Quectel QFlash User Guide V2.5
Quectel_QFlash_User_Guide_V2.5
Quectel_QFlash_User_Guide_V2.5
Quectel_QFlash_User_Guide_V2.5
Quectel_QFlash_User_Guide_V2.5
Quectel_QFlash_User_Guide_V2.5
User Manual:
Open the PDF directly: View PDF 
.
Page Count: 36
| Download | |
| Open PDF In Browser | View PDF |
QFlash User Guide Rev. QFlash_User_Guide_V2.5 Date: 2018-09-14 Status: Released www.quectel.com QFlash User Guide Our aim is to provide customers with timely and comprehensive service. For any assistance, please contact our company headquarters: Quectel Wireless Solutions Co., Ltd. 7th Floor, Hongye Building, No.1801 Hongmei Road, Xuhui District, Shanghai 200233, China Tel: +86 21 5108 6236 Email: info@quectel.com Or our local office. For more information, please visit: http://www.quectel.com/support/sales.htm For technical support, or to report documentation errors, please visit: http://www.quectel.com/support/technical.htm Or email to: support@quectel.com GENERAL NOTES QUECTEL OFFERS THE INFORMATION AS A SERVICE TO ITS CUSTOMERS. THE INFORMATION PROVIDED IS BASED UPON CUSTOMERS’ REQUIREMENTS. QUECTEL MAKES EVERY EFFORT TO ENSURE THE QUALITY OF THE INFORMATION IT MAKES AVAILABLE. QUECTEL DOES NOT MAKE ANY WARRANTY AS TO THE INFORMATION CONTAINED HEREIN, AND DOES NOT ACCEPT ANY LIABILITY FOR ANY INJURY, LOSS OR DAMAGE OF ANY KIND INCURRED BY USE OF OR RELIANCE UPON THE INFORMATION. ALL INFORMATION SUPPLIED HEREIN IS SUBJECT TO CHANGE WITHOUT PRIOR NOTICE. COPYRIGHT THE INFORMATION CONTAINED HERE IS PROPRIETARY TECHNICAL INFORMATION OF QUECTEL WIRELESS SOLUTIONS CO., LTD. TRANSMITTING, REPRODUCTION, DISSEMINATION AND EDITING OF THIS DOCUMENT AS WELL AS UTILIZATION OF THE CONTENT ARE FORBIDDEN WITHOUT PERMISSION. OFFENDERS WILL BE HELD LIABLE FOR PAYMENT OF DAMAGES. ALL RIGHTS ARE RESERVED IN THE EVENT OF A PATENT GRANT OR REGISTRATION OF A UTILITY MODEL OR DESIGN. Copyright © Quectel Wireless Solutions Co., Ltd. 2018. All rights reserved. QFlash_User_Guide 1 / 35 QFlash User Guide About the Document History Revision Date Author Description 1.0 2012-10-30 Yolanda YAO Initial 1.1 2012-12-02 Yolanda YAO Updated QFlash version to 1.1 1.2 2013-02-25 Karen REN Updated QFlash version to 1.4 1.3 2013-05-20 Apple SONG/ Karen REN Added USB port to upgrade firmware for U10 and UC20 module 1.4 2013-10-10 James CAI 1. 2. 1.5 2013-11-05 Lucky DOU Updated QFlash version to 2.2 1.6 2013-12-07 James CAI Updated QFlash version to 2.3 1.7 2013-12-12 Lucky DOU Updated QFlash version for UC15 1.8 2014-02-11 James CAI Updated QFlash version to 2.4 1.9 2014-02-26 Steed NING Updated QFlash version to 2.5 1.10 2014-03-18 James CAI Updated QFlash version to 2.6 1.11 2014-04-24 Anny ZHANG Updated QFlash version to 2.7 1.12 2014-06-25 James CAI Updated QFlash version to 2.8 1.13 2014-08-13 Martin LI/ Roddick SUN Updated QFlash version to 2.9 1.14 2014-10-08 Martin LI Updated QFlash version to 3.0 1.15 2014-11-11 Mario XU Updated QFlash version to 3.1 1.16 2015-03-05 Jesse ZHANG Updated QFlash version to 3.3 QFlash_User_Guide Added the way to upgrade GCxx module Updated QFlash version to 2.1 2 / 35 QFlash User Guide 1.17 2015-06-03 James CAI Updated QFlash version to 3.4 1.18 2016-03-24 James CAI Updated QFlash version to 3.5 1.19 2016-06-16 Sophie ZHU 1. 2. Added the way to upgrade Ecxx module Updated QFlash version to 3.6 1.20 2016-09-26 Dylan LIU 1. 2. Added the way to load APP firmware Updated QFlash version to 3.7 1. 2017-07-24 Abby WU/ Upton XU Added the way to upgrade SCxx and AG35 modules Updated QFlash version to 4.3 1.21 2. 2.0 2017-09-28 Joy WANG 1. Updated QFlash version to 4.4 2. Added information about applicable modules 2.1 2017-11-29 Joy WANG 1. Updated QFlash version to 4.5 2. Added the way to upgrade BC95 module 2.2 2018-01-03 Joy WANG 1. Updated QFlash version to 4.6 2. Added a note about firmware downloading in Firehose mode for Ecxx modules 2.3 2018-04-25 Kitty WANG Updated QFlash version to 4.7 2.4 2018-05-21 Kitty WANG 1. Updated QFlash version to 4.8 2. Added notes about tool and firmware paths Kitty WANG 1. Updated QFlash version to 4.9 2. Added the way to upgrade EM12, BC95-G, BC68 and BC66 modules 2.5 2018-09-14 QFlash_User_Guide 3 / 35 QFlash User Guide Contents About the Document ................................................................................................................................... 