Table Of Contents J 3000 MLCC Product Catalog

User Manual: J-3000

Open the PDF directly: View PDF .
Page Count: 47

Download
Open PDF In Browser	View PDF

Table of contents
INDEX
Subject

Page

Quick Product Information ...……….……………………………………………………………..………………………………. 1
How To Order and Packaging Dimension/Quantity …….….….……………...………………………………………………. 2
The Outlines and External Dimensions of Capacitors …..……………………………...……………………………………. 3
General Purpose Caps (4V~100V) .…..………………………………………………………………………………………….…4
Ultra-small Caps (01R5 series) .…..……………………………………………………………………………………...………...9
Middle & High Voltage Caps (200V~3kV) ……………………………………………………………………..………...………10
High Q & Low ESR Caps (HH series) …………………………………………………………….….……………………......…13
Microwave Caps (RF series) ……………………….…………………………………………….….…………...……….………15
Soft Termination Capacitors (SH series) ……….………………………………………………..……….……..………..…….17
High Temperature Caps (HT series) ………...…….….……………………………………………………………..……….….23
Open-mode Design Caps (OP series) …………….….……………………………………………………….……..……….….25
Capacitor Arrays (Y4C2/Y4C3 series) ........….……………... ………………………………………..............…...…………..27
Low Profile Caps (TT series) …………….….………………………………………………………………………..…………..28
Low Inductance Caps (0612 series) ...………….…………..………………………………………………………….………...29
Safety Certificated Caps X1/Y2 (S2 series) ……………………………………………………………………………………..30
Safety Certificated Caps X2 (S3 series) ..…….…………...…………………………………………………………………….31
Automotive Capacitor Qualified to AEC-Q200 (MT series) …..……………………………………………………….……..32
Automotive Caps Without AEC-Q200 Certification (MG series) …..…..……………………………………………..…….33
Automotive Capacitor Arrays Qualified to AEC-Q200 (MY series) …..…..…………………………………………..…….36
Appendix | : Reliability Test Conditions and Requirements ….……………..…………………………………….…………….38
Appendix || : General Information ……...…………………………………………………………………………...……………..43

*The specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our sales representatives or
product engineers before ordering.
*This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact
the approval sheet for product specifications before ordering.

1

Quick Product Information
■ QUICK PRODUCT INFORMATION
Series

Dielectric
NPO
X7R

General Purpose Caps
(6.3V~100V)

Soft Termination Capacitors
(SH series)

High Temperature Caps
(HT series)
Open-mode Design Caps
(OP series)

Low Profile Caps
(TT series)

Low Inductance Caps
(0612 series)
Safety Certificated Caps X1/Y2
(S2 series)

Safety Certificated Caps X2
(S3 series)

Automotive Capacitor Qualified
to AEC-Q200 (MT series)

Automotive Caps
Without AEC-Q200
Certification
(MG series)
Automotive Capacitor Arrays
Qualified AEC-Q200
(MY Series)

2

0.1pF~0.27μF

10V, 16V, 25V, 50V, 100V

100pF~47μF

6.3V, 10V, 16V, 25V, 50V, 100V
6.3V, 10V, 16V, 25V

X7S

0402, 0603, 0805, 1206,1210

1.0μF~100μF

6.3V, 10V, 16V, 25V, 50V, 100V

100pF~220μF

6.3V, 10V, 16V, 25V, 50V

0.01μF~100μF

6.3V, 10V, 16V, 25V, 50V, 100V

4
0201, 0402, 0603, 0805,
1206,1210
0402, 0603, 0805, 1206, 1210,
1812

NPO

01005

0.2pF~100pF

16V

X7R

01005

100pF~1000pF

10V

X5R

01005

1000pF~0.1μF

6.3V,10V

X7R

0603, 0805, 1206, 1210, 1808,
1812,1825,2220,2225
0603, 0805, 1206, 1210, 1808,
1812,1825,2220,2225

0.5pF~0.12μF
100pF~2.2μF

200V, 250V, 500V, 630V, 1kV, 2kV,
3kV, 4kV
200V, 250V, 400V, 450V, 500V, 630V,
1kV, 2kV, 3kV, 4kV

Y5V

0805, 1206, 1210,1812

0.01μF~0.68μF

200V, 250V

NPO

0201,0402, 0603,0805

0.3pF to 3300pF

10V,16V, 25V, 50V, 100V, 200V, 250V,
500V, 630V

NPO
NPO
X7R

01005, 0201,0402,0603,
0805,0505,1111
0402,0603, 0805,1206, 1210,
1808, 1812,1825,2220,2225
0402,0603, 0805,1206, 1210,
1808, 1812,1825,2220,2225

6.3V, 10V, 25V,
50V,100V,250V,500V,1500V
10V,16V,25V,50V,100V,200V,250V,50
0.5pF~0.22μF
0V,630V,1kV, 3kV
10V,16V,25V,50V,100V,200V,250V,50
100pF~22μF
0V,630V, 1kV,2kV, 3kV

0.1pF~1000pF

X8G

0402,0603, 0805,1206, 1210

0.2pF~0.01μF

10V,16V,25V,50V,100V

X8R

0603, 0805,1206,

100pF~0.1μF

10V,16V,25V,50V

X7R

0805, 1206, 1210, 1812

100pF~1μF

100V, 200V, 250V, 500V

10pF~470pF

25V, 50V,100V

180pF~0.1μF

10V, 16V, 25V, 50V

9

10

13
15

17

23

NPO
Capacitor Arrays
(Y4C2/Y4C3 series)

Page

0.1μF~100μF

NPO

High Q & Low ESR Caps
(HH series)
Microwave Caps
(RF series)

Rated voltage

0402, 0603, 0805, 1206,1210

Y5V

Middle & High Voltage Caps
(200V~4kV)

Capacitance

X6S

X5R

Ultra-small Caps
(01R5 series)

Size
0201, 0402, 0603, 0805, 1206,
1210, 1812,1825,2220,2225
0201, 0402, 0603, 0805, 1206,
1210, 1812,1825,2220,2225

X7R

0508 (4x0402),
0612 (4x0603)
0508 (4x0402),
0612 (4x0603)

Y5V

0612 (4x0603)

0.01μF~0.1μF

16V, 50V

X7R

0805, 1206

0.22μF~4.7μF

10V, 16V, 25V, 50V

X5R

0603, 0805, 1206, 1210

0.22μF~22μF

6.3V, 10V, 16V, 25V, 50V

Y5V

0805, 1206, 1210

1μF~10μF

10V, 16V, 25V, 50V

X7R

0612

0.01μF~0.15μF

50V

NPO

1808, 1812, 2211

4pF~680pF

250Vac

X7R

1808, 1812, 2220, 2211

100pF~4700pF

250Vac

NPO

1808, 1812

3.9pF~1000pF

250Vrms

X7R

1808, 1812

150pF~5600pF

250Vrms

NPO

0201, 0402, 0603,
0805, 1206, 1210

0.5pF~0.39μF

X7R

0402, 0603, 0805, 1206, 1210

100pF~1μF

0402, 0603, 0805,
1206, 1210, 1812
0402, 0603, 0805,
1206, 1210, 1812

0.5pF~0.033μF

10V,16V,25V,50V,100V,200V,250V

100pF~2.2μF

10V,16V,25V,50V,100V,200V,250V

X5R

0402, 0603, 0805, 1206, 1210

0.056μF~10μF

6.3V,10V,16V,25V

NPO

0612(4x0603), 0508(4x0402)

10pF~220pF

16V, 25V, 50V, 100V

X7R

0612(4x0603), 0508(4x0402)

470pF~0.1μF

10V, 16V, 25V, 50V

25

27

28

29

30

31

NPO
X7R

10V,16V,25V,50V,100V, 250V, 500V,
630V
10V,16V,25V,50V,100V, 250V, 500V,
630V,1kV

32

33

36

How To Order and
Packaging Dimension/Quantity
■ HOW TO ORDER
Type of MLCC

General Purpose MLCC
Middle & High Voltage
MLCC
Ultra-small MLCC

Low Inductance MLCC

High Q / Low ESR
MLCC
Microwave MLCC
Low Profile MLCC
Open Mode MLCC
Safety Certificated LCC
Automotive MLCC

Soft Termination MLCC

0805

B

Size
01R5 (0402),
0402 (1005),
0805 (2012),
1210 (3225),
1812 (4532),
2220 (5750),

Inch (mm) :
0201 (0603),
0603 (1608),
1206 (3216),
1808 (4520),
1825 (4563),
2225 (5763)

N=NP0
G=X8G
R=X8R
B=X7R

0612 (1632)

A=X7S

RF

03

Series
HH=High Q/ Low ESR
RF=Microwave
TT=Low profile
OP=Open-mode design
S2=X1/Y2 safety class
S3=X2 safety class
MG=Automotive Cap.
without AEC-Q200
MT=Automotive Cap.
with AEC-Q200
MY=Automotive Array
with AEC-Q200

Size
Inch :
02=01005
03=0201
15=0402
11=0505
18=0603
21=0805
22=1111
31=1206
32=1210
42=1808
43=1812
52=2211
55=2220
56=2225

SH=With Ag polymer

Y

4C

3

Type

Cap. Nr.

