10021_SBCC District Standard Specification Sectionsx VR910 SBCC Sections 2014 05 22
User Manual: VR910
Open the PDF directly: View PDF 
.
Page Count: 19
| Download | |
| Open PDF In Browser | View PDF |
SBCC DECLARED DISTRICT STANDARDS 05/22/2014 SANTA BARBARA CITY COLLEGE DECLARED DISTRICT STANDARDS The following lists of items are the Declared District Standards and have been reviewed by the Board of Trustees and are declared as District Standard Materials. Items declared as District Standards shall be used without exception and no substitutions shall be allowed. SECTION 075000 Manufacturer: MEMBRANE ROOFING Tremco New Roofs: Warranty: Rating: Testing: Inspections: Restored Roofs: Prior Testing: Warranty: Ten year Quality Assurance Plus “Full System” type with options to extend 15 or 20 year warranty. UL Class “A” for entire system. FM 4470 for wind uplift to 74 mph min, fire and hail. Manufacturer inspections and preventative maintenance as follows: Year 2 and 5 for 10-year QA Plus Warranty. Year 2, 5 and 10 for 15-year QA Plus Warranty. Year 2, 5, 10 and 15 for 20-year QA Plus Warranty. Infrared and/or electrical capacitance scanning pinpointing any damaged or wet insulation areas. Membrane core testing limited to tensile strength, bitumen softening point, amount of interply and flood coat of bitumen, and asbestos testing. Ten Year Quality Assurance Plus with same coverage as new roof systems. Mfr Requirements: Inspections performed by full-time, trained employees of manufacturer Field inspections during roofing with daily reports issued to SBCC Final acceptance inspection report issued to SBCC Have mfr representative available at all times during roofing operation Provide technical and architectural assistance during warranty term Provide names & addresses of manufacturer certified roofing contractors Contact: Jim Gilday SECTION 081113 Doors, General HOLLOW METAL DOORS & FRAMES 1” cell kraft honeycomb core Full height, epoxy-filled mechanical interlock edges 14 gage inverted top and bottom channels 1-3/4” door thickness Usage Frequency: Extra Heavy Duty Interior Doors: Cold rolled steel Exterior Doors: Hot-dip galvannealed steel (A60) or galvanized steel (G90) Doors (Flush): Exterior Doors: Interior Doors: Doors (Stile & Rail): Minimum 5” wide vertical stiles and top rails with no visible seams Minimum 10” high bottom rail Exterior and Interior Doors: 16 gauge 800-524-2067 jgilday@tremcoinc.com 16 gauge 18 gauge Page 1 of 19 SBCC DECLARED DISTRICT STANDARDS 05/22/2014 SECTION 081113 Door Frames: HOLLOW METAL DOORS & FRAMES - continued Exterior: 14 gauge (hot-dip galvannealed or galvanized) Interior: 16 gauge SECTION 084113 Entrance Doors: ALUMINUM-FRAMED ENTRANCES AND STOREFRONTS Minimum 5-1/2” wide vertical stiles and top rails Minimum 10” high bottom rail Aluminum Finishes: High-Performance Organic Finish 3-Coat Fluoropolymer Finish Complying with AAMA 2605 70% PVDF Resin by Weight in Color Coat and Clear Topcoat SECTION 085000 Windows: WINDOWS District Standard is for aluminum windows. Other materials (fiberglass, wood, vinyl or steel) are not allowed. Aluminum Finishes: High-Performance Organic Finish 3-Coat Fluoropolymer Finish Complying with AAMA 2605 70% PVDF Resin by Weight in Color Coat and Clear Topcoat SECTION 087100 General Notes: DOOR HARDWARE Deviations must be approved by Director of Facilities & Campus Development Electric strikes shall include all assoc elec & conduits for functioning system Deviations in exterior door pulls must be approved by the Director of Security Deviations from electrified components must be approved by IT Department. Keying as directed by Director of Admin Services & Director of Security Work Includes: Mechanical door hardware for swinging and sliding doors. Cylinders for door hardware specified elsewhere. Electrified door hardware. Related Sections: Section 087113 “Automatic Door Operators” Section 281300 “Access Control” for access control devices installed at door openings and provided as part of a security system Hinges: Interior: Exterior: Continuous: Ives 3CB1 4.5x4.5 652 Dull Chrome Ives 3CB1 4.5x4.5 630 Stainless Steel NRP Ives 224HD AL at hollow metal & wood doors Ives 112HD AL at aluminum doors Continuous hinge height 1” less than door height Locksets: Office Lock: Entry Lock: Storeroom Lock: Classroom Lock: Privacy Lock: Passage Set: Schlage ND50 JD Rhodes 626 Schlage ND53 JD Rhodes 626 Schlage ND80 JD Rhodes 626 Schlage ND70 JD Rhodes 626 Schlage ND40S Rhodes 626 Schlage ND10S Rhodes 626 Cylinders: Primus High Security: Schlage 20-740 9G Keypad Locks: (Stand-Alone) Cylindrical: Mortise: Rim Panic: Schlage Electronics CO100 CY KP RHO 626 Schlage Electronics CO100 MS KP RHO 626 Schlage Electronics CO100 993R KP RHO 626 Page 2 of 19 SBCC DECLARED DISTRICT STANDARDS 05/22/2014 SECTION 