MVME5500 Series VME Single Board Computer Data Sheet MVME5100 DS

User Manual: MVME5100 Series

Open the PDF directly: View PDF .
Page Count: 6

Download
Open PDF In Browser	View PDF

Datasheet

M V M E 55 0 0 S e r i e s
V M E S in g l e -B o a r d
Computer

Motorola's highest performance VMEbus single-board computer

The MVME5500 is the latest flagship of the Motorola VME product line, enabling
higher levels of performance in a single VMEbus slot. The MVME5500 utilizes the
latest MPC7455 processor running at 1 GHz, which is ideal for data intensive
applications.
The MVME5500 provides more than just better processor performance; it also provides
balanced performance from the processor, memory, dual independent local buses and
I/O subsystems. The powerful Marvell system controller, with support for a 133 MHz
host bus and a 133 MHz SDRAM memory bus, is well matched to the high speed
processor. To match the system I/O to the outstanding processor performance, the
MVME5500 provides dual 64-bit, 33/66 MHz PCI buses. Each PCI bus has a PMC site
supporting cards running at 33 or 66 MHz. The Universe II VME interface and PMCspan
connector are isolated from the PMC sites on a dedicated 33 MHz PCI bus segment so
that both PMC sites are capable of 66 MHz operation. The MVME5500 also offers a
Gigabit Ethernet interface, a 10/100BaseTX Ethernet interface and two serial ports. All
of this adds up to a set of well-balanced, high-performance subsystems for
unparalleled performance.

®

The MVME5500 series is designed to meet the needs of OEMs including those in
defense and aerospace, industrial automation and medical imaging market segments.
Customers looking for a "technology refresh" for their application while maintaining
backward compatibility with their existing VMEbus infrastructure can upgrade to the
MVME5500 series and take advantage of the enhanced performance features.

■

MPC7455 PowerPC processor at 1 GHz

■

256KB of on-chip L2 cache and 2MB of L3 cache

■

AltiVec™ coprocessor for high-performance
computational applications

■

512MB of on-board 133 MHz SDRAM ECC memory
and 512MB additional memory via a memory
mezzanine card for a total of 1GB of memory

L3 Cache
2MB

■

Two banks of soldered Flash memory, 32MB and 8MB

MPC7455
1 GHz

■

Dual independent 64-bit PCI buses and PMC sites
with a bus speed of up to 66 MHz

■

Gigabit Ethernet interface plus an additional
10/100BaseTX Ethernet interface

■

64-bit PCI expansion mezzanine connector allowing
up to four more PMCs

■
■

■

I/O compatibility with MVME51xx family
Single VME slot even when fully configured with two
PMC modules or one PMC module and an add-on
memory mezzanine
Support for processor PMCs (PrPMCs)

SDRRAM
Mezzanine
512MB

COM1
FP I/O

Battery

SDRRAM
133 MHz
512MB

A32/D64-bit, 133MHz

COM2
Planar

PCI Bridge &
Memory Controller
Discovery

EIA232

EIA232

UART

UART

Port 2
10/100BaseTX
FP I/O

Port 1
10/100/1000
BaseTX
FP I/O

Flash
32MB
(soldered)
8MB
(soldered)

66 MHz PCI Local Bus
- A32/D64-bit

Gigabit 66 MHz PCI Local Bus
Ethernet
- A32/D64-bit
Contoller
Ethernet
10/100BaseTX
PHY

NVRAM
RTC

PCI
Bridge

PMC
Slot 2

33 MHz PCI Local Bus
- A32/D64-bit

IPMC
Slot 1

PMCspan
Connector
Universe II
PMC
FP I/O

PMC
FP I/O

P2

P1

MVME5500 Series Details

MVME5500 SERIES DETAILS
Backward Compatibility

The MVME5500 continues the direction that Motorola started with the MVME5100 series of providing a migration
path from Motorola's embedded controllers and single-board computers (SBCs) to a single platform. This migration
path enables OEMs to support varying I/O requirements with the same base platform, simplifying part number
maintenance, technical expertise requirements and sparing.
The MVME5500 series offers customers a migration path from the MVME2300, MVME2400, MVME2600,
MVME2700 and MVME5100 boards to allow them to take advantage of features such as the MPC7455 processor,
Gigabit Ethernet and dual independent 33/66 MHz PMC sites.
IPMC Modules