2 Contents ....................................................................................................................................................... 4 Figure Index ................................................................................................................................................. 5 1 Introduction .......................................................................................................................................... 7 1.1. OS and Version ........................................................................................................................... 7 1.2. Applicable Modules ..................................................................................................................... 7 1.3. About QFlash Tool....................................................................................................................... 8 2 Firmware Upgrade Procedures .......................................................................................................... 9 2.1. Configure Serial Port and Baud Rate ......................................................................................... 9 2.1.1. Set Serial Port ................................................................................................................ 10 2.1.1.1. COM Port Selection for Mxx/GCxx/BCxx Modules ........................................ 10 2.1.1.2. COM Port Selection for UGxx Modules...........................................................11 2.1.1.3. COM Port Selection for UCxx/ECxx/EGxx/Ex06/EM05/AG35/BG96/EM12 Modules ........................................................................................................................11 2.1.1.4. COM Port Selection for SCxx/SGxx Modules ................................................ 12 2.1.2. Set Baud Rate ................................................................................................................ 13 2.2. Load Firmware Files ................................................................................................................. 14 2.2.1. Load APP Firmware for OpenCPU or Quecopen Modules ........................................... 14 2.3. Upgrade the Firmware .............................................................................................................. 16 2.4. Abnormalities ............................................................................................................................ 21 2.4.1. Selected a Wrong Serial Port ......................................................................................... 21 2.4.2. Connected to an Occupied Serial Port .......................................................................... 25 2.4.3. Selected an Unsupported Baud Rate ............................................................................ 27 2.4.4. Selected an Invalid Load File ......................................................................................... 28 2.4.5. Power Supply is Abnormal ............................................................................................. 31 2.4.6. USB to RS-232 Converter Cable is Abnormal ............................................................... 35 QFlash_User_Guide 4 / 35 QFlash User Guide Figure Index FIGURE 1: ABOUT THE TOOL ........................................................................................................................... 8 FIGURE 2: MAIN INTERFACE ............................................................................................................................ 9 FIGURE 3: SELECT THE CORRECT SERIAL PORT FOR MXX/GCXX/BCXX MODULES ............................ 10 FIGURE 4: NO NEED TO SELECT COM PORT FOR UGXX MODULES......................................................... 