGE ELECTRICITY BECAUSE IT CONTAINS HIGH VOLTAGE. BEFORE ATTEMPTING TO REMOVE OR REPAIR ANY PCB, UNPLUG THE POWER CORD FROM THE AC SOURCE. 1 1 1. Remove the Anode Cap. (Refer to REMOVAL OF ANODE CAP) 2. Disconnect the following connector: (CP805). 3. Remove the CRT PCB in the direction of arrow. 1 1 1 1 1 Top Shield 1 1 1 Front Cabinet 1 CRT PCB 2 2 (A) CP805 2 DVD Block 2 CP8002 CP8001 (B) AV PCB 3 Jack Shield (C) Fig. 1-2 Bottom Plate B1-1 Fig. 1-4 DISASSEMBLY INSTRUCTIONS 1-5: DVD PCB/DVD DECK (Refer to Fig. 1-5) 1. Short circuit the position shown in Fig. 1-5 using a soldering iron. If you remove the DVD Deck with no soldering, the Laser may be damaged. 2. Remove the 4 screws 1. 3. Remove the DVD Deck in the direction of arrow (A). 4. Disconnect the following connectors: (CP2301, CP2302 and CP2303). 5. Remove the 2 screws 2. 6. Remove the DVD PCB in the direction of arrow (B). 7. Remove the 4 screws 3. 8. Remove the Deck Shield in the direction of arrow (C). 2 2 DVD PCB CP2303 CP2302 CP2301 1 Pick Up PCB (B) 1 1 DVD Deck 1 3 (A) 3 Short circuit using a soldering iron. 3 3 Deck Shield (C) Deck Angle Fig. 1-5 NOTE 1. Before your operation, please read “PREPARATION OF SERVICING”. 2. Use the Lead Free solder. 3. Manual soldering conditions • Soldering temperature: 350 ± 5˚C • Soldering time: Within 2 seconds • Soldering combination: Sn-3.0Ag-0.5Cu 4. When Soldering/Removing of solder, use the drawing equipment over the Pick Up Unit to keep the Flux smoke away from it. 5. When installing the DVD Deck, remove all the soldering on the short circuit position after the connection of Pick Up PCB and DVD PCB connector. B1-2 DISASSEMBLY INSTRUCTIONS 2. REMOVAL OF DVD DECK PARTS 1 2 NOTE 2 1. Do not disassemble the DVD DECK PARTS except listed parts here. Minute adjustments are needed if the disassemble is done. If the repair is needed except listed parts, replace the DVD MECHA ASS'Y. Main Frame Ass'y 2-1: TRAY (Refer to Fig. 2-1-A) Insulator (R) 1. Set the Tray opened. (Refer to the DISC REMOVAL METHOD AT NO POWER SUPPLY) 2. Unlock the 2 supports 1 and remove the Tray. Main Chassis Ass'y • Screw Torque: 2.0 ± 0.5kgf•cm Main Frame Ass'y Fig. 2-2-A NOTE 1. In case of the Main Chassis Ass'y, install it from (1) to (4) in order. (Refer to Fig. 2-2-B) 2. In case of the Main Chassis Ass'y installation, hook the wire on the Main Frame Ass'y as shown Fig. 2-2-C. 1 Tray 1 Main Frame Ass'y (Bottom Side) Fig. 2-1-A (3) Rack Loading NOTE (3) 1. In case of the Tray installation, install them as the circled section of Fig. 2-1-B so that the each markers are met. (3) Traverse Holder (2) Main Frame Ass'y (1) Main Chassis Ass'y (4) (4) Check Lock Fig. 2-2-B Tray Main Frame Ass'y Fig. 2-1-B 2-2: MAIN CHASSIS ASS'Y (Refer to Fig. 2-2-A) 1. 2. 3. 4. Remove the screw 1. Unlock the 2 supports 2. Remove the Insulator (R) from the Main Frame Ass'y. Remove the Main Chassis Ass'y. Check Hook B2-1 Fig. 2-2-C DISASSEMBLY INSTRUCTIONS 2-3: LOADING MOTOR PCB ASS'Y/ LOADING BELT (Refer to Fig. 2-3-A) 1. 2. 3. 4. 5. Pulley Gear Remove the Loading Belt. Remove the screw 1. Remove the 2 screws 2. Remove the Loading Motor PCB Ass'y. Remove the Pulley Gear. Main Gear Main Frame Ass’y Loading Belt 2 2 Rack Loading 1 Fig. 2-4-A 2 NOTE Main Frame Ass’y 1. In case of the Rack Loading installation, do not mesh it to the Main Gear as shown the Fig. 2-4-B. Rack Loading Pulley Gear 1 Check Hook Loading Motor PCB Ass’y • Screw Torque: 2.5 ± 0.3kgf•cm (Screw 1) • Screw Torque: 1.0 ± 0.3kgf•cm (Screw 2) Fig. 2-3-A NOTE Main Gear 1. In case of the Pulley Motor installation, check if the value of the Fig. 2-3-B is correct. 2. When installing the Loading Motor PCB Ass'y, install it correctly as Fig. 2-3-C. 3. In case of the Loading Motor PCB Ass'y installation, hook the wire on the Main Frame Ass'y as shown Fig. 2-3-C. Pulley Motor Fig. 2-4-B 2-5: CLAMPER ASS'Y (Refer to Fig. 2-5-A) 1. Press the Clamper and rotate the Clamper Plate clockwise, then unlock the 3 supports 1. 2. Remove the Clamper Plate, Clamper Magnet and Clamper. Clamper Plate 7.0 ± 0.1mm Clamper Magnet Loading Motor Main Frame Safety surface for pressing of the insert. Fig. 2-3-B 1 The Lever should be position between A and B. Rack Loading A 1 Clamper 1 Fig. 2-5-A B NOTE 1. In case of the Clamper Ass'y installation, install correctly as Fig. 2-5-B. Clamper Plate Check Hook Loading Motor PCB Ass’y Fig. 2-3-C Clamper 2-4: RACK LOADING/MAIN GEAR/PULLEY GEAR (Refer to Fig. 2-4-A) No gap Fig. 2-5-B 1. Press down the catcher 1 and slide the Rack Loading. 2. Unlock the support 2 and remove the Pulley Gear. 3. Remove the Main Gear. B2-2 DISASSEMBLY INSTRUCTIONS 2-6: TRAVERSE HOLDER/INSULATOR (F)/INSULATOR (R) (Refer to Fig. 2-6-A) NOTE 1. When pushing the Rack Feed in the direction of the arrow, it should be restored to the original position by the spring force. (Refer to Fig. 2-7-B) 2. In case of the Motor Gear installation, check if the value of the Fig. 2-7-C is correct. 3. When installing the wire of the Switch PCB Ass'y, install it correctly as Fig. 2-7-D. 4. After the assembly of the Main Chassis Ass'y, hook the wire on the Main Chassis Ass'y as shown Fig. 2-7-E. 1. Remove the Traverse Holder. 2. Remove the 2 Insulator (F). 3. Remove the Insulator (R). Insulator (R) Main Chassis Ass'y Insulator (F) Traverse Holder Insulator (F) Fig. 2-6-A Push Rack Feed Ass'y NOTE Fig. 2-7-B 1. In case of the Insulator (F) installation, install correctly as Fig. 2-6-B. 2. In case of the Insulator (R) installation, install correctly as Fig. 2-6-C. Motor Gear 6.0 ± 0.2mm Insulator (F) Feed Motor Traverse Holder Safety surface for pressing of the insert. Fig. 2-6-B Fig. 2-7-C Insulator (R) Main Chassis Ass'y (Top Side) ~ FEED MOTOR ~ BLUE (4) ORANGE (3) Fig. 2-6-C Switch PCB Ass'y ~ SPINDLE MOTOR ~ 2-7: RACK FEED ASS'Y/SWITCH PCB ASS'Y/FEED MOTOR (Refer to Fig. 2-7-A) 1. 2. 3. 4. 5. 6. 7. BLACK (2) RED (1) Remove the screw 1. Remove the Rack Feed Ass'y. Remove the screw 2. Remove the Switch PCB Ass'y. Remove the 2 screw 3. Remove the Feed Motor. Remove the Motor Gear. • Install wire from (1) to (4) in order. Fig. 2-7-D Main Chassis Ass'y (Bottom Side) 1 Check Hook Check Hook 2 Rack Feed Ass'y 3 Check Hook 3 Switch PCB Ass'y Check Hook Motor Gear • Loosen the wire in the direction of the arrow. Main Chassis Ass'y • Screw Torque: 5.0 ± 0.3kgf•cm (Screw 1) • Screw Torque: 3.0 ± 0.3kgf•cm (Screw 2) • Screw Torque: 1.0 ± 0.3kgf•cm (Screw 3) Feed Motor Fig. 2-7-A B2-3 Fig. 2-7-E DISASSEMBLY INSTRUCTIONS 2-8: FFC WIRE HANDLING 1. When installing the FFC, fold it correctly and install it as shown from Fig. 2-8-A to Fig. 2-8-C. NOTE 1. Do not make the folding lines except the specified positions for the FFC. [ 24 pin FFC ] Pick Up Side Printing Surface Fold it by 90˚ 54 ± 1mm Fold Printing Surface 43 ± 1mm Fig. 2-8-A [ 6 pin FFC ] (1) Reinforcement Plate (3) Reinforcement Plate 59 ± 1mm 10 ± 1mm Printing Surface Printing Surface Fold Reinforcement Plate Fold (4) Fold Printing Surface (2) 10 ± 1mm Printing Surface Fold Printing Surface 44 ± 1mm • Proceed the steps (1) through (4). Fig. 2-8-B [ 5 pin FFC ] (1) Reinforcement Plate (3) Reinforcement Plate 55 ± 1mm 10 ± 1mm Printing Surface Printing Surface Fold Reinforcement Plate Fold (4) Fold 10 ± 1mm Printing Surface Printing Surface (2) • Proceed the steps (1) through (4). Fold Printing Surface 60 ± 1mm Fig. 2-8-C B2-4 DISASSEMBLY INSTRUCTIONS 3. After one side is removed, pull in the opposite direction to remove the other. 3. REMOVAL OF ANODE CAP Read the following NOTED items before starting work. NOTE * After turning the power off there might still be a potential voltage that is very dangerous. When removing the Anode Cap, make sure to discharge the Anode Cap's potential voltage. * Do not use pliers to loosen or tighten the Anode Cap terminal, this may cause the spring to be damaged. Take care not to damage the Rubber Cap. INSTALLATION 1. Clean the spot where the cap was located with a small amount of alcohol. (Refer to Fig. 3-3.) REMOVAL NOTE Confirm that there is no dirt, dust, etc. at the spot where the cap was located. 1. Follow the steps as follows to discharge the Anode Cap. (Refer to Fig. 3-1.) Connect one end of an Alligator Clip to the metal part of a flat-blade screwdriver and the other end to ground. While holding the plastic part of the insulated Screwdriver, touch the support of the Anode with the tip of the Screwdriver. A cracking noise will be heard as the voltage is discharged. Location of Anode Cap GND on the CRT Fig. 3-3 2. Arrange the wire of the Anode Cap and make sure the wire is not twisted. 3. Turn over the Rubber Cap. (Refer to Fig. 3-4.) CRT Screwdriver Support Alligator Clip GND on the CRT Fig. 3-4 Fig. 3-1 4. Insert one end of the Anode Support into the anode button, then the other as shown in Fig. 3-5. 2. Flip up the sides of the Rubber Cap in the direction of the arrow and remove one side of the support. (Refer to Fig. 3-2.) Rubber Cap CRT CRT Support Fig. 3-2 Support 5. Confirm that the Support is securely connected. 6. Put on the Rubber Cap without moving any parts. B3-1 Fig. 3-5 DISASSEMBLY INSTRUCTIONS 3. When IC starts moving back and forth easily after desoldering completely, pickup the corner of the IC using a tweezers and remove the IC by moving with the IC desoldering machine. (Refer to Fig. 4-3.) 4. REMOVAL AND INSTALLATION OF FLAT PACKAGE IC REMOVAL 1. Put Masking Tape (cotton tape) around the Flat Package IC to protect other parts from any damage. (Refer to Fig. 4-1.) NOTE Some ICs on the PCB are affixed with glue, so be careful not to break or damage the foil of each IC leads or solder lands under the IC when removing it. NOTE Masking is carried out on all the parts located within 10 mm distance from IC leads. Blower type IC desoldering machine IC Masking Tape (Cotton Tape) Tweezers Fig. 4-1 2. Heat the IC leads using a blower type IC desoldering machine. (Refer to Fig. 4-2.) IC Fig. 4-3 NOTE Do not rotate or move the IC back and forth , until IC can move back and forth easily after desoldering the leads completely. 4. Peel off the Masking Tape. 5. Absorb the solder left on the pattern using the Braided Shield Wire. (Refer to Fig. 4-4.) NOTE Do not move the Braided Shield Wire in the vertical direction towards the IC pattern. Blower type IC desoldering machine Braided Shield Wire Soldering Iron IC Fig. 4-2 IC pattern Fig. 4-4 B4-1 DISASSEMBLY INSTRUCTIONS 4. When bridge-soldering between terminals and/or the soldering amount are not enough, resolder using a Thintip Soldering Iron. (Refer to Fig. 4-8.) INSTALLATION 1. Take care of the polarity of new IC and then install the new IC fitting on the printed circuit pattern. Then solder each lead on the diagonal positions of IC temporarily. (Refer to Fig. 4-5.) IC Thin-tip Soldering Iron Soldering Iron Fig. 4-8 Solder temporarily 5. Finally, confirm the soldering status on four sides of the IC using a magnifying glass. Confirm that no abnormality is found on the soldering position and installation position of the parts around the IC. If some abnormality is found, correct by resoldering. Solder temporarily Fig. 4-5 NOTE When the IC leads are bent during soldering and/or repairing, do not repair the bending of leads. If the bending of leads are repaired, the pattern may be damaged. So, always be sure to replace the IC in this case. 2. Supply the solder from the upper position of IC leads sliding to the lower position of the IC leads. (Refer to Fig. 4-6.) Soldering Iron Solder IC Supply soldering from upper position to lower position Fig. 4-6 3. Absorb the solder left on the lead using the Braided Shield Wire. (Refer to Fig. 4-7.) NOTE Do not absorb the solder to excess. Soldering Iron IC Braided Shield Wire Fig. 4-7 B4-2 SERVICE MODE LIST This unit provided with the following SERVICE MODES so you can repair, examine and adjust easily. To enter to the SERVICE MODE function, press and hold both buttons simultaneously on the main unit and on the remote control for more than a the standard time in the appropriate condition. (See below chart.) Set Condition Set Key Remocon Key Standard Time TV mode VOL. DOWN (Minimum) 0 2 sec. Releasing of V-CHIP PASSWORD. TV mode VOL. DOWN (Minimum) 1 2 sec. Initialization of factory TV data. NOTE: Do not use this for normal servicing. If you set factory initialization, the memories are reset such as the channel setting, and the POWER ON total hours. DVD mode (No disc) VOL. DOWN (Minimum) 4 2 sec. Initialization of factory DVD data. NOTE: Do not use this for normal servicing. TV mode VOL. DOWN (Minimum) 6 2 sec. Can be checked of the INITIAL DATA of MEMORY IC. Refer to the "WHEN REPLACING EEPROM (MEMORY) IC". TV mode VOL. DOWN (Minimum) 8 2 sec. Check of the SUM DATA, POWER ON total hours and MICON VERSION on the screen. Refer to the "WHEN REPLACING EEPROM (MEMORY) IC". ALL mode VOL. DOWN (Minimum) 9 2 sec. Display of the Adjustment MENU on the screen. Refer to the "ELECTRICAL ADJUSTMENT" (On-Screen Display Adjustment). DVD mode (No disc) STOP 7 3 sec. Releasing of PARENTAL LOCK. Refer to the "PARENTAL CONTROL - RATING LEVEL". Operations Method Operations Press the following remocon keys continuously. SETUP SUBTITLE 3 AUDIO 0 Tray cannot be opened. Refer to the “TRAY LOCK”. WHEN REPLACING EEPROM (MEMORY) IC CONFIRMATION OF CHECK SUM, POWER ON TOTAL HOURS AND MICON VERSION Initial total of MEMORY IC can be checked on the screen. Total hours are displayed in 16 system of notation. NOTE: If you set a factory initialization, the total hours is reset to "0". Please refer to "CONFIRMATION OF INITIAL DATA" when SUM DATA is not corresponding. 