2 VL 128RS QM M 7.1 Ver.1.2 List Of Items Indicating Upgradation Quantity, Ing Charges

User Manual: VL-128RS

Open the PDF directly: View PDF PDF.
Page Count: 8

ISO9001:2008
Document No: QM-M-7.1-2
Version No: 1.2
Date Effective: 23.08.2013
Document Title: List of items controlled by QA(Mech) Dte. indicating upgradation quantity, testing charges for testing in RDSO
ARO/ QA(Mech)
Director/ QA(Mech)
Printed: 23.08.2013
Prepared By:
Issued By:
Page 1 of 8
RESEARCH DESIGNS & STANDARDS ORGANIZATION
Manaknagar, Lucknow – 226011
QM-M-7.1-2
List of items controlled by QA(Mech) Dte. indicating upgradation quantity,
testing charges for testing in RDSO
1.0 Amendment History:
S. No.
Amendment Date
Version
Reasons for Amendment
1
26.04.2013
1.0
Fresh issue
2.
16.08.2013
1.1
Upgradation quantity for item at SN 51 i.e. Medium Phosphorous Brake
Blocks is changed from 5,000 nos. to 22,500 nos.
3.
23.08.2013
1.2
Upgradation quantity for item at SN 51 i.e. Medium Phosphorous Brake
Blocks is retained as 5,000 nos. as mentioned in Ver 1.0.
ISO9001:2008
Document No: QM-M-7.1-2
Version No: 1.2
Date Effective: 23.08.2013
Document Title: List of items controlled by QA(Mech) Dte. indicating upgradation quantity, testing charges for testing in RDSO
ARO/ QA(Mech)
Director/ QA(Mech)
Printed: 23.08.2013
Prepared By:
Issued By:
Page 2 of 8
2.0 Purpose:
This document contains the consolidated list of items controlled by QA(Mech) Directorate indicating Renewal
month, Upgradation quantity, Testing charges for testing in RDSO lab.
The relevant specifications, drawings & STR pertaining to the items are also mentioned.
The reference directives for vendor registration process at RDSO are listed under para 5.0.
3.0 Scope of Application:
It is applicable for QA (Mech.) Directorate.
4.0 Procedure / Details:
Following table lists the items controlled by QA(Mech) Directorate indicating Renewal month, Upgradation
quantity, Testing charges for testing in RDSO lab.
(Wherever testing charges are indicated, these items are to be tested at RDSO lab during Fresh Registration,
unless specified separately)
SN
Item
Specification
Drg no.
STR
Upgradation Qty &
approval policy
Renewal
Month
**Testing Charges
(Applicable for
testing in RDSO)
(to be revised)
1.
Graduated release
compressed air brake
equipment for freight
stock including
components
02-ABR-2002
QMS-14-2009
1000 wagon sets of any
type of wagon (supply of
individual components
cannot be accounted for
Wagon Set)
JAN
N/A
Distributor Valve
02-ABR-02
Appendix –A1
Proprietary item
QMS-14-2009
Brake Cylinder (Wagon
355 mm)
02-ABR-02
Appendix –B
WD-92051-S-06
Alt.5
QMS-30-2009
Brake Cylinder (Brake
Van 300mm)
02-ABR-02
Appendix –B
WD-92051-S-11
Alt.3
Auxiliary Reservoir
100 lit.
02-ABR-02
Appendix-C
WD-92051-S-01
Alt.3
QMS-31-2009
Auxiliary Reservoir
75 lit.
02-ABR-02
Appendix-C
WD-92051-S-02
Alt.2
Cut off Angle Cock
02-ABR-02
Appendix-D
WD-88123-S-01
QMS-32-2009
Dirt Collector
02-ABR-02
Appendix-E
WD-92051-S-03
Alt.4
Hose coupling
Assembly for Brake
Pipe
02-ABR-02
Appendix-F
SK-73547 Alt.11
QMS-27-2009
Guard Emergency
Brake Valve
02-ABR-02
Appendix-G
SK-73549 Alt.12
QMS-32-2009
Common pipe bracket
with control reservoir
02-ABR-02
Appendix-A1
WD-97951-S-10
QMS-14-2009
Load Sensing Device
02-ABR-02
Appendix-P
WD-01065-S-01or
Alternative design
approved by RDSO
Isolating Cock for
Brake Van
02-ABR-02
Appendix-I
WD-83062-S-04
Alt.02
QMS-32-2009
Pipes for air brake
system
04-ABR-2002
WD-83062-S-6 &
7,Alt.05 , WD-
94056-S/1
QMS-21-2009
2.