11 FIGURE 5: SELECT THE USB DM PORT FOR UCXX/ECXX/EGXX/EX06/EM05/AG35/BG96/EM12 MODULES ................................................................................................................................................. 12 FIGURE 6: SELECT THE HS-USB DIAGNOSTICS 9091 PORT FOR SCXX/SGXX MODULES .................... 12 FIGURE 7: SELECT THE BAUD RATE............................................................................................................. 13 FIGURE 8: SELECT THE FILE TO BE DOWNLOADED .................................................................................. 14 FIGURE 9: SELECT THE .CFG FILE ................................................................................................................ 15 FIGURE 10: SELECT THE MODULE TYPE ..................................................................................................... 15 FIGURE 11: CLICK THE START BUTTON ....................................................................................................... 16 FIGURE 12: START TO UPGRADE AFTER RESTARTING THE MXX MODULES ......................................... 17 FIGURE 13: START TO UPGRADE AFTER RESTARTING THE BCXX MODULES ....................................... 18 FIGURE 14: START TO UPGRADE FIRMWARE ............................................................................................. 19 FIGURE 15: SUCCESSFUL UPGRADE ........................................................................................................... 20 FIGURE 16: CONNECTED TO A WRONG SERIAL PORT (MXX MODULES) ................................................ 21 FIGURE 17: CONNECTED TO A WRONG SERIAL PORT (GCXX MODULES) .............................................. 22 FIGURE 18: CONNECTED TO A WRONG SERIAL PORT (UCXX MODULES) .............................................. 22 FIGURE 19: CONNECTED TO A WRONG SERIAL PORT (ECXX/EG9X/EX06/EM05/BG96/EM12 MODULES) ................................................................................................................................................................... 23 FIGURE 20: CONNECTED TO A WRONG SERIAL PORT (SCXX/SGXX MODULES) ................................... 23 FIGURE 21: CONNECTED TO A WRONG SERIAL PORT (AG35 MODULE) ................................................. 24 FIGURE 22: CONNECTED TO A WRONG SERIAL PORT (BCXX MODULES) .............................................. 24 FIGURE 23: CONNECTED TO AN OCCUPIED SERIAL PORT (MXX MODULES) ........................................ 25 FIGURE 24: CONNECTED TO AN OCCUPIED SERIAL PORT (GCXX MODULES) ...................................... 25 FIGURE 25: CONNECTED TO AN OCCUPIED SERIAL PORT (UCXX/ECXX/EG9X/EX06/SCXX/SGXX/EM05/AG35/ BG96/EM12 MODULES) .................................... 26 FIGURE 26: CONNECTED TO AN OCCUPIED SERIAL PORT (BCXX MODULES) ...................................... 26 FIGURE 27: AN UNSUPPORTED BAUD RATE IS SELECTED (MXX MODULES) ........................................ 27 FIGURE 28: AN UNSUPPORTED BAUD RATE IS SELECTED (GCXX MODULES) ...................................... 28 FIGURE 29: AN INVALID SCATTER FILE IS SELECTED (MXX MODULES) ................................................. 28 FIGURE 30: AN INVALID LOAD FILE IS SELECTED (GCXX MODULES) ...................................................... 29 FIGURE 31: AN INVALID LOAD FILE IS SELECTED (UCXX MODULES) ...................................................... 29 FIGURE 32: AN INVALID LOAD FILE IS SELECTED (ECXX/EG9X MODULES)............................................ 30 FIGURE 33: AN INVALID LOAD FILE IS SELECTED (EX06/AG35/BG96/EM12 MODULES) ........................ 30 FIGURE 34: AN INVALID LOAD FILE IS SELECTED (EM05 MODULE) ......................................................... 31 FIGURE 35: POWER SUPPLY IS ABNORMAL (MXX MODULES) .................................................................. 31 FIGURE 36: POWER SUPPLY IS ABNORMAL (GCXX MODULES)................................................................ 32 FIGURE 37: POWER SUPPLY IS ABNORMAL (UCXX/ECXX/EG9X/EX06/EM05/AG35/BG96/EM12 MODULES) ................................................................................................................................................ 