1. Turn on the POWER, and set to the TV mode. 2. Set the VOLUME to minimum. 3. Press both VOL. DOWN button on the set and Channel button (8) on the remote control for more than 2 seconds. 4. After the confirmation of each check sum, turn off the power. OEC6087A_115 MICON Version INIT : 1773 Initialsetting data check sum. ROM : 20C2 Rom correction data check sum. CRT ON 0000 FIG. 1 C-1 POWER ON total hours. = (16 x 16 x 16 x thousands digit value) + (16 x 16 x hundreds digit value) + (16 x tens digit value) + (ones digit value) WHEN REPLACING EEPROM (MEMORY) IC CONFIRMATION OF INITIAL DATA If a service repair is undertaken where it has been required to change the MEMORY IC, the following steps should be taken to ensure correct data settings while making reference to TABLE 1. INI +0 +1 +2 +3 +4 +5 +6 +7 +8 +9 +A +B +C +D +E +F 00 80 04 E2 4C 4F 12 A0 55 35 94 23 00 C9 70 70 00 10 0C 00 00 55 05 7A A0 50 21 74 50 00 00 10 55 35 20 0A 0C 0E 10 12 14 16 18 1A 1B 1C 1D 1E 1F 20 21 30 22 23 24 25 26 27 28 28 29 29 2A 2A 2B 2B 2C 2C 40 2D 2D 2E 2E 2F 2F 30 30 31 31 32 32 33 33 34 34 50 35 36 37 38 3B 3E 41 44 47 4A 4D 50 53 56 5A 5F 60 C5 4B BF BF 7F 7F 7F 5F --- --- --- --- --- --- --- --- Table 1 1. Turn on the POWER, and set to the TV mode. 2. Set the VOLUME to minimum. 3. Press both VOL. DOWN button on the set and Channel button (6) on the remote control for more than 2 seconds. ADDRESS and DATA should appear as FIG 1. ADDRESS DATA OEC6087A_115 INIT 00 80 CRT ON 0000 FIG. 1 4. ADDRESS is now selected and should "blink". Using the UP/DOWN buton on the remote, step through the ADDRESS until Press RIGHT/LEFT button to select DATA. When DATA is selected, it will "blink". 5. Again, step through the DATA using UP/DOWN button until required DATA value has been selected. 6. Pressing RIGHT/LEFT button will take you back to ADDRESS for further selection if necessary. 7. Repeat steps 4 to 6 until all data has been checked. 8. When satisfied correct DATA has been entered, turn POWER off (return to STANDBY MODE) to finish DATA input. After the data input, set to the initializing of shipping. 9. Turn POWER on. 10. Press both VOL. DOWN button on the set and Channel button (1) on the remote control for more than 2 seconds. 11. After the finishing of the initializing of shipping, the unit will turn off automatically. The unit will now have the correct DATA for the new MEMORY IC. C-2 ELECTRICAL ADJUSTMENTS 1. BEFORE MAKING ELECTRICAL ADJUSTMENTS Read and perform these adjustments when repairing the circuits or replacing electrical parts or PCB assemblies. CAUTION • Use an isolation transformer when performing any service on this chassis. • Before removing the anode cap, discharge electricity because it contains high voltage. • When removing a PCB or related component, after unfastening or changing a wire, be sure to put the wire back in its original position. • When you exchange IC and Transistor with a heat sink, apply silicon grease on the contact section of the heat sink. Before applying new silicon grease, remove all the old silicon grease. (Old grease may cause damages to the IC and Transistor). NO. FUNCTION NO. FUNCTION 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 OSD CUT OFF HVCO HPHA VSIZ VSHI RDRV BDRV RCUT GCUT BCUT BRTC BRTX BRTN CNTC CNTX CNTN COLC COLX COLN TNTC SHRP BRTCA BRTXA BRTNA CNTCA CNTXA Prepare the following measurement tools for electrical adjustments. 1. 2. 3. 4. 5. Oscilloscope Digital Voltmeter AC Voltmeter Pattern Generator Multi-Sound Signal Generator Fig. 1-2 2. BASIC ADJUSTMENTS 2-1: CONSTANT VOLTAGE 1. Place the set in AV MODE without signal. 2. Using the remote control, set the brightness and contrast to normal position. 3. Connect the digital voltmeter to TP401. 4. Adjust the VR3800 until the digital voltmeter is 115 ± 1V. On-Screen Display Adjustment 1. Set the VOLUME to minimum. 2. Press the VOL. DOWN button on the set and the Channel button (9) on the remote control for more than 2 seconds to appear the adjustment mode on the screen as shown in Fig. 1-1. Function Step No. CNTNA COLCA COLXA COLNA TNTCA SHRPA BRTCD BRTXD BRTND CNTCD CNTXD CNTND COLCE COLXD COLND TNTCD SHRPD BRTCG BRTXG BRTNG CNTCG CNTXG CNTNG TVM PVM LVL SEPAL SEPAH 2-2: FOCUS 1. Receive the monoscope pattern. 2. Turn the Focus Volume fully counterclockwise once. 3. Adjust the Focus Volume until picture is distinct. 2-3: CUT OFF 01 OSD 17 1. Adjust the unit to the following settings. R CUT OFF=7F, G CUT OFF=7F, B CUT OFF=7F, R DRIVE=3F, B DRIVE=3F 2. Set condition is Aging Test for more than 15 minutes. 3. Set condition is AV MODE without signal. 4. Using the remote control, set the brightness and contrast to normal position. 5. Activate the adjustment mode display of Fig. 1-1 and press the channel button (02) on the remote control to select "CUT OFF". 6. Adjust the Screen Volume until a dim raster is obtained. Fig. 1-1 3. Use the Channel UP/DOWN button or Channel button (1-0) on the remote control to select the options shown in Fig. 1-2. 4. Press the MENU button on the remote control to end the adjustments. D-1 ELECTRICAL ADJUSTMENTS 2-4: WHITE BALANCE 2-7: VERTICAL SIZE NOTE: Adjust after performing CUT OFF adjustment. 1. Receive the monoscope pattern. 2. Using the remote control, set the brightness and contrast to normal position. 3. Activate the adjustment mode display of Fig. 1-1 and press the channel button (05) on the remote control to select "VSIZ". 4. Press the RIGHT/LEFT button on the remote control until the SHIFT quantity of the OVER SCAN on upside and downside becomes 10 ± 2%. 5. Receive a broadcast and check if the picture is normal. 1. Place the set in Aging Test for more than 15 minutes. 2. Receive the gray scale pattern from the Pattern Generator. 3. Using the remote control, set the brightness and contrast to normal position. 4. Activate the adjustment mode display of Fig. 1-1 and press the channel button (07) on the remote control to select "R DRIVE". 5. Press the CH. UP/DOWN button on the remote control to select the "B DRIVE", "R CUT OFF", "G CUT OFF" or "B CUT OFF". 6. Adjust the VOL. UP/DOWN button on the remote control to whiten the B DRIVE, R CUT OFF, G CUT OFF and B CUT OFF at each step tone sections equally. 7. Perform the above adjustments 5 and 6 until the white achieved. 2-8: BRIGHT CENTER 1. Receive the monoscope pattern. (RF Input) 2. Using the remote control, set the brightness and contrast to normal position. 3. Activate the adjustment mode display of Fig. 1-1 and press the channel button (12) on the remote control to select "BRTC". 4. Press the RIGHT/LEFT button on the remote control until the white 0% is begin to shine. 5. Receive the monoscope pattern. (Audio Video Input) 6. Press the INPUT button on the remote control to set to the AV mode. 7. Using the remote control, set the brightness and contrast to normal position. 8. Activate the adjustment mode display of Fig. 1-1 and press the channel button (23) on the remote control to select "BRTCA". 9. Press the RIGHT/LEFT button on the remote control until the white 0% is begin to shine. 10. Press the TV/DVD button on the remote control to set to the DVD mode. 11. Activate the adjustment mode display of Fig. 1-1 and press the channel button (34) on the remote control to select "BRTCD". 12. Press the RIGHT/LEFT button on the remote control to set the same step numbers as the AV. 13. Press the INPUT button on the remote control to set to the GAME mode. 14. Activate the adjustment mode display of Fig. 1-1 and press the channel button (45) on the remote control to select "BRTCG". 15. Press the RIGHT/LEFT button on the remote control to set the same the same step numbers as the AV. 2-5: HORIZONTAL PHASE 1. Receive the monoscope pattern. 2. Using the remote control, set the brightness and contrast to normal position. 3. Activate the adjustment mode display of Fig. 1-1 and press the channel button (04) on the remote control to select "HPHA". 4. Press the RIGHT/LEFT button on the remote control until the SHIFT quantity of the OVER SCAN on right and left becomes minimum. 2-6: VERTICAL SHIFT 1. Receive the monoscope pattern. 2. Using the remote control, set the brightness and contrast to normal position. 3. Activate the adjustment mode display of Fig. 1-1 and press the channel button (06) on the remote control to select "VSHI". 4. Check if the step No. VSHI is "02". 5. Adjust the VR402 until the horizontal line becomes fit to notch of the shadow mask. (Refer to Fig. 2-1) horizontal line ;; ;; ;; ;;; ;; ;; ;; Notch Shadow mask Fig. 2-1 D-2 ELECTRICAL ADJUSTMENTS 2-9: OSD POSITION 2-11: COLOR CENTER 1. Activate the adjustment mode display of Fig. 1-1. 2. Press the RIGHT/LEFT button on the remote control until the difference of A and B becomes minimum. (Refer to Fig. 2-2) 1. Receive the color bar pattern. (RF Input) 2. Using the remote control, set the brightness, contrast, color and tint to normal position. 3. Connect the oscilloscope to TP024. 4. Activate the adjustment mode display of Fig. 1-1 and press the channel button (18) on the remote control to select "COLC". 5. Adjust the VOLTS RANGE VARIABLE knob of the oscilloscope until the range between white 100% and 0% is set to 4 scales on the screen of the oscilloscope. 6. Press the RIGHT/LEFT button on the remote control until the red color level is adjusted to 110 ± 5% of the white level. (Refer to Fig. 2-4) 7. Receive the color bar pattern. (Audio Video Input) 8. Press the INPUT button on the remote control to set to the AV mode. 9. Using the remote control, set the brightness, contrast, color and tint to normal position. 10. Activate the adjustment mode display of Fig. 1-1 and press the channel button (29) on the remote control to select "COLCA". 11. Adjust the VOLTS RANGE VARIABLE knob of the oscilloscope until the range between white 100% and 0% is set to 4 scales on the screen of the oscilloscope. 12. Press the RIGHT/LEFT button on the remote control until the red color level is adjusted to 110 ± 5% of the white level. (Refer to Fig. 2-4) 13. Press the TV/DVD button on the remote control to set to the DVD mode. 14. Activate the adjustment mode display of Fig. 1-1 and press the channel button (40) on the remote control to select "COLCD". 15. Press the RIGHT/LEFT button on the remote control to set the same the same step numbers as the AV. 01 OSD 17 A B Fig. 2-2 2-10: TINT 1. Receive the color bar pattern. (RF Input) 2. Using the remote control, set the brightness, contrast, color and tint to normal position. 3. Connect the oscilloscope to TP022. 4. Activate the adjustment mode display of Fig. 1-1 and press the channel button (21) on the remote control to select "TNTC". 5. Press the RIGHT/LEFT button on the remote control until the section "A" becomes a straight line. (Refer to Fig. 2-3) 6. Receive the color bar pattern. (Audio Video Input) 7. Press the INPUT button on the remote control to set to the AV mode. 8. Using the remote control, set the brightness, contrast, color and tint to normal position. 9. Activate the adjustment mode display of Fig. 1-1 and press the channel button (32) on the remote control to select "TNTCA". 10. Press the RIGHT/LEFT button on the remote control until the section "A" becomes a straight line. (Refer to Fig. 2-3) 11. Press the TV/DVD button on the remote control to set to the DVD mode. 12. Activate the adjustment mode display of Fig. 1-1 and press the channel button (43) on the remote control to select "TNTCD". 