Graduated release
compressed air brake
equipment for
coaching Stock
including components
02-ABR-02
QMS-14-2009
500 sets of all types of
coaches
JAN
N/A
Distributor Valve
02-ABR-02
Proprietary Item
QMS-14-2009
Brake cylinder 355mm
02-ABR-02
Appendix-B
SK-97015
QMS-30-2009
ISO9001:2008
Document No: QM-M-7.1-2
Version No: 1.2
Date Effective: 23.08.2013
Document Title: List of items controlled by QA(Mech) Dte. indicating upgradation quantity, testing charges for testing in RDSO
ARO/ QA(Mech)
Director/ QA(Mech)
Printed: 23.08.2013
Prepared By:
Issued By:
Page 3 of 8
Auxiliary Reservoir
200 lit
02-ABR-02
Appendix-C
SK-96081
QMS-31-2009
Cut off angle cock
02-ABR-02
Appendix-D
WD-88123-S-01
QMS-32-2009
Two way Dirt Collector
02-ABR-02
Appendix-E
SK-97005
Hose Coupling
Assembly for B.P.
02-ABR-02
Appendix-F
SK-73547
QMS-27-2009
Hose Coupling
Assembly for F.P.
02-ABR-02
Appendix-F
WD-81027-S-01
Pressure gauge for
brake pipe & feed pipe
02-ABR-02
Appendix-H
SK- 73553 &
WD– 83062- S/05
QMS-33-2009
Check Valve
Assembly
02-ABR-02
Appendix-I
SK-98112,
WD- 83062-S-03
QMS-32-2009
JAN
N/A
Passenger emergency
Alarm Valve
02-ABR-02
Appendix-J
SK-97029
Passenger
Emergency Alarm
Signal Device with
fixed key arrangement
02-ABR-02
Appendix-J
SK-97017
Guard’s Emergency
Brake Valve
02-ABR-02
Appendix-G
SK-73549
Isolating Cock
02-ABR-02
Appendix-I
SK-97002,
SK-89021,
SK-98013
3.
(a)
Auxiliary Reservoirs
for freight & Coaching
stock
QMS -31-2009
3000 nos.
(Combined quantity of all
three types of AR’s)
JAN
N/A
Auxiliary Reservoir
100 Lt
02-ABR-02
Appendix-C
WD-92051-S-01
Auxiliary Reservoir
75 Lt
02-ABR-02
Appendix-C
WD-92051-S-02
Auxiliary Reservoir
200 lit
02-ABR-02
Appendix-C
SK-96081
3.
(b)
Cut off Angle Cock for
freight & coaching
stock
02-ABR-02
Appendix-D
WD-88123-S-01
QMS -32-2009
1000 Nos.
JAN
N/A
3.
(c)
Dirt Collector
QMS -32-2009
2000 nos. combined
quantity of all types.
JAN
N/A
Dirt Collector
02-ABR-02
Appendix-E
WD-92051-S-03
Two way Dirt Collector
02-ABR-02
Appendix-E
SK-97005
3.
(d)
Hose Assembly for
freight & Coaching
stock
02-ABR-02
Appendix-F
SK-73547 & WD-
81027-S-01
QMS-27-2009
BP & FP hoses combined
quantity of 20,000 nos.
JAN
36,425/-
3.
(e)
Guard’s Emergency
Brake Valve
02-ABR-02
Appendix-G
SK-73549
300 nos.
3.
(f)
Isolating Cock
02-ABR-02
Appendix-I
SK-97002,
SK-89021,
SK-98013
3,000 nos. combined.
New vendors will be
approved for all three
drawings at a time. No
approval would be given for
individual components.
3.
(g)
Check Valve
Assembly
02-ABR-02
Appendix-I
SK-98112,
WD- 83062-S-03
QMS-32-2009
2,000 nos. combined
quantity. New vendors will
be approved for all
drawings at a time. No
approval would be given for
individual items.
JAN
N/A
3.
(h)
Passenger emergency
Alarm Valve
02-ABR-02
Appendix-J
SK-97029
300 Nos.
ISO9001:2008
Document No: QM-M-7.1-2
Version No: 1.2
Date Effective: 23.08.2013
Document Title: List of items controlled by QA(Mech) Dte. indicating upgradation quantity, testing charges for testing in RDSO
ARO/ QA(Mech)
Director/ QA(Mech)
Printed: 23.08.2013
Prepared By:
Issued By:
Page 4 of 8
3.
