Rake AR8 AR10 AR12 AR12(EMAIL)
User Manual: Rake AR8-AR10-AR12(EMAIL)
Open the PDF directly: View PDF 
.
Page Count: 40
| Download | |
| Open PDF In Browser | View PDF |
OPERATOR’S MANUAL AR08 - AR10 - AR12 ACTION RAKES READ AND UNDERSTAND THIS MANUAL BEFORE OPERATING THIS EQUIPMENT. UNSAFE OPERATION OR MAINTENANCE OF THIS EQUIPMENT CAN RESULT IN SERIOUS INJURY OR DEATH. OPERA TOR’S MANU AL OPERAT MANUAL AND PAR TS LIST ARTS Revision #1 AR08 Starting Serial #212016 AR10 Starting Serial #214020 AR12 Starting Serial #216019 Manufactured By HSMFG0112 H&S MANUFACTURING CO.,INC. P.O. BOX 768 (715) 387-3414 FAX (715) 384-5463 MARSHFIELD, WISCONSIN 54449 H&S AR8 - AR10 - AR12 Rakes OPERATOR’S & PARTS MANUAL CONTENTS Warranty & Warranty Registration Card. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Dealer Pre-Delivery & Delivery Checklist. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6 Be Alert Symbol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Explanation of Safety Signs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Danger - Warning Signs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9 Warning - Owner Must Read and Understand. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Bolt Torque Chart. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Set-Up & Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Preparing for Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Transporting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Operation & Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15-17 Options & Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Lubrication Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19-20 Decal Location & Identification. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21-23 Troubleshooting Guide. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 Instructions for Ordering Parts - About Improvements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26-34 Parts Notes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35-36 WARRANTY H&S WARRANTY H&S Manufacturing Co., Inc. (“H&S”) warrants this product to be free from defect in material and workmanship. Except as noted below, this warranty term is twelve (12) months from the date of delivery of the product to the original purchaser by an authorized H&S dealer. Under this warranty , H&S will repair or replace, at its option, any covered part which is found to be defective in material or workmanship during the applicable warranty term. In no case will the covered repair cost of a part or parts exceed the replacement cost of that part. Warranty service must be performed by H&S or a dealer authorized by H&S to sell and/or service the product involved, which will use only new or remanufactured parts or components furnished by H&S. This warranty includes approved parts and labor to fix the product but does not include, and the purchaser is responsible for, any service call and/or transportation of the product to and from the dealer’s place of business, for any premium charged for overtime labor requested by the purchaser, and for any service work not directly related to any defect covered under this warranty. This warranty includes only those components of the product manufactured by H&S. Warranty for any component not manufactured by H&S including, but not limited to, engines, batteries, tires, rims, hydraulic motors, pumps, etc. are covered by the warranty, if any, provided separately by their respective manufacturers. This warranty in all its parts, is extended solely to the original purchaser of the product, is terminated upon any subsequent transfer or sale from or by the original purchaser and extends no third party benefits or rights whatsoever. The warranty term for any product used in any commercial, custom, for hire or rental application, is limited to six (6) months from the date of delivery of the product to the original purchaser by an authorized