FM 2500DD A Parker Sandwich
User Manual: FM 2500DD-A
Open the PDF directly: View PDF 
.
Page Count: 64
| Download | |
| Open PDF In Browser | View PDF |
Sandwich Valves Series CM, CPOM, FM, PRDM, PRM, RM, Z** Catalog HY14-2500/US Introduction B Sandwich valves provide a variety of check, flow control, pressure relief and pressure reducing functions in a compact NFPA D03, D05, D07 and D08 sandwich style valve. The NFPA D03 valve body conforms to the ISO 40 mm (1.57") thickness. These valves are mounted between directional control valves and their mounting surface. The NFPA D03 Sandwich valves may also be used in conjunction with Parker's Cartpak Series of sandwich valves which offer a wide variety of additional functions including relief, pressure reducing/relieving, load check, back pressure check, needle, flow control, pressure compensated flow control, crossover, relief and directional valves. Check Valves Series CM, ZRV • Valve bodies are manufactured from steel which provide extra strength and durability for longer life. Internal hardened steel components also provide longer life. • Positive shut-off is provided by a fully guided poppet and allows full flow in the unchecked position. • Parker CM, ZRV sandwich style check valves can be used either on the 'P', 'A', 'B', 'T' port or combination. • Large internal flow paths allow high flow at low pressure drop. CM*PT CM*AA CM*AAF CM*BB CM*BBF CM*DD CM*DDF CM*PP, ZRV-P CM*TT, ZRV-T CPOM*AA, ZRE-A CPOM*BB, ZRE-B P.O. Check Valves Series CPOM, ZRE • Parker CPOM, ZRE sandwich style, pilot operated check valves can be provided in either single or double configurations. • The pilot operated checks may be positioned in 'A' port or 'B' port; or both 'A' and 'B' ports. • Valve bodies are manufactured from steel which provide extra strength and durability for longer life. Internal hardened steel components also provide longer life. • Large internal flow paths allow high flow at low pressure drop. CPOM*DD, ZRE-AB Parker Sandwich.indd, dd B2 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series CM, CPOM, FM, PRDM, PRM, RM, Z** Catalog HY14-2500/US Introduction Flow Control Valves Series FM, ZRD • Parker FM, ZRD sandwich style flow control valves can be provided in either single or double configurations. The flow controls may be positioned in 'P' port, 'A' port, 'B' port, or both 'A' and 'B' ports. • Valve bodies are manufactured from steel which provide extra strength and durability for longer life. Internal hardened steel components also provide longer life. • Two step needles (standard) provide fine adjustment for the first three turns and course adjustment for the last three turns. Fine metering needles are available as an option on D03 and D05 valves. • Large bypass checks allow high flow at a low pressure drop. • Reversible (invert 180°) for meter-in or meter-out (D03 & D05 only). B FM*AA, ZRD-AA (Meter Out) FM*BB, ZRD-BA (Meter Out) FM*DD, ZRD-ABA (Meter Out) FM*PP (Meter Out) Pressure Reducing Valves Series PRDM • • • • • • PRDM sandwich valves may be selected to reduce pressure in the 'P' port, 'A' port or 'B' port. The direct operated, cushioned piston design results in fast response, low leakage and minimal hysteresis. Up to nine pressure adjustment ranges are available with maximum pressure settings. PRDM*PP Adjustment options include: internal hex screw, hand knob or internal hex with keylock. T P A B M Fluorocarbon and nitrile seals are available for multi-fluid compatibility. PRDM*AA Available gage port connections include SAE, NPT, Metric and BSPP. T P A B T P A B M PRDM*BB M Parker Sandwich.indd, dd B3 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series CM, CPOM, FM, PRDM, PRM, RM, Z** Catalog HY14-2500/US Introduction Pressure Reducing Valves Series PRM, ZDR • B • • Parker PRM, ZDR sandwich style pressure reducing valves can be used to reduce pressure on the 'P' port, the 'A' port, or the 'B' port. Three pressure adjustment options available: slotted screw, knob and locking knob. PRM*AA, ZDR-A Valve bodies are manufactured from steel which provide extra strength and durability for longer life. Internal hardened steel components also provide longer life. PRM*BB, ZDR-B PRM*PP, ZDR-P Pressure Relief Valves Series RM, ZDV • • • Parker RM, ZDV sandwich style relief valve is a 'P' port to 'T' port relief. Valve bodies are manufactured from steel which provide extra strength and durability for longer life. Internal hardened steel components also provide longer life. RM*PT, ZDV-P Three pressure adjustment options available: slotted screw, knob and locking knob. Parker Sandwich.indd, dd B4 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series CM Catalog HY14-2500/US Technical Information General Description Series CM check valves provide an integral, full flow check valve in the pressure 'P' port, 'A' port, 'B' port, or the tank 'T' port of the directional valve. Reverse flow is blocked. The CM2 and CM3 sizes offer a combination P&T check version. B Features • Valve bodies are manufactured from steel which provides extra strength and durability for longer life. Internal hardened steel components also provide longer life. Positive shut-off is provided by a fully guided poppet and allows full flow in the unchecked position. Parker CM sandwich style check valves can be used either on the 'P', 'A', 'B', 'T' ports, or combinations. Large internal flow paths allow high flow at low pressure drop. • • • Specifications CM2 CM3 Mounting Pattern NFPA D03, CETOP 3, NG6 NFPA D05, CETOP 5, NG10 NFPA D08, CETOP 8, NG25 Maximum Pressure 345 Bar (5000 PSI) 345 Bar (5000 PSI) 345 Bar (5000 PSI) Maximum Flow 76 LPM (20 GPM) 113 LPM (30 GPM) 340 LPM (90 GPM) 0.3 Bar (5 PSI), 3 Bar* (45 PSI), 5 Bar* (75 PSI) 0.3 Bar (5 PSI), 3 Bar* (45 PSI), 5 Bar* (75 PSI) 0.3 Bar (5 PSI) Cracking Pressure CM3 Reverse Flow Check PSI Bar 500 34 CM6 75 PSI 400 27 Pressure 45 PSI 300 20 5 PSI 200 14 100 7 0 LPM 0 GPM 37.9 10 18.9 5 56.8 15 Flow * Optional 75 PSI Pressure 400 27 45 PSI 300 20 300 20 75 PSI 200 14 45 PSI 100 200 14 100 7 5 PSI 5 PSI 0 LPM 0 GPM 7 0 LPM 0 GPM 113.6 30 400 27 CM2 Reverse Flow Check Pressure PSI Bar 500 34 94.6 25 CM6 Reverse Flow Check PSI Bar 500 34 Performance Curves 75.7 20 18.9 5 37.9 10 Flow 56.8 15 113.6 30 56.8 15 170.3 45 Flow 227.1 60 283.9 75 340.6 90 VISCOSITY CORRECTION FACTOR 75.7 20 Viscosity (SSU) % of P (Approx.) 75 93 150 111 200 119 250 126 300 132 350 137 400 141 Curves were generated using 100 SSU hydraulic oil. For any other viscosity, pressure drop will change per chart. Parker Sandwich.indd, dd B5 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series CM Catalog HY14-2500/US Ordering Information CM * Check Valve B Code 2 3 6 Size Port Description Code NFPA D03 Subplate Mounting NFPA D05 Subplate Mounting NFPA D08 Subplate Mounting Cracking Pressure Description Code PP* P Port Check PT* P and T Port Checks TT* T Port Check DD A and B Port Checks AA A Port Check BB B Port Check AAF A Port Inverted BBF B Port Inverted DDF A and B Ports Inverted * Not available on 6 size Seal Type Code Omit 5 PSI Y 45 PSI* Z 75 PSI* V N Design Series NOTE: Not required when ordering. Type Fluorocarbon Nitrile * Not available on 6 size. Bold: Designates Tier I products and options. Non-Bold: Designates Tier II products and options. These products will have longer lead times. Manapak Bolt Kits Size "3" Size "2" Sandwich No. of & Valve Sandwich Combination 1 2 3 4 Sandwich & D1 Sandwich & D1 Sandwich & D1 Sandwich & D1 Bolt Kit Bolt Length mm (in) No. of Sandwich Sandwich & Valve Combination D3W-30 D3DW & D31*W* 1 Sandwich & D3 BK141 88.9 (3.50) BK243 73.2 (2.88) 2 Sandwich & D3 BK142 139.7 (5.50) BK225 111.3 (4.38) 3 Sandwich & D3 BK143 190.5 (7.50) BK244 152.4 (6.00) BK245 190.5 (7.50) Bolt Kits must be ordered separately. *D31VW with internal pilot and internal drain only. Size "6" Sandwich & Valve Combination Bolt Length mm (in) Bolt Kit Description 1 Sandwich & D6*VW Valve BK121 1/2 - 13 x 5.25 2 Sandwich & D6*VW Valve BK122 1/2 - 13 x 8.00 3 Sandwich & D6*VW Valve BK123 1/2 - 13 x 10.75 4 Sandwich & D6*VW Valve BK124 1/2 - 13 x 13.50 Note: Bolt Kits must be ordered separately. Qty/ Kit Torque IN-LBS 6 6 6 6 80 80 80 80 Unit Weight: CM2 0.8 kg (1.7 lbs.) CM3 1.8 kg (3.9 lbs.) CM6 7.7 kg (17 lbs.) Schematics AA Option AAF Option BB Option BBF Option DD Option DDF Option PP Option TT Option PT Option Parker Sandwich.indd, dd B6 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series CM2 Catalog HY14-2500/US Dimensions Inch equivalents for millimeter dimensions are shown in (**) 7.0 (0.28) 14.5 (0.57) B T A 45.0 (1.77) B P Top View 70.0 (2.76) 40.0 (1.57) 38.8 (1.53) 3.2 (0.13) 3.2 (0.13) Face View P B A T SHOWN WITHOUT O-RING PLATE Bottom View Note: Transfer the locating pin to the hole on the opposite side of the valve body for 'T' port option. (Invert body 180°) Parker Sandwich.indd, dd B7 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series CM2 Catalog HY14-2500/US Surface Patterns Bottom Views Top Views T P A B B A B T P PP/PT TT T P B A B A P T DD DDF T P B A B A T P BB BBF P T B A B A P T AA AAF Parker Sandwich.indd, dd B8 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series CM3 Catalog HY14-2500/US Dimensions Inch equivalents for millimeter dimensions are shown in (**) 69.9 (2.75) T B T B A P 11.9 (0.47) 19.1 (0.75) Top View 50.0 (1.97) 48.8 (1.92) 92.1 (3.63) Face View SHOWN WITHOUT O-RING PLATE Bottom View Parker Sandwich.indd, dd B9 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series CM3 Catalog HY14-2500/US Surface Patterns Bottom Views Top Views P A B B T T T T B A P TT PP/PT P A B T T T T B A P DD DDF P B A T T T T B A P AA AAF P B A T T T T A B P Parker Sandwich.indd, dd BB BBF B10 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series CM6 Catalog HY14-2500/US Dimensions Inch equivalents for millimeter dimensions are shown in (**) B Top View Face View Bottom View Parker Sandwich.indd, dd B11 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series CM6 Catalog HY14-2500/US Surface Patterns Bottom Views B Top Views T X A T P P A Y DDF T A T P A Y B X AAF P T A T Y P B AA X B X DD X Y B Y B P A Y B X BB BBF Parker Sandwich.indd, dd B12 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series CPOM Catalog HY14-2500/US Technical Information General Description Series CPOM double pilot operated check valves block leakage from the actuator ports to tank when the directional valve is in the center position. NOTE: For max. response and shut off, a directional valve with both cylinder ports drained to tank in the center position is recommended for use with sandwich double pilot operated check valves. B Features • • • • • Parker CPOM sandwich style, p.o. check valves can be provided in either single or double configurations. The p.o. checks may be positioned in 'A' port or 'B' port; or both 'A' and 'B' ports. Valve bodies are manufactured from steel providing extra strength and durability for longer life. Internal hardened steel components also provide longer life. Positive shut-off is provided by a hardened poppet and cage assembly. Large internal flow paths allow high flow at low pressure drop. Specifications Performance Curves CPOM2 Pressure Differential PSI Bar 116 8 87 6 58 4 29 2 free flow CPOM3 CPOM6 Mounting Pattern NFPA D03, CETOP 3, NG 6 NFPA D05, CETOP 5, NG 10 NFPA D08, CETOP 8, NG 25 Maximum Pressure 345 Bar (5000 PSI) 345 Bar (5000 PSI) 205 Bar (3000 PSI) 53 LPM (14 GPM) @ 21 Bar (305 PSI) Pressure Drop 76 LPM (20 GPM) @ 11 Bar (155 PSI) Pressure Drop 227 LPM (60 GPM) @ 24 Bar (350 PSI) Pressure Drop 1.0 Bar (15 PSI) 0.3 Bar (5 PSI) 0.4 Bar (6 PSI) Maximum Flow piloted open 0 LPM 0 GPM CPOM2 Cracking Pressure 12.5 3.3 25 6.6 37.5 9.9 Flow 50 13.2 Pilot Ratio 3:1 3:1 3:1 Leakage 5 DPM 5 DPM CPOM3 PSI Bar PSI 5 DPM CPOM6 Bar 150 10.2 100 Pressure Differential Pressure Differential 300 20.5 6.8 free flow 50 piloted open 3.4 0 LPM 0 GPM 18.9 5 37.9 10 Flow 56.8 15 200 13.6 free flow 100 6.8 piloted open 0 LPM 0 GPM 75.7 20 37.9 10 75.7 20 113.6 30 Flow 151.4 40 189.3 50 227.2 60 Viscosity Correction Factor Curves were generated using 100 SSU hydraulic oil. For any other viscosity, pressure Viscosity (SSU) drop will change as per chart. Percentage of ∆P (Approx.) 75 150 200 250 300 350 400 93 111 119 126 132 137 141 Parker Sandwich.indd, dd B13 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series CPOM Catalog HY14-2500/US Ordering Information CPOM * Size Pilot Operated Check Valve B Code 2 3 6 Poppet Style Description Code NFPA D03 Subplate Mounting NFPA D05 Subplate Mounting NFPA D08 Subplate Mounting DD AA BB Cracking Pressure Description Code Double Poppet A and B Ports A Port Only B Port Only Omit** Seal Type Code 5 PSI N V Y* 45 PSI Z* 75 PSI * Available in size 2 only. ** 15 PSI on CPOM2 Design Series NOTE: Not required when ordering. Type Nitrile Fluorocarbon Bold: Designates Tier I products and options. Non-Bold: Designates Tier II products and options. These products will have longer lead times. Bolt Kits Size "3" Size "2" No. of Sandwich Sandwich & Valve Combination 1 2 3 4 Sandwich & D1 Sandwich & D1 Sandwich & D1 Sandwich & D1 No. of Sandwich Sandwich & Valve Combination Bolt Kit Bolt Length mm (in) 1 2 3 4 Sandwich & D6 Sandwich & D6 Sandwich & D6 Sandwich & D6 BK121 BK122 BK123 BK124 133.4 (5.25) 203.2 (8.00) 273.1 10.75) 342.9 (13.5) Sandwich & Valve Combination 1 2 3 Sandwich & D3 Sandwich & D3 Sandwich & D3 No. of Bolt Length Sandwich mm (in) Bolt Kit BK243 73.2 (2.88) BK225 111.3 (4.38) BK244 152.4 (6.00) BK245 190.5 (7.50) D3W-30 D3DW & D31*W* Bolt Length mm (in) BK141 88.9 (3.50) BK142 139.7 (5.50) BK143 190.5 (7.50) * D31VW with internal pilot and internal drain only. Size "6" Unit Weight: CPOM2D 0.8 kg (1.7 lbs.) CPOM3D 4.4 kg (9.6 lbs.) CPOM6D 9.5 kg (21.0 lbs.) Bolt Kits must be ordered separately. Schematics AA Option BB Option DD Option Parker Sandwich.indd, dd B14 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series CPOM2 Catalog HY14-2500/US Dimensions Inch equivalents for millimeter dimensions are shown in (**) 33.5 (1.32) 7.0 (0.28) B T A B P Top View 45.0 (1.77) 22.5 (0.89) 3.2 (0.13) 3.2 (0.13) 40.0 (1.57) 18.0 (0.71) End View 111.5 (4.39) 129.1 (5.08) Face View P A B T Bottom View Parker Sandwich.indd, dd B15 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series CPOM3 Catalog HY14-2500/US Dimensions Inch equivalents for millimeter dimensions are shown in (**) 46.0 (1.81) B P 11.9 (0.47) A B T T Top View 69.9 (2.75) 38.2 (1.50) 50.0 (1.97) 28.7 (1.13) 146.1 (5.75) End View 165.1 (6.50) Face View Bottom View Parker Sandwich.indd, dd B16 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series CPOM6 Catalog HY14-2500/US Dimensions Inch equivalents for millimeter dimensions are shown in (**) A B x B Y P T Top View 11.1 (0.44) 11.1 (0.44) 114.3 (4.50) 63.5 (2.50) 23.8 (0.94) 69.5 (2.74) 6.4 (0.25) 168.3 (6.62) 6.4 (0.25) Locating pins (2 Places) End View 200.6 (7.90) Face View Bottom View Parker Sandwich.indd, dd B17 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series FM Catalog HY14-2500/US Technical Information General Description Features • • • • • • • FM style flow control valves can be provided in either single or double configurations. The flow controls may be positioned in 'A' port, 'B' port, both 'A' and 'B' ports or 'P' port. Valve bodies are manufactured from steel providing extra strength and durability for longer life. Internal hardened steel components also provide longer life. Two step needles provide fine adjustment for the first few turns and course adjustment for the last few turns. Standard and fine adjustment needles available. Large bypass checks allow high flow at a low pressure drop. Valve is reversible (invert 180°) for meter-in or meter-out applications (FM2 and FM3 only). Adjustment options include Allen hex or hand knob. Specifications Performance Curves FM2 Reverse Flow Check PSI Bar 500 34 Pressure 400 27 Reverse Flow Check 300 20 200 14 100 P 7 0 LPM 0 GPM 7.6 2 1200 FM2 1 2 4 Turns from Closed NFPA D05, CETOP 5, NG 10 NFPA D08, CETOP 8, NG 25 Maximum Pressure 345 Bar (5000 PSI) 345 Bar (5000 PSI) 205 Bar (3000 PSI) Maximum Flow 76 LPM (20 GPM) 113 LPM (30 GPM) 341 LPM (90 GPM) Cracking Pressure 0.3 Bar (5 PSI) 0.3 Bar (5 PSI) 0.3 Bar (5 PSI) PSI Bar 1500 102 6 1200 80 FM6 NFPA D03, CETOP 3, NG 6 Flow FM2 Standard Needle FM3 Mounting Pattern Pressure Drop Reference Chart 2 1 15.1 22.7 30.3 37.9 45.4 53.0 60.6 68.1 75.7 4 12 14 16 18 20 6 8 10 PSI Bar 1500 102 PP DD AA BB P ✽ 1 1 1 A 2 ✽ ✽ 1 B 2 ✽ 1 ✽ T 1 1 1 1 Turns from Closed FM2**D Fine Needle 2 4 8 6 ✽ See specific flow vs. turns 10 80 900 60 600 40 300 20 0 LPM 0 GPM Pressure 8 Pressure B Series FM double flow control valves permit free flow from the directional valve to the actuator and adjustable independent flow regulation in each return line from the actuator (meter-out). The FM2 and FM3 have a seal plate and can be inverted for meter-in applications (see installation drawing for flow direction). 