(i)
Passenger
Emergency Alarm
Signal Device with
fixed key arrangement
02-ABR-02
Appendix-J
SK-97017
300 Nos.
3.
(j)
Pipes for air brake
system for freight &
coaching stock
04-ABR-2002
WD-83062-S-6 & 7,
WD-94056-S/1
QMS-21-2009
2000 sets of air brake pipe
system (combined quantity
of pipe system of any type
of freight stock or any type
of coaching stock).
JAN
N/A
3.
(k)
Pressure gauges for
air brake system –
Coaching & freight
stock
02-ABR-02
Appendix ‘O’ &
Appendix H
WD-92047-S-01Alt
03 ,
SK-73553 Alt 03,
WD-83062-S-05,
WD-91101-S-05 Alt
05
QMS -33-2009
600 nos. combined quantity
of all the 3 types of gauges.
Quick coupler arrange-ment
supply need not be counted
for up-gradation.
Once the firm is upgraded
for pressure gauge it
deemed to be upgraded for
quick coupler also.
JAN
N/A
4.
Brake Cylinder
Assembly
QMS-30-2009
2000 nos. of combined
quantity of all the three
types of brake cylinders.
Vendor approval shall be
taken up for the new
vendors for all the 3 types of
brake cylinders at a time.
No individual approval shall
be given for brake cylinders
drawing-wise.
JAN
N/A
Brake Cylinder
(Wagon 355 mm)
02-ABR-02
Appendix –B
WD-92051-S-06
Alt.5
Brake Cylinder (Brake
Van 300mm)
02-ABR-02
Appendix –B
WD-92051-S-11
Alt.3
Brake cylinder 355mm
02-ABR-02
Appendix-B
SK-97015
5.
Bogie Mounted Brake
Cylinder
C-K013
SK-81200, SK-81057,
SK-81202
1,000 nos.
JAN
N/A
6.
Slack Adjuster and
Spares – for coaching
stock
07-ABR-1992
SK-83063 &
SK-85062
QMS-07-2009
400 nos.
JAN
N/A
7.
Slack Adjuster and
Spares - for freight
stock
07-ABR-1992
SK-83063 & SK-
85062
QMS-07-2009
Combined quantity of 600
nos. of different types of
slack adjusters for freight
stock. (Spares shall not be
counted against the
complete assembly.)
JAN
N/A
8.
Empty load device
IR –ELD –10
WD-84074-S-01
Alt-03, 2 Alt-02, 3-
RC Alt-03
QMS-39-2009
1000 Nos. of empty load
device assembly.
JAN
N/A
9.
Spring Steel Rounds
Gr.60Si7 and Gr.
55Si7)
WD-01-HLS-1994 &
IS: 3195
QMS-16-2009
300MT
MAR
N/A
10.
Spring Steel Rounds
(Gr. 52Cr4Mo2V and
Gr.AISI 8650H)
WD-01-HLS-1994
QMS-16-2009
300 MT
MAR
N/A
11.
Suspension Coil spring
to material Gr.60Si7
and Gr. 52Cr4Mo2V
for freight stock
WD-01-HLS-1994
QMS-17-2009
30,000 nos. combined
quantity of both springs for
any type of freight bogie
MAR
N/A
12.
Suspension coil
springs for coaching
stock
WD-01-HLS-1994
QMS-17-2009
8,000 nos.
MAR
N/A
*13.
Suspension Coil
Springs for
Locomotives
MP.0.4900.12
QMS-17-2009
5,000 nos.
MAR
N/A
14.
Rubber Buffer Pads
for freight stock
R-36
W/BD-2267
QMS-06-2009
10,000 pads
MAY
N/A
15.
Side Bearer Pads for
freight stock
03 Misc 86 Rev.3
_
QMS-06-2009
50,000 pads
MAY
23,500/-
ISO9001:2008
Document No: QM-M-7.1-2
Version No: 1.2
Date Effective: 23.08.2013
Document Title: List of items controlled by QA(Mech) Dte. indicating upgradation quantity, testing charges for testing in RDSO
ARO/ QA(Mech)
Director/ QA(Mech)
Printed: 23.08.2013
Prepared By:
Issued By:
Page 5 of 8
16.