H&S dealer. Polybonded (polyethylene and plywood) panels utilized in H&S Manure Spreaders are warrantied, to the original purchaser, to not wear through and the polyethylene overlay to not tear free of the plywood for the functional life of the spreader. This specific warranty on polybonded panels includes only replacement of any defective panel part without any allowance for labor beyond the terms of the general warranty (12 or 6 months), and is further limited to manure spreaders used to spread normal agricultural manure. This warranty does not include: (1) Any product that has been altered or modified in ways not approved by H&S; (2) Depreciation or damage caused by normal wear, misuse, improper or insufficient maintenance, improper operation, accident or failure to follow the product Operator’s Manual recommendations and product decal recommendations; (3) Normal maintenance parts and service; (4) Repairs made with parts other than those available from H&S or performed by anyone other than H&S or a dealer authorized by H&S to sell and/or service the product involved. To secure warranty service the purchaser must report the product defect to a dealer authorized by H&S to sell and/or service the product involved within the applicable warranty term together with evidence of the warranty start date and make the product available to that dealer within a reasonable period of time. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE OF THIS WARRANTY. H&S and the companies affiliated with it makes no warranties, representations, or promises, express or implied, as to the performance or freedom from defect of its products other than those set forth above and NO IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS OR FITNESS FOR A PARTICULAR PURPOSE IS MADE. IN NO EVENT WILL THE DEALER, H&S OR ANY COMPANY AFFILIATED WITH H&S BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. The ONLY REMEDY the purchaser has in connection with the breach of performance of any warranty on H&S products are those set forth above. The selling dealer has no authority to make any representation or promise on behalf of H&S, or to modify the terms or limitations of this warranty in any way. 2/04 WARRANTY REGISTRATION Date of Purchase Purchaser FILL OUT AND MAIL IMMEDIATELY TO MAKE WARRANTY EFFECTIVE Address City State Zip Product Model# Serial# Dealer City -1- Address State Signature of Original Buyer Zip IMPORTANT! Tear on dotted line, provide the information requested on the card. The H&S Warranty is valid “only” after this card is received and recorded at H&S Mfg. Co. Mail at once. No postage is required in the U.S.A. -2- H&S DEALER PRE-DELIVERY CHECK LIST AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS After the rake has been completely set-up, check to be certain it is in correct operating order before delivering to the customer. The following is a list of points to inspect. Check off each item as you have made the proper adjustments and found the item operating satisfactorily. ! ! (Remove Dealers File Copy At Perforation) ! ! ! ! ! ! ! ! Rake was not damaged in shipment. Check for dents and loose or missing parts. Report damage immediately to H&S Manufacturing Co., Inc. Rake has been correctly assembled according to instructions in this manual. Wheel nuts and all other fasteners are tightly secured. All bolts and fasteners are tight. All grease fittings have been lubricated. See Lubrication Chapter of this manual for details. Hoses and fittings are properly attached and there are no visible leaks. All mechanisms are operating trouble free. Rake wheels touch ground in unison when lowered into position. (Rake setting level) Wheels are properly mounted. Tires are inflated to correct pressure. Decals are in place and legible. Model Number Serial Number Dealer’s Name Inspection Date Signature of Pre-Delivery Inspector -3- Intentionally Left Blank -4- DEALER DELIVERY CHECK LIST AFTER COMPLETION, DEALER