Termination
pitch

Cap Arrays MLCC

104

K

Dielectric Capacitance Tolerance

S=X6S
X=X5R
F=Y5V

Two
A=
significant
±0.05pF
digits
B= ±0.1pF
followed by
C=
no. of zeros. ±0.25pF
And R is in
D= ±0.5pF
place of
F= ±1%
decimal
G= ±2%
point.
J= ±5%
K= ±10%
R47=0.47pF M= ±20%
0R5=0.5pF
1R0=1pF
Z=-20/+80%
100=10pF
101=100pF
102=1000pF
103=0.01uF
104=0.1uF
105=1uF
106=10uF
107=100uF

500

C

T

Rated voltage

Termination

Packaging

Two significant L=Ag/Ni/Sn
digits followed C=Cu/Ni/Sn
by no. of zeros.
And R is in
place of decimal
point.
4R0=4 Vdc
6R3=6.3 Vdc
100=10 Vdc
160=16 Vdc
250=25 Vdc
350=35 Vdc
500=50 Vdc
101=100 Vdc
201=200 Vdc
251=250 Vdc
401=400 Vdc
451=450 Vdc
501=500 Vdc
631=630 Vdc
102=1k Vdc
152=1.5k Vdc
202=2k Vdc
252=2.5k Vdc
302=3k Vdc
402=4k Vdc
502=5k Vdc
602=6k Vdc

T=7” reeled
Q=10” reeled
G=13” reeled

L=Ag/Ni/Sn
C=Cu/Ni/Sn
P=Cu/Polymer
/Ni/Sn

SH:C=
Ag
polymer/Ni/Sn

C=Cu/Ni/Sn

Y=Capacitor 4C=4xCap 3=0.03 inch
array
2=0.02 inch
* The packaging code per each size of reel, please refer to following table "packaging style and quantity".

■ PACKAGING STYLE AND QUANTITY
Size
01005 (0402)
0201 (0603)
0402 (1005)
0603 (1608)

0805 (2012)

1206 (3216)

1210 (3225)

1808 (4520)

1812 (4532)

1825 (4563)
2220 (5750)
2225 (5763)

Thickness (mm)/Symbol

Paper tape

Plastic tape

7” reel

13” reel

7” reel

13” reel

0.20±0.02

V

20,000

-

40,000(W4P1)-

-

0.30±0.03
0.50±0.05
0.50+0.02/-0.05
0.50±0.20
0.50±0.10
0.80±0.07
0.80+0.15/-0.10
0.50±0.10
0.60±0.10
0.80±0.10
0.85±0.10
1.25±0.10
1.25±0.20
0.80±0.10
0.85±0.10
0.95±0.10
1.15±0.15
1.25±0.10
1.60±0.20
1.60+0.30/-0.10
0.85±0.10
0.95±0.10
1.25±0.10
1.60±0.20
2.00±0.20
2.50±0.30
1.25±0.10
1.10±0.15
1.60±0.20
2.00±0.20
1.25±0.10
1.60±0.20
2.00±0.20
2.50±0.30
2.80±0.30
1.60±0.20
2.00±0.20
2.50±0.30
2.80±0.30

L
N
Q
E
H
S
X
H
A
B
T
D
I
B
T
C
J
D
G
P
T
C
D
G
K
M
D
F
G
K
D
G
K
M
U
G
K
M
U

15,000
10,000
10,000
10,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
4,000
-

70,000
50,000
50,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
15,000
-

3,000
3,000
3,000
3,000
3,000
2,000
2,000
3,000
3,000
3,000
2,000
1,000
1,000
2,000
2,000
2,000
1,000
1,000
1,000
1,000
500
500
1,000
1,000
500
500

10,000
10,000
10,000
10,000
10,000
10,000
9,000
10,000
10,000
10,000
6,000
6,000
10,000
10,000
8,000
6,000
5,000
3,000
Unit: pieces
3

The Outlines and
External Dimensions of Capacitors
■ SINGLE CHIP CAPACITORS
Outline

Size
Inch (mm)
01R5 (0402)
0201 (0603)

0402 (1005)

0603 (1608)

L (mm)

W (mm)

0.4±0.02
0.6±0.03
0.6±0.05#2
#3
0.6±0.09

0.2±0.02
0.3±0.03
0.3±0.05#2
#3
0.3±0.09

1.00±0.05

0.50±0.05

1.00±0.20
1.60±0.10

0.50±0.20
0.80±0.10

1.60+0.15/-0.10

0.80+0.15/-0.10

#1

1.60±0.20

0.80±0.20

2.00±0.15

#1

1.25±0.10

0805 (2012)
2.00±0.20

1.25±0.20

3.20±0.15

1.60±0.15

1206 (3216)
3.20±0.20

Soldering
Method *

MB (mm)

V

R

0.10±0.03

L

R

T (mm)/Symbol

1.60±0.20

3.20 +0.30/-0.10

1.60 +0.30/-0.10

3.20±0.30

2.50±0.20

3.20±0.40

2.50±0.30

3.20±0.60#4

2.50±0.50#4

1808 (4520)

4.50±0.40
(4.5+0.5/-0.3)**

2.03±0.25

1812 (4532)

4.50±0.40
(4.5+0.5/-0.3)**

1210 (3225)

3.20±0.30
3.20±0.40

0.2±0.02
0.3±0.03
0.3±0.05#2
#3
0.3±0.09
0.50±0.05
0.50+0.02/-0.05
0.5±0.20
0.80±0.07
0.50±0.10
0.80+0.15/-0.10
#1
0.8±0.20
0.50±0.10
0.60±0.10
0.80±0.10
1.25±0.10
0.85±0.10
1.25±0.20
0.80±0.10
0.95±0.10
1.25±0.10
1.15±0.15
1.60±0.20
0.85±0.10
1.60+0.30/-0.10
0.95±0.10
0.85±0.10
1.25±0.10
1.60±0.20
2.00±0.20
2.50±0.30
2.50±0.50#4
1.25±0.10
1.40±0.15
1.60±0.20
2.00±0.20
1.25±0.10
1.60±0.20
2.00±0.20
2.50±0.30
2.80±0.30

0.15±0.05
0.15+0.1/-0.05

N
Q
E
S
H

R
R
R
R/W
R/W

X

R/W

H
A
B
D
T
I
B
C
D
J
G
T
P
C
T
D
G
K

R/W
R/W
R/W
R
R/W
R
R/W
R
R
R
R
R/W
R
R
R
R
R
R

M

R

D
F
G
K
D
G
K
M
U

R
R
R
R
R
R
R
R
R
R
R
R
R

1825 (4563)
4.60±0.50
6.30±0.40
1.60±0.20 (G) 2.00±0.20
2211 (5728)
5.70±0.50
2.80±0.30
(K)
2.50±0.30 (M)
2220 (5750)
5.70±0.50
5.00±0.40
2.80±0.30
(U)
2225 (5763)
5.70±0.50
6.30±0.40
* R = Reflow soldering process ; W = Wave soldering process.
** For 1808_200V ~3kV, 1812_200V~3kV and safety certificated products.
*** For 1206_1000V ~3kV,1808_200V ~3kV, 1812_200V~3kV and safety certificated products.
#1 : For0603/Cap≧10μF or 0603(≦6.3V)/Cap≧4.7μFor 0603(>10V)/Cap>1μF products.
#2 : For 0201/Cap≧0.68μF products.
#3 : For 0201/Cap ≧1μF products.
#4 : For 1210(100V)/Cap>1μF or 1210(250V)/Cap>0.47μF or 1210(400V~630V)/Cap>0.22μF.
The table only for General Purpose Series, Soft termination and others please refer to individual sheet for details.

0.25
+0.05/-0.10

0.40±0.15

0.50±0.20

0.60±0.20
(0.5±0.25)***

0.75±0.25

0.75±0.25
(0.5±0.25)***

0.75±0.25
(0.5±0.25)***
≧0.26
≧0.30
≧0.30
≧0.30

■ Capacitor Arrays
Outline

Size
Inch (mm)

L (mm)

W (mm)

T (mm)/Symbol

S (mm)

BW (mm)

P (mm)

0603 x 4
(0612 (1632)

3.20±0.15

1.60±0.15

0.80±0.10

B

0.30±0.20

0.40±0.15

0.80±0.15

0402 x 4
(0508 (1220)

2.00±0.15

1.25±0.15

0.85±0.10

T

0.20±0.10

0.25±0.10

0.50±0.10

Reflow soldering process only.

■ Low Inductance Capacitors
Outline

Reflow soldering process only.
4

Size
Inch (mm)

L (mm)

W (mm)

T (mm)/Symbol

0612 (1632)

3.20±0.15

1.60±0.15

0.80±0.10

B

Ta min. (mm)

Tb min. (mm)

0.5

0.13

General Purpose Capacitors
4V~100V
■ FEATURES
* A wide selection of sizes is available (0201 to 2225).
* High capacitance in given case size.
* Capacitor with lead-free termination (pure Tin).

■ GENERAL ELECTRICAL DATA
Dielectric

NP0

X7R

X7S

X6S

X5R

Y5V

0201, 0402, 0603, 0805, 1206, 1210, 1812, 1825, 2220, 2225

Size
0.1pF to 0.27μF

Capacitance range

Capacitance tolerance

Cap≤5pF#1:
A (±0.05pF), B (±0.1pF),
C (±0.25pF)
5pF10pF: J (±5%)

Capacitance tolerance**

K (±10%), M (±20%)

Rated voltage (WVDC)

16V, 25V

10V

6.3V, 10V

Operating temperature

-55 to +125°C

-55 to +125°C

-55 to +85°C

Capacitance change

±30ppm

±15%

Termination

Ni/Sn (lead-free termination)

■ EXPLANATION OF PART NUMBERS
01R5

N

100

J

160

C

T

Size (Inch (mm))

Dielectric

Capacitance

Tolerance

Rated voltage

Termination

Packaging

01R5 =01005 (0402)

N=NP0(C0G)

100=10x100=10pF

J=±5%

160=16 VDC

C=Cu/Ni/Sn

T=7” reeled

Please refer to page 2 “ How to order” for more information.

