SCP 01 Instructions SCP01

SCP01-2 SCP01-2

SCP01-1 SCP01-1

User Manual: SCP01

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

WARNING: Always check your wiring before
turning on a circuit. Never leave a circuit
unattended while the batteries are installed.
Never connect additional batteries or any other
power sources to your circuits.

Musical Recorder
Model SCP-01

WARNING: SHOCK HAZARD Never connect Snap Circuits
to the electrical outlets in your
home in any way!

Project #2
Eraser

Note

You can erase the recording you made by removing the
microphone (X1) from project #1. Turn on the slide switch
(S1), you hear a beep signaling that the IC begins recording,
then turn it off. The previous recording is now erased. Press
the press switch (S2) for playback and there should be no
recording before the music starts.

Project #3
Playing Music

Project #1

Musical Recorder

The Snap Circuits Kit uses electronic blocks that snap onto a clear plastic base grid to build
different circuits. These blocks have different colors and numbers on them so that you can
easily identify them. Build the circuit shown by placing all the parts with a black 1 next to them
on the clear plastic base grid first. Then, assemble parts marked with a 2, and finally parts
marked with a 3. Install three (3) “AA” batteries (not included) into the battery holder (B3).

Modify the circuit shown by removing the microphone (X1)
and the slide switch (S1). Press the press switch (S2) to
start the first song. When the music stops, press the press
switch again to hear the second song. When the second
song stops, press the press switch again to hear the third
song. If you press the press switch before the song is over
the music will stop.

Turn on the slide switch (S1), you hear a beep signaling that you may begin recording. Talk
into the microphone (X1) up to 8 seconds, and then turn off the switch (it also beeps after the
8 seconds expire).

Project #4
Loudness Control

Press the press switch (S2) for playback. It plays the recording you made followed by one of
three songs. If you press the press switch before the song is over, the music will stop. You may
press the press switch several times to play all three songs.

Modify the circuit in project #3 by replacing the 3-snap
across points A & B with the microphone (X1). Press the
press switch (S2) for playback and the music is not as loud.

If you have any problems, contact Elenco®
Copyright © 2005 Elenco Electronics, Inc. All Rights Reserved. • 150 Carpenter Ave. • Wheeling, IL 60090
(800) 533-2441 Fax: (847) 520-0085 • e-mail: elenco@elenco.com • Web site: www.elenco.com or www.snapcircuits.net
®

753140

OTHER SNAP CIRCUITS PRODUCTS!
Contact Elenco® to find out where you can purchase these products.

Snap Circuits Jr. Model SC-100
Build over 100 projects, contains over 30 parts.

Snap Circuits Model SC-300
Build over 300 projects, contains over 60 parts.

PARTS LIST
Qty.
r1
r3
r5
r3
r1
r1
r1
r1
r1
r1
r1
r1
r1

ID
1
2
3
6
D3
B3
Q2
S1
S2
SP
U6
X1

Name
Part #
Base grid
6SCBGM
1-snap wire
6SC01
2-snap wire
6SC02
3-snap wire
6SC03
6-snap wire
6SC06
Diode
6SCD3
Battery holder
6SCB3
NPN transistor
6SCQ1
Slide switch
6SCS1
Press switch
6SCS2
Speaker
6SCSP
Recording IC
6SCU6
Microphone
6SCX1

Important: If any parts are missing or
damaged, DO NOT RETURN TO RETAILER.
Call toll-free (800) 533-2441 or e-mail us at:
help@elenco.com.
Customer Service • 150 Carpenter Ave. •
Wheeling, IL 60090 U.S.A.
You may order additional / replacement parts
at our web site: www.snapcircuits.net

BATTERIES:

Snap Circuits Pro

Model SC-500
Build over 500 projects, contains over 75 parts.

Snap Circuits Extreme

Model SC-750
Build over 750 projects, contains over 80 parts, and PC interface included.

FM Radio

Motion Detector

Music Box

Space Battle

Flying Saucer

Model SCP-02

Model SCP-03

Model SCP-04

Model SCP-05

Model SCP-06

Use only 1.5V AA type (not included).
Insert batteries with correct polarity.
Non-rechargeable batteries should not
be recharged. Rechargeable batteries
should only be charged under adult
supervision, and should not be
recharged while in the product. Do not
mix alkaline, standard (carbon-zinc), or
rechargeable
(nickel-cadmium)
batteries. Remove batteries when they
are used up. Do not short circuit the
battery terminals. Never throw batteries
in a fire or attempt to open its outer
casing.
Batteries are harmful if
swallowed, so keep away from small
children.



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-14, framework 1.6
About                           : uuid:12f282ba-1012-4cd2-8e49-bbb58845e2cb
Producer                        : QuarkXPress(tm) 6.1
X Press Private                 : %%DocumentProcessColors: Cyan Magenta Yellow Black.%%DocumentCustomColors: (PANTONE 286 C).%%+ (PANTONE 185 C).%%+ (PANTONE Process Yellow C).%%+ (PANTONE 347 C).%%CMYKCustomColor: 1 .66 0 .02 (PANTONE 286 C).%%+ 0 .91 .76 0 (PANTONE 185 C).%%+ 0 0 1 0 (PANTONE Process Yellow C).%%+ 1 0 .86 .03 (PANTONE 347 C).%%EndComments
Create Date                     : 2005:03:10 16:20:09Z
Creator Tool                    : QuarkXPress(tm) 6.1
Modify Date                     : 2006:02:08 16:32:11-06:00
Metadata Date                   : 2006:02:08 16:32:11-06:00
Document ID                     : uuid:e8ee9aac-1278-46d7-9d35-47e20e6bf486
Format                          : application/pdf
Title                           : SCP-01 Instructions
Creator                         : QuarkXPress(tm) 6.1

EXIF Metadata provided by EXIF.tools