Nikon 1 J3 Manual User Guide And Product Specification
User Manual: Nikon-1-J3-Manual-User-Guide-and-Product-Specification
Open the PDF directly: View PDF .
Page Count: 234
Download | |
Open PDF In Browser | View PDF |
DIGITAL CAMERA Reference Manual En Thank you for your purchase of a Nikon digital camera. To get the most from your camera, please be sure to read all instructions thoroughly and keep them where they will be read by all who use the product. Camera Settings The explanations in this manual assume that default settings are used. Symbols and Conventions To make it easier to find the information you need, the following symbols and conventions are used: This icon marks cautions; information that should be read before D use to prevent damage to the camera. This icon marks notes; information that should be read before A using the camera. 0 This icon marks references to other pages in this manual. The 1, 3, 4, and 2 symbols represent up, down, left, and right on the multi selector. Digitutor “Digitutor”, a series of “watch and learn” manuals in movie form, is available from the following website: http://www.nikondigitutor.com/index_eng.html A For Your Safety Before using the camera for the first time, read the safety instructions in “For Your Safety” (0 x–xii). Getting the Most from Your Camera 0 ii Table of Contents 0 iv s Introduction z Auto Mode 6 Creative Mode b Best Moment Capture Mode 9 Motion Snapshot Mode y Recording and Viewing Movies t More on Photography I More on Playback Q Connections o The Playback Menu i The Shooting Menu ( The Movie Menu ) The Image Processing Menu g The Setup Menu n Technical Notes 0 1 0 21 0 31 0 45 0 53 0 57 0 67 0 79 0 91 0 107 0 117 0 139 0 143 0 157 0 165 i Getting the Most from Your Camera Take photos with the shutter-release button. Photos can be taken in any mode by pressing the shutterrelease button. See page 6 for more information. Shutter-release button Shoot movies with the movie-record button. Movies can be recorded by pressing the movie-record button in auto (0 29), creative (0 44), and advanced movie (0 57) modes. Movie-record button Create short movies with music. Install the supplied software (0 91), copy photos and movies to your computer using ViewNX 2 (0 95), and use Short Movie Creator to create short movies (0 98). View short movies in high definition. Transfer short movies to the camera (0 99) and use an HDMI cable to connect the camera to an HDTV (0 100). ii Accessories Expand your photographic horizons with a wide variety of interchangeable lenses and other accessories (0 165). Lenses Wireless mobile adapters Software for Nikon digital cameras (available on CD) Mount adapters Waterproof cases iii Table of Contents Getting the Most from Your Camera ......................................... ii Accessories .............................................................................................. iii For Your Safety............................................................................... x Notices..........................................................................................xiii Introduction 1 Before You Begin ...........................................................................1 Parts of the Camera.......................................................................2 The Camera Body ................................................................................... 2 The Monitor.............................................................................................. 4 The Mode Dial ......................................................................................... 6 The Multi Selector .................................................................................. 7 The G Button.................................................................................... 8 & (Feature) .............................................................................................10 First Steps......................................................................................11 Auto Mode 21 Taking Photos in Auto Mode.....................................................21 Viewing Photographs .................................................................27 Deleting Pictures ..................................................................................28 Recording Movies in Auto Mode ..............................................29 Creative Mode 31 Choosing a Creative Mode.........................................................31 Choosing a Scene ........................................................................32 Taking Photos in P, S, A, and M Modes ......................................34 P Programmed Auto............................................................................34 S Shutter-Priority Auto........................................................................35 A Aperture-Priority Auto ....................................................................36 M Manual .................................................................................................37 Backlighting .................................................................................40 Easy Panorama.............................................................................41 Recording Movies in Creative Mode........................................44 iv Best Moment Capture Mode 45 Slow View......................................................................................45 Smart Photo Selector..................................................................47 Viewing Photos Taken with the Smart Photo Selector ........ 50 Choosing the Best Shot ..................................................................... 50 Deleting Pictures.................................................................................. 51 Motion Snapshot Mode 53 Shooting in Motion Snapshot Mode ....................................... 53 Viewing Motion Snapshots .......................................................56 Deleting Motion Snapshots ............................................................. 56 Recording and Viewing Movies 57 Recording HD Movies................................................................. 58 Recording Slow-Motion Movies ............................................... 62 Viewing Movies ...........................................................................65 Deleting Movies ................................................................................... 66 More on Photography 67 Single-Frame, Continuous, and Self-Timer Modes ...............67 Continuous Mode................................................................................ 67 Self-Timer Modes................................................................................. 69 Exposure Compensation ........................................................... 71 The Built-in Flash......................................................................... 72 Choosing a Flash Mode ..................................................................... 73 The WU-1b Wireless Mobile Adapter ......................................76 More on Playback 79 Photo Information ...................................................................... 79 Thumbnail Playback ................................................................... 82 Calendar Playback ...................................................................... 83 Playback Zoom ............................................................................ 84 v Deleting Pictures .........................................................................85 Deleting the Current Picture............................................................85 The Playback Menu .............................................................................85 Rating Pictures .............................................................................86 Slide Shows...................................................................................87 Connections 91 Installing the Supplied Software..............................................91 System Requirements.........................................................................93 Viewing and Editing Pictures on a Computer ........................95 Transferring Pictures...........................................................................95 Viewing Pictures ...................................................................................96 Creating Short Movies........................................................................98 Viewing Pictures on TV............................................................ 100 High-Definition Devices.................................................................. 100 Printing Photographs .............................................................. 102 Connecting the Printer.................................................................... 102 Printing Pictures One at a Time.................................................... 103 Printing Multiple Pictures............................................................... 104 Creating a DPOF Print Order: Print Set ...................................... 106 The Playback Menu 107 Selecting Multiple Images.............................................................. 109 Image Review ............................................................................ 110 Rotate Tall .................................................................................. 110 Protect ........................................................................................ 110 Rating.......................................................................................... 110 D-Lighting.................................................................................. 111 Resize .......................................................................................... 112 Crop............................................................................................. 113 Face-Priority Zoom................................................................... 114 Edit Movie .................................................................................. 114 Change Theme .......................................................................... 115 vi The Shooting Menu 117 Reset Shooting Options ...........................................................119 Exposure Mode..........................................................................119 Image Quality.............................................................................120 Image Size...................................................................................120 Number of Shots Saved ...........................................................123 Movie Before/After ...................................................................123 File Format..................................................................................124 Metering .....................................................................................124 Auto Distortion Control ...........................................................125 Color Space.................................................................................126 Active D-Lighting ......................................................................127 Long Exposure NR.....................................................................128 Optical VR ...................................................................................128 Electronic VR ..............................................................................129 Focus Mode ................................................................................129 Manual Focus ......................................................................................132 AF-Area Mode ............................................................................134 Focus Lock............................................................................................135 Face-Priority ...............................................................................136 Built-in AF Assist........................................................................136 Flash Compensation.................................................................137 The Movie Menu 139 Reset Movie Options.................................................................140 Frame Rate..................................................................................140 Movie Settings ...........................................................................141 Movie Sound Options...............................................................142 vii The Image Processing Menu 143 Reset Processing Options ....................................................... 144 White Balance............................................................................ 144 Fine-Tuning White Balance ........................................................... 145 Preset Manual..................................................................................... 146 ISO Sensitivity ........................................................................... 149 Picture Control .......................................................................... 150 Modifying Picture Controls............................................................ 150 Custom Picture Control ........................................................... 154 Edit/Save............................................................................................... 154 Load from/Save to Card.................................................................. 155 High ISO Noise Reduction....................................................... 156 The Setup Menu 157 Reset Setup Options ................................................................ 158 Format Memory Card............................................................... 158 Slot Empty Release Lock ......................................................... 159 Display ........................................................................................ 159 Display Brightness ............................................................................ 159 Grid Display ......................................................................................... 159 Shooting............................................................................................... 159 Playback................................................................................................ 160 Sound Settings.......................................................................... 160 Auto Power Off.......................................................................... 160 Shutter Button AE Lock ........................................................... 161 Flicker Reduction...................................................................... 161 Reset File Numbering .............................................................. 161 Time Zone and Date................................................................. 162 Language ................................................................................... 162 Auto Image Rotation................................................................ 163 Pixel Mapping ........................................................................... 164 Firmware Version ..................................................................... 164 viii Technical Notes 165 Optional Accessories ................................................................165 Approved Memory Cards................................................................167 Approved Eye-Fi Cards ....................................................................168 Attaching a Power Connector and AC Adapter......................169 Storage and Cleaning...............................................................171 Storage ..................................................................................................171 Cleaning ................................................................................................171 Caring for the Camera and Battery: Cautions......................172 Available Settings .....................................................................176 Defaults.......................................................................................180 Memory Card Capacity.............................................................181 Troubleshooting........................................................................184 Battery/Display ...................................................................................184 Shooting (All Modes)........................................................................185 Shooting (P, S, A, and M Modes).....................................................186 Movies....................................................................................................186 Playback ................................................................................................187 Miscellaneous .....................................................................................187 Error Messages...........................................................................188 Specifications.............................................................................191 Nikon 1 J3 Digital Camera ..............................................................191 Battery Life ...........................................................................................208 Index ............................................................................................209 ix For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them. The consequences that could result from failure to observe the precautions listed in this section are indicated by the following symbol: icon marks warnings. To prevent possible injury, read all warnA This ings before using this Nikon product. ❚❚WARNINGS A Keep the sun out of the frame. Keep the sun well out of the frame when shooting backlit subjects. Sunlight focused into the camera when the sun is in or close to the frame could cause a fire. A Turn off immediately in the event of malfunction. Should you notice smoke or an unusual smell coming from the equipment or AC adapter (available separately), unplug the AC adapter and remove the battery immediately, taking care to avoid burns. Continued operation could result in injury. After removing the battery, take the equipment to a Nikon-authorized service center for inspection. A Do not disassemble. Touching the product’s internal parts could result in injury. In the event of malfunction, the product should be repaired only by a qualified technician. Should the product break open as the result of a fall or other accident, remove the battery and/or AC adapter and then take the product to a Nikon-authorized service center for inspection. A Keep out of reach of children. Failure to observe this precaution could result in injury. In addition, note that small parts constitute a choking hazard. Should a child swallow any part of this equipment, consult a physician immediately. A Do not use in the presence of flammable A Do not place the strap around the neck of gas. Do not use electronic equipment in the presence of flammable gas, as this could result in explosion or fire. x an infant or child. Placing the camera strap around the neck of an infant or child could result in strangulation. A Do not remain in contact with the camera, battery, or charger for extended periods while the devices are on or in use. Parts of the device become hot. Leaving the device in direct contact with the skin for extended periods may result in low-temperature burns. A Do not aim the flash at the operator of a motor vehicle. Failure to observe this precaution could result in accidents. A Observe caution when using a flash. • Using the camera with the flash in close contact with the skin or other objects could cause burns. • Using a flash close to the subject’s eyes could cause temporary visual impairment. Particular care should be observed when photographing infants, when the flash should be no less than one meter (39 in.) from the subject. A Avoid contact with liquid crystal. Should the display break, care should be taken to avoid injury due to broken glass and to prevent the liquid crystal from the display touching the skin or entering the eyes or mouth. A Observe proper precautions when handling batteries. Batteries may leak or explode if improperly handled. Observe the following precautions when handling batteries for use in this product: • Use only batteries approved for use in this equipment. • Do not short or disassemble the battery. • Be sure the product is off before replacing the battery. If you are using an AC adapter, be sure it is unplugged. • Do not attempt to insert the battery upside down or backwards. • Do not expose the battery to flame or to excessive heat. • Do not immerse in or expose to water. • Replace the terminal cover when transporting the battery. Do not transport or store the battery with metal objects such as necklaces or hairpins. • Batteries are prone to leakage when fully discharged. To avoid damage to the product, be sure to remove the batter y when no charge remains. • When the battery is not in use, attach the terminal cover and store in a cool, dry place. • The battery may be hot immediately after use or when the product has been used on battery power for an extended period. Before removing the battery turn the camera off and allow the battery to cool. • Discontinue use immediately should you notice any changes in the battery, such as discoloration or deformation. xi A Observe proper precautions when handling A Use appropriate cables. When connectthe charger: • Keep dry. Failure to observe this precaution could result in fire or electric shock. • Do not short the charger terminals. Failure to observe this precaution could result in overheating and damage to the charger. • Dust on or near the metal parts of the plug should be removed with a dry cloth. Continued use could result in fire. • Do not go near the charger during thunderstorms. Failure to observe this precaution could result in electric shock. • Do not handle the plug or charger with wet hands. Failure to observe this precaution could result in electric shock. • Do not use with travel converters or adapters designed to convert from one voltage to another or with DCto-AC inverters. Failure to observe this precaution could damage the product or cause overheating or fire. xii ing cables to the input and output jacks, use only the cables provided or sold by Nikon for the purpose to maintain compliance with product regulations. A CD-ROMs: CD-ROMs containing software or manuals should not be played back on audio CD equipment. Playing CD-ROMs on an audio CD player could cause hearing loss or damage the equipment. Notices • No part of the manuals included • Nikon will not be held liable for any with this product may be repro- damages resulting from the use of duced, transmitted, transcribed, this product. stored in a retrieval system, or trans- • While every effort has been made to lated into any language in any form, ensure that the information in these by any means, without Nikon’s prior manuals is accurate and complete, written permission. we would appreciate it were you to • Nikon reserves the right to change bring any errors or omissions to the the specifications of the hardware attention of the Nikon representaand software described in these tive in your area (address provided manuals at any time and without separately). prior notice. Notice for Customers in Canada CAUTION ATTENTION This Class B digital apparatus com- Cet appareil numérique de la classe B plies with Canadian ICES-003. est conforme à la norme NMB-003 du Canada. Notice for Customers in Europe CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. This symbol indicates that electrical and electronic equipment is to be collected separately. This symbol on the battery indicates that the battery is to be collected separately. The following apply only to The following apply only to users in European countries: users in European countries: • All batteries, whether marked with • This product is designated for sepa- this symbol or not, are designated rate collection at an appropriate col- for separate collection at an approlection point. Do not dispose of as priate collection point. Do not dishousehold waste. pose of as household waste. • Separate collection and recycling • For more information, contact the helps conserve natural resources retailer or the local authorities in and prevent negative consequences charge of waste management. for human health and the environment that might result from incorrect disposal. • For more information, contact the retailer or the local authorities in charge of waste management. xiii Notice for Customers in the U.S.A. The Battery Charger IMPORTANT SAFETY INSTRUCTIONS—SAVE THESE INSTRUCTIONS DANGER—TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet if needed. This power unit is intended to be correctly oriented in a vertical or floor mount position. Federal Communications Commission (FCC) Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable pro- CAUTIONS tection against harmful interference in Modifications a residential installation. This equip- The FCC requires the user be notified ment generates, uses, and can radiate that any changes or modifications radio frequency energy and, if not made to this device that are not installed and used in accordance with expressly approved by Nikon Corpothe instructions, may cause harmful ration may void the user’s authority to interference to radio communications. operate the equipment. However, there is no guarantee that interference will not occur in a particu- Interface Cables lar installation. If this equipment does Use the interface cables sold or procause harmful interference to radio or vided by Nikon for your equipment. television reception, which can be Using other interface cables may determined by turning the equipment exceed the limits of Class B Part 15 of off and on, the user is encouraged to the FCC rules. xiv try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/television technician for help. Notice for Customers in the State of California WARNING: Handling the cord on this product may expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A. Tel.: 631-547-4200 Notice Concerning Prohibition of Copying or Reproduction Note that simply being in possession of material that has been digitally copied or reproduced by means of a scanner, digital camera, or other device may be punishable by law. • Items prohibited by law from being copied • Cautions on certain copies and reproductions or reproduced Do not copy or reproduce paper The government has issued cautions money, coins, securities, govern- on copies or reproductions of securities ment bonds, or local government issued by private companies (shares, bonds, even if such copies or repro- bills, checks, gift certificates, etc.), commuter passes, or coupon tickets, except ductions are stamped “Sample.” when a minimum of necessary copies The copying or reproduction of are to be provided for business use by a paper money, coins, or securities company. Also, do not copy or reprowhich are circulated in a foreign duce passports issued by the governcountry is prohibited. ment, licenses issued by public Unless the prior permission of the agencies and private groups, ID cards, government has been obtained, the and tickets, such as passes and meal copying or reproduction of unused coupons. postage stamps or post cards issued • Comply with copyright notices by the government is prohibited. The copying or reproduction of The copying or reproduction of copyrighted creative works such as stamps issued by the government books, music, paintings, woodcuts, and of certified documents stipu- prints, maps, drawings, movies, and lated by law is prohibited. photographs is governed by national and international copyright laws. Do not use this product for the purpose of making illegal copies or to infringe copyright laws. Disposing of Data Storage Devices Please note that deleting images or formatting memory cards or other data storage devices does not completely erase the original image data. Deleted files can sometimes be recovered from discarded storage devices using commercially available software, potentially resulting in the malicious use of personal image data. Ensuring the privacy of such data is the user ’s responsibility. Before discarding a data storage device or transferring ownership to another person, erase all data using commercial deletion software, or format the device and then completely refill it with images containing no private information (for example, pictures of empty sky). Care should be taken to avoid injury when physically destroying data storage devices. xv AVC Patent Portfolio License THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (I) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (II) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE http://www.mpegla.com Temperature Warnings The camera may become warm to the touch during use; this is normal and does not indicate a malfunction. At high ambient temperatures, after extended periods of continuous use, or after several photographs have been taken in quick succession, a temperature warning may be displayed, following which the camera will turn off automatically to minimize damage to its internal circuits. Wait for the camera to cool before resuming use. Use Only Nikon Brand Electronic Accessories Nikon cameras are designed to the highest standards and include complex electronic circuitry. Only Nikon brand electronic accessories (including chargers, batteries, AC adapters, and lens accessories) certified by Nikon specifically for use with this Nikon digital camera are engineered and proven to operate within the operational and safety requirements of this electronic circuitry. The use of non-Nikon electronic accessories could damage the camera and may void your Nikon warranty. The use of thirdparty rechargeable Li-ion batteries not bearing the Nikon holographic seal shown at right could interfere with normal operation of the camera or result in the batteries overheating, igniting, rupturing, or leaking. For more information about Nikon brand accessories, contact a local authorized Nikon dealer. xvi D Use Only Nikon Brand Accessories Only Nikon brand accessories certified by Nikon specifically for use with your Nikon digital camera are engineered and proven to operate within its operational and safety requirements. THE USE OF NON-NIKON ACCESSORIES COULD DAMAGE YOUR CAMERA AND MAY VOID YOUR NIKON WARRANTY. A Servicing the Camera and Accessories The camera is a precision device and requires regular servicing. Nikon recommends that the camera be inspected by the original retailer or a Nikon-authorized service representative once every one to two years, and that it be serviced once every three to five years (note that fees apply to these services). Frequent inspection and servicing are particularly recommended if the camera is used professionally. Any accessories regularly used with the camera, such as lenses, should be included when the camera is inspected or serviced. A Before Taking Important Pictures Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for damages or lost profits that may result from product malfunction. A Life-Long Learning As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education, continually-updated information is available on-line at the following sites: • For users in the U.S.A.: http://www.nikonusa.com/ • For users in Europe and Africa: http://www.europe-nikon.com/support/ • For users in Asia, Oceania, and the Middle East: http://www.nikon-asia.com/ Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently-asked questions (FAQs), and general advice on digital imaging and photography. Additional information may be available from the Nikon representative in your area. For contact information, visit http://imaging.nikon.com/ xvii xviii sIntroduction Before You Begin Before using your camera for the first time, confirm that the package contains the items listed in the User’s Manual. s 1 Parts of the Camera Take a few moments to familiarize yourself with camera controls and displays. You may find it helpful to bookmark this section and refer to it as you read through the rest of the manual. The Camera Body s 1 2 3 4 18 5 6 5 7 8 16 9 15 10 19 11 20 17 14 13 12 1 Movie-record button .................................... 