PAM RTM 2014 User Guide Tutorials
User Manual:
Open the PDF directly: View PDF
Page Count: 464 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- INTRODUCTION
- PAM-RTM USER'S GUIDE
- INTRODUCTION
- PRESENTATION OF THE USER INTERFACE
- FILE MENU
- SELECTION MENU
- GROUPS MENU
- MESH MENU
- VIEW MENU
- PROCESS PARAMETERS
- NUMERICAL PARAMETERS
- FUNCTION EDITOR
- MATERIAL PROPERTIES OF THE RESIN
- MATERIAL PROPERTIES OF THE FIBER REINFORCEMENTS
- MATERIAL PROPERTIES OF SOLIDS
- LAMINATES
- MATERIAL DATABASE
- BOUNDARY CONDITIONS
- NON-COINCIDENT INTERFACES
- SENSORS
- TRIGGER MANAGER
- CURVE VIEWER
- RUNNING THE SIMULATION FROM A COMMAND WINDOW
- TUTORIALS
- CENTRAL INJECTION
- EDGE EFFECTS – RECTANGULAR PLATE
- EDGE EFFECTS – COMPLEX SHAPE
- FIBER ORIENTATIONS
- COMPARISON 2D – 2.5D – 3D
- AIR ENTRAPMENT
- VACUUM ASSISTED RESIN INFUSION (VARI)
- LANDING GEAR
- MESH EXTRUSION
- NON-ISOTHERMAL INJECTION
- CURING OF A PLATE
- CURING OF A PART WITH AN INSERT
- THERMAL CONTACT RESISTANCE
- NON-ISOTHERMAL 3D – FIBERS ORIENTATION
- USER DEFINED FUNCTIONS
- ONE SHOT FILLING SIMULATION
- GENPORTS
- SEQUENTIAL INJECTION (TRIGGER MANAGER)
- VELOCITY OPTIMIZATION
- COMPRESSION RTM
- LOCAL PERMEABILITY FROM DRAPING RESULTS
- LOCAL PERMEABILITY FROM DRAPING RESULTS (ADVANCED)
- PAM-QUIKFORM