■ CAPACITANCE RANGE
SIZE

01R5

DIELECTRIC

NP0

SIZE

01R5

DIELECTRIC

X7R

RATED VOLTAGE (VDC)

10

16
V

V

V

0.3pF (0R3)

V

V

V

100pF (101)

0.4pF (0R4)

V

V

V

120pF (121)

0.5pF (0R5)

V

V

V

1.0pF (1R0)

V

V

V

1.5pF (1R5)

V

V

V

2.0pF (2R0)

V

V

V

3.0pF (3R0)

V

V

V

4.0pF (4R0)

V

V

V

5.0pF (5R0)

V

V

V

6.0pF (6R0)

V

V

V

7.0pF (7R0)

V

V

V

8.0pF (8R0)

V

V

V

9.0pF (9R0)

V

V

V

10pF (100)

V

V

V

820pF (821)

12pF (120)

V

V

V

1,000pF (102)

15pF (150)

V

V

V

18pF (180)

V

V

V

22pF (220)

V

V

V

27pF (270)

V

V

V

33pF (330)

V

V

V

39pF (390)

V

V

V

47pF (470)

V

V

V

56pF (560)

V

V

V

68pF (680)

V

V

V

1,500pF (152)

V

82pF (820)

V

V

V

2,200pF (222)

V

100pF (101)

V

V

V

3,300pF (332)

V

4,700pF (472)

V

1. The letter in cell is expressed the symbol of product thickness.
2. For more information about products with special capacitance
or other data, please contact WTC local representative

50
V

150pF (151)

V

180pF (181)
220pF (221)

Capacitance

25

V

270pF (271)
330pF (331)

V

390pF (391)
470pF (471)

V

560pF (561)
680pF (681)

V

SIZE

01R5

DIELECTRIC

X5R

RATED VOLTAGE (VDC)
1,000pF (102)

Capacitance

Capacitance

RATED VOLTAGE
(VDC)
0.2pF (0R2)

6.3

10

V

V

6,800pF (682)
0.010μF (103)

V
V

0.015μF (153)
0.022μF (223)

V

0.033μF (333)

V

0.047μF (473)

V

0.068μF (683)
0.10μF (104)

10

V

V

Middle & High Voltage Capacitors
200V~4000V
■ FEATURES
* High voltage in a given case size.
* High stability and reliability.

■ GENERAL ELECTRICAL DATA
Dielectric

NP0

Size

X7R

Y5V

0603, 0805, 1206, 1210, 1808, 1812, 1825, 2220, 2225

Capacitance
Capacitance tolerance

0805, 1206, 1210, 1812

0.5pF to 0.12µF

100pF to 2.2µF

0.01µF to 0.68µF

Cap≤5pF: C (±0.25pF)
5pF0.068uF_200V only.
3 For more information about products with special capacitance or other data, please contact WTC local representative.

13

High Q / Low ESR Capacitors
HH series
■ FEATURES
* High Q and low ESR performance at high frequency.
* Quality improvement of telephone calls for low power loss and better performance.

■ GENERAL ELECTRICAL DATA
Dielectric

NP0

Size

0201, 0402, 0603,0805

Capacitance

0.3pF to 3300pF

Capacitance tolerance

Cap≤5pF: B (±0.1pF), C (±0.25pF)
5pFMB) – circuit

Fig. 7 Floating design (one kind of

leakage during cracking.

open during cracking.

open-mode design) – circuit open during
cracking.

26

Open-mode Design Capacitors
OP series
■ CAPACITANCE RANGE
DIELECTRIC

X7R

SIZE

Capacitance

RATED VOLTAGE
(VDC)

0805

1206

100

200

250

500
630

100pF (101)

B

B

B

B

120pF (121)

B

B

B

B

150pF (151)

B

B

B

180pF (181)

B

B

B

220pF (221)

B

B

270pF (271)

B

330pF (331)

1210

50

100

200

250

500
630

B

B

B

D

D

D

B

B

B

D

D

D

B

B

B

B

D

D

D

B

B

B

B

B

D

D

D

B

B

B

B

B

B

D

D

D

390pF (391)

B

B

B

B

B

B

D

D

D

470pF (471)

B

B

B

B

B

B

D

D

D

560pF (561)

B

B

B

B

B

B

D

D

D

680pF (681)

B

B

B

B

B

B

D

D

D

820pF (821)

B

B

B

B

B

B

D

D

D

1,000pF (102)

B

B

B

B

B

B

D

D

1,200pF (122)

B

B

B

B

B

B

D

D

1,500pF (152)

B

B

B

B

B

B

D

1,800pF (182)

B

B

B

B

B

B

2,200pF (222)

B

B

B

B

B

2,700pF (272)

B

B

B

B

3,300pF (332)

B

B

B

3,900pF (392)

B

B

4,700pF (472)

B

5,600pF (562)

1812

100

200

250

500
630

D

C

C

C

D

D

D

D

D

D

C

C

C

D

D

D

D

D

D

D

C

C

C

D

D

D

D

D

D

D

D

C

C

C

D

D

D

D

D

B

D

D

D

C

C

C

D

D

D

D

D

B

B

D

D

D

C

C

C

D

D

D

D

D

B

B

B

D

D

D

C

C

C

D

D

D

D

D

B

B

B

B

D

D

D

C

C

C

D

D

D

D

D

B

B

D

B

B

D

D

D

C

C

C

D

D

D

D

D

B

D

D

D

B

B

D

D

D

C

C

C

D

D

D

D

D

6,800pF (682)

B

D

D

D

B

B

D

D

D

C

C

C

D

D

D

D

D

8,200pF (822)

B

D

D

D

B

B

D

D

D

C

C

C

D

D

D

D

D

0.010μF (103)

B

D

D

D

B

B

D

D

D

C

C

C

D

D

D

D

D

0.012μF (123)

B

D

D

B

B

D

D

D

C

C

C

D

D

D

D

D

0.015μF (153)

B

D

D

B

B

D

D

D

C

C

C

D

D

D

D

D

0.018μF (183)

B

D

D

B

B

D

D

D

C

C

C

D

D

D

D

D

0.022μF (223)

B

D

D

B

B

D

D

G

C

C

C

D

D

D

D

D

0.027μF (273)

D

B

B

D

D

G

C

C

C

D

D

D

D

D

0.033μF (333)

D

B

B

G

G

G

C

C

C

G

D

D

D

D

0.039μF (393)

D

B

B

G

G

C

C

C

G

D

D

D

D

0.047μF (473)

D

B

B

G

G

C

D

D

G

D

D

D

D

0.056μF (563)

B

B

G

G

C

D

D

G

D

D

D

K

0.068μF (683)

B

B

G

G

C

G

G

G

D

D

D

K

0.082μF (823)

D

D

G

G

C

G

G

D

D

D

K

0.10μF (104)

D

D

G

G

C

G

G

D

D

D

K

0.12μF (124)

D

D

C

G

G

D

D

D

0.15μF (154)

D

G

D

M

M

D

K

K

0.18μF (184)

D

G

D

M

M

D

K

K

0.22μF (224)

D

G

D

M

M

D

K

K

0.27μF (274)

D

G

D

K

K

0.33μF (334)

D

G

D

K

K

0.39μF (394)

D

M

D

K

K

0.47μF (474)

D

M

K

K

K

M

K

0.56μF (564)

100

200

250

500
630

0.68μF (684)

K

0.82μF (824)

K

1.0μF (105)

K

1. The letter in cell is expressed the symbol of product thickness.
2. For more information about products with special capacitance or other data, please contact WTC local representative.

27

Capacitor Arrays Capacitors
Y4C2/Y4C3 series
■ FEATURES
* High density mounting due to mounting space saving.
* Mounting cost saving.
* Increased throughput.

■ GENERAL ELECTRICAL DATA
Dielectric

NP0

Size
Capacitance*

X7R
4x0603

4x0402

4x0603

4x0603

10pF to 270pF

10pF to 470pF

1000pF to 100nF

180pF to 100nF

10nF to 100nF

Capacitance tolerance**

J (±5%), K (±10%)

Rated voltage (WVDC)

Y5V

4x0402

25,50V,100V

K (±10%), M (±20%)

25, 50V,100V

10V, 16V, 25V, 50V

≥10GΩ

Insulation resistance at Ur

16V, 50V

Ur=50V, ≤2.5%
Ur=25V&16V, ≤3.5%
Ur=10V, ≤5.0%

Cap<30pF: Q≥400+20C
Cap≥30pF: Q≥1000

Q/DF(Tan δ)*

Z (-20/+80%)

16V, 25V, 50V

Ur=50V, ≤5%
Ur=16V, ≤7%

≥10GΩ or RxC≥500ΩxF whichever is less

Operating temperature

-55 to +125°C

Capacitance characteristic

-25 to +85°C

±30ppm

±15%

Termination

+30/-80%

Ni/Sn (lead-free termination)

■ EXPLANATION OF PART NUMBERS
Y

4C

3

B

103

K

500

C

T

Series
Y=Capacitor array

Cap. Nr.
4C=4xCap

Termination pitch
3=0.03” pitch
2=0.02” pitch

Dielectric
B=X7R

Capacitance
103=10x103 =10nF

Tolerance
K=±10%

Rated voltage
500=50 VDC

Termination
C=Cu/Ni/Sn

Packaging
T=7” reeled

* Please refer to page 2 “How to order” for more information.