29, 44, 57, 59, 63 2 Shutter-release button ....................... 23, 46, 48, 54, 61 3 Power switch........................................17 4 Mode dial................................................ 6 5 Microphone........................................142 6 Focal plane mark (E) ......................133 7 AF-assist illuminator ........................136 Self-timer lamp ...................................69 Red-eye reduction lamp ...................74 8 Eyelet for camera strap......................11 2 9 Flash pop-up button.......................... 72 10 HDMI connector cover ....................100 11 USB connector cover ......... 76, 95, 102 12 Lens release button..........................200 13 Dust shield ................................171, 172 14 Lens mount ................................. 16, 133 15 Mounting mark ................................... 16 16 Power lamp .......................................... 17 17 Body cap .............................................166 18 Built-in flash......................................... 72 19 HDMI mini-pin connector...............100 20 USB connector..................... 76, 95, 102 The Camera Body (Continued) 2 1 3 4 5 6 7 12 13 s 8 11 10 1 Monitor ....................................4, 79, 159 2 K (playback) button ............27, 50, 56 3 G (menu) button .......................... 8 4 Multi selector......................................... 7 J (OK) button....................................... 7 & (feature) ...........................................10 E (exposure compensation)............71 M (flash mode).....................................73 C (continuous shooting/ self-timer)..................................... 67, 69 5 Memory card access lamp ......... 15, 22 9 6 O (delete) button......................... 28, 85 7 Power connector cover for optional power connector......169 8 Battery-chamber/memory card slot cover latch........................... 13, 15, 169 9 Battery-chamber/ memory card slot cover... 13, 15, 169 10 Tripod socket * 11 Speaker 12 Memory card slot................................ 13 13 Battery latch......................... 13, 15, 169 * Camera does not support TA-N100 tripod mounting spacer. A Holding the Camera When framing photographs, hold the camera as shown below. Hold the camera in your right hand. Keep your elbows propped lightly against your torso. Cradle the lens with your left hand. 3 The Monitor 1 2 3 4 5 6 7 8 9 10 11 35 34 33 32 s 12 13 14 15 16 17 18 19 31 30 29 28 27 26 25 24 23 1 Shooting mode ..................................... 6 2 Live image control..............................25 Creative mode ............................. 31, 32 Best moment capture selection ....................................... 45, 47 Advanced movie selection ........ 57, 62 Exposure mode ................................ 119 3 Flexible program indicator ...............34 4 Flash mode ...........................................72 5 Self-timer ....................................... 67, 69 Continuous mode *.............................67 6 Active D-Lighting * .......................... 127 7 Picture Control * ............................... 150 8 White balance * ................................ 144 9 Movie settings (HD movies) * ........ 141 Frame rate (slow-motion movies) * ................. 140 10 Image size * ....................................... 120 11 Image quality * ................................. 120 12 Focus mode *..................................... 129 13 AF-area mode * ................................. 134 14 Face-priority *..............................24, 136 15 Focus area....................................22, 134 16 AF-area brackets * ............................ 129 17 Flash compensation ........................ 137 18 Exposure compensation ...................71 22 21 20 19 Flash-ready indicator .........................72 20 “K” (appears when memory remains for over 1000 exposures) .................20 21 Number of exposures remaining....20 Number of shots remaining before memory buffer fills ..............68 White balance recording indicator .........................147 Card warning indicator...........159, 188 22 Time available............................... 59, 63 23 ISO sensitivity ....................................149 24 ISO sensitivity indicator...................149 Auto ISO sensitivity indicator ........149 25 Aperture......................................... 36, 37 26 Shutter speed ............................... 35, 37 27 Metering .............................................124 28 Battery indicator * ...............................20 29 Sound settings * ................................160 30 HDR ........................................................40 31 Eye-Fi connection indicator * .........168 32 Autoexposure (AE) lock indicator ........................................... 161 33 Microphone sensitivity * .................142 34 Time elapsed................................. 59, 63 35 Recording indicator..................... 59, 63 * Available only when Detailed is selected for Display > Shooting in the setup menu (0 159). 4 A The Framing Grid A framing grid can be displayed by selecting On for Display > Grid display in the setup menu (0 159). A See also For information on adjusting monitor brightness, see page 159. s 5 The Mode Dial The camera offers a choice of the following shooting modes: s Mode dial z Motion Snapshot mode (0 53): Each time the shutter is released, the camera records a still image and about 1.6 s of movie footage. When the resulting “Motion Snapshot” is viewed on the camera, the movie will play back in slow motion over approximately 4 s, followed by the still image. u Best moment capture mode (0 45): Choose the moment to release the shutter as the scene plays back in slow motion (slow view), or let the camera choose the best shot based on composition and motion (Smart Photo Selector). C Auto mode (0 21): Let the camera pick the settings for photographs and movies. w Creative mode (0 31): For photographs in which you want to use special effects, match settings to the scene, or control shutter speed and aperture. v Advanced movie mode (0 57): Choose the shutter speed and aperture for HD movies or shoot slow-motion movies. 6 The Multi Selector The multi selector and J button are used to adjust settings and navigate the camera menus. Multi selector s Settings: & See page 10. Menu navigation: 1 Move cursor up. Select highlighted item. Settings: C View continuous shooting/self-timer menu (0 67). Settings: E View exposure compensation menu (0 71). Menu navigation: 4 Return to previous menu. Menu navigation: 2 Select highlighted item or display sub-menu. Settings: M View flash mode menu (0 72). Menu navigation: 3 Move cursor down. A The Multi Selector Items can be highlighted by rotating the multi selector as shown at right. 7 The G Button s Most shooting, playback, and setup options can be accessed from the camera menus. Press the G button to display the menu selection dialog shown below, then use the multi selector to highlight the icon for the desired menu and press J. G button Shooting menu (0 117): Adjust settings for still photography. Playback menu (0 107): Adjust playback settings. Image processing menu (0 143): Adjust white balance, ISO sensitivity, Picture Controls, and other image processing settings for photographs and movies. Setup menu (0 157): Adjust basic camera settings. 8 Movie menu (0 139): Adjust movie-recording options. History menu: Display recently used settings, or select Reset history > Yes to remove all items from the history menu. ❚❚ Using the Menus Use the multi selector (0 7) to navigate the playback, shooting, movie, image processing, setup, and history menus. Multi selector 1 Select an item. s Press 1 or 3 to highlight menu items and press 2 to view options for the highlighted item. 2 Select an option. Press 1 or 3 to highlight the desired option and press J to select. A Using the Menus The items listed may vary with camera settings. Items displayed in gray are not currently available (0 176). To exit the menus and return to shooting mode, press the shutter-release button halfway (0 23). A Choosing a Menu To display another menu, press 4 in Step 1 and then press 1 or 3 to highlight the desired icon. Press 2 to position the cursor in the highlighted menu. 9 & (Feature) s 10 Pressing 1 (&) gives access to the features listed below. Press 1 (&) to display options for the current mode, then rotate the multi selector or press 1 or 3 to highlight the desired option and press J to select. • Live image control (C auto mode; 0 25): Adjust exposure (Brightness control), contrast (Active D-Lighting), or depth of field (Background softening), or freeze or blur motion (Motion control). The effects can be previewed in the monitor. • Creative (w creative mode; 0 31): Choose from Programmed auto (P), Shutter-priority auto (S), Aperture-priority auto (A), Manual (M), Night landscape (j), Night portrait (o), Backlighting (m), Easy panorama (p), Soft (q), Miniature effect (r), and Selective color (s). • Best moment capture (u best moment capture mode; 0 45): Choose from Slow view and Smart Photo Selector (0 47) options. • Advanced movie (v advanced movie mode; 0 57): Choose Slow motion (y) for slow-motion recording (0 62) or select Programmed auto (P), Shutter-priority auto (S), Aperture-priority auto (A), or Manual (M) for high-definition (HD) movie recording. • Theme (z Motion Snapshot mode; 0 55): Choose from Beauty, Waves, Relaxation, and Tenderness. • Rating (playback mode; 0 86): Rate pictures. First Steps 1 Attach the camera strap. Attach the strap securely to the two camera eyelets. s 2 Charge the battery. Insert the battery into the charger q and plug the charger in w. An exhausted battery fully charges in about two hours. Unplug the charger and remove the battery when charging is complete. Battery charging Charging complete A The Plug Adapter Depending on the country or region of purchase, a plug adapter may be supplied with the charger. The shape of the adapter varies with the country or region of purchase. If a plug adapter is supplied, raise the wall plug and connect the plug adapter as shown at right, making sure the plug is fully inserted. Attempting to forcibly remove the plug adapter could damage the product. 11 D The Battery and Charger s Read and follow the warnings and cautions on pages x–xii and 172– 175 of this manual. Do not use the battery at ambient temperatures below 0°C (32°F) or above 40°C (104°F); failure to observe this precaution could damage the battery or impair its performance. Capacity may be reduced and charging times may increase at battery temperatures from 0°C (32°F) to 10°C (50°F) and from 45°C (113°F) to 60°C (140°F); the battery will not charge if its temperature is below 0°C (32°F) or above 60°C (140°F). Charge the battery at ambient temperatures between 5°C (41°F) and 35°C (95°F). If the CHARGE lamp flashes quickly during charging, cease use immediately and take battery and charger to your retailer or a Nikon-authorized service representative. Do not move the charger or touch the battery during charging. Failure to observe this precaution could in very rare instances result in the charger showing that charging is complete when the battery is only partially charged. Remove and reinsert the battery to begin charging again. Use the charger with compatible batteries only. Unplug when not in use. 12 3 Insert the battery and a memory card. Check to be sure the battery and card are in the correct orientation. Using the battery to keep the orange battery latch pressed to one side, slide the battery in until it latches, and then slide in the memory card until it clicks into place. s Rear 13 D Inserting and Removing Batteries and Memory Cards Always turn the camera off before inserting or removing batteries or memory cards. Note that the battery and memory cards may be hot after use; observe due caution when removing the battery and memory cards. A Formatting Memory Cards s If this is the first time the memory card will be used in the camera or if the card has been formatted in another device, select Format memory card in the setup menu and follow the on-screen instructions to format the card (0 158). Note that this permanently deletes any data the card may contain. Be sure to copy any photographs and other data you wish to keep to a computer before proceeding. A The Write Protect Switch B 16G Memory cards are equipped with a write protect switch to prevent accidental loss of data. When this switch is in the “lock” Write-protect switch position, the memory card can not be formatted and photos can not be deleted or recorded. To unlock the memory card, slide the switch to the “write” position. 14 A Removing Batteries and Memory Cards After turning the camera off, confirm that the memory card access lamp (0 3) is off and open the battery-chamber/memory card slot cover. To remove the battery, first release it by pressing the orange battery latch in the direction shown by the arrow and then remove the battery by hand. To remove a memory card, first press the card in to eject it (q); the card can then be removed by hand (w). s D Memory Cards • The camera stores pictures on SD, SDHC, and SDXC memory cards (available separately; 0 167). • Do not remove memory cards from the camera, turn the camera off, or remove or disconnect the power source during formatting or while data are being recorded, deleted, or copied to a computer. Failure to observe these precautions could result in loss of data or in damage to the camera or card. • Do not touch the card terminals with your fingers or metal objects. • Do not bend, drop, or subject to strong physical shocks. • Do not apply force to the card casing. Failure to observe this precaution could damage the card. • Do not expose to water, heat, high levels of humidity, or direct sunlight. • Do not format memory cards in a computer. 15 4 Attach a lens. Be careful to prevent dust from entering the camera when the lens or body cap is removed. The lens generally used in this manual for illustrative purposes is a 1 NIKKOR VR 10–30mm f/3.5–5.6. See page 128 for information on vibration reduction (VR) and page 200 for information on removing lenses. s Mounting mark (lens) Mounting mark Keeping marks aligned, position lens on camera, then rotate until it clicks into place. (camera) Mounting mark (lens) A Lenses with Retractable Lens Barrel Buttons Lenses with retractable lens barrel buttons can not be used when retracted. To unlock and extend the lens, keep the retractable lens barrel button pressed (q) while rotating the zoom ring (w). The lens can be retracted and the zoom ring locked by pressing the retractable lens barrel button and rotating the ring in the opposite direction. Be careful not to press the retractable lens barrel button while attaching or removing the lens. 16 5 Turn the camera on. Press the power switch to turn the camera on. The power lamp will briefly light green and the monitor will turn on. Be sure to remove the lens cap before shooting. A Turning the Camera Off s To turn the camera off, press the power switch again. The monitor will turn off. A Auto Power Off If no operations are performed for about a minute, the display will turn off and the power lamp start to flash (if desired, the delay before the display turns off automatically can be changed using the Auto power off option in the setup menu; 0 160). The camera can be reactivated by operating the shutter-release button. If no operations are performed for about three minutes after the display has turned off, the camera will turn off automatically. A Attaching and Removing Lenses Turn the camera off before attaching or removing lenses. Note that when the camera is turned off, the sensor protection barrier in the lens will close, protecting the camera image sensor. A Lenses with Retractable Lens Barrel Buttons If you are using a lens with a retractable lens barrel button (0 16), the camera will turn on automatically when the retractable lens barrel lock is released; in addition, if the view through the lens is displayed or the monitor is off, the camera will turn off when the lens barrel is locked (in the case of 1 NIKKOR VR 10–30mm f/3.5–5.6 and 1 NIKKOR VR 30–110mm f/3.8–5.6 lenses, firmware version 1.10 or later is required if locking the lens barrel is to turn the camera off when the monitor is off; for information on updating lens firmware, visit the Nikon website for your area). 17 6 Choose a language and set the clock. A language-selection dialog will be displayed the first time the camera is turned on. Use the multi selector and J button (0 7) to choose a language and set the camera clock. Photos can not be taken until you have set the time and date. s Press 1 or 3 to highlight language and press J. Press 4 or 2 to highlight time zone and press J. Press 1 or 3 to highlight date format and press J. Press 1 or 3 to highlight daylight saving time option and press J. Press 4 or 2 to select items and press 1 or 3 to change. Press J when finished. 18 Note: The camera uses a 24-hour clock. Language and clock can be changed at any time using Language (0 162) and Time zone and date (0 162) options in setup menu. A The Camera Clock The camera clock is less accurate than most watches and household clocks. Check the clock regularly against more accurate time pieces and reset as necessary. The camera clock is powered by an independent, rechargeable power source, which is charged as necessary when the main battery is installed or the camera is powered by an optional EP-5C power connector and EH-5b AC adapter (0 169). Three days of charging will power the clock for about a month. If a message warning that the clock is not set is displayed when the camera is turned on, the clock battery is exhausted and the clock has been reset. Set the clock to the correct time and date. s 19 7 Check the battery level and memory card capacity. Check the battery level and number Battery level of exposures remaining in the monitor. ❚❚ Battery Level Display s Description Battery fully charged or partially discharged; NO ICON level shown by L or K icon in detailed display (0 159). Low battery. Ready fully-charged battery or H prepare to charge battery. Cannot take pictures. Battery exhausted; Insert fully-charged shutter-release battery. disabled. Insert charged battery. Exposures remaining ❚❚ Number of Exposures Remaining The monitor shows the number of pictures that can be stored on the memory card at current settings (values over 1000 are rounded down to the nearest hundred; e.g., values between 1200 and 1299 are shown as 1.2 k). If a warning is displayed stating that there is not enough memory for additional images, insert another memory card (0 13) or delete some photos (0 85). 20 zAuto Mode Shoot photographs and movies. The camera automatically adjusts settings to suit the subject. Taking Photos in Auto Mode 1 Select auto mode. Rotate the mode dial to C. z 2 Ready the camera. Hold the camera securely with both hands, being careful not to obstruct the lens, AF-assist illuminator, or microphone. Rotate the camera as shown at lower right when taking pictures in “tall” (portrait) orientation. 3 Frame the photograph. Position your subject in the center of the frame. 21 4 Focus. Press the shutter-release button halfway to focus. If the subject is poorly lit, the flash may pop up (0 72) and the AF-assist illuminator (0 136) may light to assist the focus operation. z If the camera is able to focus, the selected Focus area focus area will be highlighted in green and a beep will sound (a beep may not sound if the subject is moving). If the camera is unable to focus, the focus area will be displayed in red. See page 131. 5 Shoot. Smoothly press the shutter-release button the rest of the way down to release the shutter and record the photograph. The memory card access lamp will light and the photograph will be displayed in the monitor for a few seconds (the photo will automatically clear from the display when the shutter-release button is pressed halfway). Do not eject the memory card or remove or disconnect the power source until the lamp has gone out and recording is complete. 22 Memory card access lamp A The Shutter-Release Button The camera has a two-stage shutter-release button. The camera focuses when the shutter-release button is pressed halfway. To take the photograph, press the shutter-release button the rest of the way down. Focus: Press halfway Shoot: Press the rest of the way down A Taking Several Photographs in Succession If Off is selected for Image review in the playback menu (0 110), you can take additional photographs without refocusing by keeping the shutter-release button pressed halfway between shots. z A Automatic Scene Selection In auto mode, the camera automatically ana- Scene icon lyzes the subject and selects the appropriate scene. The selected scene is shown in the monitor. c Portrait: Human portrait subjects. d Landscape: Landscapes and cityscapes. f Night portrait: Portrait subjects framed against dark backgrounds. e Close up: Subjects close to the camera. g Night landscape: Poorly-lit landscapes and cityscapes. Z Auto: Subjects that do not fall into the categories listed above. 23 A Using a Zoom Lens Use the zoom ring to zoom in on the subject so that it fills a larger area of the frame, or zoom out to increase the area visible in the final photograph (select longer focal lengths on the lens focal length scale to zoom in, shorter focal lengths to zoom out). Zoom in Zoom out z Zoom ring If you are using an optional lens with a power drive zoom switch, select T to zoom in and W to zoom out. The speed with which the camera zooms in and out varies with how far you slide the switch. The zoom position is shown by the zoom guide in the display. Zoom guide A Face Priority The camera detects and focuses on portrait subjects (face priority). A double yellow border will be displayed if a portrait subject is detected facing the camera (if multiple faces, up to a maximum of five, are detected, the camera will select the closest subject). Press the shutter-release button halfway to focus on the subject in the double yellow border. The border will clear from the display if the camera can no longer detect the subject (because, for example, the subject has looked away). A Available Settings For information on the options available in auto mode, see page 176. A See Also See page 160 for information on silencing the beep that sounds when the camera focuses or the shutter is released. 24 ❚❚ Live Image Control Live image controls let you preview how changes to each control will affect the final photograph. To choose a live image control for auto mode, press 1 (&), use the multi selector to highlight a control, and press J to view the effect. Rotate the multi selector to choose a setting and press J to select. To cancel live image controls, press 1 (&) again. z Active D-Lighting: Preserve details in highlights and shadows for natural contrast. Increase effect Active D-Lighting: High Active D-Lighting: Low Reduce effect Background softening: Soften background details to make your subject stand out, or bring both background and foreground into focus. Sharpen background Soften background Background sharp Background softened 25 Motion control: Suggest motion by blurring moving objects, or “freeze” motion to capture moving objects clearly. Freeze motion Blur motion z Freeze motion Blur motion Brightness control: Make pictures brighter or darker. Brighter D Live Image Control Darker Brighter Darker Continuous shooting is not available (0 67) and the built-in flash can not be used when live image control is in effect. Pressing the movierecord button cancels live image control. 26 Viewing Photographs Press K to display your most recent photograph full frame in the monitor (fullframe playback). K button z Press 4 or 2 or rotate the multi selector to view additional pictures. To end playback and return to shooting mode, press the shutterrelease button halfway. A See Also For information on toggling photo info on or off, see page 160. See page 82 for information on viewing multiple images. For information on zooming in on the center of the current image, see page 84. See page 87 for information on slide shows. 27 Deleting Pictures To delete the current picture, press O. Note that once deleted, pictures can not be recovered. 1 Display the photograph. Display the photograph you wish to delete as described on the preceding page. 2 Press O. z A confirmation dialog will be displayed. O button 3 Delete the photograph. Press O again to delete the picture and return to playback, or press K to exit without deleting the picture. A Deleting Multiple Pictures The Delete option in the playback menu (0 85) can be used to delete all or selected pictures. 28 Recording Movies in Auto Mode In auto mode, the movie-record button can be used to shoot HD movies with sound at an aspect ratio of 16 : 9 (the movie crop is shown in the display). Press the movie-record button to start and stop recording. Movie-record button A Taking Photographs During Recording Photographs can be taken at any time during recording by pressing the shutterrelease button all the way down. Movie recording is not interrupted. z A See Also See page 65 for information on viewing movies. 29 z 30 6Creative Mode Choose creative mode when to take photos using special effects, match settings to the scene, or control shutter speed and aperture. Choosing a Creative Mode 1 Select creative mode. Rotate the mode dial to w. 6 2 Choose a scene. Press 1 (&) and highlight a scene using the multi selector (0 32). Press J to select the highlighted scene. Your selection is indicated by an icon in the display. 31 Choosing a Scene Creative mode offers a choice of the following scenes: Option 6 32 Description The camera sets shutter speed and aperture for optimal exposure (0 34). Recommended for snapshots Programmed auto (P) and in other situations in which there is little time to adjust camera settings. You choose the shutter speed; the camera selects an Shutter-priority auto aperture for best results (0 35). Use to freeze or blur (S) motion. You choose the aperture; the camera selects a shutAperture-priority ter speed for best results (0 36). Use to blur the auto (A) background or bring both foreground and background into focus. You control both shutter speed and aperture (0 37). Manual (M) Choose a shutter speed of “Bulb” for long time-exposures (0 38). Each time the shutter-release button is fully pressed, the camera takes a series of shots and combines them to capture low lighting in night scenes; during processing, a message is displayed and no pictures can be taken. The flash does not fire and the edges of Night landscape (j) photos are cropped out. Note that the desired results may not be obtained if the camera or subject moves during shooting; if the camera is unable to combine the images, a warning will be displayed and only one picture will be taken. Option Description Each time the shutter-release button is fully pressed, the camera takes a series of shots, some with the flash and some without, and combines them to capture background lighting in portraits taken at night or under low light; during processing, a message is displayed and no pictures can be taken. Note that Night portrait (o) the edges of photos are cropped out and that the desired results may not be obtained if the camera or subject moves during shooting; if the camera is unable to combine the images, a warning will be displayed and the camera will take a single picture using the flash. Backlighting (m) Photograph backlit subjects (0 40). Shoot panoramas for later viewing on the camera Easy panorama (p) (0 41). Shoot photographs with a soft filter effect. To choose the amount of softening, press J when the view Soft (q) through the lens is displayed, highlight an option using the multi selector, and press J to select. The top and bottom of each photo is blurred so that the subject appears to have been a diorama photoMiniature effect (r) graphed at short range. Works best when shooting from a high vantage point. Take photos in which only a selected hue appears in color. To choose the hue, Selective color (s) press J when the view through the lens is displayed and use the multi selector and J button. 6 A Available Settings For information on the options available in creative mode, see page 178. 