32 FIGURE 38: POWER SUPPLY IS ABNORMAL (UGXX MODULES)................................................................ 33 QFlash_User_Guide 5 / 35 QFlash User Guide FIGURE 39: POWER SUPPLY IS ABNORMAL (SCXX/SGXX MODULES) ..................................................... 33 FIGURE 40: POWER SUPPLY IS ABNORMAL (BCXX MODULES) ................................................................ 34 FIGURE 41: USB TO RS-232 CONVERTER CABLE IS ABNORMAL ............................................................. 35 QFlash_User_Guide 6 / 35 QFlash User Guide 1 Introduction 1.1. OS and Version This document mainly introduces how to upgrade the firmware with “QFlash” upgrade tool supplied by Quectel. The tool can run on a PC without installation if the OS is among the ones listed below: Windows XP Windows 7 Windows 8 Windows 10 Any newer version of the tool will be informed and provided in advance. 1.2. Applicable Modules QFlash is applicable to the following Quectel modules. Table 1: Applicable Modules NB-loT Module Series BCxx: BC95/BC95-G/BC68/BC66 module ECxx: includes EC20/EC25/EC21 modules EG9x: includes EG91/EG95 modules Ex06: includes EP06/EG06/EM06 modules LTE Module Series SCxx: includes SC20/SC60 modules SGxx: includes SG30/SG36 modules EM05 module AG35 module QFlash_User_Guide 7 / 35 QFlash User Guide BG96 module EM12 module UMTS/HSPA(+) Module Series UCxx: includes UC15/UC20 modules UGxx: includes UG95/UG96 modules Mxx: includes M10/M66/M72/M80/M85/M95/MC60 modules GSM/GPRS Module Series GCxx: GC10 module 1.3. About QFlash Tool The QFlash tool developed by Quectel is shown as below. Figure 1: About the Tool NOTE The paths where the tool and firmware are stored should NOT contain any spaces, and English characters are preferred. QFlash_User_Guide 8 / 35 QFlash User Guide 2 Firmware Upgrade Procedures The firmware can be upgraded through the following three steps by the QFlash tool. Step 1: Set serial port and baud rate. Step 2: Load firmware files. Step 3: Upgrade the firmware. The following describes the details of how to use the tool to upgrade firmware. 2.1. Configure Serial Port and Baud Rate When the QFlash tool is opened, the main interface will show as below. Figure 2: Main Interface QFlash_User_Guide 9 / 35 QFlash User Guide 2.1.1. Set Serial Port 2.1.1.1. COM Port Selection for Mxx/GCxx/BCxx Modules Click “COM Port” dropdown list to select the COM port through which the firmware is upgraded. As shown in the following figure. Figure 3: Select the Correct Serial Port for Mxx/GCxx/BCxx Modules NOTES 1. 2. 3. 4. For Mxx modules, it is the main UART to be used for firmware upgrade. After the port is selected, please manually restart the module. For GCxx modules, it is the USB port to be used for firmware upgrade, and then the module will be automatically restarted. For BC95 modules, it is the main UART to be used for firmware upgrade. After the port is selected, please click the “Start” button to wait for the prompt “Module Reset By Hand”, and then manually restart the module. For BC66 module, it is the USB UART Ch A to be used for firmware upgrade. After the port is selected, please click the “Start” button to wait for the prompt “[INFO]Start connect with QFlash_User_Guide 10 / 35 QFlash User Guide 5. target,Please reset DUT...”, and then manually restart the module. For BC95-G and BC68 modules, it is the USB UART Ch A to be used for firmware upgrade. After the port is selected, please click the “Start” button to wait for the prompt “reset”, and then manually restart the module. 