■ CAPACITANCE RANGE

Capacitance

SIZE

4 x 0402

DIELECTRIC

NP0

RATED VOLTAGE
(VDC)

25
50
100

4 x 0603
X7R

10

16

NP0
25

50

25
50
100

X7R
16

25

50

10pF (100)

T

B

15pF (150)

T

B

22pF (220)

T

B

33pF (330)

T

B

47pF (470)

T

B

68pF (680)

T

B

100pF (101)

T

B

150pF (151)

T

B

B

B

180pF (181)

T

B

B

B

220pF (221)

T

B

B

B

270pF (271)

T

B

B

B

330pF (331)

B

B

B

470pF (471)

B

B

B

B

B

6,80pF (681)

16

50

1,000pF (102)

T

T

T

T

B

B

1,500pF (152)

T

T

T

T

B

B

2,200pF (222)

T

T

T

T

B

B

3,300pF (332)

T

T

T

T

B

B

4,700pF (472)

T

T

T

T

B

B

6,800pF (682)

T

T

T

T

B

B

0.010μF (103)

T

T

T

T

B

B

B

0.015μF (153)

T

T

T

B

B

B

B

0.022μF (223)

T

T

T

B

B

B

B

0.033μF (333)

T

T

T

B

B

0.047μF (473)

T

T

T

B

B

0.068μF (683)

T

T

T

B

0.10μF (104)

T

T

T

B

1. The letter in cell is expressed the symbol of product thickness.
2. For more information about products with special capacitance or other data, please contact WTC local representative.

28

Y5V

B
B

B

Low Profile Capacitors
TT series
■ FEATURES
* Standard size with thin thickness.
* Small size with high capacitance.
* Capacitor with lead-free termination (pure Tin).

■ GENERAL ELECTRICAL DATA
Dielectric

X7R

X5R

Size

Y5V

0402, 0603, 0805, 1206, 1210
0.22μF to 4.7μF

Capacitance range
Capacitance tolerance

0.22μF to 22μF

1μF to 10μF

K (±10%), M (±20%)

Rated voltage (WVDC)

6.3V, 10V, 16V, 25V

Z (-20/+80%)

6.3V, 10V, 16V, 25V, 50V

10V, 16V, 25V, 50V
50V: ≤7%
25V: ≤9%
16V, 10V: ≤12.5%

16V, 10V: ≤10.0%
6.3V: ≤15.0%

DF(Tan δ)*

RxC≥100ΩxF

Insulation resistance at Ur
Operating temperature

-55 to +125°C

-55 to +85°C

Capacitance characteristic

-25 to +85°C

±15%

+30/-80%

Termination

Ni/Sn (lead-free termination)

■ EXPLANATION OF PART NUMBERS
TT

31

X

225

K

100

C

Series

Size (Inch (mm))

TT=Low profile

31=1206 (3216)

T

Dielectric

Capacitance

Tolerance

Rated voltage

Termination

Packaging

X=X5R

225=22x105 =2.2μF

K=±10%

100=10 VDC

C=Cu/Ni/Sn

T=7” reeled

* Please refer to page 2 “How to order” for more information.

■ CAPACITANCE RANGE
Dielectric

X5R

Size
Rated voltage (VDC)

0402
6.3

0603
25

10

16

L

H

H

H

H

0.22uF (224)
0.47uF (474)

L

1.0μF (105)

L

0805
6.3

Capacitance

16

25

T

T

T

T

T

T

T

6.3

L

T

T

3.3μF (335)
4.7μF (475)

10

1206
16

25

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

T

50

10

1210
16

25

L

1.5μF (155)
2.2μF (225)

10

L

H

T

T

T

10μF (106)

T

T

T

22μF (226)

T

T

T

T

6.8μF (685)
J

T

T

47μF (476)

T

T

Dielectric

X7R

Size

0805

Rated voltage (VDC)

T
T

10

Y5V

1206

16, 25

10

1.0μF (105)

25

1210
50

100

0805
10

16

1206
25

1210

10

16

25

50

T

T

T

T

T

T

T

T

T

50

10

T

Capacitance

1.5μF (155)
2.2μF (225)

T

T

3.3μF (335)
4.7μF (475)

K
T

T

T

T

6.8μF (685)
10μF (106)

T
T

T

T

T

22μF (226)

1. The letter in cell is expressed the symbol of product thickness.
2. For more information about products with special capacitance or other data, please contact WTC local representative.

29

Low Inductance Capacitors
0612 series
■ FEATURES
* Standard size with thin thickness.
* Small size with high capacitance.
* Capacitor with lead-free termination (pure Tin).
* MLCC with low ESL performance.

■ GENERAL ELECTRICAL DATA
Dielectric

X7R

Size

0612

Capacitance range

10nF to 150nF

Capacitance tolerance

K (±10%), M (±20%)

Rated voltage (WVDC)

50V

DF(Tan δ)*

≤2.5%

Insulation resistance at Ur

≥10GΩ or RxC≥500ΩxF whichever is less

Operating temperature

-55 to +125°C

Capacitance characteristic

±15%

Termination

Ni/Sn (lead-free termination)

ESL

500pH

■ EXPLANATION OF PART NUMBERS
0612

B

103

K

500

C

Size (Inch (mm))
0612 (1632)

Dielectric

Capacitance

Tolerance

Rated voltage

Termination

Packaging

B=X7R

103=10x103 =10nF

K=±10%

500=50VDC

C=Cu/Ni/Sn

T=7” reeled

* Please refer to page 2 “How to order” for more information.

■ CAPACITANCE RANGE
DIELECTRIC

X7R

SIZE

0612

Capacitance

RATED VOLTAGE (VDC)

50

10nF (103)

B

12nF (123)

B

15nF (153)

B

18nF (183)

B

22nF (223)

B

27nF (273)

B

33nF (333)

B

39nF (393)

B

47nF (473)

B

56nF (563)

B

68nF (683)

B

82nF (823)

B

100nF (104)

B

120nF (124)

B

150nF (154)

B

1. The letter in cell is expressed the symbol of product thickness.
2. For more information about products with special capacitance or other data, please contact WTC local representative.

30

T

Safety Certificated Capacitors X1/Y2
S2 series
■ FEATURES
* High voltage in a given case size.
* High stability and reliability.
* RoHS compliant.

■ GENERAL ELECTRICAL DATA
Dielectric
Size
Capacitance
Capacitance tolerance
Rated voltage (WVAC)

NP0

X7R

1808, 1812, 2211
4pF to 680pF

1808, 1812, 2220, 2211
100pF to 4700pF
J (±5%), K (±10%)
250Vrms

Cap<30pF: Q≥400+20C
Cap≥30pF: Q≥1000

Q/ DF(Tan δ)

DF≤2.5%
≥10GΩ
1500VAC
5000V
-55 to +125°C

Insulation resistance at Ur
Dielectric withstanding strength
Peak impulse voltage
Operating temperature
Capacitance characteristic
Termination
Certified number
Test standard

±30ppm

±15%
Ni/Sn (lead-free termination)
TUV: R50195920,UL: E250427, E182369
EN 60384-14, UL 60950:2000, UL 60384-14

■ EXPLANATION OF PART NUMBERS
S2

42

N

100

J

Series

Size (Inch (mm))

Dielectric

Capacitance

Tolerance

S2=X1/Y2

42=1808 (4520)

N=NP0

100=10x100 =10pF

J=±5%

302

L

Rated voltage

Termination

T

302=3000 VDC
602=6000 Impulse Voltage

L=Ag/Ni/Sn
C=Cu/Ni/Sn

Packaging
T=7” reeled

* Please refer to page 2 “How to order” for more information.

■ CAPACITANCE RANGE
DIELECTRIC

NP0

DIELECTRIC

X7R

SIZE

1808

1812

2211

SIZE

RATED VOLTAGE (VDC)

3000

3000

3000

RATED VOLTAGE (VDC)

3000

PEAK IMPULSE VOLTAGE

5000

5000

5000

6000

PEAK IMPULSE VOLTAGE

5000

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
K
K
K
K
K

K*
K*
K*
K*
K*
K*
K*
K*
K*
K*
K*
K*
K*
K*
K*
M
M
M
M
M
M
M
M
M
M

K
K
K
K
K
K
K
K
K
K
K
K
K
K
K

F*
F*
F*
F*
F*
F*
F*
F*
F*
G*
G*
G*
G*
G*
K
K
K

1812

2211

2220

56pF (560)
68pF (680)

Capacitance

Capacitance

4pF (4R0)
5pF (5R0)
10pF (100)
12pF (120)
15pF (150)
18pF (180)
22pF (220)
27pF (270)
33pF (330)
39pF (390)
47pF (470)
56pF (560)
68pF (680)
82pF (820)
100pF (101)
120pF (121)
150pF (151)
180pF (181)
220pF (221)
270pF (271)
330pF (331)
390pF (391)
470pF (471)
560pF (561)
680pF (681)

1808

82pF (820)
100pF (101)
120pF (121)
150pF (151)
180pF (181)
220pF (221)
270pF (271)
330pF (331)
390pF (391)
470pF (471)
560pF (561)
680pF (681)
820pF (821)
1,000pF (102)
1,200pF (122)
1,500pF (152)
1,800pF (182)
2,200pF (222)
3,300pF (332)
4,700pF (472)

G
G
G
G
G
K
K
K
K
K
K
K
K

G
G
G
G
G
G
G
G
K
K
M

G*
G*
G*
G*
G*
G*
K*
K*
K*
K*
M*
M
M
M
M

K
K
K
K
K
K
K
K
K
K
M
M
M
M
M
M

1. The letter in cell is expressed the symbol of product thickness.
2. The letter in cell with “*” mark is expressed product with Cu/Ni/Sn terminations.
3. For more information about products with special capacitance or other data, please contact WTC local representative.

