RF200V

User Manual: RF200V

Open the PDF directly: View PDF PDF.
Page Count: 3

DownloadRF200V
Open PDF In BrowserView PDF
REF:
GENIE CCTV
DATE:
30/10/12
ISSUE No: 2012/1

TECHNICAL DATA SHEET

RF200V

5.8GHz Wireless Video Link

KEY FEATURES							 ORDERING INFORMATION
		

•
•
•
•
•
•
•
•
•
•
•
•
•

5.8GHz
IP65 Rated
7x RF Channels
DC12V Operation
High Quality Audio & Video
250m Range in Ideal Conditions (Requires Line of Sight)
LED Status to Monitor Transmitter
7x LED Signal Strength Meter (RSSI)
Digital Input for PIR, External Switch etc.
Volt Free Outputs for both Tamper and Input Channels
Directional antennas (Reduced Interference)
Heavy Duty Wall Bracket for X & Y Movement
Tamper Monitors Case Switches, External
Input & Loss of Transmitter

GENIE CCTV LTD.

CCTV House, City Park, Watchmead, Welwyn Garden
City, Hertfordshire, AL7 1LT, United Kingdom

Tel +44(0)1707 330541
Fax +44(0)1707 330543

RF200V

5.8GHz Wireless Video Link

Email info@geniecctv.com

www.geniecctv.com

REF:
GENIE CCTV
DATE:
30/10/12
ISSUE No: 2012/1

TECHNICAL DATA SHEET

Tx

Rx

Rx Wall Bracket

DESCRIPTION
The RF200V is a high quality seven channel 5.8GHz audio / video wireless interface designed specifically for
the CCTV industry. The kit consists of a Transmitter, Receiver and Wall Bracket.
The Transmitter and receiver both use a directional patch antenna to reduce external interference. The
receiver has a built in 7 bar signal strength meter to obtain the best possible reception during an installation;
a very important stage to help guarantee a reliable wireless video link.
Both units are housed in a small IP65 enclosure, so mounting outdoors is possible without the need for
additional external waterproof enclosures. The receiver also comes with a mounting bracket providing X & Y
movement for alignment purposes.
In addition this video link also transmits a digital input and tamper circuit. The digital input can be used for a
PIR sensor or door contact etc. at the transmitter end and drives a volt free relay at the receiver. The output
can be programmed as a momentary output, or a timed output from 1 second to 30 minutes.
The tamper channel monitors an external input at the transmitter, both transmitter and receiver cases for lid
removal and loss of the wireless link. The output is via a normally closed volt free contact.
Configuration of the RF200V is via a simple one button programming method. On the transmitter only the
RF channel needs to be programmed. The receiver has two steps: the first is to pair the receiver to the
transmitter and the second (if required) is to set the output timer. The whole process takes less than five
minutes to configure.

GENIE CCTV LTD.

CCTV House, City Park, Watchmead, Welwyn Garden
City, Hertfordshire, AL7 1LT, United Kingdom

Tel +44(0)1707 330541
Fax +44(0)1707 330543

Email info@geniecctv.com

www.geniecctv.com

REF:
GENIE CCTV
DATE:
30/10/12
ISSUE No: 2012/1

TECHNICAL DATA SHEET

TECHNICAL SPECIFICATION
Model Number
ELECTRICAL

RF200V

Operating Voltage

11 - 13V DC

Operating Current (Tx)
Operating Current (Rx)

150 mA (Max.)
200 mA (Max.)

Relay Max. Working Voltage (Volt Free)
Relay Max. Working Current
Video Input / Output
Video Frequency Response
Audio Input / Output
Audio Frequency Response
RADIO
Operating Frequencies
Transmit Power
Video - Audio Modulation / Demodulation
Video Deviation
Audio Deviation
MECHANICAL
Receiver Case Size (With Grommet)
Transmitter Case Size (With Grommet)
Case Rating
ENVIRONMENTAL
Temperature Range
Relative Humidity

30V AC/DC
1A
1V P-P (+/- 0.2V)
+/- 5dB max 50Hz 5.5MHz
1V P-P
50Hz—20KHz
5725 - 5875MHz
<= 25mW (14dBm)
FM-FM
4MHz (SSB)
75KHz (SSB)
140 x 65 x 40mm
140 x 65 x 40mm
IP65
-10 to +55 Degrees
95% Non-Condensing

Features and specifications are subject to change for further improvement without any notice

GENIE CCTV LTD.

CCTV House, City Park, Watchmead, Welwyn Garden
City, Hertfordshire, AL7 1LT, United Kingdom

Tel +44(0)1707 330541
Fax +44(0)1707 330543

Email info@geniecctv.com

www.geniecctv.com
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 5.3-c011 66.145661, 2012/02/06-14:56:27
Instance ID                     : uuid:354b4f55-a5e3-4240-a83c-ca3157357006
Original Document ID            : adobe:docid:indd:e74e1545-9074-11df-902c-e4659f995932
Document ID                     : xmp.id:F77F1174072068118083F9D69D680B12
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:0180117407206811822A825B7B5587B4
Derived From Document ID        : xmp.did:AD754B5A1C2068118083858336091012
Derived From Original Document ID: adobe:docid:indd:e74e1545-9074-11df-902c-e4659f995932
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Macintosh)
History Changed                 : /
History When                    : 2012:11:30 08:23:23Z
Create Date                     : 2012:11:30 08:23:23Z
Modify Date                     : 2012:11:30 08:23:29Z
Metadata Date                   : 2012:11:30 08:23:29Z
Creator Tool                    : Adobe InDesign CS6 (Macintosh)
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Count                      : 3
Creator                         : Adobe InDesign CS6 (Macintosh)
EXIF Metadata provided by EXIF.tools

Navigation menu