10 12 Full Open 7.6 2 60 600 40 Full Open 300 20 0 LPM 0 GPM 15.1 22.7 30.3 37.9 45.4 53.0 60.6 68.1 75.7 4 12 14 16 18 20 6 8 10 Flow Curves were generated using 100 SSU hydraulic oil @49°C (120°F). For any other viscosity, pressure drop will change as per chart. 900 7.6 2 15.1 22.7 30.3 37.9 45.4 53.0 60.6 68.1 75.7 4 12 14 16 18 20 6 8 10 Flow Viscosity Correction Factor Viscosity (SSU) 75 150 200 250 300 350 400 Percentage of ∆P (Approx.) 93 111 119 126 132 137 141 Parker Sandwich.indd, dd B18 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series FM Catalog HY14-2500/US Ordering Information * FM Flow Valve Control Code Size Meter Option Needles Adjustment Description 2 3 *6 Code NFPA D03 Subplate Mounting NFPA D05 Subplate Mounting NFPA D08 Subplate Mounting Type N V Code S K Design Series NOTE: Not required when ordering. Seal Nitrile Fluorocarbon Type Allen Hex Knob * FM6 - Meter out only Code AA BB DD PP** Description Code Description Single Function A Port Only Single Function B Port Only A and B Ports Dual Function Single Function P Port Omit Standard D* Fine Meter * D needle is the standard needle in valves used as pilot chokes. Not available on size 6. ** Not availabe on size 6. Bold: Designates Tier I products and options. Non-Bold: Designates Tier II products and options. These products will have longer lead times. Bolt Kits Size "2" No. of Sandwich Sandwich & Valve Combination 1 2 3 4 Sandwich & D1 Sandwich & D1 Sandwich & D1 Sandwich & D1 Size "3" Bolt Kit Bolt Length mm (in) BK243 73.2 (2.88) BK225 111.3 (4.38) BK244 152.4 (6.00) BK245 190.5 (7.50) No. of Sandwich Sandwich & Valve Combination 1 2 3 Sandwich & D3 Sandwich & D3 Sandwich & D3 D3W-30 D3DW & D31*W* Bolt Length mm (in) BK141 88.9 (3.50) BK142 139.7 (5.50) BK143 190.5 (7.50) * D31VW with internal pilot and internal drain only. Size "6" No. of Sadnwich & Valve Sandwich Combination 1 2 3 4 Sandwich & D6 Sandwich & D6 Sandwich & D6 Sandwich & D6 Bolt Kit BK121 BK122 BK123 BK124 Bolt Length mm (in) Unit Weight: FM2 1.7 kg (3.8 lbs.) FM3 2.4 kg (5.2 lbs.) FM6 7.9 kg (17.5 lbs.) 133.4 (5.25) 203.2 (8.00) 273.1 (10.75) 342.9 (13.5) Bolt Kits must be ordered separately. Schematics AA Option BB Option DD Option PP Option Parker Sandwich.indd, dd B19 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA B Sandwich Valves Series FM Catalog HY14-2500/US Performance Curves Pressure Drop Reference Chart FM3 Reverse Flow Check PSI Bar 500 34 2 300 20 P 0 LPM0 GPM 37.9 10 18.9 5 94.6 25 75.7 20 56.8 15 Flow FM3 Standard Needle PSI Bar 1500 102 1 2 4 Turns from Closed 8 10 300 20 12 Full Open 37.8 10 18.9 5 56.8 15 Nominal Flow 94.6 25 75.7 20 FM3**D Fine Needle 2 1 3 4 6 Pressure 400 27 600 40 0 LPM0 GPM FM6 Reverse Flow Check PSI Bar 500 34 6 900 60 Pressure T 1 1 1 1 1 113.6 30 1200 80 1200 B 2 ✽ 1 ✽ Reverse Flow Check 7 PSI Bar 1500 102 A 2 ✽ ✽ 1 ✽ See specific flow vs. turns chart 200 14 100 300 20 200 14 100 7 0 LPM 0 GPM 113.6 30 Turns from Closed 38 10 114 30 151 40 189 50 Flow 227 60 265 70 FM6 Standard Needle PSI Bar 1500 102 8 76 20 2 1 303 341 80 90 Turns from Closed 4 3 5 10 80 1200 80 900 6 12 60 14 600 40 300 20 0 LPM 0 GPM Full Open 18.9 5 37.9 10 56.8 15 Flow 75.7 20 94.6 25 113.6 30 Pressure Pressure B Pressure 400 27 P ✽ 1 1 1 PP DD AA BB 900 60 8 10 600 40 12 14 16 Full Open 300 20 0 LPM0 GPM 38 10 76 20 114 30 151 40 189 50 Nominal Flow 227 60 265 70 303 341 80 90 Parker Sandwich.indd, dd B20 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series FM2 Catalog HY14-2500/US Dimensions Inch equivalents for millimeter dimensions are shown in (**) B Note: For meter-in option, invert body 180°. Parker Sandwich.indd, dd B21 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series FM3 Catalog HY14-2500/US Dimensions Inch equivalents for millimeter dimensions are shown in (**) B Note: For meter-in option, invert body 180°. Parker Sandwich.indd, dd B22 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series FM6 Catalog HY14-2500/US Dimensions Inch equivalents for millimeter dimensions are shown in (**) B Parker Sandwich.indd, dd B23 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series PRDM Catalog HY14-2500/US Technical Information General Description B Series PRDM are direct operated pressure reducing valves that are used to regulate pressure in one area of a hydraulic circuit at a predetermined level below normal system pressure. Additionally, an integral pressure relieving function for the secondary reduced pressure circuit is incorporated into the design. Operation These valves are “normally open” devices that allow fluid to flow through the controlled port during their non-actuated or “at rest” condition. When downstream pressure exceeds the value set by the spring force, the control piston moves off its seat, closing off the flow path and thus reducing the fluid passing through from the main system. The cushioned piston modulates to maintain the preset pressure in this branch of the hydraulic circuit. If, due to external forces, the pressure continues to rise in this branch circuit, the piston will keep moving against the spring force allowing fluid to be drained to tank, thereby limiting maximum pressure to the valve’s setting. Specifications Features • • • • • • PRDM2 PRDM3 Mounting Pattern NFPA D03, CETOP 3, NG6 NFPA D05, CETOP 5, NG10 Maximum Operating Pressure P, A, B 350 Bar (5000 PSI) 315 Bar (4560 PSI) T 10 Bar (145 PSI) 10 Bar (145 PSI) Max. Flow 40 LPM (10.5 GPM) 80 LPM (21 GPM) Adjustment options include: internal hex screw, hand knob or internal hex with keylock. Maximum Leakage P-A 15 ml/min (1.0 cu. in.) Fluorocarbon seals are available. Pressure Range Available gage port connections include SAE, NPT, Metric and BSPP. PRDM sandwich valves may be selected to reduce pressure in the 'P' port, 'A' port or 'B' port. The direct operated, cushioned piston design results in fast response, low leakage and minimal hysteresis. Up to nine pressure adjustment ranges are available with maximum pressure settings. Code 01 02* 05** 06* 10** 15** 16* 21 35* Range 1.0 to 14 Bar (15 to 200 PSI) 1.5 to 25 Bar (22 to 363 PSI) 2 to 50 Bar (29 to 725 PSI) 1.5 to 64 Bar (22 to 928 PSI) 4 to 100 Bar (58 to 1450 PSI) 6 to 150 Bar (87 to 2175 PSI) 3 to 160 Bar (44 to 2320 PSI) 8 to 210 Bar (116 to 3045 PSI) 10 to 315 Bar (147 to 4560 PSI) Viscosity Range 12 to 230 cSt / mm²/s (56 to 1066 SSU) Filtration ISO Code 18/16/13 or Better * PRDM2 only ** PRDM3 only. Parker Sandwich.indd, dd B24 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series PRDM Catalog HY14-2500/US Ordering Information PRDM Pressure Reducing/ Relieving Code Size Port Reduction Pressure Range Seal Adjustment Gage Port Design Series NOTE: Not required when ordering. Description 2 3 NFPA D03 Subplate Mounting NFPA D05 Subplate Mounting Code PP AA BB Code N V Code Description L S K P Port Only A Port Only B Port Only Code Code Type Nitrile Fluorocarbon Type N S M G Type 1/4” NPT SAE #4 (UNF-2B 7/16-20) Adapter in PRDM3 Metric 1/4" BSPP Hex w/Key Lock Internal Hex Screw Adj. Knob Description 01 02* 05** 06* 10** 15** 16* 21 35* 1 to 14 Bar 1.5 to 25 Bar 2 to 50 Bar 1.5 to 64 Bar 4 to 100 Bar 6 to 150 Bar 3 to 160 Bar 8 to 210 Bar 10 to 315 Bar (15 to 200 PSI) (22 to 