The IPMC761 and IPMC712 are optional add-on PMC modules that provide backward compatibility with previous
generation Motorola products (such as MVME2600, MVME2700 and MVME5100 in IPMC mode) using the MVME761
or MVME712M transition module. IPMC modules provide rear I/O support for the following:
• One single-ended Ultra Wide SCSI port
• One parallel port
• Four serial ports (two or three async and one or two sync/async, depending on module)
With an IPMC installed, one PMC slot is still available, providing support for OEM product customization.
P2 I/O Modes

Like the MVME5100 series, the MVME5500 series supports two, jumper-configurable P2 I/O modes: PMC mode and
IPMC mode. PMC mode is backward compatible with the MVME2300/MVME2400 and MVME5100 in PMC mode. In
PMC mode, 64 pins from PMC slot 1 and 46 pins from PMC slot 2 are available on P2 for PMC rear I/O. In IPMC mode,
the MVME5500 series supports legacy MVME761 or MVME712M I/O modules (with limited PMC I/O) when an
IPMC761 or IPMC712 PMC card is populated in PMC slot 1. In this configuration, PMC slot 2 contains some signals
that are reserved for extended SCSI.
Transition Modules
MVME761

The MVME761 transition module provides industry-standard connector access to the IEEE 1284 parallel port, a
10BaseT or 100BaseT port via an RJ-45 connector, two DB-9 connectors providing access to the asynchronous serial
ports configured as EIA-574 DTE and two HD-26 connectors providing access to the sync/async serial ports. These
serial ports, labeled as Serial 3 and Serial 4 on the faceplate of the MVME761, are individually user-configurable as
EIA-232, EIA-530, V.35, or X.21 DCE or DTE via the installation of Motorola Serial Interface Modules (SIMs).
A P2 adapter board provides interface signals to the MVME761 transition module. Two separate P2 adapter boards
are available: one for 3-row backplanes and one for 5-row backplanes. The 3-row P2 adapter board provides
connection for 8-bit SCSI. A 5-row P2 adapter board supports 16-bit SCSI and PMC I/O.
MVME712M

The MVME712M transition module provides industry-standard connector access to the Centronics parallel port, a
narrow SCSI port, and four DB-25 connectors providing access to the asynchronous/synchronous serial ports jumper
configurable as EIA-232 DCE or DTE. A P2 adapter board provides interface signals to the MVME712M transition
module. The 3-row P2 adapter board also provides connection for 8-bit SCSI.
To gain access to the additional user-definable I/O pins provided via the 5-row VME64 extension connector, a special
P2 adapter board is available. This adapter panel replaces the traditional 3-row P2 adapter board and extends its
capability by providing access to the PMC I/O pins.

2

MVME5500 Series

Software Support

Firmware Monitor

Firmware must fulfill the traditional functions of power-on self-test (POST), initialization, low-level setup and debug,
and operating system booting. Motorola's innovative firmware (known as MOTLoad) that is resident on the
MVME5500 exceeds these requirements with expanded features such as interrupt driven I/O, more comprehensive
power-up tests and extensive diagnostics with new scripting capability. And of course, MOTLoad provides a
debugger interface similar to the time proven "BUG" interface on previous VMEbus boards from Motorola.
Operating Systems and Kernels

WindRiver Systems VxWorks, TimeSys Linux, Green Hills Software INTEGRITY and LynuxWorks LynxOS are available
for the MVME5500.
Libraries

VSI/Pro VSIPL libraries from MPI Software Technology are available on the MVME5500.
Specifications

SPECIFICATIONS
Processor

Counters/Timers

Microprocessor:

MPC7455

Clock Frequency:

1 GHz

On-chip L1 Cache (I/D):

32KB/32KB

On-chip L2 Cache (I/D):

