MYSTRAN Users Manual
User Manual:
Open the PDF directly: View PDF
Page Count: 283 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Users Reference Manual
- Table of Contents
- 1 Introduction
- 2 General description of input data
- 3 The finite element model
- 3.1 Grid points
- 3.2 Elements
- 3.3 Applied loads
- 3.3.1 Forces and moments directly applied to grids
- 3.3.2 Pressure loads on plate elements
- 3.3.3 Gravity loads
- 3.3.4 Equivalent loads due to thermal expansion
- 3.3.5 Equivalent loads due to enforced displacements
- 3.3.6 Loads due to rigid body rotation about a specified grid (RFORCE)
- 3.3.7 LOAD Bulk Data entry – combining loads
- 3.4 Constraints
- 3.5 Mass
- 3.6 Displacement set notation
- 4 MYSTRAN solution types
- 5 References
- 6. Detailed description of input data
- 6.1 File Management
- 6.2 Executive Control
- 6.3 Case Control
- 6.3.1 Detailed Description of Case Control Entries
- 6.3.1.1 BEGIN BULK
- 6.3.1.2 ACCELERATION
- 6.3.1.3 DISPLACEMENT
- 6.3.1.4 ECHO
- 6.3.1.5 ELDATA
- 6.3.1.7 ENFORCED
- 6.3.1.8 ELSTRAIN
- 6.3.1.9 ELSTRESS
- 6.3.1.10 FORCE
- 6.3.1.11 GPFORCES
- 6.3.1.12 LABEL
- 6.3.1.13 LOAD
- 6.3.1.14 MEFFMASS
- 6.3.1.15 METHOD
- 6.3.1.16 MPC
- 6.3.1.17 MPCFORCES
- 6.3.1.18 MPFACTOR
- 6.3.1.19 OLOAD
- 6.3.1.20 SET
- 6.3.1.21 SPC
- 6.3.1.22 SPCFORCES
- 6.3.1.23 STRAIN
- 6.3.1.24 STRESS
- 6.3.1.25 SUBCASE
- 6.3.1.26 SUBTITLE
- 6.3.1.27 TEMPERATURE
- 6.3.1.28 TITLE
- 6.3.1.29 VECTOR
- 6.3.1 Detailed Description of Case Control Entries
- 6.4 Bulk Data
- 6.4.1 Detailed Description of Bulk Data Entries
- 6.4.1.1 ASET
- 6.4.1.2 ASET1
- 6.4.1.3 BAROR
- 6.4.1.4 CBAR
- 6.4.1.5 CBUSH
- 6.4.1.6 CELAS1
- 6.4.1.7 CELAS2
- 6.4.1.8 CELAS3
- 6.4.1.9 CELAS4
- 6.4.1.10 CHEXA
- 6.4.1.11 CMASS1
- 6.4.1.12 CMASS2
- 6.4.1.13 CMASS3
- 6.4.1.14 CMASS4
- 6.4.1.15 CONM2
- 6.4.1.16 CONROD
- 6.4.1.17 CORD1C
- 6.4.1.18 CORD1R
- 6.4.1.19 CORD1S
- 6.4.1.20 CORD2C
- 6.4.1.21 CORD2R
- 6.4.1.22 CORD2S
- 6.4.1.23 CPENTA
- 6.4.1.24 CQUAD4
- 6.4.1.25 CQUAD4K
- 6.4.1.26 CROD
- 6.4.1.27 CSHEAR
- 6.4.1.28 CTETRA
- 6.4.1.29 CTRIA3
- 6.4.1.30 CTRIA3K
- 6.4.1.31 CUSERIN
- 6.4.1.32 DEBUG
- 6.4.1.33 EIGR
- 6.4.1.34 EIGRL
- 6.4.1.35 FORCE
- 6.4.1.36 GRAV
- 6.4.1.37 GRDSET
- 6.4.1.38 GRID
- 6.4.1.39 LOAD
- 6.4.1.40 MAT1
- 6.4.1.41 MAT2
- 6.4.1.42 MAT8
- 6.4.1.43 MAT9
- 6.4.1.44 MOMENT
- 6.4.1.45 MPC
- 6.4.1.46 MPCADD
- 6.4.1.47 OMIT
- 6.4.1.48 OMIT1
- 6.4.1.49 PARAM
- 6.4.1.50 PARVEC
- 6.4.1.51 PARVEC1
- 6.4.1.52 PBAR
- 6.4.1.53 PBARL
- 6.4.1.54 PBUSH
- 6.4.1.55 PCOMP
- 6.4.1.56 PCOMP1
- 6.4.1.57 PELAS
- 6.4.1.58 PLOAD2
- 6.4.1.59 PLOAD4
- 6.4.1.60 PLOTEL
- 6.4.1.61 PROD
- 6.4.1.62 PSHEAR
- 6.4.1.63 PSHELL
- 6.4.1.64 PSOLID
- 6.4.1.65 PUSERIN
- 6.4.1.66 RBE2
- 6.4.1.67 RBE3
- 6.4.1.68 RFORCE
- 6.4.1.69 RSPLINE
- 6.4.1.70 SEQGP
- 6.4.1.71 SLOAD
- 6.4.1.72 SPC
- 6.4.1.73 SPC1
- 6.4.1.74 SPCADD
- 6.4.1.75 SPOINT
- 6.4.1.76 SUPORT
- 6.4.1.77 TEMP
- 6.4.1.78 TEMPD
- 6.4.1.79 TEMPP1
- 6.4.1.80 TEMPRB
- 6.4.1.81 USET
- 6.4.1.82 USET1
- 6.4.1 Detailed Description of Bulk Data Entries
- 7 Appendix A: MYSTRAN Sample Problem
- 8 Appendix B: Equations for the reduction of the G-set to the A-set and solution for displacements and constraint forces
- 9 Appendix C: Equations for element stress recovery
- 10 Appendix D: Craig-Bampton Model Generation
- 10.1 Craig-Bampton Equations of Motion for Substructures
- 10.2 Development of Displ Output Transformation Matrices (Displ OTM’s)
- 10.3 Development of Load Output Transformation Matrices (Load OTM’s)
- 10.4 Development of Acceleration Output Transfer Matrices (Accel OTM)
- 10.5 Correspondence between matrix names and CB Equation Variables
- 10.6 Craig-Bampton model generation example problem
- 11. Appendix E: Derivation of the RBE3 element constraint equations
- 11. Appendix E: Derivation of the RBE3 element constraint equations