363 PSI) (29 to 725 PSI) (22 to 928 PSI) (58 to 1450 PSI) (87 to 2175 PSI) (44 to 2320 PSI) (116 to 3045 PSI) (147 to 4560 PSI) Bold: Designates Tier I products and options. Non-Bold: Designates Tier II products and options. These products will have longer lead times. * PRDM2 only. ** PRDM3 only. Bolt Kits Size "3" Size "2" No. of Sandwich Sandwich & Valve Combination 1 2 3 4 Sandwich & D1 Sandwich & D1 Sandwich & D1 Sandwich & D1 Bolt Kit Bolt Length mm (in) BK243 73.2 (2.88) BK225 111.3 (4.38) BK244 152.4 (6.00) BK245 190.5 (7.50) No. of Sandwich Sandwich & Valve Combination 1 2 3 Sandwich & D3 Sandwich & D3 Sandwich & D3 D3W-30 D3DW & D31*W* Bolt Length mm (in) BK141 88.9 (3.50) BK142 139.7 (5.50) BK143 190.5 (7.50) * D31VW with internal pilot and internal drain only. Bolt Kits must be ordered separately. Weights: PRDM2 1.3 kg (2.9 lbs.) PRDM3 2.6 kg (5.8 lbs.) Schematics T P A B M T P A T B M PP Option P A B M AA Option BB Option Parker Sandwich.indd, dd B25 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA B Catalog HY14-2500/US Performance Curves Sandwich Valves Series PRDM B NOTE: Lowest pressure setting dependent upon system resistance. Parker Sandwich.indd, dd B26 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Catalog HY14-2500/US Performance Curves Sandwich Valves Series PRDM B NOTE: Lowest pressure setting dependent upon system resistance. Parker Sandwich.indd, dd B27 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series PRDM Catalog HY14-2500/US Dimensions PRDM2 Inch equivalents for millimeter dimensions are shown in (**) B PRDM3 Inch equivalents for millimeter dimensions are shown in (**) Parker Sandwich.indd, dd B28 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series PRM Catalog HY14-2500/US Technical Information General Description Series PRM reducing valves are used to regulate pressure, in one area of a circuit, below normal system pressure. This style valve is well suited to perform this function as it mounts directly below the directional control valve. B Operation These are "normally open" valves that allow fluid to pass through the controlled port during typical operation. When downstream pressure rises above the value set by an adjustable spring force, the control pilot opens and allows the main spool to move from a full open position. The main spool modulates to maintain the desired "reduced pressure" downstream of the valve. The PRM3 also has a relieving mode. Features • • • PRM sandwich style pressure reducing valves can be used to reduce pressure on the 'P' port, the 'A' port, or the 'B' port. Three pressure adjustment options are available: slotted screw, knob and locking knob. (PRM6 only) Valve bodies are manufactured from steel which provide extra strength and durability for longer life. Internal hardened steel components also provide longer life. Specifications PRM3 PRM6 Mounting Pattern NFPA D05, CETOP 5, NG 10 Minimum Pressure 10 Bar (150 PSI) with rated flow, 150 SSU oil, and fluid temperature of 38°C (100°F).1 Maximum Pressure 345 Bar (5000 PSI) 345 Bar (5000 PSI) Min. Flow 3.78 LPM (1 GPM) 3.78 LPM (1 GPM) Maximum Flow 64 LPM (17 GPM) 189 LPM (50 GPM) Pressure Code Range 07 17 25 35 NFPA D08, CETOP 8, NG 25 PRM3/PRM6 Filtration Venting Connecting the vent port to tank allows the reducing valve to divert flow at minimum pressure. Remote Control Remote control valve connected to the vent port can be used to control the pressure.2 Drain Line Pressure Range 10 to 70 Bar (150 - 1000 PSI) 10 to 175 Bar (150 - 2500 PSI) 10 to 250 Bar (150 - 3500 PSI) 10 to 350 Bar (150 - 5000 PSI) ISO 4406 (1999); 18/16/13 (meet NAS 1638:7) Drain line from pilot valve is internally connected to the tank port. Tank line pressure is thus added to the valve setting.3 1 Change in flow, temperature or fluid (SSU) rating will affect valve minimum pressure. 2 Set main valve pressure 10 Bar (150 PSI) higher than remote pilot. 3 It is important that the drain line connection be taken into consideration when determining the minimum valve setting. Parker Sandwich.indd, dd B29 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series PRM Catalog HY14-2500/US Ordering Information * PRM Pressure Reducing Valve B Code 3 6 Size Port Reduction Pressure Range PP AA BB PA AP Gauge Port Description NFPA D05 Subplate Mounting NFPA D08 Subplate Mounting Code Seal Adjustment Code N V Available Models PRM3 PRM6 Description P Port Only ✓ A Port Only ✓ B Port Only ✓ P Port Reduced/Convertible to A Port Reduced A Port Reduced/Convertible to P Port Reduced Code 07 17 25 35 Code K L* S ✓ ✓ ✓ Type Drain Code Type Omit* S† N† M† G SAE SAE NPT Metric 1/4 BSPP Nitrile * PRM6 only. Fluorocarbon † PRM3 only. Type Knob Locking Knob Screw Adj. * PRM6 only. Code Type Omit Y Internal External Unit Weight: PRM3 3.0 kg (6.6 lbs.) PRM6 5.6 kg (12.5 lbs.) Description 10 to 70 Bar (150 to 1000 PSI) 10 to 175 Bar (150 to 2500 PSI) 10 to 250 Bar (150 to 3500 PSI) 10 to 345 Bar (150 to 5000 PSI) Design Series NOTE: Not required when ordering. Bold: Designates Tier I products and options. Non-Bold: Designates Tier II products and options. These products will have longer lead times. Bolt Kits Size "6" Size "3" No. of Sandwich Sandwich & Valve Combination 1 2 3 Sandwich & D3 Sandwich & D3 Sandwich & D3 D3W-30 No. of D3DW & Bolt Length Sandwich D31*W* mm (in) BK141 88.9 (3.50) BK142 139.7 (5.50) BK143 190.5 (7.50) * D31VW with internal pilot and internal drain only. 1 2 3 4 Sandwich & Valve Combination Bolt Kit Bolt Length mm (in) Sandwich & D6 Sandwich & D6 Sandwich & D6 Sandwich & D6 BK121 BK122 BK123 BK124 133.4 (5.25) 203.2 (8.00) 273.1 (10.75) 342.9 (13.5) Bolt Kits must be ordered separately. Schematics VALVE SIDE VALVE SIDE VALVE SIDE SUBPLATE SIDE SUBPLATE SIDE SUBPLATE SIDE AA Option ‘A’ Port Reduced BB Option ‘B’ Port Reduced PP Option ‘P’ Port Reduced PA Option AP Option PRM3 PRM6 Parker Sandwich.indd, dd B30 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series PRM3 Catalog HY14-2500/US Technical Information Performance Curves PSI Bar 500 35 1 300 30 4000 Pressure Drop 25 300 200 20 15 10 2 3 5 4 100 5 0 LPM GPM 30 0 3 12 15 Flow Rate Mode PP AA BB 3000 2000 200 150 100 Minimum Setting 1000 50 LPM 20 GPM 75 18 B 250 0 60 9 6 Pressure Drop 400 Valve will not function in this region PSI Bar 5000 RELIEVING 10 38 A→A 2 2 2 REDUCING 20 75 10 38 30 113 Flow Rate Flow Path P→P 1 1 1 0 0 B→B 3 3 3 Viscosity Correction Factor T→T 4 5 5 Viscosity (SSU) 75 150 200 250 300 350 400 % of ∆P (approx.) 93 111 119 126 132 137 141 Curves were generated using 100 SSU hydraulic oil. For any other viscosity, pressure drop will change per chart. NOTE: Lowest pressure setting dependent upon system resistance. Parker Sandwich.indd, dd B31 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series PRM3 Catalog HY14-2500/US Dimensions PRM3AA Inch equivalents for millimeter dimensions are shown in (**) B Parker Sandwich.indd, dd B32 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series PRM3 Catalog HY14-2500/US Dimensions PRM3BB Inch equivalents for millimeter dimensions are shown in (**) B Parker Sandwich.indd, dd B33 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series PRM3 Catalog HY14-2500/US Dimensions PRM3PP Inch equivalents for millimeter dimensions are shown in (**) B Parker Sandwich.indd, dd B34 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series PRM6 Catalog HY14-2500/US Dimensions Inch equivalents for millimeter dimensions are shown in (**) B Top View End View Face View Bottom View Parker Sandwich.indd, dd B35 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series RM Catalog HY14-2500/US Technical Information General Description Features • • • • RM sandwich style relief valves can be used to limit pressure in the 'P' port, 'A' port, or 'B' port. Valve bodies are manufactured from steel which provide extra strength and durability for longer life. Internal hardened steel components also provide longer life. Three pressure adjustment options are available: slotted screw, knob and locking knob. SAE Gage Port Specifications RM2 Mounting Pattern NFPA D03, CETOP 3, NG 6 RM3 NFPA D05, CETOP 5, NG 10 RM6 Performance Curves NFPA D08, CETOP 8, NG 25 Minimum Pressure 10 Bar (150 PSI) with rated flow, 150 SSU oil, and fluid temperature of 38°C (100°F).1 Maximum Pressure 350 Bar (5000 PSI) 350 Bar (5000 PSI) 350 Bar (5000 PSI) Minimum Flow 3.78 LPM (1 GPM) 3.78 LPM (1 GPM) 3.78 LPM (1 GPM) Maximum Flow 53 LPM (14 GPM) 76 LPM (20 GPM) 341 LPM (90 GPM) PSI Bar 5000 341 4000 273 25 spring Code Pressure Range Pressure Range 07 10 to 70 Bar (150 - 1000 PSI) 17 10 to 175 Bar (150 - 2500 PSI) 25 10 to 250 Bar (150 - 3500 PSI) 35 10 to 350 Bar (150 - 5000 PSI) Filtration ISO 4406 (1999); 18/16/13 (meet NAS 1638:7) Venting Connecting the vent port to tank allows the relief valve to divert flow at minimum pressure.2 Remote Control RM2 Override Characteristics 35 spring Pressure B Series RM relief valves limit system pressure by opening to tank when system pressure reaches the valve setting. With D03 size, they can also be configured to limit the 'A' or 'B' work port pressures independently. 