SHOULD REMOVE AND RETAIN FOR RECORDS This check list that follows is an important reminder of valuable information that should be passed on to the customer at the time this Rake is delivered. Check off each item as you explain it to the customer. This delivery check list, when properly filled out and signed assures the customer that the Pre-delivery service was satisfactorily performed. ! ! ! (Remove Dealer File Copy At Perforation) ! ! Explain to the customer that the pre-delivery inspection was made. Explain to the customer all the safety precautions they must excercise when operating this unit. Explain raking and windrow width adjustments. Explain to customer that regular lubrication is required for proper operation and long life of machine. Show customer the lubrication section of Owner’s Manual. ! Give the customer Owner’s Manual and make sure they read and understand all operating and service instructions. ! Record Serial Number on page 25 of this Manual. ! Have the customer sign a completed “Warranty Registration”, and mail it. Date Delivered Dealer’s Name By Signature of Original Buyer Note: Warranty is not valid until warranty card is completed and returned to H & S Mfg. Co., Inc. -5- Intentionally Left Blank -6- SAFETY INFORMATION BE ALERT! YOUR SAFETY IS INVOLVED. THIS SYMBOL IS USED THROUGHOUT THIS BOOK WHENEVER YOUR PERSONAL SAFETY IS INVOLVED. TAKE TIME TO BE CAREFUL. REMEMBER: THE CAREFUL OPERATOR IS THE BEST OPERATOR. MOST ACCIDENTS ARE CAUSED BY HUMAN ERROR. CERTAIN PRECAUTIONS MUST BE OBSERVED TO PREVENT THE POSSIBILITY OF INJURY OR DAMAGE. TRACTORS This operator’s manual uses the term “Tractor” when identifying the power source. H & S MANUFACTURING CO., INC. -7- SAFETY INFORMATION RECOGNIZE SAFETY INFORMATION This is the safety-alert symbol. When you see this symbol on your machine or in this manual, be alert to the potential for personal injury. Follow recommended precautions and safe operating practices. UNDERSTAND SIGNAL WORDS A signal word- DANGER, WARNING, or CAUTION - is used with the safety-alert symbol. DANGER identifies the most serious hazards. Safety signs with signal word DANGER or WARNING are typically near specific hazards. General precautions are listed on CAUTION safety signs. FOLLOW SAFETY INSTRUCTIONS Carefully read all safety messages in this manual, and all safety signs on your machine. Follow all recommended precautions and safe operating procedures. Keep signs in good condition. Immediately replace any missing or damaged signs. OBSERVE MAXIMUM TRANSPORT SPEED The maximum transport speed for this implement is 32 km/h (20 m.p.h.). Some tractors are capable of operating at speeds that exceed the maximum transport speed of this implement. Regardless of the maximum speed capability of the tractor being used to tow this implement, do not exceed the implement’s maximum transport speed. Exceeding the implements maximum transport speed can result in: * Loss of control of the tractor/implement combination * Reduced or no ability to stop during braking * Implement tire failure * Damage to the implement structure or its components Use additional caution and reduce speed when towing under adverse surface conditions, when turning, and when on inclines. Do not attempt transport if the fully loaded implement weighs more than 1.5 times the weight of the tractor. -8- SAFETY INFORMATION -9- TRACTORS This operators manual uses the term “Tractor” when identifying the power source. WARNING TO PREVENT SERIOUS INJURY OR DEATH BEFORE YOU ATTEMPT TO OPERATE THIS EQUIPMENT, READ AND STUDY THE FOLLOWING INFORMATION. IN ADDITION, MAKE SURE THAT EVERY INDIVIDUAL WHO OPERATES OR WORKS WITH THIS EQUIPMENT, WHETHER FAMILY MEMBER OR EMPLOYEE, IS FAMILIAR WITH THESE SAFETY PRECAUTIONS. DO NOT ALLOW PERSONNEL OTHER THAN THE QUALIFIED OPERATOR NEAR THE MACHINE. Stop the tractor engine, remove ignition key, and allow all mechanisms to stop before cleaning, working, or