Instruction PT200 00 PT20000_000DMI PT20000 000DMI

User Manual: PT20000_000DMI

Open the PDF directly: View PDF .
Page Count: 10

Download
Open PDF In Browser	View PDF

Congratulations on the purchase of your new Prince
Table Tennis table. Our products are designed and
manufactured to give you years of game playing enjoyment.
KEEP BOX AND PACKING MATERIAL UNTIL TABLE
HAS BEEN COMPLETELY ASSEMBLED.
ALL DAMAGE MUST BE REPORTED TO DMI
WITHIN TEN DAYS OF RECEIPT.
If you have any problems with your new product,

PLEASE DO NOT RETURN IT TO THE STORE.
Please contact us:

1.800.399.4402
FAX: 215.283.9573

Please have your model number when inquiring about parts.
Or write to:
DMI Sports
Customer Service
1300 Virginia Drive, Suite 401
Fort Washington PA, 19034
Please visit our web site at:

www.dmisports.com
When contacting DMI Sports, please provide your model number
and item number (if applicable) if requesting a replacement part.
Item numbers can be found inside this owners manual.

PT200-00
Your Model Number _______________________
Your model number is also located on the original carton. These instructions
are also available online at: www.dmisports.com.
0091212

IMPORTANT!
Please Keep Your Instructions! (You will need your Model number should you need to contact us.)
Before attempting assembly, please read through this instruction book to familiarize yourself with all
the parts and assembly steps. We recommend that two adults assemble this game. Please refer to the
Parts Identifier on the following page and be sure that all parts have been included.
This product is manufactured according to the ITTF standards (International Table Tennis Federation),
and includes national and international patents.
DMI Sports Inc. warranties this product for one year from the purchase date for any manufacturing or
material defect. High-density chipboard is warranted for one year from date of purchase. Although we
at DMI Sports are dedicated to giving our customers the highest quality products, occasionally a part
may be missing. If you are missing a part, or if you have any questions, please call our customer service
department at 1.800.399.4402 Mon-Fri between the hours of 9:00am and 5:00pm E.S.T; or you can reach
us at: www.dmisports.com.
Do not return the game to the store. Please contact us first at: 1.800.399.4402 or on our website at:
www.dmisports.com.

TWO ADULTS ARE REQUIRED TO ASSEMBLE
THIS TENNIS TABLE

DMI Sports

-2-

For Customer Service Call 1.800.399.4402

TOOLS REQUIRED FOR ASSEMBLY:
• Phillips Head and Regular Screwdriver (or Electric Screwdriver) Not Included
• Wrench Set or Pliers- Not Included
• Hammer- Not Included
PARTS IDENTIFIER
HARDWARE PARTS
Qty. 4 H2
Qty. 8

H1

TTPH115
TTPHKIT2

H5

Qty. 6

TTPH113
TTPHKIT2

DMI Sports

Qty. 4

H3

TTPH117
TTPHKIT2

H6

Qty. 2

H4

TTPH126
TTPHKIT2

Qty. 12 H7

Qty. 12

TTPH107
TTPHKIT2

TTPH125
TTPHKIT2

-3-

Qty. 4

TTPH129
TTPHKIT2

H8

Qty. 16

TTPH114
TTPHKIT2

For Customer Service Call 1.800.399.4402

PARTS IDENTIFIER

ASSEMBLY PARTS
Qty. 8 P2
Qty. 8

P1

Plastic Wheel
TTPP101

P5

Qty. 2

Wheel Swivel
TTPP102

P6

Net Post Support
TTPM126

P9

Qty. 4 P10

Plastic Tray
TTPP121

P13

Qty. 4 P14

1.5” Half Round Bracket
TTPM115

P17

Qty. 2 P18

Side Apron
TTPM125

DMI Sports

Qty. 2

P3

Qty. 2

Insert for Wheel Swivel
TTPP103

Qty. 2 P7

Qty. 1

Net Post
TTPM127

Safety Catch
TTPP109

Support Brace
TTPM119

P8

P15

Qty. 6

1” Half Round Bracket
TTPM114

Qty. 2 P16

1.5” Outer Leg
TTPM202

Qty. 2

Table Half
TTPW200-00

Qty. 4 P12

1” Plastic Leg Cap
TTPP114

1” Inner Leg
TTPM201

Qty. 2

Qty. 4

Nylon Net
TTPP119

Qty. 4 P11

Qty. 4

P4

Qty. 2

End Apron
TTPM124

Qty. 8 NOTE: Parts P13 and
P15 come pre-assembled to P8. They
are only listed here
as replacement parts
1.5” Plastic Leg Cap should there be a problem with them.
TTPP112

P19

Plastic Corner
TTPP122

-4-

For Customer Service Call 1.800.399.4402

Prince Competitor FSA - Code: PT200-00 - Assembly Instructions
Open the box and position the two play surfaces face down on the cardboard.
Note: Make sure that the two play surfaces are positioned, with the ends of the table possessing
the pre-assembled net support brackets represented in Fig 1.1, facing each other.