■ PACKAGING DIMENSION AND QUANTITY (X1/Y2 & X2 Series)
Size Inch (mm)

L (mm)

W (mm)

MB min(mm)

1808 (4520)

4.50+0.5/-0.3

2.03±0.25

0.26

1812 (4532)

4.50+0.5/-0.3

3.20±0.30

0.26

2220 (5750)

5.70±0.40

5.00±0.40

0.30

2211 (5728)

5.70±0.40

2.80±0.30

0.30

Unit: pieces
7” Plastic tape

T (mm)/Symbol
1.40±0.15
1.60±0.20
2.00±0.20
1.60±0.20
2.00±0.20
2.50±0.30
2.00±0.20
2.50±0.30
1.60±0.20
2.00±0.20
2.50±0.30

F
G
K
G
K
M
K
M
G
K
M

2,000
1,000
1,000
1,000
1,000
500
1,000
500
1,000
1,000
500
31

Safety Certificated Capacitors X2
S3 series
■ FEATURES
* High voltage in a given case size.
* High stability and reliability.
* RoHS compliant.

■ GENERAL ELECTRICAL DATA
Dielectric

NP0

Size
Capacitance*
Capacitance tolerance
Rated voltage (WVDC)
Rated voltage (WVAC)

X7R
1808, 1812

3.9pF to 1000pF
J (±5%), K (±10%)

150pF to 5600pF
K (±10%), M (±20%)
2000V, 3000V
250Vrms

Cap<30pF: Q≥400+20C
Cap≥30pF: Q≥1000

Q/ DF(Tan δ)

Tan δ≤2.5%
≥10GΩ
1500VAC
2500V
-55 to +125°C

Insulation resistance at Ur
Dielectric withstanding strength
Peak impulse voltage (X2)
Operating temperature
Capacitance characteristic
Termination
Certified number
Test standard

±30ppm

±15%
Ni/Sn (lead-free termination)
TUV: R50195920,UL: E250427, E182369
EN 60384-14, UL 60950:2000, UL 60384-14

■ EXPLANATION OF PART NUMBERS
S3

42

N

100

J

Series

Size (Inch (mm))

S3=X2

42=1808 (4520)

202

L

Dielectric

Capacitance

N=NP0

100=10x100 =10pF

T

Tolerance

Rated voltage

Termination

Packaging

J=±5%

202=2000 VDC

L=Ag/Ni/Sn

T=7” reeled

* Please refer to page 2 “ How to order” for more information.

■ CAPACITANCE RANGE

Capacitance

RATED VOLTAGE
(VDC)
3.9pF (3R9)
4.7pF (4R7)
5.0pF (5R0)
5.6pF (5R6)
6.8pF (6R8)
8.2pF (8R2)
10pF (100)
12pF (120)
15pF (150)
18pF (180)
22pF (220)
27pF (270)
33pF (330)
39pF (390)
47pF (470)
56pF (560)
68pF (680)
82pF (820)
100pF (101)
120pF (121)
150pF (151)
180pF (181)
220pF (221)
270pF (271)
330pF (331)
390pF (391)
470pF (471)
560pF (561)
680pF (681)
820pF (821)
1,000pF (102)

DIELECTRIC

NP0

SIZE

1808
2000

3000

F*
F*
F*
F*
F*
F*
F*
F*
F*
F*
F*
F*
F*
G*
G*
G*
G*
G*
K*
K*
K*
K*
K*
K*
K*
K*
K*
K*
K*
K*
K*

F*
F*
F*
F*
F*
F*
F*
F*
F*
F*
F*
F*
F*
G*
G*
G*
G*
G*
K*
K*
K*
K*
K*
K*
K*
K*
K*
K*
K*
K*
K*

3000

D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
K
K
K

RATED VOLTAGE
(VDC)
150pF (151)
180pF (181)
220pF (221)
270pF (271)
330pF (331)
390pF (391)
470pF (471)
560pF (561)
680pF (681)
820pF (821)
1,000pF (102)
1,200pF (122)
1,500pF (152)
1,800pF (182)
2,200pF (222)
2,700pF (272)
3,300pF (332)
3,900pF (392)
4,700pF (472)
5,600pF (562)

1. The letter in cell is expressed the symbol of product thickness.
2. For more information about products with special capacitance or other data, please contact WTC local representative.

32

X7R

SIZE

1812

Capacitance

DIELECTRIC

1808

1812

2000

3000

G
G*
G*
G*
G*
G*
G*
G*
G*
G*
K*
K*
K*
K*
K

G*
G*
G*
G*
G*
G*
G*
G*
G*
K*
K*
K*
K*

2000

G
G*
G*
G*
G*
G*
G*
G*
G*
K*
K*
M
M
M
M
M
M

3000

G*
G*
G*
G*
G*
G*
G*
G*
K*
K*
M
M

Automotive Capacitor Qualified to AEC-Q200
MT series
■ GENERAL ELECTRICAL DATA
Dielectric

NP0

Size
Capacitance range
Capacitance tolerance
Rated voltage (WVDC)
Operating temperature
Capacitance characteristic
Termination

X7R
0201, 0402, 0603, 0805, 1206, 1210

0.5pF to 0.33uF
100pF to 1μF
Cap≤5pF:B,C; 5pF1μF;1210≧2.2μF;TT series

≦10%

0805＞0.22µF;1210≧3.3μF

≦3%

0201(50V); 0603≧0.047μF; 0805≧0.18μF;1206≧0.47μF

≦5%

0201≧0.01uF; 1210≧4.7μF

≦10%

0402≧0.012μF;0603>0.1μF; 0805≧1μF;1206≧2.2μF;
1210≧10μF; TT series

≦10%

0603≧1μF;0805≥2.2µF;1206≧2.2μF;1210≧10μF

≦5%

0201≧0.01μF;0805≧1μF; 1210≧10μF

≦7%

0603≧0.33μF; 1206≧4.7μF

≦10%

0201≧0.1μF;0402≧0.10μF&(0402/X7R≧0.056μF); TT series
0603≧0.47μF; 0805≧2.2μF;1206≧6.8μF; 1210≧22μF

≦12.5%

0402≧0.47μF

≦5%
16V

≦3.5%
≦10%

10V

≦5%

6.3V

≦10%

4V

≦15%

≦10%

0201≧0.01μF;0402≧0.033μF;0603≧0.15μF;
0805≧0.68μF;1206≧2.2μF;1210≧4.7μF
0201≧0.1uF(0201/X7R≧0.022μF); 0402≧ 0.22uF;
0603≧0.68μF;0805≧2.2μF;1206≧4.7μF; 1210≧22μF; TT series
0201≧0.012μF;0402≧0.33μF(0402/X7R≧0.22μF); TT series
0603≧0.33μF; 0805≧2.2μF;1206≧2.2μF;1210≧22μF:01R5

≦15%

0201≧0.1μF; 0402≧1μF

≦15%

0201≧0.1μF;0402≧1μF;0603≧10μF; 0805≧4.7μF;
1206≧47μF :1210≧100μF; TT series

≦20%

0402≧2.2μF

---

---

Y5V:
Rated vol. D.F. ≦

Exception of D.F.≦
≦7%
0603≧0.1μF; 0805≧0.47μF; 1206≧4.7μF; TT series & Cap≧1μF
≧50V
≦5%
≦12.5%
1210≧6.8μF
35V
≦7%
----≦7%
0402≧0.047μF;0603≧0.1μF; 0805≧0.33μF;1206≧1μF; 1210≧4.7μF
25V
≦5%
0402≧0.068μF;0603≧0.47μF; 1206≧4.7μF; 1210≧22μF;
≦9%
TT series & Cap≧1μF
≦9%
0402≧0.068μF; 0603≧0.68μF
16V
≦7%
(C<1.0μF)
≦12.5%
0402≧0.22μF
16V
0603≧2.2μF; 0805≧3.3μF;1206≧10μF; 1210≧22μF;
≦9%
≦12.5%
(C≧1.0μF)
1812≧47μF; TT series & Cap≧1μF
10V
≦12.5% ≦20%
0402≧0.47μF
6.3V
≦20%
-----

4a. Dielectric Strength

*To apply voltage:
≦100V : 250% of rated voltage.
200V ~ 300V : 200% of rated voltage.
400V ~ 450V : 120% of rated voltage.
500V ~ 999V : 150% of rated voltage.
1000V ~ 3000V : 120% of rated voltage.
4000V : 110% of rated voltage.
*Duration: 1 to 5 sec.
*Charge & discharge current less than 50mA.

* No evidence of damage or flash over during test.

4b. Dielectric Strength

* To apply 1500 VAC voltage.
* Duration: 60 sec.

* No evidence of damage or flash over during test.

To apply rated voltage for max. 120 sec.

10GΩ or RxC≧500Ω-F whichever is smaller.

*Before initial measurement (Class II only):
To apply de-aging at 150°C for 1hr then set for
24±2 hrs at room temp.