33 Taking Photos in P, S, A, and M Modes P, S, A, and M modes offer varying degrees of control over shutter speed and aperture. Choose a mode and adjust settings according to your creative intent. P Programmed Auto 6 In this mode, the camera automatically adjusts shutter speed and aperture for optimal exposure in most situations. This mode is recommended for snapshots and other situations in which you want to leave the camera in charge of shutter speed and aperture. ❚❚ Choosing a Combination of Shutter Speed and Aperture Although the shutter speed and aperture chosen by the camera will produce optimal results, you can also choose from other combinations that will produce the same exposure (“flexible program”). Rotate the multi selector clockwise for large apertures (low f-numbers) that blur background details or fast shutter speeds that “freeze” motion. Rotate the multi selector counterclockwise for small apertures (high f-numbers) that increase depth of field or slow shutter speeds that blur motion. U is displayed while flexible program is in effect. A Restoring Default Shutter Speed and Aperture Settings To restore default shutter speed and aperture settings, rotate the multi selector until U is no longer displayed or turn the camera off. The default shutter speed and aperture is automatically restored when the camera enters standby mode. 34 S Shutter-Priority Auto In shutter-priority auto, you choose the shutter speed while the camera automatically selects the aperture that will produce the optimal exposure. Use slow shutter speeds to suggest motion by blurring moving subjects, fast shutter speeds to “freeze” motion. Fast shutter speed (1/1600 s) Slow shutter speed (1 s) 6 ❚❚ Choosing a Shutter Speed Rotate the multi selector to choose from shutter speeds between 30 s and 1/16,000 s. Rotate the selector clockwise for faster shutter speeds, counterclockwise for slower shutter speeds. A Continuous Shooting The selected shutter speed may change when continuous shooting (0 67) is in effect. 35 A Aperture-Priority Auto In aperture-priority auto, you choose the aperture while the camera automatically selects the shutter speed that will produce the optimal exposure. Large apertures (low f-numbers) reduce depth of field, blurring objects behind and in front of the main subject. Small apertures (high f-numbers) increase depth of field, bringing out details in the background and foreground. Short field depths are generally used in portraits to blur background details, long field depths in landscape photographs to bring the foreground and background into focus. 6 Large aperture (f/5.6) Small aperture (f/16) ❚❚ Choosing an Aperture Rotate the multi selector counterclockwise for larger apertures (lower f-numbers), clockwise for smaller apertures (higher f-numbers). The minimum and maximum values depend on the lens currently in use. 36 M Manual In manual mode, you control both shutter speed and aperture. ❚❚ Choosing Shutter Speed and Aperture Adjust shutter speed and aperture with reference to the exposure indicator (see below). Press 2 to highlight shutter speed or aperture and rotate the multi selector to choose a value, then repeat for the remaining item. Rotate the selector clockwise for faster shutter speeds or smaller apertures (higher f-numbers), counterclockwise for slower shutter Shutter speed speeds and larger apertures (lower fnumbers). Shutter speeds can be set to values as fast as 1/16,000 s or as slow as 30 s, or to “Bulb” to hold the shutter open indefinitely for a long time-exposure (0 38). Aperture can be set to values Press 2 to highlight aperture. between the minimum and maximum for the lens. Aperture 6 Press 2 to highlight shutter speed. A Continuous Shooting The selected shutter speed may change when continuous shooting (0 67) is in effect. 37 A The Exposure Indicator When shutter speeds other than “Bulb” are selected, the exposure indicator shows whether the photograph would be under- or overexposed at current settings. Optimal exposure 6 Underexposed by 1/3 EV Overexposed by over 2 EV ❚❚ Long Time-Exposures (M Mode Only) Select a shutter speed of “Bulb” for long time-exposures of moving lights, the stars, night scenery, or fireworks. The shutter remains open while the shutterrelease button is held down. To prevent blur, use a tripod. 1 Ready the camera. Mount the camera on a tripod or place it on a stable, level surface. To prevent loss of power before the exposure is complete, use a fully charged EN-EL20 battery or an optional EH-5b AC adapter and EP-5C power connector. Note that noise (bright spots, randomly-spaced bright pixels, or fog) may be present in long exposures; before shooting, choose On for Long exposure NR in the shooting menu (0 128). 38 2 Choose a shutter speed of “Bulb”. Press 2 to highlight shutter speed and rotate the multi selector counterclockwise to select “Bulb”. 3 Open the shutter. 6 After focusing, press the shutter-release button all the way down. Keep the shutter-release button pressed until the exposure is complete. 4 Close the shutter. Take your finger off the shutter-release button. Shooting ends automatically after about two minutes. Note that some time may be required to record long exposures. 39 Backlighting The method used to capture details in shaded areas of back-lit subjects depends on the option selected for HDR in the shooting menu (0 117). 6 Details in highlights and shadows are preserved using HDR (high dynamic range); Z appears in the display. Each time the shutterrelease button is fully pressed, the camera takes two shots in quick succession and combines them to preserve details in highlights and shadows in high-contrast scenes; the built-in flash does not fire. While the shots are combined, a message will be displayed and the shutter release will be disabled. The final photograph will be On displayed when processing is complete. + First exposure Second exposure Combined HDR (darker) (brighter) image The flash fires to “fill in” (illuminate) shadows in back-lit subjects. Off Only one shot is taken when the shutter-release button is fully pressed, and the flash fires with each shot. D Framing HDR Photographs The edges of the image will be cropped out. The desired results may not be achieved if the camera or subject moves during shooting. Depending on the scene, shading may be uneven and shadows may appear around bright objects or halos around dark objects. If the camera is unable to successfully combine the two images, a single image will be recorded at normal exposure and Active D-Lighting (0 127) will be applied. 40 Easy Panorama Follow the steps below to shoot panoramas. During shooting, the camera focuses using auto-area AF (0 134); face detection (0 24) is not available. Exposure compensation (0 71) can be used, but the built-in flash will not fire. 1 Set focus and exposure. Frame the start of the panorama and press the shutter-release button halfway. Guides will appear in the display. 6 2 Start shooting. Press the shutter-release button the rest of the way down and then lift your finger from the button. a, c, d, and b icons will appear in the display to indicate the possible pan directions. 3 Pan the camera. Slowly pan the camera up, down, left, Progress indicator or right as shown below. Shooting will start when the camera detects the pan direction and a progress indicator will appear in the display. Shooting ends automatically when the end of the panorama is reached. 41 An example of how to pan the camera is shown below. Without changing your position, pan the camera in a steady curve either horizontally or vertically. Time the pan according to the option selected for Image size in the shooting menu: about 15 seconds are needed to complete the pan when A Normal panorama is selected, about 30 seconds when B Wide panorama is selected. 6 A Panoramas High-distortion wide-angle lenses may fail to produce the desired results. An error message will be displayed if the camera is panned too quickly or unsteadily. The completed panorama will be slightly smaller than the area visible in the display during shooting. No panorama will be recorded if shooting ends before the halfway point; if shooting ends after the halfway point but before the panorama is complete, the unrecorded portion will be shown in gray. 42 ❚❚ Viewing Panoramas Panoramas can be viewed by pressing 3 when a panorama is displayed full frame (0 27). The start of the panorama will be displayed with the smallest dimension filling the display and the camera will then scroll through the picture in the original pan direction. Navigation Guide window 6 The following operations can be performed: To Use Pause Play Advance/ rewind Return to full-frame playback Description Pause playback. J Resume playback when the panorama is paused or during rewind/advance. Press 4 to rewind, 2 to advance. If playback is paused, the panorama rewinds or advances a segment at a time; keep the button pressed for continuous rewind or advance. /K Press 1 or K to exit to full-frame playback. 43 Recording Movies in Creative Mode 6 In creative mode, the movie-record button can be used to shoot HD movies with sound at an aspect ratio of 16 : 9 (the corners of the movie crop are shown in the display). Press the movie-record button to start and stop recording. Note that regardless of the mode selected, movies are recorded using programmed auto exposure; to adjust exposure when shooting movies, select advanced movie mode (0 57). Movie-record button Movie crop A Taking Photographs During Recording Photographs can be taken at any time during recording by pressing the shutter-release button all the way down. Movie recording is not interrupted. A See Also See page 65 for information on viewing movies. 44 bBest Moment Capture Mode This mode is ideal for fast-changing, hard-to-capture subjects. Choose when to release the shutter as the scene plays back in slow motion (slow view), or let the camera choose the best shot based on composition and motion (Smart Photo Selector; 0 47). Slow View In this mode, the camera captures a short sequence of still images and plays them back in slow motion so that you can choose the precise moment for a photograph. While the shutterrelease button is pressed halfway, the camera records up to 20 frames over about 1.3 s and plays them back in a continuous slow-motion loop. When the frame you want to keep is displayed, press the shutter-release button the rest of the way down to record the current frame and discard the remaining images. To use slow view, select Slow view from the 1 (&) button menu in best moment capture mode. b 1 Select best moment capture mode. Rotate the mode dial to u. If Smart Photo Selector is selected, choose Slow view. 45 2 Frame the photograph. Compose the photograph with your subject in the center of the frame. 3 Press the shutter-release button halfway. The camera will focus (0 22) and then, over a span of about 1.3 s, record 20 frames to a temporary memory buffer. b 4 View the buffer contents. Keep the shutter-release button Progress indicator pressed halfway to play the frames in the buffer back in a continuous loop about 6.5 s long. The position of the current frame is shown by a progress indicator. 5 Record the desired frame. Press the shutter-release button all the way down to record the current frame and discard the remaining images; the selected frame will be displayed for a few seconds when recording is complete. To exit without recording a photograph, release the button without pressing it all the way down. A Viewing and Deleting Photos Taken in Slow View Photos taken in slow view can be viewed as described on page 27 or deleted as described on page 28. 46 Smart Photo Selector Choose Smart Photo Selector mode to let the camera help you take photos that capture a fleeting expression on the face of a portrait subject or other hard-to-time shots such as group photos in party scenes. Each time the shutter is released, the camera automatically selects the best shot and a number of best shot candidates based on composition and motion. To use the Smart Photo Selector, select Smart Photo Selector from the 1 (&) button menu in best moment capture mode. b 1 Select best moment capture mode. Rotate the mode dial to u. If Slow view is selected, choose Smart Photo Selector. 47 2 Frame the photograph. Compose the photograph with your subject in the center of the frame. 3 Begin buffering photographs. b Press the shutter-release button halfway to focus (0 22). An icon will be displayed as the camera begins recording images to the memory buffer. The camera continuously adjusts focus to account for changes in the distance to the subject while the shutter-release button is pressed halfway. 4 Shoot. Smoothly press the shutter-release button the rest of the way down. The camera will compare shots recorded to the buffer both before and after the shutter-release button was pressed all the way down, and select five to copy to the memory card. Note that some time may be required. The best picture is displayed in the monitor when recording is complete. 48 A Buffering Buffering begins when the shutter-release button is pressed halfway and ends after about 90 seconds or when the shutter-release button is pressed all the way down. Shutter-release button pressed halfway to focus Shutter-release button pressed all the way down Shooting ends Buffering D Smart Photo Selector Files Do not delete the “NCSPSLST.LST” file from the “NCFL” folder on the memory card or change the file names of images taken with the Smart Photo Selector. The camera will no longer recognize the affected files as Smart Photo Selector images and will instead handle them as independent photographs. b A Available Settings For information on the options available in best moment capture mode, see page 176. A Best Moment Capture Mode The camera automatically chooses a scene mode appropriate to the subject. Movies can not be recorded, and pressing the movie-record button has no effect. The flash can not be used. A See Also Use the Number of shots saved option in the shooting menu to choose the number of shots selected by the Smart Photo Selector (0 123). 49 Viewing Photos Taken with the Smart Photo Selector b Press K and use the multi selector to display photographs taken with the Smart Photo Selector (0 27; pictures taken with the Smart Photo Selector are indicated by a y icon). Of the photographs recorded by the Smart Photo Selector, only the best shot will be displayed (when you press the multi selector right to view the next picture, the camera will skip over the best shot candidates, with the result that the next picture displayed will not have a file number that immediately follows that of the current picture). To end playback and return to shooting mode, press the shutter-release button halfway. Choosing the Best Shot When a photograph taken with the Smart Photo Selector is displayed, you can choose the best shot by pressing 3. Press 4 or 2 to view the other pictures in the sequence and press J to select the current picture as the best shot. To return to normal playback, press D. 50 K button Deleting Pictures Pressing O when a picture taken with the Smart Photo Selector is selected displays a confirmation dialog; press O again to delete the best shot and the best shot candidates, or press K to exit without deleting the pictures. Note that once deleted, pictures can not be recovered. O button b A Deleting Individual Photographs Pressing the O button in the best shot selection dialog displays the following options; highlight an option using the multi selector and press J to select. • This image: Delete the current photo (note that the picture currently selected as the best shot can not be deleted). • All except best shot: Delete the best shot candidates, but not picture currently selected as the best shot. A confirmation dialog will be displayed; to delete the selected image or images, highlight Yes and press J. 51 b 52 9Motion Snapshot Mode Record brief movie vignettes with your photographs. Each time the shutter is released, the camera records a still image and about 1.6 s of movie footage. When the resulting “Motion Snapshot” is viewed on the camera, the movie will play back in slow motion over approximately 4 s, followed by the still image; playback is accompanied by a background track about 10 s long. 9 Shooting in Motion Snapshot Mode 1 Select Motion Snapshot mode. Rotate the mode dial to z. 2 Frame the picture. Compose the photograph with your subject in the center of the frame. A Available Settings For information on the options available in Motion Snapshot mode, see page 176. 53 3 Begin buffering. Press the shutter-release button halfway to focus (0 22). An icon will be displayed as the camera begins recording footage to the memory buffer. 4 Shoot. 9 Smoothly press the shutter-release button the rest of the way down. The camera will record a photograph, together with about 1.6 s of movie footage beginning before and ending after the time the shutter-release button was pressed all the way down. Note that some time may be required. When recording is complete, the photograph will be displayed for a few seconds. A Buffering Buffering begins when the shutter-release button is pressed halfway and ends after about 90 seconds or when the shutter-release button is pressed all the way down. Shutter-release button pressed halfway to focus Shutter-release button pressed all the way down Buffering 54 Shooting ends ❚❚ Choosing a Theme To choose the background music for the movie, press 1 (&) and use the multi selector and J button to select from Beauty, Waves, Relaxation, and Tenderness. To play the background music for the highlighted theme, press 2 and rotate the multi selector to adjust volume. A Motion Snapshot Mode Live audio is not recorded. Movies can not be recorded using the movie-record button and the flash can not be used. 9 A See Also See page 123 for information on choosing what portions of the buffer are included in the movie footage. For information on saving Motion Snapshots in a format that can be viewed in most movie playback software, see page 124. 55 Viewing Motion Snapshots Press K and use the multi selector to display a Motion Snapshot (0 27; Motion Snapshots are indicated by a z icon). Pressing 3 when a Motion Snapshot is displayed plays back the movie portion in slow motion over a period of about 4 s, followed by the photo; the background track plays for about 10 s (to choose a new background track, use the Change theme option in the playback menu; 0 115). To end playback and return to shooting mode, press the shutter-release button halfway. 9 Deleting Motion Snapshots To delete the current Motion Snapshot, press O. A confirmation dialog will be displayed; press O again to delete the photo and movie and return to playback, or press K to exit without deleting the file. Note that once deleted, Motion Snapshots can not be recovered. 56 K button O button yRecording and Viewing Movies The camera can record high-definition (HD) movies with an aspect ratio of 16 : 9 and slow-motion movies with an aspect ratio of 8 : 3. Movies can be recorded by pressing the movie-record button in the following shooting modes: Mode Movie type C Auto mode (0 29) w Creative mode (0 44) Programmed auto (P) HD (16 : 9) Shutterpriority auto (S) v Advanced Aperturepriority auto movie mode (0 58, (A) 62) Manual (M) Slow Slow motion motion (y) (8 : 3) Movie-record button Description The camera automatically optimizes settings for the current subject or scene. Shoot movies. Regardless of the scene selected with the camera, movies are recorded in mode P; shutter speed and aperture are controlled by the camera. Shutter speed and aperture are controlled by the camera. You choose the shutter speed; the camera automatically adjusts aperture for optimal exposure (0 35). You choose the aperture; the camera automatically adjusts shutter speed for optimal exposure (0 36). You choose the shutter speed and aperture (0 37). Record silent slow-motion movies. Movies are recorded at 400 fps and play back at about 30 fps (0 62). y A Available Settings For information on the options available in advanced movie mode, see page 176. 57 Recording HD Movies Record movies with sound at an aspect ratio of 16 : 9. 1 Choose a shooting mode. Rotate the mode dial to choose a shooting mode. Note that best moment capture and Motion Snapshot modes do not support HD movie recording. For greater control of exposure, select v (advanced movie mode), press 1 (&), and choose from P Programmed auto, S Shutter-priority auto, A Aperture-priority auto, and M Manual (0 57). y 2 Frame the opening shot. Frame the opening shot with your subject in the center of the display. A The 0 Icon A 0 icon indicates that movies can not be recorded. 58 3 Start recording. Press the movie-record button to begin recording. A recording indicator, the time elapsed, and the time available are displayed while recording is in progress. A Audio Recording Movie-record button Be careful not to cover the microphone and note that the built-in microphone Recording indicator/ may record sounds made by the camera Time elapsed or lens. By default, the camera focuses continuously; to avoid recording focus noise, select Single AF for Focus mode in the movie menu (0 129). The Movie sound options item in the movie menu offers microphone sensitivity and wind noise options (0 142). Time available 4 End recording. Press the movie-record button again to end recording. Recording will end automatically when the maximum length is reached (0 141), the memory card is full, another mode is selected, the lens is removed, or the camera becomes hot (0 xvi). y Movie-record button A Maximum Length At default settings, HD movies can be up to 4 GB in size and 20 minutes in length (for more information, see page 141); note that depending on memory card write speed, shooting may end before this length is reached (0 167). 59 A The Movie Crop The movie crop is shown in the monitor. HD crop (16 : 9) A Focus Lock Slow-motion movie crop (8 : 3) If Single AF is selected for Focus mode in the movie menu for advanced movie mode, focus will lock while the shutter-release button is pressed halfway (0 135). y 60 ❚❚ Taking Photographs During HD Movie Recording Press the shutter-release button all the way down to take a photograph without interrupting HD movie recording. Photographs taken during movie recording have an aspect ratio of 3 : 2. A Taking Photographs During Movie Recording Up to 20 photographs can be taken with each movie shot. Please note that photographs can not be taken with slow-motion movies. D Recording Movies Flicker, banding, or distortion may be visible in the display and in the final movie under fluorescent, mercury vapor, or sodium lamps or if the camera is panned horizontally or an object moves at high speed through frame (flicker and banding can be reduced in HD movies by choosing a Flicker reduction option that matches the frequency of the local AC power supply as described on page 161, but note that the slowest shutter speed available is 1/100 s at 50 Hz, 1/60 s at 60 Hz; flicker reduction is not available with slow-motion movies). Bright light sources may leave after-images when the camera is panned. Jagged edges, color fringing, moiré, and bright spots may also appear. When recording movies, avoid pointing the camera at the sun or other strong light sources. Failure to observe this precaution could result in damage to the camera’s internal circuitry. y A See Also Frame size and frame rate options are described on page 141. 61 Recording Slow-Motion Movies Silent slow-motion movies with an aspect ratio of 8 : 3 can be recorded by selecting y Slow motion from the 1 (&) button menu in advanced movie mode. Slow-motion movies are recorded at 400 fps and play back at about 30 fps. 1 Select advanced movie mode. Rotate the mode dial to v. If an option other than y Slow motion is selected, choose y Slow motion. y 2 Frame the opening shot. Frame the opening shot with your subject in the center of the display. 62 3 Focus. Focus area 4 Start recording. Press the movie-record button to begin recording. A recording indicator, the time elapsed, and the time available are displayed while recording is in progress. The camera focuses on the subject at the center of the display; face detection (0 24) is not Movie-record button available and focus and exposure can Recording indicator/ not be adjusted. Time elapsed y Time available 63 5 End recording. Press the movie-record button again to end recording. Recording will end automatically when the maximum length is reached, the memory card is full, another mode is selected, the lens is removed, or the camera becomes hot (0 xvi). A Maximum Length Movie-record button Up to 3 seconds of footage can be recorded; note that depending on memory card write speed, shooting may end before this length is reached (0 167). A See Also Frame rate options are described on page 140. y 64 Viewing Movies Movies are indicated by a 1 icon in full-frame playback (0 27). Press 3 to start playback. Movie playback indicator/ Current position/total length 1 icon/Length Guide Volume The following operations can be performed: To Use Pause Play Advance/ rewind Adjust volume Return to full-frame playback Description Pause playback. J y Resume playback when the movie is paused or during rewind/advance. Press 4 to rewind, 2 to advance. Speed increases with each press, from 2× to 4× to 8× to 16×. If playback is paused, the movie rewinds or advances one frame at a time; keep the button pressed for continuous rewind or advance. Rotate the multi selector to adjust volume. /K Press 1 or K to exit to full-frame playback. 65 Deleting Movies To delete the current movie, press O. A confirmation dialog will be displayed; press O again to delete the movie and return to playback, or press K to exit without deleting the movie. Note that once deleted, movies can not be recovered. A See Also See page 114 for information on trimming unwanted footage from movies. y 66 O button tMore on Photography Single-Frame, Continuous, and Self-Timer Modes Pressing 4 (C) on the multi selector displays a choice of shutterrelease modes for still photography: 8 5 fps 15 fps 30 fps 60 fps E 10 s E5s E2s The camera takes pictures one at a time. Continuous: The camera records photographs at about 5, 15, 30, or 60 fps while the shutter-release button is pressed all the way down. The shutter is released about 10, 5, or 2 seconds after the shutter-release button is pressed all the way down. Choose 10 s or 5 s for self-portraits, 2 s to reduce camera shake. Continuous Mode To take pictures in continuous mode: 1 Display release mode options. t Press 4 (C) to display release mode options. 2 Select a frame rate. Highlight 5 fps, 15 fps, 30 fps, or 60 fps and press J. 3 Compose the shot and start shooting. The camera takes pictures while the shutter-release button is held all the way down. 67 D Continuous Mode The maximum number of shots that can be taken in a single burst varies with the release mode. At frame rates of 30 and 60 fps, the maximum number of shots that can be taken in a single burst is 20. The built-in flash can be used when 5 fps is selected, but only one picture will be taken each time the shutter-release button is pressed; at settings of 15, 30, and 60 fps, the built-in flash will not fire. While photographs are being recorded to the memory card, the memory card access lamp will light. Depending on shooting conditions and memory card write speed, recording may take some time. If the battery is exhausted before all photographs are recorded, the shutter release will be disabled and the remaining images transferred to the memory card. Continuous shooting is not available in creative modes other than P, S, A, or M, in best moment capture, advanced movie, or Motion Snapshot mode, or when live image control is used in auto mode (0 25). A Buffer Size t 68 The camera is equipped with a memory buffer for temporary storage, allowing shooting to continue while photographs are being saved to the memory card. Note that the frame rate will drop or shooting will pause when the buffer is full. The approximate number of images that can be stored in the memory buffer at current settings is displayed while the shutterrelease button is pressed halfway (this number is an approximation only and varies with shooting conditions; 0 181). The illustration shows the display when space remains in the buffer for about 41 pictures. Self-Timer Modes The self-timer can be used to reduce camera shake or for selfportraits. 1 Display release mode options. Press 4 (C) to display release mode options. 2 Select the desired self-timer option. Use the multi selector to highlight E 10 s, E 5 s, or E 2 s and press J. 3 Mount the camera on a tripod. Mount the camera on a tripod or place the camera on a stable, level surface. 4 Frame the photograph and shoot. t Press the shutter-release button halfway to focus, and then press the button the rest of the way down. The selftimer lamp will start to flash and a beep will begin to sound. Two seconds before the photo is taken, the lamp will stop flashing and the beeping will become more rapid. 69 Note that the timer may not start or a photograph may not be taken if the camera is unable to focus or in other situations in which the shutter can not be released. Turning the camera off cancels the self-timer. A Movie Mode In self-timer mode, start and stop the timer by pressing the movierecord button instead of the shutter-release button. A Raising the Flash In P, S, A, or M mode, press the flash pop-up button to raise the flash before shooting. Shooting will be interrupted if the flash is raised while the timer is counting down. A See Also For information on controlling the beeps that sound when the selftimer is used, see page 160. t 70 Exposure Compensation Exposure compensation is used to alter exposure from the value suggested by the camera, making pictures brighter or darker. –1 EV No compensation +1 EV 1 Display exposure compensation options. Press 2 (E) to display exposure compensation options. 2 Choose a value. t Use the multi selector to choose from values between –3 EV (underexposure) and +3 EV (overexposure) in increments of 1/3 EV. In general, positive values make the image brighter while negative values make it darker. Normal exposure can be restored by setting exposure compensation to ±0. In modes P, S, and A, exposure compensation is not reset when the camera is turned off. A Exposure Compensation Exposure compensation is most effective when used with centerweighted or spot metering (0 124). A The Built-in Flash When used with the built-in flash, exposure compensation affects both background exposure and flash level. 71 The Built-in Flash Use the built-in flash for additional lighting when the subject is poorly lit or to “fill-in” (illuminate) back-lit subjects. The camera offers a choice of flash modes; choose a mode according to lighting conditions and your creative intent. The built-in flash is available in the following shooting modes: ❚❚ Auto Pop-up Modes In C (auto) and in night portrait, backlighting, soft, miniature effect, and selective color w (creative) modes, the flash will pop-up automatically and fire when required. 1 Choose a flash mode (0 73). 2 Take pictures. t The flash will pop up and fire as required. In night portrait (0 33) and (if HDR i s o f f ) in ba ck li g ht in g (0 40) mode, the flash will pop up and fire with every shot. ❚❚ Manual Pop-up Modes When P, S, A, or M is selected in w (creative) mode, the flash must be raised manually. The flash will not fire if it is not raised. 1 Raise the flash. Press the flash pop-up button to raise the flash. 2 Choose a flash mode (0 73). 3 Take pictures. 