ProcessorSDKRadar_UserGuide Processor SDKRadar User Guide

• TABLE OF CONTENTS
• 1 Introduction
  • 1.1 References
  • 1.2 Directory Structure
• 2 System Requirements
  • 2.1 Windows Installation
    • 2.1.1 PC Requirements
    • 2.1.2 Software Requirements
    • 2.1.3 A15 Compiler, Linker
    • 2.1.4 Code Composer Studio
  • 2.2 Linux Installation
    • 2.2.1 PC Requirements
    • 2.2.2 Software Requirements
      • 2.2.2.1 A15 Compiler, Linker
    • 2.2.3 Other software packages for build depending upon OS baseline
  • 2.3 Hardware Requirements
    • 2.3.1 AWR12 Sensor Setup with TDA3xx EVM
      • 2.3.1.1 Required H/W modification / Configurations
        • 2.3.1.1.1 TDA3XX EVM Modifications for Radar Usecase
        • 2.3.1.1.2 AWR1XX EVM Jumper settings for TDA3xx setup
      • 2.3.1.2 Power Supply Information
      • 2.3.1.3 Erasing the AWR12x Booster Pack onboard serial flash
    • 2.3.2 TDA3xx ALPS Board
    • 2.3.3 AWR1243 Satellite Radar Module + RVP-TDA3x via FPD-Link III
  • 2.4 Software Installation
    • 2.4.1 Uninstall Procedure
• 3 Build and Run
  • 3.1 Overview of application in release
  • 3.2 Building the application
  • 3.3 Console Output
  • 3.4 Boot Modes
  • 3.5 Load using QSPI
  • 3.6 Load using QSPI and SD boot
  • 3.7 Load using SD Card
  • 3.8 Load using CCS
  • 3.9 Run the demo
    • 3.9.1 Usecase Specific Steps to run
      • 3.9.1.1 Radar (Single AWR1243) Capture + Null (TDA3xx Only)
      • 3.9.1.2 Radar (Single AR1243) Capture + Radar Object Detect (EVE1) + Display (TDA3xx Only)
      • 3.9.1.3 Radar (Single AWR1243) Capture + Radar FFT (EVE1) + DSP (FFT Heat Map) + Null (TDA3xx Only)
      • 3.9.1.4 Null Source (SD/Network) Input + Radar FFT (EVE1) + Null (SD/Network)
        • 3.9.1.4.1 SD Card
        • 3.9.1.4.2 Network
      • 3.9.1.5 Satellite Radar (Single AWR1243) Capture + Radar FFT (EVE1) + DSP (FFT Heat Map) + Display (TDA3xx Only)
• 4 Frequently Asked Questions
• 5 Revision History