OLYMPUS XA Instruction Manual
Olympus XA instruction manual Olympus XA instruction manual
User Manual: Olympus XA instruction manual
Open the PDF directly: View PDF 
.
Page Count: 24
| Download | |
| Open PDF In Browser | View PDF |
INSTRUCTIONS DESCRIPTION OF CONTROLS Self-Timer/Battery Check Beeper Non-Slip Finger Grip Rewind Crank Rangefinder Window Exposure Counter Shutter Release (Side View) Rewind Knob/ Camera Back Release Film Winder Dust Barrier Self-Timer/ Battery Check Lamp Strap Eyelet Flash Guide Pin Hole Flash Retaining Socket Viewfinder Aperture Lever Distance Scale Window 1 CdS Light Sensor ASA Film Speed Lever Lens Focusing Lever X-Synchro Contacts Film Rewind Shaft Film Chamber Charge Lamp Sprocket ASA Film Speed Window Film Take-Up Spool Film Speed Adjustment Lever Auto Flash Sensor Flashtube Flash Diffuser Window Flash Clamping Screw Battery Chamber Control Lever Tripod Socket Film Pressure Plate Camera Back Rewind Release Button 2 TABLE OF CONTENTS The Olympus XA is an aperture priority auto-exposure rangefinder camera setting new standards for function and feel, appearance and performance. Please read the following pages carefully and your new camera will provide maximum performance and satisfaction. 3 DESCRIPTION OF CONTROLS . . . . . . . . . . . . . . Page 1•2 PREPARATION Installing the Batteries . . . . . . . . . . . . . . . . . . . . . 4 Loading the Film . . . . . . . . . . . . . . . . . . . . . . . 5•6 SIMPLE STEPS FOR TAKING PICTURES Setting the Aperture . . . . . . . . . . . . . . . . . . . . . . 7 Focusing . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Releasing the Shutter . . . . . . . . . . . . . . . . . . . . . 9 Unloading the Film . . . . . . . . . . . . . . . . . . . . . . 10 Self-Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Automatic Flash Photography . . . . . . . . . . . . . . 11•12 PHOTOGRAPHIC TECHNIQUES Aperture and Depth of Field . . . . . . . . . . . . . . . 13•14 Shutter-Speed Priority Photography . . . . . . . . . . . 15-16 Backlighting Compensation . . . . . . . . . . . . . . . . . . 17 Daylight Synchronization . . . . . . . . . . . . . . . . . . 18 HELPFUL HINTS . . . . . . . . . . . . . . . . . . . . . . . . . . 19 CARE AND STORAGE . . . . . . . . . . . . . . . . . . . . . . . 20 MAIN SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . 21•22 PREPARATION Installing the Batteries 1. Insert the batteries correctly. SR 44 (EPX-76, MS-76 or equivalent) 2. Check the batteries. Set the control lever to "CHECK". The beeper emits a tone and the check lamp glows brightly. If the beeper doesn't signal, the batteries are inserted incorrectly or are exhausted. The batteries will last about one year and must be replaced with two 1.5V silver oxide batteries (SR 44, EPX-76 or equivalent). Do not press the shutter release during battery check operation, or the battery will run down quickly, leaving the shutter opened. Return the lever to the normal position. 4 Loading the Film 1. Open the camera back and insert the film cartridge. (Dust Barrier is in closed position.) 5 Never load the film in direct sunlight. 2. Attach the film end to the take-up spool. The film end must not stick out of the slot excessively. 3. Start winding the film and close the camera back. Film perforations must engage with sprocket teeth and the film must be drawn flat. 4. Open the Dust Barrier. If the Dust Barrier is not fully opened, the released. shutter cannot 5. Wind and expose two blank shots until the exposure counter shows "1". 6. Set the ASA film speed. be The lens should be aimed toward a bright light when shooting. 6 SIMPLE STEPS FOR TAKING PICTURES Setting the Aperture Aperture guideline (ASA 100) (To make full use of aperture control, see pages 13 & 14.) If the shutter speed nee- 1. Open the Dust Barrier and set the aperture lever ( mark) to the F-number required. 7 2. Confirm the shutter speed in the viewfinder, aiming at the subject. (The arrows indicate parallax correction marks.) dle enters the striped, overexposure warning zone, push the aperture lever downward so that the needle points to "500" (1/ 500 sec) or under. If the needle points to "30" (1/30 sec) or under, be careful not to shake the camera. Focusing 3. Looking through the viewfinder, compose and focus. Out of focus In focus Turn the focusing lever until the double image in the central rectangle fuses into one. Focusing can also be done with the knurled mount (e.g. when a tripod is in use). If the subject distance is 0.85 ~ 1 meter (2.8 ~ 3.3 feet), frame the subject in the area under the 2 parallax correction marks. 8 Releasing the Shutter 4. Hold the camera steady and lightly press the shutter release. 