JSS4 TS Posh Dominique Link Toilet Suite 9502975 Tech Warranty

User Manual: JSS4-TS

Open the PDF directly: View PDF PDF.
Page Count: 3

DownloadJSS4-TS Posh-Dominique-Link-Toilet-Suite-9502975-tech-warranty
Open PDF In BrowserView PDF
410
page 1 of 3

670min - 780max

POSH
LINK TOILET SUITE
825-840

360

155

375

367

Posh Solus170
Link S Trap 445
Toilet Suite
SOLUS

DOMINIQUE

280

280

480

870

870
375

375

405

840

825-840

400

670 min - 780 max

360

420

170min - 280max

405

170

170

260
360

170 min - 280 max

170min - 280max

410

670min - 780max
825-840

Suite S Trap (4*)
SPECIFICATIONS
Domestic, Hotel, and Commercial

Material

Pan Vitreous China

Posh Solus170
Link S Trap 445
Toilet Suite
280

Seat Plastic Link and Seat
Pan

18kg

Solus Cistern

12kg

840

Dominique Cistern 14kg
Water Inlet

Left or right

Inlet Valve

Recommended maximum working pressure 500kPa

Bowl Configuration

S Trap only

Rim Configuration

Box Rim

Seat

Soft Close Seat and link piece (supplied)

Cistern fixing

Cistern fixed to wall using corrosion resistant
brackets (supplied).

Pan fixing

Pan screwed to floor using fixing bolts (not supplied)
and bedded with sealant.
Options - Performa S/S Pan Screws

825-840

Weight

170min -

170

400

White

360

375

Colour

367

405

Recommended use

360

155

375
Dimensions
are nominal
measurements
only.
9505484
Posh
Solus Link

480

260

170min - 280max
SOLUS

DOMINIQUE

To see the complete POSH range go to
www.reece.com.au/bathrooms

Cleaning Recommendations
We recommend the use of soapy water or approved cleaners.
This product should not be cleaned with abrasive materials.

9505484 Posh Solus Link
Suite S Trap (4*)

Damage caused by any improper treatment is not covered by the product warranty. Refer to Warranty Conditions.

The more
stars the more
water efficient

A joint government and industry
program

TM

Licence No. 0025

4.5

litres per full flush

3

litres per half flush

3.5 litres per average flush
when tested in accordance with standard AS/NZS6400

For more information and to compare
products refer to:

AS/NZS 1172
WMKA 21192

Disclaimer: Products in this specification manual must by regulation be installed by licensed and registered
trade people. The manufacturer/distributor reserves the right to vary specifications or delete models from
their range without prior notification. Dimensions are nominal measurements only. Dimensions and set-outs
listed are correct at time of publication however the manufacturer/distributor takes no responsibility for
printing errors.
Tech Page Version 1

page 2 of 3

POSH
LINK TOILET SUITE
Installation INSTRUCTIONS
1.	Check that that pan is installed within dimensional tolerances. Place suite in position. Mark out the fixing holes for
the cistern (cistern should be fixed to a noggin or solid wall).
2. If required, modify flush pipe to fit pan and cistern.
3.	To install the link piece, flush pipe and seat, refer to the instructions opposite.

1

2
1

1
1

2
1
2

2

2

Fit plastic bolts and slide nuts onto seat

3

Position seat onto pan and align correctly

4

2
3

Draw line across back edge of the seat hinge.
Platform and remove seat.

5

Slide plastic link piece over flush pipe nut until it
locks into position
Plumbers, please ensure a copy of the installation
instructions is left with the end user for future reference

1

Once flush pipe has been cut to correct length,
lubricate and fit keeseal to pipe. Mount cistern
onto wall at recommended height.
Once this is done, fit and tighten plastic
flush pipe nut.

6

Mark off line on link piece to align with
previously drawn line (Diagram 3)

page 3 of 3

POSH
LINK TOILET SUITE

7

L

8

remove link piece and...

L- 10mm
Cut off as per distance (L) less 10mm.
Reinstall link piece

9

Slide/position seat into link piece

Plumbers, please ensure a copy of the installation
instructions is left with the end user for future reference

Reposition seat back onto pan and slightly
tighten seat fixing bolts

10

Fully tighten bolts to lock seat and link inot
position. Ensure all connections are secure
and water tight.
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Create Date                     : 2016:07:04 08:58:27+10:00
Creator                         : Adobe InDesign CS6 (Windows)
Modify Date                     : 2016:07:04 09:52:20+10:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Instance ID                     : uuid:dc024c61-3b87-49f5-932f-3d1680ad6ccf
Original Document ID            : adobe:docid:indd:f0477979-e1c9-11dd-82d2-d457de0cd766
Document ID                     : xmp.id:AE54CAA07141E6118E4AB2C5A76AA43D
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:AD54CAA07141E6118E4AB2C5A76AA43D
Derived From Document ID        : xmp.did:95502FDC6B7EE411AE16A6F22BDC1C4F
Derived From Original Document ID: adobe:docid:indd:f0477979-e1c9-11dd-82d2-d457de0cd766
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2016:07:04 08:58:27+10:00
Metadata Date                   : 2016:07:04 09:52:20+10:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Layout                     : TwoPageRight
Page Count                      : 3
EXIF Metadata provided by EXIF.tools

Navigation menu