Class II (X7R, X6S, X5R, X7S,Y5V)

Rated Voltage:
200V ~ 630V

To apply rated voltage (500V
max.) for 60 sec.

>10GΩ or 100Ω-F whichever is smaller.

Rated Voltage:
>630V

To apply 500V for 60sec.

>10GΩ or 100Ω-F whichever is smaller.

(for X1/Y2 & X2)

5.

Insulation Resistance

Rated voltage

* This Reliability Test Conditions and Requirements only for General Purpose series, please refer to individual sheet for other products information.
38

Insulation Resistance

100V: X7R
50V: :0402>0.01µF;0603≥1µF;0805≥1µF; 1206≧4.7μF;1210≥4.7µF
35V:0805≥2.2µF; 1206≧2.2μF;1210≧10μF
10GΩ or RxC≧100 Ω-F
25V:0402≥1µF;0603≥2.2µF;0805≥2.2µF;1206≥10µF;1210≥10µF
whichever is smaller.
16V:0201≧0.1μF;0402≥0.22µF;0603≥1µF;0805≥2.2µF;1206≥10µF;1210≥47µF
10V:0201≥47nF;0402≥0.47µF;0603≥0.47µF;0805≥2.2µF;1206≥4.7µF;1210≥47µF
6.3V ; 4V ; TT series; Size≥1812
All X6S items , All X7S items
100V: 1210≥3.3µF, 50V: 0402≥0.1µF; 0603≥2.2μF; 0805≥10µF;1206≥10µF / 35V:
0603≥1µF / 25V: 0201≥0.1µF; 0402≥0.22µF;0603≥10μF; 0805≥10µF;1206≥22µF /
RxC≧50 Ω-F
16V: 0603≥10µF; 0402≥1µF; 0201≥0.22µF / 10V: 0201>0.1µF, 0402≥1µF; 0603≥10µF;
0805≥47µF; TT21>4.7µF / 6.3V: 0201≥0.1µF; 0603>4.7μF; 0805≥47µF;1206≥10µF;
TT15>1.0µF / 4V:0603≥22µF; 0805≥47µF; 1206≥100µF

Appendix I
Reliability Test Conditions and Requirements
No.
6.

Item

Test Condition

Requirements

Temperature Coefficient With no electrical load.
T.C.
NPO (C0G)
NPO (C0H)
NPO (C0J)
X8G
X8R
X7R
X7S
X6S
X5R
Y5V

Operating Temp
-55~125°C at 25°C
-55~125°C at 25°C
-55~125°C at 25°C
-55~125°C at 25°C
-55~125°C at 25°C
-55~125°C at 25°C
-55~125°C at 25°C
-55~105°C at 25°C
-55~ 85°C at 25°C
-25~ 85°C at 20°C

T.C.
NPO (C0G)
NPO (C0H)
NPO (C0J)
X8G
X8R
X7R
X7S
X6S
X5R
Y5V

Capacitance Change
Within ±30ppm/°C
Within ±60ppm/°C
Within ±120ppm/°C
Within ±30ppm/°C
Within ±15%
Within ±15%
Within ±22%
Within ±22%
Within ±15%
Within +30%/-80%

*Measurement voltage for Class II:
01005
Cap≤0.01µF: 0.5V
Cap>0.01µF: 0.2V

0201
Cap<0.1µF:1V
0.1µF≤Cap<1µF: 0.2V
Cap≥1µF: 0.1V
0603
Cap≤1µF: 1V
1µF4.7µF: 0.2V

0402
Cap<1µF: 1V
Cap=1µF: 0.5V
1µF10µF: 0.2V

1206/1210
Cap≤10µF: 1V
10µF100µF: 0.2V

*Before initial measurement (Class II only):
To apply de-aging at 150°C for 1hr then set for 24±2 hrs at room temp.

7.

Adhesive Strength of
Termination

*Pressurizing force:
01005:1N, 0201:2N, 0402 & 0603:5N,
>0603: 10N
*Test time：10 ±1 sec

* No remarkable damage or removal of the terminations.

8.

Vibration Resistance

*Vibration frequency: 10~55 Hz/min.
*Total amplitude: 1.5mm
*Test time: 6 hrs.(Two hrs each in three mutually perpendicular directions.)
*Before initial measurement (Class II only):
To apply de-aging at 150°C for 1hr then set for 24±2 hrs at room temp.
*Cap./DF(Q) Measurement to be made after de-aging at 150°C for 1hr then
set for 24±2 hrs at room temp.

* No remarkable damage.
* Cap change and Q/D.F.: To meet initial spec.

9.

Solderability

* Solder temperature: 235±5°C
* Dipping time: 2±0.5 sec.

95% MIN. coverage of all metalized area.**
**SH series: 75% MIN. coverage of all metalized area.

*The middle part of substrate shall be pressurized by means of the
pressurizing rod at a rate of about 1 mm per second until the deflection
becomes 1 mm / SH series: 5 mm#3 and then the pressure shall be
maintained for 5±1 sec.

* No remarkable damage.
* Cap change:

* Before initial measurement (Class II only):
To apply de-aging at 150°C for 1hr then set for 24±2 hrs at room temp.

Y5V: within ±30%
(This capacitance change means the change of capacitance under specified flexure of
substrate from the capacitance measured before the test.)

10. Bending Test

NP0,X8G: within ±5% or 0.5pF whichever is larger
X7R, X7S, X6S, X5R,X8R: within ±12.5% ,

#3.SH21B224_101/SH31B226_100/SH31B106_160/SH31B106_250/SH31
B225_500/SH31B474_101/SH31B105_101/SH32B476_6R3/SH32B226_16
0/SH32B106_250/SH32B225_500/SH32B475_500/SH32B106_500/SH32B
225_101/SH21B105_500/SH21B225_250/SH21B475_160

11.

* No remarkable damage.
* Cap change:

Resistance to Soldering * Solder temperature: 260±5°C
* Dipping time: 10±1 sec
Heat
* Preheating: 120 to 150°C for 1 minute before immerse the capacitor in a
eutectic solder.
* Before initial measurement (Class II only):
To apply de-aging at 150°C for 1hr then set for 24±2 hrs at room temp.
* Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150°C for 1hr
then set for 24±2 hrs at room temp.

12. Temperature Cycle

* Conduct the five cycles according to the temperatures and time.
Step

Temp. (°C)

Time (min.)

1

MIN. Operating Temp. +0/-3

2

Room Temp.

30±3
2~3

3

MAX. Operating Temp. +3/-0

30±3

4

Room Temp.

2~3

NP0,X8G: within ±2.5% or 0.25pF whichever is larger
X7R, X7S, X6S, X5R,X8R: within ±7.5%
Y5V: within ±20%
* Q/D.F., I.R. and dielectric strength: To meet initial requirements.
* 25% max. leaching on each edge.

* No remarkable damage.
* Cap change:
NP0,X8G: within ±2.5% or 0.25pF whichever is larger
X7R, X7S, X6S, X5R,X8R: within ±7.5%
Y5V: within ±20%
* Q/D.F., I.R. and dielectric strength: To meet initial requirements.

* Before initial measurement (Class II only):
To apply de-aging at 150°C for 1hr then set for 24±2 hrs at room temp.
* Cap. / DF(Q) / I.R. Measurement to be made after de-aging at 150°C for 1hr
then set for 24±2 hrs at room temp.

* This Reliability Test Conditions and Requirements only for General Purpose series, please refer to individual sheet for other products information.

39

Appendix I
Reliability Test Conditions and Requirements
No.

Item

13. Humidity
(Damp Heat)
Steady State

Test Condition

Requirements

* Test temp.: 40±2°C

* No remarkable damage.

* Humidity: 90~95%RH

* Cap change: NP0, X8G: within ±5% or 0.5pF whichever is larger

* Test time: 500+24/-0hrs.

X7R, X7S, X6S, X5R, X8R: ≥10V**,within ±12.5%;6.3V within ±25%;TT series,within ±25%

* Before initial measurement (Class II only):
To apply de-aging at 150°C for 1hr then set for 24±2 hrs at
room temp.
* Cap. / DF(Q) / I.R. Measurement to be made after de-aging at
150°C for 1hr then set for 24±2 hrs at room temp.

**10V:0603≧4.7μF;0402≧1μF;0201≧0.1μF, within ±25%;
Y5V: ≥10V, within ±30%; 6.3V, within +30/-40%
* Q/D.F. value:
NP0, X8R: More than 30pF Q≥350, 10pF≤C≤30pF, Q≥275+2.5C,Less than 10pF Q≥200+10C
X8R: ≤7.5%
X7R, X6S, X5R, X7S:
Rated vol.