13. Press the RIGHT/LEFT button on the remote control to set the same the same step numbers as the AV. White 0% 100% White 100% "A" Fig. 2-3 D-3 Red Level Fig. 2-4 ELECTRICAL ADJUSTMENTS 2-12: CONTRAST MAX 2-15: Confirmation of Fixed Value (Step No.) 1. Activate the adjustment mode display of Fig. 1-1 and press the channel button (16) on the remote control to select "CNTX". 2. Press the RIGHT/LEFT button on the remote control until the contrast step No. becomes "70" 3. Receive a broadcast and check if the picture is normal. 4. Press the INPUT button on the remote control to set to the AV mode. 5. Activate the adjustment mode display of Fig. 1-1 and press the channel button (27) on the remote control to select "CNTXA". 6. Press the RIGHT/LEFT button on the remote control until the contrast step No. becomes "70" 7. Receive a broadcast and check if the picture is normal. 8. Press the TV/DVD button on the remote control to set to the DVD mode. 9. Activate the adjustment mode display of Fig. 1-1 and press the channel button (38) on the remote control to select "CNTXD". 10. Press the RIGHT/LEFT button on the remote control to set the same step numbers as the AV. 11. Press the INPUT button on the remote control to set to the GAME mode. 12. Activate the adjustment mode display of Fig. 1-1 and press the channel button (49) on the remote control to select "CNTXG". 13. Press the RIGHT/LEFT button on the remote control to set the same the same step numbers as the AV. Please check if the fixed values of the each of the adjustment items are set correctly referring below. NO. 03 13 14 15 17 19 20 22 24 25 26 28 30 31 33 35 36 37 39 41 42 44 46 47 48 50 51 52 2-13: LEVEL 1. Receive the VHF HIGH (70dB). 2. Connect the AC voltmeter to pin 6 of CP101. 3. Activate the adjustment mode display of Fig. 1-1 and press the channel button (53) on the remote control to select "LVL". 4. Press the RIGHT/LEFT button on the remote control until the AC voltmeter is 80 ± 2mV. 2-14: SEPARATION 1. Set the multi-sound signal generator L-ch=1KHz, R-ch =Non input and receive the RF signal. 2. Connect the oscilloscope to the SP351 code. 3. Press the AUDIO SELECT button on the remote control to set to the stereo mode. 4. Activate the adjustment mode display of Fig. 1-1 and press the channel button (54) on the remote control to select "SEPAL". 5. Press the RIGHT/LEFT button on the remote control to adjust it until the R-ch output becomes minimum. 6. Press the CH UP button 1 time to set to "SEPAH" mode. 7. Press the RIGHT/LEFT button on the remote control to adjust it until the R-ch output becomes minimum. 8. Set the multi-sound signal generator L-ch=Non input, R-ch=1KHz and receive the RF signal. 9. Connect the oscilloscope to the SP352 code. Then perform the above adjustments 3~7. D-4 FUNCTION HVCO BRTX BRTN CNTC CNTN COLX COLN SHRP BRTXA BRTNA CNTCA CNTNA COLXA COLNA SHRPA BRTXD BRTND CNTCD CNTND COLXD COLND SHRPD BRTXG BRTNG CNTCG CNTXG TVM PVM STEP NO. 04 60 30 45 30 50 00 32 60 30 45 30 50 00 2E 60 30 45 30 50 00 2E 60 30 45 30 00 40 ELECTRICAL ADJUSTMENTS 3-3: STATIC CONVERGENCE 3. PURITY AND CONVERGENCE ADJUSTMENTS NOTE Adjust after performing adjustments in section 3-2. NOTE 1. Receive the crosshatch pattern from the color bar generator. 2. Combine red and blue of the 3 color crosshatch pattern on the center of the screen by adjusting the pair of 4 pole magnets. 3. Combine red/blue (magenta) and green by adjusting the pair of 6 pole magnets. 1. Turn the unit on and let it warm up for at least 30 minutes before performing the following adjustments. 2. Place the CRT surface facing east or west to reduce the terrestrial magnetism. 3. Turn ON the unit and demagnetize with a Degauss Coil. 3-1: STATIC CONVERGENCE (ROUGH ADJUSTMENT) 1. Tighten the screw for the magnet. Refer to the adjusted CRT for the position. (Refer to Fig. 3-1) If the deflection yoke and magnet are in one body, untighten the screw for the body. 2. Receive the green raster pattern from the color bar generator. 3. Slide the deflection yoke until it touches the funnel side of the CRT. 4. Adjust center of screen to green, with red and blue on the sides, using the pair of purity magnets. 5. Switch the color bar generator from the green raster pattern to the crosshatch pattern. 6. Combine red and blue of the 3 color crosshatch pattern on the center of the screen by adjusting the pair of 4 pole magnets. 7. Combine red/blue (magenta) and green by adjusting the pair of 6 pole magnets. 8. Adjust the crosshatch pattern to change to white by repeating steps 6 and 7. 3-4: DYNAMIC CONVERGENCE NOTE Adjust after performing adjustments in section 3-3. 1. Adjust the differences around the screen by moving the deflection yoke upward/downward and right/left. (Refer to Fig. 3-2-a) 2. Insert three wedges between the deflection yoke and CRT funnel to fix the deflection yoke. (Refer to Fig. 3-2-b) RGB RGB R G B 3-2: PURITY R G B UPWARD/DOWNWARD SLANT NOTE RIGHT/LEFT SLANT Fig. 3-2-a Adjust after performing adjustments in section 3-1. 1. Receive the green raster pattern from color bar generator. 2. Adjust the pair of purity magnets to center the color on the screen. Adjust the pair of purity magnets so the color at the ends are equally wide. 3. Move the deflection yoke backward (to neck side) slowly, and stop it at the position when the whole screen is green. 4. Confirm red and blue colors. 5. Adjust the slant of the deflection yoke while watching the screen, then tighten the fixing screw. WEDGE WEDGE WEDGE DEFLECTION YOKE DEFLECTION YOKE SCREW MAGNET SCREW 6 POLE MAGNETS 4 POLE MAGNETS PURITY MAGNETS Fig. 3-1 D-5 WEDGE POSITION Fig. 3-2-b ELECTRICAL ADJUSTMENTS 4. ELECTRICAL ADJUSTMENT PARTS LOCATION GUIDE (WIRING CONNECTION) CRT PCB CD805 CP805 TP022 CP806 TP024 TP023 J801 CP802B CP803B CD803 CRT CD802 VR3800 J4201 CP 80 3A FB401 TP401 TU001 AC IN R408 CP401 CD3800 CRT CP101 S3801 S3802 CP3800 CRT VR402 CP802A CP8002 CD302 CP8001 CD8101 CD301 CP301 CP302 SPEAKER (SP352) J2201 J2204 J2203 J2202 SPEAKER (SP351) AV PCB DVD DECK CP2303 CP8101 CP2302 CD4002 CP2301 DVD PCB CD2001 CD2301 CD2302 D-6 DVD BLOCK DIAGRAM TV BLOCK DVD LOADER DM-3S REG+3.3V, 1.9V IC4003 BA33E00WHFP-TR A D A, B B C DVD/CDPD SSCTXD RF, A, B, C, D, E, F SSCRXD SSCCLK OPU RDY[I/O(0)] DVD/CD, DVD_LD, CD, LD, VC SPINDLE/ STEPING/ SLED MOTOR TR+/-, FO+/-, MOT_LD+/-, MOT_SLED+/-, MOT_SPDL+/- Motor Drive IC2301 LA6565VR-TLM-E SPINDLE/SLED/ FOCUS/TRACK_PWM, TRAY_CLOSE/OPEN MPEG/MICON/DSP/RF_AMP IC4001 ZR36862PQCG-B SPDIF DVD C DVD Y DVD RESET DRVSB E HOME, TIN_SW, TOUT_SW A FLASH 16M IC4007 SST39VF1601-70-4C-EKE RAMDQM, CLK, CKE, WE#, CAS#, RAS#, CS0#, SD_BA0 HA0~A19, HD0~D15, MEMCS0, RD, WR ML, MC, MD, AMCLK, ABCLK, ALRCLK, ASDATA0 STEREO DAC IC8102 PCM1753DBQR ZERO AUDIO L AUDIO R D SD_A0~A10 SD_D0~D15 16M SDRAM IC4009 M12L16161A-7TG A A---3.3V B---1.8V C---3.8V D---5V E---6V E-1 E-2 VOL DOWN VOL UP CH UP CH DOWN TV BLOCK DIAGRAM OS2202 RESET IC103 PST3231NR 1 2 1 MEMORY IC199 AT24C04N-10SU-2.7 *A *A 6 POWER ON/OFF 31 OPEN/CLOSE STOP X101 16MHz PLAY TU001 13 18 12 19 MICON IC101 OEC6087A 27 5 29 SCL SDA AUDIO OUT 10 11 13 20 22 23 28 32 SKIP FF 1 7 6 8 5 34 33 36 37 43 SKIP REW *B *C FROM DVD BLOCK 12 DVD C DVD Y 10 DVD_RESET 18 8 SSCRXD SSCTXD SSCCLK 28 RDY(I/O(0)) AUDIO L AUDIO R Q4205 ZERO X602 3.579545MHz 11 MUTE SW Q4202~Q4204, Q4206 L MUTE SW Q4201 SPDIF 29 2 15 3 14 4 16 6 27 9 R.OUT G.OUT CRT V801 B.OUT DY801 32 30 R 23 DRIVER 41 8 7 FB401 Q406 Q405 21 9 F V.OUT 7 IC401 LA78040N-E 35 24 3 H.DRIVE H.OUT 1 FBT F S 7 9 40 HV 18 19 2 14 3 21 22 *A---AT+5V *B---P.CON+9V *C---P.CON+5V *D---P.CON+12V Q101 CHROMA IC601 M61277FP-DF0H MUTE SW 4 2 2 2 V L R J4201 J2202 J2203 J2204 2 SOUND DECORDER IC902 AN5829S-E1V 2 SOUND AMP IC352 AN7513 L CH SPEAKER SP351 R CH SPEAKER SP352 6 8 SOUND+B 4 2 SOUND AMP IC353 AN7513 6 7 8 2 3 5 SOUND+B E-3 1 HEADPHONE JACK J2201 E-4 POWER BLOCK DIAGRAM Q3001 DRIVER UNREG+3.8V Q3003 P. ON SW L3800 DEGAUSS COIL P.CON+5V REG. IC3002 KIA278R05PI 2 1 AC IN F3800 P.CON+5V (DVD) TRANSFORMER SWITCHING T3800 D3808, D3809, D3815, D3816 P.CON+5V Q3008 DRIVER RECTIFIER AT+5V 10 SOUND+B 12 FEED BACK MOTOR+6V REG. IC3001 BA00BC0WT-V5 8 Q3803 POWER 5 VR3800 +B ADJ. Q3800 FEED BACK SW IC3800 PS2561AL1-1-V(W) 18 2 4 MOTOR+B (+6V) 17 14 Q3005 DRIVER P.CON+9V Q3002 DRIVER P.CON+12V Q3007 P. ON SW POWER ON-H +B FB401 2 E-5 E-6 F-1 IC4003 C8113 C8126 R8112 W824 W826 DME060A B4008 C4095 B4006 C4072 C4076 C4010 B4003 B4016 C4002 R4022 C4075 B4014 C4033 R4043 B2303 R2309 B2305 C2315 C2347 Q2304 C2326 B2304 C2342 R2302 B4013 C4057 B4012 C4056 C4003 B4011 C2365 R2359 C2318 R2339 R2347 B4007 B4005 C4082 C4013 C4004 W837 D4002 W806 C4099 C4014 C4019 B4018 R2313 C2332 Q2305 C4036 C4080 D4006 C4018 R4008 C4030 B4001 C4086 R2336 C2301 R2348 D4007 C4047 R4064 C4022 C4020 C4023 C4024 C4007 C4101 C4034 C2306 R2346 C2331 R2357 R2358 C2305 C2357 C2359 C2360 B2301 R2356 B2302 Q2303 C4097 W850 C4065 C4077 R4048 R4026 R4027 C4025 C4029 C4031 R4025 R4024 C4098 C4046 C4045 C4027 W836 C4012 C4052 C4040 R4045 R4012 R4042 R4081 R4070 C8106 R4038 C4026 R4072 R4018 R4016 C4035 C4032 C4041 C8120 B8103 IC4009 R4039 R4021 R4019 W842 R4020 R2352 R2350 R2353 C2358 R2351 R2342 R2349 C2313 DVD (TOP SIDE) C4015 D8111 R2328 C8108 R4014 C2314_1 IC2301 R2323 D4005 R4069 C4069_1 R2338 R2335 R2329 R4037 R4001 R2330 C8105 R4036 IC4007 D4003 157 R4004 R4005 R4003 R4002 C2307 D8112 X4001 C4028 R2326 C8104 C4109 C8121 IC4001 C4081 R2301 R2321 C2304 D2304 D2303 R2304 R2337 R2325 C4059 R8113 R2327 L8102 C4074 W818 105 B4010 C4016 C4017 R4071 53 R2308 R2320 R2310 L8103 IC8102 C4088 C4085 R2305 R2307 R2319 CP2302 C8107 1 C4038 R4040 C8119_1 R4051 C8114 C4096 C2303 R2303 C2302 C2310_1 W843 C2329_1 R2360 C2348 R2324 W819 C8125 C8109 C4050 R4060 R4062 R2334 C2309 C8122 C4009_1 R4052 R4063 R4077 C4053_1 R4041 W829 C4039 C4008 C4068_1 C2341_1 R2306 C2328_1 Q2301 R2340 C2346_1 C2327_1 C2340_1 C2343_1 R4061 B4009 C4001 R4078 C4106 C4078_1 C4064 C4062 C4070 R2332 R2333 C4011_1 C4021 C4083_1 C4067_1 W854 C4071_1 B4002 R2355 R4009 R4080 W808 R4050 R4033 R4053 R4054 C4063 CP2301 C4066 L4001 C4084_1 C4044 C4090 Q2302 C4089 C4100 PRINTED CIRCUIT BOARDS DVD (BOTTOM SIDE) CP2303 R2318 R2341 D4004 R4058 R4059 CP8101_3 CD4002 DME060A F-2 PRINTED CIRCUIT BOARDS AV/CRT (INSERTED PARTS) SOLDER SIDE C429 W841 C421 _1 23 C4 C422 28_ 1 R460 W851 FB401_2 Q406 HS402 D409 ATTENTION R409 R401 R444 R410 R431 R406 HS3001 R430 R 45 C431 0 C402 W001 R445_1 D3814 C3818 D3811 R3802 W002 W211 D3803 W014 C3017 C3823 C3822 W813 R3831 D3802 D3827 D3820 D3821 D3823 D3818 C3824 C3826 W025 C3827 C3023 C3820 R3830 R3004 R3013 C3030 D601 D603 D602 D3819 W045 CP3800 D605 W020 Q3002 D3801 R3805 TH3800_2 Q3800 R3815 R3833 W833 D3806 C3815 C648 C639 C649 D3822 W043 R3804 T3800 R614 W063 L601 W060 L603 W027 IC3800 S802Y D3829 HS3800 R3825 Q3803 R3812 D3816 R3826 R3828 R3817_1 W867 W056 C3811 B3800 W802 D3815 C3807 W059 R3827 R638 L3801 W061 W062 W058 W007 C3812 C3814 D3809 6 80 R3 TU001 C006 L001 L4202 C4204 W008 R4205 W009 W828 R 30 05 B4201 R3822 W823 W031 R003 R004 W035 W030 W029 D3807 RISK OF FIRE - REPLACE AS MARKED . W033 W010 D3812 J4201 R3818 R3821 R3816 FH3801 W895 D3810 C3808 FH3800 F3800 S3801 R3017 W034 W065 C3010 R4204_1 W134 W135 C119 W205 C4201 W206 R4203 OS2202 W220 W067 W068 W071 W070 W072 W137 W138 W026 R3015 Q3001 W066 CP802A Q3802 W808 D3804 C3002 W834 W142 W821 W139 W140 C3011 W141 W143 W145 W144 W208 SW2213 CP8002 CME066B W005 C3810 W818 S3802 W149 W147 W148 W853 SW2215 CP8001 CP301 R3803 W844 C642 W191 W190 W820 D3808 W209 W207 R3800_1 R3813 W874 C3801 W210 D2201 D111 D110 D3831 C3816 W047 R612 C615 W192 D109 W189 D3824 W118 W195 R453 W018 R432 W016 C3004 S802X W022 W051 W052 W053 R650 W859 W055 W216 W050 C643 C610 W850 W122 TP402 D402 VR3800 D3817 S801Y W889 W193 W840 R3801 W044 W123 W196 SW2220 W121 W805 L101 W004 R3819 R3010 W021 W046 R3007 R627 X101 W197 Q3005 W003 W836 C645 W125 W124 C613_1 C609 C607 L604 W127 C625 C621 W198 W130 W863 W860 D102 SW2218 W200 W128 C618 W202 C604 C638 W131 W129 C629 W827 W822 W132 W203 W201 W048 W100 W098 SW2214 W204 W832 S804Y D3828 R3829 CP80 3A TP403 D3826 D3002 R646 C606 R602 W105 C630 W814 W812 C103 W174 W173 SW2216 W843 W099 W097 W096 W807 IC3002 Q402 W890 W109 W112 W107 W213 W108 W102 W101 W861 IC3001 W024 W023 W214 X602 D101 W175 C123 W176 D3001 D105 W114 W225 R3809 W113 R127 R603 S801X CP802B CP803B C101 D106 D3825 W181 W177 W115 W106 W185 W186 W182 SW2219 W178 W042 D806 L801_1 C627 R617 W187 W188 SW2217 W183 D805 W872 W871 D804 W184 C3013 W873 D3006 R909 W226 W879 W878 C923_1 SW2223 C907 C924_1 W880 D410 R433 C439 C401 W898 