3000 205 17 spring 2000 136 07 spring 1000 68 Min setting 0 LPM 0 GPM 18.9 5 37.9 10 Flow 56.8 15 VISCOSITY CORRECTION FACTOR Viscosity (SSU) % of ∆P (Approx.) Remote control valve connected to the vent port can be used to control the pressure.3 75 93 150 111 200 119 250 126 300 132 350 137 400 141 Curves were generated using 100 SSU hydraulic oil. For any other viscosity, pressure drop will change per chart. 1 Change in flow, temperature or fluid (SSU) rating will affect valve minimum pressure. 2 Not available on Model RM2. 3 Set main valve pressure 10 Bar (150 PSI) higher than remote pilot. Parker Sandwich.indd, dd B36 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series RM Catalog HY14-2500/US Ordering Information * RM Relief Valve Code 2 3 6 Size Port Option Pressure Range Adjustment Description Code NFPA D03 Subplate Mounting NFPA D05 Subplate Mounting NFPA D08 Subplate Mounting N V Code Code Description PT AT* BT* Relief P to T Relief A to T Relief B to T * RM2 only. K L S Code 07 17 25 35 Design Series NOTE: Not required when ordering. Seal Type Nitrile Fluorocarbon Type Knob Locking Knob Slotted Screw with Jam Nut Description Unit Weight: RM2 .95 kg (2.1 lbs.) RM3 3.0 kg (6.6 lbs.) RM6 5.9 kg (13.0 lbs.) 10 to 70 Bar (150 to 1000 PSI) 10 to 175 Bar (150 to 2500 PSI) 10 to 250 Bar (150 to 3500 PSI) 10 to 350 Bar (150 to 5000 PSI) Bold: Designates Tier I products and options. Non-Bold: Designates Tier II products and options. These products will have longer lead times. Bolt Kits Size "3" Size "2" No. of Sandwich Sandwich & Valve Combination 1 2 3 4 Sandwich & D1 Sandwich & D1 Sandwich & D1 Sandwich & D1 Bolt Kit Bolt Length mm (in) BK243 73.2 (2.88) BK225 111.3 (4.38) BK244 152.4 (6.00) BK245 190.5 (7.50) No. of Sandwich Sandwich & Valve Combination 1 2 3 Sandwich & D3 Sandwich & D3 Sandwich & D3 D3W-30 D3DW & D31*W* Bolt Length mm (in) BK141 88.9 (3.50) BK142 139.7 (5.50) BK143 190.5 (7.50) * D31VW with internal pilot and internal drain only. Size "6" No. of Sandwich & Valve Sandwich Combination 1 2 3 4 Sandwich & D6 Sandwich & D6 Sandwich & D6 Sandwich & D6 Bolt Kit BK121 BK122 BK123 BK124 Bolt Length mm (in) 133.4 (5.25) 203.2 (8.00) 273.1 (10.75) 342.9 (13.5) Bolt Kits must be ordered separately. Schematics AT Option BT Option PT Option Parker Sandwich.indd, dd B37 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA B Sandwich Valves Series RM Catalog HY14-2500/US Performance Curves PSI Bar RM3 Override Characteristics PSI Bar RM6 Override Characteristics 25 spring 25 spring 3000 205 17 spring Pressure Pressure 17 spring 2000 136 07 spring 1000 68 2000 136 07 spring 1000 68 Min setting 0 LPM 0 GPM PSI Bar 70 4.8 18.9 5 37.9 10 56.8 15 Flow Min setting 0 LPM 0 GPM 75.7 20 RM3 Vent Flow PSI 60 4.1 95 25 189 50 Flow 284 75 379 100 RM6 Vent Press vs. Flow Bar 150 10.2 Pressure 50 3.4 Pressure B 3000 205 40 2.7 30 2.1 20 1.4 10 100 6.8 50 3.4 .7 0 LPM0 GPM 18.9 5 Flow 37.9 10 0 LPM 0 GPM 56.8 15 25 25 189 50 Flow 284 75 VISCOSITY CORRECTION FACTOR Viscosity (SSU) % of ∆P (Approx.) 75 93 150 111 200 119 250 126 300 132 350 137 400 141 Curves were generated using 100 SSU hydraulic oil. For any other viscosity, pressure drop will change per chart. Parker Sandwich.indd, dd B38 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA 379 100 Sandwich Valves Series RM2 Catalog HY14-2500/US Dimensions Inch equivalents for millimeter dimensions are shown in (**) 169.4 (6.49) 41.4 (1.63) B @Low Pressure 34.8 (1.37) 9.0 (0.35) @Max. Pressure T 7.0 (0.28) A B P 3.5 (0.14) Top View 45.0 (1.77) SAE 4 PT Body Shown Gage Port Location Varies from AT Body and BT Body 40.0 (1.57) 3.2 (0.13) 128.0 (5.04) 170.3 (6.70) @ Max. Pressure 177.0 (6.97) @ Low Pressure 3.2 (0.13) Pilot Cartridge Is Located On The Right Side For PT Body And BT Body End View Face View 88.0 (3.46) 45.2 (1.78) Needed for 26.2 key removal (1.31) P A B T Bottom View Parker Sandwich.indd, dd B39 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series RM3 Catalog HY14-2500/US Dimensions Inch equivalents for millimeter dimensions are shown in (**) 186.6 (7.35) 41.4 (1.63) @ Low Pressure 34.8 (1.37) @ Max. Pressure B T T A B P 72.2 (2.84) 11.9 (0.47) 69.9 (2.75) 45.6 (1.80) 15.9 (0.63) 21.4 VENT 27.8 (0.84) 50.0 (1.09) (1.97) Top View End View 145.3 (5.71) 187.6 (7.39) @Max. Pressure 194.2 (7.65) @Low Pressure Face View 45.2 (1.78) Needed for key removal Bottom View 26.2 (1.31) 88.0 (3.46) GAGE 19.8 (0.78) 93.7 (3.69) SAE 4 Back View Parker Sandwich.indd, dd B40 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series RM6 Catalog HY14-2500/US Dimensions Inch equivalents for millimeter dimensions are shown in (**) B Top View Face View End View Bottom View Parker Sandwich.indd, dd B41 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series ZDR Catalog HY14-2500/US Technical Information General Description Series ZDR pilot operated pressure reducing valves are designed for maximum flow rates. B The reducing function can be located in the ports P, A or B. The sizes NG06 and NG10 are equipped with an integral return flow check valve (reducing function in A or B). ZDR-P01 ZDR-B01 Features • • High flow capacity. Sizes:: – ZDR01 – NFPA D03 / NG6 / CETOP 3 – ZDR02 – NFPA D05 / NG10 / CETOP 5 • With integral return flow check valve. ZDR-B02 Specifications General Size Mounting Interface NG6 NG10 DIN 24340 A6 ISO 4401 NFPA D03 CETOP RP 121 DIN 24340 A10 ISO 4401 NFPA D05 CETOP RP 121 Mounting Position Unrestricted Ambient Temperature Range -20°C to +50°C (-4°F to +122°F) Hydraulic Maximum Operating Pressure up to 350 Bar (5075 PSI); ZDR-AR / BR up to 315 Bar (4568 PSI) Nominal Flow 80 LPM (21.2 GPM) 120 LPM (31.7 GPM) Pilot Oil 0.2 LPM (0.1 GPM) 0.3 LPM (0.1 GPM) Fluid Hydraulic oil as per DIN 51524 ... 51525 Fluid Temperature -20°C to +80°C (-4°F to +176°F) Viscosity 10 to 650 cSt / mm2/s (46 to 3013 SSU) 30 cSt / mm2/s (139 SSU) Permitted Recommended Filtration ISO Class 4406 (1999) 18/16/13 (acc. NAS 1638: 7) Denison Sandwich.indd, dd B42 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series ZDR Catalog HY14-2500/US Technical Information Ordering Information ZDR Pressure Reducing Valve Port Option Size Pressure Range Code Description 01 NFPA D03 / NG6 02 NFPA D05 / NG10 Code Size P 01/02 AR 01/02 BR 01/02 Description Pressure reducing in P with pressure gauge port M Pressure reducing in A with check valve Pressure reducing in B with check valve Code 1 5* S0 D Hexagon Screw with Lock Nut Design Series Description up to 100 Bar (1450 PSI) up to 350 Bar (5075 PSI) Seal Code 1 5 Description Nitrile Fluorocarbon * AR/BR 325 Bar (4568 PSI) Weight: ZDR*01 ZDR*02 ZDR01 ZDR02 Performance Curves ZDR-P/AR/BR01 ZDR-P/AR/BR02 ZDR-P ZDR-AR/BR 1.6 kg (3.5 lbs.) 1.8 kg (4.0 lbs.) 2.9 kg (6.4 lbs.) 3.0 kg (6.6 lbs.) Denison Sandwich.indd, dd B43 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA B Catalog HY14-2500/US Dimensions Sandwich Valves Series ZDR ZDR01 – Inch equivalents for millimeter dimensions are shown in (**) B Seal Kit Seal Order Code 1 098-91184-0 5 098-91185-0 