MFT200CT Instructions MFCT200_000DMI MFCT200 000DMI
User Manual: MFCT200_000DMI
Open the PDF directly: View PDF .
Page Count: 7
Download | |
Open PDF In Browser | View PDF |
Congratulations on the purchase of your new DMI Sports Pool table. Our products are designed and manufactured to give you years of game playing enjoyment. KEEP BOX AND PACKING MATERIAL UNTIL TABLE HAS BEEN COMPLETELY ASSEMBLED. ALL DAMAGE MUST BE REPORTED TO DMI WITHIN TEN DAYS OF RECEIPT. If you have any problems with your new product, PLEASE DO NOT RETURN IT TO THE STORE. Please contact us: 1.800.399.4402 FAX: 215.283.9573 Please have your model number when inquiring about parts. Or write to: DMI Sports Customer Service 375 Commerce Drive Fort Washington PA, 19034 Please visit our web site at: www.dmisports.com When contacting DMI Sports, please provide your model number and item number (if applicable) if requesting a replacement part. Item numbers can be found inside this owners manual. MFT200-CT Your Model Number _______________________ Your model number is also located on the original carton. These instructions are also available online at: www.dmisports.com. DMI Sports For Customer Service Call 1.800.399.4402 0101005 IMPORTANT! Please Keep Your Instructions! (You will need your Model number should you need to contact us.) Before attempting assembly, please read through this instruction book to familiarize yourself with all the parts and assembly steps. We recommend that two adults assemble this table. Please refer to the Parts Identifier on the following page and be sure that all parts have been included. Although extremely rare, occasionally a part may be missing. If you are missing a part, or if you have any questions, please call our customer service department at 1.800.399.4402 Mon-Fri between the hours of 9:00am and 5:00pm E.S.T; or you can reach us at: www.dmisports.com. Do not return the game to the store. Please contact us first at: 1.800.399.4402 or on our website at: www.dmisports.com. TWO ADULTS ARE REQUIRED TO ASSEMBLE THIS POOL TABLE DMI Sports -2- For Customer Service Call 1.800.399.4402 PARTS IDENTIFIER HARDWARE PARTS H1 Qty. 8 H2 Leg Bolt RPMFT200-BOLT Qty. 8 Leg Washer RPMFT200-WASH ASSEMBLY PARTS P1 Qty. 1 Main Frame RPMFT200-TABLE P5 Qty. 2 P3 P2 Qty. 1 Conversion Top MFCT-200 Leg RPMFT200-LEG P4 Qty. 1 Table Tennis Net Set MFCT-200NP Qty. 4 Leg Levelers RPMFT200-LEV ACCESSORY PARTS A1 Qty. 1 Triangle, Plastic MFA40993 A5 A2 Qty. 2 A3 Chalk MFA42405 Qty. 1 Billiard Balls MFA41655 A4 Qty. 2 2 Piece Billiard Cues MFR40432 Qty. 1 Wrench, Multi RPMFT200-MWRENCH DMI Sports -3- For Customer Service Call 1.800.399.4402 ASSEMBLY STEP 1. Carefully remove all parts from the box. Attach Legs (P2) to the Main Frame (P1) using Bolts (H1) and Washers (H2) as shown in Fig. 1.1. P2 H2 P1 H1 FIG 1.1 STEP 2. Attach Leg Levelers (P5) to each Leg (P2) as shown below in FIG 2.1. P5 FIG 2.1 DMI Sports -4- For Customer Service Call 1.800.399.4402 ASSEMBLY STEP 3. With the assistance of at least one other adult, carefully turn your table over. Please refer to page 6 for leg leveling instructions. FIG 3.1 Conversion Top Assembly The conversion top comes in two parts. Attach the two parts as shown in Fig. 4.1. Once the two sides of the conversion top are combined, attach the net as shown in Figure 5.1. FIG 4.1 FIG 5.1 DMI Sports -5- For Customer Service