Oracle Fusion Middleware Installation Guide For Identity Management
User Manual:
Open the PDF directly: View PDF
Page Count: 408 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Contents
- Preface
- Part I Introduction and Preparation
- 1 Understanding Oracle Identity Management
- 1.1 What is Oracle Fusion Middleware?
- 1.2 What is Oracle Identity Management?
- 1.3 Oracle Identity Management 11g Release 1 (11.1.1.6.0) Components
- 1.4 Oracle Identity and Access Management 11g Release 1 (11.1.1.5.0) Components
- 1.5 What Does This Guide Cover?
- 1.5.1 Using This Guide
- 1.5.2 Upgrading to Oracle Identity Management (11.1.1.6.0)
- 1.5.3 Upgrading to Oracle Identity and Access Management (11.1.1.5.0)
- 1.5.4 Installing Oracle Identity Management (11.1.1.6.0) for High Availability
- 1.5.5 Installing Oracle Identity and Access Management (11.1.1.5.0) for High Availability
- 2 Understanding the Oracle Identity Management Installation
- 2.1 Overview and Structure of Oracle Identity Management 11g Installation
- 2.2 Overview of Oracle Identity Management (11.1.1.6.0) Installation
- 2.2.1 Installation Roadmap
- 2.2.2 Installation Types: "Install Software - Do Not Configure" vs. "Install and Configure"
- 2.2.3 Understanding Oracle WebLogic Server Administration Domain Options
- 2.2.4 Installing Components on Separate Systems
- 2.2.5 Executing the oracleRoot.sh Script on UNIX Platforms
- 2.2.6 Understanding the State of Oracle Identity Management Components After Installation
- 2.3 Overview of Oracle Identity and Access Management (11.1.1.5.0) Installation
- 2.3.1 Installation Roadmap
- 2.3.2 Prerequisite Checks Performed by the Oracle Identity and Access Management Installer
- 2.3.3 Understanding Oracle WebLogic Server Administration Domain Options
- 2.3.4 Additional Configuration Using the Oracle Identity Manager 11g Configuration Wizard
- 2.3.5 Additional 11g Release 1 (11.1.1) Deployment Information
- 2.3.6 Silent Installation
- 2.3.7 Installing Components on Separate Systems
- 2.3.8 Screens in Oracle Fusion Middleware Configuration Wizard
- 2.3.9 Understanding the State of Oracle Identity and Access Management Components After Installation
- 3 Preparing to Install
- 3.1 Before Installing Oracle Identity Management (11.1.1.6.0)
- 3.1.1 Reviewing System Requirements and Certification
- 3.1.2 Understanding Oracle Fusion Middleware Support of 64-bit JDK
- 3.1.3 Installing and Configuring Java Access Bridge (Windows Only)
- 3.1.4 Managing the Oracle WebLogic Server Node Manager Utility for Oracle Identity Management Installations
- 3.1.5 Optional Environment-Specific Preparation
- 3.2 Before Installing Oracle Identity and Access Management (11.1.1.5.0)
- 3.2.1 Reviewing System Requirements and Certification
- 3.2.2 Installing and Configuring Java Access Bridge (Windows Only)
- 3.2.3 Obtaining the Latest Oracle WebLogic Server and Oracle Fusion Middleware 11g Software
- 3.2.4 Installing Oracle WebLogic Server and Creating the Oracle Middleware Home
- 3.2.5 Installing Oracle Database
- 3.2.6 Creating Database Schema Using the Oracle Fusion Middleware Repository Creation Utility (RCU)
- 3.2.7 Upgrading an Existing Database Schema
- 3.2.8 Installing the Latest Version of Oracle SOA Suite (Oracle Identity Manager Users Only)
- 3.1 Before Installing Oracle Identity Management (11.1.1.6.0)
- 4 Performing Common Installation Tasks
- 4.1 Common Installation Tasks for Oracle Identity Management (11.1.1.6.0)