Complete Cartridge Seal Order Code 1 098-91102-0 5 098-91103-0 ZDR02 – Inch equivalents for millimeter dimensions are shown in (**) Seal Kit Seal Order Code 1 098-91182-0 5 098-91183-0 Complete Cartridge Seal Order Code 1 098-91102-0 5 098-91103-0 Denison Sandwich.indd, dd B44 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series ZDV Catalog HY14-2500/US Technical Information General Description Series ZDV pilot operated pressure relief valves are designed for maximum flow rates. The relief function can be located between P and T, A and T, B and T or A and T + B and T for typical pressure relief functions. B For a pre-charge function the ZDV can be ordered with pressure function between A and B + B and A. ZDV-P01 ZDV-B01 Features • • • High flow capacity. Pressure function in P, A, B or A + B. Sizes: – ZDV01 – NFPA D03 / NG6 / CETOP 3 – ZDV02 – NFPA D05 / NG10 / CETOP 5 ZDV-B02 Ordering Information ZDV Pressure Relief Valve Port Option Size Pressure Range Code Description 01 NFPA D03 / NG6 02 NFPA D05 / NG10 Code 1 5* S0 D Hexagon Screw with Lock Nut Design Series Description up to 70 Bar (1015 PSI) up to 350 Bar (5075 PSI) Seal Code 1 5 Description Nitrile Fluorocarbon * ABS 315 Bar (4568 PSI) Code P A B AB ABS Size 01/02 01/02 01/02 01/02 01/02 Description P–T A–T B–T A–T&B–T A–B&B–A Weight: ZDV*01 ZDV*02 One Cartridge 1.6 kg (3.5 lbs.) 3.0 kg (6.6 lbs.) Two Cartridges 2.5 kg (5.5 lbs.) 3.7 kg (8.2 lbs.) Denison Sandwich.indd, dd B45 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series ZDV Catalog HY14-2500/US Technical Information Ordering Information ZDV01 B ZDV02 Specifications General Size Mounting Mounting Position Ambient Temperature Range Hydraulic Maximum Operating Pressure Nominal Flow NG6 NG10 DIN 24340 A6 ISO 4401 NFPA D03 CETOP RP 121 DIN 24340 A10 ISO 4401 NFPA D05 CETOP RP 121 Unrestricted -20° to +50°C (-4°F to +122°F) up to 350 Bar (5075 PSI); ZDV*ABS up to 315 Bar (4568 PSI) 80 LPM (21.2 GPM) Fluid Fluid Temperature Hydraulic oil as per DIN 51524 ... 51525 -20° to +80°C (-4°F to +176°F) Viscosity 10 to 650 cSt / mm2/s (46 to 3013 SSU) 30 cSt / mm2/s (139 SSU) Permitted Recommended Filtration 140 LPM (37.0 GPM) ISO Class 4406 (1999) 18/16/13 (acc. NAS 1638: 7) Denison Sandwich.indd, dd B46 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Catalog HY14-2500/US Performance Curves Sandwich Valves Series ZDV ZDV-AB01 ZDV-P/A/B/ABS01 B ZDV-P/A/B/AB02 ZDV-ASB02 Denison Sandwich.indd, dd B47 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Catalog HY14-2500/US Dimensions Sandwich Valves Series ZDV ZDV01 – Inch equivalents for millimeter dimensions are shown in (**) B Seal Kit Seal Order Code 1 098-91182-0 5 098-91183-0 Complete Cartridge Seal Order Code 1 098-91116-0 5 098-91117-0 ZDV02 – Inch equivalents for millimeter dimensions are shown in (**) Seal Kit Seal Order Code 1 098-91076-0 5 098-91077-0 Complete Cartridge Seal Order Code 1 098-91116-0 5 098-91117-0 Denison Sandwich.indd, dd B48 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series ZNS Catalog HY14-2500/US Technical Information General Description Series ZNS counterbalance valve controls the actuator movement at overrunning loads. The return flow from the actuator is piloted and controlled by the inlet flow to the actuator, ensuring a cavitation-free lowering of the load. B The counterbalance valve operates as a pressure relief valve. The setting pressure is lowered by the pressure in the inlet line. To ensure safe load holding the setting pressure should be approximately 30% higher than the max. load pressure. ZNS-AB01 ZNS-B01 Features • • • • Controlled movement loads. Load holding via leak-free poppet valve. Secondary relief protection for the actuator. Sizes: ZNS-B01 ZNS*01 – NFPA D03 / NG6 / CETOP 3 ZNS*02 – NFPA D05 / NG10 / CETOP 5 Ordering Information ZNS Counterbalance Valve Code A B AB Port Option Description in A in B in A and B Size Pressure Range Code Description 01 NFPA D03 / NG6 02 NFPA D05 / NG10 S0 D Hexagon Screw with Lock Nut Design Series Code Description 2 70 to 175 Bar (1015 to 2538 PSI) 140 to 350 Bar (2030 to 5075 PSI) 5 1) 1) Seal Code 1 5 Description Nitrile Fluorocarbon ZNS02 to 315 Bar (4568 PSI) Weight: ZNS*01 ZNS*02 ZNS01 1 cartridge 1.3 kg (2.9 lbs.) 1.6 kg (3.5 lbs.) 2 cartridges 3.0 kg (6.6 lbs.) 3.9 kg (8.6 lbs.) ZNS02 Denison Sandwich.indd, dd B49 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series ZNS Catalog HY14-2500/US Specifications Specifications General Size Mounting Interface B NG6 NG10 DIN 24340 A6 ISO 4401 NFPA D03 DIN 24340 A10 ISO 4401 NFPA D05 Mounting Position Unrestricted Ambient Temperature Range -20°C to +50°C (-4°F to +122°F) Hydraulic Maximum Operating Pressure 350 Bar (5075 PSI) Pressure Range 175 Bar (2538 PSI), 350 Bar (5075 PSI) Pilot Ratio 4.5 : 1 Leakage On request 315 Bar (4568 PSI) Nominal Flow 60 LPM (15.9 GPM) 120 LPM (31.7 GPM) Opening Pressure 0.3 LPM (0.1 GPM) 0.3 LPM (0.1 GPM) Fluid Hydraulic oil as per DIN 51524 ... 51525 Fluid Temperature -20°C to +80°C (-4°F to +176°F) Viscosity 10 to 650 cSt / mm2/s (46 to 3013 SSU) 30 cSt / mm2/s (139 SSU) Permitted Recommended Filtration ISO Class 4406 (1999) 18/16/13 (acc. NAS 1638: 7) Denison Sandwich.indd, dd B50 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series ZNS Catalog HY14-2500/US Performance Curves ZNS01 B ZNS02 All characteristic curves measured with HLP46 at 50°C (122°F). Denison Sandwich.indd, dd B51 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Catalog HY14-2500/US Dimensions Sandwich Valves Series ZNS ZNS01 – Inch equivalents for millimeter dimensions are shown in (**) B Seal Kit Seal Order Code 1 098-91153-0 5 098-91154-0 Complete Cartridge Seal Order Code 1 517-01017-2 5 517-00448-8 ZNS02 – Inch equivalents for millimeter dimensions are shown in (**) Seal Kit Seal Order Code 1 098-91155-0 5 098-91183-0 Complete Cartridge Seal Order Code 1 517-00449-8 5 517-00450-8 Denison Sandwich.indd, dd B52 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series ZRD Catalog HY14-2500/US Technical Information General Description Series ZRD throttle check valves are designed for maximum flow rates. The throttle check function can be located in port A or B as well as in A + B. Meter-in or meter-out functionality can be selected by model code. B A low flow / high resolution version in NFPA 03 / NG6 for sensitive shifting time adjustment of pilot operated directional control valves is available on request. ZRD-ABZ01 ZRD-AA02 Features • • • High flow capacity. Various functional arrangements. Sizes: – ZRD01 – NFPA D03 / NG6 / CETOP 3 – ZRD02 – NFPA D05 / NG10 / CETOP 5 ZRD-AA02 Ordering Information ZRD Throttle Valve with Check Meter Option Code AA AZ BA BZ ABA ABZ Description Meter-out Control in A Meter-in Control in A Meter-out Control in B Meter-in Control in B Meter-out Control in A and B Meter-in Control in A and B Size Code 01 02 S0 D Hexagon Screw with Lock Nut Design Series Seal Code 1 5 Description NFPA D03 / NG6 NFPA D05 / NG10 Weight: ZRD*01 ZRD*02 1 Cartridge 1.2 kg (2.6 lbs) 2.8 kg (6.2 lbs.) Description Nitrile Fluorocarbon 2 Cartridges 1.3 kg (2.9 lbs) 2.9 kg (6.4 lbs.) ZRD01 ZRD02 (continued on next page) Denison Sandwich.indd, dd B53 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series ZRD Catalog HY14-2500/US Ordering Information Ordering Information ZRD02 B Specifications General Size Mounting NG6 NG10 DIN 24340 A6 ISO 4401 NFPA D03 CETOP RP 121 DIN 24340 A10 ISO 4401 NFPA D05 CETOP RP 121 5 Mounting Position Unrestricted Ambient Temprature -20°C to +50°C (-4°F to +122°F) Hydraulic Max. Operating Pressure Nominal Flow Leakage Cracking Pressure 350 Bar (5075 PSI) 80 LPM (21.2 GPM) 160 LPM (42.3 GPM) — — — — Fluid Hydraulic oil as per DIN 51524 ... 