SA32 User Manual

SA32_user_manual

User Manual:

Open the PDF directly: View PDF PDF.
Page Count: 6

DownloadSA32 User Manual
Open PDF In BrowserView PDF
Security at Fingertips

User Manual
Single Door RFID Based Access Control
SA32-E

www.esslsecurity.com

Product Overview

SA32-E

Single Door RFID Based Access Control
SA32-E is an Access Control Standalone Device with contact-less
smart card and password verifications, which enables 3 verification modes
(Card only, PIN only, and Card & PIN) to ensure maximum safety and
flexibility. With 1 Relay output (optional) and 1 PUSH (low) output,
1 door button Port and 1 doorbell Port, SA32 is simple but effective to use,
its convenience and adaptability allow it to be well deployed in residential
housing, offices and any other public facilities.

1. Specifications:
1.1Technical parameters:
NO

Item

1
2
3
4
5
6
7
8
9

Value

Operating voltage

DC 12V±10%

Operating current

< 100mA

Dimensions

120mm×78mm×22mm

Weight

110g

Ambient temperature

0 —60

Relative humidity

20%—80%

Storage

1000users

Card type (alternative)

EM(ID) card(IC card for options)

Card reading distance

1－15CM

1.2 Factory Default:
Programming

Common Access

123456

Password

Password

Backlight

Auto (for options)

W26 port

Input (for options)

Relay

Unlock

None
5 Seconds

output

OFF

Security mode

Card or Access Password
Access Password include Private Access Password (PIN) and

Open mode

Common Access Password

1.3 Light and Sound indicates:
Light:

red and green
Light

Description

Access control status

Red light flash every 1 sec （Slow flash）

Holding state

Red light is always ON

Programming state

Green light is always ON within Open time

Unlocking state

Green light flash every 0.5sec (Fast flash)

Pending further action

Sound ：buzz
Description

I ndicates

1 short buzz

Valid input

3 short buzz

Invalid input

1 long buzz

Program success

Continuous long buzz

Restoring factory programming passwords

2. Installations Guide
JP1 terminal:
NO
1
2
3
4
5
6

Mark
+12V
GND
PUSH
OPEN
BELL
BELL

Color
Red
Black
BLUE
Yellow
Grey
White

Function
Power+
PowerLow level output
Door Release
BELL
BELL

JP2 terminal:
NO
1
2
3
4
5
6
7

Mark
+12V
GND
DATA0
DATA1
NC
COM
NO

Color
Red
Black
Green
White
Brown
Blue
Purple

Function
Power+
PowerWG DATA0
WG DATA1
Relay NC output
Relay Com output
Relay NO output

Remark

For options

Wiring diagram:

Remark:
If let relay drive electric - lock, please connect a reverse diode with the lock’s “+” and
“-” poles.

3. Programming Guide

3.2 To reset to Factory Programming Password (123456)
Step1、Turn off power and connect bin 2&3 of RST(S1)。
Step2、Turn on power and buzzer gives 3 long buzz with green light flash fast。
If need to set Manager Card, now read two empty cards first one as Manager Add Card and
Second one as Manager Delete Card with red light flashing and continuous short buzz .
Step3、Turn off power, disconnect bin2&3 and connect bin 1&2 of RST。
Step4、Turn on power again.

3.3 How to use Manager Card - MAC & MDC
To add a card user in standby mode:

read MAC

read new cards

To delete a card user in standby mode: read MDC
To delete all users in standby mode:

read MDC

read MAC

read registered cards
read MAC

read MDC

read MDC

Remark: User cards can be added or deleted continuously.
3.4 User ID No. explain
User ID is auto-generating 4-digit number started at 0001. The number increases with adding
user one by one and ignores deleting user. Common Access Password has no ID.

3.5 How to change PIN (When open mode: card+ PIN)
After reading card and input corresponding PIN to open the door, within 5 seconds, long press
until the green

lights flash fast. and then input

changed successfully with a long buzz.

new PIN

#

new PIN

#

# , new PIN

#24,Shambavi Building, 23rd Main, Marenahalli,
JP Nagar 2nd Phase, Bangalore - 560078
Phone: 91-8026090500 | Email : sales@esslindia.com
www.esslsecurity.com
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 6
XMP Toolkit                     : Image::ExifTool 10.40
About                           : uuid:feec56c1-d640-11f2-0000-04b847e000d6
Creator                         : Cash
Format                          : application/pdf
Title                           : SA32 user manual
Author                          : AmpleTrails
Producer                        : GPL Ghostscript 9.20
Create Date                     : 2017:09:20 18:55:03+02:00
Creator Tool                    : Adobe Illustrator CS6 (Windows)
Modify Date                     : 2017:09:20 18:55:03+02:00
Document ID                     : uuid:feec56c1-d640-11f2-0000-04b847e000d6
EXIF Metadata provided by EXIF.tools

Navigation menu