STG 600 Data Sheet Brochure

User Manual: STG-600-Data-Sheet-Brochure

Open the PDF directly: View PDF .
Page Count: 2

Download
Open PDF In Browser	View PDF

STG 600

BAUR surge and test generator
Functions
▪▪ Cable testing with DC voltage
▪▪ Acoustic pin-pointing
▪▪ Step voltage method for pin-pointing cable
sheath faults
▪▪ Insulation resistance measurement*
▪▪ SIM/MIM Secondary/multiple impulse
method*
Features
▪▪ Output voltage in adjustable 0.1-kV steps
▪▪ Automatic short-circuit and breakdown
detection in test mode
▪▪ Comprehensive safety concept in accordance
with the latest standards

Compact system with many functions
↗↗ Specifically for use in low-voltage networks
↗↗ Single system for cable testing and fault location
↗↗ High surge energy: 600 or 1000 J*
↗↗ Light, compact and transportable

▪▪ Two separate discharge units for cable and
internal surge capacitor
▪▪ Voltage-proof up to AC 400 V*
▪▪ Simple operation and self-explanatory
menu navigation in several languages
▪▪ Switch between operation functions at the
press of a button
▪▪ Built-in cable compartment
▪▪ Protective cover for the control panel

The STG 600 surge and test generator is used for cable testing as well as for precise
pin-pointing of faults of all types in low voltage cables.
The optional SIM/MIM coupling filter and the IRG 2000 time domain reflectometer

*Option

make the most effective pre-location methods SIM/MIM (Secondary/multiple
impulse method) and time domain reflectometer available. This allows the precise
location of both high-resistive and low-resistive cable faults.
Thanks to the intuitive operation and operator-friendly menu navigation, cable fault
location with the STG 600 is quick and easy.

BAUR GmbH · Raiffeisenstraße 8, 6832 Sulz, Austria · T +43 (0)5522 4941-0 · F +43 (0)5522 4941-3 · headoffice@baur.at · www.baur.eu

Technical data
Cable testing

General

DC voltage (negative)

0.2 – 5 kV

Max. output current (negative)

300 mA

Test time

0.5 min – 60 min or continuous operation

Acoustic pin-pointing
DC voltage (negative)

0.2 – 4 kV

Max. surge energy

600 J

Display

Colour-LCD, screen resolution 160 x 80
pixels

User interface languages

Dutch, English, French, German, Italian,
Spanish

Power supply

200 – 260 V, 50/60 Hz

Option

100 – 130 V, 50/60 Hz
(with isolation transformer)

1000 J (see the section“Options”)

Max. power consumption

800 VA

1 - 30 pulses/min, single surge
Standard setting: 20 pulses

Relative humidity

≤ 85%, non-condensing
0 °C to +50 °C

Step voltage method (sheath fault location)

Ambient temperature (operational)

DC voltage (negative)

0.2 – 5 kV

Storage temperature

-20°C to +60°C

Max. output current (negative)

700 mA

Dimensions (W x H x D)

Approx. 483 x 267 x 680 mm

Pulse rate

5 selectable programmes

Weight

Approx. 44 kg

Measuring time

0.5 min – 60 min or continuous
operation

Safety and EMC

CE-compliant in accordance with Low
Voltage Directive (2014/35/EU),
EMC Directive (2014/30/EU),
EN 60068-2-ff Environmental testing

Option
Surge sequence

Options
Increase in surge energy:
Surge energy

1000 J

Surge sequence

1 – 20 pulses/min, single surge

Max. power consumption

1200 VA

Insulation resistance
measurement

0.1 kOhm – 100 MOhm

Voltage-proof

up to 400 V, 50/60 Hz in all operating
modes

Standard delivery

Options

▪▪ STG 600 surge and test generator,
incl. HV connection cable, 5 m

▪▪ Increase in surge energy to 1000 J (instead of 600 J)

▪▪ Isolation transformer 230 V; 1.2 kVA

▪▪ SIM/MIM coupling filter (only in combination with the IRG 2000)

▪▪ Earth cable, 4 m, with earthing terminal and operational earthing
▪▪ Protective cover for front plate
▪▪ Mains supply cord 2.5 m
▪▪ User manual

Data sheet: BAUR GmbH · 826-051-4 · 07.2016 · Subject to modifications

▪▪ IRG 2000 time domain reflectometer
▪▪ Fixing device for fastening of IRG 2000 to STG 600
▪▪ Insulation resistance measurement for the STG 600
▪▪ Reverse voltage protected HV output (AC 0 – 400 V)
▪▪ Isolation transformer 115/230 V; 1.2 kVA



---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Encryption                      : Standard V4.4 (128-bit)
User Access                     : Print, Copy, Annotate, Fill forms, Extract, Print high-res
Create Date                     : 2016:07:26 13:27:04+02:00
Creator                         : Adobe InDesign CS6 (Windows)
Modify Date                     : 2018:01:11 11:10:42+01:00
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26
Metadata Date                   : 2018:01:11 11:10:42+01:00
Creator Tool                    : Adobe InDesign CS6 (Windows)
Instance ID                     : uuid:3a791d2e-67bb-4322-9a12-f724f05ea5ce
Original Document ID            : xmp.did:7EE2B9CC372068118083E8C7FDADF317
Document ID                     : xmp.id:F42EC9C82353E61187E4DCAB4380FD4C
Rendition Class                 : proof:pdf
Derived From Instance ID        : xmp.iid:F32EC9C82353E61187E4DCAB4380FD4C
Derived From Document ID        : xmp.did:F24606882253E61187E4DCAB4380FD4C
Derived From Original Document ID: xmp.did:7EE2B9CC372068118083E8C7FDADF317
Derived From Rendition Class    : default
History Action                  : converted
History Parameters              : from application/x-indesign to application/pdf
History Software Agent          : Adobe InDesign CS6 (Windows)
History Changed                 : /
History When                    : 2016:07:26 13:27:04+02:00
Format                          : application/pdf
Producer                        : Adobe PDF Library 10.0.1
Trapped                         : False
Page Layout                     : SinglePage
Page Count                      : 2

EXIF Metadata provided by EXIF.tools