087100 Remote Button: DOOR HARDWARE – continued Schlage Electronics PB660 Electric Strikes: Von Duprin 6211 FSE 24VAC Panic Devices: Exit Only: With Lever Trim: Surface Vertical Rod: Concealed Vert Rod: Electrified Panics: Door Cord: Schlage Electronics 788-12 Power Transfer: Von Duprin EPT-10 26D Locking Devices: Rim Cylinder: Mortise Cylinder: Deadbolt w/ Thumb: Padlocks: Door Pulls: Vandal-Resist Pulls: Ives VR910 NL 330 (pull with cylinder) Ives VR910 DT 630 (dummy pull) Standard Pulls: Ives 8303-0 4x16 630 Offset Pulls: Ives 8190-0-N 630 Lock Guard: Ives LG-1 630 Door Plates: Push Plates: Kickplates: Ives 8200 4x16 630 Ives 8400 Series 630, 10” high x 2” less than door width (1” less than door width at non-mullioned pairs) Door Closers: Interior Inswing: Interior Outswing: Exterior Outswing: Hold-Open Option: LCN 4040XP REG 689 LCN 4040XP RW/PA 689 LCN 4040XP EDA 689 Add “H” to part numbers listed above High Security Magnetic Lock: Single Door: Pair Doors: Schlage Electronics M490 Schlage Electronics M492 Hardware Mullions: Steel: Aluminum: Storage Kit: Stabilizer: Von Duprin 4954 x door height Von Duprin KR1654 x door height Von Duprin MT54 Von Duprin 154 Weatherstripping: Adjustable Type: Pemko 379 DSK head/jambs at exterior doors Pemko 379 DS head/jambs Pemko 290 DPK threshold stop Threshold: Von Duprin 99 EO Von Duprin 99L x 996 06 626 Von Duprin 9927 EO Von Duprin 9947 EO Add “EL” suffix to part numbers listed above Schlage 20-057 626 (for panic device) Schlage 30-137 626 Schlage B660JD 626 Schlage Door Stops: Interior (Wall): Exterior (Floor): Overhead Stops: Ives WS407CCV-630 (reinforce walls as required) Ives FS18L-BLK Glynn-Johnson 90 series and 100 series (Use only when floor or wall stops not advisable) Floor Closers: New Doors: Not allowed Retrofit Applications: Replace with continuous hinge and closer Contact: Marc Schwartz Allegion, PLC 909-610-2539 x2558 626-390-0605 cell Page 3 of 19 marc.schwartz@allegion.com SBCC DECLARED DISTRICT STANDARDS 05/22/2014 SECTION 087113 General Notes: AUTOMATIC DOOR OPERATORS Deviations must be approved by Director of Facilities & Campus Development Automatic door operators shall include all associated electrical & conduits for a functioning system Related Sections: Section 087100 “Door Hardware” Section 281300 “Access Control” for access control devices installed at door openings and provided as part of a security system Auto Operators: Push Side Mount: Pull Side Mount: Actuator: Wikk Industries 136-3SW TRAN 300M wireless Receiver: Wikk Industries 1-Channel Receiver Keyswitch: Schlage 653-04-L2 Power Supply: Single Door: Single w/ Panic: Pair w/ Panic: 2-Pair w/ Panic: Battery Backup: ADA Push Button: Battery or hardwire Contact: Marc Schwartz Allegion, PLC SECTION 095113 General: ACOUSTICAL PANEL CEILINGS Fire Resistance: Class A Light Reflectance: Not less than 0.82 Warranty (30 year): Resistant to visible sag, mold/mildew & bacterial growth Standard Panels: (NRC ≥ 0.55) Square Edge: (Standard) USG Radar ClimaPlus Panels #2410 Armstrong Fine Fissured Panels #1729 Scored Panels (Special Areas) USG Radar ClimaPlus Illusion Two/24 Panels #78780 Armstrong Fine Fissured Panels #1729 Square Edge: (Standard) USG Radar ClimaPlus Panels #2410 Armstrong Fine Fissured Panels #1729 Scored Panels: (Special Areas) USG Millenia ClimaPlus Illusion Two/24 Panels #78780 Armstrong Cirrus Second Look II Panels #513 (NRC=0.65) Sound Control: (NRC ≥ 0.70) LCN 9542 REG LCN 9531STD Schlage Electronics PS902 Schlage PS914 Schlage PS914-2RS Schlage PS914-4ARL Schlage Electronics 900 BBK 909-610-2539 x2558 626-390-0605 cell marc.schwartz@allegion.com Suspension System: USG Donn DX/DXL24 15/16” Exposed Grid Suspension SysteM Armstrong Prelude XL 15/16” Exposed Grid Suspension System SECTION 095123 General: ACOUSTICAL TILE CEILINGS Fire Resistance: Class A Light Reflectance: Not less than 0.82 Ceiling Tiles: (NRC ≥ 0.45) USG Radar ClimaPlus Tiles #2570 or Armstrong Fine Fissured Tiles #741 12” x 12” x 1/2” or 5/8” with tongue & groove edges for surface application Page 4 of 19 SBCC DECLARED DISTRICT STANDARDS SECTION 096516 Linoleum Flooring: 05/22/2014 RESILIENT SHEET FLOORING Forbo Flooring, Inc. (or approved equal) Marmoleum® Sheet Flooring. SECTION 096519 RESILIENT TILE FLOORING Rubberized material is preferred over linoleum but may not be feasible due to project budget Rubber Flooring: Nora Rubber Flooring; Freudenberg Building Systems, Inc. (or equal). Noraplan® 24” x 24” Rubber Tile Flooring SECTION 096813 Manufacturer: TILE CARPETING (CLIMATE NEUTRAL MODULAR CARPET TILE) Interface FLOR Product Style: Cubic 1380102500 Color: TBD Mfr Requirements: At least 15 years of production experience with similar modular carpet Registration to the ISO 9001/9002 Quality Management System. Demonstrate environmental