C432 D413 Q403 R404 R405 D3004 W817 _1 C626 SW2221 D3003 R408 W218 Q3008 C3001_1 R423 R3009 INFORMATION POUR SERVICE DES PIECE CRITIQUE, VOIR AU VERSO. Q401 C430 W169 FOR SERVICE INFORMATION ABOUT CRITICAL COMPONENTS, SEE INSIDE BACK COVER. CAUTION CP101 F-3 L401 C4 C418 D406 D408 C3028 Q805 01 W090 C410 CP805 CP806 TP023 R804 Q806 R651 D416 J8 Q804 R447 T401_1 Q405 R802 TP024 R911 R417 6 C417 R805 R806 CP401 W012 R456 C129 C341 C921 C941 R312 R313 R807 W171 C931 C925 C928 C936 C340 C127 C943 C926 C932 TP022 R429 R422 W013 R803 W011 CCE062B W074 IC353 W092 R912 R424 S804X C802 W852 IC352 W170 W168 R407_1 W078 W077 R415 10 W081 2 R4 D405 R402 R3 W079 W219 W156 R914 R916 R4282 W153 W172 W040 W804 W158 L902 D411 L402 W039 W038 R418 W080 W083 W916 W825 R4281 J2204 J2202 R403 HS401_1 W082 J2203 D404 W086 W085 R416 C357 W159 R421 VR402 IC401 W161 R124 W165 C407 D401 W087 C434 D403 C406 R411 CP302 R413_3 W167 W166 C2204 W160 R434_2 W041 J2201 R414 C2201 R2225 R2226 R467 C 45 0 C405 W088 CD3800 F-4 F-5 C337 C332 C338 C339 C342 IC902 R913 C938 Q3007 R2220 R101 C939 Q3804 R117 R138 R126 R109 1 C138 R114 R120 C110 IC 10 1 R157 R2217 R145 R149 R140 C111 R141 R144 R125 R123 C124 R115 34 R128 C102 R113 IC601 C107 C108 R110 C130_1 R119 R103 R142 R106 R148 C109 R2219 C641 R4221 Q2201 R2201 23 R2216 C3012 C3016 C3007 IC199_1 C937 C933 C935 IC103 C104 R628 R647 Q104 R910 C951 C950 C605_1 C633 R4201 C117 Q4203 C929 C934 R131 C631 C632 C601_1 R625 R616 R618 R619 R644 C616 C612 C334 C333 C008 R4207 R4206 Q4202 R4202 Q4204 C335 R305 C348 R308 R816 R813 C811 Q602 R809 R3008 R607 Q601 R611 Q605 R641 C628 CME066B C644_1 R605 C608 C001 C004 C4205 C003 R4242 Q4206 C809 R815 R643 R610 R609 C002 R4241 Q3003 R811 R814 C810 R3001 C3003 C4215 R4216 R3006 R3003 R3002 C3806 C4224 Q4201 R4210 R3011 R3012 C3802 C3805 C3809 PRINTED CIRCUIT BAORDS AV/CRT (CHIP MOUNTED PARTS) SOLDER SIDE Q4205 R147 R143 R2214 R2215 12 Q101 R136 R2218 R420 R428 R2221 R908 CCE062B F-6 PRINTED CIRCUIT BOARDS LOADING MOTOR (CHIP MOUNTED PARTS) SOLDER SIDE SOLDER SIDE SW1 LOADING MOTOR (INSERTED PARTS) CD2302 SW SOLDER SIDE SW2 D D0 0 CD2301 M2601 F-7 OR BLUE BL RE M2602 F-8 A B C D E F G H MPEG/MICON/DSP SCHEMATIC DIAGRAM (DVD PCB) C4034 6PCH C4035 18P CH 100 TP4007 R4069 4.7K B C4101 0.01 TP4008 FROM/TO REGULATOR TP4009 TP4010 W842 C4029 0.1 F STBY_L TP4017 TP4018 C4031 R4024 4.7K 0.01 B IAMCLK IABCLK IALRCLK R4025 220 3 AMCLK R4026 R4027 220 ABCLK 220 ALRCLK R4058 220 ASDATA0 SSCCLK W806 RDY[I/O[0]] W808 M_GND TP4014 VCC+6V TP4020 L4001 P.CON+A5V P.CON+5V DVD/VR 130mm DVD COMBO 250mm W850 TP4021 C4066 2.2uH 0305 1 MMZ1608R102CT 150 JG020 RDY[I/O[0]] R4014 C4026 SPDIF SPDIF EN VCC2 1 2 DVD-H 2.5 4.7K VCC1 GND 8 3 4 4.2 0 4.2 VO1 VO2 ADJ 5 6 7 3.3 1.8 0.1 F TP4024 P.CON+3.3V SSCRXD TP4001 SSCTXD TP4002 0.8 A B 5 P.CON+6V 6 P.CON+A5V 7 UNREG+3.8V 8 UNREG+3.8V 9 GND(A) 10 SPDIF 11 SSCRXD 12 SSCTXD 13 3 0.01 B C4080 C409010V100 KA F 47K 2 0.1 16V47 KA C4009_1 0.1 F 4 GND(M) PCB130 DME060 1 PIECES REPAREES PAR UN ETANT ATTENTION:LES DANGEREUSES AN POINT DE VUE SECURITE NOTE:THE DC VOLTAGE EACH PART WAS MEASURED WITH THE DIGITAL TESTER DURING PLAYBACK. C 3 RDY(I/O(0))/RX UNREG+3.8V TP4023 C4015 R4070 6.3V 100 KA B 100P CH TP4003 SD_D1 SD_D15 SD_D0 SD_D13 SD_D2 SD_D14 SD_D3 SD_D12 SD_D4 SD_D10 SD_D5 SD_D11 SD_D7 SD_D9 SD_D6 SD_D8 RAMCLK C4012 C4011_1 C4083_1 6.3V 100 KA F C4082 0.1 C4025 C4024 0.1 F 0.1 F 0.1 F C4023 100 100 0.1 F 100 R4008 C4022 R4064 R4059 NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE 2 SSCCLK/TX 3.9K +-1% MMZ1608R102CT UNREG+3.8V 1 GND(D) R4081 10V100 KA 10P CH C4100 R4071 GND(D) C4059 10V 100 KA B4010 TP4028 C4089 4 4.7K 330 +-1% +-1% MIC_ON (PM1) REG+3.3V +1.9V IC IC4003 BA33E00WHFP C4098 TP4022 TP4027 R4080 R4009 TP4015 TP4016 4 CD4002 (CP8001) CU2D2202 TP4012 TP4011 JG024 ASDATA1 ASDATA2 L4002 W5T29X7.5X19 TP4013 0.1 F (ICETCK) (ICETDO) (MUTEC) (ICETMS) JG021 (PM11) 5 GND GND ML TP4004 MC TP4006 MD TP4005 D1_2 D1_1 SYS_MUTE C4097 0.01 B 10 33 33 33 C4065 0.01 B C4030 C4081 0.1 F HOME C4036 0.1 B R4072 R4019 R4020 R4021 RESET C4084_1 C4027 0.1 F HOMEJG028 PM16 (MIC_DET) (DJTDO) I2C_CLK I2C_DAT R4018 P-H/I-L R4016 6.3V 47 KA 27MHz X4001 100GT02720 C4028 0.1 F 1M R4012 R4042 100 6.3V 47 KA 1 C4069_1 75 +-1% 75 +-1% R4002 75 +-1% R4003 R4005 W836 75 +-1% R4004 DAC_VIDEO_C DAC_VIDEO_B DAC_VIDEO_D B4006 (250mA) RAMWE# RAMDQM RAMRAS# RAMCAS# RAMCS0# SD_BA0 SD_A10 SD_A9 SD_A8 SD_A1 SD_A7 SD_A0 SD_A4 SD_A3 SD_A5 SD_A2 SD_A6 4.7K R4045 +-1% 6 2 1 G-1 TRAY_OPEN TRAY_CLOSE HOME TOUT_SW TIN_SW DVD/CD DRVSB RF OPU_A OPU_B OPU_C OPU_D OPU_E OPU_F VC SPDL_SENSSPDL_SENS+ DVD/CDPD DVD_LD CD_LD SPINDLE_PWM SLED_PWM TRACK_PWM FOCUS_PWM P.CON+A5V P.CON+3.3V VCC+6V M_GND 4.7K 820 NC 0.1 F 0.1 F C4018 C4078_1 1K W829 P.CON+3.3V F 0.1 F F C4075 C4076 0.1 C4072 0.1 C4071_1 6.3V 47 KA 6.3V 220 KA C4068_1 C4067_1 6.3V 100 KA C4070 0.1 F C4053_1 61 62 63 64 65 66 FROM/TO MOTOR DRIVE R4001 6.3V 100 KA 56 RAMADD(2) 3.3 3.3 3.3 3.3 3.3 0 3.3 3.3 3.3 3.3 3.3 0 3.3 3.3 0 3.3 0 0 3.3 0 0 0 0 3.3 GND (GND,D_GND) MMZ1608R102CT F 55 RAMADD(5) 6.3V 47 KA RFINN RFINP C4004 0.1 F B4018 MMZ1608R102CT TP4025 TP4026 C4086 0.001 B C4085 0.001 B (VR_DVD) (VR_CD) R4043 10K +-1% 10K +-1% 0.1 F C4088 +1.8V RF OPU_A OPU_B OPU_C SPDL_SENSOPU_D VC OPU_F SPDL_SENS+ OPU_E DVD_LD CD_LD DVD/CDPD DVD/CDPD DRVSB (MUTE-L) CH B4013 DVD/CD MMZ1608R102CT(DVD-L/CD-H) TOUT_SW TIN_SW 180P DUPTD0 DUPRD0 PWMCO(0) IDGPCI/O(4) GPCI/O(46) VDDPWM PWMCO(4) GNDPWM PWMCO(3) PWMCO(2) SPINDLEPULSE SLEDPULSE VDD-IP ICGPI/O(7) ICGPI/O(6) GNDP IDGPCI/O(3) VDDP ICGPCI/O(5) ICGPCI/O(4) GNDC GPCI/O(32) VDDC AGND1 AGNDREF DVD_LD CD_LD DVD_MD CD_MD RESOUT VBGAP VC F K E AGND J D H C AVDD SVDD B AVDD1 54 RAMADD(3) NC R4053 RAMRAS# RAMCAS# SD_BA0 RAMDQM RAMWE# RAMCLK 53 RAMADD(4) 2.9 3.3 3.3 3.3 1.8 0 RESET B4005 (130mA) TP4019 0 0 2.6 3.2 1.8 3.3 0 0 3.3 3.3 B4003 (250mA) (10mA) MMZ1608R102CT 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 0 3.3 1.8 3.3 0 3.3 3.3 3.3 3.3 3.3 0 3.3 3.3 3.3 3.3 3.3 3.3 0 3.0 3.3 3.3 0 3.3 3.3 3.3 3.3 3.3 3.3 3.3 0 3.3 1.8 3.3 0 3.3 3.3 3.3 3.3 3.3 0 3.3 3.3 3.3 1K 205 DUPRD1 MMZ1608R102CT VDDAFERF 0 0 1.3 1.1 3.3 1.2 1.4 3.3 1.4 7 P.CON+5V 0.1 C4016 0.1 F C4017 0.1 F 206 DUPTD1 0.1 F R4054 207 SSCCLK C4019 HD0 HA4 RD HA3 HA2 MEMCS0 HA1 HA0 208 SSCTXD GNDDACBS2 GNDDACP RSET C/B/U VDDDAC Y/R/V CVBS/C VDDDAC 160 A CVBS/G/Y 159 G Y/C 158 RFN GNDDACD GNDDACD 157 RFP GCLK XO VDDA RESET# GNDA GNDP VDDP IDGPCI/O(2) GPCI/O(31) DJTCK / ICGPCI/O(3) / VID(0) DJTO / GPCI/O(30) / VID(1) DJTDI / GPCI/O(29) / VID(2) DJTMS / GPCI/O(28) / VID(3) MPEG/MICON/DSP/RF_AMP IC VDDC GNDC IC4001 GPCI/O(27) ZR36862PQCG-B IDGPI/O(1) ICGPCI/O(2) GPCI/O(26) VDDP ICGPCI/O(1) GNDP HSYNC VSYNC AIN VDDP-A2 AMCLK 100 RAMDAT(14) GNDP-A2 101 GNDP ABCLK ALRCLK 102 RAMDAT(1) GPAI/O 103 RAMDAT(15) AOUT(0) AOUT(1) 104 RAMDAT(0) AOUT(2) SPDIF IDGPCI/O(0) ICGPCI/O(0) GNDP GPCI/O(20) VDDP 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 AMCLK MD MC ML P-H/I-L B4002 (120mA) C4052 C4014 0.1 F VDDDAC B4001 MMZ1608R102CT (10mA) C4007 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 HD2 HA17 HD9 HA7 HD1 HA6 HD8 HA5 R4022 R4063 HD10 HA18 SSCRXD MEMCS(1) VDDP MEMAD(15) MEMAD(16) MEMAD(14) MEMAD(13) MEMAD(12) MEMDA(15) MEMAD(11) MEMDA(7) GNDP MEMAD(10) MEMDA(14) MEMAD(9) MEMDA(6) MEMAD(8) MEMDA(13) MEMDA(5) MEMAD(20) VDDP MEMDA(12) MEMWR# MEMDA(4) VDDC MEMDA(11) MEMDA(3) MEMAD(19) GNDC MEMDA(10) MEMAD(18) GNDP MEMDA(2) MEMAD(17) MEMDA(9) MEMAD(7) MEMDA(1) MEMAD(6) MEMDA(8) MEMAD(5) VDDP MEMDA(0) MEMAD(4) MEMRD# MEMAD(3) MEMAD(2) MEMCS(0)# MEMAD(1) MEMAD(0) GNDP VDD-IP VDDP 53 54 55 56 57 58 59 60 (W834) (AFEGND) VDDPWM +1.8V +3.3V RAMADD(6) VDDP RAMADD(1) RAMADD(7) RAMADD(0) GNDP RAMADD(8) VDDC RAMADD(10) GNDC RAMADD(9) VDDP RAMADD(11) RAMCS(0)# RAMBA(1) RAMBA(0) GNDP RAMCS(1)# RAMRAS# RAMCAS# VDDP RAMWE# RAMDQM GNDPCLK PCLK VDDPCLK RAMDAT(8) GNDP RAMDAT(7) RAMDAT(9) RAMDAT(6) VDDP RAMDAT(10) RAMDAT(5) RAMDAT(11) GNDP RAMDAT(4) VDDC RAMDAT(12) GNDC RAMDAT(3) VDDP RAMDAT(13) RAMDAT(2) F C4057 JG029 DUPTD1 DUPRD1 DUPTD0 DUPRD0 FOCUS_PWM 3.3 3.3 3.3 3.3 3.3 3.3 3.3 F C4013 0.1 HD11 HD3 HA19 SD_D0 SD_D1 SD_D2 SD_D3 SD_D4 SD_D5 SD_D6 SD_D7 SD_D8 SD_D9 SD_D10 SD_D11 SD_D12 SD_D13 SD_D14 SD_D15 RAMCS0# 15K R4050 4.7K C4010 0.1 HD12 WR HD4 52 51 50 49 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 HD0 HD1 HD2 HD3 HD4 HD5 HD6 HD7 HD8 HD9 HD10 HD11 HD12 HD13 HD14 HD15 C4077 2 F HA10 HD14 HA9 HD6 HA8 HD13 HD5 MEMCS0 RD WR SD_A0 SD_A1 SD_A2 SD_A3 SD_A4 SD_A5 SD_A6 SD_A7 SD_A8 SD_A9 SD_A10 3 0.1 HA15 HA16 HA14 HA13 HA12 HD15 HA11 HD7 3.3 3.3 NC 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 0 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 NC 3.3 3.3 3.3 3.3 1.8 3.3 3.3 3.3 0 3.3 3.3 0 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 3.3 0 3.3 3.3 DVD-H DAC_VIDEO_C DAC_VIDEO_B DAC_VIDEO_D ASDATA0 ABCLK ALRCLK W837 208 207 206 205 204 203 202 201 200 199 198 197 196 195 194 193 192 191 190 189 188 187 186 185 184 183 182 181 180 179 178 177 176 175 174 173 172 171 170 169 168 167 166 165 164 163 162 161 160 159 158 157 6.3V 100 KA 4 C4008 0.1 F 5 4.7K 4.7K 4.7K GND P.CON+3.3V HA0 HA1 HA2 HA3 HA4 HA5 HA6 HA7 HA8 HA9 HA10 HA11 HA12 HA13 HA14 HA15 HA16 HA17 HA18 HA19 R4077 R4033 FROM/TO MEMORY 6 4.7K R4078 0.001 B B4016 MMZ1608R102CT 4.7K 4.7K R4039 R4051 4.7K 4.7K R4038 R4037 P.CON+5V SYS_MUTE 0.001 B C4032 C4020 DUPRD0 JG009 R4036 7 4.7K C4096 FROM/TO AUDIO/VIDEO 3.3 3.3 0 3.3 3.3 3.3 3.3 3.3 3.3 3.3 0 3.2 3.3 3.3 0 0 3.1 1.8 0 0 3.1 3.1 0.3 0.3 1.3 1.3 2.2 2.4 2.1 2.3 0 3.5 2.4 0 2.3 3.3 3.3 2.4 3.3 2.4 0.1 1.6 1.8 DUPTD0 JG008 DUPTD1 1SS355 1SS355 DUPRD1 JG007 R4052 D4007 JG006 D4006 JG005 1SS355 BOOT1 D4005 IRRCV JG004 1SS355 1SS355 1SS355 BOOT2 D4004 D4003 D4002 JG003 JG030 UNREG+3.8V JG002 FPCSTRB P.CON+5V JG001 JG033 SSCRXD JG032 SSCTXD JG031 SSCCLK 0.01 B B4012 MMZ1608R102CT 8 C4038 B4014 FS1 C4001 0.0012 B JG023 MMZ1608R102CT FS2 B4009 JG022 MMZ1608R102CT C4002 0.1 F R4061 11K SPINDLE_PWM C4003 0.027 B SGND R4060 11K SLED_PWM B4011 R4062 39K TRACK_PWM MMZ1608R102CT TRAY_OPEN C4056 0.027 B TRAY_CLOSE C4033 0.1 F 8 THESE PARTS MARKED BY CAUTION:SINCE CRITICAL FOR SAFETY,USE ONES N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES D E ARE DESCRIBED IN PARTS LIST ONLY F G H G-2 A B C D E F G H MEMORY SCHEMATIC DIAGRAM 8 8 (DVD PCB) FLASH IC 8M IC4007 SST39VF1601-70-4C-EKE 2.5 R4040 HA0 B4007 MMZ1608R102CT 50 A0 A1 2 3 12 3.3 13 4 11 3.3 3.3 14 5 10 0 3.3 RAMDQM 15 6 7 8 9 3.3 3.3 RAMWE# 16 VDDQ NC UDQM CLK CKE NC SD_A9 3.3 A9 SD_A8 3.3 A8 SD_A7 3.3 A7 SD_A6 3.3 A6 SD_A5 3.3 A5 SD_A4 3.3 A4 0.1 F C4039 VDDQ LDQM 3.3 RAMCAS# 3.3 RAMRAS# 3.3 RAMCS0# 3.3 SD_BA0 3.3 SD_A10 3.3 SD_A0 3.3 SD_A1 3.3 SD_A2 3.3 6 NC 0.1 F SD_D4 SD_D5 SD_D6 SD_D7 C4046 5 0.1 F 0 R4041 RAMDQM 15 16 17 18 19 20 21 22 DQ7 3.3 17 A2 DQ8 3.3 18 3.3 38 CE# A3 DQ6 SD_D3 C4045 19 46 44 43 34 33 32 31 30 29 GND A4 23 2.6 FLASHCS OE# 24 0 A5 28 2.6 DQ0 27 RD A7 A6 26 1.6 DQ1 A17 DQ8 25 HD0 DQ9 A18 DQ9 3.3 SD_D2 20 C4041 3.3 2.3 4.7K DQ2 VSSQ 3.3 21 SD_D8 RESET 0.1 A19 VSSQ 37 9 10 11 WR 0 DQ10 DQ5 36 0.9 HA19 SD_D9 3.3 0 DQ10 3.3 SD_D1 0.1 F 35 HD8 (W837) 0 NC 0.1 DQ4 34 1.4 WP# 3.3 DQ11 33 HD1 DQ3 3.3 VDDQ 32 HD9 1.4 VPP 3.3 VDDQ 31 HD2 1.2 DQ11 3.3 DQ3 30 HD10 1.3 RP# SD_D10 DQ12 29 1.6 WE# VCC 3.3 DQ2 28 HD3 DQ4 SD_D11 DQ13 27 1.6 A20 HA8 12 0.1 F HD11 DQ12 A19 3.3 13 3.3 DQ5 C4040 14 1.6 40 HD4 39 0.8 38 HD12 37 0.7 7 SD_D0 22 3.3 SD_D12 0.1 F VSSQ 3.3 0.1 F 1.5 0 36 HD5 A10 35 0.6 HD13 DQ14 C4050 23 1.2 A11 VSSQ 3.3 HA19 (W838) 1.6 RAMCLK 5 47K RAMCKE HA17 1.4 HA7 1.6 HA6 HA5 1.3 HA4 1.7 HA3 2.5 HA2 1.6 HA1 /RAS /CS BA A10/AP A0 A1 A2 A3 0 NC 1.6 /CAS 3.3 R4048 HA18 0.7 /WE 0 VSS VDD 25 HD6 DQ7 3.3 24 HA9 3.3 SD_D13 49 1.3 A12 48 HD14 DQ15 47 HA10 3.3 DQ1 46 1.9 A13 DQ14 45 HD7 GND DQ0 44 0.7 DQ15 43 A8 HA11 3.3 42 7 DQ13 HA12 SD_D14 41 A9 HA13 3.3 40 DQ6 1.6 8 HD15 VDD 39 6 1.3 HA14 SD_D15 26 1 2 3 4 5 2.5 A14 HA15 C4109 HD0 HD1 HD2 HD3 HD4 HD5 HD6 HD7 HD8 HD9 HD10 HD11 HD12 HD13 HD14 HD15 MEMCS0 RD WR 3.3 4 SD_A3 C4047 0.1 F 3 6.3V 100 KA C4021 0.1 F C4106 F C4074 0.1 C4044 6.3V 100 KA C4063 6.3V 220 KA C4099 C4095 0.01 B B4008 MMZ1608R102CT P.CON+3.3V 0.01 B 3 1.5 VCCQ 45 0 HA0 HA1 HA2 HA3 HA4 HA5 HA6 HA7 HA8 HA9 HA10 HA11 HA12 HA13 HA14 HA15 HA16 HA17 HA18 HA19 4 0.8 A15 VSS 0.1 F 0.1 F C4062 5 1.0 48 3.3 A16 47 C4064 42 HA16 0 1.7 4.7K 6 1.2 41 SD_A0 SD_A1 SD_A2 SD_A3 SD_A4 SD_A5 SD_A6 SD_A7 SD_A8 SD_A9 SD_A10 SD_D0 SD_D1 SD_D2 SD_D3 SD_D4 SD_D5 SD_D6 SD_D7 SD_D8 SD_D9 SD_D10 SD_D11 SD_D12 SD_D13 SD_D14 SD_D15 RAMCS0# RAMRAS# RAMCAS# SD_BA0 RAMDQM RAMWE# RAMCLK 7 1 16M