72 The flash will fire with every shot. To Flash pop-up button disable the flash, press it gently downward until it latches (0 75). Choosing a Flash Mode The options available vary with the shooting mode. Auto, Soft (q), Miniature effect (r), Selective color (s) o Auto n Auto+red-eye reduction s Off 1 Night portrait (o), Backlighting (m) N Fill flash NY Red-eye reduction N NY Nq s P, A N NY Fill flash Red-eye reduction Red-eye reduction + NYp slow sync Np Fill flash + slow sync Nr Rear curtain + slow sync s Off 2 S, M Fill flash Red-eye reduction Rear-curtain sync Off 2 1 Select to disable built-in flash. 2 Available only when built-in flash is raised. t To choose a flash mode: 1 Display flash modes. Press 3 (N) on the multi selector to display a list of the available flash modes. 2 Select a flash mode. Use the multi selector to highlight a flash mode and press J to select. Charging begins when the flash is raised; once charging is complete, a flash-ready indicator (N) will be displayed when the shutter-release button is pressed halfway. 73 D Raising the Flash When using the flash, be sure it is fully raised as shown at right. Do not touch the flash during shooting. A Flash Modes t The flash modes listed on the previous page may combine one or more of the following settings, as shown by the flash mode icon: • AUTO (auto flash): When lighting is poor or subject is backlit, flash pops up automatically when shutter-release button is pressed halfway and fires as required. • Y (red-eye reduction): Use for portraits. Red-eye reduction lamp lights before flash fires, reducing “red-eye.” • s (off): Flash does not fire even when lighting is poor or subject is backlit. • SLOW (slow sync): Shutter speed slows automatically to capture background lighting at night or under low light. Use to include background lighting in portraits. • REAR (rear-curtain sync): Flash fires just before shutter closes, creating a stream of light behind moving light sources (below at right). If this icon is not displayed, flash will fire as the shutter opens (front-curtain sync; the effect this produces with moving light sources is shown below at left). Front-curtain sync 74 Rear-curtain sync A Lowering the Built-in Flash To save power when the flash is not in use, press it gently downward until the latch clicks into place. Do not use force. Failure to observe this precaution could result in product malfunction. A Using the Built-in Flash The built-in flash can not be used with live image control (0 25) and will not fire during continuous shooting at frame advance rates faster than 5 fps (0 67) or when On is selected for HDR in the shooting menu (0 40). If the flash is fired multiple times in quick succession, the flash and shutter may be temporarily disabled to protect the flash. Shooting can be resumed after a brief pause. Objects close to the camera may be overexposed in photographs taken with the flash at high ISO sensitivities. To avoid vignetting, remove lens hoods and shoot at ranges of at least 0.6 m (2 ft). Some lenses may cause vignetting at greater distances or obstruct the red-eye reduction lamp, interfering with red-eye reduction. The following illustrations show the effect of vignetting caused by shadows cast by the lens when the built-in flash is used. Shadow t Shadow A Aperture, Sensitivity, and Flash Range Flash range varies with sensitivity (ISO equivalency) and aperture. With the standard zoom lens at maximum aperture and ISO sensitivity set to ISO 160 to 6400, the range is approximately 0.6 m–7.0 m (2 ft–23 ft) when the lens is zoomed all the way out, 0.6 m–4.2 m (2 ft–13.8 ft) at maximum zoom. A See Also See page 137 for information on adjusting flash level. 75 The WU-1b Wireless Mobile Adapter Attach an optional WU-1b wireless mobile adapter to the camera USB connector to copy images to, or control the camera from, smartphone or tablet devices running the Wireless Mobile Utility app. 1 Connect the WU-1b. After removing the rubber cap from the WU-1b USB connector, turn the camera off and attach the adapter to the camera USB connector. 2 Activate the adapter. t Select Wireless mobile adapter in the setup menu (0 157). A confirmation dialog will be displayed; select Yes to activate the WU-1b, allowing wireless connection to smart devices, or No to deactivate the WU-1b and prevent wireless connection. D Using the WU-1b for the First Time After connecting the WU-1b, you will need to adjust smart device wireless settings. See the WU-1b manual for more information. 3 Launch the Wireless Mobile Utility. Launch the Wireless Mobile Utility on the smart device. 76 4 Take pictures remotely. Once a wireless connection is established, the smart device will display the view through the camera lens; the camera will display a message stating that a wireless connection is active. D Wireless Networks Camera settings can not be adjusted while the camera is connected to a wireless network. To end the connection, press the G button. A The Wireless Mobile Utility The Wireless Mobile Utility is available from Google Play and the App Store. System requirements and Information on installation, wireless connections and use may be found in the Wireless Mobile Utility manual available in pdf format from the following URL: http://nikonimglib.com/ManDL/WMAU/ t 77 t 78 IMore on Playback Photo Information Photo information is superimposed on images displayed in fullframe playback (0 27). The information displayed can be selected using the Display > Playback option in the setup menu (0 160). ❚❚ Basic Info 1 2 1 12 2 3 3 11 13 10 9 10 4 9 8 7 6 5 Still images 1 Shooting mode 2 Protect status.....................................110 3 Frame number/total number of images 4 Image quality.....................................120 Frame rate..................................140, 141 5 Image size...........................................120 Frame size..................................140, 141 4 8 7 6 5 Movies 6 File name ............................................122 7 Time of recording ...................... 18, 162 8 Date of recording....................... 18, 162 9 Battery indicator .................................20 10 Rating .................................................... 86 11 Movie length........................................ 65 12 Audio recording indicator...............142 13 On-screen guide (for movies) ..........65 I 79 ❚❚ Detailed Photo Information 1 2 3 4 28 5 6 7 8 9 15 14 13 12 11 10 27 16 17 18 26 25 24 22 21 23 20 19 Still images 1 2 29 4 5 3 6 13 26 16 27 12 11 25 24 23 22 21 20 19 Movies I 80 1 Shooting mode 2 Frame number/total number of images 3 Protect status.....................................110 4 Camera name 5 Retouch indicator ...........111, 112, 113 Movie edit indicator.........................114 6 Histogram showing distribution of tones in image ................................... 81 7 ISO sensitivity ....................................149 8 Focal length .......................................197 9 Flash mode........................................... 73 10 Flash compensation.........................137 11 Exposure compensation ................... 71 12 Metering .............................................124 13 Creative mode .............................. 31, 32 Best moment capture selection.... 45, 47 Advanced movie selection ........ 57, 62 Exposure mode .................................119 14 Shutter speed ............................... 35, 37 15 Aperture......................................... 36, 37 16 Picture Control ..................................150 17 Active D-Lighting indicator............127 18 HDR indicator ...................................... 40 19 Image quality.....................................120 Frame rate .................................140, 141 20 Image size...........................................120 Frame size..................................140, 141 21 File name ............................................122 22 Time of recording ...................... 18, 162 23 Date of recording....................... 18, 162 24 Battery indicator ................................. 20 25 White balance....................................144 White balance fine-tuning .............145 26 Color space.........................................126 27 Rating .................................................... 86 28 Auto distortion control....................125 29 Audio recording indicator ..............142 A Histograms (0 80) Camera histograms are intended only as a guide and may differ from those in imaging applications. Sample histograms are shown below: • If brightness varies evenly across the image, the distribution of tones will be relatively even. • If the image is dark, tone distribution will be shifted to the left. • If the image is bright, tone distribution will be shifted to the right. Exposure compensation shifts the distribution of tones to the right when raised, to the left when lowered. Histograms can give you a rough idea of overall exposure when bright ambient lighting makes it difficult to see the display in the monitor. I 81 Thumbnail Playback To view pictures in “contact sheets” of 4, 9, or 72 images, press J when a picture is displayed full frame and rotate the multi selector counterclockwise. The following operations can be performed: To I Use Display more images Description Rotate the multi selector counterclockwise to increase the number of images displayed from 1 to 4, from 4 to 9, or from 9 to 72. To view images taken on selected dates (0 83), rotate the selector counterclockwise when 72 images are displayed. Display fewer images Rotate the multi selector clockwise to reduce the number of images displayed from 72 to 9 or 9 to 4. To view the highlighted image full frame, rotate the selector clockwise when 4 images are displayed. Use the multi selector to highlight images. You can delete (0 85) the highlighted image or zoom in for a closer look (0 84). Highlight images View highlighted image Delete highlighted image 82 J Press J to view the highlighted image full frame. O See page 85. Calendar Playback To view pictures taken on a selected date, rotate the multi selector counterclockwise when 72 pictures are displayed (0 82). The following operations can be performed: To Use Display calendar To return to the 72-image display, rotate the multi selector clockwise when the calendar is displayed. Exit to thumbnail playback Use multi selector to highlight date in calendar display. Highlight date View pictures taken on highlighted date Delete pictures taken on highlighted date Description To view the calendar, rotate the multi selector counterclockwise when 72 images are displayed (0 82). J Press J to view the first picture taken on the highlighted date. O Press O to delete all pictures taken on the highlighted date. I 83 Playback Zoom To zoom in on a photograph, display it full frame and press J and rotate the multi selector clockwise. Playback zoom is not available with movies or Motion Snapshots. The following operations can be performed: To Use Rotate the multi selector clockwise to zoom in, counterclockwise to zoom out. Whenever you zoom in or out, a navigation window will appear with the area currently visible in the display indicated by a yellow border. Press 1, 3, 4, or 2 to scroll the image. Zoom in Zoom out View other areas of image I View faces Exit zoom A See Also Description J Faces (up to five) detected during face priority are indicated by white borders in the navigation window. Press 4 or 2 to view other faces. Return to full-frame playback. The Face-priority zoom option in the playback menu (0 114) is used to choose whether the multi selector to be used to scroll from face to face during face-priority zoom. 84 Deleting Pictures Pictures can be deleted from the memory card as described below. Note that once deleted, pictures can not be recovered; protected images, however, will not be deleted. Deleting the Current Picture To delete the picture currently displayed in full-frame playback or selected in the thumbnail list, press O. A confirmation dialog will be displayed; press O again to delete the picture and return to playback, or press K to exit without deleting the picture. O button The Playback Menu To delete multiple images, press the G button, select Delete in the playback menu, and choose from the options below. A confirmation dialog will be displayed; select Yes to delete the images (note that some time may be required if a large number of images is selected). Highlight images and press 3 to select or deseDelete selected images lect (0 109). Press J to exit when the selection is complete. Delete all images Delete all pictures on the memory card. I 85 Rating Pictures Rate pictures or mark them as candidates for later deletion. Rating is not available with protected images. 1 Select a picture. Display a picture in full-frame playback. 2 Press 1 (&). Press 1 (&) and rotate the multi selector to choose from ratings of zero to five stars, or select ) to mark the picture as a candidate for later deletion. I 86 Slide Shows To view a slide show of the pictures on the memory card, press the G button, select Slide show in the playback menu, and follow the steps below. G button 1 Select the type of image used in the show. Highlight the desired option and press J. Display all the images on the memory card. Display still images only. Images taken using Easy Still images panorama will be displayed in panorama mode (0 41). Movies Display movies only. Display only the movie portion of Motion Snapshots. Motion Snapshot The associated photographs are not displayed. Display only images recorded on a selected Select images by date. A calendar will be date displayed; use the multi selector to highlight a date. Display only photos belonging to a specific scene. Choose from i Auto, k Portrait, l Landscape, Selected scene j Night landscape, o Night portrait, m Backlighting, n Close-up, p Easy panorama, q Soft, r Miniature effect, and s Selective color. Display only images in which the camera has Face priority detected a face (0 24). All images I 87 2 Adjust display times and choose a background track. Adjust the following options: Frame interval Choose how long each still image is displayed. Choose how much of each movie is played back before the next slide is displayed. Choose Same as Movie playback frame interval to display the next slide after the time time selected for Frame interval, No limit to play back the entire movie before displaying the next slide. Mute audio playback or choose a slide show background track (to play the highlighted background track prior to selection, press 2 and rotate the Audio multi selector to adjust volume; to end playback, press 2 again). Select Movie sound tracks to play only audio recorded with movies; in this case, no sound is played for still images or Motion Snapshots. I 88 3 Select Start. Highlight Start and press J to start the slide show. The following operations can be performed while a slide show is in progress: To Use Pause/resume J Pause the show. Press again to resume. Rotate the multi selector to adjust volume. Adjust volume Exit to playback mode Description Press 4 to return to the previous frame, 2 to skip to the next frame. Skip back/skip ahead K End the show and return to playback mode. The options shown at right are displayed when the show ends. Select Resume to restart or Exit to exit to the playback menu. I 89 I 90 QConnections Installing the Supplied Software Install the supplied software to copy pictures to your computer for viewing and editing pictures and creating short movies. Before installing the software, confirm that your system meets the requirements on page 93. 1 Launch the installer. Start the computer, insert the ViewNX 2/Short Movie Creator installer CD, and launch the installer. 2 Select a language. If the desired language is q Select region (if required) not available, click Region Selection to choose a different region and th en choose the desired language (region selection is not available in the European release). w Select language e Click Next Q 3 Start the installer. Click Install and follow the on-screen instructions. Click Install 91 4 Exit the installer. Click Yes (Windows) or OK (Mac OS) when installation is complete. Windows Mac OS Click Yes Click OK The following software is installed: • ViewNX 2 • Short Movie Creator • Apple QuickTime (Windows only) 5 Remove the installer CD from the CD-ROM drive. A Supplied Software Be sure to update to the latest versions of the supplied software. Nikon Message Center 2 will periodically check for updates while the computer is connected to the Internet. Q 92 System Requirements The system requirements for ViewNX 2 are: Windows • Photos/JPEG movies: Intel Celeron, Pentium 4, or Core series, 1.6 GHz or better CPU • H.264 movies (playback): 3.0 GHz Pentium D or better • H.264 movies (editing): 2.6 GHz Core 2 Duo or better Pre-installed versions of Windows XP, Windows Vista, WinOS dows 7, and Windows 8 • Windows 8/Windows 7/Windows Vista: 1 GB or more (2 GB or more recRAM ommended) • Windows XP: 512 MB or more (2 GB or more recommended) Hard-disk A minimum of 500 MB available on the startup disk (1 GB or more recspace ommended) • Resolution: 1024 × 768 pixels (XGA) or more (1280 × 1024 pixels/SXGA Monitor or more recommended) • Color: 24-bit color (True Color) or more Mac OS • Photos/JPEG movies: Intel Core or Xeon series CPU • H.264 movies (playback): 2 GHz Core Duo or better • H.264 movies (editing): 2.6 GHz Core 2 Duo or better OS Mac OS X version 10.6, 10.7, or 10.8 RAM 512 MB or more (2 GB or more recommended) Hard-disk A minimum of 500 MB available on the startup disk (1 GB or more recspace ommended) • Resolution: 1024 × 768 pixels (XGA) or more (1280 × 1024 pixels/SXGA Monitor or more recommended) • Color: 24-bit color (millions of colors) or more Q A Motion Snapshots ViewNX 2 is required to view Motion Snapshots saved using the File format > NMS files option in the shooting menu (0 124). 93 The system requirements for Short Movie Creator are: Windows 2 GHz intel Core 2 Duo or better Pre-installed versions of Windows XP, Windows Vista, WinOS dows 7, and Windows 8 1.5 GB or more with at least 128 MB of video RAM (2 GB or more RAM with at least 256 MB of video RAM recommended for creating HD movies) Hard-disk A minimum of 500 MB available on the startup disk (1 GB or more recspace ommended) • Resolution: 1024 × 768 pixels (XGA) or more Monitor • Color: 32-bit color (True Color) or more Other DirectX 9 or later and OpenGL 1.4 or later CPU Mac OS 2 GHz intel Core 2 Duo or better Mac OS X version 10.6, 10.7, or 10.8 1 GB or more A minimum of 500 MB available on the startup disk (1 GB or more recommended) • Resolution: 1024 × 768 pixels (XGA) or more Monitor • Color: 24-bit color (millions of colors) or more CPU OS RAM Hard-disk space If your system does not meet the above requirements, only ViewNX 2 will be installed (0 93). Q A Supported Operating Systems See the websites listed on page xvii for the latest information on supported operating systems. 94 Viewing and Editing Pictures on a Computer Transferring Pictures 1 Choose how pictures will be copied to the computer. Choose one of the following methods: • Direct USB connection: Turn the camera off and ensure that the memory card is inserted in the camera. Connect the camera to the computer using the supplied USB cable (do not use force or insert the connectors at an angle) and then turn the camera on. • SD card slot: If your computer is equipped with an SD card slot, the card can be inserted directly in the slot. • SD card reader: Connect a card reader (available separately from third-party suppliers) to the computer and insert the memory card. 2 Start the Nikon Transfer 2 component of ViewNX 2. Q If a message is displayed prompting you to choose a program, select Nikon Transfer 2. A Windows 7 If the following dialog is displayed, select Nikon Transfer 2 as described below. 1 Under Import pictures and videos, click Change program. A program selection dialog will be displayed; select Import File using Nikon Transfer 2 and click OK. 2 Double-click Import file. 95 3 Click Start Transfer. At default settings, all the pictures on the memory card will be copied to the computer. Click Start Transfer 4 Terminate the connection. If the camera is connected to the computer, turn the camera off and disconnect the USB cable. If you are using a card reader or card slot, choose the appropriate option in the computer operating system to eject the removable disk corresponding to the memory card and then remove the card from the card reader or card slot. Viewing Pictures Q Pi c t u r e s a r e d i s p l a y e d i n ViewNX 2 when transfer is complete. A Starting ViewNX 2 Manually • Windows: Double-click the ViewNX 2 shortcut on the desktop. • Mac OS: Click the ViewNX 2 icon in the Dock. 96 ❚❚ Retouching Photographs To crop pictures and perform such tasks as adjusting sharpness and tone levels, click the Edit button in the toolbar. ❚❚ Creating Short Movies Use the Short Movie Creator to create short movies combining photos, music, Motion Snapshots, and movie footag e (0 98). ❚❚ Printing Pictures Click the Print button in the toolbar. A dialog will be displayed, allowing you to print pictures on a printer connected to the computer. A For More Information Consult online help for more information on using ViewNX 2. Q 97 Creating Short Movies Use the supplied Short Movie Creator software to create movies combining photographs with Motion Snapshots, movies, and music. 1 Transfer pictures. Transfer pictures as described on page 95. 2 Select components. Select pictures in ViewNX 2. 3 Start Short Movie Creator. Click the Short Movie Creator button in ViewNX 2. Q The images selected in Step “Components” panel 2 will be displayed in the Short Movie Creator “Components” panel; if desired, additional pictures can be dragged into the “Components” panel from ViewNX 2 and re-ordered using drag and drop. In the case of photos taken with the Smart Photo Selector, only the best shot will be displayed. The photo and movie components of Motion Snapshots appear as separate files. 4 Select a style and background track. Select a style in the “Styles” panel and a background track in the “Music” panel. To preview the movie, click . 98 5 Save the movie. Click Create Movie. The dialog shown at right will be displayed; select one of the following options and click Create. • Save file: Save the movie to a folder on the computer. • Save to Camera (memory card): Save the movie to a memory card so that it can later be played back on the camera. To use this option, you will first need to insert a memory card that has been formatted in the camera (0 158) into a card reader or card slot. A Starting Short Movie Creator If ViewNX 2 is not running, you can start Short Movie Creator by double-clicking the Short Movie Creator icon on the desktop (Windows) or clicking the Short Movie Creator icon in the Dock (Mac OS). A Viewing Short Movies on Other Devices Windows Mac OS Movies saved to a memory card using the Save to Camera (memory card) option in Short Movie Creator can be viewed on the camera, or displayed on a television monitor when the camera is connected to a TV (0 100). Movies created in other applications or using the Save file option in Short Movie Creator can not be viewed on the camera. Q A For More Information Consult online help for more information on using Short Movie Creator. 99 Viewing Pictures on TV Connect the camera to a television for playback. A Connecting an HDMI Cable Always turn the camera off before connecting or disconnecting HDMI cables. When connecting cables, do not use force or attempt to insert the connectors at an angle. High-Definition Devices A type C mini-pin High-Definition Multimedia Interface (HDMI) cable (available separately from third-party suppliers) can be used to connect the camera to high-definition video devices. 1 Connect the HDMI cable. Turn the camera off and connect the HDMI cable. Q Connect to HD device (choose cable with appropriate connector) Connect to camera 2 Tune the device to the HDMI channel. 3 Turn the camera on. Turn the camera on; the camera monitor will remain off and the camera shooting mode display will appear on the HD device. Pictures can be played back using camera controls as described elsewhere in this manual; note that the edges of images may not be visible in the display. 100 D Close the Connector Cover Close the connector cover when the connectors are not in use. Foreign matter in the connectors can interfere with data transfer. A Television Playback Volume can be adjusted using the controls on the television; adjusting volume on the camera has no effect. Use of an EH-5b AC adapter and EP-5C power connector (available separately) is recommended for extended playback. ❚❚ HDMI Device Control To control the camera remotely from a device that supports HDMI-CEC (High-Definition Multimedia Interface–Consumer Electronics Control), select On for HDMI device control in the camera setup menu. The HDMI-CEC device will display a remote control guide and the remote control can be used in place of the following camera controls: Camera 1, 3, 4, 2 J K G Slide show menu Remote control Up, down, left, and right buttons Center button Blue button Red button Green button The remote control guide can be hidden or displayed at any time by pressing the yellow button on the remote control. See the television manual for details. Q 101 Printing Photographs Selected JPEG images can be printed on a PictBridge printer connected directly to the camera. Connecting the Printer Connect the camera using the supplied USB cable. 1 Turn the camera off. 2 Connect the USB cable. Turn the printer on and connect the USB cable as shown. Do not use force or attempt to insert the connectors at an angle. Q A USB Hubs Connect the camera directly to the printer; do not connect the cable via a USB hub. 3 Turn the camera on. A welcome screen will be displayed in the monitor, followed by a PictBridge playback display. A Printing Via Direct USB Connection Be sure the EN-EL20 battery is fully charged or use an optional EH-5b AC adapter and EP-5C power connector. 102 Printing Pictures One at a Time 1 Select a picture. Press 4 or 2 to view additional pictures. Rotate the multi selector clockwise to zoom in on the current frame (0 84; rotate the multi selector counterclockwise to exit zoom). To view nine pictures at a time, rotate the selector counterclockwise when a picture is displayed full frame. Press 1, 3, 4, or 2 to highlight pictures, or rotate the multi selector clockwise to display the highlighted picture full frame. 2 Adjust print options. Press J to display PictBridge print options (0 105). Press 1 or 3 to highlight options and press 2 to select. 3 Start printing. Highlight Start printing and press J to start printing. To cancel before all copies have been printed, press J again. D Selecting Photographs for Printing Movies and NEF (RAW) photographs (0 120) can not be selected for printing. If Motion Snapshots are selected, only the photographs will be printed; the movie portion will not be printed. If photographs taken with the Smart Photo Selector are selected, only the best shot will be printed. Q D Panoramas Some printers may not print panoramas, while at some settings others may not print entire panoramas. See the printer manual for details. 103 Printing Multiple Pictures 1 Display the PictBridge menu. Press the G button in the PictBridge playback display (see Step 3 on page 102). 2 Choose an option. Highlight one of the following options and press 2. • Select images for printing: Select pictures for printing. • Print DPOF print order: Print an existing print order created with the DPOF print order option in the playback menu (0 106). The current print order will be displayed in Step 3. • Index print: To create an index print of all JPEG pictures on the memory card, proceed to Step 4. Note that if the memory card contains more than 256 pictures, a warning will be displayed and only the first 256 images will be printed. 3 Select pictures. Q Press 4 or 2 to highlight pictures. To select the current picture for printing, press 1. The number of prints will be set to 1; press 1 or 3 to specify the number of prints (up to 99; to deselect the picture, press 3 when the number of prints is 1). Continue until all the desired pictures have been selected. 4 Adjust print options. Press J to display PictBridge print options. Press 1 or 3 to highlight page size, border, or time stamp items and press 2 to display the options described on page 105; note that a warning will be displayed if the selected page size is too small for an index print. 104 5 Start printing. Highlight Start printing and press J to start printing. To cancel before all copies have been printed, press J again. A Errors See page 188 for information on what to do if an error occurs during printing. A PictBridge Print Options Highlight a page size (only sizes supported by the current Page printer are listed) and press J to select and exit to the previous size menu (to print at the default page size for the current printer, select Use printer settings). Number This option is listed only when pictures are printed one at a of time. Press 1 or 3 to choose number of copies (maximum 99), copies then press J to select and return to the previous menu. This option is listed only if supported by the printer. Highlight Print Use printer settings (use current printer settings), Yes (print border white borders), or No (no borders) and press J to select and exit to the previous menu. Highlight Use printer settings (use current printer settings), Print Yes (print times and dates of recording on photos), or No (no time time stamp) and press J to select and exit to the previous stamp menu. This option is listed only when pictures are printed one at a time on a printer that supports cropping. To exit without cropping, highlight No and press J. To crop the current picture, highlight Yes and press 2. A crop selection dialog will be disCrop played; rotate the multi selector clockwise to increase the size of the crop, counterclockwise to decrease. Press 1, 3, 4, or 2 to position the crop and press J. Note that print quality may drop if small crops are printed at large sizes. Q 105 Creating a DPOF Print Order: Print Set The DPOF print order option is used to create digital “print orders” for PictBridge-compatible printers and devices that support DPOF. Press the G button, select DPOF print order in the playb a c k m e n u, a n d ch o o s e f r o m t h e following options: Press 4 or 2 to highlight pictures (0 109). To select the current picture for printing, press 1. The picture will be marked with a Z icon and the number of prints will be set to 1; press 1 or 3 to specify the number of Select/ prints (up to 99; to deselect the picset ture, press 3 when the number of prints is 1). When the selection is complete, press J to display printing options. Highlight Print shooting info (print the shutter speed and aperture on all pictures in the print order) or Print date (print the date of recording on all pictures in the print order) and press 2 to select or deselect, and then press J to complete the print order. Reset Remove all pictures from the print order. Q D DPOF Print Order DPOF date and shooting info options are not supported when printing via direct USB connection; to print the date of recording on photographs in the current print order, use the PictBridge Print time stamp option (0 105). The DPOF print order option can not be used if there is not enough space on the memory card to store the print order. For restrictions on the types of images that can be selected for printing, see page 103. Print orders may not print correctly if images are deleted using a computer or other device after the print order is created. 