High Capacity Buffer
Spring for Side
Buffers of BG
Coaches
CK-210 Rev. 03
SK- K 2048
Included in
spec.
10,000
MAY
28,200/-(without
static characteristic
test), 39,950/-
(with characteristic
test)
17.
Draw Gear Pads for
coaching stock
C-9501 Rev.3
SK-K-3004
Included in
spec.
5,000 packs
MAY
28,200/-(without
static characteristic
test), Rs 39,950/-
(with characteristic
test
18.
RF-8 Rubber Springs
(High capacity draft
gear pad)
55 –BD –90
WD-90076.S.01
QMS-06-2009
5,000 nos.
MAY
27,25/-
19.
Elastomeric Pads
20-Misc-95
Rev 3, Amendment
of May’06
WD-95005-S-01
QMS-06-2009
100,000 nos.
MAY
23,500/-
(for M&C lab) +
16,30,900/-
(for Fatique testing
lab)
20.
Side Bearer
(secondary rubber
spring for diesel
locomotives
VL-03, VL-02
SKVL-127,
SKVL-133
QMS-42-2009
Total = 400 nos. combined.
MAY
N/A
21.
Centre Pivot Rubber
Bush for WDP1,
WDG2
SK.VL-028A,
SK.VL-128,
SKVL-266
QMS-42-2009
Total = 100 nos. combined.
MAY
N/A
22.
Upper & Lower rubber
washer
R–64/ 98 Rev.2
_
QMS-04-2009
10,000 nos. Combined
quantity of Upper and
Lower washers
New vendors will be
approved for Upper &
Lower rubber washer at a
time. No approval would be
given for individual
components.
MAY
32,900/-
23.
Acetal Guide Bush &
Guide Ring
C – 8215 Rev.2
SK-84102,
SK-84092
Included in
spec.
15,000 nos. Acetal Guide
Bush. Guide ring shall not
be counted.
SEP
12,925/-
(Type test charge),
Rs 8,225/-
(Product test
charge)
24.
Nylon-66 brake gear
bushes
WD –04 – Nylon
Bush –02
SK-81039
QMS-15-2009
100,000 Nos.
SEP
16,450/-
(Type test charge),
8225/-
( Product test
charge) each
25.
High tensile CBC
coupler & its compo-
nents for freight stock
48-BD-2008
SK-62724
QMS-10-2009
2,000 Nos.
NOV
N/A
Coupler Body
48-BD-2008
SK-62724, Item-1
2,000 Nos.
Knuckle
48-BD-2008
SK-62724, Item-2
4,000 Nos.
Lock
48-BD-2008
SK-62724, Item-8
4,000 Nos.
Knuckle Thrower
48-BD-2008
SK-62724, Item-9
2,000 Nos.
Knuckle Pivot Pin
48-BD-2008
SK-62724, Item-4
2,000 Nos.
Toggle
48-BD-2008
SK-62724, Item-5
2,000 Nos.
Universal Lock Lift
Lever Connector
48-BD-2008
SK-62724, Item-6
Lock Lift Hook
48-BD-2008
SK-62724, Item-7
Coupler Yoke
48-BD-2008
SK-62724, Item-3
2,000 Nos.
Yoke Pin
48-BD-2008
SK-62724,Item-12
2,000 Nos.
Yoke Pin Support
48-BD-2008
WA/BD-4462
2,000 Nos.
Striker Casting(N.T.)
48-BD-2008
WA/BD-4460
2,000 Nos.
Striker Casting Wear
Plate
48-BD-2008
WD-87056-S-01
2,000 Nos
Shank Wear Plate
48-BD-2008
SK-62724
Item-10
2000 Nos.
ISO9001:2008
Document No: QM-M-7.1-2
Version No: 1.2
Date Effective: 23.08.2013
Document Title: List of items controlled by QA(Mech) Dte. indicating upgradation quantity, testing charges for testing in RDSO
ARO/ QA(Mech)
Director/ QA(Mech)
Printed: 23.08.2013
Prepared By:
Issued By:
Page 6 of 8
26.