- 4.2 Common Installation Tasks for Oracle Identity and Access Management (11.1.1.5.0)
- 4.2.1 Starting an Installation
- 4.2.2 Starting Oracle Fusion Middleware Configuration Wizard
- 4.2.3 List of Executable Files
- 4.2.4 Identifying Installation Directories
- 4.2.5 Determining Port Numbers
- 4.2.6 Completing an Installation
- 4.2.7 Locating Installation Log Files
- 4.2.8 Optional: Updating the WebLogic Administrator Server User Name in Oracle Enterprise Manager Fusion Middleware Control (OIM Only)
- 5 Evaluating Single Sign-On Installations
- 1 Understanding Oracle Identity Management
- Part II Installing and Configuring Oracle Identity Management (11.1.1.6.0)
- 6 Installing and Configuring Oracle Identity Management (11.1.1.6.0)
- 6.1 Important Notes Before You Begin
- 6.2 Installing Oracle Identity Management Using "Install and Configure" Option
- 6.2.1 Obtaining the Oracle Fusion Middleware Software
- 6.2.2 Installing Oracle Database
- 6.2.3 Creating Database Schema Using the Oracle Fusion Middleware Repository Creation Utility (RCU)
- 6.2.4 Required Installation Privileges for Oracle WebLogic Server and Oracle Identity Management on Windows Operating Systems
- 6.2.5 Installing Oracle WebLogic Server 11g Release 1 (10.3.6) and Creating the Middleware Home
- 6.2.6 Creating the Inventory Directory (UNIX Only)
- 6.2.7 Starting an Installation
- 6.2.8 Installing and Configuring Oracle Identity Management 11g Release 1 (11.1.1.6.0) Software
- 6.3 Configuring Oracle Identity Management for "Install Software - Do Not Configure" Option
- 7 Configuring Oracle Internet Directory
- 7.1 OID with ODSM and Fusion Middleware Control in a New WebLogic Domain
- 7.2 OID with ODIP, ODSM, and Fusion Middleware Control in a New WebLogic Domain
- 7.3 OID and OVD with ODSM in a New WebLogic Domain
- 7.4 Only OID in an Existing WebLogic Domain
- 7.5 Only OID Without a WebLogic Domain
- 7.6 Verifying OID Installation
- 7.7 Getting Started with OID After Installation
- 8 Configuring Oracle Virtual Directory
- 9 Configuring Oracle Directory Integration Platform
- 9.1 Prerequisites
- 9.2 Configuring ODIP with Oracle Internet Directory (OID)
- 9.3 Configuring ODIP with Oracle Unified Directory (OUD)
- 9.4 Configuring ODIP with Oracle Directory Server Enterprise Edition (ODSEE)
- 9.5 Verifying ODIP
- 9.6 Getting Started with ODIP After Installation
- 10 Configuring Oracle Directory Services Manager
- 11 Configuring Oracle Identity Federation
- 11.1 Using the Information in This Chapter
- 11.2 Understanding OIF Deployments
- 11.3 Understanding OIF Basic and Advanced Deployments
- 11.4 Configuring Oracle HTTP Server for OIF
- 11.5 Performing Basic Oracle Identity Federation Configurations
- 11.6 Performing Advanced Oracle Identity Federation Configurations
- 11.7 Advanced Example: Configuring OIF with OID in a New WebLogic Domain for LDAP Authentication, User Store, and Federation Store
- 11.8 Advanced Example: Configuring OIF in a New or Existing WebLogic Domain with RDBMS Data Stores
- 11.9 Verifying OIF
- 11.10 Getting Started with OIF After Installation
- 12 Configuring Oracle Unified Directory with Oracle Identity Management 11.1.1.6.0
- 12.1 Before You Begin
- 12.2 Configuring only Oracle Unified Directory (OUD)
- 12.3 Configuring Oracle Unified Directory (OUD) with ODSM
- 12.4 Configuring OUD/ODSM/ODIP/Fusion Middleware Control and OVD/ODSM
- 6 Installing and Configuring Oracle Identity Management (11.1.1.6.0)