responsibility through programs of source reduction, recycling, reuse and conservation and registration as a submittal to the ISO 14001 Environmental Management System Carpet Tiles: Tufted textured loop Orthogonally ambiguous non repeating pattern for random installation Gauge to be 1/12th Soil and stain protection to be Protekt²® Yarn system to be Type 6.6 or 6 from Aquafil, Universal, Solutia or Invista Fiber modification ratio equal to or less than 2.5 100% Solution Dyed with post-consumer recycled fiber 30% minimum post-consumer content 50% minimum total recycled content 24 oz/sq yd maximum tufted yarn weight 6000 pile density 50 cm x 50 cm size Standard backing to be GlasBac® RE Tile Mill extruded nylon not acceptable Tile Performance: Modular carpet tile shall meet the following performance standards: Pill Test Passes Radiant Panel Test ≥ 0.45 watts/cm2, Class 1 Smoke Density: ≤ 450 flaming mode Dimensional Stability: ≤0.1% change Static Generation at 70°F: ≤ 2.5 kV at 20% R.H Lightfastness: 4.0 after 60 hours Crocking: 4.0 wet, dry Cold Water Bleed: 4 Gas Fade: 4 Ozone Fade: 4 Antimicrobial >95.0% reduction Fungicidal: No growth Soil/Stain Protection: >8.0 on Red 40 Stain Scale California 01350: Passes Page 5 of 19 SBCC DECLARED DISTRICT STANDARDS SECTION 096813 Installation: 05/22/2014 TILE CARPETING – continued Tactile installation method preferred with no adhesive to be applied to sub-floor for installation Green Requirements: Green Label Plus Certified #GLP0820 Sustainable Carpet Assessment Standard: (NSF-140) Sustainable Choice Platinum All existing carpet and existing carpet waste be reused or recycled in an “environmentally friendly” manner. Warranty For: Surface fiber wear shall not be more than 10% by weight (no chair pads) (15 Years Minimum) Static generation at less than 3.0 kV at 70º F, and 20% R.H No delamination, edge ravel or dimensional instability (i.e., shrinkage, curling and doming) which adversely affect the ability of the tile to lay flat Mold warranty Dyelot mergeability warranty No damage to sub-floor can occur when carpet is removed Contact: Phil Botwinick 310-451-4191 Phil.Botwinick@interfaceflor.com SECTION 099100 - PAINTING Manufacturer: Dunn Edwards Primer: ULTRA-GRIP Premium UGPR00 Interior / Exterior Multi-Purpose Primer Interiors: EVEREST EVER50 Interior Semi-Gloss Paint (Standard Finish) Exteriors: EVERSHIELD EVSH10 Exterior Flat (Standard Finish) Doors/Windows: EVERSHIELD EVSH50 Exterior / Interior Semi-Gloss Paint Contact: Chuck Martin 805-712-0444 805-570-4401 chuck.martin@dunnedwards.com SECTION 101400 SIGNAGE Interior ADA Signage: 1/32” Rowmark single ply modified acrylic face plate with text pre-cut out of face mounted to 1/8” top-painted acrylic back plate. Text will be drop-fitted into place. Provide raster Grade II Braille at ADA signs. Surface texture to be matte finish. Mount signs to wall with double-sided foam type at perimeter of sign. Interior Non-ADA: Signage: 1/16” non-glare acrylic face plate that is backpainted with sub-surface engraved, paint filled text. Face plate to be mounted to 1/8” top-painted acrylic back plate. Surface texture to be matte finish. Mount signs to wall with double-sided foam type at perimeter of sign. Interior Sign Colors: Base Color: Rowmark ADA Alternative, 3X1-302 China Blue (matte) Text/Graphics: Rowmark ADA Alternative, 3X1-204 Bright White (matte) Parking Signage: Minimum 1/8” aluminum sheet with semi-gloss baked enamel or twocomponent acrylic polyurethane finish, mounted to galvanized steel posts. Provide beaded porcelain enamel finish at reflectorized signs. Base Color: 557 Imperial Blue Text/Graphics: 02 White Logos & Graphics: Information regarding college logos, colors and other official graphics can be obtained at http://www.sbcc.edu.marketing/ Page 6 of 19 SBCC DECLARED DISTRICT STANDARDS 05/22/2014 SECTION 101419 DIMENSIONAL LETTER SIGNAGE Dimensional Letters: Individual dimensional letters, stud mounted to wall. Painted aluminum cut in Helvetica Medium font type, ¼” thick with ¼” alum offset collars. Letter Color: Medium Bronze face and return Offset Color: Natural finish SECTION 102113 Manufacturer: TOILET COMPARTMENTS Bradley Mills Partitions (or approved equal). Toilet Compartments Sentinel Series 400 overhead-braced restroom compartments Urinal Screens Model No. 3 floor-anchored urinal screens. Material &Finish: 5WL Textured stainless steel finish. Hardware: Continuous SS spring-loaded hinges. Continuous SS U-brackets at walls and pilasters. SS surface-mounted ADA compliant slide latch & keeper. Doors ≤32” to have combination coat hook/door bumper. Doors >32” to have separate coat hook, door bumper and door pull. SECTION 102800 TOILET AND BATH ACCESSORIES Electric Hand Dryer: Dyson Airblade Model AB14 (@ Public RR only) Polycarbonate-ABS