2.1.1.2. COM Port Selection for UGxx Modules For UGxx modules, it is the USB port to be used for firmware upgrade, and it can be selected automatically. When firmware files are uploaded, “COM Port” dropdown list will display “USB” in gray. Then the module will be automatically restarted and ready to upgrade, and the USB port will be identified. The interface is shown in the following figure. Figure 4: No Need to Select COM Port for UGxx Modules 2.1.1.3. COM Port Selection for UCxx/ECxx/EGxx/Ex06/EM05/AG35/BG96/EM12 Modules For UCxx/ECxx/EGxx/Ex06/EM05/AG35/BG96/EM12 modules, the USB DM port can be used for firmware upgrade. Click “COM Port” dropdown list and select the USB DM port for upgrade, as shown in the following figure. QFlash_User_Guide 11 / 35 QFlash User Guide Figure 5: Select the USB DM Port for UCxx/ECxx/EGxx/Ex06/EM05/AG35/BG96/EM12 Modules 2.1.1.4. COM Port Selection for SCxx/SGxx Modules For SCxx/SGxx modules, the HS-USB Diagnostics 9091 port can be used for firmware upgrade. Click “COM Port” dropdown list and select the HS-USB Diagnostics 9091 port for upgrade, as shown in the following figure. Figure 6: Select the HS-USB Diagnostics 9091 Port for SCxx/SGxx Modules QFlash_User_Guide 12 / 35 QFlash User Guide 2.1.2. Set Baud Rate Click the “Baudrate” dropdown list and select an appropriate baud rate. It is recommended to select 921600 for GCxx modules, 9600 for BCxx modules and 460800 for other Quectel modules, as shown in the following figure. Figure 7: Select the Baud Rate NOTES 1. Baud rates have many different values, and it is the hardware environment that determines whether a specified baud rate can be supported. If not supported, an error message will be returned. 2. Please set baud rate into 921600 when upgrading firmware for GCxx modules. Other baud rates may lead to an upgrading failure. 3. When upgrading firmware for BCxx modules, the baud rate is 9600 by default. 4. Baud rate setting is unnecessary for USB virtual ports. QFlash_User_Guide 13 / 35 QFlash User Guide 2.2. Load Firmware Files Step 1: Click the button “Load FW Files”. Step 2: Select the .txt, .cfg, .mbn, .lod, .fls or .fwpkg file which needs to be downloaded to the module. Figure 8: Select the File to be Downloaded NOTE The path where the firmware is stored should NOT contain any spaces, and English characters are preferred. 2.2.1. Load APP Firmware for OpenCPU or Quecopen Modules This step is only necessary for Quectel OpenCPU or Quecopen modules. Step 1: Click the button “Load FW Files”, and select the .cfg file which needs to be downloaded to the module. QFlash_User_Guide 14 / 35 QFlash User Guide Figure 9: Select the .cfg File NOTE The path where the firmware is stored should NOT contain any spaces, and English characters are preferred. Step 2: Click the “Module Type” dropdown list and choose an appropriate module type. Figure 10: Select the Module Type QFlash_User_Guide 15 / 35 QFlash User Guide 2.3. Upgrade the Firmware Step 1: Click “Start” button to upgrade the firmware. There is no “Stop” button while upgrading firmware for GCxx/UCxx/UGxx/ECxx/EG9x/Ex06/SCxx/SGxx/BCxx/EM05/AG35/BG96/EM12 modules Figure 11: Click the Start Button NOTES 1. Please note that it is NOT permitted to stop the upgrading process, and please do NOT remove USB or terminate the downloading process before upgrading is completed. 2. For ECxx modules, if the firmware contains a Firehose folder, then it will be downloaded in Firehose mode by default. QFlash_User_Guide 16 / 35 QFlash User Guide Step 2: For Mxx/BC95 modules, switch the D/L to “ON” on EVB after clicking “Start” button in 30 seconds, and then manually restart the module. It will start to upgrade the firmware as shown in the following figure. Figure 12: Start to Upgrade after Restarting the Mxx Modules NOTE On Mxx modules, please make sure the EVB is powered by 5V power supply when switching the D/L to “ON”, and then manually restart the module. QFlash_User_Guide 17 / 35 QFlash User Guide Figure 13: Start to Upgrade after Restarting the BCxx Modules NOTE On BC95 module, please make sure the EVB is powered by 5V power supply when switching the D/L to “ON”, and click the “Start” button to wait for the prompt “Module Reset By Hand”, then manually restart the module. For BC95-G, BC68 and BC66 modules upgrading firmware through TE-B, please wait for the prompt “reset” (for BC95-G/BC68) or “[INFO]Start connect with target,Please reset DUT...” (for BC66) after clicking the “Start” button, and then manually restart the modules. QFlash_User_Guide 18 / 35 QFlash User Guide If users are upgrading the firmware for GCxx/UCxx/UGxx/ECxx/EG9x/Ex06/SCxx/SGxx/EM05/AG35/ BG96/EM12 modules, the module will be restarted automatically, so there