SDRAM IC4009 M12L16161A-7TG FROM/TO MPEG/MICON/DSP GND FROM AUDIO/VIDEO 2 2 W854 RESET MEMCS0 NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE 1 A G-3 PCB130 DME060 B C NOTE:THE DC VOLTAGE EACH PART WAS MEASURED WITH THE DIGITAL TESTER DURING PLAYBACK. D E F 1 G H G-4 A B C D E F G H MOTOR DRIVE SCHEMATIC DIAGRAM 8 8 FROM/TO MPEG/MICON/DSP DVD/CD VC DVD/CDPD (VR_CD/VR_DVD) (DVD PCB) DVD/CD DVD_LD CD_LD DVD/CDPD RF OPU_A OPU_B OPU_C OPU_D OPU_E OPU_F VC HOME GND GND R2359 C2318 0.001 B C2343_1 6.3V 47 KA F C2342 0.1 F C2347 0.1 C2346_1 6.3V 47 KA F 390 R2336 10K R2334 1K R2324 33K R2319 TP2320 3.3K TRAY_OPEN R2335 4.7K R2327 TP2318 5.6K R2326 TP2319 27K R2321 16 2.6 19 6.0 21 1.6 10K TP2316 R2337 VIN 1 VIN1-A NC VIN220 0 4 1K 23 VIN2+ 24 R2330 0 NC 1.6 25 VIN1+A 18 VCCS NC 17 0 NC 6.0 0 26 VIN2 27 VIN3- VD1+ 15 2.6 28 VIN3 VO_OP VIN-OP 14 1.7 0 NC 1.8 1.6 29 VD1- VD2- VD2+ 13 3.5 30 TP2317 12 0 31 VIN+OP REG-IN PGND1 11 0 0 NC 1.6 1.6 32 VCC1 10 2.8 0 33 NC 9 2.5 NC REG-OUT S-GND VREF-OUT 8 2.6 34 PGND2 C2360 100P CH 100P CH C2357 100P CH 7 2.6 0 NC 6.0 NC 35 22 1.6 3 R2325 100 MOT_SLED6.8K MOT_SLED+ R2328 2.2 C2303 0.1 B R2304 2.2 1K R2358 120 100 +-1% B R2302 0.1 C2365 R2357 D2303 1SS355 0.1 B C2307 0.1 B 1.2 1.2 R2329 2 JG058 MOT_SLED+ R2323 MOT_SLED- MOT_SPDL- MOT_SPDL+ FO- FO+ TR- TR+ MOT_LD+ MOT_LD- JG057 C2305 D2304 1SS355 0.1 B 2 C2302 R2303 0.022 B 0.1 B 4.7K C2304 C2313 C2310_1 MOT_SPDL+ 10V 100 KA MOT_SPDL10V 100 KA SP1+ 6 0.5 36 C2314_1 SP1- 1 5 37 0.1 F 2 4 0 NC 0.5 0 NC 1.6 1.6 38 C2306 SLD+ 6.0 HOME 39 40 TP2315 SLD- 3 3 2 0 0 NC 1.6 1.6 41 TP2314 4 1 0 3.1 42 TP2313 LIMIT SW B2305 short --- +3.3V 3.1 43 TP2312 5 TP2306 R2349 4.0 44 C2301 SW(GND) 100P CH C2358 6 0 MMZ1608R102CT C2359 3 B2305 MOTOR DRIVE IC IC2301 LA6565VR-TLM-E 4.7K 4.7K R2351 R2350 TP2304 4.7K R2342 FROM/TO LOADER TRAY_CLOSE TP2324 4.7K TP2305 P.CON+3.3V CP2303 00_6232_006_006_800+ 0.1 R2338 100 4 4.7K B TIN_SW 5 SPDL_SENSTP2323 VC2 VD3- CLOSE 1 6.8 VD3+ GND(D) R2341 R2310 C2348 R2353 TOUT_SW 100 R2352 JG019 TP2311 1 MOT_LD+ SPDL_SENS+ 4.7K VREF-IN OPEN 6.8 6.3V 47 KA MOT_LD- R2320 VD4- LD+ 3 2 C2328_1 TRACK_PWM TP2310 4 CD LD CTL 1.0 R2333 3.9 Q2302 2SA2048 220 4.5 R2340 OPU_VREF TP2303 LD- 6.3V 100 KA MMZ1608R102CT 4.7K TP2308 VIN4 CP2302 00_6232_005_006_800+ C2341_1 10K F R2313 MMZ1608R102CT R2305 B2302 VD4+ 0.1 TO LOADER M_GND B2301 JG012 C2331 TP2309 GND(PDIC) 1.2K 75K 24 C2340_1 6.3V 100 KA NC Vref OPU_E VLD+ VCC 23 OPU_F JG014 VCC+6V R2339 VIN4- 22 JG015 3.3K VLD- E DVD/CD 0 Q2304 KTC3875S_Y_RTK FOCUS_PWM TP2322 F 21 OPU_D SLED_PWM TP2307 R2347 0.7 R2307 20 JG013 0.1 SPINDLE_PWM 220 1.0 TP2321 D OPU_A 0.1 3.3K 1K 19 JG010 0 6.8 R2332 3.9 MUTE234 A OPU_B R2318 4.5 NC 18 JG011 0.7 DVD LD CTL Q2301 2SA1036K R2301 B OPU_C 3.3K F 17 JG040 R2346 0 0.1 C RF W843 RF 16 JG016 R2360 15 DVD_CD 10K DVD/CD 6 DRVSB 6.8 MUTE1 MON(COM) 14 B2303 VCC2 13 VR DVD Q2305 KTC3875S_Y_RTK 0.1 R2348 DVD/CDPD P.CON+A5V TRACK_PWM FOCUS_PWM P.CON+3.3V MMZ1608R102CT R2309 GND(CD) R2306 VR DVD Q2303 KTC3875S_Y_RTK 0 82 7 TOUT_SW TIN_SW MMZ1608R102CT 100 +-1% VR/CD 0.1 F C2315 5 C2332 CDLD JG018 R2308 VOL(CD) JG017 VCONT LD(CD) 11 DVDLD REV 10 JG056 B2304 6.3V 47 KA LD(DVD) RF_A5V FWD GND(DVD) 9 VR/DVD F 8 NC 0.1 C2327_1 VOL(DVD) C2326 NC(SW) 7 12 5 MON(DVD) 6 C2329_1 6 (RF_GND) FO+ DVD/CDPD 6.3V 47 KA 5 FO- 82 F+ R2356 4 TR+ 1K F- R2355 3 TR- 33 T+ 1B T- 2 C2309 1 DVD_LD CP2301 LD07T2-24ND-03 CD_LD FROM/TO LOADER 7 PCB130 DME060 1 NOTE:THE DC VOLTAGE EACH PART WAS MEASURED WITH THE DIGITAL TESTER DURING PLAYBACK. NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE A G-5 B C THESE PARTS MARKED BY CAUTION:SINCE CRITICAL FOR SAFETY,USE ONES PIECES REPAREES PAR UN ETANT ATTENTION:LES DANGEREUSES AN POINT DE VUE SECURITE DESCRIBED IN PARTS LIST ONLY N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES D E 1 ARE F G H G-6 A B C D E F G H AUDIO/VIDEO SCHEMATIC DIAGRAM 8 8 (DVD PCB) 7 7 FROM/TO MPEG/MICON/DSP C8106 C8104 P.CON+5V 12P CH L8102 150P CH DAC_VIDEO_B 1uH 0305 9 150P CH DAC_VIDEO_C DAC_VIDEO_C W818 DAC_C_VIDEO C8105 6 6 C8108 DAC_VIDEO_B C8109 12P CH L8103 150P CH C8107 W819 1uH 0305 DAC_B_VIDEO 10 150P CH RESET MC MD ML AMCLK ABCLK ALRCLK ASDATA0 TP8101 P-H/I-L DVD-H SYS_MUTE 5 TP8102 P-H/I-L NC TP8103 NC TP8104 NC TP8105 GND TP8106 RESET ZERO D8111 5 W826 TP8107 1SS355 TP8108 W824 R_AUDIO TP8109 L_AUDIO RESET TP8112 DAC_C_VIDEO TP8113 DAC_D_DVD_VIDEO TP8114 D8112 1SS355 C8122 SYS_MUTE B8103 TP8111 4 0.001 B C8119_1 6.3V 100 KA FROM MEMORY 0.1 4 F C8120 TP8110 DAC_B_VIDEO MMZ1608R102CT C8114 R8113 1 B C8125 470 1 B C8113 R8112 1 B C8126 470 1 3 6 7 FROM/TO REGULATOR B FFC(1.0mm pitch) 3 CD8101 2F0C1602 NC ML CP8101_3 (CP8002) IMSA-9604S-12F 1 BCK 1.6 SCK DATA LRCK 14 15 16 0 3.3 1.7 EXT_MUTE 12 DVD RESET 11 ZERO 10 AUDIO-R 9 GND 8 AUDIO-L 7 GND 6 Y 5 GND C 4 GND 2 CVBS 1 2 3 ALRCLK DGND 2 ASDATA0 ZERO 0 NC 1.1 ABCLK 3.3 3 AMCLK 2.4 13 0 1.6 ML ZEROL/NA 12 4 MC ZEROR/ZEROA 11 0 MD VCOM 10 2 6.3V 100 KA 5 9 0 C8121 3.3 MC VOUTL 6 VDD 4.9 AGND STEREO DAC IC IC8102 PCM1753DBQR 7 MD 2.5 VOUTR 8 VCC 2.4 PCB130 DME060 1 1 NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE A G-7 B C NOTE:THE DC VOLTAGE EACH PART WAS MEASURED WITH THE DIGITAL TESTER DURING PLAYBACK. D E F G H G-8 A B C D E F G H REGULATOR SCHEMATIC DIAGRAM 8 8 (AV PCB) P.CON+5V_REG IC3002 KIA278R05PI 7 IN OUT 1 2 FROM POWER 5.6 5.0 GND SW 3 4 0 7 2.8 R3013 UNREG+5V UNREG+5V POWER_ON_H 1.5K R3012 16V 220 YK B C3004 C3003 0.1 NC GND UNREG+12V 6 C3017 HS3001 763WSA0029 P.CON+5V 16V 100 YK W890 W889 W844 NC 1K 1/4W TO SOUND AMP P.CON+9V MOTOR+6V_REG UNREG+8V P.CON+5V(DVD) IC3001 BA00BC0WT-V5 GND 5.5 R3005 5.2 6 UNREG+3.8V 1.8 3W 4.8 DRIVER Q3001 KTA1281_Y R3015 1 D3004 UNREG+8V MOTOR+B[+6V] 2 2.7 W817 GND 7.5 OUT 3 0 4 6.2 10K 1/4W FB R3017 IN 1K 1/4W SW 5 1.3 4.0 1N4002-PAN TO CHROMA DVD_Y DVD_C P.ON SW Q3003 KRC102SRTK D3006 POWER_ON_H R3003 2.2K +-1% C3002 +-1% 10V 2200 YK C3001_1 DVD_RDY GND(M) 5 GND(A) 11 SPDIF 12 SSCRXD 13 SSCTXD POWER_ON_H R3010 UNREG+12V 11.9 9.0 P.CON+9V 33 1/2W 9.6 DRIVER Q3005 KTC3209_Y P.CON+5V (DVD) R3007 UNREG+3.8V 100 1/4W D3002 SPDIF DVD_DATA_OUT DVD_DATA_IN 12.6 UNREG+12V C3030 10 1K C3023 UNREG+3.8V 1.5K 25V 10 KA UNREG+3.8V 9 R3011 F 8 R3006 0.1 P.CON+A5V C3016 P.CON+6V 7 C3007 6 4 FROM/TO MICON/TUNER 12.6 11.9 DVD_RESET DRIVER Q3002 KTA1281_Y R3008 DVD_CLK DVD_RDY R3004 FROM/TO AUDIO/VIDEO CP8002 (CP8101_3) IMSA-9604S-12C 2 C GND TO IN/OUT DVD_Y 8 Y 7 GND 6 AUDIO-L 5 GND 4 AUDIO-R 3 ZERO 2 DVD RESET 1 DRIVER Q3008 KTC3203_Y DVD_A_OUT_L P.CON+5V W859 UNREG+8V 8.0 DVD_A_OUT_R ZERO R3009 UNREG+12V AT+5V SPDIF 3.6 220 1/2W DVD_RESET P.CON+9V AT+5V 5.0 EXT_MUTE C3013 9 POWER_ON_H 0 DVD_C D3003 10 AT+5V POWER_ON_H 4.6 DVD_A_OUT_L 10V 100 YK GND 3 P.CON+5V 25V 10 KA 11 NC DVD_DATA_IN C3028 NC DVD_DATA_OUT P.ON SW Q3007 KRC102SRTK MTZJ5.6B-EIC 12 0 1K 1/4W 10K 3 1N4002-PAN 16V 100 YK SSCCLK/TX 0.1 B 4 10V 470 YK C3012 0.1 B C3011 DVD_CLK 4 RDY(I/O(0))/RX 5 +-1% 4.7K 11E1-EIC 0 MTZJ10B-EIC 3 3.9K R3002 GND(D) S802Y 2 10V 2200 YK C3010 CP8001(CD4002) A2001WV2-13P 1 GND(D) 10V 2200 YK FROM/TO MPEG/MICON/DSP R3001 P.CON+5V P.CON+8V 0 5 D3001 2 DVD_A_OUT_R ZERO PCBD20 CME066 1 NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE A G-9 B NOTE:THE DC VOLTAGE EACH PART WAS MEASURED WITH THE DIGITAL TESTER DURING PLAYBACK. C PIECES REPAREES PAR UN ETANT ATTENTION:LES DANGEREUSES AN POINT DE VUE SECURITE N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES D THESE PARTS MARKED BY CAUTION:SINCE CRITICAL FOR SAFETY,USE ONES CAUTION: DIGITAL TRANSISTOR ARE 1 DESCRIBED IN PARTS LIST ONLY E F G H G-10 A B C D E F G H 17 VIDEO OUT 16 IF OUT 15 BT 14 SIF OUT AUDIO OUT 13 12 AFT OUT 11 DATA 9 +B 10 CLOCK 8 FSC IN 7 5 4 3 19 2 (AV PCB) 1 8 TU001 115-V-KA35ARE MICON /TUNER SCHEMATIC DIAGRAM 8 20 FROM/TO IN/OUT 21 18 0 NC 0 NC 0 0 NC 0 3.7 NC 4.8 NC 4.6 4.5 4.5 0 0 32.1 NC W818 C008 0 0 NC SCL SDA I2C_OFF W823 W828 0.01 B REMOCON KEY_A 5.2 0 0.1 F TUNER_VIDEO +30V C001 TUNER_AUDIO 100 1/4W 100P CH 7 C003 AFT C004 100P CH C006 10V 100 YK B SDAR003 POWER_FAIL 100 1/4W 3 SCL R004 2 P.CON+5V 1 5.2 10K SW Q104 4.1 KTA1504S_Y_RTK 4.7 POWER_ON_H FROM/TO STEREO SCL GND SDA IN VIDEO_OUT 5.2 OUT FSC_OUT R119 0.1 NC NC IC103 PST3231NR RESET IC 0.3 L001 0.2 7 NC 4 C002 100uH 0607 KEY_B NC 5 TUNER_AUDIO SCL 24 2 3 4.7K R157 4.7K R149 4.7K R148 6 0.1 C109 B C111 270P CH 56uH L101 1SS133 FROM/TO CHROMA R140 W805 4.7K 23 4.7K X101 W863 CSTLS16M0X53-A0 22 R125 D102 MTZJ5.6B-EIC D106 R115 10K R103 10K R101 1SS133 4.7K R110 D101 6 10K REMOCON R123 W814 W812 SDA 1 OSD_Y R144 100 1.5K OSD_B R141 OSD_G R145 1.5K OSD_R 1.5K 25 SDA SCL SYNC_VIDEO 23 NC 10 2.1 11 0 20 19 5.1 0 NC 0 +30V E0_LEAK POWER_ON_H X-RAY FROM/TO POWER 5.1 ST_BY_HI GND FROM/TO REGULATOR DVD_RESET SCL SDA R142 4.7K 4.7K R114 100 R147 SCL A G-11 B C D 100K VOL_PWM R124 C129 47K R131 0 C127 C123 VCC 2 0 100 50V 4.7 KA 47K 8 E0 MODE E1 3 0 5.1 7 50V 10 KA POWER_ON_H1 2 50V 1 YK A_MUTE1 POWER_ON_H PCBD20 CME066 1 0 THESE PARTS MARKED BY CAUTION:SINCE CRITICAL FOR SAFETY,USE ONES PIECES REPAREES PAR UN ETANT ATTENTION:LES DANGEREUSES AN POINT DE VUE SECURITE ARE 1 DESCRIBED IN PARTS LIST ONLY N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES E SCL 4 0 NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. 0 6 E2 SDA VSS MEMORY IC IC199_1 AT24C04N-10SU-2.7 D110 4.0 5 B 0.001 C110 100P CH C130_1 1SS133 1SS133 NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE R128 VOL_PWM1 MUTE SW 68K 1/4W Q101 KTC3875S_Y_RTK 0.6 R136 R138 0 4.0 1 10V 100 YK C119 0.01 B SDA C117 KEY_B KEY_A H_CONTROL 0.1 F C138 FROM/TO SOUND AMP D109 1SS133 D111 3 AT+5V P.CON+5V AFT E0_LEAK R117 POWER_ON_H DVD_CLK DVD_RDY DVD_DATA_OUT DVD_DATA_IN DVD_RDY DVD_DATA_IN DVD_CLK DVD_DATA_OUT 1M R126 4.7K R120 R106 4.7K 4.7K R109 R113 ST_BY_HI VOL_PWM1 POWER_ON_H DVD_RESET A_MUTE1 2 4 POWER_FAIL 5.1 100 9 0 0 NC R143 E0 LEAK IN 8 5.1 0 4.7K 7 4.7 HD FROM/TO DEFLECTION I2C_OFF 6 0.6 DVD CLOCK DVD DATA OUT DVD DATA IN 5 5.0 VD 0 4.7K 4 0 H CONTROL AFT 1.2 DVD RDY STANDBY HI 3 2 4.8 IIC BUS OFF X-RAY IN 1 12.KEY1 13.KEY2 AV1 VOLUME PWM TV POWER 43.TV MUTE 44.NC 18 OSD R 5 FSC_OUT W860 0 17 OSD G 0 16 21.OSD Y/BLK 22.H-SYNC VIDEO_OUT 3.9 15 34.SDA 35.VSS 14 PROTECT TUNER_VIDEO 26 22 24 21 XOUT 25 V-SYNC RESET 26 OVDD POWER FAIL 4.8 OSD B 1/4W PROTECT 5.1 PROTECT 27 OVSS 28 0 XIN 29 0 TEST 30 2.2K R127 D105 1SS133 2.1 13 DVD POWER 3.3 3 2.3 12 VSS NC 31 REMOCON SD 34 35 36 MICON IC 0 IC101 OEC6087A VDD 44 0 NC 43 5.1 NC 0.2 37 0 4 38 5.1 VIDEO IN2 39 0 NC 0.1 F 5.1 5.1 4.7 VIDEO IN1 40 3.1 32 41 3.0 33 42 0 0 DVD RESET 0.01 B C103 C102 6.3V 220 KA 4.6 0 SCL B C108 H_CONTROL 0.1 B C107 0.1 B C104 0.1 5 10V 33 KA C101 C124 F G H G-12 A B C D E F G H SOUND AMP SCHEMATIC DIAGRAM (AV PCB) 8 8 FROM MICON/TUNER VOL_PWM POWER_ON_H1 C342 4.0 0.1 B 5 6 7 8 - 0 C341 50V 10 KA C340 50V 10 KA C357 4.0 6 25V 2200 YK 6 7.6 SOUND AMP IC IC353 AN7513 SOUND AMP IC IC352 AN7513 GND + 3 3.8 2 4.0 0 1 1.3 C339 0 0.1 B 5 + 3 6 3.8 SOUND_GND 4.0 7 1.3 3W 0.6 7.6 8 2.2 - R310 SOUND+B 2 0 FROM POWER 1 0.6 4 7 4 7 FROM CHROMA 5 SW_A_OUT_L B 0.1 C338 C335 330P CH R312 51 R305 18K 1/4W SW_A_OUT_R 5 35 36 10K R313 50 18K 1/4W C348 R308 330P CH W852 10K TO SPEAKER 4 CP302 213213102W1 C337 C332 470P 470P CH CD302 CU123801 SP OUT R+ 1 1 SOUND GND 2 2 CP301 C334 470P CD301 CU123801 213213102W1 470P CH SP OUT L+ 1 1 SOUND GND 2 2 4 SP352 YDP47-6 8 OHM CH C333 3 R CH SPEAKER L CH SPEAKER SP351 YDP47-6 8 OHM CH 3 FROM/TO IN/OUT SP_OUT_L SP_OUT_R SP_OUT_R2 SP_OUT_L2 SOUND_GND 2 2 PCBD20 CME066 1 NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE A G-13 B NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. C THESE PARTS MARKED BY CAUTION:SINCE CRITICAL FOR SAFETY,USE ONES PIECES REPAREES PAR UN ETANT ATTENTION:LES DANGEREUSES AN POINT DE VUE SECURITE DESCRIBED IN PARTS LIST ONLY N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES D E 1 ARE F G H G-14 B C D E F IN/OUT SCHEMATIC DIAGRAM G D2201 AT+5V R2201 (AV PCB) 8 H 220 LTL-1CHEE-002A A OS2202 ROM-N3138SR 8 1 Vout 2 B+ 5.0 3 GND POWER_ON_H 5.0 0 SOUND_GND SW Q2201 KRC103SRTK KEY_B L4202 0305 R2219 1K 1.5K SW2223 EVQ21505R SKIP REW SW2221 EVQ21505R SKIP FF SW2219 EVQ21505R PLAY R2217 7 SW2220 EVQ21505R VOL DOWN VOL UP SW2218 EVQ21505R STOP SW2217 EVQ21505R 5.6K 820 100 1/4W 6 R2225 GND 2 1 NC 3 E NC H 2 1 NC 3 E FRONT AUDIO JACK J2204 MTJ-032-05A-31-FE 16V 220 YK NC H WHITE YELLOW H 2 1 NC 3 E RED 82 1/4W C2201 CH W820 R4221 3.3K R4210 C4224 330P 16V 220 YK C2204 R2226 1 SP_OUT_L2 82 1/4W W5RH3.5X5X1.0 SP_OUT_L FRONT AUDIO JACK J2203 MTJ-032-05A-32-FE