casing in gray finish with anti-microbial additive Input Voltage: 110-120V AC, single phase 60 Hz Rated Power: 1400W, 12.0A Standby Power Consumption: 1W Energy Consumption per Dry: 0.00468kwh Towel Dispenser: (@ Individual RR) Bobrick B-39167 Recessed Convertible Touch-Free Paper Towel Dispenser and Waste Receptacle (18 gallon) Toilet Tissue Dispenser: Kimberly Clark Model JRT 09612 Jumbo Roll Tissue Dispenser Seat Cover Dispenser: Georgia-Pacific Model 57710 Safe-T-Gard ½ Fold Seatcover Dispenser, White Sanitary Napkin Disposal: Rubbermaid Model 6140 Sanitary Napkin Receptacle with Rigid Liner, White Soap Dispenser: Spartan Model 9751 Lite ‘n Foamy Dispenser, White ADA Toilet Tissue Dispenser: Bobrick B-3888 (or approved equal) for fully recessed wall installation. Bobrick B-386 (or approved equal) for 2-sided partition installation. ADA Sanitary Napkin Disposal: Bobrick B-353 (or approved equal) for fully recessed wall installation. Bobrick B-354 (or approved equal) for 2-sided partition installation. Framed Mirror: Bobrick B-165 (or approved equal) Frameless mirrors should not be specified. Clothes Hook: Bobrick B-233 Clothes Hook (or approved equal). Locate near lavatories for hanging purses/backpacks. ADA Lavatory and: Sink Guards: IPS Corporation, TrueBro LavShield protective lavatory enclosure. IPS Corporation, TrueBro BasinGuard undersink protection. Page 7 of 19 SBCC DECLARED DISTRICT STANDARDS 05/22/2014 SECTION 115213 Manual Screens: PROJECTION SCREENS Draper Luma2 Front Projection Screen (or equal) SECTION 115216 Manufacturer: PROJECTOR MOUNTS Business Machine Security (www.LocDown.com) Drop Ceiling Plate ADJ-DCP 824 Adjustable mounting bracket plate installed above suspended acoustic tile with security cable and hanger wire support system to attach ceiling plate to structure above Maximum Load: 60 lbs. Clg Projector Mount: LCD LOC II Universal Mount Two interlocking steel trays to provide security and stability for LCD/DLP projectors. ±15° tilt, pitch, roll adjustments and 360° swivel Maximum Load: 150 lbs Color: Projector Grey (standard) Locking: High-security, pick resistant, five wafer, cylindrical screw type key lock at Drop Ceiling Plate and Projector Mount, keyed alike SECTION 129300 Benches: SITE FURNISHINGS DuMor, Inc.11 Series PL, 6’-0” long bench with “Cedar” recycled plastic slats withType S-1 mounting (18” deep support posts mounted in concrete) Bicycle Racks: Peak Racks, Inc. (www.PeakRacks.com) Campus Racks single or double-sided hot-dipped galvanized bike racks. SECTION 129323 Exteriors: TRASH AND LITTER RECEPTACLES Wausau Tile Precast Concrete Waste Container with security cable assembly Base: Model TF1875 with Weatherstone Sand B-3 finish Lids: Model TF1476 custom plastic double-sided dome top Trash: Brown 4 with custom “Landfill” mark-it logo one side Recycling: Blue 0 with custom “Recycling” mark-it logo one side Liner: Model 750153 (36 gallon) plastic liner Corridors & Public Spaces: Forms + Surfaces Model SLTRD-24L Triad Litter and Recycling Receptacle Color & Finish: Stainless Steel with Diamond Finish Lids: Black plastic with trapezoidal lid opening Graphics: Black background with custom text “Landfill” Blue background with standard text “Recycling” Page 8 of 19 SBCC DECLARED DISTRICT STANDARDS 05/22/2014 SECTION 142400 Manufacturer: HYDRAULIC ELEVATORS Republic Elevator Company or approved equal Elevator Type: Single direct acting hydraulic cylinder in well holes Rated Speed = 125 feet per minute Main Power Supply = 208 Volts, 3 phase, with separate equipment grounding conductor Operation: Nonproprietary programmable microprocessor-based controller (Motion 2000 by Motion Control Engineering or approved equal) with automatic operation by means of car and hall buttons. SECTION 232500 Manufacturer: HVAC WATER TREATMENT (FOR NEW SYSTEMS ONLY) Chem-Aqua is preferred water treatment vendor and should be consulted for all projects that have mechanical water treatment requirements. System Cleaner: (No Aluminum or) Galvanized Mtl) Chem-Aqua 61502 (sufactants, metasilicate, polyphosphate) at 2.5 gal per 1000 gal of system volume, and Chem-Aqua 11000 at 1 gal per 1000 gal of system water. Add FC-101 defoamer as needed. Circulate 12-24 hrs then drain and flush system. Iron Dispersant: Chem-Aqua CBD-95 at 1 gal per 1000 gal of system volume; circulate for 2 days then drain and flush system thoroughly System Passivation: Refill system, add Chem-Aqua 11000 at 1 gal per 1000 gal system volume. Circulate for 5-7 days. Drain and flush system. Recharge System: Use corrosion and scale inhibitor Chem-Aqua 999/777 sodium nitrite. By-Pass Pot Feeder Chem-Aqua-Aqua Pass Pot feeder w/filter 5 gallon capacity. Isolation valves and drain valve for pot feeder will be needed. SECTION 224213 Toilet: COMMERCIAL WATER CLOSETS