adjusting on machine. IF RAKE ARMS ARE IN THE RAISED POSITION, MAKE SURE THE HYDRAULIC TRANSPORT LOCK VALVES TO LOCK THE RAKE ARMS ARE IN THE CLOSED POSITION BEFORE CLEANING, WORKING ON, OR ADJUSTING MACHINE. DO NOT attempt to perform maintenance or repair with tractor running. DO NOT step up on machine at any time. DO NOT allow minors to operate or be near the machine. Stay clear of rake when raising or lowering main rake beams. Stay clear of hydraulic lines, they may be under extreme pressure or heat. For transport and storage, always make sure that the transport lock valves are in the closed position. H&S Manufacturing always takes the operator and his safety into consideration and guards exposed moving parts for their protection. However, some areas cannot be guarded or shielded in order to assure proper operation. In addition, the operators manual and decals on the machine itself warn you of further danger and should be read and observed closely. Study The Above Safety Rules ATTENTION - BE ALERT - YOUR SAFETY IS INVOLVED -10- -11- SET-UP & ASSEMBLY NOTE: Determine right or left side of the wheel rake by viewing it from the rear. If instructions or parts lists call for hardened bolts, refer to bolt torque chart. 1. Assemble the rake or check the rake for proper assembly and adjustment. Make sure that all bolts are tightened. 2. Attach the wheels with tires, using the lug nuts furnished and torque the mounting hardware to 95 ft./lbs. of torque. Check wheel bolts periodically thereafter. 3. Check tires and inflate to the recommended pressure. (ST205/75R15 - 50 PSI) 4. Lubricate the rake completely (See Lubrication Chapter in This Manual). 5. Tooth bolts must be torqued to 40 ft./lbs. to help prevent excessive tooth breakage. Re-torque rake tooth bolts after the first 100 acres. Check periodically thereafter. -12- PREPARING FOR OPERATION ADJUSTMENTS There are 5 sets of holes on the adjustable hitch. In addition, the hitch can also be flipped upside down to obtain 5 more positions, for a total of 10 positions to adjust for levelness. The hitch should be adjusted so the main rake beams are level, or parallel to the ground when in the raking position. 1. Adjust the tractor hitch (13 to 17 inches above ground) and attach rake to tractor with a hitch pin that has a safety locking device. 2. Remove weight from lift jack. Place jack in the storage position. 3. Connect the 2 hydraulic hoses for raising and lowering rake arms to the tractor. Open the 2 hydraulic transport lock valves and operate the tractor valve to fill the hydraulic lines and operate the cylinders. Add hydraulic fluid to the tractor system, as required. After the rake arms have returned to the transport position, close the transport lock valves before transporting. 4. Retighten all bolts on rake after 100 acres as bolts can loosen up on new machinery. 5. Re-torque rake tooth bolts after first 100 acres. Check periodically thereafter. -13- TRANSPORTING TRANSPORT LOCKS There are two hydraulic transport lock valves on the rake that must be turned to the closed position during transport in case of tractor valve leakage, or hose breakage. TOWING ON HIGHWAY Follow state and local regulations when towing farm equipment on public highways. Never tow the rake on a public highway at a speed greater than 20 m.p.h. (32 kph). REFLECTORS Front amber & rear red reflective decals on the outer edges of the rake for safety. -14- OPERATION & ADJUSTMENTS EMERGENCY SHUTDOWN Stop the tractor engine, remove ignition key, and allow all mechanisms to stop before cleaning or working on the machine. TRANSPORT LOCKS Before the rake arms can be hydraulically lowered for raking, the two hydraulic transport lock valves on the rake that must be turned to the open position. RAKING WIDTH ADJUSTMENT The AR08 rake has six width adjustments on each rake beam. The AR10 and AR12 have ten width adjustments on each rake beam. Each rake beam angle can be adjusted