SP_OUT_R E 0.1 B FRONT VIDEO JACK J2202 MTJ-032-05A-30-FE SP_OUT_R2 B4201 2 C4215 68 R4242 FROM/TO POWER R4216 1.2 0.022 B 10V 100 YK C4205 C4204 VIDEO_OUT COAXIAL J4201 MSP-251V-05NI-FE-LF D AUDIO DRIVER Q4201 KTC3875S_Y_RTK 1.6 2.2K 1/4W FRONT_VIDEO 5 4.9 R4205 DVD_A_OUT_R2 100K DVD_A_OUT_L2 R2221 2.7K FRONT_VIDEO 220 FROM/TO CHROMA R2220 100 1/4W H R4241 FRONT_A_IN_L 1.5K 100uH 6 R4282 R2218 1.5K R2215 R4281 FRONT_A_IN_R SW2215 EVQ21505R KEY_A FRONT_A_IN_R OPEN/CLOSE FRONT_A_IN_L CH UP AUDIO_OUT_R SW2216 EVQ21505R SW2213 EVQ21505R GND 1K POWER ON/OFF AUDIO_OUT_L R2216 820 SW2214 EVQ21505R C4201 FROM/TO STEREO R2214 CH DOWN 100 1/4W W825 7 R4203 AT+5V 16V 47 YK W804 REMOCON 5 FROM/TO REGULATOR 1 5 4 3 2 6 7 P.CON+5V AT+5V P.CON+9V SPDIF DVD_A_OUT_L DVD_A_OUT_R HEADPHONE_JACK J2201 MSJ-2000_AG KEY_A KEY_B POWER_ON_H SCL I2C_OFF VIDEO_OUT P.CON+9V DVD_A_OUT_R2 DVD_A_OUT_L2 FROM/TO MICON/TUNER 4 SDA ZERO 4 TEST POINT CP101 A2001WV2-9P SCL SDA REMOCON I2C_OFF 3 W821 SP_OUT_L SP_OUT_R 0 DVD_A_OUT_R 0 3.7 0 MUTE SW Q4205 KRC104SRTK 37 NC 5.0 R4207 10K R4206 3.7 0.6 ZERO SOUND_GND SP_OUT_L2 4.7K R4204_1 FROM/TO SOUND AMP 1/4W DVD_A_OUT_L 1.8 3.3K MUTE SW Q4202 DTA143EKA MUTE SW Q4206 KRC103SRTK 4.9 1 I2C SCL 2 I2C SDA 3 I2C OFF 4 P.CON+9V 5 AUDIO OUT L 6 AUDIO OUT R 7 NC 8 VIDEO OUT 9 3 39 0 R4202 GND 0.8 1K MUTE SW 0 Q4204 KTC3875S_Y_RTK W834 38 0 SP_OUT_R2 R4201 0.8 2 2 1K 0 MUTE SW Q4203 KTC3875S_Y_RTK PCBD20 CME066 1 A G-15 NOTE:THE DC VOLTAGE EACH PART WAS MEASURED WITH THE DIGITAL TESTER DURING PLAYBACK. NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE B C PIECES REPAREES PAR UN ETANT ATTENTION:LES DANGEREUSES AN POINT DE VUE SECURITE THESE PARTS MARKED BY CAUTION:SINCE CRITICAL FOR SAFETY,USE ONES N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES D ARE CAUTION: DIGITAL TRANSISTOR CAUTION: DIGITAL TRANSISTOR 1 DESCRIBED IN PARTS LIST ONLY E F G H G-16 A B C 8 D E F G H DEFLECTION SCHEMATIC DIAGRAM V.OUTPUT IC IC401 LA78040N 8 (AV PCB) THERMAL PROTECTION AMP + PUMP UP GND 4 5 0 6 12.9 7 24.8 3.9 R407_1 680 1/4W 0 C429 10 8 1W D402 R450 NC 5 HV AFC 4 FOCUS HEA TER F GND S FROM/TO CRT SCREEN GND 0 11 ABL GND 7 2.7 E8 CP803A B2013H02-4P 180V C402 100V TP403 22 YK HEATER 39K 1/4W C439 R430 1SS133 500V 56P SL R423 0.56 2W 3 (CP803B) 3 GND 2 HEATER 1 W836 R453 2 2 120K 1/2W NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE A G-17 TO CRT 4 R445_1 W840 10K 1/4W 1 180V NC TP402 1 B+ 6.8 3W 1N4937-PAN C421 35V 470 MHE W851 9 8 D410 R410 R408 +B GND R444 D409 FROM POWER UNREG+12V MTZJ5.1B-EIC W898 47K 1/4W 1 2 2 CD801_1 SM1098-009-1A E180 E12 14.0 4 NC E27 3 R429 MTZJ6.8B-EIC 10K R428 R406 C410 100V 10 YK 5.6K +-1% SW Q402 2SC2909 0 10K 25.0 500V 0.0022 B D411 25V 10 KA C401 D413 0 HS402 763WSA0029 D416 135.0 0 5.6K 1/4W R420 0.6 1W R431 1.25KV 0.01 MPP C428_1 R460 100 1/4W C418 0 110.4 1N4937-PAN 100K 1/4W R432 3 1 1 44 5 FROM/TO CRT FB401_2 FQI14B007_T COL 6 10K 1/4W CURRENT DET. 0 Q401 135.0 2SA1624 1N4937-PAN C430 C422 C423_1 272.0 113.8 H.OUTPUT Q406 2SC5885 247.6 1.3 R G B 5 7 1 C432 6 9 10 8 6 11 100V 0.47 MKT NC 2 1 500V 0.001 B 2W V801 A36AKJ13X02 C(M) 33K 1/2W R456 133.9 R433 4 470 1/2W 0 H-DRIVE Q405 KTC3227_Y 3 50V 22 YK C417 100V 0.01 MMTS R409 22K 1/4W W841 1/2W 1/2W 0 133.8 6 2KV 0.001 R 250V 0.27 PMS 150 R447 D405 1N4002-PAN 14.3 SW Q403 2SA1371 133.2 1/2W R421 560 V.POSI VR402 2.2K METAL R467 1 1/2W C434 D403 D404 D406 T401_1 ETH09K14BZ 56K R404 56K R405 D408 MTZJ33B-EIC 4 1K 1W C431 X-RAY +30V 2 1 250V 22 YK FROM/TO MICON/TUNER POWER_ON_H NC R426 R402 1N4002-PAN E0_LEAK ELH5L4113 C450 100V 0.22 MKT R417 3 L401 5 4 L402 68 1/2W 330 2W W916 CP401 A1561WV2-A5P 5 43 250V 2.2 MHE 4.7mH 0909 R401 560 1/2W R422 R415 2.7 1/2W HS401_1 763WSA0029 S804X AFC C407 ACL 25V 2200 YK R414 C405 H_OUT R418 V_RANP_FB 27K 1/4W 2.7 1/2W 1/4W R434_2 R411 R424 V_OUT 18K 1/4W FROM/TO CHROMA 50V 1 YK 1K 1/4W 4.7K 1/4W M +-1% R416 12K 1/4W +-1% 3.3K 560 1/2W R413_3 6 7 FROM/TO DY 1/4W C406 1.3 1K R403 D401 7 3 25.5 35V 100 MHE 2 3.9 1N4002-PAN 1 MTZJ33B-EIC MTZJ33B-EIC Vcc B NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. NOTE: THE RESISTOR MARKED F IS FUSE RESISTOR. THE ALUMI ELECTROLYTIC CAPACITOR MARKED NP IS NON POLAR ONE. C D E PCBD20 CME066 PIECES REPAREES PAR UN ETANT ATTENTION:LES DANGEREUSES AN POINT DE VUE SECURITE THESE PARTS MARKED BY CAUTION:SINCE CRITICAL FOR SAFETY,USE ONES N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES F DESCRIBED IN PARTS LIST ONLY G ARE 1 H G-18 A B C D E F G H FROM CHROMA 8 8 (CP802A) CP802B B2013H02-6P 1 GND 3 G.OUT 4 R.OUT 5 B.OUT D806 D805 FROM DEFLECTION 7 1SS133 CLAMP_OFF 1SS133 6 D804 (CRT PCB) CLAMP 2 1SS133 CRT SCHEMATIC DIAGRAM 7 GND 3 R811 NC 4.7K 270 W880 R814 R816 C809 6.96 47 15K 2W 46 R804 R806 4 RED OUT Q806 2SC4217 R805 TP023 R807 R802 GREEN OUT Q805 2SC4217 45 2.7K 1/4W 15K 2W R803 6.95 2.7K 1/4W TP022 BLUE OUT Q804 2SC4217 5 127.6 125.1 6.94 56uH L801_1 7.38 7.38 122.8 470P CH C810 7.38 5 R815 4.7K 270 W872 390P CH GND 6 W873 TP024 2 W871 15K 2W GND W861 1 C811 CP805 (CD801_1) A2361WV2-2P CH FROM/TO DEFLECTION 390P 6 W878 W879 R809 180V 180V R813 4 270 HEATER 2 2.7K 1/4W 1 4.7K CP803B (CP803A) B2013H02-4P 4 FOCUS 121 8 6.4 7 117 9 CP806 SCREEN 4 5 CRT SOCKET J801_1 ISMS01S 3 C802 3 2KV 0.001 B 0 0 1 6 F 0 0 3 99.6 101.6 ACCESSORY TM101 2 2 BL001 HPN-01 PCB110 CCE062 A G-19 NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE 1 B C D PIECES REPAREES PAR UN ETANT ATTENTION:LES DANGEREUSES AN POINT DE VUE SECURITE THESE PARTS MARKED BY CAUTION:SINCE CRITICAL FOR SAFETY,USE ONES N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES E F ARE 1 DESCRIBED IN PARTS LIST ONLY G H G-20 A B C D E F G H POWER SCHEMATIC DIAGRAM 8 8 (AV PCB) R3819 D3823 25V 2200 MHE 30PRA60-FC 3W C3827 1 2 2 1 1 TO DEFLECTION D3821 W807 RU2AM-EIC C3824 C3826 CP3800 A1561WV2-2P 7 2KV470P R GND R3828 W833 680 1/4W C3818 C3815 S 0 P2 168 135V 1W 16.0 0.33 UNREG+12V P1 5 LG 3 P4 0 21DQ09N 135 0 15 UNREG+5V UNREG+8V GND 4 GND 0 16 14.2 12V P3 1 14 FROM/TO IN/OUT 17 8.2 8V GND 18 S801Y 1N4937 S801X 0.01 B S802X 3 D3828 MTZJ2.2B-EIC 1SS133 1/2W R3813 1K 1/4W 1/2W MTZJ3.9B-EIC D3803 2 1SS133 D3802 D3827 C3816 IS THE LIVE CONNECTION 1SS133 D3822 1SS133 1SS133 10 1K R3822 D3811 R3825 1N4937-PAN 250V 0.0047 KX CAUTION: TO REGULATOR D3820 13 1SS133 0 0 GND 0.022 C3805 C3806 W802 SG 6 C3802 B MTZJ5.6B-EIC D3801 4.8 STAND-BY SW Q3804 DTC144EKA C3808 0.4 0 UNREG+12V W874 D3831 0.01 B BUFFER Q3802 KTC3203_Y W813 D3806 D3807 1/4W 50V 10 MHE D3804 R3809 6.3 330 12 49 TO CHROMA 0 168 HS3800 763WAAA117 D3829 1/4W R3818 MTZJ18B-EIC 1/4W R3804 330 1/4W R3805 MTZJ3.6B-EIC 1K 6.8K 1/4W 56K 1/2W R3801 R3802 3.3K 1/4W +-1% R3821 C3814 330 D3814 100 1/4W +B ADJ VR3800 470 METAL R3800_1 2 500V 0.0039 B 1/2W 1/4W 11 NC 8.7 SB 7 168 16.0 6.0 FEED BACK SWITCHING 5.4 Q3800 KTC3198 5V 8 330 R3812 4 330 C3820 4.1 168 HG R3833 4.0 10 16V 1000 MHE 1.2M 1/2W W4BRH3.5X6X1.0X2 D 240 6.3 0.012 B 3 13.6 0.4 5 C3822 1/2W 4.5V B3800 W895 100V 0.047 MMTS 50V 4.7 YK 200V 470 UP R3827 2 R3815 25V 2200 MHE D3815 R3826 C3807 3 6.3 2 7.3 C3809 1 FEED BACK IC3800 PS2561AL1-1-V(W) ST_BY_HI 21DQ09N T3800 81300054 1SS133 4 POWER_FAIL D3826 D3812 SOUND_GND SOUND+B GND FROM/TO MICON/TUNER 1SS133 R3816 MTZJ12B-EIC 25V 1000 MHE 48 1/4W GND C3811 6.3A 125V 21DQ09N 1K D3819 1.2M POWER Q3803 2SK3563(ORION_Q) G 6.3 21DQ09N D3817 C3823 FH3801 EYF-52BCY B D3816 1 500V 0.001 6 D3825 R3830 1N4937-PAN 100 1/4W RM11C-EIC 2 COIL,LINE FILTER L3801 SS26V-R150162 D3809 3 W808 FH3800 EYF-52BCY R3829 TO SOUND AMP C3812 500V 0.001 B RM11C-EIC 4 C3810 5W D3810 1/2W F3800 6.3A125V 5 R3803 S3801 BLACK R3817_1 1.5M BLACK D3818 D3824 1 C3801 S3802 WHITE 275V 0.33 ECQUL WHITE RM11C-EIC D3808 TH3800_2 PTDCA1BF3R0Q100 09414909 WIDE MLADE 3 RM11C-EIC P 2KV 0.0015 R 2 1 AC120V_60Hz CD3800 UNREG+12V 0.22 1W MTZJ18B-EIC H 6 +B 200V 220 YXF R3806 DEGAUSS COIL L3800 8R140023 2.7M 1/2W +-10% 7 R3831 100 1/4W PCBD20 CME066 6.3A 125V 1 UNE PROTECTION CONTINUE LES RISQUES D’INCEIE ATTENTION :POUR N’UTILISER QUE DES FUSIBLE DE MEME TYPE 6.3A 125V(F3800). CONTINUED PROTECTION AGAINST FIRE HAZARD, CAUTION :FOR REPLACE ONLY WITH THE SAME TYPE FUSE 6.3A 125V(F3800). A G-21 B PIECES REPAREES PAR UN ETANT ATTENTION:LES DANGEREUSES AN POINT DE VUE SECURITE NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE D E ARE CAUTION: DIGITAL TRANSISTOR DESCRIBED IN PARTS LIST ONLY N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. C THESE PARTS MARKED BY CAUTION:SINCE CRITICAL FOR SAFETY,USE ONES F G 1 H G-22 A B C D E F G H CHROMA SCHEMATIC DIAGRAM 8 8 (AV PCB) FROM/TO REGULATOR DVD_Y DVD_C P.CON+5V 7 7 C610 3.5 1.8 ACL MONITOR OUT HVCO F/B AUX2(R) IN VRAMP CAP AFC FILTER 5.6K 1N4005-EIC FROM/TO MICON/TUNER R607 C613_1 5 C629 C639 16V 100 KA C644_1 1 B 3.5 3.3 6.8K 5.0 3.9 HD OUT VRAMP OUT VD OUT VRANP F/B V_RANP_FB OSD G IN AUDIO ATT OUT(L) 33 AUDIO ATT FILTER 2.9 32 10 OSD B IN 3.2 C615 50V 1 KA C626 SW_A_OUT_L 50V 2.2 KA 4.8 SDA Y(Y/C) IN SDL C(Y/C) IN 31 30 2.2 2.3 R625 100CT3R505 18P CH 3.2 V/C GND XTAL 358 SPINAU MONO IN CVBS1 IN 27 C627 3.5 3.1 NC 2.4 8.2K AFC 50V 0.47 KA C618 1 FROM/TO IN/OUT 24 19 AUX1(L) IN 2.1 CVBS3 IN CVBS2 IN AUX2(l) IN V/C VCC 2.0 5.0 DVD_A_OUT_L2 50V 1 KA 3 50V 1 KA NC L604 P.CON+5V 10uHTSL0808 R647 16V 100 KA C638 R603 1/4W 16V 100 KA DVD_A_OUT_R2 R616 47K C633 W843 VIDEO_OUT W853 B DVD_A_OUT_L2 2.7K TUNER_VIDEO C625 FRONT_VIDEO C604 FRONT_VIDEO 27 3.1 C621 3.1 C601_1 H_OUT C APC 23 R618 2.9 C630 SW_A_OUT_R 50V 2.2 KA 22 ACL 0.015 B 20 V_OUT DVD_C B 50V 1 KA 21 R617 2.7K 1/4W V_RANP_FB 4 DVD_Y 50V 1 KA C641 47K 2.2M C631 DVD_A_OUT_R2 75 FROM/TO DEFLECTION AUDIO ATT OUT(R) 26 3.579545MHz C632 R619 VIDEO LINE OUT 0 X602 FSC_OUT 16 2.4 28 B 25 1 H_CONTROL 17 SYNC_VIDEO 18 C605_1 W850 50V 1 KA C642 0.1 CPU_RESET FSC_OUT C645 3.1 29 W832 PROTECT 4.6 AUX1(R) IN FASTBLK W867 2.9 28 W827 TUNER_VIDEO 13 0 FSC OUT 14 W822 VIDEO_OUT OSD R IN 15 SCL 12 0 SDA 2 V_OUT R644 OSD_Y 3 1K 1/4W 5 32 R614 OSD_G 4 P.CON+8V 100 1/4W 11 0 B C607 27K OSD_R 4.3 SW Q605 KRA102SRTK 9.0 C612 VD 0 4.4 63V 1 MKT 3.9 HD R651 R611 0.01 3.1 4.8 OSD_B R627 H_CONTROL 5.0 5.0 0.01 B 50V 1 KA 0.8 25V 10 KANP SYNC_VIDEO 680 1/4W 1 42 41 40 C616 39 DEF GND SW Q601 KTC3875S_Y_RTK 10K R605 B OUT 6 AFC 1/4W R628 D601 1.8K 0 0 2.1 37 27K 1/4W 2 1SS133 1SS133 D605 330 FBP IN 36 ACL R643 G OUT H OUT H_OUT 34 R612 8.2K 0.9 2.1 R602 R OUT 35 P.CON+5V R641 34 820 1/4W DEF VCC 38 31 1SS133 D603 D602 R638 2.2 3 CLAMP 330 HI VCC R650 1K 1/4W 2.1 4 GND 1 R610 8.0 5 2 30 330 33 8.0 6 G.OUT R609 M61277FP-DF0H 7 R.OUT 3 29 IC601 8 4 B B 9 B.OUT C628 0.01 R646 33K 1/4W SW 0 Q602 KTC3875S_Y_RTK CLAMP OFF 5 0.1 15K 6 0305 50V 1 KA CP802A (CP802B) B2013H02-6P 100uH 0 6.0 P.CON+8V 100uH 0305 16V 100 KA C608 C606 P.CON+8V PROTECT TO CRT L601 S804Y 16V 100 KA C609 GND 6 L603 C643 16V 100 KA 16V 100 KA C648 FROM/TO POWER 16V 100 KA C649 P.CON+8V 0.01 2 B FROM STEREO JACK_AUDIO_L JACK_AUDIO_R FROM/TO SOUND AMP PCBD20 CME066 SW_A_OUT_L SW_A_OUT_R A G-23 B C CAUTION: DIGITAL TRANSISTOR NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE 1 D E 1 F G H G-24 A B C D E F G H STEREO SCHEMATIC DIAGRAM 8 8 (AV PCB) 7 7 FROM/TO MICON/TUNER SCL 40 TUNER_AUDIO R909 R911 100 1/4W SDA 100 1/4W 6 6 TO CHROMA 41 C924_1 JACK_AUDIO_L 42 JACK_AUDIO_R 100 1/4W R912 25V 10 KA C923_1 25V 10 KA R908 0.1 C950 B 270 21 OUT SW AGC 2.2 NC 0 20 DAC Switch De-Emph (L-R)/SAP 75us Filter Cancel SAPout Offset Expand Cancel Wide Band Offset 3 2 2.2 3.7 Cancel Pilot L-R Demod L+R Filter L+R Demod fH.2fH Trap Filter 5 2.3 dbx De-Emph 6 2.4 7 0.7 3.4 16 15 Vcc 5.1 Filter Stereo 3.4 13 VCA Input Det SAP Filter Noise FROM/TO IN/OUT Filter SAP Filter Wide Band Filter Spectral Demod SAP Expand Spectral RMS Det Spectral Det Noise 8 9 2.6 10 0.6 2.6 2.7M B 2.2 14 Det Pilot St.PLL L-R Filter RMS Det Wide Band 4 2.2 0 17 GND 11 2.2 AUDIO_OUT_L 4 AUDIO_OUT_R 12 3.6 C939 1.0 4.4 18 ZAP IIC Decoder Matrix 1 4.2 19 0.1 B 2.2 22 0.1 0.1 B C935 SOUND DECORDER IC IC902 AN5829S-E1V 4 2.2 23 50V 10 KA C938 C907 C933 0.047 B 0.1 C951 2.2 24 R913 5 B 5 R914 FRONT_A_IN_L 100 1/4W L902 100 1/4W 100uH 0305 C931 6.3V 330 KA 0.1 B C937 50V 3.3 KA C936 C934 FRONT_A_IN_R 0.022 B C929 0.1 B C932 50V 0.33 KA C928 16V 10 KA 50V 4.7 KA C926 C925 C921 50V 4.7 KA 50V 4.7 KA 3 220K R910 C941 50V 2.2 KA C943 50V 2.2 KA R916 P.CON+5V 3 GND 2 2 PCBD20 CME066 1 NOTE: THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE A G-25 B NOTE:THE DC VOLTAGE AT EACH PART WAS MEASURED WITH THE DIGITAL TESTER WHEN THE COLOR BROADCAST WAS RECEIVED IN GOOD CONDITION AND PICTURE IS NORMAL. C D PIECES