Discovery Kit For STM32F429/439 Lines STM32F429I DISCO USER GUIDE

• Figure 1. STM32F429 Discovery board
• 1 Conventions
• 2 Quick start
  • 2.1 Getting started
  • 2.2 System requirements
  • 2.3 Development toolchain supporting the STM32F429 Discovery kit
  • 2.4 Order code
• 3 Features
• 4 Hardware layout
• Figure 1. Hardware block diagram
• Figure 2. Top layout
• Figure 3. Bottom layout
  • 4.1 STM32F429ZIT6 microcontroller
• Figure 4. STM32F429ZIT6 package
• Figure 5. STM32F429ZIT6 block diagram
  • 4.2 Embedded ST-LINK/V2
• Figure 6. Typical configuration
  • 4.2.1 Using ST-LINK/V2 to program/debug the STM32F429ZIT6 on board
• Figure 7. STM32F429 Discovery board connections image
  • 4.2.2 Using ST-LINK/V2 to program/debug an external STM32 application
• Figure 8. ST-LINK/V2 connections image
  • 4.3 Power supply and power selection
  • 4.4 LEDs
  • 4.5 Pushbuttons
  • 4.6 USB OTG supported
  • 4.7 Gyroscope MEMS (ST MEMS L3GD20)
  • 4.8 TFT LCD (Thin-film-transistor liquid-crystal display)
  • 4.9 64-Mbit SDRAM (1Mbit x 16-bit x 4-bank)
  • 4.10 JP3 (Idd)
  • 4.11 OSC clock
    • 4.11.1 OSC clock supply
    • 4.11.2 OSC 32 KHz clock supply
  • 4.12 Solder bridges
  • 4.13 Extension connectors
• 5 Mechanical drawing
• Figure 9. STM32F429 Discovery board mechanical drawing
• 6 Electrical schematics
• Figure 10. STM32F429 Discovery board
• Figure 11. ST-LINK/V2 (SWD only)
• Figure 12. USB OTG_FS
• Figure 13. SDRAM 64 Mbits
• Figure 14. STM32F429ZIT6 MCU
• Figure 15. Peripherals
• Figure 16. LCD 2.4”
• 7 Revision history