51525 Fluid Temperature -20°C to +80°C (-4°F to +176°F) Viscosity Permitted Recommended Filtration 10 to 650 cSt / mm2/s (46 to 3013 SSU) 30 cSt / mm2/s (139 SSU) ISO 4406 (1999) 18/16/13 (acc. NAS 1638: 7) Denison Sandwich.indd, dd B54 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Catalog HY14-2500/US Performance Curves Sandwich Valves Series ZRD p/Q Performance Curves ZRD01 B ZRD02 * Throttle closed Fluid Viscosity 30 cSt @ 50°C (122°F) Denison Sandwich.indd, dd B55 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series ZRD Catalog HY14-2500/US Dimensions ZRD01 Inch equivalents for millimeter dimensions are shown in (**) Seal Kit Seal Order Code 1 098-91096-0 5 098-91097-0 Complete Cartridge Order Code 098-91119-0 O-ring Plate Order Code S26-27553-0 B ZRD02 Inch equivalents for millimeter dimensions are shown in (**) Seal Kit Seal Order Code 1 098-91098-0 5 098-91099-0 Complete Cartridge Order Code 098-91120-0 O-ring Plate Order Code S16-85742-0 Denison Sandwich.indd, dd B56 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series ZRE Catalog HY14-2500/US Technical Information General Description. Series ZRE pilot operated check valves are designed for maximum flow rates and long life time. The valves are typically used in combination with spool type directional control valves to ensure leak free positioning of the actuator. B The inlet flow is free while the outlet flow is blocked. Pressure in the inlet line opens the check valve and allows free outlet flow. ZRE-B01 ZRE-A02 Features • • • High life time. Check function in A, B or A + B. Sizes: – ZRE01 – NFPA D03 / NG6 / CETOP 3 – ZRE02 – NFPA D05 / NG10 / CETOP 5 ZRE-A02 Ordering Information ZRE Pilot Operated Check Valve Port Option Code A B AB Description Blocked in A Blocked in B Blocked in A and B Size Code 01 02 Design Series Description NFPA D03 / NG6 NFPA D05 / NG10 Code D E Description Size 01 Size 02 Seal Code 1 5 Weight: ZRE*01 ZRE*02 ZRE01 Description Nitrile Fluorocarbon 1.2 kg (2.6 lbs) 3.1 kg (6.8 lbs.) ZRE02 Denison Sandwich.indd, dd B57 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series ZRE Catalog HY14-2500/US Technical Information Specifications General Size B Mounting Interface NG6 NG10 DIN 24340 A6 ISO 4401 NFPA D03 CETOP RP 121 DIN 24340 A10 ISO 4401 NFPA D05 CETOP RP 121 5 Mounting Position Unrestricted Ambient Temprature -20°C to +50°C (-4°F to +122°F) Hydraulic Max. Operating Pressure 350 Bar (5075 PSI) Nominal Flow Opening Ratio (Pilot Cone/Main Cone) Cracking Pressure 60 LPM (15.9 GPM) 120 LPM (31.7 GPM) 1:6 1:6 1.2 Bar (17.4 PSI) 2.0 Bar (29.0 PSI) Fluid Hydraulic oil in accordance with DIN 51524 ... 51525 Fluid Temperature -20°C to +80°C (-4°F to +176°F) Viscosity Permitted Recommended 10 to 650 cSt / mm2/s (46 to 3013 SSU) 30 cSt / mm2/s (139 SSU) Filtration ISO 4406 (1999) 18/16/13 (acc. NAS 1638: 7) Performance Curves p/Q ZRE01 ZRE02 Fluid Viscosity 30 cSt at 50°C (122°F). Denison Sandwich.indd, dd B58 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series ZRE Catalog HY14-2500/US Dimensions ZRE01 Inch equivalents for millimeter dimensions are shown in (**) Seal 1 5 Seal Kit Order Code 098-91088-0 098-91089-0 Seal 1 5 Seal Kit Order Code 098-91090-0 098-91091-0 ZRE02 Inch equivalents for millimeter dimensions are shown in (**) Denison Sandwich.indd, dd B59 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA B Sandwich Valves Series ZRV Catalog HY14-2500/US Technical Information General Description Series ZRV direct operated check valves have a cartridge type insert to provide zero leakage and high life time. B The check function can be located in the P-port or in the T-port. ZRV-P02 ZRV-P02 Features • • • • Leakage-free seat. High life time. Cracking pressure 0.5 Bar (7.25 PSI). Sizes: – ZRV01 – NFPA D03 / NG6 / CETOP 3 – ZRV02 – NFPA D05 / NG10 / CETOP 5 ZRV-P02 Ordering Information ZRV Direct Operated Check Valve Port Option Code P T Weight: ZRV*01 ZRV*02 Description Blocked in P Blocked in T Size Code 01 02 Description NFPA D03 / NG6 NFPA D05 / NG10 0.7 kg (1.5 lbs) 2.0 kg (4.4 lbs.) ZRV01 ZRV02 Denison Sandwich.indd, dd B60 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series ZRV Catalog HY14-2500/US Technical Information Specifications General Size Mounting Interface NG6 NG10 DIN 24340 A6 ISO 4401 NFPA D03 CETOP RP 121 DIN 24340 A10 ISO 4401 NFPA D05 CETOP RP 121 5 Mounting Position Unrestricted Ambient Temprature -20°C to +50°C (-4°F to +122°F) Hydraulic Max. Operating Pressure 350 Bar (5075 PSI) Nominal Flow Cracking Pressure 40 LPM (10.6 GPM) 100 LPM (26.5 GPM) 0.5 Bar (7.25 PSI) 0.5 Bar (7.25 PSI) Fluid Hydraulic oil as per DIN 51524 ... 51525 Fluid Temperature -20°C to +80°C (-4°F to +176°F) Viscosity Permitted Recommended 10 to 650 cSt / mm2/s (46 to 3013 SSU) 30 cSt / mm2/s (139 SSU) Filtration ISO 4406 (1999) 18/16/13 (acc. NAS 1638: 7) p/Q Performance Curves ZRV P/T01 ZRV P/T02 Denison Sandwich.indd, dd B61 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA B Catalog HY14-2500/US Dimensions Sandwich Valves Series ZRV ZRV01 – Inch equivalents for millimeter dimensions are shown in (**) B ZRV02 – Inch equivalents for millimeter dimensions are shown in (**) Denison Sandwich.indd, dd B62 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series CM, CPOM, FM, PRDM, PRM, RM, Z** Catalog HY14-2500/US Installation Information CAUTION: Sandwich Installation System Cleanliness Any hydraulic system that includes Parker valves should be carefully protected against dirt and fluid contamination. Life of the valves, as well as of all other components, will be greatly lengthened. Operation will be smoother and more precise. Maintenance and repairs will be reduced. Lost production because of low pressure and flow will be minimized. Fluid contamination should be maintained to less than 500 particles larger than 10 micrometers per milliliter of fluid (SAE class 4 or better/ISO Code 16/13). Prior to installation of Sandwich valves, please review flow paths. Due to the reversibility of the DO3 size, incorrect installation will alter the hydraulic circuit. Care must be taken during installation to insure that the Sandwich is installed in compliance with the hydraulic schematic. Please consult with your Parker representative with any questions that may arise. Hydraulic Fluids Parker recommends using top-quality hydraulic fluids having a viscosity range of 32 to 54 cSt (150 to 250 SSU) at 38°C (100°F). The absolute viscosity range should be 16 to 220 cSt (80 to 1000 SSU). Fluids should have highest anti-wear characteristics and be treated to avoid rust and oxidation. Pressure Ratings Unless otherwise specified, all Parker Sandwich valves have continuous duty pressure rating as shown in this catalog. Seals Special Requirements When used with water-glycol, water/oil emulsions, and high-grade petroleum base hydraulic fluids, Parker standard nitrile seals are suitable. Consult your Parker representative for factory recommendations on such situations as: • • • When using phosphate ester fluids or their blends, specify Parker optional seals made of fluorocarbon. Synthetic fire-resistant fluids require special seal materials which your Parker representative can recommend. Installations that will operate at pressures higher than published catalog ratings. Use of hydraulic fluids which do not meet our recommended specifications. Torque Specifications Operations where fluid temperature will exceed 121°C (250°F). The recommended torque valves are for the bolts which mount the valve to the manifold or subplate are as follows: Recommended Mounting Surface Surface must be flat within .0004 inch T.I.R. and smooth with 32 micro-inch. Size D03 D05 D07 D08 Torque Valve 5.7 N.m. (50 in.-lbs.) 16.3 N.m. (12 ft.-lbs.) 63.0 N.m. (46.5 ft.-lbs.) 108.5 N.m. (80 ft.