ProPak6_User_Manual Pro Pak6 Manual
User Manual:
Open the PDF directly: View PDF
Page Count: 130 [warning: Documents this large are best viewed by clicking the View PDF Link!]
- Notices
- Customer Support
- Introduction
- Installation
- 2.1 Additional Equipment Required
- 2.2 ProPak6 Hardware
- 2.3 Communication with the ProPak6
- 2.4 Standard Configuration Installation
- 2.5 Dual Antenna Configuration and Installation
- 2.6 Cellular Antenna Installation
- 2.7 ProPak6 Alternative Power Source
- 2.8 Installing NovAtel Connect PC Utilities
- 2.9 ProPak6 Security
- 2.10 Next Steps
- Operation
- 3.1 Communications with the Receiver
- 3.1.1 Communicating Using a Remote Terminal
- 3.1.2 Communicating Using a Computer
- 3.1.3 Status Indicators
- 3.1.4 COM Ports LEDs
- 3.1.5 Bluetooth LED
- 3.1.6 Wi-Fi LED
- 3.1.7 INS and ALIGN LEDs
- 3.1.8 Satellite Tracking and Positioning LEDs
- 3.1.9 Cell Port and LED
- 3.1.10 Universal Serial Bus (USB) Port and LEDs
- 3.1.11 Ethernet Port
- 3.1.12 ICOM Ports
- 3.1.13 Serial Ports
- 3.1.14 I/O Port
- 3.1.15 Expansion Port
- 3.1.16 Antenna LNA Port
- 3.1.17 External Oscillator Port (model dependent)
- 3.2 Getting Started
- 3.3 Establishing a Receiver COM Connection
- 3.4 Transmitting and Receiving Corrections
- 3.5 External ALIGN Master or Rover Configuration Only
- 3.6 STEADYLINE®
- 3.7 Logging and Retrieving Data Overview
- 3.8 ProPak6 Web User Interface (UI)
- 3.1 Communications with the Receiver
- Ethernet Configuration
- Radio Configuration and Activation
- NTRIP Configuration
- NovAtel Firmware and Software
- OEM6 Firmware and Software
- NovAtel Connect PC Utilities Software Bundle
- Firmware and Software included
- 7.1 Firmware Updates and Model Upgrades
- 7.2 Authorization Code
- 7.3 Updating or Upgrading Using the WinLoad Utility
- 7.4 Updating Using SoftLoad Commands
- 7.5 Upgrading Using the AUTH Command
- Built-In Status Tests
- Technical Specifications
- Replacement Parts
- Frequently Asked Questions