- Part III Installing and Configuring Oracle Identity and Access Management (11.1.1.5.0)
- 13 Installing Oracle Identity and Access Management (11.1.1.5.0)
- 14 Understanding Domain Extension Scenarios
- 15 Configuring Oracle Identity Navigator
- 16 Configuring Oracle Identity Manager
- 16.1 OIM Server Configuration Workflow
- 16.2 Important Notes Before You Start Configuring OIM
- 16.3 Creating a new WebLogic Domain for OIM and SOA
- 16.4 Starting the Servers
- 16.5 Configuring OIM Server, Design Console, and Remote Manager
- 16.5.1 Scope of Configuration Using the Oracle Identity Manager 11g Configuration Wizard
- 16.5.2 Scenario 1: Oracle Identity Manager Server and Design Console on Different Machines
- 16.5.3 Scenario 2: Oracle Identity Manager Server and Remote Manager on Different Machines
- 16.5.4 Scenario 3: Oracle Identity Manager Server, Design Console, and Remote Manager on a Single Windows Machine
- 16.6 Before Configuring OIM Server, Design Console, or Remote Manager
- 16.7 Starting the Oracle Identity Manager 11g Configuration Wizard
- 16.8 Configuring OIM Server
- 16.8.1 Appropriate Deployment Environment
- 16.8.2 Components Deployed
- 16.8.3 Dependencies
- 16.8.4 Procedure
- 16.8.5 Completing the Prerequisites for Enabling LDAP Synchronization
- 16.8.6 Running the LDAP Post-Configuration Utility
- 16.8.7 Verifying the LDAP Synchronization
- 16.8.8 Post-Configuration Steps
- 16.8.9 Setting oamEnabled Parameter for Identity Virtualization Library
- 16.8.10 Enabling LDAP Sync after Installing and Configuring OIM Server at a Later Point
- 16.9 Installing and Configuring Only OIM Design Console on Windows
- 16.10 Configuring OIM Design Console
- 16.11 Configuring OIM Remote Manager
- 16.12 Verifying the OIM Installation
- 16.13 Setting Up Integration with OAM
- 16.14 List of Supported Languages
- 16.15 Using the Diagnostic Dashboard
- 16.16 Getting Started with OIM After Installation
- 17 Configuring Oracle Access Manager
- 17.1 Prerequisites
- 17.2 Important Notes Before You Begin
- 17.3 Installing OAM
- 17.4 Oracle Access Manager Domain Configuration Template
- 17.5 OAM in a New WebLogic Domain
- 17.6 OAM and OIN in a New WebLogic Domain
- 17.7 OAM in a Domain Containing OAAM and OIN
- 17.8 Starting the Servers
- 17.9 Optional Post-Installation Tasks
- 17.10 Verifying the OAM Installation
- 17.11 Setting Up OAM Agents
- 17.12 Setting Up Integration with OIM
- 17.13 Getting Started with OAM After Installation
- 18 Configuring Oracle Adaptive Access Manager
- 18.1 Overview
- 18.2 Prerequisites
- 18.3 Important Notes Before You Begin
- 18.4 Installing OAAM
- 18.5 OAAM in a New WebLogic Domain
- 18.6 Configuring Oracle Adaptive Access Manager (Offline)
- 18.7 Starting the Servers
- 18.8 Post-Installation Steps
- 18.9 Verifying the OAAM Installation
- 18.10 Migrating Policy and Credential Stores
- 18.11 Getting Started with OAAM After Installation
- 19 OAM and OAAM Joint Domain Configuration Scenarios
- 19.1 Prerequisites
- 19.2 Important Notes Before You Begin
- 19.3 Installing Oracle Identity and Access Management 11g Release 1 (11.1.1)
- 19.4 OAM, OIM, and OIN in a New WebLogic Domain
- 19.5 OAM, OAAM, and OIN in a New WebLogic Domain
- 19.6 Starting the Servers
- 19.7 Getting Started with OAM After Installation
- 19.8 Getting Started with OAAM After Installation
- 20 Installing and Configuring Oracle Entitlements Server
- 20.1 Overview of Oracle Entitlements Server 11g Installation