STEP 1.

(Fig. 1.1) Attach Inner Legs (P14) using Half Round Bracket (P12) and Screw (H7).

(P15)

Pre-Assembled

(P14)

(P14)
(H7) (H7)

(H7)

(P15)

Pre-Assembled

(H7)
(H7)

(H7)

Note:

FIG. 1.1

DMI Sports

If you notice any resistance in
putting the legs up, carefully
work the legs back-and-forth
until the movement in smooth.

For Customer Service Call 1.800.399.4402

Prince Competitor FSA - Code: PT200-00 - Assembly Instructions

STEP 2.

(Fig. 2.1) Attach two Plastic Wheels (P1) using (H1) and (H2) to both Long Inner legs
(P16) as pictured below. Fig. 2.1 represents both inner legs.

FIG. 2.1
(P1)

(H1)

(P19)
(P15)

FIG. 4.1

(H2)
(P14)

FIG. 3.1
(P1)

(H1)

(P2)

STEP 3.

(H2)

(Fig. 3.1) Attach two Plastic Wheels (P1) using (H1)
and (H2) to the Wheel Brackets (P2) as shown to the left. Once the
wheels are attached, attach the wheels and bracket to the Insert
for wheel swivel (P3).. The entire unit will then be inserted into the
two Inner legs (P14).

(P3)
(P14)

STEP 4.

(Fig. 4.1) Insert the Plastic Leg covers (P19) in the
Outer Legs (P15).. Gently hammer into place if needed.
Fig. 4.1 represents all outer legs.

(H8)

(P9)

(H5)

(H8)

(P4)

(P4)
Support Brace

(P14)
(H5)

(H8)

IMPORTANT
(H4)

(H6)
(H6)

(H4)

(H6)
(H6)

FIG. 5.1

The Support Brace (P4) must
be attached with the raised
side facing out. If placed the
other way, the brace will
damage the table when folded
and void your warranty.

STEP 5.

(Fig. 5.1) Attach the two Plastic Trays (P9) through the lower holes using (H6) and (H8) to the
two Interior legs as shown above.(Repeat on the other side) Secure the top two holes by placing one end of the
Support Brace (P4) over the top holes of the Plastic Tray and attaching them to the Interior Leg using (H6) and
(H8) as shown in FIG. 5.1. Attach the other end of the Support Brace to the Exterior Leg using (H4) and (H5).
Now secure the Plastic Tray by adding two (H4) and (H5) hardware parts.

Note:

Keep in mind that the table is still up-side-down. So the “lower holes” referred to in
Step 5. are closer to the ground in this position.
-5DMI Sports
For Customer Service Call 1.800.399.4402

Prince Competitor FSA - Code: PT200-00 - Assembly Instructions

STEP 6.

Before you turn the table over, attach the two
Net Post Supports (P5) to the holes in the
Side Aprons at this time.

(H8)

(H7)

STEP 7.

(H8)

FIG. 6.1

(P17)

(H7)
(P5)

(Fig. 7.1) Make sure that all hardware is tight. (DO NOT OVER TIGHTEN) With two adults, turn
the table over. Don’t try to pick it up. Roll it over until upright being careful not to let table fold
in half.
STEP 8. (Fig. 8.1) Attach the Safety Catches (P10) to the
Interior legs (P14) using holes just above trays (P9). Screw nut to
Saftey Catch (P10) but do not tighten to legs. These
must be loose enough to swivel.

(P10)

FIG. 8.1

FIG. 7.1

STEP 9.

(Fig. 9.1) Attach the Net Post (P6) to the Net
Post Support (P5) using (H3) and (H5) as shown in FIG. 9.1.
Once the Net Post is secured, you can attach the Nylon Net
(P7). NOTE: the Nylon net may appear too small to reach
the posts. Simply stretch the net until it slides on the posts.

STEP 10.

(Fig. 10) Using Screws
(H9) attach the Plastic Corners (P22) to
the pre-assembled end and side aprons.

(P18)

(H3)
(P6)

(P5)
(P18)

(P15)

(H5)

FIG. 9.1

(P14)

FIG. 10
DMI Sports

-6-

For Customer Service Call 1.800.399.4402

!

RECOMMENDATION OF USE AND PRECAUTIONS

Anyone using or handling this table tennis table must always follow the illustrated instructions attached to the back of the board and be fully aware of the operation instructions.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.

Handling the table, (Assembly, open, close or to store) should always be done by two adults to prevent
accident or injury.
Be sure that no persons or objects are in the way of the boards when opening the table.
Do not put heavy objects on the table.
Do not sit on the table.
Do not clean the table with solvents or any other aggressive product because it could damage
the paint finish.
Do not use sharp objects on the board or painter surface.
If the table is used for purposes other than playing table tennis, cover the surface to prevent any
damage.
Request proof of purchase and keep it during the warranty period.
Under no circumstances is the manufacturer responsible for direct or indirect damages
including loses of benefits or any other commercial damage occurred by the use of the purchased
product.
The functioning and storage of this product should always be supervised by an adult.
Do not store or handle the table on an unstable floor surface.
If safety device malfunction occurs, secure table tops until the problem is solved.
To extend the life of this product, (outdoor table or indoor table) protect it from moisture
or severe climate changes.
Use only the net system supplied. For replacements please contact customer service at: 800.399.4402
and ask for Net Post TTPM126, Net Support TTPM127 and Nylon Net TTPP119.