256KB

L3 Cache:

2MB

System Controller

TOD Clock Device:

Eight, 32-bit programmable

Watchdog Timer:

Time-out generates reset

VMEbus Interface: ANSI/VITA 1-1994 VME64 (IEEE STD
1014)
Controller:

Marvell GT-64260B

Main Memory

Speed:
Capacity:

Configurations:

PC133 ECC SDRAM
133 MHz
512MB on-board, expandable to 1GB with
add-on memory mezzanine card. Note: If a
PMC module is plugged into PMC slot 1,
the memory mezzanine card cannot be
used because the PMC module covers the
memory mezzanine connector.
512MB in two banks

A16-A32; D08-D64, SCT, BLT

DTB Slave:

A24-A32; D08-D64, BLT, UAT
IRQ 1-7/Any one of seven IRQs

System Controller:

Yes, jumperable or auto detect

Location Monitor:

Two, LMA32

Ethernet Interfaces
Port 1
Controller:
Interface Speed:

EEPROM, on-board programmable

Routed to front panel RJ-45
Controller integrated into GT-64260B
system controller

Controller:

Write Protection:

32MB of surface-mount Flash is writeprotectable via jumper

Interface Speed:
Connector:

NVRAM

Cell Storage Life:
Cell Capacity Life:
Removable Battery:

50 years at 55° C
5 years at 100% duty cycle, 25° C
Yes

10/100/1000Mb/s

Port 2

40MB total in two banks of 32MB and
8MB, both soldered

32KB (4KB available for users)

Intel 82544EI Gigabit Ethernet controller

Connector:
Capacity:

Capacity:

RR/PRI

Interrupt
Handler/Generator:

Flash Memory
Type:

Tundra Universe II

DTB Master:

Arbiter:
Type:

M48T37V

Real-Time
Timers/Counters:

10/100Mb/s
Routed to front panel RJ-45 or optionally
routed to P2, RJ-45 on MVME761

Asynchronous Serial Ports
Controller:

Two TL16C550C UARTs

Number of Ports:

Two, 16550 compatible

Async Baud Rate, b/s
max.:
Connector:

38.4K EIA-232, 115Kb/s raw
Routed to front panel RJ-45; one on planar
for development use

MVME5500 Series

3

Dual IEEE P1386.1 PCI Mezzanine Card Slots
Address/Data:
PCI Bus Clock:
Signaling:
Power:

A32/D32/D64, PMC PN1, PN2, PN3, PN4
connectors
33/66 MHz
3.3V or 5V, configurable with keying pin
+3.3V, +5V, ±12V

Module Types:

Two single-wide or one double-wide, front
panel or P2 I/O, PMC and PrPMC support
Note: If a PMC module is plugged in PMC slot 1, the memory
mezzanine card cannot be used because the PMC module covers the
memory mezzanine connector.

Power Requirements
+5V ± 5%
MVME5500-0163:

6.7 A typ., 8.0 A max.

MVME5500-0163 with
memory mezzanine:

7.5 A typ., 9.0 A max.

MVME5500-0163 with
IPMC712/761:

7.6 A typ., 9.2 A max.

Note: In a 3-row chassis, PMC current should be limited to 19.8 watts
(total of both PMC slots). In a 5-row chassis, PMC current should be
limited to 46.2 watts (total of both PMC slots).

Board Size

PCI Expansion Connector
Address/Data:
PCI Bus Clock:
Signaling:
Power:
Connector:

IPMC Modules

A32/D32/D64
33 MHz

PCI Bus Clock:
Signaling:
Module Type:

Width:
Max. Component
Height:

19.8 mm (0.8 in.)
14.8 mm (0.58 in.)