AND URINALS American Standard - Madera – ADA – Floor mounted – White Model 3465.001 elongated, top spud with 4 bolts Toilet Seat: Olsonite model 95SSCT open front – no cover Toilet Flush Valve: Sloan Optima, 1.28 GPF, sensor operated Model 111-1.28 ES-S TMO hard wired w/ transformer for new construction Model 111-1.28 SMO battery powered for remodels Urinal: American Standard – Washbrook – ADA – White Model 6590.001, top spud. Urinal Flush Valve: Sloan Optima, 1.0 GPF, sensor operated Model 180-1.0 ES-S TMO hard wired w/ transformer for new construction Model 180-1.0 SMO battery powered for remodels Page 9 of 19 SBCC DECLARED DISTRICT STANDARDS SECTION 224216 Lavatories: 8” Centers: 4” Centers: Single Hole: Faucets: 8” Lav Faucet: 4” Lav Faucet: Lab Faucet: 05/22/2014 COMMERCIAL LAVATORIES AND SINKS American Standard – ADA – White Wall-mounted with concealed arms or wall hanger Lucerne Model 0356.015 wall-mount lavatory (District Standard) Murro Model 0958.900.020 wall-mount lav w/ shroud/knee contact guard Lucerne Model 0355.012 wall-mount lavatory (District Standard) Murro Model 0954.900.020 wall-mount lav w/ shroud/knee contact guard Lucerne Model 0356.421 wall-mount lavatory (District Standard) Murro Model 0955.000 wall-mount lavatory less shroud (Optional) (for installation with Dyson Airblade Tap Combo Hand Dryer/Faucet only) Chicago Faucets Model 404-VE2805-665ABCP, 0.5 gpm, metering, dual supply temperature, 8” centers, less than 0.25% total lead content Model 3500-4E2805ABCP, 0.5 gpm, metering, single supply temperature, 4” centers, less than 0.25% total lead content Model 930CP dual temperature faucet with GN2BVBJKABCP 6” gooseneck spout with vacuum breaker, single hole, 204PR handles and E7 serrated nozzle outlet (Note: Does not meet ADA requirements) SECTION 224700 Water Cooler with Bottle Fill Station: DRINKING FOUNTAINS AND WATER COOLERS Elkay EZH20 bottle filling station with bi-level filtered LZ cooler Model LZSTL8WSLK. Provide #51300C_3PK 3-pack replacement filters SECTION 230000 Chillers: HEATING, VENTILATING AND AIR CONDITIONING (HVAC) Trane, York, McQuay Air Handlers: Catalog: Custom: Trane, York, McQuay UMP, Temtrol, Haakon DX Unitary Packaged Rooftop Units: Trane, York, McQuay Commercial Split and Packaged Rooftop Units: Trane, York, McQuay VRF (Variable Refrigerant Flow) Systems: Mitsubishi, Trane Make Up Air Units: Greenheck, UMP, Modine Variable Air Volume (VAV) Units: Trane, York, McQuay Unit Ventilators: Trane, York, McQuay Blower Coil Air Handlers: Trane, York, McQuay, Magic Aire Make Up Air Gas Heating Systems: Reznor, Modine Boilers: Lochnivar (standard) Raypak (if required due to size limitations) Variable Frequency Drives (VFDs): Johnson for new equipment & replacement drives Valves and Actuators: Belimo or Johnson Elodrive waterproof type (for exposed to weather applications) Page 10 of 19 SBCC DECLARED DISTRICT STANDARDS 05/22/2014 SECTION 250000 Backbone System: ENERGY MANAGEMENT SYSTEM (EMS) JCI Metasys Field Devices JCI Facility Explorer FX 60/90 Building Supervisory Panels JCI NAE controllers not allowed Johnson DDC DX-9100 Controller for Lighting System at each building that controls outdoor lighting via time schedule in FX server and light sensor connected to controller Software: Niagara AX Platform using FX workbench software connected to existing campus-wide Ethernet network to be installed on owner-provided PC Field Devices –WGX9100, CCT Software All Software and Devices must be approved by SBCC Scope of Work: Provide and install all necessary conduit, wire, controllers, testing, programming, commissioning and interfacing to supervisory controllers. All new equipment to be interfaced with back bone system All FX supervisory panels will be programmed using complete commissioned field DDC controller software Points for each building’s controller will be mapped to that building’s FX supervisory panel which will be mapped to campus-wide FX server. System to automatically activate backup lighting schedule if network to controller from FX panel fails Provide separate data screen and separate graphic screen for each piece of equipment controlled by the DDC, also provide project floor plan graphics with schematics. All to match existing graphics at campus. Control Points: Air Moving Devices and Equipment Air Control Devices and Equipment Liquid Moving Devices and Equipment Liquid Control Devices and Equipment Package Single Zone AC w/ Gas Heat (CAV) Reheat or HW Heating Coils Variable Speed Drives w/ Electronic Bypass Electric Radiant Heaters EMS not required at Fans < 5 HP, Evaporative Coolers, Air Compressors, Kitchen Equipment or Domestic Hot Water Heaters SECTION 260000 Manufacturer: ELECTRICAL Square D Products Items: Main High Voltage Switch Gear (4160) Main Electrical Distribution Systems (I