is no need to restart the module. Please refer to the following figure. Figure 14: Start to Upgrade Firmware NOTE If there is no EVB for module firmware upgrading, please drive the PWRKEY pin to low level after clicking the “Start” button in 30 seconds. QFlash_User_Guide 19 / 35 QFlash User Guide Step 3: “FW upgrade success” will be shown on the interface after the firmware has been successfully upgraded, as shown in the following figure. Figure 15: Successful Upgrade QFlash_User_Guide 20 / 35 QFlash User Guide 2.4. Abnormalities Abnormalities may be caused by incorrect parameter of baud rate, damaged EVB/TE-B or invalid files, etc. The following illustrates some common abnormalities. 2.4.1. Selected a Wrong Serial Port Figure 16: Connected to a Wrong Serial Port (Mxx Modules) NOTE After selecting a correct serial port, if the Mxx modules are not restarted, then the error message will be the same as that of selecting a wrong serial port. QFlash_User_Guide 21 / 35 QFlash User Guide Figure 17: Connected to a Wrong Serial Port (GCxx Modules) Figure 18: Connected to a Wrong Serial Port (UCxx Modules) QFlash_User_Guide 22 / 35 QFlash User Guide Figure 19: Connected to a Wrong Serial Port (ECxx/EG9x/Ex06/EM05/BG96/EM12 Modules) Figure 20: Connected to a Wrong Serial Port (SCxx/SGxx Modules) QFlash_User_Guide 23 / 35 QFlash User Guide Figure 21: Connected to a Wrong Serial Port (AG35 Module) Figure 22: Connected to a Wrong Serial Port (BCxx Modules) QFlash_User_Guide 24 / 35 QFlash User Guide 2.4.2. Connected to an Occupied Serial Port Figure 23: Connected to an Occupied Serial Port (Mxx Modules) Figure 24: Connected to an Occupied Serial Port (GCxx Modules) QFlash_User_Guide 25 / 35 QFlash User Guide Figure 25: Connected to an Occupied Serial Port (UCxx/ECxx/EG9x/Ex06/SCxx/SGxx/EM05/AG35/ BG96/EM12 Modules) Figure 26: Connected to an Occupied Serial Port (BCxx Modules) QFlash_User_Guide 26 / 35 QFlash User Guide 2.4.3. Selected an Unsupported Baud Rate Figure 27: An Unsupported Baud Rate is Selected (Mxx Modules) NOTE For Mxx modules, if an unsupported baud rate is selected, the tool will stop to run and no error message will be prompted. In such case, please click the “Stop” button to re-select a supported baud rate to upgrade. QFlash_User_Guide 27 / 35 QFlash User Guide Figure 28: An Unsupported Baud Rate is Selected (GCxx Modules) 2.4.4. Selected an Invalid Load File Figure 29: An Invalid Scatter File is Selected (Mxx Modules) QFlash_User_Guide 28 / 35 QFlash User Guide Figure 30: An Invalid Load File is Selected (GCxx Modules) Figure 31: An Invalid Load File is Selected (UCxx Modules) QFlash_User_Guide 29 / 35 QFlash User Guide Figure 32: An Invalid Load File is Selected (ECxx/EG9x Modules) Figure 33: An Invalid Load File is Selected (Ex06/AG35/BG96/EM12 Modules) QFlash_User_Guide 30 / 35 QFlash User Guide Figure 34: An Invalid Load File is Selected (EM05 Module) 2.4.5. Power Supply is Abnormal Figure 35: Power Supply is Abnormal (Mxx Modules) QFlash_User_Guide 31 / 35 QFlash User Guide Figure 36: Power Supply is Abnormal (GCxx Modules) Figure 37: Power Supply is Abnormal (UCxx/ECxx/EG9x/Ex06/EM05/AG35/BG96/EM12 Modules) QFlash_User_Guide 32 / 35 QFlash User Guide Figure 38: Power Supply is Abnormal (UGxx Modules) Figure 39: Power Supply is Abnormal (SCxx/SGxx Modules) QFlash_User_Guide 33 / 35 QFlash User Guide Figure 40: Power Supply is Abnormal (BCxx Modules) QFlash_User_Guide 34 / 35 QFlash User Guide 2.4.6. USB to RS-232 Converter Cable is Abnormal Figure 41: USB to RS-232 Converter Cable is Abnormal QFlash_User_Guide 35 / 35
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Extract, Print high-res Author : Yolanda Create Date : 2018:09:14 17:46:15+08:00 Modify Date : 2018:09:14 17:46:47+08:00 Language : zh-CN XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : Yolanda Creator Tool : Microsoft® Word 2010 Metadata Date : 2018:09:14 17:46:47+08:00 Producer : Microsoft® Word 2010 Document ID : uuid:f68272ae-5437-4279-a069-749d073d1a38 Instance ID : uuid:c36cfae8-9fc6-4797-93bc-2bc6be79437f Page Mode : UseOutlines Page Count : 36EXIF Metadata provided by EXIF.tools