Call 1.800.399.4402 INSTRUCTIONS FOR LEVELING A POOL TABLE • Assemble pool table according to the instructions, making sure levelers are screwed in completely, then turning one full turn out. • Any type of level would be sufficient to perform this procedure. However, a two-foot level is recommended. • Before leveling, make sure level is placed on the playing surface, not the rails. • Level the ends between the corner pockets. Place the level on the playing surface between the two corner pockets and adjust the levelers in or out to position the bubble in the middle of the level. • Repeat the step above to the opposite corner pockets. • Next, level the length of the table. Place the level next to the side pocket and adjust the levelers in or out to position the bubble in the middle of the level. • Repeat the step above to the opposite length of the table. • Recheck both short ends to ensure bubble is in the middle on the level. • Depending on the surface the pool table sits, especially deep pile carpeting, the pool table needs to settle for 24 hours. Recheck the level on each side of the table after 24 hours. • These same instructions may be followed to level hockey and soccer table play surfaces as well. DMI Sports -6- For Customer Service Call 1.800.399.4402 PARTS RE-ORDER FORM DATE: NAME: ADDRESS: CITY: REF QTY H1 H2 A1 A2 A3 A4 A5 P2 P3 P4 P5 MFT200-CT Pool Table DMI SPORTS 375 Commerce Drive Fort Washington, PA 19034 www.dmisports.com PHONE: STATE: ZIP CODE: PART# DESCRIPTION RPMFT200-BOLT RPMFT200-WASH MFA40993 MFA42405 MFA41655 MFR40432 RPMFT200-MWRENCH RPMFT200-LEG MFCT-200 MFCT-200NP RPMFT200-LEV Leg Bolt Leg Washer Triangle, Plastic Chalk Billiard balls 2 Piece Cues Wrench, Multi Leg Conversion Top Table Tennis Net Set Leg levelers SHIPPING AND HANDLNG: Up to $15.00 add $2.00 for S&H Over $15.00 add $8.00 for S&H DMI Sports Send this form along with your check or money order payable to: (ea.) (ea.) (ea.) (ea.) (ea.) (ea.) (ea.) (ea.) (ea.) (ea.) (ea.) UNIT PRICE .25 .25 8.00 N/A 30.00 12.00 8.00 30.00 85.00 15.00 5.00 TOTAL AMOUNT Subtotal: PA Residents Add 6% State Sales Tax: Shipping and Handling Charges: TOTAL: For Customer Service Call 1.800.399.4402
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Page Count : 7 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:0aa4702b-3a99-11da-abe8-000393bf4750 Create Date : 2005:08:03 08:55:27Z Metadata Date : 2005:10:11 16:53:14-04:00 Modify Date : 2005:10:11 16:53:14-04:00 Creator Tool : Adobe InDesign CS (3.0) Rendition Class : proof:pdf Derived From Instance ID : 4df5cb48-e962-11d9-9167-fd2abad79975 Derived From Document ID : adobe:docid:indd:c31d9efa-e63e-11d9-bade-8e1b952421c5 Document ID : adobe:docid:indd:aace67b5-058e-11da-b4c6-f7e233274392 Manifest Link Form : DirectStream, DirectStream, DirectStream Manifest Reference Instance ID : uuid:f48dc8ea-0b38-11da-aade-e3bbc511699a, uuid:47740716-0b2c-11da-aade-e3bbc511699a, uuid:5ab86c5c-0b30-11da-aade-e3bbc511699a Manifest Reference Document ID : adobe:docid:photoshop:2b69472e-0b32-11da-aade-e3bbc511699a, adobe:docid:photoshop:47740715-0b2c-11da-aade-e3bbc511699a, adobe:docid:photoshop:24008592-0b26-11da-aade-e3bbc511699a Format : application/pdf Title : MFT200CT Instructions.indd Tagged PDF : Yes Trapped : False Creator : Adobe InDesign CS (3.0) Producer : Adobe PDF Library 6.0EXIF Metadata provided by EXIF.tools