A32/D32/D64, PMC PN1, PN2, PN3, PN4
connectors
33 MHz

Controller:
Number of Ports:
Configuration:

5V
Basic single-wide; P2 I/O

Async Baud Rate, b/s
max.:

16C550 UART; 85230/8536
Two (IPMC761); three (IPMC712)
EIA-574 DTE (IPMC761);
EIA-232 (IPMC712)
38.4K EIA-232, 115Kb/s raw

Parallel Port
Controller:

PCI Local Bus DMA:
Asynchronous (8-bit
mode):

Symbios 53C895A
Yes, with PCI local bus burst
5.0MB/s

20.0MB/s (8-bit mode), 40.0MB/s (16-bit
mode)
Note: 16-bit SCSI operation precludes the use of some PMC slot 2
signals.

Controller:
Configuration:

Ultra SCSI:

Synchronous Serial Ports
Controller:
Number of Ports:
Configuration:

MVME5500 Series

261.8 mm (10.3 in.)

Asynchronous Serial Ports

SCSI Bus

4

160.0 mm (6.3 in.)

114-pin connector located on MVME5500
planar, same location as on MVME5100
planar

PMC Interface
Address/Data:

233.4 mm (9.2 in.)

Depth:
Front Panel Height:

5V
+3.3V, +5V, ±12V

Height:

85230/8536
Two (IPMC761); one (IPMC712)
IPMC761: TTL to P2 (both ports), SIM
configurable on MVME761;
IPMC712: EIA-232 to P2

Baud Rate, bps max.:

2.5M sync, 38.4K async

Oscillator Clock Rate
(PCLK):

10 MHz/5 MHz

Modes:

PC97307
8-bit bi-directional, full IEEE 1284 support;
Centronics compatible (minus EPP and
ECP on MVME712M)
Master only

Power Requirements
(Additional power load placed on MVME5500 with IPMC installed)
IPMC761
IPMC712
+5V:

0.5 A max.

0.5 A max.

+3.3V:

0.75 A max.

0.75 A max.

Transition Modules

I/O Connectors
MVME761
Asynchronous Serial Ports:
Synchronous Serial Ports:

Parallel Port:
Ethernet:
SCSI:

MVME712M

Two, DB-9 labeled as COM1 and COM2

Three, DB-25 labeled as Serial 1, Serial 2, and Serial 3

Two HD-26 labeled as Serial 3 and Serial 4 (userconfigurable via installation of SIMs),
Two 60-pin connectors on MVME761 planar for
installation of two SIMs

One, DB-25 labeled as Serial 4

HD-36, Centronics compatible

D-36, Centronics compatible

10BaseT or 100BaseT, RJ-45

NA

8- or 16-bit, 50- or 68-pin connector via P2 adapter

8-bit, standard SCSI D-50

Board Size

All Modules

Height:

233.4 mm (9.2 in.)

Depth:

80.0 mm (3.1 in.)

Front Panel Height:

261.8 mm (10.3 in.)

Front Panel Width:

MVME761: 19.8 mm (0.8 in.)
MVME712M: 39.6 mm (1.6 in.)

Environmental

Temperature:

Vibration:

Safety
Operating

Non-operating

0° C to +55° C
(inlet air temp.
w/forced air cooling)

–40° C to +85° C

All printed wiring boards (PWBs) are manufactured with a flammability
rating of 94V-0 by UL recognized manufacturers.

Electromagnetic Compatibility (EMC)
1 G sinusoidal,
5–100 Hz
2 axes

Intended for use in systems meeting the following regulations:
U.S.: FCC Part 15, Subpart B, Class A (non-residential)
Canada: ICES-003, Class A (non-residential)
Motorola Computer Group board products are tested in a
representative system to the following standards, results pending for
configurations with IPMC712:
CE Mark per European EMC Directive 89/336/EEC with
Amendments; Emissions: EN55022 Class A; Immunity: EN55024

MVME5500 Series

5

Ordering Information

ORDERING INFORMATION
Part Number

Description
MVME5500-0161

1 GHz MPC7455 PowerPC processor, 512MB SDRAM, Scanbe handles

MVME5500-0163

1 GHz MPC7455 PowerPC processor, 512MB SDRAM, IEEE handles

Memory
RAM5500-007

512MB memory mezzanine expansion card

IPMC712-001

Multifunction rear I/O PMC module; 8-bit SCSI, Ultra Wide SCSI, one parallel port, three async and one sync/async serial ports