D.F.≦

≧100V

≦3%

≧50V

≦3%

35V

≦5%

25V

≦5%

16V

≦5%

10V

≦7.5%

6.3V

≦15%

4V

≦20%

Exception of D.F.≦
≦6%
1206≧0.47μF
≦7.5% 0805＞0.1µF, 0603≧0.068μF, 1206>1μF;1210≧2.2μF;TT series
≦20%
0805＞0.22µF;1210≧3.3μF
≦6%
0201(50V);0603≧0.047μF; 0805≧0.18μF; 1206≧0.47μF
≦10%
0201≧0.01uF;1210≧4.7μF
0402≧0.012μF; 0603>0.1μF; 0805≧1μF; 1206≧2.2μF;
≦20%
1210≧10μF; TT series
≦20%
0603≧1μF;0805≥2.2µF;1206≧2.2μF;1210≧10μF
≦10%
0201≧0.01μF;0805≧1μF; 1210≧10μF
≦14%
0603≧0.33μF;1206≧4.7μF
0201≧0.1μF;0402≧0.10μF&(0402/X7R≧0.056μF); TT series
≦15%
0603≧0.47μF;0805≧2.2μF;1206≧6.8μF;1210≧22μF
≦20%
0402≧0.47μF
≦10%
0603≧0.15μF;0805≧0.68μF;1206≧2.2μF;1210≧4.7μF
0201≧0.01μF(0201/X7R≧0.022μF);0402≧0.033μF;
≦15%
0603≧0.68μF;0805≧2.2μF;1206≧4.7μF; 1210≧22μF; TT series
0201≧0.012μF; 0402≧0.33μF(0402/X7R≧0.22μF);
≦15%
0603≧0.33μF;0805≧2.2μF;1206≧2.2μF; 1210≧22μF
≦20%
0201≧0.1μF ;0402≧1μF; TT series; 01R5
0201≧0.1μF;0402≧1μF;0603≧10μF;
≦30%
0805≧4.7μF;1206≧47μF;1210≧100μF;TT series
-----

Y5V:
Rated vol.

D.F.≦

≧50V

≦7.5%

35V

≦10%

Exception of D.F.≦
0603≧0.1μF; 0805≧0.47μF;1206≧4.7μF;
≦10%
TT series & Cap≧1μF
1210≧6.8μF
≦20%
---

--0402≧0.047μF;0603≧0.1μF;0805≧0.33μF;
1206≧1μF; 1210≧4.7μF
0402≧0.068μF;0603≧0.47μF;1206≧4.7μF;
≦15%
1210≧22μF; TT series & Cap≧1μF
≦12.5% 0402≧0.068μF; 0603≧0.68μF
≦20%
0402≧0.22μF
≦10%

25V

≦7.5%

16V
(C<1.0μF)

≦10%

16V
0603≧2.2μF;0805≧3.3μF;1206≧10μF;1210≧22μF;
≦12.5%
≦20%
1812≧47μF; TT series & Cap≧1μF
(C≧1.0μF)
10V
≦20%
≦30%
0402≧0.47μF
6.3V
≦30%
----* I.R.: ≥10V, 1GΩ or 50 Ω-F whichever is smaller.
Class II (X7R, X7E, X6S, X5R,X7S, Y5V)
Rated voltage
100V: All X7R;1210≥3.3µF
50V: 0402>0.01µF;0603≥1µF;0805≥1µF;1206≥4.7µF;1210≥4.7µF
35V:0603≥1µF;0805≥2.2µF; 1206≧2.2μF;1210≧10μF
25V:0201≧0.1uF; 0402≥0.22µF; 0603≥2.2µF;0805≥2.2µF; 1206≥10µF;1210≥10µF
16V: 0201≧0.1uF;0402≥0.22µF;0603≥1µF;0805≥2.2µF;
1206≥10µF;1210≥47µF
10V:0201≥47nF;0402≥0.47µF;0603≥0.47µF;0805≥2.2µF;
1206≥4.7µF;1210≥47µF
6.3V ; 4V ; TT series ; All X6S/X7S items; Size≥1812

* This Reliability Test Conditions and Requirements only for General Purpose series, please refer to individual sheet for other products information.

40

Insulation
Resistance

1GΩ or RxC≧
10 Ω-F
whichever is
smaller.

Appendix I
Reliability Test Conditions and Requirements
No.
14

Item

Test Condition

Humidity

*Test temp.：40±2°C

(Damp Heat)

*Humidity：90~95%RH

Load

*Test time：500+24/-0 hrs.
*To apply voltage：rated voltage (MAX. 500V)
*Before initial measurement (Class II only): To apply de-aging at
150°C for 1hr then set for 24±2 hrs at room temp.
* Cap. / DF(Q) / I.R. Measurement to be made after de-aging at
150°C for 1hr then set for 24±2 hrs at room temp.

Requirements
* No remarkable damage.
Cap change: NP0,X8G: ±7.5% or 0.75pF whichever is larger.
X7R, X7S, X6S, X5R,X8R: ≥10V**,within ±12.5%;6.3V within ±25%;TT series,within ±25%
**10V:0603≧4.7μF;0402≧1μF;0201≧0.1μF, within ±25%;
Y5V: ≥10V, within ±30%; 6.3V, within +30/-40%
Q/D.F. value: NP0,X8G: C≥30pF,Q≥200;C<30pF, Q≥100+10/3C
X8R: ≤7.5%
X7R, X6S, X5R, X7S:
Rated vol.

D.F.≦

≧100V

≦3%

≧50V

35V

25V

≦3%

≦5%

≦5%

Exception of D.F.≦
≦6%

1206≧0.47μF

≦7.5%

0805＞0.1µF, 0603≧0.068μF, 1206>1μF;1210≧2.2μF;TT series

≦20%

0805＞0.22µF;1210≧3.3μF

≦6%

0201(50V);0603≧0.047μF; 0805≧0.18μF; 1206≧0.47μF

≦10%

0201≧0.01uF;1210≧4.7μF

≦20%

0402≧0.012μF; 0603>0.1μF; 0805≧1μF; 1206≧2.2μF;
1210≧10μF; TT series

≦20%

0603≧1μF;0805≥2.2µF;1206≧2.2μF;1210≧10μF

≦10%

0201≧0.01μF;0805≧1μF; 1210≧10μF

≦14%

0603≧0.33μF;1206≧4.7μF

≦15%

0201≧0.1μF;0402≧0.10μF&(0402/X7R≧0.056μF); TT series
0603≧0.47μF;0805≧2.2μF; 1206≧6.8μF;1210≧22μF

≦20%

0402≧0.47μF

≦10%

0603≧0.15μF;0805≧0.68μF;1206≧2.2μF;1210≧4.7μF

≦15%

0201≧0.01μF(0201/X7R≧0.022μF);0402≧0.033μF;
0603≧0.68μF;0805≧2.2μF;1206≧4.7μF; 1210≧22μF; TT series

≦15%

0201≧0.012μF; 0402≧0.33μF(0402/X7R≧0.22μF);
0603≧0.33μF;0805≧2.2μF;1206≧2.2μF; 1210≧22μF

16V

≦5%

10V

≦7.5%

≦20%

0201≧0.1μF ;0402≧1μF; TT series; 01R5

6.3V

≦15%

≦30%

0201≧0.1μF;0402≧1μF;0603≧10μF;
0805≧4.7μF;1206≧47μF;1210≧100μF;TT series

4V

≦20%

---

---

Y5V:
Rated vol.

D.F.≦

≧50V

≦7.5%

35V

≦10%

Exception of D.F.≦
0603≧0.1μF; 0805≧0.47μF;1206≧4.7μF;
≦10%
TT series & Cap≧1μF
≦20%

1210≧6.8μF

---

---

≦10%
25V

≦7.5%
≦15%

0402≧0.047μF;0603≧0.1μF;0805≧0.33μF;1206≧1μF;
1210≧4.7μF
0402≧0.068μF;0603≧0.47μF;1206≧4.7μF; 1210≧22μF;
TT series & Cap≧1μF

≦12.5%

0402≧0.068μF; 0603≧0.68μF

≦20%

0402≧0.22μF

≦12.5%

≦20%

0603≧2.2μF;0805≧3.3μF;1206≧10μF;1210≧22μF;
1812≧47μF; TT series & Cap≧1μF

10V

≦20%

≦30%

0402≧0.47μF

6.3V

≦30%

---

---

16V
(C<1.0μF)

≦10%

16V
(C≧1.0μF)

*I.R.: ≥10V, 500MΩ or 25 Ω-F whichever is smaller.
Class II (X7R, X7S, X6S, X5R, Y5V)
Rated voltage

Insulation Resistance

100V: All X7R;1210≥3.3µF
50V: 0402>0.01µF;0603≥1µF;0805≥1µF;1206≥4.7µF;1210≥4.7µF
35V:0603≥1µF;0805≥2.2µF; 1206≧2.2μF;1210≧10μF
25V:0201≧0.1uF; 0402≥0.22µF; 0603≥2.2µF;0805≥2.2µF;
1206≥10µF;1210≥10µF
16V: 0201≧0.1uF;0402≥0.22µF;0603≥1µF;0805≥2.2µF;
1206≥10µF;1210≥47µF

500MΩ or RxC≧5 Ω-F
whichever is smaller.

10V:0201≥47nF;0402≥0.47µF;0603≥0.47µF;0805≥2.2µF;
1206≥4.7µF;1210≥47µF
6.3V ; 4V ; TT series ; All X6S/X7S items; Size≥1812

* This Reliability Test Conditions and Requirements only for General Purpose series, please refer to individual sheet for other products information.

41

Appendix I
Reliability Test Conditions and Requirements
No.

Item

15. High
Temperature
Load
(Endurance)

Test Condition

Requirements

*Test temp.：
X8G, X8R: 150±3°C
NP0, X7R/ X7S: 125±3°C
X6S: 105±3°C
X5R, Y5V: 85±3°C
*Test time: 1000+24/-0 hrs.

* No remarkable damage.
Cap change: NP0, X8G: ±3.0% or ±0.3pF whichever is larger
X7R, X7S, X6S, X5R, X8R: ≥10V**,within ±12.5%;6.3V within ±25%;TT series,within ±25%
**10V:0603≧4.7μF;0402≧1μF;0201≧0.1μF, within ±25%;
Y5V: ≥10V, within ±30%; 6.3V, within +30/-40%
Q/D.F. value: NP0,X8G: More than 30pF, Q≥350; 10pF≤C<30pF, Q≥275+2.5C; Less than 10pF, Q≥200+10C

*To apply voltage:
(1) 100% of rated voltage for below range.

