ST TC1

User Manual: ST-TC1

Open the PDF directly: View PDF PDF.
Page Count: 2

DownloadST-TC1
Open PDF In BrowserView PDF
STICK-ON SERIES
®

Model ST-TC1
Telephone System Coupler
ANYWHERE YOU NEED...
•
•
•
•

To Simulate a Telco CO Line
To Add Radio Control or Paging to KSU
Contact Closure when Line is Selected
Audio Input / Output from Telephone
Switching Unit

You Need The ST-TC1!
The ST-TC1 is part of the STICK-ON series from Radio Design Labs. The durable adhesives permit quick,
permanent or removable mounting nearly anywhere or it may be used with RDL’s racking accessories.
APPLICATION: The ST-TC1 is primarily intended to connect to an on-site telephone system switching
(KSU). Connections from the ST-TC1 go into the KSU as if the ST-TC1 was an incoming phone line.
When the KSU seizes the line to the ST-TC1, a relay contact closure is provided which can be used to
control a variety of equipment, such as a paging system or radio system. The closure is maintained as
long as the line is seized. A 600 Ω transformer-isolated audio feed is available for audio to or from the
telephone switching unit. The ST-TC1 will pass DTMF audio from a telephone keypad or other DTMF
generating device.
The ST-TC1 may be utilized to add paging zones or a radio system interface to a telephone system.
When any instrument in the telephone system picks up the line associated with the ST-TC1, the relay
closes to activate the radio or paging function, and the audio spoken into the handset appears at the
BAL-AUDIO terminals. The ST-TC1 can not be connected to a phone line that has ringer voltage present.
The ST-TC1 can be used in conjunction with RDL’s ST-VOX1 modules to provide two-way
communication. The ST-VOX1 will provide the necessary push-to-talk function to key the two-way
communications systems.

RDL • 659 N. 6th St. • Prescott, AZ., USA 86301 • (928) 443-9391 • FAX (928) 443-9392 • www.rdlnet.com

STICK-ON SERIES
®

Installation/Operation
EN55103-1 E1-E5; EN55103-2 E1-E4
Typical Performance reflects product at publication time
exclusive of EMC data, if any, supplied with product.
Specifications are subject to change without notice.

Model ST-TC1
Telephone System Coupler
Incoming
Lines from
Phone
Company

TELEPHONE SYSTEM COUPLER

PWR

On-Site
Telephone
Switching
System

BAL
AUDIO

"LINE"
TO
PHONE
EQUIP

LINE 1
LINE 2

LINE 4
LINE 5
LINE 6

Use the BAL AUDIO terminals
to either connect to the
line-level input or output of
audio devices such as a paging
system, radio, or a monitor.

Connection
to Phone
Instruments

1

2

3

1

2

3

1

2

3

4

5

6

4

5

6

4

5

6

891-0023J

WARNING: Do NOT connect the
ST-TC1 directly to a
telephone-company phone line or
any phone line with ringer voltage
present.

In this example, selecting LINE 6 on any instrument
will activate the relay inside the ST-TC1 and will
make the BAL AUDIO connection available to that
instrument. If the BAL AUDIO terminals on the
ST-TC1 are connected to a paging input of an
amplifier system, then any phone instrument may
initiate an audio page by selecting LINE 6 and then
speaking.

TYPICAL PERFORMANCE
Line Connection:
Audio In/Out Impedance:
Switching Contacts:
Maximum Switching Power:
Supply Input:
Dimensions:

Note:

PWR

Use relay contacts to
trigger paging or radio
system.

Balanced
Audio Input
or Output

LINE 3

TELEPHONE SYSTEM COUPLER

BAL
AUDIO

"LINE"
TO
PHONE
EQUIP

Use relay contacts to
trigger paging or radio
system.
Balanced
Audio Input
or Output
In this example, The
ST-TC1's relay will
energize when the
phone handset is
taken off hook. The
relay will de-energize
when the handset is
returned to the
on-hook position.
DTMF audio can be
passed through the
BAL AUDIO
connection from the
phone keypad or
other DTMF
generating devices.

Simulated telco central office line to feed telephone system.
600 Ω balanced
Double-Pole, Double-Throw
60 W (220 Vdc, 125 Vac, 2 A)
24 to 33 Vdc @ 50 mA, Ground-referenced
Height:
1.55 in
3.94 cm
Width:
3.00 in
7.62 cm
Depth:
0.65 in
1.65 cm
Do not connect ST-TC1 directly to a telephone-company phone line, or any
phone line that has ringer voltage present.

Radio Design Labs Technical Support Centers
U.S.A. (800) 933-1780, (928) 778-3554; Fax: (928) 778-3506
Europe [NH Amsterdam] (++31) 20-6238 983; Fax: (++31) 20-6225-287
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Create Date                     : 2006:08:11 13:46:37-07:00
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2006:08:11 13:46:37-07:00
Format                          : application/pdf
Creator                         : ralph
Title                           : Microsoft Word - ST-TC1.doc
Document ID                     : uuid:edf5df31-54e2-4888-9087-eee6d03b661b
Instance ID                     : uuid:3781f820-8e39-4b41-8561-65c35ca84680
Page Count                      : 2
Author                          : ralph
EXIF Metadata provided by EXIF.tools

Navigation menu