106 oThe Playback Menu To display the playback menu, press G and select Playback. G button The playback menu contains the following options: Option Delete Description Delete multiple images. Slide show View movies and photos in a slide show. Choose whether pictures are displayed after shooting. Rotate “tall” (portrait-orientation) Rotate tall pictures for display during playback. DPOF print Create digital “print orders”. order Protect pictures from accidental Protect deletion. Rating Rate pictures. Brighten shadows in dark or back-lit photos, creating a retouched copy D-Lighting that is saved separately from the unmodified original. Create small copies of selected Resize pictures. Image review Default 0 — 85 Image type: All images Selected scene: Auto Frame interval: 5 s 87 Movie playback time: Same as frame interval Audio: Background track 1 On 110 On 110 — 106 — 110 — 110 — 111 Choose size: 1280×856; 1.1 M 112 o 107 Option Description Create cropped copies of selected pictures. Choose whether 4 and 2 can be Faceused during playback zoom (0 84) priority to select faces detected with face zoom priority. Create copies of movies from which Edit movie unwanted footage has been trimmed. Change Change the themes for existing theme Motion Snapshots. Crop Default 0 Aspect ratio: 3 : 2 113 On 114 — 114 — 115 A Playback The camera may be unable to display or retouch images that were created or have been edited with other devices. A Image Quality Copies created from JPEG photos are the same quality as the original, while copies created from NEF (RAW) photos are saved as fine-quality JPEG images (0 120). o 108 Selecting Multiple Images Choosing the options listed below displays an image selection dialog. Press 4 or 2 to highlight pictures (only pictures to which the operation applies are available for selection). • Delete > Delete selected images (0 85) • DPOF print order > Select/set (0 106) • Protect > Select/set (0 110) • Rating (0 110) • D-Lighting (0 111) • Resize > Select images (0 112) • Crop > Select images (0 113) • Edit movie (0 114) • Change theme (0 115) A Inspecting Pictures The picture currently highlighted in the thumbnail display can be inspected by pressing 1; except in the cases of DPOF print order, Rating, and Change theme, the picture will be displayed full screen while the button is pressed. o 109 Image Review If On is selected, pictures will be displayed immediately after shooting. To view pictures when Off is selected, press the K button. Rotate Tall Choose whether to rotate “tall” (portrait-orientation) pictures for display during playback. Note that because the camera itself is already in the appropriate orientation during shooting, images are not rotated automatically during image review. On Off “Tall” (portrait-orientation) pictures are automatically rotated for display in the camera monitor. Pictures taken with Off selected for Auto image rotation (0 163) will be displayed in “wide” (landscape) orientation. “Tall” (portrait-orientation) pictures are displayed in “wide” (landscape) orientation. Protect Protect selected images from accidental deletion. Note that this option does NOT protect files from deletion when the memory card is formatted (0 158). o Press 4 or 2 to highlight pictures (0 109) and press 3 to Select/set select or deselect. Press J to exit when the operation is complete. Reset Remove protection from all pictures. Rating Press 4 or 2 to highlight pictures (0 109) and press 1 or 3 to choose a rating (0 86). Press J to exit when the operation is complete. 110 D-Lighting Applied to selected images, D-Lighting creates copies that have been processed to brighten shadows. Use to retouch dark or backlit photographs. Before After Press 4 or 2 to highlight an image (0 109) and press J to display the options shown at right. Press 1 or 3 to choose the amount of correction performed (the effect can be previewed in the display) and press J to create a retouched copy. D D-Lighting Noise (randomly-spaced bright pixels, fog, or lines) may appear in copies created with D-Lighting. Uneven shading may be visible with some subjects. A Image Size Copies created from JPEG photos are the same size as the original, while copies created from NEF (RAW) photos are saved as JPEG images with a size of 4608 × 3072. o 111 Resize Create small copies of selected photographs. Select Choose size and choose a size from 1280×856; 1.1M (1280 × 856 pixels), 960×640; 0.6 M (960 × 640 pixels), and 640×424; 0.3M (640 × 424 pixels), and then choose Select images. Press 4 or 2 to highlight pictures (0 109) and press 3 to select or deselect. When the selection is complete, press J to display a confirmation dialog and select Yes to save the resized copies. D Resized Copies Playback zoom may not be available with resized copies. o 112 Crop Create a cropped copy of selected photographs. Select images Aspect ratio To select an image for trimming, choose Select images, highlight a picture (0 109), and press J. Choose from aspect ratios of 3 : 2, 4 : 3, 1 : 1, and 16 : 9. The selected image will be displayed with a default crop of the selected aspect ratio shown in yellow. Use the controls below to size and position the crop and save the copy. To Use Description Decrease crop size Rotate the multi selector counterclockwise to decrease the size of the crop. Increase crop size Rotate the multi selector clockwise to increase the size of the crop. Position crop Press 1, 3, 4, or 2 to position the crop. Create copy D Cropped Copies J Save the current crop as a separate file. Playback zoom may not be available with cropped copies. The size of the copy varies with crop size and aspect ratio and appears at upper left in the crop display. o 113 Face-Priority Zoom If On is selected, 4 and 2 can be used during playback zoom to select faces detected with face priority. If Off is selected, 4 and 2 can be used with 1 and 3 to scroll the display. Edit Movie Trim footage from movies to create edited copies. 1 Select Choose start point or Choose end point. Choose from the following options: • Choose start point: Trim the opening footage. • Choose end point: Trim the closing footage. 2 Select a movie. Press 4 or 2 to highlight a movie (0 109) and press J to select. 3 Pause the movie on opening or closing frame. o Play the movie back, pressing J to begin and resume playback and 3 to pause (0 65; the first frame is indicated by a h icon in the display, the last frame by i). Pause playback when you reach the frame that will become the new opening or closing frame. 4 Delete the unwanted frames. Press 1 to delete all frames before (Choose start point) or after (Choose end point) the current frame. 114 5 Save the copy. Highlight Yes and press J to save the edited copy. If necessary, the copy can be trimmed as described above to remove additional footage. D Trimming Movies Movies must be at least two seconds long. If a copy can not be created at the current playback position, the current position will be displayed in red in Step 4 and no copy will be created. The copy will not be saved if there is insufficient space available on the memory card. To prevent the camera from turning off unexpectedly, use a fullycharged battery when editing movies. Change Theme Assign existing Motion Snapshots new themes (NMS-format files only; Motion Snapshots created with MOV file selected for File format in the shooting menu can not be assigned new themes). Choose from Beauty, Waves, Relaxation, Tenderness, and None. Highlight a Motion Snapshot and press J to display a list of themes (to play a theme, highlight it and press 2; volume can be adjusted by rotating the multi selector). Highlight the new theme and press J. A confirmation dialog will be displayed; select Yes to save the selected Motion Snapshot with the new theme. o A See Also See page 124 for information on Motion Snapshot file formats. 115 o 116 iThe Shooting Menu To display the shooting menu, press G and select Shooting. G button The shooting menu contains the following options: Option Description Reset shooting Reset shooting options to options default values. Choose how the camera sets Exposure shutter speed and aperture in mode Motion Snapshot mode (0 53). Choose a file format and Image quality compression ratio. Image size Choose a size for new photos. Choose the number of shots selected by the Smart Photo Selector (0 47). Choose when the movie Movie before/ portion of Motion Snapshots is after recorded (0 53). Choose a file format for new File format Motion Snapshots (0 53). Choose how the camera Metering meters exposure. Number of shots saved Default 0 — 119 Scene auto selector 119 JPEG normal 120 4608 × 3072; 14.2 M (standard photos)/ Normal 120 panorama (panoramas) 5 123 1.0 s : 0.6 s 123 NMS files 124 Matrix 124 i 117 i Option Description Choose whether the camera Auto distortion corrects barrel and pincushion control distortion. Choose a color space for new Color space pictures. Active Avoid loss of detail in D-Lighting highlights and shadows. Enhance detail in highlights and shadows when HDR photographing high-contrast scenes with Backlighting selected in creative mode. Long exposure Reduce noise in long timeNR exposures. Adjust settings for 1 NIKKOR Optical VR lenses with vibration reduction. Choose whether to use vibration reduction in Motion Snapshot mode (0 53). This Electronic VR feature is available even if vibration reduction is not offered by the attached 1 NIKKOR lens. Choose how the camera Focus mode focuses. Choose how the focus area is AF-area mode selected. Face-priority Turn face priority on or off. Built-in AF Control the built-in AF-assist assist illuminator. Flash Control flash output. compensation * Varies with lens (0 128). 118 Default 0 Off 125 sRGB 126 On 127 On 40 Off 128 Active/On * 128 On 129 See page 130 129 Auto-area 134 On 136 On 136 0.0 137 Reset Shooting Options Select Yes to reset the options in the shooting menu and other shooting settings to default values (0 117, 180). Exposure Mode The options in the exposure mode menu offer varying degrees of control over shutter speed and aperture in Motion Snapshot mode (0 53). An automatic, “point-and-shoot” mode in which the camera not only chooses shutter speed and aperture but adjusts other settings to suit the subject (automatic scene selection; 0 23). The camera sets shutter speed and aperture for optimal P Programmed exposure (0 34). Recommended for snapshots and in auto other situations in which there is little time to adjust camera settings. You choose the shutter speed; the camera selects an S Shutteraperture for best results (0 35). Use to freeze or blur priority auto motion. You choose the aperture; the camera selects a shutter A Aperturespeed for best results (0 36). Use to blur the backpriority auto ground or bring both foreground and background into focus. You control both shutter speed and aperture (0 37). Set M Manual shutter speed to “Bulb” for long time-exposures. h Scene auto selector A ISO Sensitivity (P, S, A, and M Modes) i When an “auto” option is selected for ISO sensitivity (0 149), the camera will automatically adjust sensitivity within the selected range if optimal exposure can not be achieved at the selected shutter speed or aperture. 119 Image Quality Choose a file format and compression ratio for photographs. Option File type NEF (RAW) NEF JPEG fine JPEG normal JPEG JPEG basic NEF (RAW) + JPEG fine NEF/ JPEG Description Compressed 12-bit raw data from the image sensor are saved directly to the memory card. White balance, contrast, and other settings can be adjusted on a computer after shooting. Record JPEG images at a compression ratio of roughly 1 : 4 (fine quality). Record JPEG images at a compression ratio of roughly 1 : 8 (normal quality). Record JPEG images at a compression ratio of roughly 1 : 16 (basic quality). Two images are recorded: one NEF (RAW) image and one fine-quality JPEG image. Image Size Choose the size of photographs. ❚❚ Standard Photographs The following options are available in still image and Smart Photo Selector modes and when an option other than Easy panorama is selected in creative mode. i 120 Option Size (pixels) Approximate print size at 300 dpi (cm/in.) 1 # 4608×3072; 14.2 M 4608 × 3072 39.0 × 26.0/15.4 × 10.2 $ 3456×2304; 8.0 M 3456 × 2304 29.3 × 19.5/11.5 × 7.7 % 2304×1536; 3.5 M 2304 × 1536 19.5 × 13.0/ 7.7 × 5.1 ❚❚ Panoramas The following options are available when Easy panorama is selected in creative mode. Option A B Normal panorama Wide panorama Size (pixels) 1 Camera panned horizontally: 4800 × 920 Camera panned vertically: 1536 × 4800 Camera panned horizontally: 9600 × 920 Camera panned vertically: 1536 × 9600 Approximate print size at 300 dpi (cm/in.) 2 40.6 × 7.8/16.0 × 3.0 13.0 × 40.6/5.1 × 16.0 81.3 × 7.8/32.0 × 3.1 13.0 × 81.3/5.1 × 32.0 1 Figures for horizontal and vertical panorama are reversed if camera is rotated 90 degrees. 2 Print size in inches equals image size in pixels divided by printer resolution in dots per inch (dpi; 1 inch=approximately 2.54 cm). i 121 A NEF (RAW)/NEF (RAW) + JPEG The option selected for image size does not affect the size of NEF (RAW) images. NEF (RAW) images can be viewed on the camera or using software such as Capture NX 2 (available separately; 0 166) or ViewNX 2 (supplied). When photographs taken at NEF (RAW) + JPEG are viewed on the camera, only the JPEG image will be displayed. When photographs taken at these settings are deleted, both NEF and JPEG images will be deleted. A File Names Photos and movies are stored as image files with names of the form “xxx_nnnn.yyy,” where: • xxx is either NMS (Motion Snapshots recorded with NMS files selected for File format; 0 124) or DSC (photos, MOV-format Motion Snapshots, and movies, including copies created with Edit movie; 0 114), • nnnn a four-digit number between 0001 and 9999 assigned automatically in ascending order by the camera, and • yyy one of the following three letter extensions: “NEF” for NEF (RAW) images, “JPG” for JPEG images, or “MOV” for movies. The NEF and JPEG files recorded at settings of NEF (RAW)+JPEG have the same file names but different extensions. Trimmed copies created with Edit movie (0 114) have file names beginning with “DSC”; copies created with the other retouch options in the playback menu have file names beginning with “CSC” (e.g., “CSC_0001.JPG”). Images recorded with Adobe RGB selected for Color space (0 126) have names that begin with an underscore (e.g., “_DSC0001.JPG”). i 122 A Image Quality and Size Together, image quality and size determine how much space each photograph occupies on the memory card. Larger, higher quality images can be printed at larger sizes but also require more memory, meaning that fewer such images can be stored on the memory card (0 181). Number of Shots Saved Choose the number of shots selected by the Smart Photo Selector. If 5 is selected, the camera will save the best shot and 4 best shot candidates. If 1 is selected, the camera will save only the best shot. Movie Before/After Choose whether the movie portions of Motion Snapshots end when the shutter-release button is pressed all the way or about 0.6 s after (0 53). If 1.6 s : 0 s is selected, the photograph used for the Motion Snapshot will feature the last frame of the movie. Movie footage starts about a second before the shutterrelease button is pressed all the way down and ends about 0.6 s after. Shutter-release button Shutter-release button pressed halfway pressed all the way down 1.0 s : 0.6 s 1.0 s 0.6 s Movie footage The camera records about 1.6 s of movie footage, ending when the shutter-release button is pressed all the way down. Shutter-release button Shutter-release button pressed halfway pressed all the way down i 1.6 s : 0 s 1.6 s Movie footage 123 File Format Choose the file format for Motion Snapshots (0 53). Motion Snapshots are recorded as a 4 s MOV file and a JPEG NMS files image. Motion Snapshots can only be viewed on the camera or using ViewNX 2 (0 93). Motion Snapshots are recorded as a 10 s MOV file that can be viewed in a variety of computer applications. The Motion SnapMOV file shot is not displayed automatically when shooting ends (0 54); for information on viewing Motion Snapshot movies, see page 65. Metering Choose how the camera sets exposure. The camera meters a wide area of the frame and adjusts for contrast (tone distribution), color, composition, and subject distance, producing natural results in most situations. The camera meters the entire frame but assigns the greatest Center- weight to the center area. This is the classic meter for porM weighted traits and is recommended if you are using filters with an exposure factor (filter factor) over 1×. The camera meters the current focus area; use to meter offcenter subjects (if Auto-area is selected for AF-area mode as described on page 134, the camera will meter the center focus area, while during face priority the camera will meter N Spot the focus area closest to the center of the selected face; 0 24). Spot metering ensures that the subject will be correctly exposed, even when framed against a background that is much brighter or darker. L Matrix i A Metering and Shooting Mode In auto and best moment capture modes and in creative modes other than P, S, A, and M, and when h Scene auto selector (0 119) is chosen in Motion Snapshot mode, metering is adjusted automatically according to the scene. 124 Auto Distortion Control Select On to reduce barrel distortion in photos taken with wideangle lenses and to reduce pin-cushion distortion in photos taken with long lenses (note that the edges of photographs may be cropped out, and that there may be an increase in the time needed to process images before they are saved). This option is available only with 1 NIKKOR lenses and not with other NIKKOR lenses attached using the FT1 mount adapter (0 202). Results are not guaranteed with third-party lenses. i 125 Color Space The color space determines the gamut of colors available for color reproduction. Choose sRGB for photos that will be used “as is,” with no further modification, Adobe RGB for photos that will be extensively processed or retouched after leaving the camera. Note that regardless of the option selected, sRGB is used for movies and Motion Snapshots and for photos taken during movie recording. A Color Space Color spaces define the correspondence between colors and the numeric values by which they are represented in a digital image file. The sRGB color space is widely used, while Adobe RGB is typically used in publishing and commercial printing. sRGB is recommended when taking photographs that will be printed without modification or viewed in applications that do not support color management, or when taking photographs that will be printed with ExifPrint, the direct printing option on some household printers, or kiosk printing or other commercial print services. Adobe RGB photographs can also be printed using these options, but colors will not be as vivid. JPEG photographs taken in the Adobe RGB color space are DCF compliant; applications and printers that support DCF will select the correct color space automatically. If the application or device does not support DCF, select the appropriate color space manually. For more information, see the documentation provided with the application or device. A Nikon Software i 126 ViewNX 2 (supplied) and Capture NX 2 (available separately) automatically select the correct color space when opening photographs created with this camera. Active D-Lighting Active D-Lighting preserves details in highlights and shadows for natural contrast. Use with high contrast scenes such as a brightly lit outdoor view framed in a door or window or a subjects in the shade on a sunny day. It is most effective when used with Matrix metering (0 124). Active D-Lighting: Off Active D-Lighting: Y On D Active D-Lighting Noise (randomly-spaced bright pixels, fog, or lines) may appear in photographs taken with Active D-Lighting. Uneven shading may be visible with some subjects. A “Active D-Lighting” Versus “D-Lighting” The Active D-Lighting option in the shooting menu adjusts exposure before shooting to optimize the dynamic range, while the D-Lighting option in the playback menu (0 111) brightens shadows in images after shooting. i 127 Long Exposure NR Photographs taken at slow shutter speeds are automatically processed to reduce “noise” (bright spots, randomly-spaced bright pixels, or fog), slightly increasing recording times. Selecting On increases the amount of noise reduction performed at shutter speeds slower than 1 s and increases the time required to record images by roughly 1.5 to 2 times. During processing, a warning will be displayed and pictures can not be taken (if the camera is turned off before processing is complete, the picture will be saved but noise reduction will not be performed). In continuous release mode, frame rates will slow and while photographs are being processed, the capacity of the memory buffer will drop. Optical VR This option is available with 1 NIKKOR lenses that support vibration reduction (VR). The options available vary with the type of lens: Normal/Active/Off for lenses that support active vibration reduction and On/Off for other VR lenses. Choose Active, Normal, or On to reduce the effects of vibration; choose Active when shooting from a moving vehicle or while walking or for other forms of strong camera shake, Normal for the relatively mild camera shake that occurs while standing still. A Vibration Reduction i 128 When the camera is panned, vibration reduction applies only to motion that is not part of the pan (if the camera is panned horizontally, for example, vibration reduction will be applied only to vertical shake), making it much easier to pan the camera smoothly in a wide arc. The composition may appear to change after the shutter is released, but this does not indicate a malfunction. Electronic VR Select On to enable electronic vibration reduction while recording Motion Snapshots. This feature is available even if the attached 1 NIKKOR lens does not support vibration reduction. Note that there will be a slight delay before recording begins and that the edges of the image will be cropped out when On is selected. Focus Mode Choose how the camera focuses. AF-A AF-S AF-C AF-F MF Auto-select AF: The camera automatically selects AF-S if the subject is stationary, AF-C if it is moving. Single AF: For stationary subjects. Focus locks when the shutterrelease button is pressed halfway. * Continuous AF: For subjects in motion. The camera focuses continuously on the subject in the AF-area brackets while the shutter-release button is pressed halfway (note that the AF-area brackets appear only in the detailed display; 0 159). Photos can be taken whether or AF-area brackets not the camera is in focus. Full-time AF: For subjects in motion. The camera focuses continuously; photos can be taken whether or not the camera is in focus. Manual focus: Focus manually (0 132). Photos can be taken whether or not the camera is in focus. * Shutter can only be released if camera is able to focus. i 129 A Focus Mode The options available vary as shown below. Menu Shooting Movies i 130 Focus mode AF-A (default), AF-S, AF-C, MF P Programmed auto, S Shutterpriority auto, A Aperture-priority AF-F (default), AF-S, MF auto, M Manual y Slow motion AF-S (default), MF A Getting Good Results with Autofocus Autofocus does not perform well under the conditions listed below. The shutter release may be disabled if the camera is unable to focus under these conditions, or the focus area may be displayed in green and the camera may sound a beep, allowing the shutter to be released even when the subject is not in focus. In these cases, focus manually (0 132) or use focus lock (0 135) to focus on another subject at the same distance, and then recompose the photograph. There is little or no contrast between the subject and the background. Example: The subject is the same color as the background. The subject contains objects at different distances from the camera. Example: The subject is inside a cage. The subject is dominated by regular geometric patterns. Example: Blinds or a row of windows in a skyscraper. The subject contains areas of sharply contrasting brightness. Examples: The subject is half in the shade; a night scene with point illumination. Background objects appear larger than the subject. Example: A building is in the frame behind the subject. The subject contains many fine details or is made up of objects that are small or lack variation in brightness. Example: A field of flowers. i A See Also See page 160 for information on controlling the beep that sounds when the camera focuses. 131 Manual Focus Manual focus can be used when autofocus does not produce the desired results. 1 Select manual focus. Highlight Manual focus in the focus mode menu (0 129) and press 2. 2 Choose a magnification. To choose the magnification for the manual focus display, highlight 10× zoom, 5× zoom, or 2× zoom and press J. 3 Display the manual focus guides. In the shooting display, press J to magnify the view at the center of the frame by the amount selected in Step 2 (this feature is not available during movie recording or in slowmotion movie mode). Manual focus guides are also displayed. i 132 4 Focus. Rotate the multi selector until the subject is in focus. Rotate the multi selector clockwise to increase the focus distance, counterclockwise to decrease; the faster you rotate the multi selector, the quicker the focus distance changes. The focus indicator shows the approximate focus distance. Press J when the subject is in focus. Press 1, 3, 4, or 2 to view areas of the frame not currently visible in the display; the visible portion is shown by the navigation window. Focus indicator Navigation window A Movies The multi selector can also be used to choose the focus distance if manual focus is selected prior to movie recording. Rotate the multi selector clockwise to increase the focus distance, counterclockwise to decrease; the faster you rotate the multi selector, the quicker the focus distance changes. A Focal Plane Position To determine the distance between your subject and the camera, measure from the focal plane mark on the camera body. The distance between the lens mounting flange and the focal plane is approximately 17 mm (0.7 in.). Approx. 17 mm i Focal plane mark 133 AF-Area Mode Choose how the focus area for autofocus is selected. The camera automatically detects the subject and selects the focus area. Press J to view the focus area selection display, then use the multi selector to position the Single- focus area over your subject c point and press J; the camera focuses on the subject in the Focus area selected focus area only. Use with stationary subjects. Focus area Press J to view the focus area selection display, then use the multi selector to position the focus area over your subject and press J. The focus area will track the subject as it Subject moves through the area shown 9 tracking at right. The camera will focus Subject tracking area on the selected subject when the shutter-release button is pressed halfway. To end focus tracking when shooting is complete, press J. e i 134 Autoarea A Subject Tracking The camera may be unable to track subjects if they move quickly, leave the frame or are obscured by other objects, change visibly in size, color, or brightness, or are too small, too large, too bright, too dark, or similar in color or brightness to the background. Focus Lock When Single AF is selected for Focus mode (0 129), focus lock can be used to change the composition after focusing on the subject in the center of the frame, allowing you to focus on a subject that will not be in the center of the final composition. If the camera is unable to focus using autofocus (0 131), you can also focus on another subject at the same distance and then use focus lock to recompose the photograph. Focus lock is most effective when an option other than Auto-area is selected for AF-area mode (0 134). 1 Lock focus. Position the subject in the center of the frame and press the shutterrelease button halfway to initiate focus. Check that the focus area is displayed in green. Focus will remain locked while the shutter-release button is pressed halfway. 2 Recompose the photograph and shoot. Focus will remain locked between shots. i Do not change the distance between the camera and the subject while focus lock is in effect. If the subject moves, lift your finger from the shutter-release button to end focus lock and then focus again at the new distance. 135 Face-Priority Choose On to enable face priority (0 24). Built-in AF Assist When On is selected, the built-in AFassist illuminator will light to illuminate poorly-lit subjects if: • AF-S is selected for focus mode (0 129) or single AF is selected in AF-A, and • Auto-area or Single-point is selected for AF-area mode (0 134). AF-assist illuminator The AF-assist illuminator will not light to assist the focus operation in advanced movie mode, during movie recording, or when Off is selected. If the AF-assist illuminator does not light, autofocus may not produce the desired results when lighting is poor. A The AF-Assist Illuminator Larger lenses may prevent the illuminator lighting all or part of the subject. Remove lens hoods when using the illuminator. Information on the modes in which AF-assist is available may be found on page 176. i 136 Flash Compensation Flash compensation alters flash output from the level suggested by the camera, changing the brightness of the main subject relative to the background. Choose from values between –3 EV (darker) and +1 EV (brighter) in increments of 1/3 EV; in general, positive values make the subject brighter while negative values make it darker. A Y icon is displayed when flash compensation is in effect. Normal flash output can be restored by setting flash compensation to ±0. Flash compensation is not reset when the camera is turned off. i 137 i 138 (The Movie Menu To display the movie menu, press G and select Movies. G button The movie menu contains the following options: Option Reset movie options Description Reset movie menu options to their default values. Choose a frame rate for slowFrame rate motion movies (0 62). Choose HD movie frame size Movie settings and frame rate (0 58). Choose how the camera Metering meters exposure. Movie sound options Choose sound recording options. Adjust settings for 1 NIKKOR lenses with vibration reduction. Choose how the camera Focus mode focuses. Choose how the focus area is AF-area mode selected. Face-priority Turn face priority on or off. Optical VR Default 0 — 140 400 fps 140 1080/60i 141 Matrix 124 Microphone: Auto sensitivity (A) 142 Wind noise reduction: On Active/On 1 128 See page 130 129 Auto-area 2 134 On 3 136 ( 1 Varies with lens (0 128). 