9 The release requires a minimum of finger pressure, reducing chance of image blur due to camera shake. Take care not to block the lens, flash diffuser window or auto flash sensor. Unloading the Film Self-Timer Set the control lever to "SELF TIMER" and release the shutter. The beeper emits a tone and the check lamp glows intermittently. The shutter will release after a delay of about 12 sec. The lever also serves as a camera support. To stop the timer midway, return the lever to its normal position. 5. When the film ends, rewind and remove it. Close the Dust Barrier, depress the rewind release button and rewind the film. When the crank turns freely, open the camera back and remove the film in the shade. 10 Automatic Flash Photography (Only the Electronic Flash A11 can be used.) 2. Connect the flash unit to the camera. 1. Set the ASA film speed. If the ASA speed of the film to be used is close to "100" or "400", use the nearest setting. (ASA 80 11 or 125 "100"). 1.5V AA battery (Alkaline preferred) Insert the guide pin into the guide pin hole and turn the clamping screw clockwise. After connecting, do not twist the A11. Maximum distance working 2.5m (8.2 ft.) at ASA 100, 5m (16.4 ft.) at ASA 400. 3. Set the aperture lever to"Flash". 4. When the charge lamp glows, you are ready to fire. The charge lamp pops up and the A11 turns on automatically. The flash setting has been designed to require a stronger pressure than the aperture setting. Do not move the lever once it has been set for auto flash, or in- correct flash exposure may result. 5. At the end of flash photography, fully depress the charge lamp to turn the flash unit off. 12 PHOTOGRAPHIC TECHNIQUES Aperture and Depth of Field Depth of field is the area of acceptable sharpness in front of and behind the subject in focus. The larger the F-number used (from F2.8 to F22), the deeper the depth of field. On the contrary, the smaller the F-number (from F22 to F2.8), the shallower this zone of acceptable sharpness. The table on the opposite page shows that when the camera-tosubject distance is 1m, the depth Making use of "out of focus" background or foreground effects 13 Deep-focus effects of field at F4 ranges from 0.91m to 1.12m. Depth of field table (in meters) Circle of least confusion 1/30 mm. (Camera-to-subject distances with camera's distance scale.) Depth of field table (in feet) Circle of least confusion 1/760 in. are indicated on the 14 Shutter-Speed Priority Photography When photographing fast moving subjects, the impression of movement can be emphasized by intentionally allowing the image to be blurred using a stow shutter speed. On the contrary, the movement can be "frozen" using a fast shutter speed. To emphasize motion 15 To stop movement An aperture-priority auto-exposure camera, the XA lets you select the aperture freely, then automatically sets the right shutter speed for correct exposure. The shutter scale is visible in the viewfinder, so you can pick exactly the speed and aperture you like. Move the aperture lever until the needle points to the shutter speed required. If the shutter speed needle enters the striped zone, push the aperture lever downward so that the needle points to "500" or under. If the needle points to "30" or under, hold the camera steady or support with a tripod; or use a faster shutter speed by pushing the lever upward; or use autoflash. 16 Back Lighting Compensation Before compensation 17 Compensated +1.5EV Turn the lever to "BACK LIGHT When shooting against the light +1.5" and release the shutter. (bright sky, beach, snow, or facing You can get the same effect by a window), the face tends to apreducing the ASA film speed setpear dark on the image. In this ting. case, use the control lever to properly expose the most important area. Daylight Synchronization In situations like these, compensate for the back lighting by using the control lever. Manual flash method is recom- mended for daylight fill-in. Set the A11 film speed lever to "FULL" and the aperture lever to the F-number (after having set to 18 the flash symbol) obtained from the guide number formula. HELPFUL HINTS Dust Barrier Opening the Dust Barrier fully switches the power ON, and all camera functions are ready to shoot. Closing the Dust Barrier switches the power OFF, and all camera functions are locked. Foolproof electronic circuit With the Dust Barrier closed and camera func- tions locked, the foolproof electronic circuit nonetheless allows the camera back to be opened for film loading, unlocking all relat19 ed functions. Electronic feather-touch shutter release The release (pressure conductive polymer) responds to very light pressure. Pressing with a stroke as you normally do with other cameras is not