X7R, X6S, X5R, X7S:

Size

Dielectric

0201

X5R/X7R/X6S

0402

0603

0805

1206
1210

X8R: ≤7.5%

Rated voltage

Capacitance

≦10V

C≧0.1µF
0805＞0.1µF, 0603≧0.068μF, 1206>1μF;1210≧2.2μF;TT series

≦20%

0805＞0.22µF;1210≧3.3μF

≦6%

0201(50V);0603≧0.047μF; 0805≧0.18μF; 1206≧0.47μF

≦10%

0201≧0.01uF;1210≧4.7μF

≦20%

0402≧0.012μF; 0603>0.1μF; 0805≧1μF; 1206≧2.2μF;
1210≧10μF; TT series

≦20%

0603≧1μF;0805≥2.2µF;1206≧2.2μF;1210≧10μF

≦10%

0201≧0.01μF;0805≧1μF; 1210≧10μF

≦14%

0603≧0.33μF;1206≧4.7μF

C≧3.3µF

≦15%

0201≧0.1μF;0402≧0.10μF&(0402/X7R≧0.056μF); TT series
;0603≧0.47μF;0805≧2.2μF;1206≧6.8μF;1210≧22μF

≦20%

0402≧0.47μF

≦10%

0603≧0.15μF;0805≧0.68μF;1206≧2.2μF;1210≧4.7μF

6.3V,10V,
16V, 25V

C≧1.0µF

4V

C≧22µF

X5R/X7R/
X6S/X7S

6.3V,10V

C≧4.7µF

25V,35V

C≧1.0µF

4V

C≧47µF

6.3V

C≧22µF

10V~50V

C≧10µF

X5R/X7R/X6S

≦6.3V

C≧47µF

NP0

3000V

C≧1.5pF

X5R/X7R/X6S

16V

C≧47µF

TT15

X5R

6.3V

C >1.0µF

TT18

Y5V

6.3V,10V

C≧2.2µF

TT21
TT31

≦3%

1206≧0.47μF

X5R/X7R/
X6S/X7S/Y5V

100V

≧100V

Y5V

6.3V

C≧10µF

X5R/X7R/X6S

≦10V

C≧10µF

Y5V

6.3V

C≧22µF

≧50V

35V

25V

16V

≦3%

≦5%

≦5%

≦5%
≦15%

**1WV items must follow de-rating conditions

≦15%
10V

(2)150% of rated voltage for below range.
Size
0201

0402

0603

0805

Dielectric

Rated voltage

Capacitance

X5R/X6S

16V/25V

C=0.1µF

X7R

16V

C≧0.022µF

50V

C≧0.1µF

X5R/X7R/X6S

10~25V

C≧0.22µF

Y5V

16V

C≧0.47µF

X7R

50V

C>0.1µF

X5R/X7R/
X6S/X7S

10V,16V, 50V

C≧1.0µF

Y5V

16V

C≧2.2µF

X5R/X7R/
X6S/X7S

10~50V

C≧4.7µF

X5R/X7R/X7S

Exception of D.F.≦

≦7.5%

C>0.1µF

X7R

D.F.≦

≦6%
≧16V

X5R/X7R/
X6S/X7S

Rated vol.

50V

C≧2.2µF

100V

C≧0.47µF

Y5V

16V

C≧4.7µF

1206

X5R/X7R/X6S

100V

C>1.0µF

1210

X5R/X7R/X6S

50V~100V

C≧2.2µF

1825
2220
2225

X7R

100V~250V

C≧1.0µF

(3) ≦6.3V or C≧10μF or TT series:150% of rated voltage.
(4) 10V~250V: 200% of rated voltage.
(5) 400V~450V: 120% of rated voltage.
(6) 500V: 150% of rated voltage.
(7) 630~3000V: 120% of rated voltage.
(8) Ur=4000V: 110% of rated voltage.
*Before initial measurement (Class II only): To apply de-aging at
150°C for 1hr then set for 24±2 hrs at room temp.

≦7.5%

0201≧0.01μF(0201/X7R≧0.022μF);0402≧0.033μF;
0603≧0.68μF;0805≧2.2μF;1206≧4.7μF; 1210≧22μF; TT series
0201≧0.012μF; 0402≧0.33μF(0402/X7R≧0.22μF);
0603≧0.33μF;0805≧2.2μF;1206≧2.2μF; 1210≧22μF

≦20%

0201≧0.1μF ;0402≧1μF; TT series; 01R5

6.3V

≦15%

≦30%

0201≧0.1μF;0402≧1μF;0603≧10μF;
0805≧4.7μF;1206≧47μF;1210≧100μF;TT series

4V

≦20%

---

---

Rated vol.

D.F.≦

Exception of D.F.≦

≧50V

≦7.5%

Y5V:

35V

≦10%

25V

≦7.5%

≦10%

0603≧0.1μF; 0805≧0.47μF;1206≧4.7μF; TT series

≦20%

1210≧6.8μF

---

---

≦10%
≦15%

0402≧0.047μF;0603≧0.1μF;0805≧0.33μF;
1206≧1μF; 1210≧4.7μF
0402≧0.068μF;0603≧0.47μF;1206≧4.7μF;
1210≧22μF; TT series

≦12.5% 0402≧0.068μF; 0603≧0.68μF

16V
(C<1.0μF)

≦10%

16V
(C≧1.0μF)

≦12.5% ≦20%

0603≧2.2μF;0805≧3.3μF;1206≧10μF;1210≧22μF;
1812≧47μF; TT series

10V

≦20%

≦30%

0402≧0.47μF

6.3V

≦30%

---

---

≦20%

0402≧0.22μF

*I.R.: ≥10V, 1GΩ or 50 Ω-F whichever is smaller.
Class II (X7R, X7S, X6S, X5R, Y5V)
Rated voltage

Insulation Resistance

100V: All X7R;1210≥3.3µF
* Cap. / DF(Q) / I.R. Measurement to be made after de-aging at
150°C for 1hr then set for 24±2 hrs at room temp.

50V: 0402>0.01µF;0603≥1µF;0805≥1µF;1206≥4.7µF;1210≥4.7µF
35V:0603≥1µF;0805≥2.2µF; 1206≧2.2μF;1210≧10μF
25V:0201≧0.1uF; 0402≥0.22µF; 0603≥2.2µF;0805≥2.2µF;
1206≥10µF;1210≥10µF
16V: 0201≧0.1uF;0402≥0.22µF;0603≥1µF;0805≥2.2µF;
1206≥10µF;1210≥47µF
10V:0201≥47nF;0402≥0.47µF;0603≥0.47µF;0805≥2.2µF;
1206≥4.7µF;1210≥47µF
6.3V ; 4V ; TT series ; All X6S/X7S items; Size≥1812

16. ESR

For RF Series only, refer to data sheet.

----

* This Reliability Test Conditions and Requirements only for General Purpose series, please refer to individual sheet for other products information.

42

1GΩ or RxC≧10 Ω-F
whichever is smaller.

Appendix II
General Information
■ Constructions
No.

Name



Ceramic material



Inner electrode




NP0

Inner layer
Termination



NPO/X7R/X7S/X6S/X5R/Y5V
BaTiO3 based

AgPd alloy

Ni

Ag

Cu

Middle layer

Ni

Outer layer

Sn

Fig. 1 The construction of MLCC

■ Storage and handling conditions
(1)

To store products at 5 to 40C ambient temperature and 20 to 70%. related humidity conditions.

(2)

The product is recommended to be used within one year after shipment. Check solderability in case of shelf life extension is needed.

Cautions:
a. The corrosive gas reacts on the terminal electrodes of capacitors, and results in the poor solderability.

Do not store the capacitors in the ambience of corrosive gas

(e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas etc.)
b. In corrosive atmosphere, solderability might be degraded, and silver migration might occur to cause low reliability.
c. Due to the dewing by rapid humidity change, or the photochemical change of the terminal electrode by direct sunlight,the solderability and electrical performance may
deteriorate. Do not store capacitors under direct sunlight or dewing condition. To store products on the shelf and avoid exposure to moisture.

■ Recommended soldering conditions
The lead-free termination MLCCs are not only to be used on SMT against lead-free solder paste, but also suitable against lead-containing solder paste. If the optimized
solder joint is requested, increasing soldering time, temperature and concentration of N2 within oven are recommended.

4℃/ sec max

Over 60sec at least by
natural cooling

Fig. 2 Recommended reflow soldering profile for SMT process
with SnAgCu series solder paste.

Fig. 3 Recommended wave soldering profile for SMT process
with SnAgCu series solder.

43



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : ericchu
Create Date                     : 2017:07:06 16:57:53+08:00
Modify Date                     : 2017:08:01 09:26:14+08:00
Language                        : zh-TW
Tagged PDF                      : No
XMP Toolkit                     : XMP Core 5.5.0
Creator Tool                    : Microsoft® Word 2010
Metadata Date                   : 2017:07:06 17:00:18+08:00
Format                          : application/pdf
Creator                         : ericchu
Title                           : Table of contents
Producer                        : Microsoft® Word 2010
Document ID                     : uuid:99278015-a519-46d4-978f-301f37bc86ed
Instance ID                     : uuid:c5c82134-afc1-4bdf-83f8-4b9b969440c3
Page Count                      : 47

EXIF Metadata provided by EXIF.tools