line, NF, NQ (bolt on) panels) Lighting Contactors (277V and 120V coils) Transformers (EE type, K-rated where required) Page 11 of 19 SBCC DECLARED DISTRICT STANDARDS 05/22/2014 SECTION 265100 LIGHTING Classroom Lighting: Focal Point Equation 2x4 Fixture or Ledalite PureFX 2x4 Fixture Lamps: LED lamps with CRI>80 are encouraged where available and within budget Fixtures using 4' T8 lamps are preferred where LED is not practical 4' T8 Lamps with SP41 Color are stocked on site & preferred for interiors High efficacy specialty lamps, such as T5HO, may be used in applications where LED and T8 are not practical (such as coves or large, high ceiling spaces where LED can't be made to work) Low efficacy Incandescent/Halogen/MR16/PAR lamps are discouraged except where needed for specific applications Fluorescent dimming is discouraged. LED (if no low end is required) or incandescent (for extremely low light levels) is preferred - minimize the amount of dimming through stepped switching where possible Exterior lighting is being converted to LED, and all new exterior lighting should be LED Lighting Controls: Watt Stopper, dual technology motion sensors: 1. Ceiling sensors with wall manual control for large areas 2. Wall mounted, dual switched wall plates for small rooms and offices Exit Signs: Depending on application, three types are allowed. All signs shall have green lettering (or background for the tritium based signs) Specification grade, brushed aluminum face, LED lighting with battery backup and self-diagnostics (equal to Lithonia LES series) Specification grade, mirrored glass(acrylic), LED lighting with battery backup and self-diagnostics (equal to Lithonia LRP series) Tritium based, self-luminous with green faceplate, 20 year life minimum (equal to Isolite SLX-60 series) Exterior Pole Lights: Gardco Pole Lights, Hardtop, MP or Side Mount 8’, 10’, 15’, or 25’ Poles with BRA Finish LED or HPS Lamp, if no LED option, Multi-Tap, Mogal Base Bega Model 8878P Poles and Fixtures (Single or Twin Fixture) Bega Model 890C Anchorage Exterior Decorative: Teka, various styles Bega, various styles Exterior Wall Packs: Hubbell, various styles, with LED Lamps (HPS if LED not available) Step/Walk Lights: Devine Contacts: Mar Vista Sales Steve Dominguez Prudential Dave Relyea 805-642-7714 steve@marvistasales.com 805-598-3973 drelyea@plpnorth.com Page 12 of 19 SBCC DECLARED DISTRICT STANDARDS 05/22/2014 SECTION 270000 Data Closets: DATA AND VOICE COMMUNICATIONS, GENERAL Provide minimum of one data closet per floor All computers wired to data closet on same floor Data closets to be on generator circuit for emergency power Data closets to be air conditioned A/C to switch to emergency power during outages Cable TV: Cable and satellite TV to tie into head end at Administration Building Data at Offices: Telephones: Provide one duplex data jack at every power outlet in offices All telephone wiring to be Cat6 cabling run over the data network Provide one 25-pair copper phone line from each building to phone room in Administration Building. Emergency announcements made over phone system (no separate PA) Provide one telephone at each instructor station and office Contact: SBCC IT Department Paul Bishop 805-965-0581x2213 pwbishop@sbcc.edu SECTION 271113 Protector Panels: COMMUNICATIONS ENTRANCE PROTECTION Commscope/Systimax (489 type) Circa (189 type) or prior approved equal SECTION 271116 Rack-Mounted Fiber Enclosures: COMMUNICATIONS CABINETS, RACKS, FRAMES & ENCLOSURES Provide at equipment rack/cabinet locations Commscope (RFE-FXC/RFE-FXD products) Leviton (Lightspace DPS/DPC products) OFS (LST/LSS products) Wall-Mounted Fiber Enclosure Provide in basement of Administration Building Leviton (Lightspace CPC-48) or equivalent products by Commscope or OFS Cabinets: Dell PowerEdge 4210 (or approved equal) Racks: Chatsworth (55053-703) Cooper B-Line (SB-556-084-XUFB) Hoffman (E-DR19FM45U) SECTION 271119 Manufacturers: COMMUNICATIONS TERMINATION BLOCKS AND PATCH PANELS Amp Hubbell Panduit or prior approved equal Page 13 of 19 SBCC DECLARED DISTRICT STANDARDS 05/22/2014 SECTION 271123 Vertical Cable Management: COMMUNICATIONS CABLE MANAGEMENT AND LADDER RACKS Chatsworth (30163-703 for 10”, 30162-703 for 6”) Panduit (PatchRunner™) or prior approved equal Horizontal Cable Management: Chatsworth (30330-719) Systimax (HCM2U) or prior approved equal Patch Panel Wire Management: 19” rack mountable Chatsworth (12176-701) or equal from patch panel manufacturer Ladder Rack: Chatsworth (11275-718) Cooper B-Line (SB-17-18-FB) Mono-Systems (MR-17T-18-PB) SECTION 271126 Power Strips: COMMUNICATIONS RACK MOUNTED POWER PROTECTION AND POWER STRIPS Chatsworth (12816-705) or approved equal SECTION 271313 Underground Voice Backbone Cabling: COMMUNICATIONS COPPER BACKBONE CABLING Superior Essex (09-097-02) Or equivalent by Belden or General Cable Plenum Voice Backbone Cabling: Superior Essex (18-599-33) or equivalent by Berk-Tek or General Cable SECTION 271323 Fiber, General: COMMUNICATIONS OPTICAL FIBER BACKBONE CABLE Provide 50/125µm multi-mode optical fiber backbone cabling to each building that terminates in NW corner of Administration building basement Fiber Cabling: (Multi-Mode) Exterior Cabling: Corning Commscope O-012-LA-5K-F12NS (or equal) Interior Cabling: Corning Commscope P-012-DS-5L-FSU-AQ (or equal) (Adjust product numbers according to strand counts as required) Fiber Cabling: (Single-Mode) Exterior Cabling: Corning Commscope O-012-LA-8W-F12NS (or equal) Interior Cabling: Corning Commscope P-012-DS-8W-FSU-YL (or equal) (Adjust product numbers according to strand counts as required) SECTION 271513 Product: COMMUNICATIONS COPPER HORIZONTAL CABLING Category 6A cable utilized for horizontal voice and data cabling Manufacturers: ADC (10G-A6TP-WT02) Hubbell (DBASPW) or equivalent by AMP or Belden Page 14 of 19 SBCC DECLARED DISTRICT STANDARDS 05/22/2014 SECTION 275313 Manufacturer: CLOCK SYSTEMS Visiplex Clocks: 14” Wireless Synchronized Analog Clock with Custom SBCC Logo Face Model TS-CLK-1462S Transmitter: Model TS101-100 Wireless Encoder: Model TS2800 Contact: Simplex Grinnell Jim Faltemier 805-642-0366 jfaltemier@simplexgrinnell.com SECTION 281300 Section Includes: ACCESS CONTROL Access control devices installed at door openings and provided as part of a security system. 1. A complete access control system as described in the Specifications and as detailed on the Drawings 2. Complete system is defined as all work required to install the access control system described herein and on the Drawings including, but not limited to: all electrical, conduit, conduit stubs, cables, cabling, connectors, terminations, risers, back boxes, junction boxes, security junction boxes, security terminal cabinets (STC), card readers, Integrated Card Reader Locksets, system software licenses, alarm contacts, controllers, access control panels, power supplies, transformers, power distribution boards, batteries, enclosures, tamper switches, latches and locks, mounts, electrified door hardware and connection to electrified door hardware Related Sections: Section 087100 “Door Hardware” Section 087113 “Automatic Door Operators” Software: Wireless locks programmed for use with Allegion Blackboard Transact Electronic Locks: (Networked) Wireless Cylindrical: Wireless Mortise Wireless Rim Panic: Wireless SVR Panic: For Hard-Wire Locks: Com Cover w/ IPB: Infa-Red Scanner: Schlage Electronic Scan II White/Black. Schlage AD-400-CY-MT-50-JD RHO Schlage AD-400-MS-MT-50-JD RHO Schlage AD-400-993R-MT-50-JD RHO Schlage AD-400-993S-MT-50-JD RHO Substitute “300” for the “400” series listed above Schlage Kit #46928875 for AD-400-CY locks, converts function from 70 “Classroom/Storeroom” to 50 “Office” Door Position Switch: Schlage Electronics 679-05 HM/WD. Controllers: Master Controller: Blackboard SA 3000. Door Controller: Blackboard SA 3032, 1 for each hard-wired door. Provide SA series power supply and enclosure Card Reader: Blackboard DR4100 Hybrid Door Reader - Sony FeliCa contactless ISO 18092 compliant with 3-track HiCo mag stripe read head IR Panel Interface Module (PIM): Schlage PIM 400-485 Electric Latch (EL) Retraction Kits: Retrofit/Conversion: Von Duprin EL Kit, 3 feet or 4 feet For New Work: Von Duprin Computer Lock, CL993 Page 15 of 19 SBCC DECLARED DISTRICT STANDARDS 05/22/2014 SECTION 281300 IR Power Supply: ACCESS CONTROL – continued For Panic Devices: Von Duprin PS914-2RS For Doors Operators: Von Duprin PS914-4RL Contact: Integrated Door Systems Bob Simpson (805) 693-9299 (805) 693-9719 fax SECTION 281600 Control Panel: INTRUSION DETECTION SYSTEM Digital Monitoring Products (DMP) Model XR500 Series 574-Zone Command Processor Panel Keypads: Digital Monitoring Products (DMP) Series 7000 Thinline LCD Keypad Door Contacts: Sentrol 1078 Series GE 1078/1076 Series Contact: Bay Alarm Company Rick Prinz 805-662-2714 rick.prinz@bayalarm.com SECTION 282300 Camera & Housing: VIDEO SURVEILLANCE SYSTEM Bosch VDN-495 Series Camera Power: Altronix ALTV2316350 DVR: Bosch DiBos Model DB30C5160R2 Monitor/Keyboard: Orion 17RTC in Rack Mounted Assembly 17” LCD with 1280 x 1024 Resolution with Built-In Speakers NTSC/PAL Video System Multiple Video Input/Output (2 BNC, 1 S-Video), VGA, Component and HDMI Input Contact: Bay Alarm Company Rick Prinz 805-662-2714 rick.prinz@bayalarm.com SECTION 283100 Manufacturer: FIRE DETECTION AND ALARM Simplex Grinnell Equipment: 4100-9111 FACP Panel and Cabinet 4010-9101 FACP Panel 4098-9714 Smoke Detector (addressable, requires 4098-9792 base) 4098-9733 Heat Detector (addressable, requires 4098-9292 base) 4098-9751 In-Line