2 The camera focuses on the subject in the center of the frame when y Slow motion is selected in advanced movie mode. 3 Face detection is not available when y Slow motion is selected in advanced movie mode. 139 Reset Movie Options Select Yes to reset the options in the movie menu to default values (0 139). Frame Rate Choose a frame rate for slow-motion movies (0 62). The faster the frame rate, the smaller the frame size. Option 400 fps 1200 fps Frame size (pixels) 640 × 240 320 × 120 Bit rate (approx.) 2 Mbps 1 Mbps Maximum length Maximum length (shooting) (playback) * 3 seconds 40 seconds 3 seconds 2 minutes * All figures are approximate. Slow-motion movies will play back over a period of about 13.2 (400 fps) or 40 (1200 fps) times the recording time. A See Also For information on the total length of movies that can be stored on the memory card, see page 183. ( 140 Movie Settings Choose a frame size and frame rate for HD movies (0 58). Option Frame size (pixels) Recording rate t 1080/60i 59.94 fields/s * 1920 × 1080 r 1080/30p 29.97 fps u 720/60p 59.94 fps 1280 × 720 s 720/30p 29.97 fps Bit rate (approx.) Maximum length 24 Mbps 20 minutes 24 Mbps 16 Mbps 29 minutes 12 Mbps * Sensor output is about 60 fps. A Photo Frame Size Photographs recorded by pressing the shutter-release button all the way down during movie recording have an aspect ratio of 3 : 2. The frame size varies with the option selected for Movie settings: • 1080/60i and 1080/30p: 4608 × 3072 pixels • 720/60p and 720/30p: 1280 × 856 pixels A See Also For information on the total length of movies that can be stored on the memory card, see page 183. ( 141 Movie Sound Options Adjust movie sound recording settings for the built-in microphone. ❚❚ Microphone Select Microphone off to disable sound recording. Selecting any other option enables recording and sets the microphone to the selected sensitivity. A The 2 Icon Movies recorded with the microphone off are indicated by a 2 icon in full-frame and movie playback. ❚❚ Wind Noise Reduction Select On to enable the low-cut filter, reducing noise produced by wind blowing over the microphone (note that other sounds may also be affected). ( 142 )The Image Processing Menu To display the image processing menu, press G and select Image processing. G button The image processing menu contains the following options: Option Reset processing options White balance ISO sensitivity Picture Control Custom Picture Control High ISO noise reduction Description Default 0 Reset image processing options to their default values. — 144 Auto 144 Auto (160–3200) 149 Standard 150 — 154 On 156 Adjust settings for different types of lighting. Control the camera’s sensitivity to light. Choose how the camera processes pictures. Create custom Picture Controls. Reduce noise at high ISO sensitivities. ) 143 Reset Processing Options Select Yes to reset the options in the image processing menu to default values (0 143). White Balance White balance ensures that colors are unaffected by the color of the light source. Auto white balance is recommended for most light sources, but other values can be selected if necessary according to the type of source. v Auto J I H N G M Incandescent Fluorescent Direct sunlight Flash Cloudy Shade Y Underwater L Preset manual Automatic white balance adjustment. Recommended in most situations. Use under incandescent lighting. Use with cool-white fluorescent lighting. Use with subjects lit by direct sunlight. Use with built-in flash. Use in daylight under overcast skies. Use in daylight with subjects in the shade. Choose when taking pictures underwater using an optional WP-N2 waterproof case (0 165). Measure white balance (0 146). A White Balance and Shooting Mode In auto and best moment capture modes and creative modes other than P, S, A, and M, and when h Scene auto selector (0 119) is chosen in Motion Snapshot mode, white balance is adjusted automatically according to the scene. ) 144 Fine-Tuning White Balance Options other than Preset manual can be fine-tuned as follows: 1 Display fine-tuning options. Highlight an option other than Preset manual and press 2 to display the fine-tuning options shown at right. Coordinates Adjustment 2 Fine-tune white balance. Use the multi selector to fine-tune white balance. Increase green Increase blue Increase amber Increase magenta A White Balance Fine Tuning The colors on the fine-tuning axes are relative, not absolute. For example, moving the cursor to B (blue) when a “warm” setting such as J (incandescent) is selected will make photographs slightly “colder” but will not actually make them blue. 3 Save changes and exit. Press J. An asterisk will appear next to the white balance icon (0 4) in the detailed display (0 159) to show that white balance has been altered from default values. ) 145 Preset Manual Preset manual is used to record and recall custom white balance settings for shooting under mixed lighting or to compensate for light sources with a strong color cast. 1 Light a reference object. Place a neutral gray or white object under the lighting that will be used in the final photograph. A standard gray panel can be used for increased precision. 2 Select Preset manual. Highlight Preset manual in the white balance menu and press 2. The dialog shown at right will be displayed; highlight Yes and press J to overwrite the existing value for preset manual white balance. The message shown at right will be displayed. ) 146 3 Measure white balance. When the camera is ready to measure white balance, a flashing L will be displayed. Before the indicator stops flashing, frame the reference object so that it fills the display and press the shutter-release button all the way down. No photograph will be recorded; white balance can be measured accurately even when the camera is not in focus. 4 Check the results. If the camera was able to measure a value for white balance, the message shown at right will be displayed. To return to shooting mode immediately, press the shutter-release button halfway. If lighting is too dark or too bright, the camera may be unable to measure white balance. The message at right will be displayed. Return to Step 3 and measure white balance again. ) 147 D Auto Power Off White balance measurement will end without a new value being acquired if no operations are performed for the time selected for Auto power off in the setup menu (0 160; the default is 1 minute). D Preset White Balance The camera can store only one value for preset white balance at a time; the existing value will be replaced when a new value is measured. Note that exposure is automatically increased by 1 EV when measuring white balance; in mode M, adjust exposure so that the exposure indicator shows ±0 (0 37). A Color Temperature The perceived color of a light source varies with the viewer and other conditions. Color temperature is an objective measure of the color of a light source, defined with reference to the temperature to which an object would have to be heated to radiate light in the same wavelengths. While light sources with a color temperature in the neighborhood of 5000–5500 K appear white, light sources with a lower color temperature, such as incandescent light bulbs, appear slightly yellow or red. Light sources with a higher color temperature appear tinged with blue. The camera white balance options are adapted to the following color temperatures (all figures are approximate): • Sodium-vapor lamps: 2700 K • J (incandescent)/ Warm-white fluorescent: 3000 K • White fluorescent: 3700 K • Cool-white fluorescent: 4200 K • Day white fluorescent: 5000 K ) 148 • H (direct sunlight): 5200 K • N (flash): 5400 K • G (cloudy): 6000 K • Daylight fluorescent: 6500 K • Mercury-vapor lamps: 7200 K • M (shade): 8000 K ISO Sensitivity The higher the ISO sensitivity, the less light needed to make an exposure, allowing faster shutter speeds or smaller apertures, but the more likely the image is to be affected by “noise” in the form of randomly-spaced bright pixels, fog, or lines. The camera adjusts ISO sensitivity in response to q Auto (160–6400) lighting conditions. ISO sensitivity is adjusted in x Auto (160–3200) the range given in brackets; choose larger ranges w Auto (160–800) for increased sensitivity when lighting is poor, smaller ranges to reduce noise. 160, 200, 400, 800, ISO sensitivity is fixed at the selected value. 1600, 3200, 6400 A “Auto” ISO Sensitivity Options When auto ISO sensitivity control is in effect, the display shows an ISO AUTO icon and the current ISO sensitivity. ) 149 Picture Control Choose how the camera processes photographs. Standard processing for balanced results. Recommended in most situations. Minimal processing for natural results. Choose for R Neutral photographs that will later be extensively processed or retouched. Pictures are enhanced for a vivid, photoprint effect. S Vivid Choose for photographs that emphasize primary colors. T Monochrome Take monochrome photographs. Process portraits for natural texture and a rounded e Portrait feel. Take vibrant photographs of landscapes and cityf Landscape scapes. Q Standard Modifying Picture Controls Existing preset and custom Picture Controls (0 154) can be modified to suit the scene or your creative intent. 1 Display options. Highlight an item in the Picture Control menu and press 2 to display Picture Control settings (0 152; the settings available with custom Picture Controls are the same as the preset controls on which they are based). To use an unmodified Picture Control, highlight it and press J. ) 150 2 Adjust settings. Press 1 or 3 to highlight the desired setting and press 4 or 2 to choose a value. Repeat this step until all settings have been adjusted, or select Quick adjust to choose a preset combination of settings. Default settings can be restored by pressing the O button. 3 Save changes and exit. Press J. A Preset Picture Controls Versus Custom Picture Controls The Picture Controls supplied with the camera are referred to as preset Picture Controls. Custom Picture Controls are created through modifications to existing Picture Controls using the Custom Picture Control option in the image processing menu (0 154). If desired, custom Picture Controls can be saved to a memory card and copied to other Nikon 1 J3 cameras or loaded into compatible software (0 155). A Modified Picture Controls Picture Controls that have been modified from default settings are indicated by asterisks (“*”) next to the Picture Control name and icon in the Picture Control menu (0 150) and next to the Picture Control icon (0 4) in the detailed display (0 159). A Picture Control and Shooting Mode In auto and best moment capture modes and creative modes other than P, S, A, and M, and when h Scene auto selector (0 119) is chosen in Motion Snapshot mode, the camera automatically chooses a Picture Control according to the scene. ) 151 ❚❚ Picture Control Settings Manual adjustments (all Picture Controls) Choose from options between –2 and +2 to reduce or exaggerate the effect of the selected Picture Control (note that this resets all manual adjustments). For Quick adjust example, choosing positive values for Vivid makes pictures more vivid. Not available with Neutral, Monochrome, or custom Picture Controls. Control the sharpness of outlines. Select A to adjust sharpening automatically according to the type of Sharpening scene, or choose from values between 0 (no sharpening) and 9 (the higher the value, the greater the sharpening). Select A to adjust contrast automatically according to the type of scene, or choose from values between –3 and +3 (lower values prevent highlights in portrait subContrast jects from being “washed out” in direct sunlight, while higher values preserve detail in misty landscapes and other low-contrast subjects). Choose –1 for reduced brightness, +1 for enhanced Brightness brightness. Does not affect exposure. Control the vividness of colors. Select A to adjust saturation automatically according to the type of scene, or Saturation choose from values between –3 and +3 (lower values reduce saturation and higher values increase it). Choose negative values (to a minimum of –3) to make reds more purple, blues more green, and greens more Hue yellow, positive values (up to +3) to make reds more orange, greens more blue, and blues more purple. Simulate the effect of color filters on monochrome phoFilter tographs. Choose from Off, yellow, orange, red, and effects green (0 153). Choose the tint used in monochrome photographs from B&W (black-and-white), Sepia, Cyanotype (blueToning tinted monochrome), Red, Yellow, Green, Blue Green, Blue, Purple Blue, and Red Purple (0 153). Manual adjustments (non-monochrome only) 152 Manual adjustments (monochrome only) ) D “A” (Auto) Results for auto sharpening, contrast, and saturation vary with exposure and the position of the subject in the frame. A Previous Settings The line under the value displayed in the Picture Control setting menu indicates the previous value for the setting. Use this as a reference when adjusting settings. A Filter Effects (Monochrome Only) The options in this menu simulate the effect of color filters on monochrome photographs. The following filter effects are available: Y (yellow) O (orange) R (red) G (green) Enhance contrast. Can be used to reduce the brightness of the sky in landscape photographs. Orange produces more contrast than yellow, red more contrast than orange. Softens skin tones. Can be used for portraits. Note that the effects achieved with Filter effects are more pronounced than those produced by physical glass filters. A Toning (Monochrome Only) Pressing 3 when Toning is highlighted displays saturation options. Press 4 or 2 to adjust saturation. Saturation control is not available when B&W (black-and-white) is selected. ) 153 Custom Picture Control The Picture Controls supplied with the camera can be modified and saved as custom Picture Controls. Edit/Save To create a custom Picture Control, select Edit/save and follow the steps below. 1 Select a Picture Control. Highlight an existing Picture Control and press 2, or press J to proceed to Step 3 to save a copy of the highlighted Picture Control without further modification. 2 Edit the selected Picture Control. See page 152 for more information. To abandon any changes and start over from default settings, press the O button. Press J when settings are complete. 3 Save the Picture Control. Highlight a destination (C-1 through C-9) and press J to save the custom Picture Control and return to the image processing menu. ) 154 The new Picture Control will be listed in the Picture Control menu. Load from/Save to Card Custom Picture Controls created using the Picture Control Utility available with ViewNX 2 or optional software such as Capture NX 2 can be copied to a memory card and loaded into the camera, or custom Picture Controls created with the camera can be copied to the memory card to be used in other Nikon 1 J3 cameras and compatible software and then deleted when no longer needed. To copy custom Picture Controls to or from the memory card, or to delete custom Picture Controls from the memory card, select Load from/save to card in the Custom Picture Control menu. The following options will be displayed: Copy custom Picture Controls from the memory card to custom Picture Controls C-1 through C-9. Delete selected custom Picture Controls from the memory card. The confirmation dialog shown at right will be disDelete from card played before a Picture Control is deleted; to delete the selected Picture Control, highlight Yes and press J. Copy a custom Picture Control (C-1 through C-9) to a Copy to card selected destination (1 through 99) on the memory card. Copy to camera A Copy to Card Up to 99 custom Picture Controls can be stored on the memory card at any one time. The memory card can only be used to store user-created custom Picture Controls. The preset Picture Controls supplied with the camera can not be copied to the memory card or deleted. A Custom Picture Control > Delete ) The Delete option in the Custom Picture Control menu can be used to delete selected custom Picture Controls from the camera when they are no longer needed. 155 High ISO Noise Reduction Select On to reduce “noise” (randomly-spaced bright pixels, lines, or fog). If Off is selected, noise reduction will only be performed at high ISO sensitivities; the amount of noise reduction is less than that performed when On is selected. ) 156 gThe Setup Menu To display the setup menu, press G and select Setup. G button The setup menu contains the following options: Option Description Default Reset setup menu options to — Reset setup options default values. — Format memory card Format the memory card. Allow the shutter to be Slot empty release released when no memory Release locked lock card is inserted in the camera. Adjust display brightness, Display brightness: 0 view or hide a framing grid, Grid display: Off Display and choose the information Shooting: Simple Playback: Basic info displayed in the monitor. Choose the sounds made Autofocus/self-timer: On Sound settings during shooting. Shutter: On Choose the auto power off Auto power off 1 min delay. Choose whether exposure Shutter button AE locks when the shutterOff lock release button is pressed halfway. Choose whether remote controls for HDMI-CEC devices to which the camHDMI device control On era is connected can be used to operate the camera. 0 158 158 159 159 160 160 161 101 g 157 Option Description Default Flicker reduction Reduce flicker or banding. — Reset file numbering Reset file numbering. — Time zone and date Set the camera clock. Daylight saving time: Off Choose a language for the Language — camera displays. Record camera orientation Auto image rotation On with pictures. Wireless mobile Enable or disable the wire— adapter less mobile adapter. Check and optimize the Pixel mapping camera image sensor and — image processors. Display the current firmFirmware version — ware version. 0 161 161 162 162 163 76 164 164 Reset Setup Options Select Yes to reset all setup menu options other than Flicker reduction, Time zone and date, and Language to default values. Format Memory Card Select Yes to format the memory card. Note that this permanently deletes all data on the card, including protected images; before proceeding, be sure to copy important pictures and other data to a computer (0 95). To exit without formatting the memory card, highlight No and press J. g 158 The message shown at right is displayed while the card is formatted; do not remove the memory card or remove or disconnect the power source until formatting is complete. Slot Empty Release Lock If Enable release is selected, the shutter can be released when no memory card is inserted. No pictures will be recorded, although they will be displayed in demo mode. Select Release locked to enable the shutter only when a card is inserted. Display Adjust the following display options. Display Brightness Press 1 or 3 to choose a value for monitor brightness. Choose higher values to brighten the display and lower values to make the display darker. Grid Display Select On to display a framing grid (0 5). Shooting Choose the information displayed during shooting (0 4). Simple Detailed g 159 Playback Choose the information displayed during playback (0 79). Basic info Detailed info Image only Sound Settings Highlight items and press 2 to select or deselect. If Autofocus/self-timer is selected, a beep will sound when the camera focuses and during self-timer photography; to mute the beep, remove the check from this item. Select Shutter to play a sound when the shutter is released, or remove the check from this item to mute the shutter. Press J to exit when settings are complete. Auto Power Off Choose how long the display remains on when no operations are per formed (0 17). Choose shorter delays to reduce the drain on the battery. Once the display has turned off, it can be reactivated by pressing the shutter-release button. g 160 Shutter Button AE Lock If On is selected, exposure will lock while the shutter-release button is pressed halfway. Flicker Reduction Reduce flicker and banding in the display and in movies while shooting under fluorescent or mercury-vapor lighting. Choose a frequency which matches that of the local AC power supply. A Flicker Reduction If you are unsure as to the frequency of the local power supply, test both options and choose the one that produces the best results. Flicker reduction may not produce the desired results if the subject is very bright, in which case you should select mode A or M and choose a smaller aperture (larger f-number). Reset File Numbering When a photograph is taken or a movie is recorded, the camera names the file by adding one to the number of the previous file (0 122). If the current folder is numbered 999 and contains either 999 photographs or a photograph numbered 9999, the shutter-release button will be disabled and no further photographs can be taken. To reset file numbering to 0001, select Yes for Reset file numbering and then either format the current memory card or insert a new memory card. g 161 Time Zone and Date Change time zones, set the camera clock, choose the date display order, or turn daylight saving time on or off (0 18). Choose a time zone. The camera clock is automatically set to the time in the new time zone. Date and time Set the camera clock. Choose the order in which the day, month, and year are Date format displayed. Turn daylight saving time on or off. The camera clock will Daylight automatically be advanced or set back one hour. The saving time default setting is Off. Time zone Language Choose a language for camera messages and displays. g 162 Auto Image Rotation Photographs taken while On is selected contain information on camera orientation, allowing them to be rotated automatically during playback or when viewed in ViewNX 2 (supplied) or Capture NX 2 (available separately; 0 166). The following orientations are recorded: Landscape (wide) orientation Camera rotated 90° clockwise Camera rotated 90° counterclockwise Camera orientation is not recorded when Off is selected. Choose this option when panning or taking photographs with the lens pointing up or down. D Auto Image Rotation Image orientation is not recorded for movies, Motion Snapshots, or panoramas. A Rotate Tall To automatically rotate “tall” (portrait-orientation) photographs for display during playback, select On for the Rotate tall option in the playback menu (0 110). g 163 Pixel Mapping Check and optimize the camera image sensor and image processors if you notice unexpected bright spots in your pictures (note that the camera comes with the sensor and processors already optimized). Before performing pixel mapping as described below, check that the battery is fully charged. 1 Attach a lens and lens cap. Turn the camera off and attach a 1 NIKKOR lens. Do not remove the lens cap. 2 Select Pixel mapping. Turn the camera on, press G, and select Pixel mapping in the setup menu. 3 Select Yes. Pixel mapping begins immediately. Note that other operations can not be performed while pixel mapping is in progress. Do not turn the camera off or remove or disconnect the power source until pixel mapping is complete. 4 Turn the camera off. Turn the camera off when pixel mapping is complete. Firmware Version View the current firmware version. g 164 nTechnical Notes Read this chapter for information on compatible accessories, cleaning and storing the camera, and what to do if an error message is displayed or you encounter problems using the camera. Optional Accessories At the time of writing, the following accessories were available for your camera. Lenses Mount adapters 1 mount lenses Mount Adapter FT1: The FT1 allows NIKKOR F mount lenses to be used with Nikon 1 interchangeable lens format digital cameras. The angle of view of an F mount lens mounted on the FT1 is equivalent to that of a 35 mm format lens with a focal length about 2.7 × longer. See page 202 for information on using the FT1. For information on attaching the FT1 and precautions for use, see the FT1 Mount Adapter User’s Manual. For information on the lenses that can be used, see Compatible NIKKOR F Mount Lenses. The FT1 Mount Adapter User’s Manual and Compatible NIKKOR F Mount Lenses are included with the FT1. Power • Rechargeable Li-ion Battery EN-EL20 (0 11–13): Additional sources EN-EL20 batteries are available from local retailers and Nikon-authorized service representatives. • Battery Charger MH-27 (0 11): Recharge EN-EL20 batteries. • Power Connector EP-5C, AC Adapter EH-5b: These accessories can be used to power the camera for extended periods (EH-5a and EH-5 AC adapters can also be used). An EP-5C power connector is required to connect the camera to the EH-5b, EH-5a, or EH-5; see page 169 for details. Waterproof Waterproof Case WP-N2: In addition to protecting the camera cases from rain, snow, and spray, this waterproof case can be used to take photographs underwater. n 165 Software Capture NX 2: A complete photo editing package offering such features as white balance adjustment and color control points. Note: Use the latest versions of Nikon software; see the websites listed on page xvii for the latest information on supported operating systems. At default settings, Nikon Message Center 2 will periodically check for updates to Capture NX 2 and other Nikon software and firmware while you are logged in to an account on the computer and the computer is connected to the Internet. A message is automatically displayed when an update is found. Body caps Body Cap BF-N1000: The body cap keeps the dust shield free of dust when a lens is not in place. Wireless Mobile Adapter WU-1b (0 76): Create a wireless connection that can be used by smart devices running the Wireless Mobile Utility to download pictures or control the camera remotely. Wireless mobile adapters n 166 Approved Memory Cards The following cards have been tested and approved for use in the camera. Cards with class 6 or faster write speeds are recommended for movie recording. Recording may end unexpectedly when cards with slower write speeds are used. SD cards SanDisk Toshiba 2 GB 1 Panasonic Lexar Media Platinum II — Professional Full-HD Video SDHC cards 2 4 GB, 8 GB, 16 GB, 32 GB SDXC cards 3 64 GB 48 GB, 64 GB 4 GB, 8 GB, 16 GB 4 GB, 8 GB, 16 GB, 32 GB — 4 GB, 8 GB, 16 GB 1 Check that any card readers or other devices with which the card will be used support 2 GB cards. 2 Check that any card readers or other devices with which the card will be used are SDHC-compliant. The camera supports UHS-1. 3 Check that any card readers or other devices with which the card will be used are SDXC-compliant. The camera supports UHS-1. Other cards have not been tested. For more details on the above cards, please contact the manufacturer. n 167 Approved Eye-Fi Cards When inserted in the camera, Eye-Fi cards can be used to upload photographs to a preselected destination. As of October 2012, the camera supports 8 GB Pro X2 SDHC cards. Eye-Fi cards are for use only in the country of purchase in accordance with local regulations. Eye-Fi cards may not be available in some countries or regions; consult the manufacturer for more information. Be sure the Eye-Fi card firmware has been updated to the latest version. Card status is indicated by an icon in the display: • f (static): Eye-Fi upload enabled; waiting to begin upload. • f (animated): Eye-Fi upload enabled; uploading data. • e: Eye-Fi upload enabled but no pictures available for upload. • g: Error. D Eye-Fi Cards Note that pictures will not be uploaded if signal strength is insufficient, and that Eye-Fi upload is disabled during movie recording. In locations in which wireless devices are prohibited, turn the camera off and remove the card. See the manual provided with the Eye-Fi card, and direct any inquiries to the manufacturer. n 168 Attaching a Power Connector and AC Adapter Turn the camera off before attaching an optional power connector and AC adapter. 1 Ready the camera. Open the battery-chamber/memory card slot cover. 2 Insert the EP-5C power connector. Be sure to insert the connector in the orientation shown, using the connector to keep the orange battery latch pressed to one side. The latch locks the connector in place when the connector is fully inserted. 