Alliance II Coupler &
its components
24–BD–79
SK-79555
QMS-10-2009
400 Nos.
NOV
N/A
Coupler body
SK-79556 Item 1
400 Nos.
Knuckle
SK-79556 Item 4
400 Nos.
Lock
SK-79556 Item 2
400 Nos.
Knuckle thrower/kicker
SK-79556 Item-3
400 Nos.
Lock lift lever hook/
Rotary lever
SK-79556 Item 6
400 Nos.
Toggle/Bottom lifter
SK-79556 Item 5
400 Nos.
Striker casting
SK-79557 Item 1
400 Nos.
Yoke pin support with
wear plate
SK-79557 Item 3
400 Nos.
Lock Lift Connector
SK-79556
400 Nos.
27.
High Tensile CBC
Coupler & its
components for
locomotives
56-BD-2007
QMS-10-2009
500 nos.
NOV
N/A
28.
High Capacity Draft
Gear
49-BD-07
WD-81010-S-03
QMS-10-2009
2000 nos. Draft Gear
Assembly
NOV
N/A
29.
Knuckle pin with
washer
48-BD-2008
SK-62724 Item-4
QMS-36-2009
2,000 Nos.
NOV
N/A
30.
Yoke Pin
48-BD-2008
SK-62724 Item-12
QMS-36-2009
2,000 Nos.
NOV
N/A
31.
Knuckle Thrower
48-BD-2008
SK-62724 Item-9
2,000 Nos.
NOV
N/A
32.
Locomotive side
buffer assembly and
its spares
MP.0.41.00.02
QMS-44-2009
_
JUL
N/A
33.
Casnub bogie and its
components
WD-21-Casnub-
22NLB Bogie-93
Rev.2 July 02
Amnd.2 of Oct’04,
WD-17-Casnub-
22HS-Bogie-92
Rev.3, WD-34-
Casnub-22-HS
(Mod-I)-2004
Amnd.1
QMS-09-2009
Total 1,500 nos. Casnub
bogies. (All types of casnub
bogies combined, excluding
CONCOR bogie)
DEC
N/A
Cast steel side frame
WD-89067-S/3
Cast steel bolster
WD-89067-S/4
WD-92058-S/3
Centre pivot assembly
(top & bottom)
WD-85079-S/2 &
UIC/IRS bogie
stock
4,000 nos. combined
quantity of Centre pivot top
& Centre pivot bottom (WD-
97049-S/3, Alt. 3 & WD-
85079-S/2 &UIC/IRS bogie
stock)
Wedge
SK-77579
2,000 Nos.
Side Bearer Housing
SK-69594 Item 4,
WD-92093-S/1
3,000 Nos.
End piece & Sturt
Casting for Brake
Beam
WD-89033-S/1
3,000 Nos.
Brake Beam for
Casnub 22W(M)
WD-85084-S-1
3,000 Nos.
34.
Cast Steel bogies for
CONCOR flat wagons
CONTR.9404-S/2
for BLCA/BLCB &
BLLAB/BLLB
CONTR.LCCF
20(C)-96 (Rev.2)
QMS-09-2009
500 nos. CONCOR bogie
DEC
N/A
Cast steel side frame
Cast steel bolster
Centre pivot assembly
(top & bottom)
Wedge
Brake Beam
35.
Spring Plank
WD-21-Casnub-
22NLB Bogie-93
Rev 2
SK-69594 Item 1
QMS-23-2009
2,000 nos. (combined
quantity of all types shall be
counted as upgradation
quantity)
DEC
N/A
36.
Centre Pivot Washer
WD-85079-S-2
QMS-06-2009
4,000 nos.
MAY
15,275/-
ISO9001:2008
Document No: QM-M-7.1-2
Version No: 1.2
Date Effective: 23.08.2013
Document Title: List of items controlled by QA(Mech) Dte. indicating upgradation quantity, testing charges for testing in RDSO
ARO/ QA(Mech)
Director/ QA(Mech)
Printed: 23.08.2013
Prepared By:
Issued By:
Page 7 of 8
37.
Brake Beam for freight
(Fabricated)
WD-21-Casnub-
22NLB Bogie-93
Rev 2, WD-17-
Casnub-22 HS-
Bogie-92 Rev.3
WD-89033-S/1 WD-
07052-S/1
QMS-25-2009
3,000 nos. (combined
quantity of all types shall be
counted as upgradation
quantity)
DEC
N/A
38.
Narrow & Wide Jaw
Adapters
AB/RB-39-2002,
Rev.3,
WD–89067–S/9, SK-
7852
QMS-26-2009
3,000 nos. combined
quantity of wide jaw, narrow
jaw and modified adopters.