Duct Detector (for usage with smoke/fire dampers) 4098-9756 Tube-Style Duct Detector (for usage on HVAC equipment) 4090-9001 Addressable IAM Monitor Module (for sprinkler connections) 4090-9002 Addressable Relay Module (for elevator recall connections) 4096-9101 Multi-Candela Strobe (typical, various types available) 4096-9128 Multi-Candela Horn/Strobe (typical, various types available) Contact: Jim Faltemier 805-642-0366 Page 16 of 19 jfaltemier@simplexgrinnell.com SBCC DECLARED DISTRICT STANDARDS 05/22/2014 SECTION 323000 Skate Stops: SITE IMPROVEMENTS Required on all site walls and curbs accessible to skateboarders Exact locations to be determined by project team Manufacturer: Skatestoppers by Intellicept 619-447-6374 www.skatestoppers.com New Concrete: (Cast-In-Place) F2 Series, aluminum ½” radius trowel maximum and ½” chamfer maximum Existing Concrete: (Surface Mount) FA Series (fixed angle), aluminum FR Series (fixed radius), aluminum Masonry/Precast: Insert Series Cast Bronze with brown patina or White Tombasil (white brass) SECTION 320523 Manufacturer: CEMENT AND CONCRETE FOR EXTERIOR IMPROVEMENTS (COLORED CONCRETE FOR SIDEWALKS, STAIRS & PLANTERS) Solomon Colors, Inc. (or approved equal) 866-747-2656 www.solomoncolors.com Color Pigment: SGS Integral Colors Dry Pigment Ready Mix Color: 750 Desert Tan Field Mockup: Provide at least one mockup to verify match to existing colored concrete SECTION 321413 Manufacturer: PRECAST CONCRETE UNIT PAVING Belgard / Sierra Building Products 909-355-6422 / 866-749-3038 www.belgardcalifornia.com Concrete Pavers: Cambridge Collection untumbled interlocking concrete pavers I-Pattern (75% rectangular, 25% square) 2-3/8” x 5-7/8” x 7-7/8” rectangular 2-3/8” x 5-7/8” x 5-7/8” square Colors: 60% Bella Blend, 20% Toscana Blend, 20% Sahara Blend Local Distributor: Stoneyard Building Materials 805-962-9511 www.stoneyardbuilding.com SECTION 321726 Manufacturer: TACTILE WARNING SURFACING Wausau Tile (or approved equal) Warning Tiles: ADA-3 Pavers, nominal 12 by 12 inches square with 1.67-inch spacing straight dome pattern. Color: ADA-70 Contact: Jeff Wren 909-628-4296 Page 17 of 19 wrenco@live.com SBCC DECLARED DISTRICT STANDARDS 05/22/2014 SECTION 328400 Controllers: PLANTING IRRIGATION Rainmaster RME (or equal) Valves: Rainbird EFA-CP, brass Rainbird EFA-CP-PRS, brass Superior Mod 950, brass Wire: 14 gauge minimum Where multiple controllers are used, color code each common wire and use different color control wires Pipe: Main lines shall be Class 315 PVC for pipes 2” and larger Main lines shall be Schedule 40 PVC for pipes 1-1/2” and smaller Lateral lines shall be Schedule 40 PVC Sleeves shall be Schedule 40 PVC All pipe shall be colored appropriately according to supply source Backflow Device: Shall be on approved list of Water Agency Master Valves: Hardie 102 Series or 123 Series as required Quick Couplers: Nelson 1” Model 7642, 7643, 7644 and 7655 Booster Pumps: Constant-Flow by Southern California Pump Sales (or equal) Great Valves: Nibco T-113 or Equal, brass Wire Connectors: 24 Volt - Rainbird “Snap-Tite” (or equal) Backflow Enclosure: Strong Box SS (or equal) Pressure Regulators: Wilkins 500 Series (or equal) Irrigation, General: For all areas under 5’ x 5’ pop bubblers or drip are the preferred delivery method. All future or retro-fitted planting beds should use bubblers. All sprinkler applications must minimize surface water runoff and provide head-to-head coverage. MP rotors should be considered first and used whenever possible. Heads: Hunter MP Rotator 1000, 2000 and 3000 Series Hunter 1-40 Rotors Hunter 1-20 Rotors Toro 300 Series Rainbird 1800 Series SAM-PRS Rainbird 1402 Bubblers Rainbird 5000 PRS Series SECTION 329200 Turfgrass Sod: TURF AND GRASSES Southland Sod Marathon II Sod, Dwarf Tall Fescue Page 18 of 19 SBCC DECLARED DISTRICT STANDARDS 05/22/2014 SECTION 329300 General Planting: PLANTS Do not use plants on the Cal-IPC invasive plants list. For reference: http://www.cal-ipc.org/ip/inventory/pdf/Inventory1999.pdf Special Trees: The following are a list of trees that can not be planted without special exemption from the College: Eucalyptus sp Corymbia sp Pinus Pinea Washingtonia sp Ceratonia sp Platanus acerifolia Ficus sp END OF DISTRICT STANDARDS Page 19 of 19
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Julie Create Date : 2014:05:22 12:15:24-07:00 Modify Date : 2014:05:22 12:15:24-07:00 XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Producer : Acrobat Distiller 10.1.9 (Windows) Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - 10021_SBCC District Standard Specification Sections.docx Creator : Julie Document ID : uuid:1c85a9b8-9e21-4f52-955a-9a8873b4536c Instance ID : uuid:5f7c4097-2660-4ef5-927a-1de271a948a5 Page Count : 19EXIF Metadata provided by EXIF.tools