3 Close the battery-chamber/memory card slot cover. Position the power connector cable so that it passes through the power connector slot and close the batterychamber/memory card slot cover. n 169 4 Connect the AC adapter. Connect the AC adapter power cable to the AC socket on AC adapter (e) and the EP-5C power cable to the DC socket (r). A P icon is displayed in the monitor when the camera is powered by the AC adapter and power connector. n 170 Storage and Cleaning Storage If the camera will not be used for an extended period, remove the battery and store it in a cool, dry area with the terminal cover in place. To prevent mold or mildew, store the camera in a dry, well-ventilated area. Do not store your camera with naphtha or camphor moth balls or in locations that: • are poorly ventilated or subject to humidities of over 60% • are next to equipment that produces strong electromagnetic fields, such as televisions or radios • are exposed to temperatures above 50 °C (122 °F) or below –10 °C (14 °F) Cleaning Use a blower to remove dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach or seaside, wipe off sand or salt with a cloth lightly dampened in Camera body distilled water and dry thoroughly. Important: Dust or other foreign matter inside the camera may cause damage not covered under warranty. Lenses are easily damaged. Remove dust and lint with a blower. If using an aerosol blower, keep the can vertical to Lens prevent the discharge of liquid. To remove fingerprints and other stains, apply a small amount of lens cleaner to a soft cloth and clean with care. Remove dust and lint with a blower. When removing fingerprints and other stains, wipe the surface lightly with a soft Monitor cloth or chamois leather. Do not apply pressure, as this could result in damage or malfunction. The dust shield is easily damaged. Remove dust and lint Dust shield with a blower. Do not use alcohol, thinner, or other volatile chemicals. n 171 Caring for the Camera and Battery: Cautions Do not drop: The product may malfunction if subjected to strong shocks or vibration. Keep dry: This product is not waterproof, and may malfunction if immersed in water or exposed to high levels of humidity. Rusting of the internal mechanism can cause irreparable damage. Avoid sudden changes in temperature: Sudden changes in temperature, such as those that occur when entering or leaving a heated building on a cold day, can cause condensation inside the device. To prevent condensation, place the device in a carrying case or plastic bag before exposing it to sudden changes in temperature. Keep away from strong magnetic fields: Do not use or store this device in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the display, damage data stored on the memory card, or affect the product’s internal circuitry. Keep the lens mount covered: Be sure to attach the body cap if the camera is without a lens. Do not touch the dust shield: The dust shield covering the image sensor is easily damaged. Under no circumstances should you exert pressure on the shield or poke it with cleaning tools. These actions could scratch or otherwise damage the shield. Turn the product off before removing or disconnecting the power source: Do not unplug the product or remove the battery while the product is on or while images are being recorded or deleted. Forcibly cutting power in these circumstances could result in loss of data or in damage to product memory or internal circuitry. To prevent an accidental interruption of power, avoid carrying the product from one location to another while the AC adapter is connected. n 172 Cleaning: When cleaning the camera body, use a blower to gently remove dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach or seaside, wipe off any sand or salt using a cloth lightly dampened in pure water and then dry the camera thoroughly. Lenses are easily damaged. Dust and lint should be gently removed with a blower. When using an aerosol blower, keep the can vertical to prevent discharge of liquid. To remove fingerprints and other stains from the lens, apply a small amount of lens cleaner to a clean, soft cloth and wipe the lens carefully. Storage: To prevent mold or mildew, store the camera in a dry, well-ventilated area. If you are using an AC adapter, unplug the adapter to prevent fire. If the product will not be used for an extended period, remove the battery to prevent leakage and store the camera in a plastic bag containing a desiccant. Do not, however, store the camera case in a plastic bag, as this may cause the material to deteriorate. Note that desiccant gradually loses its capacity to absorb moisture and should be replaced at regular intervals. To prevent mold or mildew, take the camera out of storage at least once a month. Turn the camera on and release the shutter a few times before putting it away. Store the battery in a cool, dry place. Replace the terminal cover before putting the battery away. Notes on the monitor: The monitor is constructed with extremely high precision; at least 99.99% of pixels are effective, with no more than 0.01% being missing or defective. Hence while these displays may contain pixels that are always lit (white, red, blue, or green) or always off (black), this is not a malfunction and has no effect on images recorded with the device. Images in the monitor may be difficult to see in a bright light. Do not apply pressure to the display, as this could cause damage or malfunction. Dust or lint on the display can be removed with a blower. Stains can be removed by wiping lightly with a soft cloth or chamois leather. Should the monitor break, care should be taken to avoid injury from broken glass and to prevent liquid crystal from the display touching the skin or entering the eyes and mouth. n 173 Do not leave the lens pointed at the sun: Do not leave the lens pointed at the sun or other strong light source for an extended period. Intense light may cause the image sensor to deteriorate or produce a white blur effect in photographs. Moiré: Moiré is an interference pattern created by the interaction of an image containing a regular, repeating grid, such as the pattern of weave in cloth or windows in a building, with the camera image sensor grid. In some cases, it may appear in the form of lines. If you notice moiré in your photographs, try changing the distance to the subject, zooming in and out, or changing the angle between the subject and the camera. Lines: Noise in the form of lines may in rare cases appear in pictures of extremely bright or backlit subjects. n 174 Batteries: Batteries may leak or explode if improperly handled. Observe the following precautions when handling batteries: • Use only batteries approved for use in this equipment. • Do not expose the battery to flame or excessive heat. • Keep the battery terminals clean. • Turn the product off before replacing the battery. • Remove the battery from the camera or charger when not in use and replace the terminal cover. These devices draw minute amounts of charge even when off and could draw the battery down to the point that it will no longer function. If the battery will not be used for some time, insert it in the camera and run it flat before removing it and storing it in a location with an ambient temperature of 15 °C to 25 °C (59 °F to 77 °F; avoid hot or extremely cold locations). Repeat this process at least once every six months. • Turning the camera on and off repeatedly when the battery is fully discharged will shorten battery life. Batteries that have been fully discharged must be charged before use. • The internal temperature of the battery may rise while the battery is in use. Attempting to charge the battery while the internal temperature is elevated will impair battery performance, and the battery may not charge or charge only partially. Wait for the battery to cool before charging. • Continuing to charge the battery after it is fully charged can impair battery performance. • A marked drop in the time a fully charged battery retains its charge when used at room temperature indicates that it requires replacement. Purchase a new EN-EL20 battery. • Charge the battery before use. When taking photographs on important occasions, ready a spare EN-EL20 battery and keep it fully charged. Depending on your location, it may be difficult to purchase replacement batteries on short notice. Note that on cold days, the capacity of batteries tends to decrease. Be sure the battery is fully charged before taking photographs outside in cold weather. Keep a spare battery in a warm place and exchange the two as necessary. Once warmed, a cold battery may recover some of its charge. • Used batteries are a valuable resource; recycle in accord with local regulations. D Servicing the Camera and Accessories The camera is a precision device and requires regular servicing. Nikon recommends that the camera be inspected by the original retailer or Nikon-authorized service representative once every one to two years, and that it be serviced once every three to five years (note that fees apply to these services). Frequent inspection and servicing are particularly recommended if the camera is used professionally. Any accessories regularly used with the camera, such as lenses, should be included when the camera is inspected or serviced. n 175 Available Settings The following table lists the settings that can be adjusted in each mode. ❚❚ C Auto, u Best Moment Capture, v Advanced Movie, and z Motion Snapshot Modes Shooting, movie, and image processing menus n 176 Exposure mode Image quality Image size 2 Number of shots saved Movie before/after File format Metering Auto distortion control Color space Active D-Lighting HDR Long exposure NR Optical VR 5 Electronic VR Focus mode AF-area mode Face-priority Built-in AF assist Flash compensation Frame rate 6 C — ✔1 ✔1 u P — — ✔ — ✔ — — ✔3 — v S A — — — — — — M — — — — — — — — — — — h ✔ — — P ✔ — — z S ✔ — — A ✔ — — M ✔ — — — — — — — — ✔ ✔ ✔ ✔ ✔ — — — — — — ✔ ✔ ✔ ✔ ✔ — — ✔4 ✔4 ✔4 ✔4 — ✔ ✔ ✔ ✔ ✔1 ✔ — — — — — — — — — ✔ — — — ✔ — — — — ✔ — — — — ✔ — ✔ ✔4 ✔4 — — — — — ✔ — ✔ ✔4 ✔4 — — — — — ✔ — ✔ ✔4 ✔4 — — — — — ✔ — ✔ ✔4 ✔4 — — — — — — — — — — — — — — — — — — — — — — — ✔ — — ✔ ✔ — — — — ✔ 1 — — — — ✔ ✔ — — — ✔ — — — — ✔ ✔ — ✔ ✔ ✔ — — — — ✔ ✔ — ✔ ✔ ✔ — — — — ✔ ✔ — ✔ ✔ ✔ — — — — ✔ ✔ — ✔ ✔ ✔ Shooting, movie, and image processing menus Other settings Movie settings Movie sound options White balance ISO sensitivity Picture Control Custom Picture Control High ISO noise reduction Focus area selection Flexible program Autoexposure lock Focus lock Continuous 7 Self-timer 7 Exposure compensation Flash mode Advanced movie Theme v z C u P S A M h P S A M ✔ — ✔4 ✔4 ✔4 ✔4 — — — — — ✔ — ✔4 ✔4 ✔4 ✔4 — — — — — — — ✔ — — ✔ — — ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ — ✔ ✔ ✔ ✔ ✔ — ✔ ✔ ✔ ✔ ✔ — ✔ ✔ ✔ ✔ — — ✔ ✔ ✔ ✔ — ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ — — ✔4 ✔4 ✔4 ✔4 — ✔ ✔ ✔ ✔ — — — ✔ ✔ — — — — — — ✔ ✔ — ✔ — ✔ ✔ — ✔ — ✔ ✔ — ✔ — — ✔ — ✔ — — — — — — ✔ ✔ — — — ✔ ✔ — — — ✔ ✔ — — — — ✔ — — ✔ — ✔4 ✔4 ✔4 — — ✔ ✔ ✔ — ✔ — — — — ✔ — — — — ✔ — — ✔ — — — — — — — ✔ — — — — — — ✔ ✔ ✔ ✔ ✔ 1 Has no effect on movies recorded with movie-record button. 2 RAW images fixed at 4608 × 3072 pixels. 3 Smart Photo Selector mode only. 4 Not available when y Slow motion is selected in advanced movie mode (0 62). 5 VR lenses only. 6 y Slow motion selected in advanced movie mode. 7 Continuous and self-timer can not be used together. n 177 ❚❚ w Creative Mode In the table below, creative modes are represented by the following icons: j night landscape, o night portrait, m backlighting, p easy panorama, q soft, r miniature effect, and s selective color. Shooting, movie, and image processing menus n 178 Exposure mode Image quality Image size Number of shots saved Movie before/after File format Metering Auto distortion control Color space Active D-Lighting HDR Long exposure NR Optical VR 5 Electronic VR Focus mode AF-area mode Face-priority Built-in AF assist Flash compensation Frame rate Movie settings Movie sound options White balance ISO sensitivity Picture Control Custom Picture Control High ISO noise reduction P S A M j o m p q r s — — — — — — — — — — — ✔ 1 ✔ 1 ✔ 1 ✔ 1 ✔ 1,2 ✔ 1,2 ✔ 1,2 ✔ 1,2 ✔ 1,2 ✔ 1,2 ✔ 1,2 ✔ 1,3 ✔ 1,3 ✔ 1,3 ✔ 1,3 ✔ 1 ✔ 1 ✔ 1 ✔ 1 ✔ 1 ✔ 1 ✔ 1 — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — ✔ 1,4 ✔ 1,4 ✔ 1,4 ✔ 1,4 — — — — — — — ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 — ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 — — — — — — ✔4 ✔4 ✔4 ✔4 — ✔ ✔ ✔ ✔ ✔ — — — — — ✔ 1,4 ✔ 1,4 ✔ 1,4 ✔ 1,4 — ✔1 ✔1 ✔1 ✔1 — ✔ ✔ ✔ ✔ — ✔ ✔ ✔ ✔ ✔ ✔4 ✔4 ✔4 ✔4 — — — — — — ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ — ✔ 1,4 ✔ 1,4 ✔ 1,4 ✔ 1,4 — ✔ ✔ ✔ ✔ — ✔1 — — — ✔ — — — — ✔ ✔ — ✔ ✔ — — — ✔1 — ✔ — ✔ — — — — ✔ ✔6 — ✔ ✔ — — — ✔ — — — ✔ — — — — ✔ — — ✔ ✔ — — — ✔1 — — — ✔ — — — — ✔ ✔ — ✔ ✔ — — — ✔1 — — — ✔ — — — — ✔ ✔ — ✔ ✔ — — — ✔1 — — — ✔ — — — — ✔ ✔ — ✔ ✔ — — — ✔ ✔ ✔ ✔ — — — — — — — ✔ ✔ ✔ ✔ — — — — — — — Other settings P S A Focus area selection ✔ ✔ ✔ Flexible program ✔1 — — Autoexposure lock ✔ ✔ ✔ Focus lock ✔ ✔ ✔ ✔ ✔ ✔ Continuous 7 ✔4 ✔4 ✔4 Self-timer 7 Exposure ✔ ✔ ✔ compensation Flash mode ✔4 ✔4 ✔4 Advanced movie — — — Theme — — — M ✔ — — ✔ ✔ ✔4 j — — ✔ ✔ — ✔ o — — ✔ ✔ — ✔ m — — ✔ ✔ — ✔ p — — ✔ ✔ — — q — — ✔ ✔ — ✔ r — — ✔ ✔ — ✔ s — — ✔ ✔ — ✔ — ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔4 — ✔ ✔6 — ✔ ✔ ✔ — — — — — — — — — — — — — — — — 1 Has no effect on movies recorded with movie-record button. 2 NEF (RAW) and NEF (RAW) + JPEG fine not available. 3 RAW images fixed at 4608 × 3072 pixels. 4 Not available when 15, 30, or 60 fps is selected for self-timer/continuous. 5 VR lenses only. 6 Not available when HDR is on. 7 Continuous and self-timer can not be used together. n 179 Defaults Defaults for the options in the playback, shooting, movie, image processing, and setup menus may be found on pages 107, 117, 139, 143, and 157, respectively. Defaults for other settings are listed below. Option Focus area (0 134) Flexible program (0 34) Focus lock (0 135) Continuous/self-timer (0 67) Exposure compensation (0 71) Flash mode (0 73) Default Center * Off Off 8 (single frame) 0.0 Auto, Soft, Miniature effect, Selective color: Auto Night portrait: Red-eye reduction P Programmed auto, S Shutter-priority auto, A Aperture-priority auto, M Manual, Backlighting: Fill flash Best moment capture (0 45) Slow view Advanced movie (0 57) P Programmed auto Theme (0 55) Beauty Picture Control settings (0 150) Unmodified * Not displayed when Auto-area is selected for AF-area mode. n 180 Memory Card Capacity The following table shows the number of pictures or amount of movie footage that can be stored on a 16 GB Toshiba SDE016GUX UHS-I SDHC card at different image quality, size, or movie settings. All figures are approximate; file size varies with the scene recorded. ❚❚ Auto, Creative (Easy Panorama Excluded), Slow View, and Smart Photo Selector 1 Image quality (0 120) Image size (0 120) 4608 × 3072 NEF (RAW) + 3456 × 2304 JPEG fine 3, 4 2304 × 1536 NEF (RAW) 3 — 4608 × 3072 JPEG fine 3456 × 2304 2304 × 1536 4608 × 3072 JPEG normal 3456 × 2304 2304 × 1536 4608 × 3072 JPEG basic 3456 × 2304 2304 × 1536 File size 26.6 MB 23.1 MB 20.5 MB 17.4 MB 9.2 MB 5.6 MB 3.1 MB 4.6 MB 2.9 MB 1.6 MB 2.4 MB 1.5 MB 0.8 MB No. of images Buffer capacity 2 591 25 682 25 766 26 902 27 1700 31 2700 37 5000 50 3300 41 5400 53 9800 75 6600 61 10700 85 18600 100 1 Number of shots saved set to 1. 2 Maximum number of pictures that can be stored in memory buffer at ISO 160. Drops if long exposure noise reduction is on (0 128) and at frame rates of 15, 30, and 60 fps (0 67). 3 Available in P, S, A, M mode only. 4 Image size applies to JPEG images only. Size of NEF (RAW) images can not be changed. File size is the total for NEF (RAW) and JPEG images. n 181 ❚❚ Easy Panorama Image quality (0 120) JPEG fine JPEG normal JPEG basic Image size (0 120) Normal 4800 × 920 panorama 1536 × 4800 Wide 9600 × 920 panorama 1536 × 9600 Normal 4800 × 920 panorama 1536 × 4800 Wide 9600 × 920 panorama 1536 × 9600 Normal 4800 × 920 panorama 1536 × 4800 Wide 9600 × 920 panorama 1536 × 9600 File size No. of images 4.5 MB 4.5 MB 8.6 MB 8.6 MB 2.3 MB 2.3 MB 4.4 MB 4.4 MB 1.2 MB 1.2 MB 2.2 MB 2.2 MB 3400 3400 1800 1800 6800 6800 3500 3500 13200 13200 7000 7000 File size 133.1 MB 115.4 MB 102.7 MB 87.1 MB 45.9 MB 28.2 MB 15.6 MB 23.2 MB 14.3 MB 8.0 MB 11.8 MB 7.4 MB 4.2 MB No. of shots 118 136 153 180 342 557 1000 679 1000 1900 1300 2100 3700 ❚❚ Smart Photo Selector 1 Image quality (0 120) NEF (RAW) + JPEG fine 2 NEF (RAW) JPEG fine JPEG normal JPEG basic Image size (0 120) 4608 × 3072 3456 × 2304 2304 × 1536 — 4608 × 3072 3456 × 2304 2304 × 1536 4608 × 3072 3456 × 2304 2304 × 1536 4608 × 3072 3456 × 2304 2304 × 1536 1 Number of shots saved set to 5. File size is total for 5 images. 2 Image size applies to JPEG images only. Size of NEF (RAW) images can not be changed. File size is the total for NEF (RAW) and JPEG images. n 182 ❚❚ HD Movies Movie settings (0 141) 1080/60i 1080/30p 720/60p 720/30p Maximum total length (approx.) * 1 hours 28 minutes 1 hours 28 minutes 2 hours 12 minutes 2 hours 56 minutes * For information on the maximum length that can be recorded in a single clip, see page 141. ❚❚ Slow-Motion Movies Frame rate (0 140) 400 fps 1200 fps Maximum total recorded length (approx.) * 1 hours 4 minutes 2 hours 8 minutes * Up to 3 s of slow-motion footage can be recorded in a single clip. Playback length is about 13.2 (400 fps) or 40 (1200 fps) times the recorded length. ❚❚ Motion Snapshots Image quality — — Image size — — Format (0 124) NMS MOV File size 21.6 MB * 30.8 MB No. of shots 729 510 * File size is the total for a single photograph and movie. n 183 Troubleshooting If the camera fails to function as expected, check this list of common problems before consulting your retailer or Nikon representative. Battery/Display The camera is on but does not respond: Wait for recording or any other processing to end. If the problem persists, turn the camera off. If the camera still does not respond, remove and replace the battery or disconnect and reconnect the AC adapter, but note that this will delete any data not yet saved. Data already saved to the memory card are unaffected. The display is off: • The camera is off (0 17) or the battery is exhausted (0 11, 20). • The display has turned off automatically to save power (0 160). The display can be reactivated by pressing the shutter-release button. • The camera is connected to a computer (0 95) or television (0 100). The camera turns off without warning: • The battery is low (0 11, 20). • The display has turned off automatically to save power (0 160). The display can be reactivated by pressing the shutter-release button. • The camera’s internal temperature is high (0 xvi, 190). Wait for the camera to cool before turning it on again. Indicators are not displayed: Use the Display > Shooting and Display > Playback options in the setup menu to choose the information displayed (0 159). n 184 Shooting (All Modes) The camera takes time to turn on: Delete files or format the memory card. The shutter-release is disabled: • The battery is exhausted (0 11, 20). • The memory card is locked (0 14) or full (0 20). • The flash is charging (0 72). • The camera is not in focus (0 22). • You are currently filming a slow-motion movie (0 61). Only one picture is taken each time the shutter-release button is pressed in continuous release mode: 5 fps is selected for Continuous/self-timer and the built-in flash is raised. The camera does not focus automatically: • The subject is not suited to autofocus (0 131). • The camera is in manual focus mode (0 129, 132). Focus does not lock when the shutter-release button is pressed halfway: Set the focus mode to AF-S (0 129, 135). Focus area selection is unavailable: Focus area selection is not available in auto-area AF (0 134) or face priority (0 24). In other AF-area modes, the focus area can be selected by pressing J. AF-area mode selection is unavailable: The camera is in auto or best moment capture mode (0 45), an option other than P, S, A, M is selected in creative mode (0 31), manual focus mode is selected (0 129), or the h Scene auto selector is used (0 119). Image size selection is unavailable: NEF (RAW) is selected for image quality (0 120). The camera is slow to record photos: Turn long exposure noise reduction off (0 128). In creative mode, additional time may be needed to record photos when Night landscape (0 32), Night portrait (0 33) or Easy panorama (0 41) is selected or when Backlighting is selected and HDR is on (0 40). Noise (bright spots, randomly-spaced bright pixels, fog, or lines) appears in photos: • Lower ISO sensitivity or enable high ISO noise reduction (0 149). • Use long exposure noise reduction at shutter speeds slower than 1 s (0 128). Smudges appear in photographs: Clean the front and rear lens elements or the dust shield (0 171). n 185 Flicker or banding appears in movies or in the display: Choose a Flicker reduction setting that matches the local AC power supply (0 161). No flash: See page 75. The flash will not fire when off (0 73); in P, S, A, and M modes, the flash will not fire when lowered. Menu items are unavailable: Some options are only available in particular shooting or exposure modes (0 176) or when the built-in flash is raised (0 72) or wireless mobile adapter is attached (0 76). Shooting (P, S, A, and M Modes) The shutter release is disabled: You selected mode S after choosing a shutter speed of “Bulb” in mode M (0 35). Some shutter speeds are not available: You are using the flash. Colors are unnatural: • Adjust white balance to match the light source (0 144). • Adjust Picture Control settings (0 150). Cannot measure white balance: The subject is too dark or too bright (0 147). Picture Controls produce varying results: A (auto) is selected for sharpening, contrast, or saturation. For consistent results over a series of photos, choose another setting (0 152, 153). Noise (reddish areas and other artifacts) appears in long time-exposures: Enable long exposure noise reduction (0 128). Movies Cannot record movies: The movie-record button can not be used to record movies in best moment capture or Motion Snapshot mode (0 49, 55). No sound is recorded for movies: • Microphone off is selected for Movie sound options > Microphone (0 142). • Live audio is not recorded with slow-motion movies (0 62) or Motion Snapshots (0 53). n 186 Playback NEF (RAW) images are not displayed: The camera displays only the JPEG copies of NEF (RAW) + JPEG fine images (0 122). “Tall” (portrait) orientation photos are displayed in “wide” (landscape) orientation: • Select On for Rotate tall (0 110). • The photos were taken with Auto image rotation off (0 163). • Camera was pointed up or down when the photo was taken (0 163). • Photo is displayed in image review (0 110). Cannot hear movie sound: • Rotate the multi selector clockwise to raise the volume (0 65). If the camera is connected to a television (0 100), use the controls for the TV to adjust the volume. • Live audio is not recorded with slow-motion movies (0 62) or Motion Snapshots (0 55). Cannot delete images: • Remove protection from the files before deletion (0 110). • The memory card is locked (0 14). Cannot select photos for printing: The memory card is full (0 20) or locked (0 14) or the photos are in NEF (RAW) format. To print NEF (RAW) photos, transfer the pictures to a computer and use the supplied software or Capture NX 2 (0 95). Pictures are not displayed on TV: The camera is not correctly connected (0 100). Pictures cannot be transferred to a computer: If your system does not meet the requirements on page 93, you may still be able to transfer pictures to the computer using a card reader. Photos are not displayed in Capture NX 2: Update to the latest version (0 166). Miscellaneous The date of recording is not correct: Set the camera clock (0 18, 162). Menu items are unavailable: Some options are only available at particular settings (0 176) or when a memory card is inserted (0 13). n 187 Error Messages This section lists the error messages that appear in the display. Message Solution If the subject is too bright, lower ISO sensitivity or choose a faster shutter speed or smaller aperture (higher (Shutter-speed or f-number). aperture display If the subject is too dark, raise ISO senflashes) sitivity, use the flash, or choose a slower shutter speed or larger aperture (lower f-number). A lens with a retractable lens barrel Keeping the zoom ring button is attached with the lens barrel button pressed, rotate retracted. Press the retractable lens the zoom ring to barrel button and rotate the zoom ring extend the lens. to extend the lens. Check lens. Pictures can only be taken Attach a lens. when a lens is attached. Cannot take pictures. Turn the camera off and recharge the Insert fully-charged battery or insert a fully charged spare battery. battery. Start-up error. Turn the Turn the camera off, remove and camera off and then replace the battery, and then turn the on again. camera on. The clock has been Set the camera clock. reset. Turn the camera off and confirm that No memory card. the card is correctly inserted. This memory card is Select Yes to format the card, or turn not formatted. Format the camera off and insert another the memory card? memory card. n 188 0 35, 36, 37, 149 35, 36, 37, 72, 149 16, 199 16 11, 13 13, 17 18, 162 13 13, 158 Message Solution Memory card is locked (write protected). Turn the camera off and slide the card Eye-Fi cards cannot be write-protect switch to the “write” used with the writeposition. protect switch in the "lock" position. • You may be able to record additional images if you reduce image quality or size. Memory card is full. • Delete unwanted images. • Insert another memory card. • Use an approved card. This memory card • Format the card. If the problem percannot be used. Card sists, the card may be damaged. Conmay be damaged; tact a Nikon-authorized ser vice insert a different card. representative. • Insert a new memory card. If the current folder is numbered 999 and contains either 999 photographs or a photograph numbered 9999, the shutCannot create ter-release button will be disabled and additional folders on no further photographs can be taken. memory card. Choose Yes for Reset file numbering and then either format the current memory card or insert a new memory card. The movie-record The movie-record button can not be button cannot be used used in best moment capture or in this mode. Motion Snapshot modes. Photographs cannot The shutter-release button can not be be recorded in this used to take photographs while a mode. slow-motion movie is being recorded. Photographs cannot be taken in shutter- priority Choose a different shutter speed, or auto mode at a shutter select mode M. speed of “Bulb”. 0 14 120 85 13, 167 167 158 13, 167 161 49, 55 61 35, 37 n 189 Message Solution Use a lens with a focal length of 6 to Cannot shoot 30 mm to shoot panoramas. If you are panorama with lens of using a zoom lens, choose a focal this focal length. length between 6 and 30 mm. Turn the camera off and then on again Failed to update lens and reattempt the update. If the probfirmware. Try again lem persists or reoccurs frequently, after turning the contact a Nikon-authorized service camera off and on. representative. Press the shutter-release button. ConAn error has occurred. tact a Nikon-authorized service reprePress the shuttersentative if the problem persists or rerelease button again. occurs frequently. An error has occurred Turn the camera off and then on again. in the internal circuitry. If the problem persists or reoccurs freTry again after turning quently, contact a Nikon-authorized the camera off and on. service representative. The camera’s internal temperature is high. Wait for the camera to cool. The camera will now turn off. Memory card contains To view pictures, insert a memory card no images. containing images. The file has been created or modified Cannot display this file. on a computer or different make of camera, or is corrupt. Check printer. Check the printer. Select Resume after loading paper of Check paper. the correct size. Paper jam. Clear the jam and select Resume. Out of paper. Insert paper and select Resume. Check ink supply. Select Resume after checking the ink. Out of ink. Replace the ink and select Resume. * See the printer manual for more information. n 190 0 41 — — — xvi 13 — —* —* —* —* —* —* Specifications Nikon 1 J3 Digital Camera Type Type Lens mount Effective angle of view Effective pixels Image sensor Image sensor Storage Image size (pixels) Digital camera with support for interchangeable lenses Nikon 1 mount Approx. 2.7× lens focal length (35 mm format equivalent) 14.2 million 13.2 mm × 8.8 mm CMOS sensor (Nikon CX format) Still images (auto, best moment capture, and all creative modes other than Easy panorama; aspect ratio 3 : 2) • 4608 × 3072 • 3456 × 2304 • 2304 × 1536 Still images (Normal panorama, camera panned horizontally; aspect ratio 120 : 23) • 4800 × 920 Still images (Normal panorama, camera panned vertically; aspect ratio 8 : 25) • 1536 × 4800 Still images (Wide panorama, camera panned horizontally; aspect ratio 240 : 23) • 9600 × 920 Still images (Wide panorama, camera panned vertically; aspect ratio 4 : 25) • 1536 × 9600 Still images (taken during movie recording, aspect ratio 3 : 2) • 4608 × 3072 (1080/60i, 1080/30p) • 1280 × 856 (720/60p, 720/30p) Still images (Motion Snapshots; aspect ratio 16 : 9) • 4608 × 2592 n 191 File format Picture Control system Media File system Shooting modes Shutter Type Speed Flash sync speed Release Mode Frame advance rate Self-timer n 192 • NEF (RAW): 12-bit, compressed • JPEG: JPEG-Baseline compliant with fine (approx. 1 : 4), normal (approx. 1 : 8), or basic (approx. 1 : 16) compression • NEF (RAW) + JPEG: Single photograph recorded in both NEF (RAW) and JPEG formats Standard, Neutral, Vivid, Monochrome, Portrait, Landscape; selected Picture Control can be modified; storage for custom Picture Controls SD (Secure Digital), SDHC, and SDXC memory cards DCF (Design Rule for Camera File System) 2.0, DPOF (Digital Print Order Format), Exif (Exchangeable Image File Format for Digital Still Cameras) 2.3, PictBridge C auto; w creative, with a choice of the following options: P, S, A, M, j night landscape, o night portrait, m backlighting, p easy panorama, q soft, r miniature effect, and s selective color; u best moment capture (t slow view and y Smart Photo Selector), v advanced movie (HD—P, S, A, M only—and y slow motion), z Motion Snapshot Electronic shutter / s in steps of 1/3 EV; Bulb Note: Bulb ends automatically after approximately 2 minutes Synchronizes with shutter at X= 1/60 s or slower 1 16,000 –30 • Single frame, continuous • Self-timer Approx. 5, 15, 30, or 60 fps 2 s, 5 s, 10 s Exposure Metering Metering method TTL metering using image sensor • Matrix • Center-weighted: Meters 4.5 mm circle in center of frame • Spot: Meters 2 mm circle centered on selected focus area Mode P programmed auto with flexible program; S shutter-priority auto; A aperture-priority auto; M manual; h scene auto selector Exposure compensation –3–+3 EV in increments of 1/3 EV Exposure lock Luminosity locked at metered value when shutter-release button is pressed halfway ISO sensitivity ISO 160–6400 in steps of 1 EV; auto ISO sensitiv(Recommended Exposure ity control (ISO 160–6400, 160–3200, 160–800) available Index) (user controlled in P, S, A, and M modes) Active D-Lighting On, off Focus Autofocus Hybrid autofocus (phase-detection/contrastdetect AF); AF-assist illuminator Lens servo • Autofocus (AF): Single AF (AF-S); continuous AF (AF-C); auto AF-S/AF-C selection (AF-A); fulltime AF (AF-F) • Manual focus (MF) AF-area mode Single-point, auto-area, subject tracking Focus area • Single-point AF: 135 focus areas; the center 73 areas support phase-detection AF • Auto-area AF: 41 focus areas Focus lock Focus can be locked by pressing shutter-release button halfway (single AF) Face priority On, off n 193 Flash Built-in flash Guide Number (GN) Control Mode Flash compensation Flash-ready indicator White balance n 194 • Auto; Soft, Miniature effect, Selective color (Creative mode): Flash pops up automatically and fires as required • Night portrait, Backlighting (Creative mode): Flash pops up automatically and fires with every shot • P programmed auto, S shutter-priority auto, A aperturepriority auto, M manual (Creative mode): Manual popup Approx. 5/16 (m/ft, ISO 100, 20 °C/68 °F; at ISO 160, Guide Number is approx. 