Care and Maintenance
Cleaning your table
Use a soft damp (not wet) cloth only. DO NOT USE ANY CHEMICALS, ABRASIVE OR CLEANING PRODUCTS on
the playing surface.

Maintenance of your table
All moving parts must be oiled including the pivot points. This will insure ease of use and safety of your table.
This table must be stored indoors to avoid damage to the surface. The dampness and temperature changes can
cause wood to warp, swell or blister.

DMI Sports

-7-

For Customer Service Call 1.800.399.4402

APPLYING LABELS
The very last step in completing the assembly of your new Prince Table Tennis table involves applying
the labels to the proper locations on the table. There are two types of labels to be applied.
#1 is the Style label. There are four style lables. Each of the four labels are applied to the four corners
of the tables side aprons as shown below.
#2 is the Plastic Tray label. There are two tray labels. One of each of these labels will be applied to
each plastic tray on your table.
The labels represented here are not of actual size or color.
Note: It is recommended that you write the model number on the under-side of this table for future
reference.

#1

#2

#1

#2

DMI Sports

-8-

For Customer Service Call 1.800.399.4402

PARTS RE-ORDER FORM

PT200-00 Table Tennis Table

DMI SPORTS

1300 Virginia Drive, Suite 401
Fort Washington, PA 19034
www.dmisports.com

DATE:
NAME:
PHONE:

ADDRESS:
STATE:

CITY:
REF

Send this form along with your
check or money order payable to:

QTY

PART#

DESCRIPTION

H1
H2
H3
H4
H5
H6
H7
H8
P1
P2
P3
P4
P5
P6
P7

TTPHKIT2
TTPHKIT2
TTPHKIT2
TTPHKIT2
TTPHKIT2
TTPHKIT2
TTPHKIT2
TTPHKIT2
TTPP101
TTPP102
TTPP103
TTPM119
TTPM126
TTPM127
TTPP119

TTPH115
TTPH117
TTPH126
TTPH129
TTPH113
TTPH125
TTPH107
TTPH114
Plastic Wheel
Wheel Swivel
Insert for Wheel Swivel
Support Brace
Net Post Support
Net Support
Nylon Net

P9
P10
P11
P12
P13
P14
P15
P16
P17
P18
P19

TTPP121
TTPP109
TTPP114
TTPM114
TTPM115
TTPM201
TTPM202
TTPM124
TTPM125
TTPP122
TTPP112
TTPH128
TTPH124
TTPH123
TT200LABELS

Plastic Tray
Safety Catch
Plastic Leg Cap
1” Half Round Bracket
1.5” Half Round Bracket
1” Inner Leg
1.5” Outer Leg
End Apron
Side Apron
Plastic Corner
1.5” Plastic Leg Cap
#10-24 x 2” Screw
#10-24 Hex Nut
#10-24 x 1.5 Screw

SHIPPING AND HANDLING:
Up to $15.00 add $2.00 for S&H
Over $15.00 CALL

ZIP CODE:
UNIT PRICE

(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)

1.00
1.00
.50
.50
.50
.50
.50
.50
2.50
2.50
.50
10.00
5.00
10.00
9.50

(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
(ea.)
Competitor Label Sheet (1 of 2) (ea.)

7.50
5.00
1.00
3.00
3.00
15.00
15.00
12.00
12.00
3.00
1.00
1.00
1.00
1.00
4.50

Subtotal:
Shipping and Handling Charges:
(PA Residents Add 6% State Sales Tax) TOTAL:

TOTAL AMOUNT



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Create Date                     : 2007:10:08 14:52:32Z
Creator                         : Adobe InDesign CS (3.0.1)
Modify Date                     : 2013:05:21 10:20:32-04:00
Producer                        : Adobe PDF Library 6.0
Trapped                         : False
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2013:05:21 10:20:32-04:00
Creator Tool                    : Adobe InDesign CS (3.0.1)
Rendition Class                 : proof:pdf
Document ID                     : adobe:docid:indd:6c630328-772b-11dc-a0b4-d84b1e7cc872
Instance ID                     : uuid:b010ab70-cddf-4576-a5d1-c89b229d934c
Derived From Instance ID        : 6c630327-772b-11dc-a0b4-d84b1e7cc872
Derived From Document ID        : adobe:docid:indd:5bd268da-6c12-11dc-a245-f4b4cc1ad06e
Format                          : application/pdf
Title                           : Instruction PT200-00.indd
Page Count                      : 10

EXIF Metadata provided by EXIF.tools