Quectel MC20 GNSS AT Commands Manual V1.1
User Manual:
Open the PDF directly: View PDF
Page Count: 19
- About the Document
- Contents
- Table Index
- 1 Introduction
- 2 AT Commands for MC20 GNSS
- 2.1. Overview of AT Commands for MC20 GNSS
- 2.1.1. AT+QGNSSC Control Power Supply of GNSS Module
- 2.1.2. AT+QGNSSRD Read GNSS Navigation Information
- 2.1.3. AT+QGNSSCMD Send Commands to GNSS Module
- 2.1.4. AT+QGNSSTS Get Time Synchronization Status for GNSS Module
- 2.1.5. AT+QGNSSEPO Enable/Disable EPOTM Function
- 2.1.6. AT+QGREFLOC Set Reference Location Information for QuecFastFix Online
- 2.1.7. AT+QGEPOAID Trigger EPOTM Function
- 2.1. Overview of AT Commands for MC20 GNSS
- 3 Examples
- 4 Appendix