REPAREES PAR UN ETANT ATTENTION:LES DANGEREUSES AN POINT DE VUE SECURITE THESE PARTS MARKED BY CAUTION:SINCE CRITICAL FOR SAFETY,USE ONES F 1 DESCRIBED IN PARTS LIST ONLY N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES E ARE G H G-26 A B C D 8 E F G H 8 LOADING MOTOR/SW SCHEMATIC DIAGRAM 7 7 6 6 (LOADING MOTOR PCB) (SW PCB) 5 CD2301 2H062102 1 4 CD2302 2H052601 5 SW2 ESE22MH24 4 3 GND(SW) 2 PICK UP INNER LIMIT SWITCH 3 4 FEED MOTOR (-) 5 SPINDLE MOTOR (-) 6 SPINDLE MOTOR (+) M FEED MOTOR (+) M2602 BCZ3B03 5 SW1 SSS-13-2 SW-2(CLOSE) GND(SW) SW-1(OPEN) 2 LOADING MOTOR(+) 1 LOADING MOTOR(-) M2603 M BCZ3B52 M PCB640 DED002 M2601 JCV9B06 4 PCB610 DED003 3 3 2 2 THESE PARTS MARKED BY CAUTION:SINCE CRITICAL FOR SAFETY,USE ONES 1 G-27 ARE PIECES REPAREES PAR UN ETANT ATTENTION:LES DANGEREUSES AN POINT DE VUE SECURITE N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES DESCRIBED IN PARTS LIST ONLY A B C D NOTE:THIS SCHEMATIC DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE 1 E F G H G-28 A B C D E F G H INTERCONNECTION DIAGRAM 8 8 SP352 8 OHM 1 2 R CH SPEAKER CD302 7 2 SP OUT R+ 2 2 3 2 1 NC 5 H 4 NC 3 H 3 2 NC 6 H 2 3 Vout 1 DVD PCB PCB130 DME060 GND 2 SOUND GND 1 H 7 OS2202 CP302 SP351 8 OHM 2 2 1 SP OUT L+ CP301 CD301 7 SOUND GND L CH SPEAKER 1 COMMAND TRANSMITTER TM101 E 1 1 COAXIAL J4201 1 E 1 E RED WHITE YELLOW FRONT VIDEO JACK J2202 FRONT AUDIO JACK J2203 B+ 3 E FRONT AUDIO JACK J2204 HEADPHONE_JACK J2201 6 L4002 CP8001 5 +B 1 2 3 4 CP401 5 180V VREF VCC 22 22 22 VCC E 21 21 21 E F 20 20 20 F D 19 19 19 D A 18 18 18 A B 17 17 17 B C 16 16 16 C RF 15 15 15 RF DVD/CD 14 14 14 DVD/CD MON(COM) 13 13 13 MON(COM) GND(CD) 12 12 12 GND(CD) VOL(CD) 11 11 11 VOL(CD) LD(CD) 10 10 10 LD(CD) LD(DVD) 9 9 9 LD(DVD) 1 GND(D) GND(DVD) 8 8 8 GND(DVD) 2 GND(D) VOL(DVD) 7 7 7 VOL(DVD) SSCCLK 3 3 SSCCLK/TX NC(SW) 6 6 6 NC(SW) RDY(I/O(0)) 4 4 RDY(I/O(0))/RX MON(DVD) 5 5 5 MON(DVD) GND(M) 5 5 GND(M) F+ 4 4 4 F+ 6 6 P.CON+6V F- 3 3 3 F- P.CON+5V 7 7 P.CON+A5V T+ 2 2 2 T+ P.CON+3.8V 8 8 P.CON+3.8V T- 1 1 1 T- P.CON+3.8V 9 9 P.CON+3.8V GND 10 10 GND(A) SPDIF 11 11 SPDIF SSCRXD 12 12 SSCRXD SSCTXD 13 13 SSCTXD CD8101 FFC 4 NC NC 5 NC 1 GND 2 G.OUT 3 R.OUT 4 B.OUT 5 6 12 12 1 1 CVBS GND 11 11 2 2 GND C(CVBS) 10 10 3 3 C(CVBS) GND 9 9 4 4 Y(G) 8 8 5 5 GND Y(G) GND 7 7 6 6 GND AUDIO-L 6 6 7 7 AUDIO-L GND 5 5 8 8 GND AUDIO-R 4 4 9 9 AUDIO-R ZERO 3 3 10 10 2 2 11 11 1 1 12 12 7 NC 8 NC 9 NC 10 CLOCK 11 DATA 12 AFT OUT CP3800 13 AUDIO OUT 1 1 ANODE CLAMP CP2302 FFC CLOSE 1 1 1 CLOSE GND(D) 2 2 2 GND(D) OPEN 3 3 3 OPEN LD+ 4 4 4 LD+ LD- 5 5 5 LD- 6 DVD DRIVE DK4001 CV_VLM102 OPTICAL PICK-UP 5 SPINDLE MOTOR 4 2 14 SIF OUT 15 BT DVD RESET GND 9 NC S3802 16 IF OUT 17 VIDEO OUT S3801 21 SWD_VIDEO 8 DVD_VIDEO 7 AUDIO OUT R 5 4 3 2 1 6 AUDIO OUT L P.CON+9V I2C OFF I2C SDA I2C SCL CP101 AV PCB PCBD20 CME066 CD801 GND CRT PCB PCB110 CCE062 SP1+ 1 SP1+ SP1- 2 SP1- SLD+ 3 SLD+ SLD- 4 SLD- LIMIT SW 5 LIMIT SW SW(GND) 6 SW(GND) LOADING MOTOR SLED MOTOR 3 ZERO DVD RESET GND DEGAUSS COIL L3800 WHITE BLACK 2 AC120V_60Hz CD3800 20 6 5 B.OUT CLAMP_OFF 3 4 R.OUT G.OUT NC CP8101_3 CVBS 1 2 1 CLAMP CP802B GND 3 2 23 2 2 2 4 3 F 1 CRT V801 H.V 180V GND HEATER CP803B 9 NC NC CP802A CLAMP_OFF GND 3 23 WIDE BLADE 4 3 2 1 CP803A HEATER GND NC 4 5 6 CRT SOCKET J801_1 7 8 FOCUS CP806 SCREEN 1 GND NC NC CD803 CP805 NC 2 GND(PDIC) 23 1 CP8002 NC 2 1 NC 24 VREF CP2303 SCREEN FOCUS 3 NC 24 GND 19 18 FBT FB401_1 4 24 GND MOTOR+B(+6V) TU001 CD4002 FFC CP2301 GND(PDIC) 1 1 PIECES REPAREES PAR UN ETANT ATTENTION:LES DANGEREUSES AN POINT DE VUE SECURITE NOTE: THIS INTERCONNECTION DIAGRAM IS THE LATEST AT THE TIME OF PRINTING AND SUBJECT TO CHANGE WITHOUT NOTICE N’UTILISER QUE CELLS DECRITES DANS LA NOMENCLATURE DES PIECES A G-29 B C D E THESE PARTS MARKED BY CAUTION:SINCE CRITICAL FOR SAFETY,USE ONES ARE DESCRIBED IN PARTS LIST ONLY F G H G-30 WAVEFORMS MPEG/MICON/DSP AUDIO/VIDEO 10ns 500µs 100mV 500mV 1 6 5ns 500µs 20mV 500mV 2 20ns 1.0V 3 200ns 1.0V 4 MEMORY 5ns 500mV 5 POWER ON 0.2ms 1.0V 23 POWER ON 0.2ms 1.0V 24 7 POWER ON 10µs 200mV 5ms 1.0V 25 9 POWER ON 50µs 10µs 200mV 1.0V 26 10 MICON/TUNER POWER ON CHROMA POWER ON 20µs 0.2ms 1.0V 0.5V 22 27 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram. H-1 WAVEFORMS STANDBY POWER ON DVD PLAY 0.5µs 100mV 20µs 0.5V 0.5ms 200mV 28 POWER ON 10µs 2.0V 29 33 38 POWER ON DVD PLAY 20µs 2.0V 10µs 0.5V 39 34 SOUND AMP POWER ON 10µs 2.0V STEREO POWER ON 1ms POWER ON 1ms 100mV 50mV 30 35 40 POWER ON POWER ON 1ms POWER ON 10µs 2.0V 31 1ms 200mV 100mV 36 41 IN/OUT POWER ON DVD PLAY 10ms 0.5V 0.5ms 200mV 32 POWER ON 1ms 200mV 37 42 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram. H-2 WAVEFORMS DEFLECTION POWER ON 5ms 10.0V POWER STANDBY 5µs 5.0V 43 48 POWER ON STANDBY 5µs 20µs 5.0V 44 CRT 5.0V 49 SOUND AMP POWER ON 20µs 5.0V 45 1ms 50mV 50 POWER ON 20µs 50V 46 1ms 50mV 51 POWER ON 20µs 50V 47 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram. H-3 MECHANICAL EXPLODED VIEW 202 114 102B 202 202 206 202 102C 117 201 202 102A 102 102C 201 201 PCB110 (CRT PCB ASS'Y) 112 116 201 210 101I 210 204 101B 213 204 101H 101J 101I 101G 101F 204 204 101J 210 101C 101D 101E 101J 101J A 101K 101 101A I1-1 210 MECHANICAL EXPLODED VIEW 212 106 212 106 118 208 208 208 209 PCB130 (DVD PCB ASS'Y) 209 209 208 208 208 208 208 208 209 108 208 208 208 115 208 208 208 208 110 208 119 208 113 104 208 109 208 113 208 206 203 208 120 203 A 205 107 PCBD20 (AV PCB ASS'Y) 205 206 206 205 211 103 105 111 207 I1-2 MECHANICAL EXPLODED VIEW (PACKING DIAGRAM) 127, 128, 129, 130, BL001, TM101 124 126 124 121 122 125 123 123 I1-3 DVD DECK EXPLODED VIEW 611 600 608 612 AA Cannot supply by a unit. 704 610 614 AA AA AA AA AA 613 AA 602 AA AA 609 AA 615 M2603 607 SW1 AA PCB610 (LOADING MOTOR PCB ASS'Y) 705 617 616 CD2301 701 CD2302 604 705 SW2 618 702 PCB640 (SW PCB ASS'Y) CD2001 703 606 605 Do not replace the parts. Because, minute adjustments are needed if this condition is disassembled further more. If the repair is needed, replace the DVD MECHA ASS'Y. 603 M2602 605 601 CLASS MARK GREASE AA NOTE: Applying positions AA for the grease are displayed for this section. Check if the correct grease is applied for each position. I2-1 619 MECHANICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description 101 101A 101B 101C 101D 101E 101F 101G 101H 101I 101J 101K 72783644 72783645 72783646 72783647 72783648 72783649 72783650 72783651 72798625 72783652 72796103 72796292 7A701A341A 701WPJC951 712WPJC245 713WPAA205 713WPAA204 735WPAA894 735WPAA895 735WPBB344 742WKA0001 761WPAA123 800WQ0A052 723549A039 FRONT CABI ASS'Y CABINET FRONT FLAP DVD GLASS LED GUIDE REMOCON BUTTON FRAME 2 STOPPER BUTTON BUTTON FRAME 1 SPRING DVD-FLAP HOLDER BOSS FELT SHEET BADGE BRAND 102 102A 102B 102C 72783653 72783654 72796299 72798774 7A702A200A 702WPAA954 800WQ0A040 800WQ0A045 BACK CABI ASS'Y CABINET BACK FELT SHEET FELT SHEET 103 104 105 106 107 108 109 72799697 72799936 72798668 72798655 72799384 72799373 72783655 724WNAA005 761WSA0155 761WPA0249 753WUA0069 702WSAA128 702WSA0213 7230007676 SHEET PC ANGLE DECK HOLDER FBT SPRING EARTH PLATE BOTTOM SHIELD TOP SHEET JACK 110 111 112 113 114 115 116 117 118 119 72798688 72798640 72784113 72795699 72784114 72799853 72795687 72783657 72795680 72783197 774WPA0006 752WSA0333 723000D317 899EFBA002 722549A599 752WSA0488 741WUA0021 726000A136 8995034000 753WEA0033 HOLDER WIRE SHIELD JACK POP LABEL WIRING-CLIP SHEET RATING SHIELD DECK SPRING EARTH SHEET CRT SERVICEMAN CORD CLIP UL CO. SHEET CU 120 121 122 123 124 125 126 127 128 129 72781978 72782852 72795621 72781016 72781017 72784115 72783493 72781635 72781569 72781605 8965TS1017 791WHAA137 791WHAA126 792WHAA148 792WHAA149 793WCDD139 A5W302S975 JB5ND300 J3N51617A J5S10229A CUSHION 65TS10-10(17.5*20*14) LIGHTRON SHEET FILM BAG PACKAGE BOTTOM PACKAGE T0P GIFT BOX INSTRUCTION BOOK KIT POLYBAG INSTRUCTION(RED CAUTION) REGISTRATION CARD INFORMATION SHEET(USA) 130 72784116 J5W30201B INSTRUCTION BOOK 201 202 203 204 205 206 207 208 209 72781284 72781279 72798794 72798791 72781255 72798787 72781251 72781247 72781263 8121L50B8U 8117540A6U 811754080U 8110630A0U 8109I3080U 810923080U 810963080Q 810923060U 810F13080U SCREW,TAPPING(BO) GW15 5*28 CH HEXAGON SCREW TAP TITE(B0) TRUSS 4*16 CH SCREW TAP TITE(B0) TRUSS 4*8 CH SCREW TAP TITE(P) BRAZIER 3*10 CH SCREW TAP TITE(B) WH7 3*8 CH SCREW TAP TITE(B) BIND 3*8 CH SCREW TAP TITE(B) BRAZIER 3*8 STAINLESS SCREW TAP TITE(B) BIND 3*6 CH SEMS(F) 3*8 CH 210 211 212 213 72798790 72798786 72795782 72798793 811063080U 810763080U 811022680U 8110E3080U SCREW TAP TITE(P) BRAZIER 3*8 CH SCREW TAP TITE(S) BRAZIER 3*8 CH SCREW TAP TITE(P) BIND 2.6*8 CH SCREW TAP TITE(P) WH10 3*8 CH J1-1 DVD DECK REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description ! 600 601 602 603 604 605 606 607 608 609 72783201 72795767 72795768 72795769 72798813 72795771 72795772 72781331 72795774 72795775 A2I301H650 92P100109A 92P100094A 92P100088A 92AAA0013A 92P200013A 92P200014A 92SBB0029A 92P100095A 92P100097A DVD MECHA ASS'Y A2I301H650 HOLDER,TRAVERSE CLAMPER GEAR,MOTOR FEED RACK ASS'Y INSULATOR(F) INSULATOR(R) LOADER SUB ASS'Y GEAR,PULLEY PULLEY,MOTOR 610 611 612 613 614 615 616 617 618 619 72795776 72795777 72795778 72795779 72795780 72798838 72798836 72798837 72798849 72795888 92P100096A 92P200012A 92P000014A 92P100093A 92P100091A 92P100092A 92P100089A 92P100090A 92P300020A 800WFAA008 GEAR,MAIN BELT,LOADING PLATE,CLAMPER RACK,LOADING FRAME,MAIN TRAY RACK,FEED 1 RACK,FEED 2 SPRING,RACK FEED CUSHION C 701 702 703 704 705 72795782 72795783 72795784 72795785 72796070 811022680U 814011723U 816112080U 814011730U 811022080U SCREW TAP TITE(P) BIND 2.6*8 CH SCREW,PAN M1.7*2.3 P3 CH SEMS.TAP TITE(P) PAN W10 2*8 CH SCREW,PAN M1.7*3 P3 CH SCREW,TAP TITE(P) BIND 2*8 CH 72783183 72795869 72795870 72796050 72795947 72795948 72783202 72783203 72796052 122J4O1903 122H062102 122H052601 0515S32002 1515S98003 1596S18003 A5M4016610 A5N813W640 0500101037 CORD JUMPER 127000-2928 CORD JUMPER 2H062102 CORD JUMPER 2H052601 SWITCH SSS-13-2 FEED MOTOR BCZ3B03B MOTOR,LOADING BCZ3B52B PCB ASS'Y DED003A PCB ASS'Y DED002B PUSH SWITCH ESE22MH24 CD2001 CD2301 CD2302 SW1 ! M2602 ! M2603 PCB610 PCB640 SW2 J2-1 ELECTRICAL REPLACEMENT PARTS LIST Location No. ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! TSB P/N Reference No. Description RESISTORS R139 R310 R401 R402 R408 R415 R418 R426 R429 R431 R444 R445 R447 R450 R803 R805 R807 R3005 R3800 R3803 R3806 R3812 R3817 R3819 R3821 R3828 72797809 72797922 72781694 72781689 72783635 72794682 72794682 72794608 72795519 72795519 72795514 72796042 72798047 72781704 72781690 72781690 72781690 72797918 72781721 72795500 72794631 72795109 72797971 72794621 72781683 72794633 R002T4155J R3X28B2R2J R3K58A331J R3K58A151J R3K28AR56J R002T22R7J R002T22R7J R3K581102J R65581010J R65581010J R4X5T6562F R002T4393J R655U2680J R3K58B6R8J R3K58A153J R3K58A153J R3K58A153J R3X28B1R8J R4K1T4332F R002T2155J R0G3K2275K R002T2331J R5X2CD010J R3X28B010J R3K581R33J R63881R22J RC R,METAL OXIDE R,METAL OXIDE R,METAL OXIDE R,METAL RC RC R,METAL OXIDE R,FUSE R,FUSE R,METAL RC R,FUSE R,METAL OXIDE R,METAL OXIDE R,METAL OXIDE R,METAL OXIDE R,METAL OXIDE R,METAL RC RC RC R,CEMENT R,METAL OXIDE R,METAL OXIDE R,FUSE C357 C407 C421 C423 C428 C431 C450 C802 C3002 C3010 C3011 C3801 C3810 C3811 C3812 C3815 C3816 C3818 C3822 C3823 C3824 C3826 C3827 72795574 72795574 72797489 72796346 72795825 72795570 72794393 72795578 72797374 72797374 72797374 72794401 72795629 72795581 72795629 72795573 72795579 72794381 72797483 72794410 72794408 72794411 72794381 E02LF3222M E02LF3222M E5EZT4471M P4J7F3274J P4N8FJ103H E0ELFD220M C03L0R713K C0JBB0713K E02LF1222M E02LF1222M E02LF1222M P2122B334M C0JTB0513K C0PLRR7E3K C0JTB0513K E51CGC471M CD39E0MQ3M E5EZF3222M E5EZT2102M E5EZF3102M C0PLRR7Q2K E62NFC221M E5EZF3222M CE CE CE CMPP CMPP CE CC CC CE CE CE CMP CC CC CC CE CC CE CE CE CC CE CE D101 D102 D105 D106 D109 D110 D111 D401 D402 D403 D404 D405 D406 D408 D409 D410 D411 D413 D416 D601 D602 D603 D605 D804 72794491 72783214 72794491 72794491 72794491 72794491 72794491 72783209 72795543 72781366 72781366 72783209 72783209 72781366 72794491 72781369 72795543 72795543 72781368 72795626 72794491 72794491 72794491 72794491 D1VT001330 D9WU05R62B D1VT001330 D1VT001330 D1VT001330 D1VT001330 D1VT001330 D2MXN40020 D2MXN49370 D9WU03302B D9WU03302B D2MXN40020 D2MXN40020 D9WU03302B D1VT001330 D9WU06R82B D2MXN49370 D2MXN49370 D9WU05R12B D2WXN40050 D1VT001330 D1VT001330 D1VT001330 D1VT001330 DIODE,SILICON DIODE,ZENER DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE,FAST RECOVERY DIODE,FAST RECOVERY DIODE,ZENER DIODE,ZENER DIODE,FAST RECOVERY DIODE,FAST RECOVERY DIODE,ZENER DIODE,SILICON DIODE,ZENER DIODE,FAST RECOVERY DIODE,FAST RECOVERY DIODE,ZENER DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON 1.5M OHM 1/4W 2.2 OHM 3W 330 OHM 2W 150 OHM 2W 0.56 OHM 2W 2.7 OHM 1/2W 2.7 OHM 1/2W 1K OHM 1W 1 OHM 1W 1 OHM 1W 5.6K OHM 1/6W 39K OHM 1/4W 68 OHM 1/2W 6.8 OHM 3W 15K OHM 2W 15K OHM 2W 15K OHM 2W 1.8 OHM 3W 1 3.3K OHM 1/4W 1.5M OHM 1/2W 2.7M OHM 1/2W 330 OHM 1/2W 1 OHM 5W 1 OHM 3W 0.33 OHM 1W 0.22 OHM 1W CAPACITORS ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! 