independently for multiple raking conditions. The front hole is typically used as a transport position. AR10/AR12 WINDROW WIDTH ADJUSTMENT Remove the jack from jack storage position. Position jack mount tube on top of rake beam pin with jack foot in position as shown. Remove the pin and clip from the rake arm. Windrow width can now be adjusted on each side of the rake. The AR10 and AR12 have two adjustments. After the desired windrow width has been reached, re-insert pin in desired hole, remove jack and return to the storage position. -15- OPERATION & ADJUSTMENTS HYDRAULIC SYSTEM The ACTION Rake utilizes a 2 hose hook-up with a Master/Slave cylinder system. When the rake arms are lowered, the axles rotate forward, raising the main frame for more clearance. When the rake arms are raised, the axles rotate rearward, lowering the main frame for transport. This system is incorporated with the raising and lowering of the rake arms. Cylinder Raking Position Cylinder Transport Position FLOATATION Rake Arm Floatation pressure of the rake arms can be adjusted by adjusting the stop on the top of the spring located at each end of the main frame. The stop should be adjusted so there is approximately 1/4” of threads showing above the jam nut. The rake can be adjusted for lighter floatation by “raising” the stop. -16- OPERATION & ADJUSTMENTS FLEXIBILITY Rake Arm The rake has been designed that when the rake is lower on level ground, the pins of the cylinder are centered in the bracket of the rake. This allows the rake beams to flex up and down without the hydraulic cylinder restricting it’s motion. The rake arms are also on a pivot to allow oscillation for additional floatation. Rake Beam The rake beam is allowed to oscillate through the main arm pin for added flotation. Rake Wheel Rake wheel oscillation is achieved through the wheel arm mount pin with the slotted style hole. ONE SIDED RAKING Raking with one side can be accomplished by closing either of the transport lock valves when the rake is in the transport position. When the tractor remote hydraulic valve is operated, only the rake arm with the hydraulic transport lock valve in the open position will lower into the raking position. The rake arm with the hydraulic transport lock valve in the closed position will stay in the transport position. -17- OPTIONS CENTER KICKER WHEEL An optional center kicker wheel is available for the AR10 & AR12 rakes. If the hay is laying out flat, the extra wheel allows you to raise the hay laying in the center of the rake out of the stubble for easier pick-up. The center kicker wheel will raise and lower when the hydraulics are activated. -18- LUBRICATION Become familiar with all lubrication points and establish a routine to ensure complete lubrication of the rake. GENERAL INFORMATION IMPORTANT: Catch and dispose of fluid per local waste disposal regulations whenever service is performed on hydraulic components, valves, cylinders, hoses, etc. WHEEL BEARING LUBRICATION, CLEAN & RE-PACK INSTRUCTIONS Grease wheel bearings as needed depending on amount of travel. Annually disassemble and clean parts in a solvent. Pack bearings with a high grade grease. Reassemble, and tighten nut until a slight drag is felt when wheel is turned. Back nut off and insert cotter pin into first hole that you see as you back the nut off, bend cotter pin over and re-install cap. GREASE FITTINGS There are 16 grease fittings on the AR08, 20 on the AR10/AR12 model rakes, and 1 on the Center Kicker Wheel. If lubricated properly and often enough, it will prolong the life of your rake. Grease daily during normal use and before and after storage and after power washing. Use a good grade of high quality grease. Make sure that grease comes out around the shaft on sleeve type bearings. Wipe off excessive grease to prevent accumulation of chaff or grit around the bearing. Replace any missing or plugged grease fittings. LOCATION Listed and shown are the