needed. Treat the camera with care! Do not exert stronger pressure on moving parts than needed (Dust Barrier, levers, knobs). When attaching a tripod, care should be taken not to tighten the screw excessively and not to rotate the camera on the screw. Filters cannot be used with the XA. CARE AND STORAGE At the completion of photography, completely close the Dust Barrier to prevent battery drain and dust. Do not drop or hit the camera. Cameras that have been submerged in water are generally irreparable. Do not touch the lens, viewfinder and rangefinder window. If touched, wipe the surface lightly with a clean, soft cotton cloth. Fingerprints, if not wiped off immediately, will eventually be unremovable. Never leave the camera near radios, TV sets, or magnets. Store the camera in a dry, well-ventilated place. Never store the camera where temperatures exceed 50°C (122°F) or below -20°C (-4° F). When you use the camera in temperatures under -10°C (14°F), it may sometimes fail to operate properly. To avoid this, warm the camera before use. Have all repairs performed by an authorized OLYMPUS Service Center. You may send it directly or through the store where your camera was purchased. 20 MAIN SPECIFICATIONS (OLYMPUS XA) Camera type: 35mm rangefinder electronic lens-shutter camera. Shutter release: Electromagnetic feather touch Film format: 35mm standard cassette (24 x 36mm). Lens: F. Zuiko 35mm F2.8, 6 elements in 5 groups. Shutter: Electronic between-lens shutter. Self-timer: Electronic self-timer with 12 second delay. Viewfinder: Bright frame finder, 0.55x. Flash shutter release. Blinking LED and electronic beeper (Piezoelectric Ceramic Vibrator) during self-timer operation. mounting: Exclusive automatic Electronic Shutter speed readout and over-exposure warning Flash A11 attaches to (or detaches from) the cam- zone visible in finder. Focusing: Double-image coupled rangefinder, 0.85m (2.8 ft.) ~ infinity. era in seconds. Setting camera's aperture lever to flash symbol switches the A11 on, and sets the XA for autoflash. Exposure control: Aperture-priority automatic ex- Lens/finder cover: Sliding Dust Barrier. When opened, posure. Automatic shutter speed range 10 sec. to 1/500 sec. Backlighting compensation + 1.5EV. Film speed range: ASA 25 ~ 800. Aperture range: F2.8 ~ F22. Film advance: Rear winding thumbwheel. Exposure counter: Progressive type with automatic reset. 21 Film rewind: Crank type with rewind release button. power is switched on and shutter release unlocks. When closed, power is switched off and shutter release locks. Power source: Two 1.5V silver oxide batteries SR 44 (Eveready EPX-76 or equivalent). Dimensions: 102 (W) x 64.5 (H) x 40 (D) mm (4" x 2.54" x 1.6"). Weight: 225 grams or 7.9 oz. (less batteries). MAIN SPECIFICATIONS (ELECTRONIC FLASH A11) Unit type: Automatic electronic flash unit exclusively for use with Olympus X A and XA2. Connection to camera: Fitted onto left-hand edge of Guide number: 10 (ASA 100, meters) or 33 (ASA Power switch: The flash unit is activated by setting 100, feet). Applicable ASA film speeds: ASA 100 and 400. Flash modes: Normal auto (XA, X A 2 ) and manual mode ( X A only) with switch lever. F stop for auto flash: F4 Angle of coverage: Picture area of 35mm focal-length lens. ( X A and XA2 utilize 35mm Zuiko lens.) Number of flashes: Approx. 150 with AA 'penlight' alkaline battery. Recycling time: Approx. 7 sec with AA alkaline battery. XA ( X A 2 ) . camera's lever to flash symbol, popping up the charge lamp and initiating electrical charge. The flash unit turns off when the charge lamp is pressed down. Power source: One 1.5V AA 'penlight' battery (including Ni-Cd battery). Dimensions: 60 ( H ) x 36 ( W ) * x 33 (D) mm (2.4" x 1.4" x 1.3"). * Measured from interface. Weight: 65 grams or 2.3 oz. (less battery). Max. working distance: 2.5m (8.2 ft.) at ASA 100, 5m (16.4 ft.) at ASA 400. 22 OLYMPUS OPTICAL CO., LTD San-Ei Building, 22-2, Nishi Shinjuku 1-chome, Shinjuku-ku, Tokyo, Japan. Tel. 03-3340-2211 OLYMPUS CAMERA CORPORATION Crossways Park, Woodbury, New York, 11797, U.S.A. Tel. 516-364-3000 OLYMPUS OPTICAL CO. (EUROPA) GMBH Postfach 104908, Wendenstrasse 14-16, 20097 Hamburg, Germany. Tel. 040-237730 OLYMPUS OPTICAL CO. (U.K.) LTD. 2-8 Honduras Street, London EC1Y OTX, United Kingdom. Tel. 0171-253-2772 Printed in Japan IELEE22 © 0382·37MS
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Create Date : 2001:08:01 10:55:21 Producer : Acrobat Distiller 4.05 for Windows Creator : AdobePS5.dll Version 5.1.1 Title : OLYMPUS XA Modify Date : 2001:08:03 14:00:08-07:00 Subject : Instructions Author : Olympus America Page Count : 24 Page Mode : UseOutlinesEXIF Metadata provided by EXIF.tools