New vendors will be
approved for all the 3 items
at a time. No approval would
be given for individual type
of adopters.
JUL
N/A
39
Side Frame Key
SK-69594 Item 6
QMS-24-2009
5,000 Nos.
DEC
N/A
40.
Cartridge Taper Roller
Bearing for BG Freight
stock
AB/RB-39-2002
Rev.3
_
20,000 nos.
JUL
N/A
41.
Locking Plate
AB/RB-39-2002
Rev.3
WD-86002/S-4,
WD-87019/S-I,
T-0-2-637
QMS-19-2009
30,000 nos.
JUL
N/A
42.
Axle end steel high
tensile cap screws
AB/RB-39-2002
Rev.3
_
QMS-43-2009
20,000 Nos.
JUL
N/A
43.
Three axle cast steel
trimount and Flexi-coil
Bogie frame & Bolster
for BG Locomotives
MP.0.4900.04
Rev.1 Oct’04,)
Drg. No., SKDL-
3812 & 3813
QMS-45:2009
DEC
44.
Bogie Bolster
Suspension Hanger
C – K105
SK –92057 &
SK –83033
Included in
spec.
3,000 nos.
APR
N/A
45.
Brake Block Hanger
C- 9808
SK-93286
Included in
spec.
3,000 nos.
APR
N/A
46.
Screw Couplings
For Freight stock
R-9-66,
For coaching
stock C-9505 Rev
Aug 2001
-
-
-
For locomotives
SKDL-2494
Included in
specification
1,000 nos. (All types shall
be counted for upgradation
quantity).
New vendors will be
approved for Screw
Couplings for coaching,
freight & loco at a time. No
approval would be given for
individual components.
NOV
N/A
47.
Draw Gear
Arrangement
C-9509 Rev 2
SK-99003 Alt -04
Included in
spec.
500 nos.
NOV
N/A
48.
Lubricated taper plug
valves
WD-06-TPV-93
WD-93066-S-01
QMS-38-2009
500 Nos.
FEB
N/A
49.
Silico-Manganses
Steel Liners & Wear
Plates for wagons
WD-21-Casnub-
22 NLB-93 Rev 2
QMS-22-2009
5,000 nos. combined
quantity of all types of liners.
New vendors will be
approved for Silico-
Manganses Steel Liners &
Wear Plates for wagons at a
time. No approval would be
given for individual liners.
JUL
N/A
*50.
Snubber Assembly for
Locomotives
_
SKDL 2089A
QMS-34-2009
2,000 nos.
APR
N/A
51.
Medium Phosphorous
Brake Blocks
M&C/MDT/
101/94
_
QMS-107-
2009
5,000 nos.
JUL
N/A
52.
Class ‘A’ foundry
IS: 12117
-
IS: 12117
-
OCT
N/A
Note: (*) Items require field trials.
(**) Testing Charges is under revision.
ISO9001:2008
Document No: QM-M-7.1-2
Version No: 1.2
Date Effective: 23.08.2013
Document Title: List of items controlled by QA(Mech) Dte. indicating upgradation quantity, testing charges for testing in RDSO
ARO/ QA(Mech)
Director/ QA(Mech)
Printed: 23.08.2013
Prepared By:
Issued By:
Page 8 of 8
5.0 Referenced Documents
The list of related documents to be referred is given below.
Ref. S. No.
Document Number
Document Name
1.
QO-D-7.1-10
Vendor sample type testing
2.
QO-D-7.1.11
Vendor changes in approved status
3.
QO-D-7.1-14
Vendor registration schedule of charges
6.0 Referenced Documents of External Origin
None
7.0 Associated Records
None
8.0 Responsibility and Authority
Activity
Responsible
Approver
Supporting
Consulted
Informed
Creation,
maintenance of
this document
Director/I&L/
LKO
ED/QA(Mech)
Staff of QA
(Mech) Dte.
All Zonal office of QA
(Mech) Dte.
Requirement of
deviation from
this form
template.
Director/I&L/
LKO
ED/QA(Mech)
Respective
AIE/I&L
MR/ISO
Cell
All Zonal office of QA
(Mech) Dte.
9.0 Abbreviations:
QA
Quality Assurance
ED/QA (Mech)
Executive Director/ Quality Assurance (Mechanical)
RDSO
Research Designs & Standards Organisation
M&C
Metallurgical & Chemical
ARO
Assistant Research Officer
STR
Schedule of Technical Requirements

Navigation menu