description of location and number of grease fittings. Zerk Center kicker wheel arm (If Equipped) -19- LUBRICATION Rake Beam - One on each pivot & double rake wheel arm One on each ACTION pivot (bottom) One on each vertical pivot point, rake arm mount Four on each lift arm (top & bottom) One on each lift arm pivot point -20- DECAL PLACEMENT Your H&S Rake was manufactured with operator safety in mind. Located on the rake are various decals to aid in operation, and warn of caution areas. Pay close attention to all decals. DO NOT REMOVE ANY OF THESE DECALS. IF DECALS ARE LOST, DAMAGED, OR IF CARTED WHEEL RAKE IS REPAINTED, REPLACE DECALS. REMEMBER: DECALS ARE FOR YOUR PROTECTION AND INFORMATION. Listed below are the decals on your Rake. Part # Quantity 1906C 2 2700A 2 2700B 2 11599 1 72203A 1 82602 2 71188B 1 DC31811 2 B6DC 2 8496 1 8497 1 8501 1 8505 1 8495 1 8494 1 311 1 DCAMB1 2 DCRED 2 Description Stay Clear Stay Clear of Rake Stay Clear of Rake Do not go near leaks Help avoid injury - Read and understand the operators manual Crushing Hazard Jack Storage Position Close Hydraulic Locking Valve H&S Decal H&S Decal 3 x 6 AR8 Decal AR10 Decal AR12 Decal Action Rake Decal - Right Action Rake Decal - Left Patent Decal Amber Reflector Red Reflector -21- DECAL PLACEMENT B6DC DCAMB1 2700A 1906C DC31811 Action Rake-(right) 8495 11599 72203A 311 DC31811 Action Rake-(left) 8494 1906C 2700A B6DC DCAMB1 *OLD PICTURES - TIRES ON WRONG SIDE OF SPINDLES* 2700B 1 Decal on the arm of each side -22- DECAL PLACEMENT DCRED 8496 Model # AR8 -8497 AR10 - 8501 AR12 - 8505 DCRED 71188B 82602 -23- TROUBLESHOOTING NOTE:This Troubleshooting Chapter presents problems, causes and suggested remedies beyond the extent of loose, worn or missing parts and it was developed with the understanding that the machine is in otherwise good operating condition. WARNING: MAKE SURE THAT THE TRACTOR IS SHUT OFF AND THE RAKE CAN NOT MOVE BEFORE SERVICING THE RAKE. MAINTENANCE AND REPAIR SERVICE WORK TO BE PERFORMED BY A QUALIFIED SERVICE PERSON ONLY. PROBLEM Rake Lifting Arms Will Not Lower Rake Lifting Arms Will Not Raise CAUSE REMEDY Hydraulic Transport Lock Valve Is In Closed Position Rotate Transport Lock Valve To Open Position Hydraulic Coupler Hoses Not Coupled To Tractor Properly Couple Hoses To Tractor Hydraulic Coupler Not Coupled To Tractor Properly Couple Hose To Tractor Tractor Hydraulics Do Not Have Sufficient Pressure Tractor Should Have At Least 1500 PSI To Operate Rake Hydraulic Transport Lock Valve Is In Closed Position Rotate Transport Lock Valve To Open Position -24- INSTRUCTIONS FOR ORDERING PARTS All service parts should be ordered through your authorized H&S dealer. They will be able to give you faster service if you will provide them with the following 1. Model & Serial number is located on the left front of the main frame of your unit. 2. All reference to left or right apply to the machine as viewed from the rear. 3. Parts should not be ordered from illustration only. Please order by complete part number. 4. If your dealer has to order parts - give shipping instructions: VIA truck - large pieces (please specify local truck lines) VIA United Parcel Service (include full address) PLEASE RECORD NUMBERS FOR YOUR UNIT FOR QUICK REFERENCE ABOUT IMPROVEMENTS H&S IS CONTINUALLY STRIVING TO IMPROVE IT’S PRODUCTS We must therefore, reserve the right to make improvements or changes whenever it becomes practical to do so without incurring any obligation to make changes or additions to the equipment previously sold. -25- FIGURE 1 FRAME COMPONENTS -26- FIGURE 1 FRAME COMPONENTS ITEM 1 8 WHEEL 10WR7 10 WHEEL “ 12 WHEEL “ 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 * 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 8ERWE01 10ERWE06 YBHH24018 YWLO24005 YNHX24006 G89 YBHH08100 YNRL08005 YWFL08005 CAT18 CAT199 10ERWE07 CAT5 CAT6 CAT10 CAT14 CAT8 CAT7 CAT9 CAT128A YPCT05015 YNSL24010 YWFL24005 10WR49 10WR47 