6.3/20.7) i-TTL flash control using image sensor Auto, auto + red-eye reduction, fill flash, fill flash + slow sync, red-eye reduction, red-eye reduction + slow sync, rear-curtain sync, rear curtain + slow sync, off –3–+1 EV in increments of 1/3 EV Lights when built-in flash unit is fully charged Auto, incandescent, fluorescent, direct sunlight, flash, cloudy, shade, underwater, preset manual, all except preset manual with fine tuning Movie Metering Metering method TTL metering using image sensor • Matrix • Center-weighted: Meters 4.5 mm circle in center of frame • Spot: Meters 2 mm circle centered on selected focus area Frame size (pixels)/ HD movies (aspect ratio 16 : 9) recording rate • 1920 × 1080/60i (59.94 fields/s *) • 1920 × 1080/30p (29.97 fps) • 1280 × 720/60p (59.94 fps) • 1280 × 720/30p (29.97 fps) Slow-motion movies (aspect ratio 8 : 3) • 640 × 240/400 fps (plays at 30p/29.97 fps) • 320 × 120/1200 fps (plays at 30p/29.97 fps) Motion Snapshot (aspect ratio 16 : 9) 1920 × 1080/60p (59.94 fps) (plays at 24p/23.976 fps) File format MOV Video compression H.264/MPEG-4 Advanced Video Coding Audio recording format AAC Audio recording device Built-in stereo microphone; sensitivity adjustable * Sensor output is about 60 fps. Monitor 7.5 cm (3-in.), approx. 921k-dot, TFT LCD with brightness adjustment Playback Full-frame and thumbnail (4, 9, or 72 images or calendar) playback with playback zoom, movie and panorama playback, slide show, histogram display, auto image rotation, and rating option Interface USB HDMI output Hi-Speed USB Type C mini-pin HDMI connector n 195 Supported languages Power source Battery AC adapter Tripod socket Arabic, Bengali, Chinese (Simplified and Traditional), Czech, Danish, Dutch, English, Finnish, French, German, Greek, Hindi, Hungarian, Indonesian, Italian, Japanese, Korean, Norwegian, Persian, Polish, Portuguese (European and Brazilian), Romanian, Russian, Spanish, Swedish, Tamil, Thai, Turkish, Ukrainian, Vietnamese One rechargeable Li-ion EN-EL20 battery EH-5b AC adapter; requires EP-5C power connector (available separately) / (ISO 1222) Dimensions/weight Dimensions (W × H × D) Approx. 101.0 × 60.5 × 28.8 mm (4.0 × 2.4 × 1.1 in.), excluding projections Weight Approx. 244 g (8.6 oz) with battery and memory card but without body cap; approx. 201 g (7.1 oz), camera body only Operating environment Temperature 0 °C–40 °C (+32 °F–104 °F) Humidity 85% or less (no condensation) 1 4-in. • Unless otherwise stated, all figures are for a camera with a fully-charged battery operating at the temperature specified by the Camera and Imaging Products Association (CIPA): 23 ±3 °C (73.4 ±5.4 °F). • Nikon reserves the right to change the specifications of the hardware and software described in this manual at any time and without prior notice. Nikon will not be held liable for damages that may result from any mistakes that this manual may contain. n 196 MH-27 battery charger Rated input Rated output Supported batteries Charging time AC 100–240 V, 50–60 Hz, 0.2 A DC 8.4 V/0.6 A Nikon EN-EL20 rechargeable Li-ion batteries Approx. 2 hours at an ambient temperature of 25 °C (77 °F) when no charge remains Operating temperature 0 °C–40 °C (+32 °F–104 °F) Dimensions (W × H × D) Approx. 67.0 × 28.0 × 94.0 mm (2.6 × 1.1 × 3.7 in.), excluding plug adapter Weight Approx. 83 g (2.9 oz), excluding plug adapter EN-EL20 rechargeable Li-ion battery Type Rechargeable lithium-ion battery Rated capacity 7.2 V, 1020 mAh Operating temperature 0 °C–40 °C (+32 °F–104 °F) Dimensions (W × H × D) Approx. 30.7 × 50.0 × 14.0 mm (1.2 × 2.0 × 0.6 in.) Weight Approx. 41 g (1.4 oz), excluding terminal cover 1 NIKKOR VR 10–30mm f/3.5–5.6 Type 1 mount lens Focal length 10–30 mm Maximum aperture f/3.5–5.6 Construction 12 elements in 9 groups (including 3 aspherical elements) Angle of view 77°–29° 40′ Vibration reduction Lens shift using voice coil motors (VCMs) Minimum focus distance 0.2 m (0.7 ft) from focal plane at all zoom positions Diaphragm blades 7 (rounded diaphragm opening) Diaphragm Fully automatic Aperture range • 10 mm focal length: f/3.5–16 • 30 mm focal length: f/5.6–16 Filter-attachment size 40.5 mm (P=0.5 mm) Dimensions Approx. 57.5 mm diameter × 42 mm (distance from camera lens mount flange when lens is retracted) Weight Approx. 115 g (4.1 oz) n 197 1 NIKKOR 11–27.5mm f/3.5–5.6 Type 1 mount lens Focal length 11–27.5 mm Maximum aperture f/3.5–5.6 Construction 8 elements in 6 groups (including 1 ED lens element and 1 aspherical lens element), 1 protective glass element Angle of view 72°–32° 20′ Minimum focus distance 0.3 m (1.0 ft) from focal plane at all zoom positions Diaphragm blades 7 (rounded diaphragm opening) Diaphragm Fully automatic Aperture range • 11 mm focal length: f/3.5–16 • 27.5 mm focal length: f/5.6–16 Filter-attachment size 40.5 mm (P=0.5 mm) Dimensions Approx. 57.5 mm diameter × 31 mm (distance from camera lens mount flange when lens is retracted) Weight Approx. 83 g (3.0 oz) Specifications subject to change without notice. Nikon will not be held liable for damages that may result from any mistakes that this manual may contain. n 198 ❚❚ 1 NIKKOR Lenses 1 NIKKOR VR 10–30mm f/3.5–5.6 Lens cap Lens hood mounting mark Zoom ring Lens mounting mark CPU contacts Focal length mark Focal length scale Retractable lens barrel button 1 NIKKOR 11–27.5mm f/3.5–5.6 Lens cap Zoom ring Lens mounting mark CPU contacts Focal length mark Focal length scale Retractable lens barrel button n 199 1 NIKKOR lenses are exclusively for Nikon 1 interchangeable lens format digital cameras. The angle of view is equivalent to a 35 mm format lens with a focal length about 2.7× longer. The 1 NIKKOR VR 10–30mm f/3.5–5.6 supports normal and active vibration reduction and vibration reduction off (0 128). Use the zoom ring to zoom in and out. A Detaching the Lens Before removing or exchanging lenses, retract the lens and turn the camera off (0 16). To remove the lens, press and hold the lens release button (q) while turning the lens clockwise (w). After removing the lens, replace the lens caps and camera body cap. A Lens Care • When using an optional lens hood, do not pick up or hold the lens or camera using only the hood. • Keep the CPU contacts clean. • Use a blower to remove dust and lint from the lens surfaces. To remove smudges and fingerprints, apply a small amount of ethanol or lens cleaner to a soft, clean cotton cloth or lens-cleaning tissue and clean from the center outwards using a circular motion, taking care not to leave smears or touch the glass with your fingers. • Never use organic solvents such as paint thinner or benzene to clean the lens. • A lens hood or NC filter can be used to protect the front lens element. • Attach the front and rear caps when the lens is not in use. • If the lens will not be used for an extended period, store it in a cool, dry location to prevent mold and rust. Do not store in direct sunlight or with naphtha or camphor moth balls. • Keep the lens dry. Rusting of the internal mechanism can cause irreparable damage. • Leaving the lens in extremely hot locations could damage or warp parts made from reinforced plastic. n 200 A Supplied Accessories • 40.5 mm snap-on Front Lens Cap LC-N40.5 • Rear Lens Cap LF-N1000 A Optional Accessories • 40.5 mm screw-on filters • Bayonet Hood HB-N101 (for use with the 1 NIKKOR VR 10–30mm f/3.5–5.6; attaches as shown below). • 40.5 mm screw-on Hood HN-N102 (for use with the 1 NIKKOR 11–27.5mm f/3.5–5.6; attaches as shown below) n 201 ❚❚ The Optional FT1 Mount Adapter Read this section for information on using the optional FT1 mount adapter. Before proceeding, be sure that you have read and understood this manual and the documentation for the FT1 and lenses. Autofocus Autofocus is available only with AF-S lenses; other lenses support manual focus only. Set the camera focus mode to AF-S (the camera will not focus in other autofocus modes). The only AFarea mode available is Single-point and the camera focuses on the subject in the center focus area only. Face priority is not supported. In some cases, a beep may sound, the in-focus indicator may be displayed, and pictures can be taken when the camera is not in focus; if this occurs, focus manually. Manual Focus Follow the steps below to focus manually when using the FT1 with a NIKKOR F mount lens. 1 Select manual focus mode. In the shooting menu, select Focus mode, highlight Manual focus, press 2, and choose the magnification for the manual focus display from 10×, 5×, and 2× (0 132). 2 Focus. Rotate the lens focus ring until the subject is in focus. n 202 If the lens supports autofocus with manual override, after focusing using autofocus you can keep the shutter-release button pressed halfway and rotate the lens focus ring to finetune focus manually. To refocus using autofocus, press the shutter-release button halfway again. To zoom in on the display for more precise focus, press J (note that this feature is not available during movie recording or in slow-motion movie mode). The display will be zoomed in to the magnification selected in Step 1 and a navigation window will appear in a gray frame at the bottom right of the display. Navigation window Use the multi selector to scroll to areas of the frame not visible in the display. Press J to exit zoom. n 203 The Electronic Rangefinder If a CPU lens is attached in manual focus mode, the focus indicator can be used to check whether the camera is focused on the subject in the center focus area. Focus indicator I 2 4 2 4 (flashes) Status In focus. Camera focused in front of subject. Camera focused behind subject. Unable to determine focus. Note that with some subjects, the in-focus indicator (I) may be displayed when the camera is not in focus. Check focus in the display before shooting. Error Messages and Displays The following warnings appear in the camera aperture display. Display FEE F–– n 204 Problem Solution When using CPU lenses, lock Lens aperture ring is not aperture ring at minimum aperlocked at minimum aperture. ture (highest f-number). When using non-CPU lens, rotate Non-CPU lens is attached, or lens aperture ring to adjust aperno lens is attached. ture. Restrictions • Auto and best moment capture modes are not supported. • Motion Snapshots can be recorded only when an AF-S lens is attached and AF-S (Single AF) is selected for focus mode and then only when the camera is in focus. Do not attempt to adjust focus using the focus ring. • Shutter speeds of 1 s or slower are not available. • The sound monitor switch and focus operation button (Focus Lock/MEMORY RECALL/AF Start) have no effect. Precautions for Use • Lenses over 380 g (13.4 oz) should be supported at all times. Do not hold the camera or carry the camera by the strap without supporting the lens. Failure to observe this precaution could damage the camera lens mount. • Lines may appear in photographs taken with non-CPU lenses stopped down to minimum aperture. • Select mode A or M to prevent sounds made by the lens being picked up by the microphone. • During continuous shooting, focus is fixed at the position for the first shot in each burst. Frame rates will slow when 5 fps is selected for Continuous/self-timer. • Certain lenses will block the AF-assist illuminator and, at some distances, the flash. • The tops and bottoms may be missing from circular bokeh shapes created at wide apertures using lenses with a maximum aperture of f/1.4. n 205 ❚❚ Supported Standards • DCF Version 2.0: The Design Rule for Camera File Systems (DCF) is a standard widely used in the digital camera industry to ensure compatibility among different makes of camera. • DPOF: Digital Print Order Format (DPOF) is an industry-wide standard that allows pictures to be printed from print orders stored on the memory card. • Exif version 2.3: The camera supports Exif (Exchangeable Image File Format for Digital Still Cameras) version 2.3, a standard in which information stored with photographs is used for optimal color reproduction when the images are output on Exif-compliant printers. • PictBridge: A standard developed through cooperation with the digital camera and printer industries, allowing photographs to be output directly to a printer without first transferring them to a computer. • HDMI: High-Definition Multimedia Interface is a standard for multimedia interfaces used in consumer electronics and AV devices capable of transmitting audiovisual data and control signals to HDMI-compliant devices via a single cable connection. n 206 A Trademark Information Macintosh, Mac OS, and QuickTime are registered trademarks of Apple Inc. in the United States and/or other countries. Microsoft, Windows, and Windows Vista are either registered trademarks, or trademarks of Microsoft Corporation in the United States and/or other countries. The PictBridge logo is a trademark. Google Play is a trademark of Google Inc. The SD, SDHC, and SDXC logos are trademarks of SD-3C, LLC. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respective holders. A FreeType License (FreeType2) Portions of this software are copyright © 2013 The FreeType Project (http://www.freetype.org). All rights reserved. A MIT License (HarfBuzz) Portions of this software are copyright © 2013 The HarfBuzz Project (http://www.freedesktop.org/wiki/Software/HarfBuzz). All rights reserved. n 207 Battery Life The number of shots or movie footage that can be recorded with fully-charged batteries varies with the condition of the battery, temperature, the interval between shots, and the length of time menus are displayed. Sample figures for EN-EL20 (1020 mAh) batteries are given below. • Still images: Approximately 220 shots • Movies: Approximately 45 minutes of HD footage at 1080/60i Measured according to CIPA standards at 23 ±3 °C (73.4 ±5.4 °F) with the camera at default settings, a fully-charged battery, a 1 NIKKOR VR 10–30mm f/3.5–5.6 lens, and a 16 GB Toshiba SD-E016GUX UHS-I SDHC card. Value for still images obtained under the following test conditions: photographs taken at intervals of 30 s with the built-in flash fired with every other shot and the camera turned off and then on after every ten shots. Value for movies obtained under the following test conditions: a series of 20 minute movies with a file size of up to 4 GB were recorded; recording was only interrupted when temperature warning was displayed. The following can reduce battery life: • Keeping the shutter-release button pressed halfway • Repeated autofocus operations • Taking NEF (RAW) photographs • Slow shutter speeds • Using a wireless mobile adapter or Eye-Fi cards • Using vibration reduction mode with VR lenses • Using zoom with power zoom lenses n 208 To ensure that you get the most from rechargeable Nikon EN-EL20 batteries: • Keep the battery contacts clean. Soiled contacts can reduce battery performance. • Use batteries immediately after charging. Batteries will lose their charge if left unused. Index Symbols C (Auto mode) ............................. 6, 21 w (Creative mode) .................... 6, 31 u (Best moment capture mode) . 6, 45 v (Advanced movie mode) .... 6, 57 z (Motion Snapshot mode) ..... 6, 53 h (Scene auto selector) ............. 119 P (Programmed auto) 32, 34, 57, 119 S (Shutter-priority auto) ...32, 35, 57, 119 A (Aperture-priority auto) 32, 36, 57, 119 M (Manual) ................... 32, 37, 57, 119 j (Night landscape) .........................32 o (Night portrait) ..............................33 m (Backlighting) .........................33, 40 p (Easy panorama) ...................33, 41 q (Soft) ..................................................33 r (Miniature effect) ........................33 s (Selective color) ............................33 y (Slow motion) ...............................62 c (Portrait) .........................................23 d (Landscape) ...................................23 f (Night portrait) .............................23 e (Close up) .......................................23 g (Night landscape) .......................23 Z (Auto) ..............................................23 U (flexible program) .........................34 G (menu) button ...... 8, 107, 117, 139, 143, 157 K (playback) button ..........27, 50, 56 O (delete) button ...28, 51, 56, 66, 85 J (OK) button ...................................... 7 & (feature) 10, 25, 31, 47, 55, 58, 62, 86 C (continuous shooting/self-timer) . 67, 69 E (exposure compensation) .........71 N (flash mode) ....................................73 L (Preset manual) ........................146 L (matrix) ..........................................124 M (centerweighted) .......................124 N (spot) ..............................................124 e (auto-area) ..................................134 c (single-point) .............................134 9 (subject tracking) ....................134 8 (Single frame) ............................... 67 Y (red-eye reduction) .................... 74 p (slow sync) .................................... 74 q (rear-curtain sync) ...................... 74 N (flash-ready indicator) ................. 72 A AC adapter ............................... 165, 169 Accessories ........................................165 Active D-Lighting ............................127 Adobe RGB ........................................126 Advanced movie mode .......6, 57, 58 AE lock ................................................161 AF ................................................ 129, 134 AF-A .....................................................129 AF-area mode ...................................134 AF-assist illuminator ......................136 AF-C .....................................................129 AF-F ......................................................129 AF-S ......................................................129 Aperture ........................................ 36, 37 Aperture-priority auto ..... 32, 36, 57, 119 Attaching the lens ............................ 16 Auto distortion control .................125 Auto image rotation ......................163 Auto mode ......................................6, 21 Auto power off ..........................17, 160 Auto-area (AF-area mode) ...........134 Autofocus ................................. 129, 134 Automatic scene selection ............ 23 Auto-select AF ..................................129 Available settings ............................176 n 209 B Background track ................ 56, 88, 98 Backlighting ................................. 33, 40 Basic info .....................................79, 160 Battery ............................11, 13, 20, 197 Beep .......................................22, 69, 160 Best moment capture mode ......... 45 Best shot ........................................ 47, 50 Body cap ........................................ 2, 166 Border ..................................................105 Brightness ..........................................152 Buffering ........................................ 48, 54 Built-in AF assist ...............................136 Built-in flash ........................................ 72 Bulb ........................................................ 38 C Calendar ........................................ 83, 87 Calendar playback ............................ 83 Capture NX 2 ..................122, 155, 166 CEC .......................................................101 Center-weighted (Metering) .......124 Change theme .................................115 Charging a battery ............................ 11 Clock ......................................18, 19, 162 Clock battery ....................................... 19 Close up ................................................ 23 Color space ........................................126 Color temperature ..........................148 Compatible lens ..............................165 Computer ............................................. 91 Continuous AF ..................................129 Contrast .................................... 127, 152 Creating short movies .............. 97, 98 Creative mode .................................... 31 Crop ........................................... 105, 113 Custom Picture Control ....... 151, 154 D n 210 Date and time ............................18, 162 Date format ................................18, 162 Daylight saving time ...............18, 162 DCF version 2.0 ...................... 126, 206 Defaults ..............................................180 Delete ........................ 28, 51, 56, 66, 85 Delete all images .............................. 85 Delete selected images .................. 85 Detailed display .......................... 4, 159 Detailed photo information .80, 160 Digital Print Order Format ...........206 Display ................................................159 Display brightness ..........................159 D-Lighting .........................................111 DPOF ................................104, 106, 206 DPOF print order ................... 104, 106 Dust shield .............................. 171, 172 E Easy panorama ........................... 33, 41 Edit movie ..........................................114 Electronic VR .....................................129 Exif version 2.3 ....................... 126, 206 Exposure ........................... 71, 119, 124 Exposure compensation ................ 71 Exposure indicator ........................... 38 Exposure mode ...............................119 Eye-Fi ...................................................168 F Face priority ...............................24, 136 Face-priority zoom .........................114 File format .........................................124 Fill flash ................................................. 74 Filter effects ............................ 152, 153 Fine-tuning white balance ..........145 Firmware version ............................164 Flash ..............................................72, 137 Flash compensation .......................137 Flash mode .......................................... 73 Flash range .......................................... 75 Flash-ready indicator ....................... 72 Flexible program ............................... 34 Flicker reduction .............................161 Focal length ................................. 24, 80 Focal length scale ....................24, 199 Focal plane mark ........................2, 133 Focus ..........................................129, 134 Focus area .................................. 22, 134 Focus lock .......................................... 135 Focus mode ...................................... 129 Format ......................................... 14, 158 Format memory card ............. 14, 158 Frame rate .........................79, 140, 141 FT1 ....................................................... 202 Full-frame playback ...................27, 79 Full-time AF ...................................... 129 G Grid display ............................................ 5 H H.264 ................................................... 195 HD movies ........................... 57, 58, 141 HDMI ..........................................100, 206 HDMI device control ..................... 101 HDMI-CEC ......................................... 101 HDR ........................................................40 High definition .......................100, 206 High ISO noise reduction ............ 156 Histogram ............................................81 Hue ...................................................... 152 I Image processing menu .............. 143 Image quality ................................... 120 Image review ................................... 110 Image selection .............................. 109 Image size ......................................... 120 Index print ........................................ 104 ISO sensitivity .................................. 149 J JPEG ..................................................... 120 L Landscape .................................. 23, 150 Language ................................... 18, 162 Lens .................... 16, 24, 128, 165, 197 Lens cap ............................................. 200 Lens mount .......................................133 Live image control ............................ 25 Load from/save to card .................155 Long exposure NR ..........................128 M Manual ...........................32, 37, 57, 119 Manual focus ....................................132 Matrix (Metering) ............................124 Maximum aperture .............. 197, 198 Memory card ...13, 15, 158, 167, 181 Memory card access lamp ............. 22 Memory card capacity ..................181 Metering .............................................124 Microphone ...............................59, 142 Miniature effect ................................. 33 Mode dial ................................................6 Monitor .......................................... 4, 159 Monochrome ....................................150 Motion Snapshot mode .................. 53 Mount adapter ....................... 165, 202 MOV ..................................122, 124, 183 Movie before/after .........................123 Movie menu ......................................139 Movie settings ..................................141 Movie sound options .....................142 Movie-record button . 29, 44, 57, 59, 63 Movies ............................29, 44, 57, 141 Multi selector .........................................7 N NEF ............................................. 120, 122 NEF (RAW) ................................ 120, 122 Neutral ................................................150 Night landscape ......................... 23, 32 Night portrait .............................. 23, 33 Nikon Transfer 2 ................................. 95 NMS ...................................122, 124, 183 Normal panorama ................ 121, 182 Number of shots saved .................123 n 211 O Rotate tall ..........................................110 Optical VR ..........................................128 S P Saturation ..........................................152 Scene auto selector ........................119 Scene selection .................................. 32 SD card ...............................................167 Select images for printing ...........104 Selective color .................................... 33 Self-timer ...................................... 67, 69 Sensitivity ..........................................149 Setup menu ......................................157 Sharpening ........................................152 Shooting menu ................................117 Short Movie Creator ........... 91, 97, 98 Shutter button AE lock .................161 Shutter speed .............................. 35, 37 Shutter-priority auto 32, 35, 57, 119 Shutter-release button .... 22, 23, 46, 48, 54, 161 Single AF ............................................129 Single frame ........................................ 67 Single-point ......................................134 Size ................. 112, 120, 141, 191, 195 Slide show ........................................... 87 Slot empty release lock .................159 Slow motion ..............................62, 140 Slow sync ............................................. 74 Slow view ............................................. 45 Smart Photo Selector ...................... 47 Soft ......................................................... 33 Sound settings .................................160 Speaker ....................................................3 Spot (Metering) ...............................124 sRGB .....................................................126 Standard .............................................150 Strap ...................................................... 11 Subject tracking ..............................134 System requirements ...................... 93 Photo information ............................ 79 PictBridge ................................. 102, 206 Picture Control ....................... 150, 154 Pixel mapping ..................................164 Playback ........................................ 27, 79 Playback menu .................................107 Playback zoom ................................... 84 Portrait .........................................23, 150 Power connector ................... 165, 169 Power drive zoom switch ............... 24 Power switch ....................................... 17 Preset manual ......................... 144, 146 Press the shutter-release button all the way down ............................ 22, 23 Press the shutter-release button halfway ......................................... 22, 23 Print date ............................................106 Print DPOF print order ...................104 Printing ...............................................102 Programmed auto ......32, 34, 57, 119 Protect .................................................110 Q Quick adjust ......................................152 R n 212 Rating ...........................................86, 110 Rear-curtain sync .............................. 74 Red-eye reduction ............................ 74 Removing the lens from the camera 200 Reset file numbering .....................161 Reset movie options ......................140 Reset processing options .............144 Reset setup options .......................158 Reset shooting options .................119 Resize ...................................................112 Retractable lens barrel button .... 16, 17, 199 T Television ...........................................100 Temperature warnings ....................xvi Theme ......................................... 55, 115 Thumbnail playback .........................82 Time ............................................. 18, 162 Time stamp ....................................... 105 Time zone .......................................... 162 Time zone and date ....................... 162 Timer ......................................................67 Toning .......................................152, 153 Trimming movies ........................... 114 U USB ........................................ 76, 95, 102 USB cable ................................... 95, 102 V ViewNX 2 ..............................................91 Vivid .................................................... 150 Volume ...........................................65, 89 VR ......................................................... 128 W Waterproof case .....................144, 165 White balance .................................. 144 Wide panorama .....................121, 182 Wind noise reduction ................... 142 Wireless mobile adapter ....... 76, 166 Z Zoom guide .........................................24 Zoom ring .................................. 24, 199 n 213 No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. SB2L01(11) 6MVA4411-01
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes Create Date : 2012:12:12 22:46:21Z Author : Nikon Corporation Creator : FrameMaker 7.2 Title : Modify Date : 2017:10:26 00:47:02Z Producer : 3-Heights(TM) PDF Optimization Shell 4.8.25.2 (http://www.pdf-tools.com) Page Count : 234 Page Mode : UseOutlines Page Layout : SinglePageEXIF Metadata provided by EXIF.tools