-lbs.) Denison Sandwich.indd, dd B63 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA B Sandwich Valves Series CM, CPOM, FM, PRDM, PRM, RM, Z** Catalog HY14-2500/US Installation Information Mounting Pattern – NFPA D03, CETOP 3 & NG6 Inch equivalents for millimeter dimensions are shown in (**) 51.00 (2.000) min. M5-0.8 (10-24) UNC-2B thread x 10.40 (.410) min. thread depth 4-holes 40.50 (1.594) 0.28 (0.011) 33.00 (1.300) B 21.50 (0.850) 0.75 (0.030) B O 7.5 (.295) max. P.A.B. & T ports A 43.00 (1.70) min. 31.75 (1.250) A B 30.20 (1.190) 5.10 (0.200) T 15.50 (0.610) 31.00 (1.220) S 0.56 (0.022) L A B A 25.90 (1.020) O 3.86/4.27 (.152/.168) x 4.00 (.160) min. depth B 0.28 (0.011) P 12.70 (0.500) A B S 4.80 (0.190) R. max. typ. 4 places Mounting Pattern – NFPA D05, CETOP 5 & NG10 Inch equivalents for millimeter dimensions are shown in (**) 54.0 (2.13) 50.8 (2.00) 27.0 (1.06) 21.4 (0.84) 6.4 (0.25) 91.2 (3.62) -B- 37.3 (1.47) 16.7 (0.66) 3.2 (0.13) O 11.2 (0.441) max. P.A.B. & T ports -A- 75.0 (2.95) 46.0 (1.81) 0.56 (0.022) P 32.5 (1.28) A T B T L A B ¼ – 20 UNC – 2B (M6 x 1) th'd x 9.7 (0.38) min. th'd depth 4 places 0.28 (0.011) S A B Denison Sandwich.indd, dd B64 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA Sandwich Valves Series CM, CPOM, FM, PRDM, PRM, RM, Z** Catalog HY14-2500/US Installation Information Mounting Pattern – NFPA D07, CETOP 7 & NG16 Inch equivalents for millimeter dimensions are shown in (**) B Mounting Pattern – NFPA D08, CETOP 8 & NG25 Inch equivalents for millimeter dimensions are shown in (**) 152.4 (6.00) 130.2 (5.13) 100.8 (3.97) 77.0 (3.03) 17.5 (0.69) 4.8 (0.19) 29.4 (1.16) -B112.7 (4.44) 94.5 (3.72) ½ – 13 UNC – 2B x 22.22 min th'd dp. (M12) (0.875) 6 holes 53.2 (2.09) 0.28 (0.011) 17.5 (0.69) -A- 130.0 (5.12) 92.1 (3.63) 74.6 (2.94) S A B O 11.2 (0.441) max. 3 holes 0.56 (0.022) 73.0 (2.88) L A B O 23.42 (0.922) max. 4 holes 0.56 (0.022) L A B O 0.288 / 272 x 0.31 min dp. (7.32 / 6.91) (8) 2 holes 0.28 (0.011) L A B Denison Sandwich.indd, dd B65 www.comoso.com Parker Hannifin Corporation Hydraulic Valve Division Elyria, Ohio, USA
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Appligent : StampPDF Batch 5.1 Jan 18 2010, 9.0.1 Create Date : 2011:11:04 10:11:18-04:00 Creator : Adobe InDesign CS5 (7.0.4) Modify Date : 2013:04:02 09:19:26-07:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.352151, 2008/07/27-22:00:37 Instance ID : uuid:a5d8dda1-b3b1-43a6-9cb5-ac6e840c84aa Document ID : xmp.did:01FD6C4BD474E011AA21EE7D82CC6200 Original Document ID : adobe:docid:indd:01d53b9a-90d3-11dd-9863-bfae8ef5ee0f Rendition Class : proof:pdf Derived From Instance ID : xmp.iid:FEFC6C4BD474E011AA21EE7D82CC6200 Derived From Document ID : adobe:docid:indd:01d53b9a-90d3-11dd-9863-bfae8ef5ee0f Derived From Original Document ID: adobe:docid:indd:01d53b9a-90d3-11dd-9863-bfae8ef5ee0f Derived From Rendition Class : default History Action : saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved, saved History Instance ID : xmp.iid:25FD7A7DD274E011AA21EE7D82CC6200, xmp.iid:26FD7A7DD274E011AA21EE7D82CC6200, xmp.iid:29FD7A7DD274E011AA21EE7D82CC6200, xmp.iid:2AFD7A7DD274E011AA21EE7D82CC6200, xmp.iid:FCFC6C4BD474E011AA21EE7D82CC6200, xmp.iid:FDFC6C4BD474E011AA21EE7D82CC6200, xmp.iid:FEFC6C4BD474E011AA21EE7D82CC6200, xmp.iid:01FD6C4BD474E011AA21EE7D82CC6200, xmp.iid:04FD6C4BD474E011AA21EE7D82CC6200, xmp.iid:05FD6C4BD474E011AA21EE7D82CC6200, xmp.iid:06FD6C4BD474E011AA21EE7D82CC6200, xmp.iid:344E0015D574E011AA21EE7D82CC6200, xmp.iid:83EE48DF7990E01194FAB2C75342729F, xmp.iid:84EE48DF7990E01194FAB2C75342729F, xmp.iid:613B1ECA9290E01190C89D7AA2C020F7, xmp.iid:623B1ECA9290E01190C89D7AA2C020F7, xmp.iid:653B1ECA9290E01190C89D7AA2C020F7, xmp.iid:9DB85CB95C9EE0119F41B35DB7C7D445, xmp.iid:9EB85CB95C9EE0119F41B35DB7C7D445, xmp.iid:8335CDADB5B1E011AC8EEDF81B8A6A19, xmp.iid:2D31E6DFCDB3E0119E44A83236A9C517, xmp.iid:2E31E6DFCDB3E0119E44A83236A9C517, xmp.iid:1540D7C3D3B3E011B1879638A1831EB0, xmp.iid:D10A48DDDFC1E01194A5ED46C71D10D8, xmp.iid:D20A48DDDFC1E01194A5ED46C71D10D8, xmp.iid:3FC238C555C7E0119140D30EABE4AEB1, xmp.iid:33915A856EC7E0119140D30EABE4AEB1, xmp.iid:34915A856EC7E0119140D30EABE4AEB1, xmp.iid:37915A856EC7E0119140D30EABE4AEB1, xmp.iid:9A8AABA4DFCCE011AD0BB54506AE0A84, xmp.iid:9B8AABA4DFCCE011AD0BB54506AE0A84, xmp.iid:D6144812D3CEE011AB34806FDA268A1A, xmp.iid:D7144812D3CEE011AB34806FDA268A1A, xmp.iid:DA144812D3CEE011AB34806FDA268A1A, xmp.iid:F831FF17DBCEE011AB34806FDA268A1A, xmp.iid:ED3CA3F0DECEE011A9ADD7D906545955, xmp.iid:EE3CA3F0DECEE011A9ADD7D906545955, xmp.iid:F13CA3F0DECEE011A9ADD7D906545955, xmp.iid:F23CA3F0DECEE011A9ADD7D906545955, xmp.iid:29004BBD2ACFE0118A04F29171EC8BDB, xmp.iid:2A004BBD2ACFE0118A04F29171EC8BDB, xmp.iid:72739F2032CFE0118A04F29171EC8BDB, xmp.iid:73739F2032CFE0118A04F29171EC8BDB, xmp.iid:61596EDCE8D7E011A52BD03F7E2F8DA5, xmp.iid:62596EDCE8D7E011A52BD03F7E2F8DA5, xmp.iid:D14068BAF5D7E011995BD6E7469A5AA6, xmp.iid:C16C70B684D8E0119D30D4DACA066286, xmp.iid:C26C70B684D8E0119D30D4DACA066286, xmp.iid:C56C70B684D8E0119D30D4DACA066286, xmp.iid:7C11580F49ECE0119A7C859A1F458A3A, xmp.iid:7D11580F49ECE0119A7C859A1F458A3A, xmp.iid:35E5423A4AECE0119A7C859A1F458A3A, xmp.iid:DA927F01F9F2E011AC42DBEF853B1F14, xmp.iid:DB927F01F9F2E011AC42DBEF853B1F14, xmp.iid:4F45E421FAF2E011AC42DBEF853B1F14, xmp.iid:5045E421FAF2E011AC42DBEF853B1F14, xmp.iid:035D108996F3E011A65D880B03B715BA, xmp.iid:045D108996F3E011A65D880B03B715BA, xmp.iid:36028C779CF3E011A65D880B03B715BA, xmp.iid:6A3602D5A3F5E01181C687E1952152C1, xmp.iid:6B3602D5A3F5E01181C687E1952152C1, xmp.iid:13460A40A6F5E01181C687E1952152C1, xmp.iid:14460A40A6F5E01181C687E1952152C1, xmp.iid:45435AD588F6E0119113D501C928E110, xmp.iid:46435AD588F6E0119113D501C928E110, xmp.iid:0ADF70EE8CF6E0119113D501C928E110, xmp.iid:0BDF70EE8CF6E0119113D501C928E110, xmp.iid:B0AAE70CF4FCE01197ED89400435B497, xmp.iid:345ECEB6F4FCE01197ED89400435B497, xmp.iid:CE1E58F507FDE011AC36810FB482CFF1, xmp.iid:CF1E58F507FDE011AC36810FB482CFF1, xmp.iid:1B908EBF62FEE011952A914B6697E526, xmp.iid:1C908EBF62FEE011952A914B6697E526 History When : 2011:05:02 11:40:21-04:00, 2011:05:02 11:40:21-04:00, 2011:05:02 11:49:27-04:00, 2011:05:02 11:49:27-04:00, 2011:05:02 11:53:16-04:00, 2011:05:02 11:53:16-04:00, 2011:05:02 11:53:39-04:00, 2011:05:02 11:53:39-04:00, 2011:05:02 11:55:30-04:00, 2011:05:02 11:55:30-04:00, 2011:05:02 11:58:55-04:00, 2011:05:02 11:58:55-04:00, 2011:06:06 17:15:01-04:00, 2011:06:06 17:15:01-04:00, 2011:06:06 19:14:55-04:00, 2011:06:06 19:14:55-04:00, 2011:06:06 19:16:11-04:00, 2011:06:24 08:23:10-04:00, 2011:06:24 08:23:10-04:00, 2011:07:18 23:17:57-04:00, 2011:07:21 15:16:02-04:00, 2011:07:21 15:16:02-04:00, 2011:07:21 16:02:06-04:00, 2011:08:08 13:00:05-04:00, 2011:08:08 13:00:05-04:00, 2011:08:15 12:00:10-04:00, 2011:08:15 21:16:58-04:00, 2011:08:15 21:16:58-04:00, 2011:08:15 21:18:17-04:00, 2011:08:22 13:10-04:00, 2011:08:22 13:10-04:00, 2011:08:25 00:32:28-04:00, 2011:08:25 00:32:28-04:00, 2011:08:25 01:28:41-04:00, 2011:08:25 01:28:41-04:00, 2011:08:25 01:56:13-04:00, 2011:08:25 01:56:13-04:00, 2011:08:25 01:56:41-04:00, 2011:08:25 01:56:41-04:00, 2011:08:25 11:47:04-04:00, 2011:08:25 11:47:04-04:00, 2011:08:25 11:51:42-04:00, 2011:08:25 11:51:42-04:00, 2011:09:05 13:59:55-04:00, 2011:09:05 13:59:55-04:00, 2011:09:05 15:32:01-04:00, 2011:09:06 08:35:32-04:00, 2011:09:06 08:35:32-04:00, 2011:09:06 09:12:57-04:00, 2011:10:01 12:25:58-04:00, 2011:10:01 12:25:58-04:00, 2011:10:01 12:27:17-04:00, 2011:10:10 00:41:15-04:00, 2011:10:10 00:41:15-04:00, 2011:10:10 00:41:34-04:00, 2011:10:10 00:41:34-04:00, 2011:10:10 19:25:06-04:00, 2011:10:10 19:25:06-04:00, 2011:10:10 20:03:46-04:00, 2011:10:13 10:04:58-04:00, 2011:10:13 10:04:58-04:00, 2011:10:13 10:20:12-04:00, 2011:10:13 10:20:12-04:00, 2011:10:14 13:20:37-04:00, 2011:10:14 13:20:37-04:00, 2011:10:14 13:53:58-04:00, 2011:10:14 13:53:58-04:00, 2011:10:22 17:27:59-04:00, 2011:10:22 17:27:59-04:00, 2011:10:22 19:46:35-04:00, 2011:10:22 19:46:35-04:00, 2011:10:24 13:08:09-04:00, 2011:10:24 13:08:09-04:00 History Software Agent : Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0, Adobe InDesign 7.0 History Changed : /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata, /;/metadata, /metadata Metadata Date : 2013:04:02 09:19:26-07:00 Creator Tool : Adobe InDesign CS5 (7.0.4) Page Image Page Number : 1, 2 Page Image Format : JPEG, JPEG Page Image Width : 256, 256 Page Image Height : 256, 256 Page Image : (Binary data 8559 bytes, use -b option to extract), (Binary data 11042 bytes, use -b option to extract) Doc Change Count : 1645 Format : application/pdf Producer : Appligent StampPDF Batch, version 5.1 Trapped : False Page Layout : TwoColumnLeft Page Mode : UseOutlines Page Count : 64EXIF Metadata provided by EXIF.tools