YBHH24042 YNJM24010 YWFL24005 YBHH24014 YBHH10085 YNTL10005 S522 10ERWE01 CAT46 YBHH16055 10ERWE08 YWLO16005 YNHX16005 BFR753A 10ERWE05 10ERWE02 “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ 0240WE05 “ 12ERWE11 “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ 12WR1 “ “ “ “ “ “ “ 12ERWE12 “ “ “ “ “ “ “ “ NOTE: “ MEANS SAME AS PREVIOUS MODEL - MEANS NOT USED ON THIS MODEL -27- DESCRIPTION RAKE ARM PIN (TWO OF THESE REQUIRED ON 8 WHEEL RAKE) FRAME WELDMENT 10ER CLEVIS BOLT 3/4"-10 X 2 GR 8 YELLOW ZINC WASHER, LOCK, 3/4" HEX NUT 3/4"-10 GR. 8 .250 x 28 STRAIGHT GREASE ZERK BOLT, 1/4" X 3/4" GR. 5 HEX NUT, REVERSIBLE-SIDE LOCK, 1/2"-20 FLAT WASHER WHEEL 15X5 ASM 225-75 R15 AXLE WELDMENT 60 IN WHEEL SEAL INNER CONE OUTER CONE WHEEL NUT 1/2"-20 HUB WITH RACES INNER BEARING RACE OUTER BEARING RACE STUD BOLT 1/2"-20 UNF X 1-7/8" GR 5 COTTER PIN, 5/32" X 1-1/4" HEX NUT, SLOTTED, 3/4"-16 WASHER, FLAT, 3/4" USS COMPLETE HUB RAKE ARM SPRING 3/4"-10 X 2-3/4" GR. 5 FULL THREAD HEX NUT, JAM, 3/4"-10 FLAT WASHER BOLT, 3/4"-10 X 1-3/4" GR. 5 5/16"-18 x 2-1/2" GR. 5 NUT, 5/16" TOP LOCK MANUAL HOLDER POLE HUB CAP BOLT, 1/2" X 1-3/4" GR 5 AXLE WELDMENT LH 60 IN WHEEL WASHER, LOCK, 1/2" HEX NUT, 1/2" JACK 2000# SIDE WIND PIVOT ARM PIN SPRING HOLDER FIGURE 2 RAKE BEAMS AND WHEELS -28- FIGURE 2 RAKE BEAMS AND WHEELS ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 8 WHEEL 10WR8 10ERAS20 8ERWE06 YBHH10110 YWLO10005 YNHX10005 10ERAS08 YWLO76015 YNHX76015 YBHH76015 T178 FR73 T179 FR72 YBCR76005 T172 1088 T170 T164 T163 T173 1086 T165 T171 8ERWE05 G89 1075 8ERWE04 FR70 12ERWE04 12ERWE08 FR69 10 WHEEL “ “ 10ERWE13 “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ 10ERWE09 “ “ 10ERWE03 “ “ 10ERWE11 10ERWE12 “ “ 12 WHEEL “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ 12ERWE10 “ “ 12ERWE09 “ “ “ “ NOTE: “ MEANS SAME AS PREVIOUS MODEL - MEANS NOT USED ON THIS MODEL -29- DESCRIPTION PIVOT THRUST WASHER WIDTH LINK PIN ASSEMBLY BEAM ANGLE LINK BOLT, 5/16 X 3-1/2 GR 5 WASHER, LOCK, 5/16 HEX NUT CANE PIN ASSEMBLY WASHER, LOCK, M10 HEX NUT, M10-1.5 BOLT, M10-1.5 (25MM) TOOTH CLIP 60 IN WHEEL TOOTH RAKE WHEEL DISH 60 IN WHEEL BAND CARR. BOLT, 10MM X 25MM (T168) 1.5 X 18MM CASTLE NUT RETAINING CLIP (REPLACES T169) OUTER CONE INNER CONE SEALING WASHER HUB CAP ITALIAN RAKE WHEEL HUB INNER RACE OUTER RACE LEFT RAKE BEAM .250 x 28 STRAIGHT GREASE ZERK TUBING CAP 3 X 3 SQ. RIGHT RAKE BEAM 60" RAKE WHEEL RH LEFT CANE WELDMENT CENTER CANE WELDMENT RH CENTER CANE WELDMENT LH RIGHT CANE WELDMENT 60" RAKE WHEEL LH FIGURE 3 LIFT ARMS AND HYDRAULICS -30- FIGURE 3 LIFT ARMS AND HYDRAULICS ITEM 1 2 3 4 5 6 7 8 9 10 11 * * 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 8 WHEEL LW55 16SV136 YPCT06020 10ERMS02 10ERMS07 10ERMS03 10ERMS08 8005 8ERWE08 8ERWE07 10WR6 12ERWE06 12ERWE05 10ERAS01 YBHH10085 YNTL10005 16SV338 CHM202 16SV351 1023 CHM164 CHM207 RG21 G89 BFR33 CHM277 YBHH10010 DWM205 10ERMS04 1059 1076 23N111A 10WR7 CHM278 8735 10 WHEEL “ “ “ “ “ “ “ “ 10ERWE04 12ERWE07 10WR34 “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ 12 WHEEL “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ 12ERMS01 “ “ “ “ “ “ NOTE: “ MEANS SAME AS PREVIOUS MODEL - MEANS NOT USED ON THIS MODEL * MEANS NOT SHOWN -31- DESCRIPTION CYLINDER PIN, LONG SPEED CONTROL WASHER COTTER PIN 3/16" X 2" HOSE, 90 DEG ENDS HOSE, 90 DEG ENDS HOSE, STRT ENDS HOSE, 90 DEGREE ENDS 06 BULKHEAD TEE FITTING LEFT SLIDER HOUSING WELDMENT RIGHT SQUARE SLIDER HOUSING SLIDE ARM MAIN BEAM ARM LH MAIN BEAM ARM RH RAKE BEAM PIN 12ER RIGHT INTERMEDIATE LINKAGE 12ER LEFT INTERMEDIATE LINKAGE ARM SLIDER PIN ASSEMBLY 5/16"-18 x 2-1/2" GR. 5 NUT, 5/16" TOP LOCK 3/8" BALL VALVE 3/8" MALE NPT TO 06 MALE 90 ELBOW 3/8" NIPPLE 06-06 M/F ORIFICE, 0.047 MALE ELBOW CTX ~ 6-6 CTX 06 TO 3/4"-16 ORB STRT FITTING 1/4"-28 45° ZERK 1/4" x 28 STRAIGHT GREASE ZERK WASHER 3/8" COVER PLATE BOLT, 5/16" X 1" GR. 5 MALE QUICK COUPLER 1/2" HOSE, TRACTOR CYLINDER, ACTION