Configuration Guide Open Stack Cinder Driver
User Manual:
Open the PDF directly: View PDF
Page Count: 59
- Contents
- 1 Overview
- 2 Version Mappings
- 3 Cinder Driver Installation&deployment
- 4 Cinder Driver Basis Properties Configuration
- 4.1 Configuring the Cinder Driver for iSCSI Storage
- 4.1.1 Configuring the Cinder Driver for OceanStor T Series V1 (iSCSI)
- 4.1.2 Configuring the Cinder Driver for OceanStor T Series V2 (iSCSI)
- 4.1.3 Configuring the Cinder Driver for OceanStor V3/V5(iSCSI)
- 4.1.4 Configuring the Cinder Driver for OceanStor 18000 Series(iSCSI)
- 4.1.5 Configuring the Cinder Driver for Dorado Series V3(iSCSI)
- 4.1.6 Parameters in the Configuration File
- 4.1.7 Configuring iSCSI Multipathing
- 4.1.8 Configuring CHAP and ALUA
- 4.2 Configuring the Cinder Driver for Fibre Channel Storage
- 4.2.1 Configuring the Cinder Driver for OceanStor T Series V1 (Fibre Channel)
- 4.2.2 Configuring the Cinder Driver for OceanStor T Series V2 (Fibre Channel)
- 4.2.3 Configuring the Cinder Driver for OceanStor V3/V5 (Fibre Channel)
- 4.2.4 Configuring the Cinder Driver of OceanStor 18000 Series (Fibre Channel)
- 4.2.5 Configuring the Cinder Driver for Dorado Series V3(Fibre Channel)
- 4.2.6 Configuring the Auto Zoning
- 4.2.7 Parameters in the Configuration File
- 4.2.8 Configuring FC Multipathing
- 4.2.9 Configuring ALUA
- 4.3 Configuring Multi-Storage Support
- 4.4 Using tenant user
- 4.1 Configuring the Cinder Driver for iSCSI Storage
- 5 Cinder Driver Advanced Properties Configuration
- 5.1 Configuring the SmartQoS Property
- 5.2 Configuring the SmartPartition Property
- 5.3 Configuring the Thick Property
- 5.4 Configuring the Thin Property
- 5.5 Configuring the SmartCache Property
- 5.6 Configuring the SmartTier Property
- 5.7 Configuring the HyperMetro Property
- 5.8 Configuring the Replication V2.1
- 5.9 Create a volume on a certain storage pool
- 5.10 Create a volume with a certain disk type
- 5.11 Create a volume on a certain volume back end
- 5.12 Configuring Consistency Groups
- 5.13 Configuring Backup Snapshot
- 5.14 Configuring Certificate Verify
- 5.15 Configuring the Owning Controller of a LUN
- 5.16 Configuring the SmartDedupe Property
- 5.17 Configuring the SmartCompression Property
- 5.18 Create a volume with fast clone
- 5.19 Configuring the LUN Copy Speed
- 6 Best Practices
- 7 FAQ