- 20.2 Installing Oracle Entitlements Server Administration Server
- 20.2.1 Prerequisites
- 20.2.2 Procedure
- 20.2.2.1 System Requirements and Certification
- 20.2.2.2 Obtaining the Oracle Fusion Middleware Software
- 20.2.2.3 Installing Oracle WebLogic Server and Creating the Oracle Middleware Home
- 20.2.2.4 Installing Oracle Database (Recommended)
- 20.2.2.5 Creating a Schema for Oracle Entitlement Server
- 20.2.2.6 Starting the Installer
- 20.2.2.7 Installation Screens and Instructions
- 20.2.2.8 Verifying Oracle Entitlements Server Installation
- 20.3 Configuring Oracle Entitlements Server Administration Server
- 20.4 Installing Oracle Entitlements Server Client
- 20.5 Configuring Oracle Entitlements Server Client
- 20.6 Getting Started with Oracle Entitlements Server After Installation
- 21 Migrating from Domain Agent to Oracle HTTP Server 10g Webgate for OAM
- 21.1 Installing and Configuring Oracle HTTP Server 11g (11.1.1.5.0)
- 21.2 Provisioning Oracle HTTP Server 10g Webgate for OAM Profile
- 21.3 Installing Oracle HTTP Server 10g Webgate for OAM
- 21.4 Configuring mod_weblogic
- 21.5 Optional: Configuring Host Identifier
- 21.6 Updating OIM Server Configuration
- 21.7 Optional: Disabling Domain Agent
- 21.8 Optional: Updating Oracle Identity Manager Configuration
- 22 Installing and Configuring Oracle HTTP Server 11g Webgate for OAM
- 22.1 Installation Overview
- 22.2 Preparing to Install Oracle HTTP Server 11g Webgate for Oracle Access Manager
- 22.2.1 Oracle Fusion Middleware Certification
- 22.2.2 Installing and Configuring OAM 11g
- 22.2.3 Installing and Configuring Oracle HTTP Server 11g
- 22.2.4 Installing Third-Party GCC Libraries (Linux and Solaris Operating Systems Only)
- 22.2.5 Prerequisites for 64-Bit Oracle HTTP Server 11g Webgates on Windows 2003 and Windows 2008 64-Bit Platforms
- 22.3 Installing Oracle HTTP Server 11g Webgate for Oracle Access Manager
- 22.4 Post-Installation Steps
- 22.5 Verifying the Oracle HTTP Server 11g Webgate for Oracle Access Manager
- 22.6 Getting Started with a New Oracle HTTP Server 11g Webgate Agent for Oracle Access Manager
- 23 Lifecycle Management
- Part IV Appendixes
- A Oracle Identity Management 11.1.1.6.0 Software Installation Screens
- A.1 Welcome
- A.2 Install Software Updates
- A.3 Select Installation Type
- A.4 Prerequisite Checks
- A.5 Select Domain
- A.6 Specify Installation Location
- A.7 Specify Security Updates
- A.8 Configure Components
- A.9 Configure Ports
- A.10 Specify Schema Database
- A.11 Specify Oracle Virtual Directory Information
- A.12 Specify OID Administrator Password
- A.13 Select Oracle Identity Federation Configuration Type
- A.14 Specify Oracle Identity Federation Details
- A.15 Installation Summary
- A.16 Installation Progress
- A.17 Configuration Progress
- A.18 Installation Complete
- B Oracle Identity and Access Management 11.1.1.5.0 Software Installation Screens
- C Oracle Identity Manager Configuration Screens
- D Starting or Stopping the Oracle Stack
- E Preconfiguring Oracle Directory Server Enterprise Edition (ODSEE)
- F Deinstalling and Reinstalling Oracle Identity Management
- G Deinstalling and Reinstalling Oracle Identity and Access Management
- H Performing Silent Installations
- I Troubleshooting the Installation
- J OAAM Partition Schema Reference
- K Software Deinstallation Screens
- A Oracle Identity Management 11.1.1.6.0 Software Installation Screens