REPHASE TEE, 1/2" ORB TO 3/8" JIC HYD. CYLINDER, 2" X 16" RAKE ARM PIN 3/8" DOUBLE HOSE CUSHIONS SEQUENCE VALVE FIGURE 4 OPTIONAL KICKER WHEELS -32- FIGURE 4 OPTIONAL KICKER WHEELS ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 8 WHEEL - 10 WHEEL 0240WE04 0240WE07 0240HF03 0240WE03 BFR36 10ERAS08 8579 0240TU04 YPEX10017 12X1818 BFR221 S99 G89 G16 BFR230 YNHX10005 YBTE10030 BFR110 YBCR16015 YNSF16005 YNNY10005 YWFL10005 YBHH16120 YWFL16005 YNRL16005 YBHH12010 YNRL12005 YBHH16030 YBHH16140 YBHH16010 T163 T164 T165 1086 T171 T170 T172 1088 T173 T177A T179 T178 YBCR76005 YNHX76015 10WR42 10WR17 12 WHEEL “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ “ DESCRIPTION KICKER MOUNT WELD KICKER STOP WELDMENT KICKER LEVER LINK FRAME PIVOT KICKER ARM WELD RAKE WHEEL SPINDLE CANE PIN ASSEMBLY POLY PIVOT BEARING KICKER PIVOT SPACER LOWER EXPANSION PIN, 5/16" X 2" WASHER POLY WASHER KICKER O RING 1/4" X 28 GREASE ZERK BRONZE BUSHING 1-1/2" OD X 1-1/4" ID X 1.5" BEARING SPACER HEX NUT, 5/16" TURNED EYE BOLT, 5/16" X 3" SPRING CARR. BOLT, 1/2" X 1-1/4" GR. 5 HEX NUT, SERRATED FLANGE, 1/2-13" HEX NUT, NYLON LOCKNUT, 5/16"-18 WASHER, FLAT, 5/16" USS BOLT, 1/2" X 3-1/4" GR. 5 WASHER, FLAT, 1/2" USS HEX NUT, REVERSIBLE-SIDE LOCK, 1/2"-13 BOLT, 3/8" X 1" GR. 5 HEX NUT, REVERSIBLE-SIDE LOCK, 3/8"-16 BOLT, 1/2" X 1-1/2" GR. 5 BOLT, 1/2" X 4-1/2" GR. 5 BOLT, 1/2" X 1" GR. 5 SEALING WASHER INNER CONE INNER RACE ITALIAN RAKE WHEEL HUB OUTER RACE OUTER CONE 1-1/2" X 18MM CASTLE NUT RETAINING CLIP HUB CAP RAKE WHEEL BAND RAKE WHEEL DISH TOOTH CLIP CARR. BOLT, 10MM X 25MM HEX NUT, M10-1.5 RAKE WHEEL TOOTH LH RAKE WHEEL COMPLETE NOTE: “ MEANS SAME AS PREVIOUS MODEL - MEANS NOT USED ON THIS MODEL -33- FIGURE 5 HYDRAULIC CYLINDER ITEM 1 2 3 4 5 6 7 8 9 10 11 8 WHEEL T181A T182A T183 23N145A 10WR45 23N147 23N148 23N149 23N150A T187 10WR11A 10 WHEEL “ “ “ “ “ “ “ “ “ “ “ 12 WHEEL “ “ “ “ “ “ “ “ “ “ “ -34- DESCRIPTION CLEVIS CAP ROD CAP PISTON ROD CYLINDER TUBE TIE ROD PISTON NUT PLUG ROD CLEVIS SEAL KIT COMPLETE HYDRAULIC CYLINDER PARTS NOTES -35- PARTS NOTES _____________________________________________________________________ _______________________________________ _________________________________________ ___________________________________________ __________________________________________ _____________________________________________ __________________________________________ __________________________________________ _______________________________________ ___________________________________________ _____________________________________________ ____________________________________________ __________________________________________ __________________________________________ _________________________________________ __________________________________________ __________________________________________ ____________________________________________ _____________________________________________ ___________________________________________ ___________________________________________ __________________________________________ _____________________________________________ -36- H&S MFG. CO. products approved for the FEMA SEAL OF QUALITY
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.3 Linearized : Yes Encryption : Standard V1.2 (40-bit) User Access : Print, Modify, Copy, Annotate, Fill forms, Extract, Assemble, Print high-res Author : rzygarlicke Create Date : 2012:05:18 21:06:34Z Modify Date : 2013:06:05 13:15:52-07:00 Subject : Rake AR8-AR10-AR12 XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Producer : Acrobat Distiller 5.0.5 (Windows) Keywords : Metadata Date : 2013:06:05 13:15:52-07:00 Creator Tool : Adobe PageMaker 7.0 Format : application/pdf Creator : rzygarlicke Title : Rake AR8-AR10-AR12 Description : Rake AR8-AR10-AR12 Document ID : uuid:fcfdcfeb-77f7-4dfa-b255-673fca4c1c96 Instance ID : uuid:261c44ac-10b9-463a-8a9d-ae7f7d3ee712 Page Count : 40EXIF Metadata provided by EXIF.tools