2200 UF 25V 2200 UF 25V 470 UF 35V 0.27 UF 250V PMS 0.01 UF 1.25KV 22 UF 250V 0.001 UF 2KV R 0.001 UF 2KV B 2200 UF 10V 2200 UF 10V 2200 UF 10V 0.33 UF 275V ECQUL 0.001 UF 500V B 0.0015 UF 2KV R 0.001 UF 500V B 470 UF 200V 0.0047UF 250V 2200 UF 25V 1000 UF 16V 1000 UF 25V 470 PF 2KV R 220 UF 200V 2200 UF 25V DIODES ! ! ! ! J3-1 1SS133T-77 MTZJ5.6B-EIC 1SS133T-77 1SS133T-77 1SS133T-77 1SS133T-77 1SS133T-77 1N4002-PAN 1N4937-PAN MTZJ33B-EIC MTZJ33B-EIC 1N4002-PAN 1N4002-PAN MTZJ33B-EIC 1SS133T-77 MTZJ6.8B-EIC 1N4937-PAN 1N4937-PAN MTZJ5.1B-EIC 1N4005-EIC 1SS133T-77 1SS133T-77 1SS133T-77 1SS133T-77 ELECTRICAL REPLACEMENT PARTS LIST Location No. ! ! ! ! ! ! ! ! ! ! ! ! TSB P/N Reference No. Description DIODES D805 D806 D2201 D2303 D2304 D3001 D3002 D3003 D3004 D3006 D3801 D3802 D3803 D3804 D3806 D3807 D3808 D3809 D3810 D3811 D3812 D3814 D3815 D3816 D3817 D3818 D3819 D3820 D3821 D3822 D3823 D3824 D3825 D3826 D3827 D3828 D3829 D3831 D4002 D4003 D4004 D4005 D4006 D4007 D8111 D8112 72794491 72794491 72796482 72795897 72795897 72783209 72783210 72783214 72783209 72794488 72783214 72794491 72794491 72783211 72794491 72795543 72794473 72794473 72783211 72794491 72794491 72783636 72794473 72794473 72794480 72795543 72794480 72794480 72795545 72794491 72794474 72794480 72781364 72794491 72794491 72783212 72794483 72783213 72795897 72795897 72795897 72795897 72795897 72795897 72795897 72795897 D1VT001330 D1VT001330 0021E2Q140 DD7R0S3550 DD7R0S3550 D2MXN40020 D9WU01002B D9WU05R62B D2MXN40020 D2WT011E10 D9WU05R62B D1VT001330 D1VT001330 D9WU01802B D1VT001330 D2MXN49370 D2WTRM11C0 D2WTRM11C0 D9WU01802B D1VT001330 D1VT001330 D9WU03R62B D2WTRM11C0 D2WTRM11C0 D28T21DQN9 D2MXN49370 D28T21DQN9 D28T21DQN9 D2WXRU2AM0 D1VT001330 D28F0PRA60 D28T21DQN9 D9WU01202B D1VT001330 D1VT001330 D9WU02R22B D2WXN49370 D9WU03R92B DD7R0S3550 DD7R0S3550 DD7R0S3550 DD7R0S3550 DD7R0S3550 DD7R0S3550 DD7R0S3550 DD7R0S3550 DIODE,SILICON DIODE,SILICON LED DIODE,SILICON DIODE,SILICON DIODE,FAST RECOVERY DIODE,ZENER DIODE,ZENER DIODE,FAST RECOVERY DIODE,SILICON DIODE,ZENER DIODE,SILICON DIODE,SILICON DIODE,ZENER DIODE,SILICON DIODE,FAST RECOVERY DIODE,SILICON DIODE,SILICON DIODE,ZENER DIODE,SILICON DIODE,SILICON DIODE,ZENER DIODE,SILICON DIODE,SILICON DIODE,SCHOTTKY DIODE,FAST RECOVERY DIODE,SCHOTTKY DIODE,SCHOTTKY DIODE,SILICON DIODE,SILICON DIODE,RECTIFIER DIODE,SCHOTTKY DIODE,ZENER DIODE,SILICON DIODE,SILICON DIODE,ZENER DIODE,SILICON DIODE,ZENER DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON DIODE,SILICON IC101 IC103 IC199 IC352 IC353 IC401 IC601 IC902 IC2301 IC3001 IC3002 IC3800 IC4001 IC4003 IC4007 IC4009 IC8102 72783219 72796084 72784117 72783215 72783215 72795534 72783217 72795535 72783216 72783218 72795906 72794512 72783220 72795912 72784118 72783221 72795922 I55F06087A I9UF032310 A5W201YD25 I01DP75130 I01DP75130 I03TD804N0 I06FC12770 I01FF58290 I03FV65650 I07F90WTP0 I1KA78R050 000220002W ICQK068621 I07F9E00W0 S5W201YF02 IF9J0161A7 I17F017530 IC IC INIT DATA IC IC IC IC IC IC IC IC PHOTO COUPLER IC IC MEMORY DATA IC IC Q101 Q104 Q401 Q402 Q403 Q405 Q406 Q601 Q602 Q605 72794571 72794566 72794569 72795474 72795475 72794561 72795478 72794571 72794571 72795963 TCAA3875SY TAAA1504SY TA3T016240 TC3T029090 TA3T1371A0 TCAT03227Y TC1G058850 TCAA3875SY TCAA3875SY TPAAB05001 TRANSISTOR,SILICON TRANSISTOR,SILICON TRANSISTOR,SILICON TRANSISTOR,SILICON TRANSISTOR,SILICON TRANSISTOR,SILICON TRANSISTOR,SILICON TRANSISTOR,SILICON TRANSISTOR,SILICON COMPOUND TRANSISTOR 1SS133T-77 1SS133T-77 LTL-1CHEE-002A 1SS355 TE-17 1SS355 TE-17 1N4002-PAN MTZJ10B-EIC MTZJ5.6B-EIC 1N4002-PAN 11E1-EIC MTZJ5.6B-EIC 1SS133T-77 1SS133T-77 MTZJ18B-EIC 1SS133T-77 1N4937-PAN RM11C-EIC RM11C-EIC MTZJ18B-EIC 1SS133T-77 1SS133T-77 MTZJ3.6B-EIC RM11C-EIC RM11C-EIC 21DQ09N-TA2B1 1N4937-PAN 21DQ09N-TA2B1 21DQ09N-TA2B1 RU2AM-EIC 1SS133T-77 30PRA60-FC 21DQ09N-TA2B1 MTZJ12B-EIC 1SS133T-77 1SS133T-77 MTZJ2.2B-EIC 1N4937 MTZJ3.9B-EIC 1SS355 TE-17 1SS355 TE-17 1SS355 TE-17 1SS355 TE-17 1SS355 TE-17 1SS355 TE-17 1SS355 TE-17 1SS355 TE-17 ICS ! ! ! ! ! ! OEC6087A PST3231NR AT24C04N-10SU-2.7 AN7513 AN7513 LA78040N-E M61277FP-DF0H AN5829S-E1V LA6565VR-TLM-E BA00BC0WT-V5 KIA278R05PI PS2561AL1-1-V(W) ZR36862PQCG-B BA33E00WHFP-TR SST39VF1601-70-4C-EKE M12L16161A-7TG PCM1753DBQR TRANSISTORS ! ! ! ! J3-2 KTC3875S_Y_RTK KTA1504S_Y_RTK 2SA1624-AA 2SC2909(S,T)-AA 2SA1371(D,E)-AE KTC3227_Y-AT 2SC5885 KTC3875S_Y_RTK KTC3875S_Y_RTK KRA102SRTK ELECTRICAL REPLACEMENT PARTS LIST Location No. TSB P/N Reference No. Description TRANSISTORS ! Q804 ! Q805 ! Q806 Q2201 Q2301 Q2302 Q2303 Q2304 Q2305 ! Q3001 ! Q3002 Q3003 ! Q3005 Q3007 ! Q3008 Q3800 ! Q3802 ! Q3803 Q3804 Q4201 Q4202 Q4203 Q4204 Q4205 Q4206 72795971 72795971 72795971 72794567 72795964 72795965 72794571 72794571 72794571 72796092 72796092 72795962 72794570 72795962 72795476 72794577 72795476 72795539 72794559 72794571 72795966 72794571 72794571 72794558 72794567 TC3F042170 TC3F042170 TC3F042170 TNAAC05002 T67J1036K0 T67J048TL0 TCAA3875SY TCAA3875SY TCAA3875SY TAAT01281Y TAAT01281Y TNAAB05003 TCAT03209Y TNAAB05003 TCAT032034 TCATC31980 TCAT032034 T25F035630 TNYJD05001 TCAA3875SY TPYJA05001 TCAA3875SY TCAA3875SY TNAAD05001 TNAAC05002 TRANSISTOR,SILICON TRANSISTOR,SILICON TRANSISTOR,SILICON COMPOUND TRANSISTOR TRANSISTOR,SILICON TRANSISTOR,SILICON TRANSISTOR,SILICON TRANSISTOR,SILICON TRANSISTOR,SILICON TRANSISTOR,SILICON TRANSISTOR,SILICON COMPOUND TRANSISTOR TRANSISTOR,SILICON COMPOUND TRANSISTOR TRANSISTOR,SILICON TRANSISTOR,SILICON TRANSISTOR,SILICON FET COMPOUND TRANSISTOR TRANSISTOR,SILICON COMPOUND TRANSISTOR TRANSISTOR,SILICON TRANSISTOR,SILICON COMPOUND TRANSISTOR COMPOUND TRANSISTOR L001 L101 L401 L402 L601 L603 L604 L801 L902 ! L3800 ! L3801 L4001 L4002 L4202 L8102 L8103 T401 ! T3800 72796407 72796582 72794527 72794528 72794540 72794540 72796087 72796499 72794540 72796403 72798949 72795936 72796088 72794540 72795943 72795943 72795487 72796694 02167D101K 021LA6560K 021679472K 022100027A 02167F101J 02167F101J 02167E100K 021673560K 02167F101J 028R140023 029X000131 02167F2R2J 02AHB9A972 02167F101J 02167F1R0K 02167F1R0K 045009003J 0481300054 COIL COIL COIL COIL,LINEARITY COIL COIL COIL COIL COIL COIL,DEGAUSS COIL,LINE FILTER COIL CORE,FERRITE COIL COIL COIL TRANS,HORIZONTAL DRIVE TRANSFORMER,SWITCHING ! J801 ! J2201 J2202 J2203 J2204 J4201 72795491 72794516 72795924 72795925 72795926 72796734 066F120018 060J131016 060J421036 060J421037 060J421030 060J401102 SOCKET,CATHODE RAY TUBE HEADPHONE JACK RCA JACK RCA JACK RCA JACK RCA JACK SW2213 SW2214 SW2215 SW2216 SW2217 SW2218 SW2219 SW2220 SW2221 SW2223 72794688 72794688 72794688 72794688 72794688 72794688 72794688 72794688 72794688 72794688 0504101T34 0504101T34 0504101T34 0504101T34 0504101T34 0504101T34 0504101T34 0504101T34 0504101T34 0504101T34 SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT SWITCH,TACT VR402 VR3800 72795471 72796061 V1K63H3BTE V1K63Q2BTE PCB110 PCB130 PCBD20 72783639 72784119 72784120 A5W201Y110L A5W202Y130L A5W202YD20L PCB ASS'Y PCB ASS'Y PCB ASS'Y B2301 B2302 B2303 B2304 B2305 72795787 72795787 72795787 72795787 72795787 0246C51024 0246C51024 0246C51024 0246C51024 0246C51024 CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS 2SC4217(D,E)-RAC 2SC4217(D,E)-RAC 2SC4217(D,E)-RAC KRC103SRTK 2SA1036KT146 2SA2048TL KTC3875S_Y_RTK KTC3875S_Y_RTK KTC3875S_Y_RTK KTA1281_Y KTA1281_Y KRC102SRTK KTC3209_Y-AT KRC102SRTK KTC3203_Y-AT KTC3198-AT(Y,GR) KTC3203_Y-AT 2SK3563(ORION_Q) DTC144EKAT146 KTC3875S_Y_RTK DTA143EKAT146 KTC3875S_Y_RTK KTC3875S_Y_RTK KRC104SRTK KRC103SRTK COILS &TRANSFORMERS 100 UH 56 UH 4.7 MH ELH5L4113 100 UH 100 UH 10 UH 56 UH 100 UH 8R140023 SS26V-R150162 2.2 UH W5T29X7.5X19 100 UH 1 UH 1 UH ETH09K14BZ 81300054 JACKS ISMS01S MSJ-2000_AG MTJ-032-05A-30-FE MTJ-032-05A-32-FE MTJ-032-05A-31-FE MSP-251V-05NI-FE-LF SWITCHES EVQ21505R EVQ21505R EVQ21505R EVQ21505R EVQ21505R EVQ21505R EVQ21505R EVQ21505R EVQ21505R EVQ21505R VARIABLE RESISTORS VOLUME,SEMI FIXED VOLUME,SEMI FIXED NVG6TLTAB222 NVG6TLTAB471 P.C.BOARD ASSEMBLIES CCE062B DME060A CME066B MISCELLANEOUS J3-3 MMZ1608R102CT MMZ1608R102CT MMZ1608R102CT MMZ1608R102CT MMZ1608R102CT ELECTRICAL REPLACEMENT PARTS LIST Location No. ! ! ! ! ! ! ! ! ! ! B3800 B4001 B4002 B4003 B4005 B4006 B4007 B4008 B4009 B4010 B4011 B4012 B4013 B4014 B4016 B4018 B4201 B8103 BL001 BT001 BT002 CD301 CD302 CD801 CD802 CD803 CP101 CP301 CP302 CP401 CP805 CD3800 CD4002 CD8101 CP2301 CP2302 CP2303 CP3800 CP8001 CP8002 CP802A CP802B CP803A CP803B CP8101 ELD201 ELD202 F3800 FB401 FH3800 FH3801 OS2202 SP351 SP352 TM101 TU001 TH3800 V801 X101 X602 X4001 TSB P/N 72794355 72795787 72795787 72795787 72795787 72795787 72795787 72795787 72795787 72795787 72795787 72795787 72795787 72795787 72795787 72795787 72794357 72795787 72782870 72783174 72783174 72796873 72796873 72796910 72798414 72798395 72796804 72799049 72799049 72796822 72796816 72795554 72783178 72797046 72783177 72799012 72799013 72796821 72796810 72796776 72796752 72796752 72796750 72796750 72799040 72797069 72797070 72794493 72783642 72794496 72794496 72783180 72799165 72799165 72783179 72783175 72797351 72783643 72796990 72794703 72783182 Reference No. 024HT03563 0246C51024 0246C51024 0246C51024 0246C51024 0246C51024 0246C51024 0246C51024 0246C51024 0246C51024 0246C51024 0246C51024 0246C51024 0246C51024 0246C51024 0246C51024 024HT03553 0246C51024 023C00022A 141U004016 141U004016 06CU123801 06CU123801 06CU82039A WDL6032038 WBL6026038 069S290629 069W120459 069W120459 069S450089 069S320010 1209414909 06CU2D2202 122F0C1602 069KYOT159 069EV53030 069EV63030 069S420110 069S2D0629 069J7C0599 067U006049 067U006049 067U004029 067U004029 069J7C0589 124116281A 124120301A 081PC6R305 043214061Y 06710T0009 06710T0009 077A031002 070N533032 070N533032 076D0MG010 0163300020 DF20C3R0Q0 098Q150414 1002T01606 100CT3R505 100GT02720 Description MISCELLANEOUS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS CORE,BEADS COIL,BALUN BATTERY,MANGAN BATTERY,MANGAN CORD,CONNECTOR CORD,CONNECTOR CORD,CONNECTOR FLAT CABLE FLAT CABLE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CORD,AC BUSH CORD,CONNECTOR CORD,JUMPER CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE CONNECTOR PCB SIDE WIRE HOLDER WIRE HOLDER WIRE HOLDER WIRE HOLDER CONNECTOR PCB SIDE EYE LET EYE LET FUSE TRANSFORMER,FLYBACK HOLDER,FUSE HOLDER,FUSE REMOTE RECEIVER SPEAKER SPEAKER TRANSMITTER RF UNIT DEGAUSS ELEMENT CRT W/DY CERAMIC OSCILLATOR CRYSTAL CRYSTAL RESISTOR RC................... CARBON RESISTOR CAPACITORS CC................... CERAMIC CAPACITOR CE................... ALUMI ELECTROLYTIC CAPACITOR CP................... POLYESTER CAPACITOR CPP................. POLYPROPYLENE CAPACITOR CPL................. PLASTIC CAPACITOR CMP................ METAL POLYESTER CAPACITOR CMPL.............. METAL PLASTIC CAPACITOR CMPP.............. METAL POLYPROPYLENE CAPACITOR J3-4 W4BRH3.5X6X1.0X2 MMZ1608R102CT MMZ1608R102CT MMZ1608R102CT MMZ1608R102CT MMZ1608R102CT MMZ1608R102CT MMZ1608R102CT MMZ1608R102CT MMZ1608R102CT MMZ1608R102CT MMZ1608R102CT MMZ1608R102CT MMZ1608R102CT MMZ1608R102CT MMZ1608R102CT W5RH3.5X5X1.0 MMZ1608R102CT HPN-01 MNAAA(R03) MNAAA(R03) CU123801 CU123801 SM1098-009-1A AWM2468 AWG26 6C BLACK 320MM AWM2468 AWG26 4C BLACK 260MM A2001WV2-9P 213213102W1 213213102W1 A1561WV2-A5P A2361WV2-2P 9414909 CU2D2202 2F0C1602 LD07T2-24ND-03 00_6232_005_006_800+ 00_6232_006_006_800+ A1561WV2-2P A2001WV2-13P IMSA-9604S-12C B2013H02-6P B2013H02-6P B2013H02-4P B2013H02-4P IMSA-9604S-12F XRY16X28BD XRY20X30BD 51MS063L FQI14B007_T EYF-52BCY EYF-52BCY ROM-N3138SR YDP47-6 YDP47-6 ORT204N7405860-Z 115-V-KA35ARE PTDCA1BF3R0Q100 A36AKJ13X02 C(M) CSTLS16M0X53-A0 HC-49/U B27000C005 TOSHIBA CORPORATION 1-1, SHIBAURA 1-CHOME, MINATO-KU, TOKYO 105-8001, JAPAN
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2006:02:22 14:47:28 Producer : Acrobat Distiller 4.05 for Macintosh Modify Date : 2006:02:24 11:57:34+09:00 Page Count : 69EXIF Metadata provided by EXIF.tools