Related Products

MVME712M
IPMC761-001

Transition module with one DB-25 sync/async serial port, three DB-25 async serial port, one AUI connector, one D-36 parallel port, and one
50-pin 8-bit SCSI; includes 3-row DIN P2 adapter board and cable
Multifunction rear I/O PMC module; 8-bit SCSI, one parallel port, two async and two sync/async serial ports

MVME761-001

Transition module with two DB-9 async serial port connectors, two HD-26 sync/async serial port connectors, one HD-36 parallel port connector,
one RJ-45 10/100 Ethernet connector; includes 3-row DIN P2 adapter board and cable (for 8-bit SCSI)

MVME761-011

Transition module with two DB-9 async serial port connectors, two HD-26 sync/async serial port connectors, one HD-36 parallel port connector,
one RJ-45 10/100 Ethernet connector; includes 5-row DIN P2 adapter board and cable (for 16-bit SCSI); requires backplane with 5-row DIN
connectors

PMCSPAN1-002

Primary PMCSPAN-002 with original VME Scanbe ejector handles

PMCSPAN1-010

Secondary PMCSPAN-010 with original VME Scanbe ejector handles

Documentation
V5500A/IH

MVME5500 Single-Board Computer Installation and Use

V5500A/PG

MVME5500 Single-Board Computer Programmer’s Reference Guide

VME761A/IH

MVME761 Transition Module Installation and Use

VME712MA/IH

MVME712M Transition Module Installation and Use

MOTLODA/UM

MOTLoad Firmware Package User’s Manual

VIPMCA/IH
PMCSPANA/IH

IPMC712/761 I/O Module Installation and Use
PMCspan PMC Adapter Carrier Board Installation and Use

Documentation is available for online viewing and ordering at http://www.motorola.com/computer/literature

Motorola Computer Group
Regional Offices

NORTH AMERICA: Tempe, AZ 1 800 759 1107 or +1 602 438 5720

ASIA: Shanghai, China +86 21 5292 5693

EUROPE: Loughborough, UK +44 1509 634300

PACIFIC RIM: Tokyo, Japan +81 3 5424 3101

EAST MEDITERRANEAN: Tel Aviv, Israel +972 3 568 4388

ASIA/PACIFIC: Hong Kong +852 2966 3210

www.motorola.com/computer

MOTOROLA and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. PowerPC is a trademark
of IBM Corp. and used under license. All other product or service names are the property of their respective owners.
© Motorola Inc. 2003, 2002
This datasheet identifies products, their specifications, and their characteristics, which may be suitable for certain
applications. It does not constitute an offer to sell or a commitment of present or future availability, and should not be
relied upon to state the terms and conditions, including warranties and disclaimers thereof, on which Motorola may
sell products. A prospective buyer should exercise its own independent judgement to confirm the suitability of the
products for particular applications. Motorola reserves the right to make changes, without notice, to any products or
information herein which will, in its sole discretion, improve reliability, function, or design. Motorola does not assume
any liability arising out of the application or use of any product or circuit described herein; neither does it convey any
license under its patent or other intellectual property rights or under others. This disclaimer extends to any prospective
buyer, and it includes Motorola's licensee, licensee's transferees, and licensee's customers and users. Availability of
some of the products and services described herein may be restricted in some locations.

M5500-D5 08/03



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Subject                         : 
Modify Date                     : 2003:08:15 08:36:19-07:00
Create Date                     : 2002:08:30 07:50:16Z
Page Count                      : 6
Creation Date                   : 2002:08:30 07:50:16Z
Mod Date                        : 2003:08:15 08:36:19-07:00
Producer                        : Acrobat Distiller 5.0.5 (Windows)
Author                          : Motorola Computer Group
Metadata Date                   : 2003:08:15 08:36:19-07:00
Creator                         : Motorola Computer Group
Description                     : 
Title                           : MVME5500 Series VME Single-Board Computer data sheet

EXIF Metadata provided by EXIF.tools